Neuer Blogbeitrag: Monatsrückblick - Dezember 2025 🎄

[Diamand2k22]

@thomas-braun

scheint nicht zu klappen :-/

[Thomas Braun]

@diamand2k22

Hier mal geschaut?
https://forum.iobroker.net/topic/59852/hama-smartes-heizkörper-thermostat?_=1668467039158

[Diamand2k22]

@thomas-braun

Hallo Thomas,

hab das mal reinkopiert aber dann startet der zigbee adapter nicht mehr :-/

2022-11-15 21:15:17.734 - error: host.pi4b Caught by controller[0]: /opt/iobroker/node_modules/zigbee-herdsman-converters/devices/saswell.js:52
2022-11-15 21:15:17.734 - error: host.pi4b Caught by controller[0]: .withAwayMode()],
2022-11-15 21:15:17.735 - error: host.pi4b Caught by controller[0]: ^
2022-11-15 21:15:17.735 - error: host.pi4b Caught by controller[0]: TypeError: exposes.climate(...).withSetpoint(...).withLocalTemperature(...).withSystemMode(...).withLocalTemperatureCalibration(...).withAwayMode is not a function
2022-11-15 21:15:17.735 - error: host.pi4b Caught by controller[0]: at Object. (/opt/iobroker/node_modules/zigbee-herdsman-converters/devices/saswell.js:52:18)
2022-11-15 21:15:17.735 - error: host.pi4b Caught by controller[0]: at Module._compile (node:internal/modules/cjs/loader:1155:14)
2022-11-15 21:15:17.735 - error: host.pi4b Caught by controller[0]: at Object.Module._extensions..js (node:internal/modules/cjs/loader:1209:10)
2022-11-15 21:15:17.735 - error: host.pi4b Caught by controller[0]: at Module.load (node:internal/modules/cjs/loader:1033:32)
2022-11-15 21:15:17.735 - error: host.pi4b Caught by controller[0]: at Function.Module._load (node:internal/modules/cjs/loader:868:12)
2022-11-15 21:15:17.735 - error: host.pi4b Caught by controller[0]: at Module.require (node:internal/modules/cjs/loader:1057:19)
2022-11-15 21:15:17.735 - error: host.pi4b Caught by controller[0]: at require (node:internal/modules/cjs/helpers:103:18)
2022-11-15 21:15:17.736 - error: host.pi4b Caught by controller[0]: at Object. (/opt/iobroker/node_modules/zigbee-herdsman-converters/index.js:118:30)
2022-11-15 21:15:17.736 - error: host.pi4b Caught by controller[0]: at Module._compile (node:internal/modules/cjs/loader:1155:14)
2022-11-15 21:15:17.736 - error: host.pi4b Caught by controller[0]: at Object.Module._extensions..js (node:internal/modules/cjs/loader:1209:10)
2022-11-15 21:15:17.736 - error: host.pi4b instance system.adapter.zigbee.0 terminated with code 1 (JS_CONTROLLER_STOPPED)

[Thomas Braun]

@diamand2k22 sagte in (GELÖST) zigbee-herdsmann-converters / wie manuell updaten?:

hab das mal reinkopiert

Was wo reinkopiert?

[Diamand2k22]

@thomas-braun

@david-jung said in Hama Smartes Heizkörper-Thermostat:

@david-jung
so, ich habe folgendes gemacht:

die Datei: /opt/iobroker/node_modules/zigbee-herdsman-converters/devices/saswell.js

etwas erweitert, jetzt kann ich die Ist-Temperatur ablesen, so wie die Soll-Temperatur setzen/lesen.
Den Modus (heizen/auto/aus) lesen, setzen.
Ventil Status ablesen.
Und Offset für Temperatur setzen/lesen.

