(GELÖST) zigbee-herdsmann-converters / wie manuell updaten?
Entwicklung
129
Posts
13
Posters
27.3k
Views
12
Watching
-
bei der Ausgabe kommen keine Fehler!
Danke dir!Und das Gerät ist auch drin?
-
Und das Gerät ist auch drin?
-
-
Hallo Thomas,
hab das mal reinkopiert aber dann startet der zigbee adapter nicht mehr :-/
2022-11-15 21:15:17.734 - error: host.pi4b Caught by controller[0]: /opt/iobroker/node_modules/zigbee-herdsman-converters/devices/saswell.js:52 2022-11-15 21:15:17.734 - error: host.pi4b Caught by controller[0]: .withAwayMode()], 2022-11-15 21:15:17.735 - error: host.pi4b Caught by controller[0]: ^ 2022-11-15 21:15:17.735 - error: host.pi4b Caught by controller[0]: TypeError: exposes.climate(...).withSetpoint(...).withLocalTemperature(...).withSystemMode(...).withLocalTemperatureCalibration(...).withAwayMode is not a function 2022-11-15 21:15:17.735 - error: host.pi4b Caught by controller[0]: at Object. (/opt/iobroker/node_modules/zigbee-herdsman-converters/devices/saswell.js:52:18) 2022-11-15 21:15:17.735 - error: host.pi4b Caught by controller[0]: at Module._compile (node:internal/modules/cjs/loader:1155:14) 2022-11-15 21:15:17.735 - error: host.pi4b Caught by controller[0]: at Object.Module._extensions..js (node:internal/modules/cjs/loader:1209:10) 2022-11-15 21:15:17.735 - error: host.pi4b Caught by controller[0]: at Module.load (node:internal/modules/cjs/loader:1033:32) 2022-11-15 21:15:17.735 - error: host.pi4b Caught by controller[0]: at Function.Module._load (node:internal/modules/cjs/loader:868:12) 2022-11-15 21:15:17.735 - error: host.pi4b Caught by controller[0]: at Module.require (node:internal/modules/cjs/loader:1057:19) 2022-11-15 21:15:17.735 - error: host.pi4b Caught by controller[0]: at require (node:internal/modules/cjs/helpers:103:18) 2022-11-15 21:15:17.736 - error: host.pi4b Caught by controller[0]: at Object. (/opt/iobroker/node_modules/zigbee-herdsman-converters/index.js:118:30) 2022-11-15 21:15:17.736 - error: host.pi4b Caught by controller[0]: at Module._compile (node:internal/modules/cjs/loader:1155:14) 2022-11-15 21:15:17.736 - error: host.pi4b Caught by controller[0]: at Object.Module._extensions..js (node:internal/modules/cjs/loader:1209:10) 2022-11-15 21:15:17.736 - error: host.pi4b instance system.adapter.zigbee.0 terminated with code 1 (JS_CONTROLLER_STOPPED) -
Hallo Thomas,
hab das mal reinkopiert aber dann startet der zigbee adapter nicht mehr :-/
2022-11-15 21:15:17.734 - error: host.pi4b Caught by controller[0]: /opt/iobroker/node_modules/zigbee-herdsman-converters/devices/saswell.js:52 2022-11-15 21:15:17.734 - error: host.pi4b Caught by controller[0]: .withAwayMode()], 2022-11-15 21:15:17.735 - error: host.pi4b Caught by controller[0]: ^ 2022-11-15 21:15:17.735 - error: host.pi4b Caught by controller[0]: TypeError: exposes.climate(...).withSetpoint(...).withLocalTemperature(...).withSystemMode(...).withLocalTemperatureCalibration(...).withAwayMode is not a function 2022-11-15 21:15:17.735 - error: host.pi4b Caught by controller[0]: at Object. (/opt/iobroker/node_modules/zigbee-herdsman-converters/devices/saswell.js:52:18) 2022-11-15 