Neues YouTube-Video: Visualisierung im Devices-Adapter

[THWE12]

@wendy2702 said in Nicht alle Instanzen werden angezeigt:

Hast du im Admin irgendwelche Security sachen eingestellt oder eventuell hier einen haken gesetzt:

Ne leider nicht

[wendy2702]

Irgendwelche Add Blocker oder Ähnliches?

Virenscanner mit Browserschutz?

Wenn möglich dem Hinweis von @Glasfaser folgen und mal per Kabel anschließen.

Auf was für einer HW läuft der ioBroker ?

[Glasfaser]

@thwe12

Wenn die Seite noch nicht ganz aufgebaut ist , dann kommt bei mir auch das Host Symbol.

Deshalb die frage nach einer festen Verbindung .
.

[THWE12]

@wendy2702 said in Nicht alle Instanzen werden angezeigt:

Irgendwelche Add Blocker oder Ähnliches?

Virenscanner mit Browserschutz?

Wenn möglich dem Hinweis von @Glasfaser folgen und mal per Kabel anschließen.

Auf was für einer HW läuft der ioBroker ?

Problem habe ich mit egal welchem System ich die Seite aufrufe.

Win7 und Win10 PC /IPad/ IPhone/ Android Tab. / Win 10 Notebook von der Arbeit / immer das gleiche.

Es ist ein PI4 den ich jetzt auf LAN umgestellt habe.

Gleiche Übersicht :-(

[Homoran]

@thwe12 sagte in Nicht alle Instanzen werden angezeigt:

Es ist ein PI4 den ich jetzt auf LAN umgestellt habe.
Gleiche Übersicht

Hast du denn inzwischen alle updates gemacht - oder doch nur den upload?

@homoran sagte in Nicht alle Instanzen werden angezeigt:

was sagt iobroker update?

[THWE12]

@homoran said in Nicht alle Instanzen werden angezeigt:

@thwe12 sagte in Nicht alle Instanzen werden angezeigt:

Es ist ein PI4 den ich jetzt auf LAN umgestellt habe.
Gleiche Übersicht

Hast du denn inzwischen alle updates gemacht - oder doch nur den upload?

@homoran sagte in Nicht alle Instanzen werden angezeigt:

was sagt iobroker update?

Ich habe alle Updates gemacht außer Bluetooth Low Energy
wenn ich den Update bekomme ich keine Kommunikation mit den Sensoren da bleibe ich bei 0.11.3 die funktioniert.

[Homoran]

@thwe12 und was sagt iobroker update denn jetzt?

[Glasfaser]

@thwe12

Mache nochmal :

iobroker stop
iobroker upload admin
iobroker start

[THWE12]

@homoran said in Nicht alle Instanzen werden angezeigt:

@thwe12 und was sagt iobroker update denn jetzt?

Alles auf dem neusten Stand nur halt Bluetooth Low Energy nicht

[THWE12]

@glasfaser said in Nicht alle Instanzen werden angezeigt:

@thwe12

Mache nochmal :

iobroker stop
iobroker upload admin
iobroker start

Nö leider keine änderung

[Glasfaser]

@thwe12
Ausgabe von :

 iobroker list adapters

iobroker Version

[THWE12]

@glasfaser said in Nicht alle Instanzen werden angezeigt:

@thwe12
Ausgabe von :

