Test Adapter shuttercontrol v2.0.x

bishop

naja, dass Problem ist das er jetzt im Manu_mode steht und deshalb der Sonnenschutz nicht aktiviert wird.

Ich bekomme dann immer eine Erinnerung von meiner Frau mit einem Bösen Unterton, warum der Rollladen nicht unten ist :(

Esmax666

Hallo zusammen,

ich habe meinen Raspberry gewechselt und iobroker mit backitup neu installiert. Die Installation verlief gut. Die Einstellungen scheinen gut zu sein, die Rollläden schließen überall gut, aber am Morgen öffnen sich die Rollläden nicht.

Ich habe auch ein Update von shuttercontrol durchgeführt, das 6 Monate alt war. Gibt es einen Parameter, der aktiviert werden kann, damit die Rollläden am Morgen geöffnet werden?
Direkt in Object kann ich als Target value 0 geben un die rollo schliessen (also sollte schon gehen)

habe gearde gesehen das Z ave die befehle früher bekommen hat ... wie ist das möglich ?

als earli time steht 8:00

Esmax666

Ich habe jetzt auch in log das Sunset/surise auch nicht Richtig ist aber laut GPS koordinaten sollte ich eher das haben

https://www.timeanddate.com/astronomy/germany/nuremberg

shuttercontrol.0	2021-06-02 15:25:00.018	debug	(7758) Sun Elevation: 52.4°
shuttercontrol.0	2021-06-02 15:25:00.017	debug	(7758) Sun Azimut: 235.4°
shuttercontrol.0	2021-06-02 15:25:00.016	debug	(7758) calculate astrodata ...
info.0	2021-06-02 15:24:54.402	warn	(2114) State "info.0.uuid" has no existing object, this might lead to an error in future versions
zwave2.0	2021-06-02 15:24:27.193	debug	(4213) Node 3: value updated: airTemperature => 18.14
zwave2.0	2021-06-02 15:24:27.191	debug	(4213) Node 3: metadata updated: airTemperature
zwave2.0	2021-06-02 15:23:51.024	debug	(4213) Node 31: value updated: value_electric_kwh_consumed => 0.12
shuttercontrol.0	2021-06-02 15:22:54.863	debug	(7758) complete down at 22:00
shuttercontrol.0	2021-06-02 15:22:54.859	debug	(7758) Shutdown shutters sleep area: 19:40 debug 7
shuttercontrol.0	2021-06-02 15:22:54.858	debug	(7758) Shutdown shutters children area: 19:00 debug 6
shuttercontrol.0	2021-06-02 15:22:54.854	debug	(7758) shutterDownLiving
shuttercontrol.0	2021-06-02 15:22:54.853	debug	(7758) Shutdown shutters living area: 19:40 debug 7
shuttercontrol.0	2021-06-02 15:22:54.853	debug	(7758) yes, IsEarlier : 19:40 22:00
shuttercontrol.0	2021-06-02 15:22:54.853	debug	(7758) check IsEarlier : 19:40 22:00
shuttercontrol.0	2021-06-02 15:22:54.852	debug	(7758) check IsLater : 19:40 22:00
shuttercontrol.0	2021-06-02 15:22:54.850	debug	(7758) Starting up shutters children area: 08:01 debug 8
shuttercontrol.0	2021-06-02 15:22:54.850	debug	(7758) yes, IsEarlier : 02:48 08:01
shuttercontrol.0	2021-06-02 15:22:54.849	debug	(7758) check IsEarlier : 02:48 08:01
shuttercontrol.0	2021-06-02 15:22:54.849	debug	(7758) check IsEqual : 02:48 09:31
shuttercontrol.0	2021-06-02 15:22:54.849	debug	(7758) check IsEqual : 08:01 09:31
shuttercontrol.0	2021-06-02 15:22:54.848	debug	(7758) check IsLater : 02:48 08:01
shuttercontrol.0	2021-06-02 15:22:54.848	debug	(7758) check IsLater : 02:48 09:31
shuttercontrol.0	2021-06-02 15:22:54.846	debug	(7758) Starting up shutters sleep area: 08:01 debug 8
shuttercontrol.0	2021-06-02 15:22:54.845	debug	(7758) yes, IsEarlier : 02:48 08:01
shuttercontrol.0	2021-06-02 15:22:54.845	debug	(7758) check IsEarlier : 02:48 08:01
shuttercontrol.0	2021-06-02 15:22:54.845	debug	(7758) check IsEqual : 02:48 09:29
shuttercontrol.0	2021-06-02 15:22:54.844	debug	(7758) check IsEqual : 08:01 09:29
shuttercontrol.0	2021-06-02 15:22:54.844	debug	(7758) check IsLater : 02:48 08:01
shuttercontrol.0	2021-06-02 15:22:54.844	debug	(7758) check IsLater : 02:48 09:29
shuttercontrol.0	2021-06-02 15:22:54.841	debug	(7758) Starting up shutters living area: 06:01 debug 8
shuttercontrol.0	2021-06-02 15:22:54.841	debug	(7758) yes, IsEarlier : 02:48 06:01
shuttercontrol.0	2021-06-02 15:22:54.841	debug	(7758) check IsEarlier : 02:48 06:01
shuttercontrol.0	2021-06-02 15:22:54.840	debug	(7758) check IsEqual : 02:48 09:00
shuttercontrol.0	2021-06-02 15:22:54.840	debug	(7758) check IsEqual : 06:01 09:00
shuttercontrol.0	2021-06-02 15:22:54.839	debug	(7758) check IsLater : 02:48 06:01
shuttercontrol.0	2021-06-02 15:22:54.839	debug	(7758) check IsLater : 02:48 09:00
shuttercontrol.0	2021-06-02 15:22:54.824	debug	(7758) Shutdown shutters Sunset area: 19:40
shuttercontrol.0	2021-06-02 15:22:54.823	debug	(7758) Starting up shutters Sunrise area: 02:48
shuttercontrol.0	2021-06-02 15:22:54.823	debug	(7758) Shutdown shutters GoldenHour area: 18:50
shuttercontrol.0	2021-06-02 15:22:54.823	debug	(7758) Starting up shutters GoldenHour area: 03:38
shuttercontrol.0	2021-06-02 15:22:54.822	debug	(7758) Sunset today: 19:15
shuttercontrol.0	2021-06-02 15:22:54.821	debug	(7758) Sunrise today: 03:13
shuttercontrol.0	2021-06-02 15:22:54.821	debug	(7758) current day: 3
shuttercontrol.0	2021-06-02 15:22:54.820	debug	(7758) goldenHour today: 18:25
shuttercontrol.0	2021-06-02 15:22:54.816	debug	(7758) goldenHourEnd today: 04:03
shuttercontrol.0	2021-06-02 15:22:54.815	debug	(7758) calculate astrodata ...
shuttercontrol.0	2021-06-02 15:22:54.811	debug	(7758) shutterDriveCalc

Homoran

@esmax666 sagte in Test Adapter shuttercontrol v1.2.x:

wie ist das möglich ?

wie ist denn die Systemzeit deines ioBroker Servers?

Negalein

@FoxRo @simatec

Ich habe hier eingetragen, dass er bei 25° in den Sonnenschutz fährt.
Funktioniert sehr gut.

Nur fährt er dann wenns wieder kühler ist (zB bei 21°) nicht mehr hoch.

Ist das gewollt, oder hab ich was falsch eingestellt?

instances - ioBroker.png

FoxRo

@simatec said in Test Adapter shuttercontrol v1.2.x:

@strago Ich schaue mir die Logik noch einmal an und werde mal ein paar Debug Logs dazu einbauen ...

Habe bei mir das gleiche Problem festgestellt. Late down schliesst bei mir nicht mehr korrekt resp. nur noch das erste Objekt, die anderen nicht.. Habe deshalb mal den Debugger angeworfen und es sieht danach aus, dass er die Arrays im shutterDownLate.js nicht komplett durcharbeitet, sondern nach dem ersten Element, welches er noch korrekt abarbeitet, danach die Schleife verlässt.
Er verlässt die Schliefe beim "return (shutterSettings);" und kommt nicht mehr zurück, weshalb die anderen LateDown Objekte nicht mehr abgearbeitet werden.
Ich habe bei mir als "super Hack" das return (shutterSettings); nun mal aus kommentiert. Ich denke aber nicht, dass dies die saubere Lösung ist, da ich damit wohl einen Teil vom coolen neuen Feature "Shuttersettings" kappe ... ;-) . Im Debugger arbeitet er nun aber mal alle LateDown Objekte korrekt ab.
Vielleicht hilft Dir dieser Hinweis ein wenig bei der Suche ...