21:15:17.735 - error: host.pi4b Caught by controller[0]: at Module._compile (node:internal/modules/cjs/loader:1155:14) 2022-11-15 21:15:17.735 - error: host.pi4b Caught by controller[0]: at Object.Module._extensions..js (node:internal/modules/cjs/loader:1209:10) 2022-11-15 21:15:17.735 - error: host.pi4b Caught by controller[0]: at Module.load (node:internal/modules/cjs/loader:1033:32) 2022-11-15 21:15:17.735 - error: host.pi4b Caught by controller[0]: at Function.Module._load (node:internal/modules/cjs/loader:868:12) 2022-11-15 21:15:17.735 - error: host.pi4b Caught by controller[0]: at Module.require (node:internal/modules/cjs/loader:1057:19) 2022-11-15 21:15:17.735 - error: host.pi4b Caught by controller[0]: at require (node:internal/modules/cjs/helpers:103:18) 2022-11-15 21:15:17.736 - error: host.pi4b Caught by controller[0]: at Object. (/opt/iobroker/node_modules/zigbee-herdsman-converters/index.js:118:30) 2022-11-15 21:15:17.736 - error: host.pi4b Caught by controller[0]: at Module._compile (node:internal/modules/cjs/loader:1155:14) 2022-11-15 21:15:17.736 - error: host.pi4b Caught by controller[0]: at Object.Module._extensions..js (node:internal/modules/cjs/loader:1209:10) 2022-11-15 21:15:17.736 - error: host.pi4b instance system.adapter.zigbee.0 terminated with code 1 (JS_CONTROLLER_STOPPED)@diamand2k22 sagte in (GELÖST) zigbee-herdsmann-converters / wie manuell updaten?:
hab das mal reinkopiert
Was wo reinkopiert?
-
@diamand2k22 sagte in (GELÖST) zigbee-herdsmann-converters / wie manuell updaten?:
hab das mal reinkopiert
Was wo reinkopiert?
@david-jung said in Hama Smartes Heizkörper-Thermostat:
@david-jung
so, ich habe folgendes gemacht:die Datei: /opt/iobroker/node_modules/zigbee-herdsman-converters/devices/saswell.js
etwas erweitert, jetzt kann ich die Ist-Temperatur ablesen, so wie die Soll-Temperatur setzen/lesen.
Den Modus (heizen/auto/aus) lesen, setzen.
Ventil Status ablesen.
Und Offset für Temperatur setzen/lesen./opt/iobroker/node_modules/zigbee-herdsman-converters/devices/saswell.js
const exposes = require('../lib/exposes'); const fz = {...require('../converters/fromZigbee'), legacy: require('../lib/legacy').fromZigbee}; const tz = require('../converters/toZigbee'); const tuya = require('../lib/tuya'); const reporting = require('../lib/reporting'); const e = exposes.presets; const ea = exposes.access; module.exports = [ { fingerprint: [{modelID: 'GbxAXL2\u0000', manufacturerName: '_TYST11_KGbxAXL2'}, {modelID: 'uhszj9s\u0000', manufacturerName: '_TYST11_zuhszj9s'}, {modelID: '88teujp\u0000', manufacturerName: '_TYST11_c88teujp'}, {modelID: 'w7cahqs\u0000', manufacturerName: '_TYST11_yw7cahqs'}, {modelID: 'w7cahqs', manufacturerName: '_TYST11_yw7cahqs'}, {modelID: 'TS0601', manufacturerName: '_TZE200_c88teujp'}, {modelID: 'TS0601', manufacturerName: '_TZE200_yw7cahqs'}, {modelID: 'TS0601', manufacturerName: '_TZE200_azqp6ssj'}, {modelID: 'TS0601', manufacturerName: '_TZE200_bvu2wnxz'}, {modelID: 'TS0601', manufacturerName: '_TZE200_zuhszj9s'}, {modelID: 'TS0601', manufacturerName: '_TZE200_9gvruqf5'}, {modelID: 'TS0601', manufacturerName: '_TZE200_zr9c0day'}, ], model: 