 iobroker list adapters

iobroker Version

pi@raspberrypi:~ $ iobroker list adapters
system.adapter.admin                   : admin          - v4.2.1
system.adapter.alexa2                  : alexa2         - v3.7.1
system.adapter.backitup                : backitup       - v1.7.0
system.adapter.ble                     : ble            - v0.11.3
system.adapter.coronavirus-statistics  : coronavirus-statistics - v0.6.3
system.adapter.deconz                  : deconz         - v1.3.11
system.adapter.discovery               : discovery      - v2.5.0
system.adapter.email                   : email          - v1.0.7
system.adapter.feiertage               : feiertage      - v1.0.17
system.adapter.flot                    : flot           - v1.10.6
system.adapter.hue                     : hue            - v3.3.8
system.adapter.ical                    : ical           - v1.7.4
system.adapter.info                    : info           - v1.7.14
system.adapter.iot                     : iot            - v1.8.9
system.adapter.javascript              : javascript     - v4.8.4
system.adapter.netatmo                 : netatmo        - v1.3.3
system.adapter.octoprint               : octoprint      - v1.0.3
system.adapter.radar2                  : radar2         - v1.0.9
system.adapter.rickshaw                : rickshaw       - v1.0.0
system.adapter.rpi2                    : rpi2           - v1.2.0
system.adapter.s7                      : s7             - v1.1.9
system.adapter.sql                     : sql            - v1.15.3
system.adapter.tahoma                  : tahoma         - v0.3.3
system.adapter.telegram                : telegram       - v1.7.0
system.adapter.tr-064                  : tr-064         - v4.2.2
system.adapter.trashschedule           : trashschedule  - v1.0.3
system.adapter.virtualpowermeter       : virtualpowermeter - v1.2.2
system.adapter.vis                     : vis            - v1.3.4
system.adapter.vis-fancyswitch         : vis-fancyswitch - v1.1.0
system.adapter.vis-hqwidgets           : vis-hqwidgets  - v1.1.7
system.adapter.vis-plumb               : vis-plumb      - v1.0.2
system.adapter.weatherunderground      : weatherunderground - v3.2.1
system.adapter.web                     : web            - v3.2.3
system.adapter.whatsapp-cmb            : whatsapp-cmb   - v0.1.6
system.adapter.wled                    : wled           - v0.5.6

pi@raspberrypi:~ $ iobroker Version
Commands:
iobroker setup [--objects <host>] [--states <host>] [custom]
iobroker start - starts the js-controller
iobroker stop - stops the js-controller
iobroker start <adapter>[.instance] - starts a specified adapter instance
iobroker stop <adapter>.[instance] - stops a specified adapter instance
iobroker start all - starts js-controller and all adapters
iobroker restart - restarts the js-controller
iobroker restart <adapter>[.instance] - restarts a specified adapter
iobroker debug <adapter> [--ip=<ip>] [--port=<port>] [--wait] - Starts a Node.js debugging session for the adapter
    --wait stops the execution until the debugger is attached.
    --ip and --port can be used to change the listen IP and port. Use IP 0.0.0.0 for remote debugging.
iobroker info - shows the host info
iobroker logs [adapter] [--watch] [--lines=1000]
iobroker add <adapter> [desiredNumber] [--enabled] [--host <host>] [--port <port>]
iobroker install <adapter> - installs a specified adapter
iobroker rebuild <adapter>|self [--install]
iobroker url <url> [<name>] - install adapter from specified url, e.g. GitHub
iobroker del <adapter> - remove adapter from system
iobroker del <adapter>.<instance> - remove adapter instance
iobroker update [repository url] [--updatable/--u] [--installed/--i] [--force/--f] - update repository and optionally filter installed/updateable adapters, use --force to bypass hash check
iobroker upgrade [repository url]
iobroker upgrade self [repository url] - upgrade js-controller and all adapters, optionally you can specify the repository url
iobroker upgrade <adapter> [repository url] - upgrade specified adapter, optionally you can specify the repository url
iobroker upload <pathToLocalFile> <pathIniobroker>
iobroker upload all - upload all adapter files to make them available for instances
iobroker upload <adapter> - upload specified adapter files to make them available for instances
iobroker object get <id> - get object specified by id
iobroker object set <id> <json-value> - set object with the given id by providing a new json object
iobroker object set <id> propertyname=<value or json-value> - update part of the object by providing a new value or partial object
iobroker object extend <id> <json-value> - extend object with the given id by providing a new json object
iobroker object del <id|pattern> [--yes]
iobroker object chmod <object-mode> [state-mode] <id>
iobroker object chown <user> <group> <id>
iobroker object list <id>
iobroker state get <id> - get state, specified by id
iobroker state getplain <id> [--pretty]
iobroker state getvalue <id>
iobroker state set <id> <value> [ack]
iobroker state del <id>
iobroker message <adapter>[.instance] <command> [<message>]
iobroker list <type> [filter]
iobroker chmod <mode> <file>
iobroker chown <user> <group> <file>
iobroker touch <file>
iobroker rm <file>
iobroker file read <iobroker-path-to-read> [<filesystem-path-to-write>]
iobroker file write <filesystem-path-to-read> <iobroker-path-to-write>
iobroker file rm <iobroker-path-to-delete>
iobroker file sync
iobroker user add <user> [--ingroup group] [--password pass]
iobroker user del <user>
iobroker user passwd <user> [--password pass]
iobroker user enable <user>
iobroker user disable <user>
iobroker user get <user>
iobroker user check <user> [--password pass]
iobroker group add <group>
iobroker group del <group>
iobroker group list <group>
iobroker group enable <group>
iobroker group disable <group>
iobroker group get <group>
iobroker group adduser <group> <user>
iobroker group deluser <group> <user>
iobroker host this
iobroker host <hostname>
iobroker host set <hostname>
iobroker host remove <hostname>
iobroker set <adapter>.<instance> [--port port] [--ip address] [--ssl true|false]
iobroker license <license.file or license.text>
iobroker cert create
iobroker cert view [<certificate name>]
iobroker clean
iobroker backup
iobroker restore <backup name or path> - restore a specified backup
iobroker validate <backup name or path> - validate a specified backup
iobroker <command> --timeout 5000
iobroker status [all|<adapter>.<instance>]
iobroker repo [name]
iobroker repo add <name> <path or url>
iobroker repo set <name>
iobroker repo del <name>
iobroker uuid
iobroker unsetup
iobroker fix - execute the installation fixer script, this updates your ioBroker installation
iobroker multihost <enable|disable> [--secure true|false]
iobroker multihost browse
iobroker multihost connect
iobroker compact status - show if compact mode is enabled in general
iobroker compact <enable|on|disable|off> - enable or disable compact mode in general
iobroker compact <adapter>.<instance> status - show if compact mode is enabled for a specific instance
iobroker compact <adapter>.<instance> group <group-id> - define compact group of a specific adapter
iobroker compact <adapter>.<instance> <disable|off> - enable or disable compact mode for specified adapter instance
iobroker compact <adapter>.<instance> <enable|on> [group-id] - enable or disable compact mode for specified adapter instance and set comapct group optionally
iobroker plugin enable <pluginname> [--host <hostname>] - enables a plugin for the specified host. If no host is specified, the current one is used
iobroker plugin disable <pluginname> [--host <hostname>] - disables a plugin for the specified host. If no host is specified, the current one is used
iobroker plugin status <pluginname> [--host <hostname>] - checks if a plugin is enabled for the specified host. If no host is specified, the current one is used
iobroker plugin enable <pluginname> --instance <adapter>[.<nr>] - enables a plugin for the specified adapter instance (defaults to instance 0)
iobroker plugin disable <pluginname> --instance <adapter>[.<nr>] - disables a plugin for the specified adapter instance (defaults to instance 0)
iobroker plugin status <pluginname> --instance <adapter>[.<nr>] - checks if a plugin is enabled for the specified adapter instance (defaults to instance 0)
iobroker version [adapter] - show version of js-controller or specified adapter
iobroker [adapter] -v - show version of js-controller or specified adapter