FoxRo

@negalein said in Test Adapter shuttercontrol v1.2.x:

@FoxRo @simatec

Ich habe hier eingetragen, dass er bei 25° in den Sonnenschutz fährt.
Funktioniert sehr gut.

Nur fährt er dann wenns wieder kühler ist (zB bei 21°) nicht mehr hoch.

Ist das gewollt, oder hab ich was falsch eingestellt?

Grundsätzlich sollte er meines Erachtens beim unterschreiten von 23.75°C wieder hoch fahren. Voraussetzung, die Wetterstation liefert diesen Wert :-) Ausnahme ist, wenn Du die Option "Halte Rollladen in Sonnenschutz" aktiviert hast. (Zu finden in den Rolladen Extra Einstellungen)
Viel Erfolg

FoxRo

@bishop said in Test Adapter shuttercontrol v1.2.x:

naja, dass Problem ist das er jetzt im Manu_mode steht und deshalb der Sonnenschutz nicht aktiviert wird.

Ich bekomme dann immer eine Erinnerung von meiner Frau mit einem Bösen Unterton, warum der Rollladen nicht unten ist :(

Das kann ich gut verstehen ;-)
Der Rollo geht in den "Manu_Mode" sobald der Rollo ohne Zutun von Shuttercontrol bewegt wird. Sprich, wenn sich die gemeldete Position des Rollos aus Sicht von Shuttercontrol unerwartet ändert. Das kann also durch ein Taster, ein Script, oder durch Alexa oder ähnliches ausgelöst werden, wenn diese direkt auf den Rollo einwirken.
Es gibt vereinzelte Aktoren, die melden verspätet eine korrigierte angefahrene Position zurück, was auch zu diesem Verhalten führen kann. In diesem Fall empfiehlt es sich die Option "Überprüfen des aktuellen Rollladenstatus" mit dem passenden Delay in den Extra Einstellungen zu benützen.
Viel Erfolg!

Negalein

@foxro sagte in Test Adapter shuttercontrol v1.2.x:

Grundsätzlich sollte er meines Erachtens beim unterschreiten von 23.75°C wieder hoch fahren. Voraussetzung, die Wetterstation liefert diesen Wert Ausnahme ist, wenn Du die Option "Halte Rollladen in Sonnenschutz" aktiviert hast. (Zu finden in den Rolladen Extra Einstellungen)
Viel Erfolg

Danke

Ja, die Wetterstation liefert den korrekten Wert.
"Halte Rollladen in Sonnenschutz" ist nicht aktiv.

Wo kann ich noch ansetzen?

Edit: das sind die Schaltungen von heute.
Um 16:20:01.050 ist Wohnzimmer in den Sonnenschutz gegangen.

2021-06-02 05:39:00.166  - [32minfo[39m: shuttercontrol.0 (31749) #13 Set ID: Rollo Wohnzimmer value: 100%
2021-06-02 05:39:10.200  - [32minfo[39m: shuttercontrol.0 (31749) #13 Set ID: Rollo Schlafzimmer value: 100%
2021-06-02 06:15:00.199  - [32minfo[39m: shuttercontrol.0 (31749) #21 Set ID: Rollo Kinderzimmer value: 100%
2021-06-02 16:20:01.050  - [32minfo[39m: shuttercontrol.0 (31749) Set ID: Rollo Wohnzimmer value: 30%
2021-06-02 16:20:14.904  - [32minfo[39m: shuttercontrol.0 (31749)  Will sunprotect ID: Rollo Schlafzimmer value: 30% after the window has been closed 
2021-06-02 16:20:16.131  - [32minfo[39m: shuttercontrol.0 (31749)  Will sunprotect ID: Rollo Schlafzimmer value: 30% after the window has been closed 
2021-06-02 18:10:16.369  - [32minfo[39m: shuttercontrol.0 (31749)  Will end sunprotect ID: Rollo Schlafzimmer value: 30% after the window has been closed 
2021-06-02 19:00:00.227  - [32minfo[39m: shuttercontrol.0 (31749) #28 Will close ID: Rollo Kinderzimmer value: 0% after the window has been closed 
2021-06-02 19:58:44.458  - [32minfo[39m: shuttercontrol.0 (31749) Window is still closed -> drive to last height: 0% for device: Rollo Kinderzimmer
2021-06-02 21:31:00.094  - [32minfo[39m: shuttercontrol.0 (31749) #12 Set ID: alias.0.Rollos.Rollo_Wohnzimmer Rollo Wohnzimmer value: 0%
2021-06-02 21:31:10.273  - [32minfo[39m: shuttercontrol.0 (31749) #14 Will close ID: Rollo Schlafzimmer value: 0% after the window has been closed

FoxRo

@negalein said in Test Adapter shuttercontrol v1.2.x:

@foxro sagte in Test Adapter shuttercontrol v1.2.x:

Grundsätzlich sollte er meines Erachtens beim unterschreiten von 23.75°C wieder hoch fahren. Voraussetzung, die Wetterstation liefert diesen Wert Ausnahme ist, wenn Du die Option "Halte Rollladen in Sonnenschutz" aktiviert hast. (Zu finden in den Rolladen Extra Einstellungen)
Viel Erfolg

Danke

Ja, die Wetterstation liefert den korrekten Wert.
"Halte Rollladen in Sonnenschutz" ist nicht aktiv.

Wo kann ich noch ansetzen?

Kann es sein, dass mehrere Rollos mit der gleichen Temp konfiguriert sind und somit auch gleichzeitig zusammen hochfahren sollten? evtl, dass aktuell nur einer davon hoch fährt und die anderen nicht?
Wenn dem so ist, kannst mal den versch. Rollos leicht unterschiedliche Temp. konfigurieren, so dass sie nicht gleichzeitig das gleiche Signal bekommen?

Esmax666

@homoran hab jetzt gerade korrigiert, sollte jetzt richtig sein jetzt

ubuntu@ubuntu:~$ timedatectl
               Local time: Wed 2021-06-02 21:28:03 UTC
           Universal time: Wed 2021-06-02 21:28:03 UTC
                 RTC time: n/a
                Time zone: Etc/UTC (UTC, +0000)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

Thomas Braun

@esmax666
Nein, ist es nicht. Oder wohnst du am Null-Meridian?
Ich vermute eher du wohnst in der Zeitzone 'Europa/Berlin'.

sudo timedatectl set-timezone Europe/Berlin

Sollte dann so aussehen:

echad@chet:~ $ timedatectl
               Local time: Mi 2021-06-02 23:41:05 CEST
           Universal time: Mi 2021-06-02 21:41:05 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

Negalein

@foxro sagte in Test Adapter shuttercontrol v1.2.x:

Kann es sein, dass mehrere Rollos mit der gleichen Temp konfiguriert sind und somit auch gleichzeitig zusammen hochfahren sollten? evtl, dass aktuell nur einer davon hoch fährt und die anderen nicht?

so ist es

Wenn dem so ist, kannst mal den versch. Rollos leicht unterschiedliche Temp. konfigurieren, so dass sie nicht gleichzeitig das gleiche Signal bekommen?