'SEA801-Zigbee/SEA802-Zigbee', vendor: 'Saswell', description: 'Thermostatic radiator valve', whiteLabel: [{vendor: 'HiHome', model: 'WZB-TRVL'}, {vendor: 'Hama', model: '00176592'}, {vendor: 'RTX', model: 'ZB-RT1'}], fromZigbee: [fz.saswell_thermostat, fz.ignore_tuya_set_time, fz.ignore_basic_report, fz.legacy.tuya_thermostat_weekly_schedule], toZigbee: [tz.saswell_thermostat_current_heating_setpoint, tz.saswell_thermostat_mode, tz.saswell_thermostat_away, tz.saswell_thermostat_child_lock, tz.saswell_thermostat_window_detection, tz.saswell_thermostat_frost_detection, tz.saswell_thermostat_calibration, tz.saswell_thermostat_anti_scaling, tz.tuya_thermostat_weekly_schedule], onEvent: tuya.onEventSetTime, meta: { thermostat: { weeklyScheduleMaxTransitions: 4, weeklyScheduleSupportedModes: [1], // bits: 0-heat present, 1-cool present (dec: 1-heat,2-cool,3-heat+cool) weeklyScheduleConversion: 'saswell', }, }, configure: async (device, coordinatorEndpoint, logger) => { const endpoint = device.getEndpoint(1); await reporting.bind(endpoint, coordinatorEndpoint, ['genBasic']); }, exposes: [e.battery_low(), e.window_detection(), e.child_lock(), exposes.binary('heating', ea.STATE, 'ON', 'OFF').withDescription('Device valve is open or closed (heating or not)'), exposes.climate() .withSetpoint('current_heating_setpoint', 5, 30, 0.5, ea.STATE_SET).withLocalTemperature(ea.STATE) .withSystemMode(['off', 'heat', 'auto'], ea.STATE_SET) // Range is -6 - 6 and step 1: https://github.com/Koenkk/zigbee2mqtt/issues/11777 .withLocalTemperatureCalibration(-6, 6, 1, ea.STATE_SET) .withAwayMode()], }, { /*added by djung 10.11.2022*/ fingerprint: [{modelID: 'TS0601', manufacturerName: '_TZE200_h4cgnbzg'}], model: 'HZ', vendor: 'HAMA', description: 'Thermostatic radiator valve', whiteLabel: [{vendor: 'Hama', model: 'XXXxxxXXX'},], fromZigbee: [fz.saswell_thermostat], toZigbee: [tz.saswell_thermostat_current_heating_setpoint, tz.saswell_thermostat_mode, tz.saswell_thermostat_calibration], onEvent: tuya.onEventSetTime, configure: async (device, coordinatorEndpoint, logger) => { const endpoint = device.getEndpoint(1); await reporting.bind(endpoint, coordinatorEndpoint, ['genBasic']); }, exposes: [ e.battery_low(), /*e.switch(),*/ /*e.lock(),*/ exposes.binary('heating', ea.STATE, 'ON', 'OFF').withDescription('Device valve is open or closed (heating or not)'), exposes.climate() .withSetpoint('current_heating_setpoint', 5, 30, 0.5, ea.STATE_SET).withLocalTemperature(ea.STATE) .withSystemMode(['off', 'heat', 'auto'], ea.STATE_SET) // Range is -6 - 6 and step 1: https://github.com/Koenkk/zigbee2mqtt/issues/11777 .withLocalTemperatureCalibration(-6, 6, 1, ea.STATE_SET) ], }, ];soll man das irgendwo auf github oder so noch posten? Wenn ja, bitte zeigen wo =)
Grüße.
David. -
@david-jung said in Hama Smartes Heizkörper-Thermostat:
@david-jung
so, ich habe folgendes gemacht:die Datei: /opt/iobroker/node_modules/zigbee-herdsman-converters/devices/saswell.js
etwas erweitert, jetzt kann ich die Ist-Temperatur ablesen, so wie die Soll-Temperatur setzen/lesen.
Den Modus (heizen/auto/aus) lesen, setzen.
Ventil Status ablesen.