[Homoran]

@thwe12 sagte in Nicht alle Instanzen werden angezeigt:

Alles auf dem neusten Stand nur halt Bluetooth Low Energy nicht

ZEIGEN!

[THWE12]

@homoran said in Nicht alle Instanzen werden angezeigt:

@thwe12 sagte in Nicht alle Instanzen werden angezeigt:

Alles auf dem neusten Stand nur halt Bluetooth Low Energy nicht

ZEIGEN!

Adapter    "admin"         : 4.2.1    , installed 4.2.1
Adapter    "alarm"         : 1.9.0
Adapter    "alexa2"        : 3.7.1    , installed 3.7.1
Adapter    "alpha2"        : 1.0.0
Adapter    "amazon-dash"   : 1.1.0
Adapter    "artnet"        : 1.2.2
Adapter    "asterisk"      : 1.0.6
Adapter    "asuswrt"       : 1.0.1
Adapter    "b-control-em"  : 0.2.1
Adapter    "backitup"      : 1.7.0    , installed 1.7.0
Adapter    "beckhoff"      : 1.2.2
Adapter    "benq"          : 0.2.0
Adapter    "binance"       : 1.1.3
Adapter    "ble"           : 0.12.0   , installed 0.11.3 [Updateable]
Adapter    "bmw"           : 1.3.3
Adapter    "bosesoundtouch": 0.9.3
Adapter    "botvac"        : 1.0.0
Adapter    "bring"         : 1.7.7
Adapter    "broadlink2"    : 2.0.3
Adapter    "bsblan"        : 0.2.0
Adapter    "bshb"          : 0.1.13
Adapter    "chromecast"    : 2.3.1
Adapter    "cloud"         : 4.0.4
Adapter    "comfoair"      : 0.3.2
Adapter    "contactid"     : 1.0.1
Adapter    "coronavirus-statistics": 0.6.3   , installed 0.6.3
Adapter    "countdown"     : 1.1.0
Adapter    "cul"           : 1.3.4
Adapter    "daikin"        : 1.2.0
Adapter    "daswetter"     : 3.0.4
Adapter    "deconz"        : 1.3.11   , installed 1.3.11
Adapter    "denon"         : 1.9.1
Adapter    "device-reminder": 1.0.6
Adapter    "devices"       : 0.3.15
Adapter    "digitalstrom"  : 2.0.5
Adapter    "discovergy"    : 0.5.0
Adapter    "discovery"     : 2.5.0    , installed 2.5.0
Adapter    "doorio"        : 1.1.2
Adapter    "ds18b20"       : 1.2.1
Adapter    "dwd"           : 2.5.2
Adapter    "ebus"          : 2.2.3
Adapter    "echarts"       : 0.4.9
Adapter    "ecovacs-deebot": 1.0.3
Adapter    "egigeozone"    : 0.1.2
Adapter    "ekey"          : 1.1.0
Adapter    "email"         : 1.0.7    , installed 1.0.7
Adapter    "emby"          : 1.0.2
Adapter    "energymanager" : 1.2.3
Adapter    "enet"          : 1.0.1
Adapter    "epson_stylus_px830": 0.2.1
Adapter    "exchangerates" : 0.0.13
Adapter    "fahrplan"      : 1.0.2
Adapter    "fakeroku"      : 0.2.1
Adapter    "fb-checkpresence": 1.1.0
Adapter    "feiertage"     : 1.0.17   , installed 1.0.17
Adapter    "fhem"          : 1.5.3
Adapter    "find-my-iphone": 0.2.15
Adapter    "firetv"        : 1.0.0
Adapter    "flot"          : 1.10.6   , installed 1.10.6
Adapter    "followthesun"  : 0.2.6
Adapter    "foobar2000"    : 2.0.3
Adapter    "fritzbox"      : 0.2.1
Adapter    "fritzdect"     : 0.2.4
Adapter    "fronius"       : 1.0.5
Adapter    "frontier_silicon": 0.0.10
Adapter    "fullcalendar"  : 1.1.0
Adapter    "fullybrowser"  : 2.0.1
Adapter    "g-homa"        : 0.5.3
Adapter    "geofency"      : 0.3.2
Adapter    "go-e"          : 1.0.0
Adapter    "growatt"       : 0.0.15
Adapter    "gruenbeck"     : 0.0.28
Adapter    "habpanel"      : 0.4.3
Adapter    "haier"         : 1.0.2