/opt/iobroker/node_modules/zigbee-herdsman-converters/devices/saswell.js

const exposes = require('../lib/exposes');
const fz = {...require('../converters/fromZigbee'), legacy: require('../lib/legacy').fromZigbee};
const tz = require('../converters/toZigbee');
const tuya = require('../lib/tuya');
const reporting = require('../lib/reporting');
const e = exposes.presets;
const ea = exposes.access;

module.exports = [
    {
        fingerprint: [{modelID: 'GbxAXL2\u0000', manufacturerName: '_TYST11_KGbxAXL2'},
            {modelID: 'uhszj9s\u0000', manufacturerName: '_TYST11_zuhszj9s'},
            {modelID: '88teujp\u0000', manufacturerName: '_TYST11_c88teujp'},
            {modelID: 'w7cahqs\u0000', manufacturerName: '_TYST11_yw7cahqs'},
            {modelID: 'w7cahqs', manufacturerName: '_TYST11_yw7cahqs'},
            {modelID: 'TS0601', manufacturerName: '_TZE200_c88teujp'},
            {modelID: 'TS0601', manufacturerName: '_TZE200_yw7cahqs'},
            {modelID: 'TS0601', manufacturerName: '_TZE200_azqp6ssj'},
            {modelID: 'TS0601', manufacturerName: '_TZE200_bvu2wnxz'},
            {modelID: 'TS0601', manufacturerName: '_TZE200_zuhszj9s'},
            {modelID: 'TS0601', manufacturerName: '_TZE200_9gvruqf5'},
            {modelID: 'TS0601', manufacturerName: '_TZE200_zr9c0day'},
        ],
        model: 'SEA801-Zigbee/SEA802-Zigbee',
        vendor: 'Saswell',
        description: 'Thermostatic radiator valve',
        whiteLabel: [{vendor: 'HiHome', model: 'WZB-TRVL'}, {vendor: 'Hama', model: '00176592'},
            {vendor: 'RTX', model: 'ZB-RT1'}],
        fromZigbee: [fz.saswell_thermostat, fz.ignore_tuya_set_time, fz.ignore_basic_report, fz.legacy.tuya_thermostat_weekly_schedule],
        toZigbee: [tz.saswell_thermostat_current_heating_setpoint, tz.saswell_thermostat_mode, tz.saswell_thermostat_away,
            tz.saswell_thermostat_child_lock, tz.saswell_thermostat_window_detection, tz.saswell_thermostat_frost_detection,
            tz.saswell_thermostat_calibration, tz.saswell_thermostat_anti_scaling, tz.tuya_thermostat_weekly_schedule],
        onEvent: tuya.onEventSetTime,
        meta: {
            thermostat: {
                weeklyScheduleMaxTransitions: 4,
                weeklyScheduleSupportedModes: [1], // bits: 0-heat present, 1-cool present (dec: 1-heat,2-cool,3-heat+cool)
                weeklyScheduleConversion: 'saswell',
            },
        },
        configure: async (device, coordinatorEndpoint, logger) => {
            const endpoint = device.getEndpoint(1);
            await reporting.bind(endpoint, coordinatorEndpoint, ['genBasic']);
        },
        exposes: [e.battery_low(), e.window_detection(), e.child_lock(),
            exposes.binary('heating', ea.STATE, 'ON', 'OFF').withDescription('Device valve is open or closed (heating or not)'),
            exposes.climate()
                .withSetpoint('current_heating_setpoint', 5, 30, 0.5, ea.STATE_SET).withLocalTemperature(ea.STATE)
                .withSystemMode(['off', 'heat', 'auto'], ea.STATE_SET)
                // Range is -6 - 6 and step 1: https://github.com/Koenkk/zigbee2mqtt/issues/11777
                .withLocalTemperatureCalibration(-6, 6, 1, ea.STATE_SET)
                .withAwayMode()],
    },
	{
		/*added by djung 10.11.2022*/
	fingerprint: [{modelID: 'TS0601', manufacturerName: '_TZE200_h4cgnbzg'}],
        model: 'HZ',
        vendor: 'HAMA',
        description: 'Thermostatic radiator valve',
        whiteLabel: [{vendor: 'Hama', model: 'XXXxxxXXX'},],
        fromZigbee: [fz.saswell_thermostat],
        toZigbee: [tz.saswell_thermostat_current_heating_setpoint, tz.saswell_thermostat_mode, 
            tz.saswell_thermostat_calibration],
        onEvent: tuya.onEventSetTime,
        configure: async (device, coordinatorEndpoint, logger) => {
            const endpoint = device.getEndpoint(1);
            await reporting.bind(endpoint, coordinatorEndpoint, ['genBasic']);
        },
        exposes: [
			e.battery_low(),
			/*e.switch(),*/
			/*e.lock(),*/
			exposes.binary('heating', ea.STATE, 'ON', 'OFF').withDescription('Device valve is open or closed (heating or not)'),
		