mache ich und werde wieder berichten

Esmax666

@thomas-braun said in Test Adapter shuttercontrol v1.2.x:

sudo timedatectl set-timezone Europe/Berlin

sorry copy/paste war nicht richtig:

ich hatte das

ubuntu@ubuntu:~$ timedatectl
               Local time: Wed 2021-06-02 23:29:43 CEST
           Universal time: Wed 2021-06-02 21:29:43 UTC
                 RTC time: n/a
                Time zone: Europe/Paris (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

und jetzt habe ich das

ubuntu@ubuntu:~$ timedatectl
               Local time: Thu 2021-06-03 08:48:04 CEST
           Universal time: Thu 2021-06-03 06:48:04 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

aber das hat leider nicht funktionniert heute früh
(abend geht es immer richtig zu, nur früh geht es nicht richtig auf

shuttercontrol.0	2021-06-03 08:50:00.004	debug	(7758) Sun Elevation: 32.3°
shuttercontrol.0	2021-06-03 08:50:00.004	debug	(7758) Sun Azimut: 92.8°
shuttercontrol.0	2021-06-03 08:50:00.003	debug	(7758) calculate astrodata ...
zwave2.0	2021-06-03 08:46:40.052	info	(4213) Node 9 is now asleep
zwave2.0	2021-06-03 08:46:38.953	info	(4213) Node 9 is now awake
zwave2.0	2021-06-03 08:46:38.648	debug	(4213) Node 9: value updated: isLow => false
zwave2.0	2021-06-03 08:46:38.647	debug	(4213) Node 9: value updated: level => 89
shuttercontrol.0	2021-06-03 08:45:00.005	debug	(7758) Sun Elevation: 31.5°
shuttercontrol.0	2021-06-03 08:45:00.004	debug	(7758) Sun Azimut: 91.8°
shuttercontrol.0	2021-06-03 08:45:00.003	debug	(7758) calculate astrodata ...
shuttercontrol.0	2021-06-03 08:43:27.658	debug	(7758) system.adapter.admin.0: logging true
zwave2.0	2021-06-03 08:43:27.657	debug	(4213) system.adapter.admin.0: logging true
shuttercontrol.0	2021-06-03 06:40:00.006	debug	(7758) Sun Elevation: 30.6°
shuttercontrol.0	2021-06-03 06:40:00.005	debug	(7758) Sun Azimut: 90.9°
shuttercontrol.0	2021-06-03 06:40:00.004	debug	(7758) calculate astrodata ...
shuttercontrol.0	2021-06-03 06:35:00.004	debug	(7758) Sun Elevation: 29.8°
shuttercontrol.0	2021-06-03 06:35:00.003	debug	(7758) Sun Azimut: 89.9°
shuttercontrol.0	2021-06-03 06:35:00.002	debug	(7758) calculate astrodata ...
shuttercontrol.0	2021-06-03 06:30:00.005	debug	(7758) Sun Elevation: 29°
shuttercontrol.0	2021-06-03 06:30:00.005	debug	(7758) Sun Azimut: 89°
shuttercontrol.0	2021-06-03 06:30:00.004	debug	(7758) calculate astrodata ...
shuttercontrol.0	2021-06-03 06:25:00.006	debug	(7758) Sun Elevation: 28.2°
shuttercontrol.0	2021-06-03 06:25:00.005	debug	(7758) Sun Azimut: 88°
shuttercontrol.0	2021-06-03 06:25:00.004	debug	(7758) calculate astrodata ...
info.0	2021-06-03 06:24:54.422	warn	(2114) State "info.0.uuid" has no existing object, this might lead to an error in future versions
zwave2.0	2021-06-03 06:23:52.058	debug	(4213) Node 31: value updated: value_electric_kwh_consumed => 0.12
zwave2.0	2021-06-03 06:21:10.978	debug	(4213) Node 32: value updated: value_electric_kwh_consumed => 0.15
zwave2.0	2021-06-03 06:21:04.256	debug	(4213) Node 34: value updated: value_electric_kwh_consumed => 0.11
shuttercontrol.0	2021-06-03 06:20:00.004	debug	(7758) Sun Elevation: 27.4°
shuttercontrol.0	2021-06-03 06:20:00.004	debug	(7758) Sun Azimut: 87.1°
shuttercontrol.0	2021-06-03 06:20:00.003	debug	(7758) calculate astrodata ...
zwave2.0	2021-06-03 06:18:32.589	debug	(4213) Node 35: value updated: currentValue => 99
zwave2.0	2021-06-03 06:18:32.587	debug	(4213) Node 35: value updated: duration => 0s
zwave2.0	2021-06-03 06:18:32.586	debug	(4213) Node 35: value updated: targetValue => 99
zwave2.0	2021-06-03 06:18:31.677	debug	(4213) Node 35: value updated: currentValue => 90
zwave2.0	2021-06-03 06:18:31.676	debug	(4213) Node 35: value updated: duration => 1s
zwave2.0	2021-06-03 06:18:31.674	debug	(4213) Node 35: value updated: targetValue => 99
zwave2.0	2021-06-03 06:18:30.867	debug	(4213) Node 35: value updated: currentValue => 80
zwave2.0	2021-06-03 06:18:30.866	debug	(4213) Node 35: value updated: duration => 2s
zwave2.0	2021-06-03 06:18:30.864	debug	(4213) Node 35: value updated: targetValue => 99
zwave2.0	2021-06-03 06:18:30.009	debug	(4213) Node 35: value updated: currentValue => 70
zwave2.0	2021-06-03 06:18:30.007	debug	(4213) Node 35: value updated: duration => 3s
zwave2.0	2021-06-03 06:18:30.005	debug	(4213) Node 35: value updated: targetValue => 99
zwave2.0	2021-06-03 06:18:29.094	debug	(4213) Node 35: value updated: currentValue => 60
zwave2.0	2021-06-03 06:18:29.087	debug	(4213) Node 35: value updated: duration => 4s
zwave2.0	2021-06-03 06:18:29.085	debug	(4213) Node 35: value updated: targetValue => 99
zwave2.0	2021-06-03 06:18:28.074	debug	(4213) Node 35: value updated: currentValue => 50
zwave2.0	2021-06-03 06:18:28.074	debug	(4213) Node 35: value updated: duration => 5s
zwave2.0	2021-06-03 06:18:28.073	debug	(4213) Node 35: value updated: targetValue => 99
zwave2.0	2021-06-03 06:18:26.954	debug	(4213) Node 35: value updated: currentValue => 40
zwave2.0	2021-06-03 06:18:26.953	debug	(4213) Node 35: value updated: duration => 6s
zwave2.0	2021-06-03 06:18:26.952	debug	(4213) Node 35: value updated: targetValue => 99
zwave2.0	2021-06-03 06:18:25.688	debug	(4213) Node 35: value updated: currentValue => 30
zwave2.0	2021-06-03 06:18:25.687	debug	(4213) Node 35: value updated: duration => 7s
zwave2.0	2021-06-03 06:18:25.685	debug	(4213) Node 35: value updated: targetValue => 99
zwave2.0	2021-06-03 06:18:24.169	debug	(4213) Node 35: value updated: currentValue => 20
zwave2.0	2021-06-03 06:18:24.168	debug	(4213) Node 35: value updated: duration => 9s
zwave2.0	2021-06-03 06:18:24.166	debug	(4213) Node 35: value updated: targetValue => 99
shuttercontrol.0	2021-06-03 06:18:22.164	debug	(7758) Volet chambre invité Haut Old value = 0. New value = 99. automatic is active
shuttercontrol.0	2021-06-03 06:18:22.163	debug	(7758) Shutter state changed: Volet chambre invité Haut old value = 0 new value = 99
shuttercontrol.0	2021-06-03 06:18:22.160	debug	(7758) Volet chambre invité Haut opened manually to 99. Old value = 0. New value = 99. Possibility to activate sunprotect enabled.
zwave2.0	2021-06-03 06:18:22.154	debug	(4213) Node 35: value updated: currentValue => 10
zwave2.0	2021-06-03 06:18:22.154	debug	(4213) Node 35: value updated: duration => 11s
zwave2.0	2021-06-03 06:18:22.153	debug	(4213) Node 35: value updated: targetValue => 99
zwave2.0	2021-06-03 06:18:20.468	debug	(4213) Node 35: value updated: value_electric_w_consumed => 115.6
zwave2.0	2021-06-03 06:17:02.996	debug	(4213) Node 29: value updated: value_electric_kwh_consumed => 0.1
zwave2.0	2021-06-03 06:17:01.224	debug	(4213) Node 30: value updated: value_electric_kwh_consumed => 0.11
shuttercontrol.0	2021-06-03 06:15:00.005	debug	(7758) Sun Elevation: 26.6°
shuttercontrol.0	2021-06-03 06:15:00.004	debug	(7758) Sun Azimut: 86.2°
shuttercontrol.0	2021-06-03 06:15:00.003	debug	(7758) calculate astrodata ...
