Neuer ioBroker-Blog online: Monatsrückblick März/April 2026

[rasen1992]

Hallo zusammen,

eine Frage ich habe mir einen 2. Gtag besorgt für die Anwesenheitserkennung, ein Gtag funktioniert einwandfrei, der 2. bleibt aber immer als anwesend markiert...
Benutze das interne Bluetooth, error Meldungen bekomme ich in den Logs keine muss ich hier zusätzlich irgendwas einstellen ? Habe alle Einstellungen Standard belassen nur unten die Bluetooth Mac eingetragen

radar2.0	2020-10-29 13:33:18.470	info	(22792) debug: started #7 l2ping -c 1 58:9e:c6:20:3b:ac
radar2.0	2020-10-29 13:33:18.447	info	(22792) debug: started #6 hcitool -i hci0 lescan --duplicates
radar2.0	2020-10-29 13:33:18.209	info	(22792) debug: started #5 hciconfig hci0 up
radar2.0	2020-10-29 13:33:18.091	info	(22792) debug: started #4 hciconfig hci0 down
radar2.0	2020-10-29 13:33:18.089	info	(22792) radar2 set use of noble(false), doArp("-lgq --retry=5 --timeout=400" on eth0,wlan0), btid(-1) and doUwz(UWZAT01631,120,0,de,true).
radar2.0	2020-10-29 13:33:18.088	info	(22792) radar2 found 2 devices in config (Gigaset_G-tag,G-Tag_Lisa) and 1 enabled.
radar2.0	2020-10-29 13:33:18.085	info	(22792) debug: ChangeState ack:false of radar2.0._UWZ = No warnings
radar2.0	2020-10-29 13:33:18.081	info	(22792) debug: created State radar2.0._UWZ
radar2.0	2020-10-29 13:33:18.075	info	(22792) UWZ found the following (changed) warnings: No warnings
radar2.0	2020-10-29 13:33:17.971	info	(22792) will scan UWZ with code UWZAT01631 every 120 minutes
radar2.0	2020-10-29 13:33:17.844	info	bts norm: (58:9e:c6:20:3b:ac)
radar2.0	2020-10-29 13:33:17.844	info	bts LE: (58:9e:c6:20:3e:24,58:9e:c6:20:3b:ac),
radar2.0	2020-10-29 13:33:17.844	info	ips: (),
radar2.0	2020-10-29 13:33:17.844	info	(22792) Adapter identified macs: (),
radar2.0	2020-10-29 13:33:17.843	info	(22792) Init item G-Tag_Lisa with {name: 'G-Tag_Lisa',ip: [],bluetooth: [ '58:9e:c6:20:3b:ac' ],id: 'G-Tag_Lisa',type: 'BT',btVendor: 'Gigaset Communications GmbH',lasthere: '2020-10-29T13:33:01.235Z
radar2.0	2020-10-29 13:33:17.835	info	(22792) debug: ChangeState ack:false of radar2.0.G-Tag_Lisa._lastHere = 2020-10-29@13:33:01
radar2.0	2020-10-29 13:33:17.830	info	(22792) debug: created State radar2.0.G-Tag_Lisa._lastHere
radar2.0	2020-10-29 13:33:17.821	info	(22792) Init item Gigaset_G-tag with {name: 'Gigaset_G-tag',ip: [],bluetooth: [ '!58:9e:c6:20:3e:24' ],enabled: -1,id: 'Gigaset_G-tag',type: 'BT',btVendor: 'Gigaset Communications GmbH',lasthere: '20
radar2.0	2020-10-29 13:33:17.812	info	(22792) debug: ChangeState ack:false of radar2.0.Gigaset_G-tag._lastHere = 2020-10-29@13:33:01
radar2.0	2020-10-29 13:33:17.806	info	(22792) debug: created State radar2.0.Gigaset_G-tag._lastHere
radar2.0	2020-10-29 13:33:17.782	info	(22792) Will try to scan BT devices: hci0 DC:A6:32:86:F8:6B
radar2.0	2020-10-29 13:33:17.722	info	(22792) debug: Will 'not save' unknown BT devices and will 'save' unknown IP devices!
radar2.0	2020-10-29 13:33:17.721	info	(22792) debug: radar2 set to scan every 15 seconds and printers every 720 minutes.
radar2.0	2020-10-29 13:33:17.030	info	(22792) debug: ChangeState ack:false of radar2.0.info.connection = true
radar2.0	2020-10-29 13:33:17.017	info	(22792) debug: created State radar2.0.info.connection
radar2.0	2020-10-29 13:33:16.022	info	(22792) Connected with '0.0.0.0' for DHCP Scan
radar2.0	2020-10-29 13:33:16.005	info	(22792) arp-scan will use the following interfaces: [ 'eth0', 'wlan0' ]
radar2.0	2020-10-29 13:33:16.004	info	(22792) debug: use known IP list: [ '1.1.1.1' ]
radar2.0	2020-10-29 13:33:16.004	info	(22792) debug: use known BT list: [ '01:12:23:34:45:56' ]
radar2.0	2020-10-29 13:33:16.001	info	(22792) debug: radar2 set to flag items away if they are not seen for 2 minutes
radar2.0	2020-10-29 13:33:15.743	info	(22792) debug: started #3 hciconfig hci0 up
radar2.0	2020-10-29 13:33:15.621	info	(22792) debug: started #2 hciconfig hci0 down
radar2.0	2020-10-29 13:33:15.609	info	(22792) Will run hcitool-mode and not noble on device [ [Object] ]!
radar2.0	2020-10-29 13:33:15.581	info	(22792) debug: started #1 hcitool dev
radar2.0	2020-10-29 13:33:15.553	info	(22792) Will use l2Ping for BT scans.
radar2.0	2020-10-29 13:33:15.539	info	(22792) radar2 initialization started...
radar2.0	2020-10-29 13:33:15.537	info	(22792) debug: radar2 received 20 objects and 19 states, with config devices,scandelay,arp_scan_cmd,btadapterid,printerdelay,removeEnd,knownIPs,knownBTs,external,delayaway,delayuwz,numuwz,longuwz,deb
radar2.0	2020-10-29 13:33:15.449	info	(22792) starting. Version 2.0.1 in /opt/iobroker/node_modules/iobroker.radar2, node: v12.19.0, js-controller: 3.1.6
radar2.0	2020-10-29 13:33:15.226	debug	(22792) statesDB connected
radar2.0	2020-10-29 13:33:15.225	debug	(22792) States connected to redis: 127.0.0.1:9000
radar2.0	2020-10-29 13:33:15.216	debug	(22792) States create System PubSub Client
radar2.0	2020-10-29 13:33:15.213	debug	(22792) States create User PubSub Client
radar2.0	2020-10-29 13:33:15.206	debug	(22792) Redis States: Use Redis connection: 127.0.0.1:9000
radar2.0	2020-10-29 13:33:15.204	debug	(22792) objectDB connected
radar2.0	2020-10-29 13:33:15.197	debug	(22792) Objects connected to redis: 127.0.0.1:9001
radar2.0	2020-10-29 13:33:15.170	debug	(22792) Objects client initialize lua scripts
radar2.0	2020-10-29 13:33:15.169	debug	(22792) Objects create User PubSub Client
radar2.0	2020-10-29 13:33:15.167	debug	(22792) Objects create System PubSub Client
radar2.0	2020-10-29 13:33:15.163	debug	(22792) Objects client ready ... initialize now
radar2.0	2020-10-29 13:33:15.124	debug	(22792) Redis Objects: Use Redis connection: 127.0.0.1:9001

Danke!