Uninstall - install problem

derAuge

Es hat sich irgendwas verhackt. Da hilft nur reboot.

Es gibt 0.6.3, wo update wieder funktionieren soll. `

Was ist nun zu tun?

root@pi2:/mnt/ioBroker/iobroker# iobroker restart

module.js:340
    throw err;
          ^
Error: Cannot find module '/mnt/ioBroker/iobroker.Pi2/node_modules/iobroker.js-controller/iobroker.js'
    at Function.Module._resolveFilename (module.js:338:15)
    at Function.Module._load (module.js:280:25)
    at Function.Module.runMain (module.js:497:10)
    at startup (node.js:119:16)
    at node.js:935:3
root@pi2:/mnt/ioBroker/iobroker#

Bluefox

cd /mnt/ioBroker/iobroker.Pi2/
npm install iobroker.js-controller
./iobroker start

Bluefox

~~@starfish:~~

kann ich bestätigen
> in den rechten Spalten wechselt es dauern von rot nach grün :(
wie auch die Logeinträge sehen bei mir gleich aus. `
Reboot

Homoran

Auch bei controller 0.6.3 und neuem admin bleibt es dabei, dass bei einem ./iobroker restart einzelne Adapter nicht beendet werden (erst mal nur node-red und hmm) und nach dem restart doppelt laufen.

Dadurch kommt es andauernd zu terminating code 7

Nach reboot ist gut!

Gesendet von meinem LIFETAB_S785X mit Tapatalk

derAuge

:(

INSTALL lief durch

root@pi2:/mnt/ioBroker/iobroker# npm install iobroker.js-controller

> ws@0.5.0 install /mnt/ioBroker/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io/node_m                                           odules/engine.io/node_modules/ws
> (node-gyp rebuild 2> builderror.log) || (exit 0)

make: Entering directory '/mnt/ioBroker/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io                                           /node_modules/engine.io/node_modules/ws/build'
  CXX(target) Release/obj.target/bufferutil/src/bufferutil.o
  SOLINK_MODULE(target) Release/obj.target/bufferutil.node
  SOLINK_MODULE(target) Release/obj.target/bufferutil.node: Finished
  COPY Release/bufferutil.node
  CXX(target) Release/obj.target/validation/src/validation.o
  SOLINK_MODULE(target) Release/obj.target/validation.node
  SOLINK_MODULE(target) Release/obj.target/validation.node: Finished
  COPY Release/validation.node
make: Leaving directory '/mnt/ioBroker/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io/                                           node_modules/engine.io/node_modules/ws/build'

> ws@0.4.31 install /mnt/ioBroker/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-clien                                           t/node_modules/engine.io-client/node_modules/ws
> (node-gyp rebuild 2> builderror.log) || (exit 0)

make: Entering directory '/mnt/ioBroker/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io                                           -client/node_modules/engine.io-client/node_modules/ws/build'
  CXX(target) Release/obj.target/bufferutil/src/bufferutil.o
  SOLINK_MODULE(target) Release/obj.target/bufferutil.node
  SOLINK_MODULE(target) Release/obj.target/bufferutil.node: Finished
  COPY Release/bufferutil.node
  CXX(target) Release/obj.target/validation/src/validation.o
  SOLINK_MODULE(target) Release/obj.target/validation.node
  SOLINK_MODULE(target) Release/obj.target/validation.node: Finished
  COPY Release/validation.node
make: Leaving directory '/mnt/ioBroker/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-cl           ient/node_modules/ws/build'

