Neuer ioBroker-Blog online: Monatsrückblick März/April 2026

[Gismoh]

@Thomas-Braun
Merci, vermutlich ist dies die Antwort auf dein Post ;)
(Die Sensoren laufen über Zigbee auf den ConBee 2 Stick)

deconz.0	2020-12-17 17:13:52.825	info	(16123) Adapter is ready
deconz.0	2020-12-17 17:12:51.561	info	(16123) deConz Version: 2.5.88; API version: 1.16.0
deconz.0	2020-12-17 17:12:51.485	info	(16123) Please wait while adapter is starting
deconz.0	2020-12-17 17:12:51.450	info	(16123) starting. Version 2.0.5 in /opt/iobroker/node_modules/iobroker.deconz, node: v12.20.0, js-controller: 3.1.6
deconz.0	2020-12-17 17:12:46.282	info	(1117) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
deconz.0	2020-12-17 17:12:46.281	info	(1117) terminating
deconz.0	2020-12-17 17:12:46.280	info	(1117) cleaned everything up...
deconz.0	2020-12-17 17:12:46.278	info	(1117) Got terminate signal TERMINATE_YOURSELF
deconz.0	2020-12-17 16:50:35.475	info	(1117) Adapter is ready

Auch merkwürdig: Die beiden vorher eingebunden Fenstersensoren funktionieren auch nicht mehr im IOBroker. Also, keine Zustandsänderung.

[Thomas Braun]

@Gismoh
deconz 2.0.5 ist 'zurückgepfiffen' worden.
Aktuell ist 1.3.11.
Dafür ist deconz 2.07.01 aktuell.
Also erstmal beides auf die aktuellen Versionen bringen.

[Gismoh]

@Thomas-Braun
Merci, nun ist nur die Frage wie.
Im IOBroker wird mir keine neuere Version angeboten und im Phoscom steht auch, das ich die aktuellste Version bereits hätte.

[Thomas Braun]

@Gismoh

deconz:

sudo apt update
apt policy deconz

Adapter:

iobroker update
iobroker upgrade deconz@1.3.11

[Gismoh]

@Thomas-Braun
uhh, ge*l DANKE!!!
Setze mich direkt ran ;)

[Gismoh]

@Thomas-Braun
irgendwas läuft hier verkehrt, habe dies nun schon mehrfach vesucht.
In den Adaptereinstellungen steht bei Deconz.0 immer noch 2.5.88
und im Phoscon noch 2.05.88.