Und Offset für Temperatur setzen/lesen./opt/iobroker/node_modules/zigbee-herdsman-converters/devices/saswell.js
const exposes = require('../lib/exposes'); const fz = {...require('../converters/fromZigbee'), legacy: require('../lib/legacy').fromZigbee}; const tz = require('../converters/toZigbee'); const tuya = require('../lib/tuya'); const reporting = require('../lib/reporting'); const e = exposes.presets; const ea = exposes.access; module.exports = [ { fingerprint: [{modelID: 'GbxAXL2\u0000', manufacturerName: '_TYST11_KGbxAXL2'}, {modelID: 'uhszj9s\u0000', manufacturerName: '_TYST11_zuhszj9s'}, {modelID: '88teujp\u0000', manufacturerName: '_TYST11_c88teujp'}, {modelID: 'w7cahqs\u0000', manufacturerName: '_TYST11_yw7cahqs'}, {modelID: 'w7cahqs', manufacturerName: '_TYST11_yw7cahqs'}, {modelID: 'TS0601', manufacturerName: '_TZE200_c88teujp'}, {modelID: 'TS0601', manufacturerName: '_TZE200_yw7cahqs'}, {modelID: 'TS0601', manufacturerName: '_TZE200_azqp6ssj'}, {modelID: 'TS0601', manufacturerName: '_TZE200_bvu2wnxz'}, {modelID: 'TS0601', manufacturerName: '_TZE200_zuhszj9s'}, {modelID: 'TS0601', manufacturerName: '_TZE200_9gvruqf5'}, {modelID: 'TS0601', manufacturerName: '_TZE200_zr9c0day'}, ], model: 'SEA801-Zigbee/SEA802-Zigbee', vendor: 'Saswell', description: 'Thermostatic radiator valve', whiteLabel: [{vendor: 'HiHome', model: 'WZB-TRVL'}, {vendor: 'Hama', model: '00176592'}, {vendor: 'RTX', model: 'ZB-RT1'}], fromZigbee: [fz.saswell_thermostat, fz.ignore_tuya_set_time, fz.ignore_basic_report, fz.legacy.tuya_thermostat_weekly_schedule], toZigbee: [tz.saswell_thermostat_current_heating_setpoint, tz.saswell_thermostat_mode, tz.saswell_thermostat_away, tz.saswell_thermostat_child_lock, tz.saswell_thermostat_window_detection, tz.saswell_thermostat_frost_detection, tz.saswell_thermostat_calibration, tz.saswell_thermostat_anti_scaling, tz.tuya_thermostat_weekly_schedule], onEvent: tuya.onEventSetTime, meta: { thermostat: { weeklyScheduleMaxTransitions: 4, weeklyScheduleSupportedModes: [1], // bits: 0-heat present, 1-cool present (dec: 1-heat,2-cool,3-heat+cool) weeklyScheduleConversion: 'saswell', }, }, configure: async (device, coordinatorEndpoint, logger) => { const endpoint = device.getEndpoint(1); await reporting.bind(endpoint, coordinatorEndpoint, ['genBasic']); }, exposes: [e.battery_low(), e.window_detection(), e.child_lock(), exposes.binary('heating', ea.STATE, 'ON', 'OFF').withDescription('Device valve is open or closed (heating or not)'), exposes.climate() .withSetpoint('current_heating_setpoint', 5, 30, 0.5, ea.STATE_SET).withLocalTemperature(ea.STATE) .withSystemMode(['off', 'heat', 'auto'], ea.STATE_SET) // Range is -6 - 6 and step 1: https://github.com/Koenkk/zigbee2mqtt/issues/11777 .withLocalTemperatureCalibration(-6, 6, 1, ea.STATE_SET) .withAwayMode()], }, { /*added by djung 10.11.2022*/ fingerprint: [{modelID: 'TS0601', manufacturerName: '_TZE200_h4cgnbzg'}], model: 'HZ', vendor: 'HAMA', description: 'Thermostatic radiator valve', whiteLabel: [{vendor: 'Hama', model: 'XXXxxxXXX'},], fromZigbee: [fz.saswell_thermostat], toZigbee: [tz.saswell_thermostat_current_heating_setpoint, tz.saswell_thermostat_mode, tz.saswell_thermostat_calibration], onEvent: tuya.onEventSetTime, configure: async (device, coordinatorEndpoint, logger) => { const endpoint = device.getEndpoint(1); await reporting.bind(endpoint, coordinatorEndpoint, ['genBasic']); }, exposes: [ e.battery_low(), /*e.switch(),*/ /*e.lock(),*/ exposes.binary('heating', ea.STATE, 'ON', 'OFF').withDescription('Device valve is open or closed (heating or not)'), exposes.climate() .withSetpoint('current_heating_setpoint', 5, 30, 0.5, ea.STATE_SET).withLocalTemperature(ea.STATE) .withSystemMode(['off', 'heat', 'auto'], ea.STATE_SET) // Range is -6 - 6 and step 1: https://github.com/Koenkk/zigbee2mqtt/issues/11777 .withLocalTemperatureCalibration(-6, 6, 1, ea.STATE_SET) ], }, ];soll man das irgendwo auf github oder so noch posten? Wenn ja, bitte zeigen wo =)
Grüße.