Adapter    "ham"           : 3.0.2
Adapter    "ham-wemo"      : 1.1.0
Adapter    "harmony"       : 1.2.2
Adapter    "heatingcontrol": 1.1.2
Adapter    "heos"          : 1.6.2
Adapter    "heytech"       : 1.0.0
Adapter    "hid"           : 0.1.17
Adapter    "history"       : 1.9.12
Adapter    "hm-rega"       : 3.0.6
Adapter    "hm-rpc"        : 1.14.24
Adapter    "hmip"          : 1.6.0
Adapter    "homeconnect"   : 0.0.31
Adapter    "homee"         : 1.1.0
Adapter    "homepilot"     : 1.0.3
Adapter    "hp-ilo"        : 1.0.6
Adapter    "hs100"         : 2.0.1
Adapter    "hue"           : 3.3.8    , installed 3.3.8
Adapter    "hue-extended"  : 2.0.0
Adapter    "i2c"           : 1.1.1
Adapter    "ical"          : 1.7.4    , installed 1.7.4
Adapter    "icons-addictive-flavour-png": 0.1.0
Adapter    "icons-fatcow-hosting": 0.1.0
Adapter    "icons-icons8"  : 0.0.1
Adapter    "icons-material-png": 0.1.0
Adapter    "icons-material-svg": 0.1.0
Adapter    "icons-mfd-png" : 1.0.2
Adapter    "icons-mfd-svg" : 1.0.2
Adapter    "icons-open-icon-library-png": 0.1.2
Adapter    "icons-ultimate-png": 1.0.1
Adapter    "influxdb"      : 1.9.4
Adapter    "info"          : 1.7.14   , installed 1.7.14
Adapter    "innogy-smarthome": 0.3.6
Adapter    "iogo"          : 0.6.5
Adapter    "iot"           : 1.8.9    , installed 1.8.9
Adapter    "iqontrol"      : 1.5.0    , installed 1.5.4
Adapter    "jarvis"        : 2.0.0
Adapter    "javascript"    : 4.8.4    , installed 4.8.4
Adapter    "jeelink"       : 0.1.0
Controller "js-controller" : 3.1.6    , installed 3.1.6
Adapter    "kecontact"     : 1.0.1
Adapter    "klf200"        : 1.0.1
Adapter    "km200"         : 1.1.6
Adapter    "knmi-weather"  : 1.0.0
Adapter    "knx"           : 1.0.39
Adapter    "kodi"          : 2.0.4
Adapter    "kostal-piko-ba": 1.1.5
Adapter    "kress"         : 2.5.5
Adapter    "lametric"      : 1.0.0
Adapter    "landroid"      : 1.0.3
Adapter    "lcn"           : 1.0.2
Adapter    "legrand-ecocompteur": 1.0.0
Adapter    "letrika_comgw" : 0.0.5
Adapter    "lgtv"          : 1.1.10
Adapter    "lgtv-rs"       : 0.1.0
Adapter    "lgtv11"        : 1.0.5
Adapter    "lifx"          : 0.1.0
Adapter    "lightify"      : 0.2.16
Adapter    "link"          : 0.5.10
Adapter    "linkeddevices" : 1.4.2
Adapter    "linux-control" : 1.1.2
Adapter    "logparser"     : 1.1.0
Adapter    "lovelace"      : 1.0.16
Adapter    "loxone"        : 2.1.0
Adapter    "luftdaten"     : 1.0.1
Adapter    "lupusec"       : 1.2.9
Adapter    "luxtronik1"    : 0.2.2
Adapter    "material"      : 0.13.9
Adapter    "maxcube"       : 1.0.2
Adapter    "maxcul"        : 1.3.1
Adapter    "mbus"          : 2.3.1
Adapter    "mclighting"    : 0.1.1
Adapter    "megad"         : 1.2.1
Adapter    "megadd"        : 0.2.0
Adapter    "megaesp"       : 0.1.0
Adapter    "melcloud"      : 1.0.6
Adapter    "mercedesme"    : 0.0.43
Adapter    "mercury"       : 0.1.1
Adapter    "meross"        : 1.5.1
Adapter    "meteoalarm"    : 1.0.9
Adapter    "midea"         : 0.0.6
Adapter    "miele"         : 0.1.5
Adapter    "mielecloudservice": 2.0.0
Adapter    "mihome"        : 1.3.6
Adapter    "mihome-lamp"   : 1.1.0