deconz.0	2020-12-17 22:44:55.749	info	(7420) deConz Version: 2.5.88; API version: 1.16.0
deconz.0	2020-12-17 22:44:55.602	info	(7420) starting. Version 1.3.11 in /opt/iobroker/node_modules/iobroker.deconz, node: v12.20.0, js-controller: 3.1.6
deconz.0	2020-12-17 22:44:53.592	warn	(6569) Got terminate signal. Checking desired PID: 7420 vs own PID 6569
deconz.0	2020-12-17 22:44:53.583	info	(6569) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
deconz.0	2020-12-17 22:44:53.581	info	(6569) terminating
deconz.0	2020-12-17 22:44:53.580	info	(6569) cleaned everything up...
deconz.0	2020-12-17 22:44:53.577	warn	(6569) Got terminate signal. Checking desired PID: 0 vs own PID 6569
deconz.0	2020-12-17 22:43:31.538	info	(6569) deConz Version: 2.5.88; API version: 1.16.0
deconz.0	2020-12-17 22:43:31.419	info	(6569) starting. Version 1.3.11 in /opt/iobroker/node_modules/iobroker.deconz, node: v12.20.0, js-controller: 3.1.6
deconz.0	2020-12-17 22:43:29.320	warn	(6536) Got terminate signal. Checking desired PID: 6569 vs own PID 6536
deconz.0	2020-12-17 22:43:29.315	info	(6536) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
deconz.0	2020-12-17 22:43:29.313	info	(6536) terminating
deconz.0	2020-12-17 22:43:29.312	info	(6536) cleaned everything up...
deconz.0	2020-12-17 22:43:29.310	warn	(6536) Got terminate signal. Checking desired PID: 0 vs own PID 6536
deconz.0	2020-12-17 22:43:28.645	info	(6536) deConz Version: 2.5.88; API version: 1.16.0
deconz.0	2020-12-17 22:43:28.522	info	(6536) starting. Version 1.3.11 in /opt/iobroker/node_modules/iobroker.deconz, node: v12.20.0, js-controller: 3.1.6
deconz.0	2020-12-17 22:43:22.531	info	(5029) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
deconz.0	2020-12-17 22:43:22.530	info	(5029) terminating
deconz.0	2020-12-17 22:43:22.529	info	(5029) cleaned everything up...
deconz.0	2020-12-17 22:43:22.527	info	(5029) Got terminate signal TERMINATE_YOURSELF
deconz.0	2020-12-17 22:41:01.745	info	(5029) deConz Version: 2.5.88; API version: 1.16.0
deconz.0	2020-12-17 22:41:01.617	info	(5029) starting. Version 1.3.11 in /opt/iobroker/node_modules/iobroker.deconz, node: v12.20.0, js-controller: 3.1.6
deconz.0	2020-12-17 22:40:55.287	info	(2902) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
deconz.0	2020-12-17 22:40:55.285	info	(2902) terminating
deconz.0	2020-12-17 22:40:55.284	info	(2902) cleaned everything up...
deconz.0	2020-12-17 22:40:55.282	info	(2902) Got terminate signal TERMINATE_YOURSELF
deconz.0	2020-12-17 22:37:36.636	info	(2902) starting. Version 1.3.11 in /opt/iobroker/node_modules/iobroker.deconz, node: v12.20.0, js-controller: 3.1.6
deconz.0	2020-12-17 22:37:31.313	info	(1108) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
deconz.0	2020-12-17 22:37:31.311	info	(1108) terminating
deconz.0	2020-12-17 22:37:31.310	info	(1108) cleaned everything up...
deconz.0	2020-12-17 22:37:31.307	info	(1108) Got terminate signal TERMINATE_YOURSELF

[Thomas Braun]

@Gismoh Wie hast du deconz/phoscon denn installiert? Nicht über apt?
Was liefert der obige Kram zurück?
Insbesondere der Part mit apt. Der Adapter ist ja jetzt auf der letzten Version.

[Gismoh]

@Thomas-Braun
wie ich deconz/phoscon installiert hatte weis ich gar nicht mehr,
nach irgendeiner Anleitung

