NEWS
ble adapter auf gelb, einbinden xiaomi sensor
-
Hallo,
ich habe nach diesem Video versucht den bluetooth adapter einzubinden. Die entsprechenden Treiber wurden mit
sudo apt-get install bluetooth bluez libbluetooth-dev libudev-dev libcap2-bin
installiert. In der Konfiguration habe ich xiaomi eingetragen. hci0 scheint auch korrekt. Bluetooth Status scheint auch ok. Trotzdem geht die Instanz nur auf gelb. Kann mir noch jemand einen Tipp geben, woran es liegen könnte?
simon@debian-simon:~$ sudo service bluetooth status bluetooth.service - Bluetooth service Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled; vendor preset: enabled) Active: active (running) since Thu 2020-01-23 08:25:05 CET; 13min ago Docs: man:bluetoothd(8) Main PID: 4663 (bluetoothd) Status: "Running" Tasks: 1 (limit: 4915) Memory: 2.4M CGroup: /system.slice/bluetooth.service └─4663 /usr/lib/bluetooth/bluetoothd Jan 23 08:25:05 debian-simon systemd[1]: Starting Bluetooth service... Jan 23 08:25:05 debian-simon bluetoothd[4663]: Bluetooth daemon 5.50 Jan 23 08:25:05 debian-simon systemd[1]: Started Bluetooth service. Jan 23 08:25:05 debian-simon bluetoothd[4663]: Starting SDP server Jan 23 08:25:05 debian-simon bluetoothd[4663]: Bluetooth management interface 1.14 initialized
simon@debian-simon:~$ sudo hciconfig hci0: Type: Primary Bus: USB BD Address: 00:1A:7D:DA:71:11 ACL MTU: 679:9 SCO MTU: 48:16 DOWN RX bytes:574 acl:0 sco:0 events:30 errors:0 TX bytes:368 acl:0 sco:0 commands:30 errors:0
Kleine Ergänzung, was nicht funktioniert:
simon@debian-simon:~$ sudo hcitool scan Device is not available: No such device simon@debian-simon:~$ sudo hcitool lescan Could not open device: No such device simon@debian-simon:~$ sudo bluetoothctl Agent registered [bluetooth]# scan on No default controller available [bluetooth]#
-
@godlich2019 Schau mal hier, da scheint deine Hardware-Konfiguration nicht zu stimmen.
https://wiki.fhem.de/wiki/Raspberry_Pi_3:_GPIO-Port_Module_und_Bluetooth --> Schritte 1 bis 5