> iobroker.js-controller@0.6.3 install /mnt/ioBroker/iobroker/node_modules/iobroker.js-controller
> node lib/setup.js setup first

iobroker.js-controller@0.6.3 node_modules/iobroker.js-controller
├── mime@1.3.4
├── daemonize2@0.4.2
├── node-schedule@0.1.13
├── ncp@2.0.0
├── adm-zip@0.4.7
├── node.extend@1.1.3 (is@2.1.0)
├── yargs@3.7.2 (camelcase@1.0.2, decamelize@1.0.0, window-size@0.1.0, wordwrap@0.0.2)
├── winston@1.0.0 (cycle@1.0.3, stack-trace@0.0.9, eyes@0.1.8, isstream@0.1.2, pkginfo@0.3.0, async@0.9.0, colors@1.0.3)
├── tar.gz@0.1.1 (commander@1.1.1, tar@0.1.20, fstream@0.1.31)
├── request@2.55.0 (caseless@0.9.0, json-stringify-safe@5.0.0, aws-sign2@0.5.0, forever-agent@0.6.1, stringstream@0.0.4, tunnel-agent@0.4.0, oauth-sign@0.6.0, isstream@0.1.2, node-uuid@1.4.3, qs@2.4.1, combined-stream@0.0.7, form-data@0.2.0, mime-types@2.0.10, http-signature@0.10.1, bl@0.9.4, tough-cookie@0.12.1, hawk@2.3.1, har-validator@1.6.1)
├── socket.io@1.3.5 (debug@2.1.0, has-binary-data@0.1.3, socket.io-adapter@0.3.1, socket.io-parser@2.2.4, engine.io@1.5.1)
├── socket.io-client@1.3.5 (to-array@0.1.3, indexof@0.0.1, component-bind@1.0.0, debug@0.7.4, object-component@0.0.3, backo2@1.0.2, component-emitter@1.1.2, has-binary@0.1.6, parseuri@0.0.2, socket.io-parser@2.2.4, engine.io-client@1.5.1)
└── npm@2.7.6
root@pi2:/mnt/ioBroker/iobroker#

Jedoch ist etwas mit dem symLink

root@pi2:/mnt/ioBroker/iobroker# iobroker start

module.js:340
    throw err;
          ^
Error: Cannot find module '/mnt/ioBroker/iobroker.Pi2/node_modules/iobroker.js-controller/iobroker.js'
    at Function.Module._resolveFilename (module.js:338:15)
    at Function.Module._load (module.js:280:25)
    at Function.Module.runMain (module.js:497:10)
    at startup (node.js:119:16)
    at node.js:935:3

so startet der controler

root@pi2:/mnt/ioBroker/iobroker# ./iobroker start
Starting ioBroker controller daemon...
ioBroker controller daemon started. PID: 2821
root@pi2:/mnt/ioBroker/iobroker#

aber Admin wird nicht gestartet

root@pi2:/mnt/ioBroker/iobroker# ps -A |grep io
   10 ?        00:00:00 migration/0
   11 ?        00:00:00 migration/1
   15 ?        00:00:00 migration/2
   19 ?        00:00:00 migration/3
   30 ?        00:00:00 bioset
   33 ?        00:00:00 rpciod
   37 ?        00:00:00 nfsiod
   49 ?        00:00:00 DWC Notificatio
 2821 ?        00:00:03 io.js-controlle
root@pi2:/mnt/ioBroker/iobroker#

Bluefox

~~@derAuge:~~

:(

INSTALL lief durch

root@pi2:/mnt/ioBroker/iobroker# npm install iobroker.js-controller

> ws@0.5.0 install /mnt/ioBroker/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io/node_m                                           odules/engine.io/node_modules/ws
> (node-gyp rebuild 2> builderror.log) || (exit 0)

make: Entering directory '/mnt/ioBroker/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io                                           /node_modules/engine.io/node_modules/ws/build'
  CXX(target) Release/obj.target/bufferutil/src/bufferutil.o
  SOLINK_MODULE(target) Release/obj.target/bufferutil.node
  SOLINK_MODULE(target) Release/obj.target/bufferutil.node: Finished
  COPY Release/bufferutil.node
  CXX(target) Release/obj.target/validation/src/validation.o
  SOLINK_MODULE(target) Release/obj.target/validation.node
  SOLINK_MODULE(target) Release/obj.target/validation.node: Finished
  COPY Release/validation.node
make: Leaving directory '/mnt/ioBroker/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io/                                           node_modules/engine.io/node_modules/ws/build'