root@raspberrypi:/home/pi# sudo apt update
Hit:1 http://phoscon.de/apt/deconz buster InRelease
Hit:2 http://archive.raspberrypi.org/debian buster InRelease
Hit:3 http://raspbian.raspberrypi.org/raspbian buster InRelease
Hit:4 https://repos.influxdata.com/debian buster InRelease
Hit:5 https://deb.nodesource.com/node_12.x buster InRelease
Hit:6 https://archive.raspbian.org/raspbian buster InRelease
Reading package lists... Done
Building dependency tree
Reading state information... Done
31 packages can be upgraded. Run 'apt list --upgradable' to see them.
root@raspberrypi:/home/pi# apt policy deconz
deconz:
  Installed: 2.05.88-raspbian-buster-stable
  Candidate: 2.07.01-raspbian-buster-stable
  Version table:
     2.07.01-raspbian-buster-stable 500
        500 http://phoscon.de/apt/deconz buster/main armhf Packages
 *** 2.05.88-raspbian-buster-stable 100
        100 /var/lib/dpkg/status
root@raspberrypi:/home/pi# iobroker update
Used repository: Stable (default)
hash unchanged, use cached sources
update done
Adapter    "admin"         : 4.1.11   , installed 4.1.12
Adapter    "alarm"         : 1.8.2
Adapter    "alexa2"        : 3.3.5    , installed 3.4.0
Adapter    "alpha2"        : 1.0.0
Adapter    "amazon-dash"   : 1.1.0
Adapter    "artnet"        : 1.2.2
Adapter    "asterisk"      : 1.0.6
Adapter    "asuswrt"       : 1.0.1    , installed 1.0.1
Adapter    "b-control-em"  : 0.2.1
Adapter    "backitup"      : 1.7.0    , installed 1.8.2
Adapter    "beckhoff"      : 1.2.2
Adapter    "benq"          : 0.2.0
Adapter    "binance"       : 1.1.3
Adapter    "ble"           : 0.12.0   , installed 0.12.0
Adapter    "bmw"           : 1.3.3
Adapter    "bosesoundtouch": 0.2.4
Adapter    "botvac"        : 1.0.0
Adapter    "bring"         : 1.7.3
Adapter    "broadlink2"    : 2.0.3
Adapter    "bsblan"        : 0.2.0
Adapter    "bshb"          : 0.1.10
Adapter    "chromecast"    : 2.3.1
Adapter    "cloud"         : 3.1.0    , installed 3.1.0
Adapter    "comfoair"      : 0.3.2
Adapter    "contactid"     : 1.0.1
Adapter    "coronavirus-statistics": 0.6.3
Adapter    "countdown"     : 1.1.0
Adapter    "cul"           : 1.3.3
Adapter    "daikin"        : 1.1.3
Adapter    "daswetter"     : 3.0.4    , installed 3.0.4
Adapter    "deconz"        : 1.3.11   , installed 1.3.11
Adapter    "denon"         : 1.7.7
Adapter    "device-reminder": 0.6.2
Adapter    "devices"       : 0.3.13
Adapter    "digitalstrom"  : 0.5.5
Adapter    "discovergy"    : 0.5.0
Adapter    "discovery"     : 2.3.11   , installed 2.4.1
Adapter    "doorio"        : 1.1.1
Adapter    "ds18b20"       : 1.1.5
Adapter    "dwd"           : 2.5.1
Adapter    "ebus"          : 2.1.1
Adapter    "ecovacs-deebot": 1.0.3
Adapter    "egigeozone"    : 0.1.2
Adapter    "ekey"          : 1.1.0
Adapter    "email"         : 1.0.7
Adapter    "emby"          : 1.0.2
Adapter    "energymanager" : 1.2.3
Adapter    "enet"          : 1.0.1
Adapter    "epson_stylus_px830": 0.2.1
Adapter    "exchangerates" : 0.0.13
Adapter    "fahrplan"      : 1.0.0
Adapter    "fakeroku"      : 0.2.1
Adapter    "fb-checkpresence": 1.1.0
Adapter    "feiertage"     : 1.0.17
Adapter    "fhem"          : 1.5.3
Adapter    "find-my-iphone": 0.2.15
Adapter    "firetv"        : 1.0.0
Adapter    "flot"          : 1.10.4   , installed 1.10.4
Adapter    "followthesun"  : 0.2.4
Adapter    "foobar2000"    : 2.0.3
Adapter    "fritzbox"      : 0.2.1
Adapter    "fritzdect"     : 0.2.4    , installed 0.3.2
Adapter    "fronius"       : 1.0.5
Adapter    "frontier_silicon": 0.0.10
