Neuer ioBroker-Blog online: Monatsrückblick März/April 2026

[arteck]

@jwedenig gaaaaannz ruhig...

wo versuchst du gerade zu installieren Hardware ??.. und welches Betriebssystem ??

[jwedenig]

@arteck
Pi Version 3
2019-07-10-raspbian-buster

Hoffe, dass meintest du

[arteck]

@jwedenig so bei buster kannst du kein node 8 installieren

also

curl -sL https://deb.nodesource.com/setup_10.x | sudo -E bash -

dann

sudo apt install -y nodejs

wenn fertig zeigen

node -v
npm -v

[jwedenig]

@arteck said in Beim Installieren von Zigbee Adapter abgestürzt!!!:

sudo apt install -y nodejs

root@raspberrypi:~# node -v
v10.16.3
root@raspberrypi:~# npm -v
6.9.0
root@raspberrypi:~# 

[jwedenig]

jetzt habe ich npm installiert dank Dir!
und wie bekomm ich noch den iobroker installiert?
Danke schon mal!

[arteck]

@jwedenig einz nach dem anderen

sudo apt-get install -y build-essential libavahi-compat-libdnssd-dev libudev-dev libpam0g-dev nodejs

cd /opt

curl -sL https://iobroker.net/install.sh | bash -

[jwedenig]

root@raspberrypi:~# cd /opt
root@raspberrypi:/opt# curl -sL https://iobroker.net/install.sh | bash -

==========================================================================

    Welcome to the ioBroker installer!
    Installer version: 2019-07-21
    
    You might need to enter your password a couple of times.

==========================================================================


==========================================================================
    Installing prerequisites (1/4)
==========================================================================


==========================================================================
    Creating ioBroker user and directory (2/4)
==========================================================================

Created /etc/sudoers.d/iobroker
Directory /opt/iobroker created

==========================================================================
    Installing ioBroker (3/4)
==========================================================================