David.Alles? Das war nur als Denkansatz für dich gedacht.
Ich hätte da erstmal nur die Manufacturer-ID hinzugefügt. Sind ja schon ein paar Varianten von dem Thermostat mit der Modellbezeichnung TS0601 vorhanden. -
Alles? Das war nur als Denkansatz für dich gedacht.
Ich hätte da erstmal nur die Manufacturer-ID hinzugefügt. Sind ja schon ein paar Varianten von dem Thermostat mit der Modellbezeichnung TS0601 vorhanden.hab die manufactor id eingefügt, jetzt erkennt er das thermostat, liefert aber keine werte!
2022-11-15 21:35:02.182 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #2 with data {"dp":2,"datatype":4,"data":{"type":"Buffer","data":[2]}} 2022-11-15 21:35:02.434 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #4 with data {"dp":4,"datatype":2,"data":{"type":"Buffer","data":[0,0,0,50]}} 2022-11-15 21:35:02.551 - info: dwd.0 (92835) starting. Version 2.8.3 in /opt/iobroker/node_modules/iobroker.dwd, node: v16.18.1, js-controller: 4.0.23 2022-11-15 21:35:02.555 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #5 with data {"dp":5,"datatype":2,"data":{"type":"Buffer","data":[0,0,0,200]}} 2022-11-15 21:35:02.704 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #7 with data {"dp":7,"datatype":1,"data":{"type":"Buffer","data":[0]}} 2022-11-15 21:35:02.789 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #28 with data {"dp":28,"datatype":0,"data":{"type":"Buffer","data":[1,6,0,0,120,8,0,0,160,18,0,0,220,20,0,0,200]}} 2022-11-15 21:35:02.906 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #29 with data {"dp":29,"datatype":0,"data":{"type":"Buffer","data":[2,6,0,0,120,8,0,0,160,18,0,0,220,20,0,0,200]}} 2022-11-15 21:35:03.032 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #30 with data {"dp":30,"datatype":0,"data":{"type":"Buffer","data":[3,6,0,0,120,8,0,0,160,18,0,0,220,20,0,0,200]}} 2022-11-15 21:35:03.144 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #31 with data {"dp":31,"datatype":0,"data":{"type":"Buffer","data":[4,6,0,0,120,8,0,0,160,18,0,0,220,20,0,0,200]}} 2022-11-15 21:35:03.264 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #32 with data {"dp":32,"datatype":0,"data":{"type":"Buffer","data":[5,6,0,0,120,8,0,0,160,18,0,0,220,20,0,0,200]}} 2022-11-15 21:35:03.380 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #33 with data {"dp":33,"datatype":0,"data":{"type":"Buffer","data":[6,6,0,0,120,8,0,0,160,18,0,0,220,20,0,0,200]}} 2022-11-15 21:35:03.502 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #34 with data {"dp":34,"datatype":0,"data":{"type":"Buffer","data":[7,6,0,0,120,8,0,0,160,18,0,0,220,20,0,0,200]}} 2022-11-15 21:35:03.615 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #35 with data {"dp":35,"datatype":5,"data":{"type":"Buffer","data":[0]}} 2022-11-15 21:35:03.731 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #36 with data {"dp":36,"datatype":1,"data":{"type":"Buffer","data":[0]}} 2022-11-15 21:35:03.848 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #39 with data {"dp":39,"datatype":1,"data":{"type":"Buffer","data":[0]}} 2022-11-15 21:35:03.968 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #47 with data {"dp":47,"datatype":2,"data":{"type":"Buffer","data":[0,0,0,0]}}
-
hab die manufactor id eingefügt, jetzt erkennt er das thermostat, liefert aber keine werte!