zwave2.0	2021-06-03 06:11:11.424	debug	(4213) Node 26: value updated: value_electric_kwh_consumed => 0.16
zwave2.0	2021-06-03 06:10:42.971	debug	(4213) Node 33: value updated: value_electric_kwh_consumed => 0.12
shuttercontrol.0	2021-06-03 06:10:00.005	debug	(7758) Sun Elevation: 25.8°
shuttercontrol.0	2021-06-03 06:10:00.004	debug	(7758) Sun Azimut: 85.3°
shuttercontrol.0	2021-06-03 06:10:00.003	debug	(7758) calculate astrodata ...
zwave2.0	2021-06-03 06:05:55.310	debug	(4213) Node 29: value updated: currentValue => 99
zwave2.0	2021-06-03 06:05:55.305	debug	(4213) Node 29: value updated: duration => 0s
zwave2.0	2021-06-03 06:05:55.303	debug	(4213) Node 29: value updated: targetValue => 99
zwave2.0	2021-06-03 06:05:54.326	debug	(4213) Node 29: value updated: currentValue => 90
zwave2.0	2021-06-03 06:05:54.324	debug	(4213) Node 29: value updated: duration => 1s
zwave2.0	2021-06-03 06:05:54.323	debug	(4213) Node 29: value updated: targetValue => 99
zwave2.0	2021-06-03 06:05:53.911	debug	(4213) Node 29: value updated: value_electric_w_consumed => 117.9
zwave2.0	2021-06-03 06:05:53.436	debug	(4213) Node 29: value updated: currentValue => 80
zwave2.0	2021-06-03 06:05:53.435	debug	(4213) Node 29: value updated: duration => 2s
zwave2.0	2021-06-03 06:05:53.433	debug	(4213) Node 29: value updated: targetValue => 99
zwave2.0	2021-06-03 06:05:52.494	debug	(4213) Node 29: value updated: currentValue => 70
zwave2.0	2021-06-03 06:05:52.493	debug	(4213) Node 29: value updated: duration => 3s
zwave2.0	2021-06-03 06:05:52.492	debug	(4213) Node 29: value updated: targetValue => 99
zwave2.0	2021-06-03 06:05:51.487	debug	(4213) Node 29: value updated: currentValue => 60
zwave2.0	2021-06-03 06:05:51.486	debug	(4213) Node 29: value updated: duration => 4s
zwave2.0	2021-06-03 06:05:51.484	debug	(4213) Node 29: value updated: targetValue => 99
zwave2.0	2021-06-03 06:05:50.386	debug	(4213) Node 29: value updated: currentValue => 50
zwave2.0	2021-06-03 06:05:50.385	debug	(4213) Node 29: value updated: duration => 5s
zwave2.0	2021-06-03 06:05:50.383	debug	(4213) Node 29: value updated: targetValue => 99
zwave2.0	2021-06-03 06:05:49.155	debug	(4213) Node 29: value updated: currentValue => 40
zwave2.0	2021-06-03 06:05:49.154	debug	(4213) Node 29: value updated: duration => 6s
zwave2.0	2021-06-03 06:05:49.153	debug	(4213) Node 29: value updated: targetValue => 99
zwave2.0	2021-06-03 06:05:47.764	debug	(4213) Node 29: value updated: currentValue => 30
zwave2.0	2021-06-03 06:05:47.763	debug	(4213) Node 29: value updated: duration => 8s
zwave2.0	2021-06-03 06:05:47.761	debug	(4213) Node 29: value updated: targetValue => 99
zwave2.0	2021-06-03 06:05:46.104	debug	(4213) Node 29: value updated: currentValue => 20
zwave2.0	2021-06-03 06:05:46.103	debug	(4213) Node 29: value updated: duration => 9s
zwave2.0	2021-06-03 06:05:46.102	debug	(4213) Node 29: value updated: targetValue => 99
shuttercontrol.0	2021-06-03 06:05:43.919	debug	(7758) Volet Chambre Kilian Old value = 1. New value = 99. automatic is active
shuttercontrol.0	2021-06-03 06:05:43.918	debug	(7758) Shutter state changed: Volet Chambre Kilian old value = 1 new value = 99
shuttercontrol.0	2021-06-03 06:05:43.915	debug	(7758) Volet Chambre Kilian opened manually to 99. Old value = 1. New value = 99. Possibility to activate sunprotect enabled.
zwave2.0	2021-06-03 06:05:43.906	debug	(4213) Node 29: value updated: currentValue => 10
zwave2.0	2021-06-03 06:05:43.905	debug	(4213) Node 29: value updated: duration => 12s
zwave2.0	2021-06-03 06:05:43.903	debug	(4213) Node 29: value updated: targetValue => 99
shuttercontrol.0	2021-06-03 06:05:00.013	debug	(7758) Sun Elevation: 25°
shuttercontrol.0	2021-06-03 06:05:00.013	debug	(7758) Sun Azimut: 84.3°
shuttercontrol.0	2021-06-03 06:05:00.012	debug	(7758) calculate astrodata ...
zwave2.0	2021-06-03 06:04:48.221	debug	(4213) Node 30: value updated: currentValue => 99
zwave2.0	2021-06-03 06:04:48.220	debug	(4213) Node 30: value updated: duration => 0s
zwave2.0	2021-06-03 06:04:48.218	debug	(4213) Node 30: value updated: targetValue => 99
zwave2.0	2021-06-03 06:04:47.231	debug	(4213) Node 30: value updated: currentValue => 90
zwave2.0	2021-06-03 06:04:47.229	debug	(4213) Node 30: value updated: duration => 1s
zwave2.0	2021-06-03 06:04:47.228	debug	(4213) Node 30: value updated: targetValue => 99
zwave2.0	2021-06-03 06:04:46.358	debug	(4213) Node 30: value updated: currentValue => 80
zwave2.0	2021-06-03 06:04:46.357	debug	(4213) Node 30: value updated: duration => 2s
zwave2.0	2021-06-03 06:04:46.356	debug	(4213) Node 30: value updated: targetValue => 99
zwave2.0	2021-06-03 06:04:45.433	debug	(4213) Node 30: value updated: currentValue => 70
zwave2.0	2021-06-03 06:04:45.431	debug	(4213) Node 30: value updated: duration => 3s
zwave2.0	2021-06-03 06:04:45.429	debug	(4213) Node 30: value updated: targetValue => 99
zwave2.0	2021-06-03 06:04:44.432	debug	(4213) Node 30: value updated: currentValue => 60
zwave2.0	2021-06-03 06:04:44.431	debug	(4213) Node 30: value updated: duration => 4s
zwave2.0	2021-06-03 06:04:44.429	debug	(4213) Node 30: value updated: targetValue => 99
zwave2.0	2021-06-03 06:04:43.340	debug	(4213) Node 30: value updated: currentValue => 50
zwave2.0	2021-06-03 06:04:43.339	debug	(4213) Node 30: value updated: duration => 5s
zwave2.0	2021-06-03 06:04:43.337	debug	(4213) Node 30: value updated: targetValue => 99
zwave2.0	2021-06-03 06:04:42.146	debug	(4213) Node 30: value updated: currentValue => 40
zwave2.0	2021-06-03 06:04:42.145	debug	(4213) Node 30: value updated: duration => 6s
zwave2.0	2021-06-03 06:04:42.139	debug	(4213) Node 30: value updated: targetValue => 99
zwave2.0	2021-06-03 06:04:40.761	debug	(4213) Node 30: value updated: currentValue => 30
zwave2.0	2021-06-03 06:04:40.760	debug	(4213) Node 30: value updated: duration => 8s
zwave2.0	2021-06-03 06:04:40.758	debug	(4213) Node 30: value updated: targetValue => 99
zwave2.0	2021-06-03 06:04:39.131	debug	(4213) Node 30: value updated: currentValue => 20
zwave2.0	2021-06-03 06:04:39.129	debug	(4213) Node 30: value updated: duration => 9s
zwave2.0	2021-06-03 06:04:39.127	debug	(4213) Node 30: value updated: targetValue => 99
shuttercontrol.0	2021-06-03 06:04:36.971	debug	(7758) Volet Chambre Parents Old value = 0. New value = 99. automatic is active
shuttercontrol.0	2021-06-03 06:04:36.970	debug	(7758) Shutter state changed: Volet Chambre Parents old value = 0 new value = 99
shuttercontrol.0	2021-06-03 06:04:36.967	debug	(7758) Volet Chambre Parents opened manually to 99. Old value = 0. New value = 99. Possibility to activate sunprotect enabled.
zwave2.0	2021-06-03 06:04:36.959	debug	(4213) Node 30: value updated: currentValue => 10
zwave2.0	2021-06-03 06:04:36.958	debug	(4213) Node 30: value updated: duration => 12s
zwave2.0	2021-06-03 06:04:36.957	debug	(4213) Node 30: value updated: targetValue => 99
zwave2.0	2021-06-03 06:01:55.723	debug	(4213) Node 34: value updated: currentValue => 99