            exposes.climate()
                .withSetpoint('current_heating_setpoint', 5, 30, 0.5, ea.STATE_SET).withLocalTemperature(ea.STATE)
                .withSystemMode(['off', 'heat', 'auto'], ea.STATE_SET)
                // Range is -6 - 6 and step 1: https://github.com/Koenkk/zigbee2mqtt/issues/11777
                .withLocalTemperatureCalibration(-6, 6, 1, ea.STATE_SET)
                ],
    },
];

soll man das irgendwo auf github oder so noch posten? Wenn ja, bitte zeigen wo =)
Grüße.
David.

[Thomas Braun]

@diamand2k22

Alles? Das war nur als Denkansatz für dich gedacht.
Ich hätte da erstmal nur die Manufacturer-ID hinzugefügt. Sind ja schon ein paar Varianten von dem Thermostat mit der Modellbezeichnung TS0601 vorhanden.

[Diamand2k22]

@thomas-braun

hab die manufactor id eingefügt, jetzt erkennt er das thermostat, liefert aber keine werte!

2022-11-15 21:35:02.182 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #2 with data {"dp":2,"datatype":4,"data":{"type":"Buffer","data":[2]}}
2022-11-15 21:35:02.434 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #4 with data {"dp":4,"datatype":2,"data":{"type":"Buffer","data":[0,0,0,50]}}
2022-11-15 21:35:02.551 - info: dwd.0 (92835) starting. Version 2.8.3 in /opt/iobroker/node_modules/iobroker.dwd, node: v16.18.1, js-controller: 4.0.23
2022-11-15 21:35:02.555 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #5 with data {"dp":5,"datatype":2,"data":{"type":"Buffer","data":[0,0,0,200]}}
2022-11-15 21:35:02.704 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #7 with data {"dp":7,"datatype":1,"data":{"type":"Buffer","data":[0]}}
2022-11-15 21:35:02.789 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #28 with data {"dp":28,"datatype":0,"data":{"type":"Buffer","data":[1,6,0,0,120,8,0,0,160,18,0,0,220,20,0,0,200]}}
2022-11-15 21:35:02.906 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #29 with data {"dp":29,"datatype":0,"data":{"type":"Buffer","data":[2,6,0,0,120,8,0,0,160,18,0,0,220,20,0,0,200]}}
2022-11-15 21:35:03.032 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #30 with data {"dp":30,"datatype":0,"data":{"type":"Buffer","data":[3,6,0,0,120,8,0,0,160,18,0,0,220,20,0,0,200]}}
2022-11-15 21:35:03.144 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #31 with data {"dp":31,"datatype":0,"data":{"type":"Buffer","data":[4,6,0,0,120,8,0,0,160,18,0,0,220,20,0,0,200]}}
2022-11-15 21:35:03.264 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #32 with data {"dp":32,"datatype":0,"data":{"type":"Buffer","data":[5,6,0,0,120,8,0,0,160,18,0,0,220,20,0,0,200]}}
2022-11-15 21:35:03.380 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #33 with data {"dp":33,"datatype":0,"data":{"type":"Buffer","data":[6,6,0,0,120,8,0,0,160,18,0,0,220,20,0,0,200]}}
2022-11-15 21:35:03.502 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #34 with data {"dp":34,"datatype":0,"data":{"type":"Buffer","data":[7,6,0,0,120,8,0,0,160,18,0,0,220,20,0,0,200]}}
2022-11-15 21:35:03.615 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #35 with data {"dp":35,"datatype":5,"data":{"type":"Buffer","data":[0]}}
2022-11-15 21:35:03.731 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #36 with data {"dp":36,"datatype":1,"data":{"type":"Buffer","data":[0]}}
2022-11-15 21:35:03.848 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #39 with data {"dp":39,"datatype":1,"data":{"type":"Buffer","data":[0]}}
2022-11-15 21:35:03.968 - warn: zigbee.0 (92569) zigbee-herdsman-converters:SaswellThermostat: Unrecognized DP #47 with data {"dp":47,"datatype":2,"data":{"type":"Buffer","data":[0,0,0,0]}}