> ws@0.4.31 install /mnt/ioBroker/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-clien                                           t/node_modules/engine.io-client/node_modules/ws
> (node-gyp rebuild 2> builderror.log) || (exit 0)

make: Entering directory '/mnt/ioBroker/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io                                           -client/node_modules/engine.io-client/node_modules/ws/build'
  CXX(target) Release/obj.target/bufferutil/src/bufferutil.o
  SOLINK_MODULE(target) Release/obj.target/bufferutil.node
  SOLINK_MODULE(target) Release/obj.target/bufferutil.node: Finished
  COPY Release/bufferutil.node
  CXX(target) Release/obj.target/validation/src/validation.o
  SOLINK_MODULE(target) Release/obj.target/validation.node
  SOLINK_MODULE(target) Release/obj.target/validation.node: Finished
  COPY Release/validation.node
make: Leaving directory '/mnt/ioBroker/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-cl           ient/node_modules/ws/build'

> iobroker.js-controller@0.6.3 install /mnt/ioBroker/iobroker/node_modules/iobroker.js-controller
> node lib/setup.js setup first

iobroker.js-controller@0.6.3 node_modules/iobroker.js-controller
├── mime@1.3.4
├── daemonize2@0.4.2
├── node-schedule@0.1.13
├── ncp@2.0.0
├── adm-zip@0.4.7
├── node.extend@1.1.3 (is@2.1.0)
├── yargs@3.7.2 (camelcase@1.0.2, decamelize@1.0.0, window-size@0.1.0, wordwrap@0.0.2)
├── winston@1.0.0 (cycle@1.0.3, stack-trace@0.0.9, eyes@0.1.8, isstream@0.1.2, pkginfo@0.3.0, async@0.9.0, colors@1.0.3)
├── tar.gz@0.1.1 (commander@1.1.1, tar@0.1.20, fstream@0.1.31)
├── request@2.55.0 (caseless@0.9.0, json-stringify-safe@5.0.0, aws-sign2@0.5.0, forever-agent@0.6.1, stringstream@0.0.4, tunnel-agent@0.4.0, oauth-sign@0.6.0, isstream@0.1.2, node-uuid@1.4.3, qs@2.4.1, combined-stream@0.0.7, form-data@0.2.0, mime-types@2.0.10, http-signature@0.10.1, bl@0.9.4, tough-cookie@0.12.1, hawk@2.3.1, har-validator@1.6.1)
├── socket.io@1.3.5 (debug@2.1.0, has-binary-data@0.1.3, socket.io-adapter@0.3.1, socket.io-parser@2.2.4, engine.io@1.5.1)
├── socket.io-client@1.3.5 (to-array@0.1.3, indexof@0.0.1, component-bind@1.0.0, debug@0.7.4, object-component@0.0.3, backo2@1.0.2, component-emitter@1.1.2, has-binary@0.1.6, parseuri@0.0.2, socket.io-parser@2.2.4, engine.io-client@1.5.1)
└── npm@2.7.6
root@pi2:/mnt/ioBroker/iobroker#

Jedoch ist etwas mit dem symLink

root@pi2:/mnt/ioBroker/iobroker# iobroker start

module.js:340
    throw err;
          ^
Error: Cannot find module '/mnt/ioBroker/iobroker.Pi2/node_modules/iobroker.js-controller/iobroker.js'
    at Function.Module._resolveFilename (module.js:338:15)
    at Function.Module._load (module.js:280:25)
    at Function.Module.runMain (module.js:497:10)
    at startup (node.js:119:16)
    at node.js:935:3

so startet der controler

root@pi2:/mnt/ioBroker/iobroker# ./iobroker start
Starting ioBroker controller daemon...
ioBroker controller daemon started. PID: 2821
root@pi2:/mnt/ioBroker/iobroker#