Adapter    "fullcalendar"  : 1.1.0
Adapter    "fullybrowser"  : 2.0.1
Adapter    "g-homa"        : 0.5.3
Adapter    "geofency"      : 0.3.2
Adapter    "growatt"       : 0.0.14
Adapter    "gruenbeck"     : 0.0.21
Adapter    "habpanel"      : 0.4.3
Adapter    "haier"         : 1.0.2
Adapter    "ham"           : 3.0.2
Adapter    "ham-wemo"      : 1.1.0
Adapter    "harmony"       : 1.2.2    , installed 1.2.2
Adapter    "heatingcontrol": 1.0.0
Adapter    "heos"          : 1.6.1
Adapter    "heytech"       : 1.0.0
Adapter    "hid"           : 0.1.17
Adapter    "history"       : 1.9.10
Adapter    "hm-rega"       : 2.6.24
Adapter    "hm-rpc"        : 1.14.24
Adapter    "hmip"          : 1.5.0
Adapter    "homeconnect"   : 0.0.31
Adapter    "homee"         : 1.0.7
Adapter    "homepilot"     : 1.0.3
Adapter    "hp-ilo"        : 1.0.6
Adapter    "hs100"         : 2.0.1
Adapter    "hue"           : 3.3.8    , installed 3.3.8
Adapter    "hue-extended"  : 2.0.0    , installed 2.0.0
Adapter    "i2c"           : 1.1.1
Adapter    "ical"          : 1.7.4
Adapter    "icons-addictive-flavour-png": 0.1.0
Adapter    "icons-fatcow-hosting": 0.1.0
Adapter    "icons-icons8"  : 0.0.1
Adapter    "icons-material-png": 0.1.0
Adapter    "icons-material-svg": 0.1.0
Adapter    "icons-mfd-png" : 1.0.2
Adapter    "icons-mfd-svg" : 1.0.2    , installed 1.0.2
Adapter    "icons-open-icon-library-png": 0.1.2
Adapter    "icons-ultimate-png": 1.0.1
Adapter    "influxdb"      : 1.9.3    , installed 1.9.3
Adapter    "info"          : 1.7.10   , installed 1.7.12
Adapter    "innogy-smarthome": 0.3.6
Adapter    "iogo"          : 0.5.10
Adapter    "iot"           : 1.8.5    , installed 1.8.5
Adapter    "iqontrol"      : 1.5.0
Adapter    "jarvis"        : 2.0.0
Adapter    "javascript"    : 4.8.4    , installed 4.10.8
Adapter    "jeelink"       : 0.1.0
Controller "js-controller" : 3.1.6    , installed 3.1.6
Adapter    "kecontact"     : 1.0.1
Adapter    "klf200"        : 1.0.1
Adapter    "km200"         : 1.1.6
Adapter    "knmi-weather"  : 1.0.0
Adapter    "knx"           : 1.0.39
Adapter    "kodi"          : 2.0.4
Adapter    "kostal-piko-ba": 1.1.3
Adapter    "kress"         : 2.5.5
Adapter    "lametric"      : 1.0.0
Adapter    "landroid"      : 1.0.3
Adapter    "lcn"           : 1.0.2
Adapter    "legrand-ecocompteur": 1.0.0
Adapter    "letrika_comgw" : 0.0.5
Adapter    "lgtv"          : 1.1.10
Adapter    "lgtv-rs"       : 0.1.0
Adapter    "lgtv11"        : 1.0.5
Adapter    "lifx"          : 0.1.0
Adapter    "lightify"      : 0.2.16
Adapter    "link"          : 0.5.9
Adapter    "linkeddevices" : 1.4.0
Adapter    "linux-control" : 1.0.1
Adapter    "logparser"     : 1.1.0
Adapter    "lovelace"      : 1.0.16
Adapter    "loxone"        : 2.0.2
Adapter    "luftdaten"     : 1.0.1
Adapter    "lupusec"       : 1.2.9
Adapter    "luxtronik1"    : 0.2.2
Adapter    "material"      : 0.13.9
Adapter    "maxcube"       : 1.0.2
Adapter    "maxcul"        : 1.3.1
Adapter    "mbus"          : 2.3.1
Adapter    "mclighting"    : 0.1.1
Adapter    "megad"         : 1.2.1
Adapter    "megadd"        : 0.2.0
Adapter    "megaesp"       : 0.1.0
Adapter    "melcloud"      : 1.0.6
Adapter    "mercedesme"    : 0.0.42
Adapter    "mercury"       : 0.1.1
Adapter    "meross"        : 1.5.0
Adapter    "meteoalarm"    : 1.0.9
Adapter    "midea"         : 0.0.6
Adapter    "miele"         : 0.1.5
Adapter    "mielecloudservice": 2.0.0
Adapter    "mihome"        : 1.3.6
Adapter    "mihome-lamp"   : 1.1.0
Adapter    "mihome-plug"   : 0.2.1