zwave2.0	2021-06-03 06:01:55.722	debug	(4213) Node 34: value updated: duration => 0s
zwave2.0	2021-06-03 06:01:55.720	debug	(4213) Node 34: value updated: targetValue => 99
zwave2.0	2021-06-03 06:01:55.371	debug	(4213) Node 34: value updated: currentValue => 96
zwave2.0	2021-06-03 06:01:55.369	debug	(4213) Node 34: value updated: duration => 1s
zwave2.0	2021-06-03 06:01:55.367	debug	(4213) Node 34: value updated: targetValue => 99
shuttercontrol.0	2021-06-03 06:01:40.068	debug	(7758) Volet bureau Haut Old value = 0. New value = 99. automatic is active
shuttercontrol.0	2021-06-03 06:01:40.067	debug	(7758) Shutter state changed: Volet bureau Haut old value = 0 new value = 99
shuttercontrol.0	2021-06-03 06:01:40.021	debug	(7758) shutterUpLiving #2 Volet bureau Haut old height: 0% new height: 99%
shuttercontrol.0	2021-06-03 06:01:40.020	info	(7758) #14 Set ID: Volet bureau Haut value: 99%
shuttercontrol.0	2021-06-03 06:01:30.020	debug	(7758) shutterUpLiving #2 Volet Fenetre Salle a manger already up at: 99% - setting current action: up
shuttercontrol.0	2021-06-03 06:01:20.019	debug	(7758) shutterUpLiving #2 Volet Porte salle a manger already up at: 99% - setting current action: up
shuttercontrol.0	2021-06-03 06:01:10.020	debug	(7758) shutterUpLiving #2 Volet Cuisine already up at: 99% - setting current action: up
shuttercontrol.0	2021-06-03 06:01:00.018	debug	(7758) shutterUpLiving #2 Volet fenetre Salon already up at: 99% - setting current action: up
zwave2.0	2021-06-03 06:00:51.385	debug	(4213) Node 35: value updated: value_electric_kwh_consumed => 0.09
shuttercontrol.0	2021-06-03 06:00:00.014	debug	(7758) Sun Elevation: 24.2°
shuttercontrol.0	2021-06-03 06:00:00.014	debug	(7758) Sun Azimut: 83.4°
shuttercontrol.0	2021-06-03 06:00:00.013	debug	(7758) calculate astrodata ...
shuttercontrol.0	2021-06-03 05:55:00.006	debug	(7758) Sun Elevation: 23.4°
shuttercontrol.0	2021-06-03 05:55:00.005	debug	(7758) Sun Azimut: 82.5°
shuttercontrol.0	2021-06-03 05:55:00.004	debug	(7758) calculate astrodata ...
info.0	2021-06-03 05:54:54.412	warn	(2114) State "info.0.uuid" has no existing object, this might lead to an error in future versions
shuttercontrol.0	2021-06-03 05:50:00.006	debug	(7758) Sun Elevation: 22.6°
shuttercontrol.0	2021-06-03 05:50:00.005	debug	(7758) Sun Azimut: 81.6°
shuttercontrol.0	2021-06-03 05:50:00.004	debug	(7758) calculate astrodata ...
shuttercontrol.0	2021-06-03 05:45:00.006	debug	(7758) Sun Elevation: 21.8°
shuttercontrol.0	2021-06-03 05:45:00.006	debug	(7758) Sun Azimut: 80.7°
shuttercontrol.0	2021-06-03 05:45:00.005	debug	(7758) calculate astrodata ...
shuttercontrol.0	2021-06-03 05:40:00.005	debug	(7758) Sun Elevation: 21°
shuttercontrol.0	2021-06-03 05:40:00.005	debug	(7758) Sun Azimut: 79.8°
shuttercontrol.0	2021-06-03 05:40:00.004	debug	(7758) calculate astrodata ...
shuttercontrol.0	2021-06-03 05:35:00.005	debug	(7758) Sun Elevation: 20.2°
shuttercontrol.0	2021-06-03 05:35:00.004	debug	(7758) Sun Azimut: 78.9°
shuttercontrol.0	2021-06-03 05:35:00.003	debug	(7758) calculate astrodata ...
shuttercontrol.0	2021-06-03 05:30:00.005	debug	(7758) Sun Elevation: 19.4°
shuttercontrol.0	2021-06-03 05:30:00.004	debug	(7758) Sun Azimut: 78°
shuttercontrol.0	2021-06-03 05:30:00.003	debug	(7758) calculate astrodata ...
shuttercontrol.0	2021-06-03 05:25:00.007	debug	(7758) Sun Elevation: 18.6°
shuttercontrol.0	2021-06-03 05:25:00.006	debug	(7758) Sun Azimut: 77.1°
shuttercontrol.0	2021-06-03 05:25:00.006	debug	(7758) calculate astrodata ...
info.0	2021-06-03 05:24:54.417	warn	(2114) State "info.0.uuid" has no existing object, this might lead to an error in future versions
zwave2.0	2021-06-03 05:23:59.485	info	(4213) Node 8 is now asleep
zwave2.0	2021-06-03 05:23:42.943	info	(4213) Node 8 is now awake
zwave2.0	2021-06-03 05:23:42.620	debug	(4213) Node 8: value updated: isLow => false
zwave2.0	2021-06-03 05:23:42.618	debug	(4213) Node 8: value updated: level => 73
zwave2.0	2021-06-03 05:21:10.989	debug	(4213) Node 32: value updated: value_electric_kwh_consumed => 0.15
zwave2.0	2021-06-03 05:21:03.595	debug	(4213) Node 34: value updated: value_electric_kwh_consumed => 0.11
shuttercontrol.0	2021-06-03 05:20:00.005	debug	(7758) Sun Elevation: 17.8°
shuttercontrol.0	2021-06-03 05:20:00.004	debug	(7758) Sun Azimut: 76.3°
shuttercontrol.0	2021-06-03 05:20:00.003	debug	(7758) calculate astrodata ...
zwave2.0	2021-06-03 05:17:02.489	debug	(4213) Node 29: value updated: value_electric_kwh_consumed => 0.1
zwave2.0	2021-06-03 05:17:00.748	debug	(4213) Node 30: value updated: value_electric_kwh_consumed => 0.11
zwave2.0	2021-06-03 05:16:11.873	info	(4213) Node 25 is now asleep
zwave2.0	2021-06-03 05:16:10.771	debug	(4213) Node 25: value updated: controllerNodeId => 1
zwave2.0	2021-06-03 05:16:10.769	debug	(4213) Node 25: value updated: wakeUpInterval => 21600
zwave2.0	2021-06-03 05:16:10.632	info	(4213) Node 25 is now awake
shuttercontrol.0	2021-06-03 05:15:00.007	debug	(7758) Sun Elevation: 17°
shuttercontrol.0	2021-06-03 05:15:00.006	debug	(7758) Sun Azimut: 75.4°
shuttercontrol.0	2021-06-03 05:15:00.005	debug	(7758) calculate astrodata ...
zwave2.0	2021-06-03 05:12:05.392	debug	(4213) Node 26: value updated: currentValue => 90
zwave2.0	2021-06-03 05:12:05.390	debug	(4213) Node 26: value updated: duration => 1s
zwave2.0	2021-06-03 05:12:05.388	debug	(4213) Node 26: value updated: targetValue => 99
zwave2.0	2021-06-03 05:12:04.217	debug	(4213) Node 26: value updated: currentValue => 80
zwave2.0	2021-06-03 05:12:04.215	debug	(4213) Node 26: value updated: duration => 2s
zwave2.0	2021-06-03 05:12:04.214	debug	(4213) Node 26: value updated: targetValue => 99
zwave2.0	2021-06-03 05:12:03.211	debug	(4213) Node 26: value updated: currentValue => 70
zwave2.0	2021-06-03 05:12:03.210	debug	(4213) Node 26: value updated: duration => 3s
zwave2.0	2021-06-03 05:12:03.208	debug	(4213) Node 26: value updated: targetValue => 99
zwave2.0	2021-06-03 05:12:01.989	debug	(4213) Node 26: value updated: currentValue => 60
zwave2.0	2021-06-03 05:12:01.987	debug	(4213) Node 26: value updated: duration => 5s
zwave2.0	2021-06-03 05:12:01.985	debug	(4213) Node 26: value updated: targetValue => 99
zwave2.0	2021-06-03 05:12:00.736	debug	(4213) Node 26: value updated: currentValue => 50
zwave2.0	2021-06-03 05:12:00.735	debug	(4213) Node 26: value updated: duration => 6s
zwave2.0	2021-06-03 05:12:00.732	debug	(4213) Node 26: value updated: targetValue => 99
zwave2.0	2021-06-03 05:11:59.361	debug	(4213) Node 26: value updated: currentValue => 40
zwave2.0	2021-06-03 05:11:59.359	debug	(4213) Node 26: value updated: duration => 7s
zwave2.0	2021-06-03 05:11:59.357	debug	(4213) Node 26: value updated: targetValue => 99
zwave2.0	2021-06-03 05:11:57.743	debug	(4213) Node 26: value updated: currentValue => 30
zwave2.0	2021-06-03 05:11:57.742	debug	(4213) Node 26: value updated: duration => 9s