2022-11-15 21:35:02.182 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #2 with data {"dp":2,"datatype":4,"data":{"type":"Buffer","data":[2]}} 2022-11-15 21:35:02.434 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #4 with data {"dp":4,"datatype":2,"data":{"type":"Buffer","data":[0,0,0,50]}} 2022-11-15 21:35:02.551 - info: dwd.0 (92835) starting. Version 2.8.3 in /opt/iobroker/node_modules/iobroker.dwd, node: v16.18.1, js-controller: 4.0.23 2022-11-15 21:35:02.555 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #5 with data {"dp":5,"datatype":2,"data":{"type":"Buffer","data":[0,0,0,200]}} 2022-11-15 21:35:02.704 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #7 with data {"dp":7,"datatype":1,"data":{"type":"Buffer","data":[0]}} 2022-11-15 21:35:02.789 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #28 with data {"dp":28,"datatype":0,"data":{"type":"Buffer","data":[1,6,0,0,120,8,0,0,160,18,0,0,220,20,0,0,200]}} 2022-11-15 21:35:02.906 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #29 with data {"dp":29,"datatype":0,"data":{"type":"Buffer","data":[2,6,0,0,120,8,0,0,160,18,0,0,220,20,0,0,200]}} 2022-11-15 21:35:03.032 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #30 with data {"dp":30,"datatype":0,"data":{"type":"Buffer","data":[3,6,0,0,120,8,0,0,160,18,0,0,220,20,0,0,200]}} 2022-11-15 21:35:03.144 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #31 with data {"dp":31,"datatype":0,"data":{"type":"Buffer","data":[4,6,0,0,120,8,0,0,160,18,0,0,220,20,0,0,200]}} 2022-11-15 21:35:03.264 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #32 with data {"dp":32,"datatype":0,"data":{"type":"Buffer","data":[5,6,0,0,120,8,0,0,160,18,0,0,220,20,0,0,200]}} 2022-11-15 21:35:03.380 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #33 with data {"dp":33,"datatype":0,"data":{"type":"Buffer","data":[6,6,0,0,120,8,0,0,160,18,0,0,220,20,0,0,200]}} 2022-11-15 21:35:03.502 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #34 with data {"dp":34,"datatype":0,"data":{"type":"Buffer","data":[7,6,0,0,120,8,0,0,160,18,0,0,220,20,0,0,200]}} 2022-11-15 21:35:03.615 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #35 with data {"dp":35,"datatype":5,"data":{"type":"Buffer","data":[0]}} 2022-11-15 21:35:03.731 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #36 with data {"dp":36,"datatype":1,"data":{"type":"Buffer","data":[0]}} 2022-11-15 21:35:03.848 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #39 with data {"dp":39,"datatype":1,"data":{"type":"Buffer","data":[0]}} 2022-11-15 21:35:03.968 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #47 with data {"dp":47,"datatype":2,"data":{"type":"Buffer","data":[0,0,0,0]}}Ich kann dir da nicht weiterhelfen.