[Thomas Braun]

@diamand2k22

Ich kann dir da nicht weiterhelfen.
Vielleicht weiß @david-jung ja noch was dazu.

[Diamand2k22]

@thomas-braun

kann es sein, dass mit den Rechten was nicht stimmt?`

$ iobroker url ioBroker/ioBroker.zigbee --host pi4b --debug

install ioBroker/ioBroker.zigbee

NPM version: 8.19.2

Installing ioBroker/ioBroker.zigbee... (System call)

npm WARN cleanup Failed to remove some directories [npm WARN cleanup [

npm WARN cleanup '/opt/iobroker/node_modules/.zigbee-herdsman-converters-DzgWyYTV',npm WARN cleanup [Error: EACCES: permission denied, scandir '/opt/iobroker/node_modules/.zigbee-herdsman-converters-DzgWyYTV/devices'] {npm WARN cleanup errno: -13,npm WARN cleanup code: 'EACCES',npm WARN cleanup syscall: 'scandir',npm WARN cleanup path: '/opt/iobroker/node_modules/.zigbee-herdsman-converters-DzgWyYTV/devices'npm WARN cleanup }npm WARN cleanup ]npm WARN cleanup 

[Thomas Braun]

@diamand2k22 sagte in (GELÖST) zigbee-herdsmann-converters / wie manuell updaten?:

dass mit den Rechten was nicht stimmt?`

iob stop
iob fix
iob start

[Diamand2k22]

@thomas-braun

danke dir für die schnelle Rückmeldung.
Hab's dann doch selber hinbekommen!

Gruß

[DJMarc75]

@diamand2k22 sagte in (GELÖST) zigbee-herdsmann-converters / wie manuell updaten?:

Hab's dann doch selber hinbekommen!

Und des Rätsels Lösung war ?
Vll hilft das auch anderen Mitlesenden !

[Diamand2k22]

@djmarc75

hat Thomas schon geschrieben.

iob stop
iob fix
iob start

Gruß

[Thomas Braun]

@diamand2k22

Dann hast du da mal mit falschen Rechten hantiert.
root login?

[Diamand2k22]

@thomas-braun

kann sein Thomas, hab ich aber wieder hingebogen bekommen.

@Asgothian
hab mir jetzt ne eigene ketotek.js für mein Heizkörperthermostat gebastelt.
Jetzt funktioniert es wunderbar und ich hab keine Unrecognized DP's mehr und kann es steuern und empfange Temperaturen.
Was mich nur interessieren würde, wie bekomme ich da ein vernünftiges Bild rein?
Kannst du das Thermostat aufnehmen?

Gruß

[Patrick Kenzler]

@thomas-braun könntest du deinen externen Konverter zur Verfügung stellen? Sitze schon seit Tagen und komme nicht weiter.

[Thomas Braun]

@patrick-kenzler

Meinen was? Wüsste nicht das ich sowas im Einsatz hätte.

[Patrick Kenzler]

@thomas-braun sorry, die Frage sollte eigentlich an @Diamand2k22 gehen habe mich verklickt^^

[Diamand2k22]

@patrick-kenzler

Hast du auch so ein ketotek Teil von Amaz**?

[Patrick Kenzler]

@diamand2k22 said in (GELÖST) zigbee-herdsmann-converters / wie manuell updaten?:

@patrick-kenzler

Hast du auch so ein ketotek Teil von Amaz**?

nein, aber Avatto ME167 das wird auch unter _TZE200_bvu2wnxz geführt.