Adapter    "mihome-plug"   : 0.2.1
Adapter    "mihome-vacuum" : 2.1.1
Adapter    "mikrotik"      : 1.0.11
Adapter    "milight"       : 0.3.6
Adapter    "milight-smart-light": 1.2.0
Adapter    "minuvis"       : 1.0.0
Adapter    "mobile"        : 1.0.1
Adapter    "modbus"        : 3.1.10
Adapter    "moma"          : 1.2.7
Adapter    "mpd"           : 1.0.5
Adapter    "mqtt"          : 2.1.14
Adapter    "mqtt-client"   : 1.3.1
Adapter    "musiccast"     : 0.1.5
Adapter    "mydlink"       : 1.1.7
Adapter    "mysensors"     : 2.0.1
Adapter    "nanoleaf-lightpanels": 1.0.6
Adapter    "netatmo"       : 1.3.3    , installed 1.3.3
Adapter    "netatmo-crawler": 0.3.9
Adapter    "nibeuplink"    : 0.4.0
Adapter    "nina"          : 0.0.23
Adapter    "node-red"      : 2.0.3
Adapter    "nuki"          : 1.4.2
Adapter    "nuki-extended" : 2.3.0
Adapter    "nut"           : 1.3.0
Adapter    "octoprint"     : 1.0.3    , installed 1.0.3
Adapter    "odl"           : 1.1.4
Adapter    "oilfox"        : 0.0.5
Adapter    "onkyo"         : 2.0.3
Adapter    "onvif"         : 0.4.4
Adapter    "openhab"       : 1.1.0
Adapter    "openligadb"    : 1.1.0
Adapter    "openweathermap": 0.1.0
Adapter    "opi"           : 0.1.1
Adapter    "oppoplayer"    : 0.2.1
Adapter    "owfs"          : 0.6.4
Adapter    "owntracks"     : 1.0.0
Adapter    "panasonic-viera": 1.0.2
Adapter    "parser"        : 1.0.7
Adapter    "paw"           : 0.0.7
Adapter    "phantomjs"     : 1.1.2
Adapter    "pi-hole"       : 1.3.1
Adapter    "piface"        : 1.0.0
Adapter    "pimatic"       : 0.3.0
Adapter    "ping"          : 1.4.12
Adapter    "places"        : 1.0.0
Adapter    "plenticore"    : 2.1.6
Adapter    "plex"          : 0.8.11
Adapter    "plexconnect"   : 0.0.7
Adapter    "pollenflug"    : 1.0.6
Adapter    "proxmox"       : 1.0.1
Adapter    "proxy"         : 1.2.1
Adapter    "pushbullet"    : 0.0.11
Adapter    "pushover"      : 2.0.3
Adapter    "pushsafer"     : 1.0.3
Adapter    "radar2"        : 1.0.9
Adapter    "radiohead"     : 1.1.1
Adapter    "rflink"        : 2.1.6
Adapter    "rickshaw"      : 1.0.0    , installed 1.0.0
Adapter    "ring"          : 1.1.3
Adapter    "robonect"      : 0.1.3
Adapter    "roomba"        : 1.1.1
Adapter    "rpi2"          : 1.2.0    , installed 1.2.0
Adapter    "s7"            : 1.1.9    , installed 1.1.9
Adapter    "samsung"       : 0.2.9
Adapter    "sayit"         : 1.12.2
Adapter    "sbfspot"       : 4.0.2
Adapter    "scenes"        : 2.3.3
Adapter    "schoolfree"    : 0.7.0
Adapter    "schwoerer-ventcube": 1.3.0
Adapter    "seq"           : 0.2.9
Adapter    "shelly"        : 4.0.4
Adapter    "shuttercontrol": 1.0.4
Adapter    "sia"           : 1.0.4
Adapter    "siegenia"      : 1.0.1
Adapter    "simple-api"    : 2.5.2    , installed 2.5.3
Adapter    "smappee"       : 0.2.2
Adapter    "smartcontrol"  : 1.2.1
Adapter    "smartgarden"   : 1.0.1
Adapter    "smartmeter"    : 3.1.6
Adapter    "snips"         : 1.5.1
Adapter    "snmp"          : 0.5.0
Adapter    "socketio"      : 3.1.4    , installed 3.1.4
Adapter    "solarlog"      : 2.0.1
Adapter    "solarviewdatareader": 0.2.1
Adapter    "solarwetter"   : 1.0.0
Adapter    "sonnen"        : 1.7.0