Adapter    "mihome-vacuum" : 2.1.1    , installed 2.1.1
Adapter    "mikrotik"      : 1.0.11
Adapter    "milight"       : 0.3.6
Adapter    "milight-smart-light": 0.2.7
Adapter    "minuvis"       : 1.0.0
Adapter    "mobile"        : 1.0.1    , installed 1.0.1
Adapter    "modbus"        : 3.1.10
Adapter    "moma"          : 1.2.7
Adapter    "mpd"           : 1.0.5
Adapter    "mqtt"          : 2.1.9
Adapter    "mqtt-client"   : 1.3.1
Adapter    "musiccast"     : 0.1.3
Adapter    "mydlink"       : 1.1.7
Adapter    "mysensors"     : 2.0.1
Adapter    "nanoleaf-lightpanels": 1.0.6
Adapter    "netatmo"       : 1.3.3
Adapter    "netatmo-crawler": 0.3.8
Adapter    "nibeuplink"    : 0.3.0
Adapter    "nina"          : 0.0.23
Adapter    "node-red"      : 2.0.1
Adapter    "nuki"          : 1.4.2
Adapter    "nuki-extended" : 2.3.0
Adapter    "nut"           : 1.1.3
Adapter    "octoprint"     : 1.0.3
Adapter    "odl"           : 1.0.7
Adapter    "oilfox"        : 0.0.5
Adapter    "onkyo"         : 2.0.3
Adapter    "onvif"         : 0.4.4
Adapter    "openhab"       : 1.1.0
Adapter    "openligadb"    : 1.1.0
Adapter    "openweathermap": 0.1.0    , installed 0.1.0
Adapter    "opi"           : 0.1.1
Adapter    "oppoplayer"    : 0.2.1
Adapter    "owfs"          : 0.6.4
Adapter    "owntracks"     : 0.6.3
Adapter    "panasonic-viera": 1.0.2
Adapter    "parser"        : 1.0.7
Adapter    "paw"           : 0.0.7
Adapter    "phantomjs"     : 1.1.2
Adapter    "pi-hole"       : 1.3.1    , installed 1.3.1
Adapter    "piface"        : 1.0.0
Adapter    "pimatic"       : 0.3.0
Adapter    "ping"          : 1.4.12   , installed 1.4.12
Adapter    "places"        : 1.0.0
Adapter    "plex"          : 0.8.11
Adapter    "plexconnect"   : 0.0.7
Adapter    "pollenflug"    : 1.0.6
Adapter    "proxmox"       : 1.0.1
Adapter    "proxy"         : 1.2.1
Adapter    "pushbullet"    : 0.0.11
Adapter    "pushover"      : 2.0.3
Adapter    "pushsafer"     : 0.1.8
Adapter    "radar2"        : 1.0.9    , installed 2.0.1
Adapter    "radiohead"     : 1.0.7
Adapter    "rflink"        : 2.1.6
Adapter    "rickshaw"      : 1.0.0
Adapter    "ring"          : 1.1.3
Adapter    "robonect"      : 0.1.3
Adapter    "roomba"        : 1.1.1
Adapter    "rpi2"          : 1.2.0
Adapter    "s7"            : 1.1.9
Adapter    "samsung"       : 0.2.9
Adapter    "sayit"         : 1.12.2
Adapter    "sbfspot"       : 4.0.2
Adapter    "scenes"        : 2.3.0
Adapter    "schoolfree"    : 0.7.0
Adapter    "schwoerer-ventcube": 1.3.0
Adapter    "shelly"        : 4.0.3
Adapter    "shuttercontrol": 1.0.4
Adapter    "sia"           : 1.0.4
Adapter    "siegenia"      : 1.0.0
Adapter    "simple-api"    : 2.4.8    , installed 2.4.8
Adapter    "smappee"       : 0.2.2
Adapter    "smartcontrol"  : 1.2.1
Adapter    "smartgarden"   : 1.0.1
Adapter    "smartmeter"    : 3.1.6
Adapter    "snips"         : 1.5.1
Adapter    "snmp"          : 0.5.0
Adapter    "socketio"      : 3.0.13   , installed 3.0.13
Adapter    "solarlog"      : 2.0.0
Adapter    "solarviewdatareader": 0.2.1
Adapter    "solarwetter"   : 1.0.0
Adapter    "sonnen"        : 1.7.0
Adapter    "sonoff"        : 2.3.3    , installed 2.3.3
Adapter    "sonos"         : 2.1.1
Adapter    "sony-bravia"   : 1.0.1
Adapter    "spotify-premium": 1.0.0
Adapter    "sql"           : 1.15.3
Adapter    "squeezebox"    : 1.0.0
Adapter    "squeezeboxrpc" : 1.0.0
Adapter    "starline"      : 1.0.0
Adapter    "statistics"    : 0.2.2
Adapter    "stiebel-isg"   : 1.5.1
Adapter    "sunnyportal"   : 0.1.5