In file included from ../src/main.cpp:3:
../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:
../../nan/nan.h:2298:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka void (*)(uv_work_s*, int)’} [-Wcast-function-type]
     , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete)
                                                              ^
In file included from ../../nan/nan.h:54,
                 from ../src/main.cpp:3:
../src/main.cpp: At global scope:
/root/.node-gyp/10.16.3/include/node/node.h:573:43: warning: cast between incompatible function types from ‘void (*)(v8::Local<v8::Object>)’ to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type]
       (node::addon_register_func) (regfunc),                          \
                                           ^
/root/.node-gyp/10.16.3/include/node/node.h:607:3: note: in expansion of macro NODE_MODULE_X’
   NODE_MODULE_X(modname, regfunc, NULL, 0)  // NOLINT (readability/null_usage)
   ^~~~~~~~~~~~~
../src/main.cpp:42:1: note: in expansion of macro ‘NODE_MODULE’
 NODE_MODULE(diskusage, Init)
 ^~~~~~~~~~~
In file included from /root/.node-gyp/10.16.3/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/main.cpp:3:
/root/.node-gyp/10.16.3/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = node::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)]’:
/root/.node-gyp/10.16.3/include/node/node_object_wrap.h:84:78:   required from here
/root/.node-gyp/10.16.3/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<node::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type]
                reinterpret_cast<Callback>(callback), type);
                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/root/.node-gyp/10.16.3/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = Nan::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)]’:
../../nan/nan_object_wrap.h:65:61:   required from here
/root/.node-gyp/10.16.3/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<Nan::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type]
In file included from ../src/./serialport.h:6,
                 from ../src/serialport.cpp:1:
../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:
../../nan/nan.h:2298:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka void (*)(uv_work_s*, int)’} [-Wcast-function-type]
     , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete)
                                                              ^
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:41:49: warning: ‘v8::String::Utf8Value::Utf8Value(v8::Local<v8::Value>)’ is deprecated: Use Isolate version [-Wdeprecated-declarations]
   v8::String::Utf8Value path(info[0]->ToString());
                                                 ^
In file included from /root/.node-gyp/10.16.3/include/node/v8.h:26,
                 from /root/.node-gyp/10.16.3/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/./serialport.h:6,
                 from ../src/serialport.cpp:1:
/root/.node-gyp/10.16.3/include/node/v8.h:2892:28: note: declared here
                   explicit Utf8Value(Local<v8::Value> obj));
                            ^~~~~~~~~
/root/.node-gyp/10.16.3/include/node/v8config.h:324:3: note: in definition of macro ‘V8_DEPRECATED’
   declarator __attribute__((deprecated(message)))
   ^~~~~~~~~~
../src/serialport.cpp:48:53: warning: ‘v8::Local<v8::Object> v8::Value::ToObject() const’ is deprecated: Use maybe version [-Wdeprecated-declarations]
   v8::Local<v8::Object> options = info[1]->ToObject();
                                                     ^
In file included from /root/.node-gyp/10.16.3/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/./serialport.h:6,
                 from ../src/serialport.cpp:1:
/root/.node-gyp/10.16.3/include/node/v8.h:10046:15: note: declared here
 Local<Object> Value::ToObject() const {
               ^~~~~
../src/serialport.cpp:78:69: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen);
                                                                     ^~~~~~~~~~~~~
../src/serialport.cpp: In function ‘void EIO_AfterOpen(uv_work_t*)’:
../src/serialport.cpp:95:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations]
   data->callback.Call(2, argv);
                              ^
In file included from ../src/./serialport.h:6,
                 from ../src/serialport.cpp:1:
../../nan/nan.h:1740:3: note: declared here
   Call(int argc, v8::Local<v8::Value> argv[]) const {
   ^~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:113:53: warning: ‘v8::Local<v8::Object> v8::Value::ToObject() const’ is deprecated: Use maybe version [-Wdeprecated-declarations]
   v8::Local<v8::Object> options = info[1]->ToObject();
                                                     ^
In file included from /root/.node-gyp/10.16.3/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/./serialport.h:6,
                 from ../src/serialport.cpp:1:
/root/.node-gyp/10.16.3/include/node/v8.h:10046:15: note: declared here
 Local<Object> Value::ToObject() const {
               ^~~~~
../src/serialport.cpp:135:71: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate);
                                                                       ^~~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘void EIO_AfterUpdate(uv_work_t*)’:
../src/serialport.cpp:150:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations]
   data->callback.Call(1, argv);
                              ^
In file included from ../src/./serialport.h:6,
                 from ../src/serialport.cpp:1:
../../nan/nan.h:1740:3: note: declared here
   Call(int argc, v8::Local<v8::Value> argv[]) const {
   ^~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:175:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose);
                                                                      ^~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘void EIO_AfterClose(uv_work_t*)’:
../src/serialport.cpp:188:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations]
   data->callback.Call(1, argv);
                              ^
In file included from ../src/./serialport.h:6,
                 from ../src/serialport.cpp:1:
../../nan/nan.h:1740:3: note: declared here
   Call(int argc, v8::Local<v8::Value> argv[]) const {
   ^~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:215:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush);
                                                                      ^~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘void EIO_AfterFlush(uv_work_t*)’:
../src/serialport.cpp:231:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations]
   data->callback.Call(1, argv);
                              ^
In file included from ../src/./serialport.h:6,
                 from ../src/serialport.cpp:1:
../../nan/nan.h:1740:3: note: declared here
   Call(int argc, v8::Local<v8::Value> argv[]) const {
   ^~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:250:53: warning: ‘v8::Local<v8::Object> v8::Value::ToObject() const’ is deprecated: Use maybe version [-Wdeprecated-declarations]
   v8::Local<v8::Object> options = info[1]->ToObject();
                                                     ^
In file included from /root/.node-gyp/10.16.3/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/./serialport.h:6,
                 from ../src/serialport.cpp:1:
/root/.node-gyp/10.16.3/include/node/v8.h:10046:15: note: declared here
 Local<Object> Value::ToObject() const {
               ^~~~~
../src/serialport.cpp:270:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSe);
                                                                    ^~~~~~~~~~~
../src/serialport.cpp: In function ‘void EIO_AfterSet(uv_work_t*)’:
../src/serialport.cpp:285:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations]
   data->callback.Call(1, argv);
                              ^
In file included from ../src/./serialport.h:6,
                 from ../src/serialport.cpp:1:
../../nan/nan.h:1740:3: note: declared here
   Call(int argc, v8::Local<v8::Value> argv[]) const {
   ^~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:314:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGe);
                                                                    ^~~~~~~~~~~
../src/serialport.cpp: In function ‘void EIO_AfterGet(uv_work_t*)’:
../src/serialport.cpp:336:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations]
   data->callback.Call(2, argv);
                              ^
In file included from ../src/./serialport.h:6,
                 from ../src/serialport.cpp:1:
../../nan/nan.h:1740:3: note: declared here
   Call(int argc, v8::Local<v8::Value> argv[]) const {
   ^~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:363:76: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate);
                                                                            ^~~~~~~~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘void EIO_AfterGetBaudRate(uv_work_t*)’:
../src/serialport.cpp:383:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations]
   data->callback.Call(2, argv);
                              ^
In file included from ../src/./serialport.h:6,
                 from ../src/serialport.cpp:1:
../../nan/nan.h:1740:3: note: declared here
   Call(int argc, v8::Local<v8::Value> argv[]) const {
   ^~~~
../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)’:
../src/serialport.cpp:409:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
   uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain);
                                                                      ^~~~~~~~~~~~~~
../src/serialport.cpp: In function ‘void EIO_AfterDrain(uv_work_t*)’:
../src/serialport.cpp:424:30: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations]
   data->callback.Call(1, argv);
                              ^
In file included from ../src/./serialport.h:6,
                 from ../src/serialport.cpp:1:
../../nan/nan.h:1740:3: note: declared here
   Call(int argc, v8::Local<v8::Value> argv[]) const {
   ^~~~
../src/serialport.cpp: At global scope:
../src/serialport.cpp:430:28: warning: unnecessary parentheses in declaration of ‘ToParityEnum’ [-Wparentheses]
 SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local<v8::String>& v8str)) {
                            ^
../src/serialport.cpp:449:30: warning: unnecessary parentheses in declaration of ‘ToStopBitEnum’ [-Wparentheses]
 SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) {
                              ^
In file included from ../../nan/nan.h:54,
                 from ../src/./serialport.h:6,
                 from ../src/serialport.cpp:1:
/root/.node-gyp/10.16.3/include/node/node.h:573:43: warning: cast between incompatible function types from ‘void (*)(v8::Handle<v8::Object>)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type]
       (node::addon_register_func) (regfunc),                          \
                                           ^
/root/.node-gyp/10.16.3/include/node/node.h:607:3: note: in expansion of macro NODE_MODULE_X’
   NODE_MODULE_X(modname, regfunc, NULL, 0)  // NOLINT (readability/null_usage)
   ^~~~~~~~~~~~~
../src/serialport.cpp:485:1: note: in expansion of macro ‘NODE_MODULE’
 NODE_MODULE(serialport, init);
 ^~~~~~~~~~~
In file included from /root/.node-gyp/10.16.3/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/./serialport.h:6,
                 from ../src/serialport.cpp:1:
/root/.node-gyp/10.16.3/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = node::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)]’:
/root/.node-gyp/10.16.3/include/node/node_object_wrap.h:84:78:   required from here
/root/.node-gyp/10.16.3/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<node::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type]
                reinterpret_cast<Callback>(callback), type);
                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/root/.node-gyp/10.16.3/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = Nan::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)]’:
../../nan/nan_object_wrap.h:65:61:   required from here
/root/.node-gyp/10.16.3/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<Nan::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type]
In file included from ../src/serialport.h:6,
                 from ../src/serialport_unix.cpp:2:
../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:
../../nan/nan.h:2298:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka void (*)(uv_work_s*, int)’} [-Wcast-function-type]
     , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete)
                                                              ^
In file included from /root/.node-gyp/10.16.3/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/serialport.h:6,
                 from ../src/serialport_unix.cpp:2:
/root/.node-gyp/10.16.3/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = node::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)]’:
/root/.node-gyp/10.16.3/include/node/node_object_wrap.h:84:78:   required from here
/root/.node-gyp/10.16.3/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<node::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type]
                reinterpret_cast<Callback>(callback), type);
                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/root/.node-gyp/10.16.3/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = Nan::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)]’:
../../nan/nan_object_wrap.h:65:61:   required from here
/root/.node-gyp/10.16.3/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<Nan::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type]
../src/serialport_unix.cpp: In function ‘int setup(int, OpenBaton*)’:
../src/serialport_unix.cpp:176:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1005 [-Wformat-truncation=]
     snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path);
                                                            ^~~~~~~~~~~~~~~~~~~~~~~~~
../src/serialport_unix.cpp:176:13: note: ‘snprintf’ output 20 or more bytes (assuming 1043) into a destination of size 1024
     snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path);
     ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../src/serialport_unix.cpp: In function ‘void EIO_Open(uv_work_t*)’:
../src/serialport_unix.cpp:86:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1003 [-Wformat-truncation=]
     snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path);
                                                            ^~~~~~~~~~~~~~~~~~~~~~~~~~~
../src/serialport_unix.cpp:86:13: note: ‘snprintf’ output 22 or more bytes (assuming 1045) into a destination of size 1024
     snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path);
     ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from ../src/poller.cpp:1:
../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’:
../../nan/nan.h:2298:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka void (*)(uv_work_s*, int)’} [-Wcast-function-type]
     , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete)
                                                              ^
../src/poller.cpp: In static member function ‘static void Poller::onData(uv_poll_t*, int, int)’:
../src/poller.cpp:69:29: warning: ‘v8::Local<v8::Value> Nan::Callback::Call(int, v8::Local<v8::Value>*) const’ is deprecated [-Wdeprecated-declarations]
   obj->callback.Call(2, argv);
                             ^
In file included from ../src/poller.cpp:1:
../../nan/nan.h:1740:3: note: declared here
   Call(int argc, v8::Local<v8::Value> argv[]) const {
   ^~~~
In file included from /root/.node-gyp/10.16.3/include/node/node.h:63,
                 from ../../nan/nan.h:54,
                 from ../src/poller.cpp:1:
/root/.node-gyp/10.16.3/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = node::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)]’:
/root/.node-gyp/10.16.3/include/node/node_object_wrap.h:84:78:   required from here
/root/.node-gyp/10.16.3/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<node::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<node::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type]
                reinterpret_cast<Callback>(callback), type);
                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/root/.node-gyp/10.16.3/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = Nan::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)]’:
../../nan/nan_object_wrap.h:65:61:   required from here
/root/.node-gyp/10.16.3/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<Nan::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type]