zwave2.0	2021-06-03 05:11:57.740	debug	(4213) Node 26: value updated: targetValue => 99
zwave2.0	2021-06-03 05:11:57.169	debug	(4213) Node 33: value updated: currentValue => 99
zwave2.0	2021-06-03 05:11:57.168	debug	(4213) Node 33: value updated: duration => 0s
zwave2.0	2021-06-03 05:11:57.167	debug	(4213) Node 33: value updated: targetValue => 99
zwave2.0	2021-06-03 05:11:56.028	debug	(4213) Node 26: value updated: currentValue => 20
zwave2.0	2021-06-03 05:11:56.026	debug	(4213) Node 26: value updated: duration => 11s
zwave2.0	2021-06-03 05:11:56.024	debug	(4213) Node 26: value updated: targetValue => 99
zwave2.0	2021-06-03 05:11:55.921	debug	(4213) Node 33: value updated: currentValue => 90
zwave2.0	2021-06-03 05:11:55.920	debug	(4213) Node 33: value updated: duration => 1s
zwave2.0	2021-06-03 05:11:55.918	debug	(4213) Node 33: value updated: targetValue => 99
zwave2.0	2021-06-03 05:11:54.981	debug	(4213) Node 33: value updated: currentValue => 80
zwave2.0	2021-06-03 05:11:54.980	debug	(4213) Node 33: value updated: duration => 2s
zwave2.0	2021-06-03 05:11:54.979	debug	(4213) Node 33: value updated: targetValue => 99
zwave2.0	2021-06-03 05:11:53.972	debug	(4213) Node 33: value updated: currentValue => 70
zwave2.0	2021-06-03 05:11:53.971	debug	(4213) Node 33: value updated: duration => 3s
zwave2.0	2021-06-03 05:11:53.969	debug	(4213) Node 33: value updated: targetValue => 99
shuttercontrol.0	2021-06-03 05:11:53.353	debug	(7758) Volet fenetre Salon Old value = 1. New value = 99. automatic is active
shuttercontrol.0	2021-06-03 05:11:53.353	debug	(7758) Shutter state changed: Volet fenetre Salon old value = 1 new value = 99
shuttercontrol.0	2021-06-03 05:11:53.349	debug	(7758) Volet fenetre Salon opened manually to 99. Old value = 1. New value = 99. Possibility to activate sunprotect enabled.
zwave2.0	2021-06-03 05:11:53.342	debug	(4213) Node 26: value updated: currentValue => 10
zwave2.0	2021-06-03 05:11:53.341	debug	(4213) Node 26: value updated: duration => 13s
zwave2.0	2021-06-03 05:11:53.340	debug	(4213) Node 26: value updated: targetValue => 99
zwave2.0	2021-06-03 05:11:52.880	debug	(4213) Node 33: value updated: currentValue => 60
zwave2.0	2021-06-03 05:11:52.879	debug	(4213) Node 33: value updated: duration => 4s
zwave2.0	2021-06-03 05:11:52.877	debug	(4213) Node 33: value updated: targetValue => 99
zwave2.0	2021-06-03 05:11:51.697	debug	(4213) Node 33: value updated: currentValue => 50
zwave2.0	2021-06-03 05:11:51.696	debug	(4213) Node 33: value updated: duration => 6s
zwave2.0	2021-06-03 05:11:51.693	debug	(4213) Node 33: value updated: targetValue => 99
zwave2.0	2021-06-03 05:11:50.382	debug	(4213) Node 33: value updated: currentValue => 40
zwave2.0	2021-06-03 05:11:50.381	debug	(4213) Node 33: value updated: duration => 7s
zwave2.0	2021-06-03 05:11:50.379	debug	(4213) Node 33: value updated: targetValue => 99
zwave2.0	2021-06-03 05:11:48.888	debug	(4213) Node 33: value updated: currentValue => 30
zwave2.0	2021-06-03 05:11:48.887	debug	(4213) Node 33: value updated: duration => 8s
zwave2.0	2021-06-03 05:11:48.885	debug	(4213) Node 33: value updated: targetValue => 99
zwave2.0	2021-06-03 05:11:47.109	debug	(4213) Node 33: value updated: currentValue => 20
zwave2.0	2021-06-03 05:11:47.107	debug	(4213) Node 33: value updated: duration => 10s
zwave2.0	2021-06-03 05:11:47.105	debug	(4213) Node 33: value updated: targetValue => 99
shuttercontrol.0	2021-06-03 05:11:44.751	debug	(7758) Volet Fenetre Salle a manger Old value = 1. New value = 99. automatic is active
shuttercontrol.0	2021-06-03 05:11:44.751	debug	(7758) Shutter state changed: Volet Fenetre Salle a manger old value = 1 new value = 99
shuttercontrol.0	2021-06-03 05:11:44.747	debug	(7758) Volet Fenetre Salle a manger opened manually to 99. Old value = 1. New value = 99. Possibility to activate sunprotect enabled.
zwave2.0	2021-06-03 05:11:44.741	debug	(4213) Node 33: value updated: currentValue => 10
zwave2.0	2021-06-03 05:11:44.740	debug	(4213) Node 33: value updated: duration => 13s
zwave2.0	2021-06-03 05:11:44.739	debug	(4213) Node 33: value updated: targetValue => 99
zwave2.0	2021-06-03 05:11:10.677	debug	(4213) Node 26: value updated: value_electric_kwh_consumed => 0.16
zwave2.0	2021-06-03 05:10:42.440	debug	(4213) Node 33: value updated: value_electric_kwh_consumed => 0.12
shuttercontrol.0	2021-06-03 05:10:00.005	debug	(7758) Sun Elevation: 16.2°
shuttercontrol.0	2021-06-03 05:10:00.004	debug	(7758) Sun Azimut: 74.5°
shuttercontrol.0	2021-06-03 05:10:00.003	debug	(7758) calculate astrodata ...
zwave2.0	2021-06-03 05:06:16.895	debug	(4213) Node 31: value updated: value_electric_w_consumed => 1.3
zwave2.0	2021-06-03 05:06:15.964	debug	(4213) Node 31: value updated: currentValue => 99
zwave2.0	2021-06-03 05:06:15.963	debug	(4213) Node 31: value updated: duration => 0s
zwave2.0	2021-06-03 05:06:15.961	debug	(4213) Node 31: value updated: targetValue => 99
zwave2.0	2021-06-03 05:06:14.864	debug	(4213) Node 31: value updated: currentValue => 90
zwave2.0	2021-06-03 05:06:14.863	debug	(4213) Node 31: value updated: duration => 1s
zwave2.0	2021-06-03 05:06:14.861	debug	(4213) Node 31: value updated: targetValue => 99
zwave2.0	2021-06-03 05:06:13.978	debug	(4213) Node 31: value updated: currentValue => 80
zwave2.0	2021-06-03 05:06:13.977	debug	(4213) Node 31: value updated: duration => 2s
zwave2.0	2021-06-03 05:06:13.975	debug	(4213) Node 31: value updated: targetValue => 99
zwave2.0	2021-06-03 05:06:13.035	debug	(4213) Node 31: value updated: currentValue => 70
zwave2.0	2021-06-03 05:06:13.034	debug	(4213) Node 31: value updated: duration => 3s
zwave2.0	2021-06-03 05:06:13.032	debug	(4213) Node 31: value updated: targetValue => 99
zwave2.0	2021-06-03 05:06:12.015	debug	(4213) Node 31: value updated: currentValue => 60
zwave2.0	2021-06-03 05:06:12.014	debug	(4213) Node 31: value updated: duration => 4s
zwave2.0	2021-06-03 05:06:12.012	debug	(4213) Node 31: value updated: targetValue => 99
zwave2.0	2021-06-03 05:06:10.905	debug	(4213) Node 31: value updated: currentValue => 50
zwave2.0	2021-06-03 05:06:10.904	debug	(4213) Node 31: value updated: duration => 5s
zwave2.0	2021-06-03 05:06:10.902	debug	(4213) Node 31: value updated: targetValue => 99
zwave2.0	2021-06-03 05:06:09.676	debug	(4213) Node 31: value updated: currentValue => 40
zwave2.0	2021-06-03 05:06:09.674	debug	(4213) Node 31: value updated: duration => 6s
zwave2.0	2021-06-03 05:06:09.672	debug	(4213) Node 31: value updated: targetValue => 99
zwave2.0	2021-06-03 05:06:08.274	debug	(4213) Node 31: value updated: currentValue => 30
zwave2.0	2021-06-03 05:06:08.273	debug	(4213) Node 31: value updated: duration => 8s
zwave2.0	2021-06-03 05:06:08.272	debug	(4213) Node 31: value updated: targetValue => 99
zwave2.0	2021-06-03 05:06:06.604	debug	(4213) Node 31: value updated: currentValue => 20
zwave2.0	2021-06-03 05:06:06.603	debug	(4213) Node 31: value updated: duration => 10s