Adapter    "swiss-weather-api": 0.3.2
Adapter    "synology"      : 0.1.18
Adapter    "systeminfo"    : 0.3.1
Adapter    "tahoma"        : 0.3.2
Adapter    "tankerkoenig"  : 2.0.5
Adapter    "telegram"      : 1.6.0    , installed 1.6.1
Adapter    "terminal"      : 0.1.2
Adapter    "tesla-motors"  : 0.2.3
Adapter    "text2command"  : 2.0.5
Adapter    "tinker"        : 1.1.0
Adapter    "tr-064"        : 4.2.1    , installed 4.2.1
Adapter    "tradfri"       : 2.6.5
Adapter    "trashschedule" : 1.0.3
Adapter    "tunnelbroker-endpoint-updater": 0.0.1
Adapter    "tuya"          : 3.4.1
Adapter    "tvspielfilm"   : 1.0.4
Adapter    "unifi"         : 0.5.8
Adapter    "upnp"          : 1.0.16
Adapter    "vaillant"      : 0.0.10
Adapter    "valloxmv"      : 1.1.1
Adapter    "vcard"         : 0.0.9
Adapter    "velux"         : 0.0.6
Adapter    "viessmann"     : 1.3.2
Adapter    "virtualpowermeter": 1.2.1
Adapter    "vis"           : 1.3.4    , installed 1.3.6
Adapter    "vis-bars"      : 0.1.4
Adapter    "vis-canvas-gauges": 0.1.5
Adapter    "vis-colorpicker": 1.2.0
Adapter    "vis-fancyswitch": 1.1.0
Adapter    "vis-google-fonts": 0.1.0
Adapter    "vis-history"   : 1.0.0
Adapter    "vis-hqwidgets" : 1.1.7    , installed 1.1.7
Adapter    "vis-icontwo"   : 0.34.0
Adapter    "vis-inventwo"  : 2.5.11
Adapter    "vis-jqui-mfd"  : 1.0.12   , installed 1.0.12
Adapter    "vis-justgage"  : 1.0.2
Adapter    "vis-keyboard"  : 0.0.2
Adapter    "vis-lcars"     : 1.0.4
Adapter    "vis-map"       : 1.0.4
Adapter    "vis-material-advanced": 1.3.0   , installed 1.3.0
Adapter    "vis-metro"     : 1.1.2    , installed 1.1.2
Adapter    "vis-players"   : 0.1.6
Adapter    "vis-plumb"     : 1.0.2
Adapter    "vis-rgraph"    : 0.0.2
Adapter    "vis-timeandweather": 1.1.7   , installed 1.1.7
Adapter    "vis-weather"   : 2.5.2
Adapter    "volvo"         : 0.0.3
Adapter    "vr200"         : 1.0.0
Adapter    "vw-connect"    : 0.0.21
Adapter    "weatherunderground": 3.2.1
Adapter    "web"           : 3.0.14   , installed 3.1.0
Adapter    "weishaupt-wem" : 0.0.8
Adapter    "whatsapp-cmb"  : 0.1.6
Adapter    "wiffi-wz"      : 2.2.0
Adapter    "wifilight"     : 1.1.0
Adapter    "windows-control": 0.1.5
Adapter    "wled"          : 0.5.2
Adapter    "wm-bus"        : 0.1.12
Adapter    "wolf"          : 1.2.1
Adapter    "worx"          : 1.2.3    , installed 1.2.4
Adapter    "xbox"          : 0.6.8
Adapter    "xs1"           : 1.0.2
Adapter    "yahka"         : 0.11.0
Adapter    "yamaha"        : 0.4.0
Adapter    "yeelight-2"    : 1.0.3
Adapter    "youtube"       : 1.0.0
Adapter    "yr"            : 2.0.3
Adapter    "zigbee"        : 1.3.1
Adapter    "zont"          : 0.5.3
Adapter    "zwave"         : 2.0.1
Adapter    "zwave2"        : 1.8.0
root@raspberrypi:/home/pi# iobroker upgrade deconz@1.3.11
Update deconz from @1.3.11 to @1.3.11
NPM version: 6.14.8
npm install iobroker.deconz@1.3.11 --loglevel error --prefix "/opt/iobroker" (Sy                                        stem call)
upload [3] deconz.admin /opt/iobroker/node_modules/iobroker.deconz/admin/words.js words.js application/javascript
Update "system.adapter.deconz.0"
upload [2] deconz.admin /opt/iobroker/node_modules/iobroker.deconz/admin/instruction.png instruction.png image/png
upload [1] deconz.admin /opt/iobroker/node_modules/iobroker.deconz/admin/index_m.html index_m.html text/html
upload [0] deconz.admin /opt/iobroker/node_modules/iobroker.deconz/admin/deconz.png deconz.png image/png
Adapter "deconz" updated
root@raspberrypi:/home/pi#