aber Admin wird nicht gestartet

root@pi2:/mnt/ioBroker/iobroker# ps -A |grep io
   10 ?        00:00:00 migration/0
   11 ?        00:00:00 migration/1
   15 ?        00:00:00 migration/2
   19 ?        00:00:00 migration/3
   30 ?        00:00:00 bioset
   33 ?        00:00:00 rpciod
   37 ?        00:00:00 nfsiod
   49 ?        00:00:00 DWC Notificatio
 2821 ?        00:00:03 io.js-controlle
root@pi2:/mnt/ioBroker/iobroker#

```` `

Bei dir ist je etwas schiff:

installiert nach: /mnt/ioBroker/iobroker

Gestartet wird aber aus: /mnt/ioBroker/iobroker.Pi2/

derAuge

` > Bei dir ist je etwas schiff:

installiert nach: /mnt/ioBroker/iobroker

Gestartet wird aber aus: /mnt/ioBroker/iobroker.Pi2/ `

Jau …. DANK ;)

mann sollte doch alle Gedanken dabei haben.

Nun läuft es :)

dann mach ich mich mal ans Update der Adapter

derAuge

:) :) :) :) :)
315_iobrokeradmin0.4.1.png

derAuge

und auf 0.4.2

iobroker	2015-04-17 22:40:10	info	exit 8
iobroker	2015-04-17 22:40:10	error	at Timer.listOnTimeout [as ontimeout] (timers.js:112:15)
iobroker	2015-04-17 22:40:10	error	at null._onTimeout (/mnt/ioBroker/iobroker.Pi2/node_modules/iobroker.js-controller/lib/setup.js:1530:27)
iobroker	2015-04-17 22:40:10	error	at new ObjectsInMemServer (/mnt/ioBroker/iobroker.Pi2/node_modules/iobroker.js-controller/lib/objectsInMemServer.js:146:7)
iobroker	2015-04-17 22:40:10	error	at /mnt/ioBroker/iobroker.Pi2/node_modules/iobroker.js-controller/lib/objectsInMemServer.js:139:9
iobroker	2015-04-17 22:40:10	error	at _initWebServer (/mnt/ioBroker/iobroker.Pi2/node_modules/iobroker.js-controller/lib/objectsInMemServer.js:958:24)
iobroker	2015-04-17 22:40:10	error	at Server.listen (net.js:1139:5)
iobroker	2015-04-17 22:40:10	error	at listen (net.js:1065:10)
iobroker	2015-04-17 22:40:10	error	at Server._listen2 (net.js:1043:14)
iobroker	2015-04-17 22:40:10	error	at errnoException (net.js:905:11)
iobroker	2015-04-17 22:40:10	error	Error: listen EADDRINUSE
iobroker	2015-04-17 22:40:10	error	^
iobroker	2015-04-17 22:40:10	error	throw er; // Unhandled 'error' event
iobroker	2015-04-17 22:40:10	error	events.js:72
iobroker	2015-04-17 22:39:58	info	upgrade admin

kann das auch an meiner Installation liegen?

starfish

~~@Homoran:~~

Nach reboot ist gut! `
reboot tut gut - hier auch. Danke.

Homoran

push!

~~@Homoran:~~

Auch bei controller 0.6.3 und neuem admin bleibt es dabei, dass bei einem ./iobroker restart einzelne Adapter nicht beendet werden (erst mal nur node-red und hmm) und nach dem restart doppelt laufen.

Dadurch kommt es andauernd zu terminating code 7

Nach reboot ist gut!

Gesendet von meinem LIFETAB_S785X mit Tapatalk `

akamia

Mit 0.6.4 läuft es perfekt. Keine Fehlermeldungen mehr bei der Installation eines Adapters. Vielen Dank.

Community Forum

NEWS

Uninstall - install problem

Support us

461

33.0k

83.4k

1.3m