Vielleicht weiß @david-jung ja noch was dazu. -
kann es sein, dass mit den Rechten was nicht stimmt?`
$ iobroker url ioBroker/ioBroker.zigbee --host pi4b --debug install ioBroker/ioBroker.zigbee NPM version: 8.19.2 Installing ioBroker/ioBroker.zigbee... (System call) npm WARN cleanup Failed to remove some directories [npm WARN cleanup [ npm WARN cleanup '/opt/iobroker/node_modules/.zigbee-herdsman-converters-DzgWyYTV',npm WARN cleanup [Error: EACCES: permission denied, scandir '/opt/iobroker/node_modules/.zigbee-herdsman-converters-DzgWyYTV/devices'] {npm WARN cleanup errno: -13,npm WARN cleanup code: 'EACCES',npm WARN cleanup syscall: 'scandir',npm WARN cleanup path: '/opt/iobroker/node_modules/.zigbee-herdsman-converters-DzgWyYTV/devices'npm WARN cleanup }npm WARN cleanup ]npm WARN cleanup -
kann es sein, dass mit den Rechten was nicht stimmt?`
$ iobroker url ioBroker/ioBroker.zigbee --host pi4b --debug install ioBroker/ioBroker.zigbee NPM version: 8.19.2 Installing ioBroker/ioBroker.zigbee... (System call) npm WARN cleanup Failed to remove some directories [npm WARN cleanup [ npm WARN cleanup '/opt/iobroker/node_modules/.zigbee-herdsman-converters-DzgWyYTV',npm WARN cleanup [Error: EACCES: permission denied, scandir '/opt/iobroker/node_modules/.zigbee-herdsman-converters-DzgWyYTV/devices'] {npm WARN cleanup errno: -13,npm WARN cleanup code: 'EACCES',npm WARN cleanup syscall: 'scandir',npm WARN cleanup path: '/opt/iobroker/node_modules/.zigbee-herdsman-converters-DzgWyYTV/devices'npm WARN cleanup }npm WARN cleanup ]npm WARN cleanup@diamand2k22 sagte in (GELÖST) zigbee-herdsmann-converters / wie manuell updaten?:
dass mit den Rechten was nicht stimmt?`
iob stop iob fix iob start -
@diamand2k22 sagte in (GELÖST) zigbee-herdsmann-converters / wie manuell updaten?:
dass mit den Rechten was nicht stimmt?`
iob stop iob fix iob start -
@diamand2k22 sagte in (GELÖST) zigbee-herdsmann-converters / wie manuell updaten?:
Hab's dann doch selber hinbekommen!
Und des Rätsels Lösung war ?
Vll hilft das auch anderen Mitlesenden ! -
@diamand2k22 sagte in (GELÖST) zigbee-herdsmann-converters / wie manuell updaten?:
Hab's dann doch selber hinbekommen!
Und des Rätsels Lösung war ?
Vll hilft das auch anderen Mitlesenden ! -
Dann hast du da mal mit falschen Rechten hantiert.
root login? -
kann sein Thomas, hab ich aber wieder hingebogen bekommen.
@Asgothian
hab mir jetzt ne eigene ketotek.js für mein Heizkörperthermostat gebastelt.
Jetzt funktioniert es wunderbar und ich hab keine Unrecognized DP's mehr und kann es steuern und empfange Temperaturen.
Was mich nur interessieren würde, wie bekomme ich da ein vernünftiges Bild rein?
Kannst du das Thermostat aufnehmen?
Gruß
-
Dann hast du da mal mit falschen Rechten hantiert.
root login?@thomas-braun könntest du deinen externen Konverter zur Verfügung stellen? Sitze schon seit Tagen und komme nicht weiter.
-
@thomas-braun könntest du deinen externen Konverter zur Verfügung stellen? Sitze schon seit Tagen und komme nicht weiter.
Meinen was? Wüsste nicht das ich sowas im Einsatz hätte.
-
Meinen was? Wüsste nicht das ich sowas im Einsatz hätte.
@thomas-braun sorry, die Frage sollte eigentlich an @Diamand2k22 gehen habe mich verklickt^^
-
@thomas-braun sorry, die Frage sollte eigentlich an @Diamand2k22 gehen habe mich verklickt^^
Hast du auch so ein ketotek Teil von Amaz**?
Support us
416
Online32.7k
Users82.5k
Topics1.3m
Posts