Tolkin

Hallo, ich habe am Gartenhaus einen HM Temperaturdifferenz Sensor mit zwei Sensoren. Ein Sensor befindet sich im Schatten und der andere im Glas auf dem Dach. Sobald die Sonne scheint, erwärmt sich die Temperatur im Glas und die Temperaturdifferenz erhöht sich. Jetzt möchte ich bei einer Innentemperatur von über 23Grad einer Außentemperatur von über 23 Grad und einer Differenztemperatur von 5 Grad die Rollos auf 30 % fahren. Das ganze noch Zeitgesteuert, da die Sonne Morgens hinter dem Haus scheint und Nachmittags vorne. Kann mir jemand mal ein Beispiel zeigen, wie sowas aussehen könnte?

Negalein

@foxro sagte in Test Adapter shuttercontrol v1.2.x:

Wenn dem so ist, kannst mal den versch. Rollos leicht unterschiedliche Temp. konfigurieren, so dass sie nicht gleichzeitig das gleiche Signal bekommen?

Hallo

Leider funktioniert es nicht.
Bei allen 3 Rollos unterschiedliche Temperaturen eingestellt.
Wohnzimmer zB 26°C
schließen bei 26°C funktioniert
öffnen sollte dann bei 24,7°C (26 - 5%) (aktuell hats 22°C und die Rollos sind noch immer im Sonnenschutz.
tuts leider nicht

Kann ich noch wo ansetzen?

2021-06-04 05:38:00.055  - [32minfo[39m: shuttercontrol.0 (19391) #13 Set ID: Rollo Wohnzimmer value: 100%
2021-06-04 05:38:10.025  - [32minfo[39m: shuttercontrol.0 (19391) #13 Set ID: Rollo Schlafzimmer value: 100%
2021-06-04 06:15:00.431  - [32minfo[39m: shuttercontrol.0 (19391) #21 Set ID: Rollo Kinderzimmer value: 100%
2021-06-04 10:54:45.222  - [32minfo[39m: shuttercontrol.0 (19391)  Will sunprotect ID: Rollo Kinderzimmer value: 30% after the window has been closed 
2021-06-04 10:58:25.428  - [32minfo[39m: shuttercontrol.0 (19391) Window is still closed -> drive to last height: 30% for device: Rollo Kinderzimmer
2021-06-04 11:31:47.445  - [32minfo[39m: shuttercontrol.0 (19391) Set ID: Rollo Schlafzimmer value: 30%
2021-06-04 12:33:09.622  - [32minfo[39m: shuttercontrol.0 (19391) Set ID: Rollo Wohnzimmer value: 30%
2021-06-04 19:00:00.302  - [32minfo[39m: shuttercontrol.0 (19391) #26 Set ID: Rollo Kinderzimmer value: 0%

Tolkin

Leider funktioniert das automatische Herunterfahren nach schließen der Terrassentüre immer noch nicht. Ich habe bewusst gerade die Türe offen gelassen, Rollo ist nicht heruntergefahren - ist ja richtig.