Adapter    "sonoff"        : 2.3.3
Adapter    "sonos"         : 2.1.1
Adapter    "sony-bravia"   : 1.0.1
Adapter    "spotify-premium": 1.0.0
Adapter    "sql"           : 1.15.3   , installed 1.15.3
Adapter    "squeezebox"    : 1.0.0
Adapter    "squeezeboxrpc" : 1.0.0
Adapter    "starline"      : 1.0.0
Adapter    "statistics"    : 1.0.2
Adapter    "stiebel-isg"   : 1.6.0
Adapter    "sunnyportal"   : 0.1.5
Adapter    "swiss-weather-api": 0.3.2
Adapter    "synology"      : 0.1.18
Adapter    "systeminfo"    : 0.3.1
Adapter    "tahoma"        : 0.3.2    , installed 0.3.3
Adapter    "tankerkoenig"  : 2.0.5
Adapter    "telegram"      : 1.7.0
Adapter    "terminal"      : 0.1.2
Adapter    "tesla-motors"  : 0.2.3
Adapter    "text2command"  : 2.0.7
Adapter    "tinker"        : 1.1.0
Adapter    "tr-064"        : 4.2.2
Adapter    "tradfri"       : 2.6.5
Adapter    "trashschedule" : 1.0.3    , installed 1.0.3
Adapter    "tunnelbroker-endpoint-updater": 0.0.1
Adapter    "tuya"          : 3.5.2
Adapter    "tvspielfilm"   : 1.0.4
Adapter    "unifi"         : 0.5.8
Adapter    "upnp"          : 1.0.16
Adapter    "vaillant"      : 0.0.11
Adapter    "valloxmv"      : 1.1.1
Adapter    "vcard"         : 0.0.9
Adapter    "velux"         : 0.0.7
Adapter    "viessmann"     : 1.3.3
Adapter    "virtualpowermeter": 1.2.2   , installed 1.2.2
Adapter    "vis"           : 1.3.4    , installed 1.3.4
Adapter    "vis-bars"      : 0.1.4
Adapter    "vis-canvas-gauges": 0.1.5
Adapter    "vis-colorpicker": 1.2.0
Adapter    "vis-fancyswitch": 1.1.0   , installed 1.1.0
Adapter    "vis-google-fonts": 0.1.0
Adapter    "vis-history"   : 1.0.0
Adapter    "vis-hqwidgets" : 1.1.7    , installed 1.1.7
Adapter    "vis-icontwo"   : 0.40.0
Adapter    "vis-inventwo"  : 2.7.4
Adapter    "vis-jqui-mfd"  : 1.0.12
Adapter    "vis-justgage"  : 1.0.2
Adapter    "vis-keyboard"  : 0.0.2
Adapter    "vis-lcars"     : 1.0.4
Adapter    "vis-map"       : 1.0.4
Adapter    "vis-material-advanced": 1.3.0
Adapter    "vis-metro"     : 1.1.2
Adapter    "vis-players"   : 0.1.6
Adapter    "vis-plumb"     : 1.0.2    , installed 1.0.2
Adapter    "vis-rgraph"    : 0.0.2
Adapter    "vis-timeandweather": 1.1.7
Adapter    "vis-weather"   : 2.5.2
Adapter    "volvo"         : 0.0.3
Adapter    "vr200"         : 1.0.0
Adapter    "vw-connect"    : 0.0.26
Adapter    "weatherunderground": 3.2.1   , installed 3.2.1
Adapter    "web"           : 3.2.3    , installed 3.2.3
Adapter    "weishaupt-wem" : 0.0.8
Adapter    "whatsapp-cmb"  : 0.1.6    , installed 0.1.6
Adapter    "wiffi-wz"      : 2.2.0
Adapter    "wifilight"     : 1.1.0
Adapter    "windows-control": 0.1.5
Adapter    "wled"          : 0.5.6
Adapter    "wm-bus"        : 0.1.12
Adapter    "wolf"          : 1.2.1
Adapter    "worx"          : 1.2.3
Adapter    "xbox"          : 0.7.3
Adapter    "xs1"           : 1.0.2
Adapter    "yahka"         : 0.12.0
Adapter    "yamaha"        : 0.4.0
Adapter    "yeelight-2"    : 1.0.3
Adapter    "youtube"       : 1.0.0
Adapter    "yr"            : 2.0.3
Adapter    "zigbee"        : 1.3.1
Adapter    "zont"          : 0.5.3
Adapter    "zwave"         : 2.0.1
Adapter    "zwave2"        : 1.8.5