[Thomas Braun]

@Gismoh Und bitte dringend auch irgendeine Anleitung lesen, warum man sich nicht als root anmeldet!

[Gismoh]

@Thomas-Braun
Okay

[Thomas Braun]

@Gismoh Und danach kannst du irgendeine Anleitung lesen wie man sein System regelmäßig up-to-date hält. Dann kommt auch deconz in aktueller Version mit.

[Gismoh]

@Thomas-Braun
Okay, dann update ich erst einmal.
Beim ersten mal hatte ich mich allerdings auch ohne sudo su angemeldet und die Befehle ausprobiert,
da es nicht funktionierte hatte ich es "mit" ausprobiert.

Merci

[Thomas Braun]

@Gismoh Sich als root anmelden ist NIE die Lösung. Wo kommt der Blödsinn her?

[Gismoh]

@Thomas-Braun
Bin hier komplett neu, bisher ausschließlich Windoofs user.
Hatte ich vermutlich aus irgendeiner Anleitung oder youtube-Video.

[Thomas Braun]

@Gismoh Dann kannst du auch noch ein

iobroker fix

hinterherwerfen. Kann sein dass du dir mit dem root-login jetzt da die Rechte verbogen hast.

[Gismoh]

@Thomas-Braun
Merci, werde ich machen.

Hatte die Tage mal ein Update gemacht, danach hatte ich mit verschiedenen Adaptern probleme und hatte daher eine Sicherung wieder eingespielt.
Daher hatte ich ersteinmal die Finger davon gelassen (dont touch a running system).

Probleme habe ich dann erst heute bekommen.

[Thomas Braun]

@Gismoh 'Don't touch a running system' ist genauso ein Blödsinn wir der root-login.
Aktuelle Versionen kommen ja nicht heraus, weil die alte fehlerfrei wäre. Von Beta/latest sollte man dann allerdings die Finger lassen.

[Gismoh]

@Thomas-Braun
okay ;)

So, nun restartet er, bin mal gespannt....

[Gismoh]

@Thomas-Braun

Merci

Nun bin ich gespannt ob die Aqara Fenstersensoren auch im IOBroker funktionieren.
Mist die wollen immer noch nicht, auch nicht die, welche bis heute gingen.

[Gismoh]

@Thomas-Braun
leider wie vorher, in der Phoscon App werden die korrekt angezeit, also Offen/geschlossen.
Im IOBroker Deconz adapter bleiben die allerdings auf geschlossen.

deconz.0	2020-12-17 23:14:29.584	info	(1091) deConz Version: 2.7.1; API version: 1.16.0
deconz.0	2020-12-17 23:14:29.400	info	(1091) starting. Version 1.3.11 in /opt/iobroker/node_modules/iobroker.deconz, node: v12.20.0, js-controller: 3.1.6