==========================================================================
    Finalizing installation (4/4)
==========================================================================

Enabling autostart...
Autostart enabled!
Fixing directory permissions...

==========================================================================

    ioBroker was installed successfully
    Open http://192.168.1.232:8081 in a browser and start configuring!

==========================================================================


You need to re-login before doing anything else on the console!

root@raspberrypi:/opt# 

[arteck]

@jwedenig sagte in Beim Installieren von Zigbee Adapter abgestürzt!!!:

http://192.168.1.232:8081

so http://192.168.1.232:8081 im Browser

und ??

[jwedenig]

läuft! Vielen lieben Dank!

Trotz allen Anleitungen schaffe ich es leider nie alleine, verschiedene Versionen, veraltete Anleitungen!
Ich glaube eine Anleitung die immer 100% funktioniert gibt es nicht oder täusche ich mich da?
Dieses Forum ist super dafür!
Herzlichen Dank!"

[arteck]

@jwedenig die Systeme sind nicht alle gleich und eine software hat ja auch ein lebeszyklus.. und wir kommen nicht mit der Doku nach...

schön das es läuft

[jwedenig]

@arteck
Danke Danke Danke!!!!

[AlCalzone]

@arteck

FYI:

sudo apt-get install -y build-essential libavahi-compat-libdnssd-dev libudev-dev libpam0g-dev nodejs

Das meiste davon installiert der Installer bereits selbst.
https://github.com/ioBroker/ioBroker/blob/master/installer.sh#L498
Nodejs kommt in der nächsten Version.

cd /opt

Unnötig

[arteck]

@AlCalzone im Eifer des Gefächts... jo und jo.... und jo..

[jwedenig]

ich hätte jetzt noch eine Frage:
Da mir ja gestern die SD Karte abgeschmiert ist und ich mir die ganze Neuinstallationsprozedur ersparen möchte, gibt es ein Programm für den Mac, um die Karte zu klonen?
Ich habe schon einiges gesucht, aber keine 100% Lösung gefunden!
Danke im voraus
Jürgen

[Asgothian]

@jwedenig du solltest in der Lage sein die Karte direkt mit den diskutilities von macOS zu clonen

[jwedenig]

alles klar, werde ich versuchen!
D.H klonen und wenn ich die 2te SD Karte in den Pi stecke, dann ist alles beim Alten?!

[arteck]

@jwedenig

https://forum.iobroker.net/topic/25450/livestream-backup-restore-einer-sd-karte