[Homoran]

@thwe12 da fehlen die ersten Zeilen - die hätte ich auch gerne

[THWE12]

@homoran sagte in Nicht alle Instanzen werden angezeigt:

@thwe12 da fehlen die ersten Zeilen - die hätte ich auch gerne

Sorry

pi@raspberrypi:~ $ iobroker update

Used repository: default
hash unchanged, use cached sources
update done

[Homoran]

@thwe12 ist das letzte (mit blauem Hintergrund) die vollständige Anzeige?

[Homoran]

@thwe12 Danke!

Die Versionen passen, du verwendest default; was mich allerdings etwas stutzig macht, weil es bei mir mit gleicher Konstellation so aussieht:

pi@raspberrypi:~ $ iobroker update
Used repository: Stable (default)
hash changed or no sources cached => force download of new sources

[THWE12]

@homoran sagte in Nicht alle Instanzen werden angezeigt:

@thwe12 Danke!

Die Versionen passen, du verwendest default; was mich allerdings etwas stutzig macht, weil es bei mir mit gleicher Konstellation so aussieht:

pi@raspberrypi:~ $ iobroker update
Used repository: Stable (default)
hash changed or no sources cached => force download of new sources

Ok und was sagt mir das??

[Homoran]

@thwe12 sagte in Nicht alle Instanzen werden angezeigt:

Ok und was sagt mir das??

Das ist die Frage!

Installiere noch einmal den admin drüber

ich denke iobroker i admin wird nicht klappen