Wird die Terrassentüre geschlossen, bleibt das Rollo oben.
Hier mal meine Config


  "_id": "system.adapter.shuttercontrol.0",
  "common": {
    "name": "shuttercontrol",
    "version": "1.2.0",
    "title": "shuttercontrol",
    "authors": [
      "simatec <nais@gmx.net>"
    ],
    "contributors": [
      "Rene G. <info@rg-engineering.eu>"
    ],
    "keywords": [
      "ioBroker",
      "Smart Home",
      "home automation",
      "Rollladen",
      "Jalousie",
      "Rollladensteuerung"
    ],
    "license": "MIT",
    "platform": "Javascript/Node.js",
    "main": "main.js",
    "icon": "shuttercontrol.png",
    "enabled": true,
    "extIcon": "https://raw.githubusercontent.com/simatec/ioBroker.shuttercontrol/master/admin/shuttercontrol.png",
    "readme": "https://github.com/simatec/ioBroker.shuttercontrol/blob/master/README.md",
    "loglevel": "info",
    "mode": "daemon",
    "type": "climate-control",
    "compact": true,
    "materialize": true,
    "stopBeforeUpdate": true,
    "plugins": {
      "sentry": {
        "dsn": "https://5f58df7167d846e3a90bae5414d4fc09@sentry.iobroker.net/62"
      }
    },
    "installedFrom": "iobroker.shuttercontrol@1.2.0",
    "installedVersion": "1.2.0",
    "host": "ioBrokerVM",
    "connectionType": "local",
    "dataSource": "push",
    "adminUI": {
      "config": "materialize"
    }
  },
  "native": {
    "livingAutomatic": "livingSunriseSunset",
    "W_shutterDownLiving": "22:15",
    "W_shutterUpLivingMin": "06:50",
    "W_shutterUpLivingMax": "06:50",
    "driveDelayUpLiving": "2",
    "WE_shutterDownLiving": "22:15",
    "WE_shutterUpLivingMin": "07:15",
    "WE_shutterUpLivingMax": "07:15",
    "sleepAutomatic": "sleepSunriseSunset",
    "W_shutterDownSleep": "21:30",
    "W_shutterUpSleepMin": "07:15",
    "W_shutterUpSleepMax": "07:15",
    "driveDelayUpSleep": "2",
    "WE_shutterDownSleep": "21:30",
    "WE_shutterUpSleepMin": "07:15",
    "WE_shutterUpSleepMax": "07:15",
    "childrenAutomatic": "childrenSunriseSunset",
    "W_shutterDownChildren": "21:30",
    "W_shutterUpChildrenMin": "06:50",
    "W_shutterUpChildrenMax": "07:15",
    "driveDelayUpChildren": "2",
    "WE_shutterDownChildren": "21:30",
    "WE_shutterUpChildrenMin": "07:15",
    "WE_shutterUpChildrenMax": "07:15",
    "latitude": "51.1083808",
    "longitude": "6.100284984375",
    "sunProtEndElevation": "10",
    "astroDelayUp": "0",
    "astroDelayDown": "30",
    "driveDelayUpAstro": "2",
    "SummerStart": "01.03.",
    "SummerEnd": "30.09.",
    "XMasStart": "01.12.",
    "XMasEnd": "06.01.",
    "publicHolidays": true,
    "publicHolInstance": "feiertage.0",
    "HolidayDP": "",
    "lightsensorDown": "400",
    "lightsensorUp": "500",
    "lightsensorUpDown": "",
    "schoolfree": false,
    "schoolfreeInstance": "",
    "schoolfreeChildrenArea": true,
    "schoolfreeSleepArea": false,
    "schoolfreeLivingArea": false,
    "LateAllDown": false,
    "LateAllDownTime": "22:15",
    "betweenPositionTime": "22:00",
    "noGoTime": "0",
    "currentShutterState": false,
    "currentShutterStateTime": "60",
    "triggerAutoSleep": "hm-rpc.0.MEQ1234567.2.STATE",
    "triggerAutoLiving": "hm-rpc.0.MEQ1234567.2.STATE",
    "triggerAutoChildren": "hm-rpc.0.MEQ1234567.2.STATE",
    "heightDownSun": "30",
    "direction": "120",
    "type": "in- & outside temperature and direction",
    "directionRange": "50",
    "actualValueTemp": "",
    "actualValueLight": "",
    "actualValueTempInside": "",
    "typeDown": "living",
    "typeUp": "living",
    "triggerStateShutter": "false",
    "triggerChangeShutter": "upDown",
    "triggerDriveShutter": "100",
    "autoDriveShutter": "onlyUp",
    "heightDownShutter": "0",
    "heightUpShutter": "100",
    "triggerID": "hm-rpc.1.0007DA49A8BE5F.1.STATE",
    "LateDown": false,
    "inSummerNotDown": false,
    "driveAfterClose": true,
    "useXmasLevel": false,
    "XmasLevel": "0",
    "KeepSunProtect": false,
    "trigDelyUp": "0",
    "trigDelyDown": "0",
    "betweenPosition": false,
    "betweenPositionLevel": "100",
    "events": [
      {
        "enabled": true,
        "shutterName": "Rollade Büro",
        "name": "shelly.0.SHSW-25#745238#1.Shutter.Position",
        "triggerID": "",
        "typeUp": "living",
        "typeDown": "living",
        "type": "",
        "heightDownSun": "30",
        "direction": "120",
        "directionRange": "50",
        "tempInside": "23",
        "tempSensor": "",
        "outsideTempSensor": "",
        "tempOutside": "23",
        "lightSensor": "",
        "valueLight": "15",
        "heightUp": "100",
        "heightDown": "0",
        "triggerState": "true",
        "triggerDrive": "100",
        "triggerChange": "off",
        "elevation": "8",
        "autoDrive": "off",
        "hysteresisOutside": "5",
        "hysteresisInside": "5",
        "hysteresisLight": "5",
        "currentAction": "",
        "currentHeight": "",
        "oldHeight": "",
        "firstCompleteUp": "",
        "triggerHeight": "",
        "LateDown": false,
        "inSummerNotDown": false,
        "KeepSunProtect": false,
        "triggerAction": "",
        "driveAfterClose": false,
        "useXmasLevel": false,
        "XmasLevel": "0",
        "betweenPosition": false,
        "betweenPositionLevel": "50",
        "trigDelyUp": "0",
        "trigDelyDown": "0"
      },
      {
        "enabled": true,
        "shutterName": "Rollade Gäste WC",
        "name": "shelly.0.SHSW-25#10F12F#1.Shutter.Position",
        "triggerID": "",
        "typeUp": "living",
        "typeDown": "living",
        "type": "",
        "heightDownSun": "30",
        "direction": "120",
        "directionRange": "50",
        "tempInside": "23",
        "tempSensor": "",
        "outsideTempSensor": "",
        "tempOutside": "23",
        "lightSensor": "",
        "valueLight": "15",
        "heightUp": "100",
        "heightDown": "0",
        "triggerState": "true",
        "triggerDrive": "100",
        "triggerChange": "off",
        "elevation": "8",
        "autoDrive": "off",
        "hysteresisOutside": "5",
        "hysteresisInside": "5",
        "hysteresisLight": "5",
        "currentAction": "",
        "currentHeight": "",
        "oldHeight": "",
        "firstCompleteUp": "",
        "triggerHeight": "",
        "LateDown": false,
        "inSummerNotDown": false,
        "KeepSunProtect": false,
        "triggerAction": "",
        "driveAfterClose": false,
        "useXmasLevel": false,
        "XmasLevel": "0",
        "betweenPosition": false,
        "betweenPositionLevel": "50",
        "trigDelyUp": "0",
        "trigDelyDown": "0"
      },
      {
        "enabled": true,
        "shutterName": "Rollade Küche 1",
        "name": "shelly.0.SHSW-25#10A37C#1.Shutter.Position",
        "triggerID": "",
        "typeUp": "living",
        "typeDown": "living",
        "type": "in- & outside temperature and direction",
        "heightDownSun": "30",
        "direction": "120",
        "directionRange": "50",
        "tempInside": "23",
        "tempSensor": "",
        "outsideTempSensor": "",
        "tempOutside": "23",
        "lightSensor": "",
        "valueLight": "15",
        "heightUp": "100",
        "heightDown": "0",
        "triggerState": "true",
        "triggerDrive": "100",
        "triggerChange": "off",
        "elevation": "8",
        "autoDrive": "off",
        "hysteresisOutside": "5",
        "hysteresisInside": "5",
        "hysteresisLight": "5",
        "currentAction": "",
        "currentHeight": "",
        "oldHeight": "",
        "firstCompleteUp": "",
        "triggerHeight": "",
        "LateDown": false,
        "inSummerNotDown": false,
        "KeepSunProtect": false,
        "triggerAction": "",
        "driveAfterClose": false,
        "useXmasLevel": false,
        "XmasLevel": "0",
        "betweenPosition": false,
        "betweenPositionLevel": "50",
        "trigDelyUp": "0",
        "trigDelyDown": "0"
      },
      {
        "enabled": true,
        "shutterName": "Rollade Küche 2",
        "name": "shelly.0.SHSW-25#F40C85#1.Shutter.Position",
        "triggerID": "",
        "typeUp": "living",
        "typeDown": "living",
        "type": "in- & outside temperature and direction",
        "heightDownSun": "30",
        "direction": "120",
        "directionRange": "50",
        "tempInside": "23",
        "tempSensor": "",
        "outsideTempSensor": "",
        "tempOutside": "23",
        "lightSensor": "",
        "valueLight": "15",
        "heightUp": "100",
        "heightDown": "0",
        "triggerState": "true",
        "triggerDrive": "100",
        "triggerChange": "off",
        "elevation": "8",
        "autoDrive": "off",
        "hysteresisOutside": "5",
        "hysteresisInside": "5",
        "hysteresisLight": "5",
        "currentAction": "",
        "currentHeight": "",
        "oldHeight": "",
        "firstCompleteUp": "",
        "triggerHeight": "",
        "LateDown": false,
        "inSummerNotDown": false,
        "KeepSunProtect": false,
        "triggerAction": "",
        "driveAfterClose": false,
        "useXmasLevel": false,
        "XmasLevel": "0",
        "betweenPosition": false,
        "betweenPositionLevel": "50",
        "trigDelyUp": "0",
        "trigDelyDown": "0"
      },
      {
        "enabled": true,
        "shutterName": "Rollade HWR",
        "name": "shelly.0.SHSW-25#F33F23#1.Shutter.Position",
        "triggerID": "",
        "typeUp": "living",
        "typeDown": "living",
        "type": "",
        "heightDownSun": "30",
        "direction": "120",
        "directionRange": "50",
        "tempInside": "23",
        "tempSensor": "",
        "outsideTempSensor": "",
        "tempOutside": "23",
        "lightSensor": "",
        "valueLight": "15",
        "heightUp": "100",
        "heightDown": "0",
        "triggerState": "true",
        "triggerDrive": "100",
        "triggerChange": "off",
        "elevation": "8",
        "autoDrive": "off",
        "hysteresisOutside": "5",
        "hysteresisInside": "5",
        "hysteresisLight": "5",
        "currentAction": "",
        "currentHeight": "",
        "oldHeight": "",
        "firstCompleteUp": "",
        "triggerHeight": "",
        "LateDown": false,
        "inSummerNotDown": false,
        "KeepSunProtect": false,
        "triggerAction": "",
        "driveAfterClose": false,
        "useXmasLevel": false,
        "XmasLevel": "0",
        "betweenPosition": false,
        "betweenPositionLevel": "50",
        "trigDelyUp": "0",
        "trigDelyDown": "0"
      },
      {
        "enabled": true,
        "shutterName": "Rollade Esszimmer",
        "name": "shelly.0.SHSW-25#10F7C0#1.Shutter.Position",
        "triggerID": "hm-rpc.1.0007DA49A8BE5F.1.STATE",
        "typeUp": "living",
        "typeDown": "living",
        "type": "in- & outside temperature and direction",
        "heightDownSun": "30",
        "direction": "120",
        "directionRange": "50",
        "tempInside": "23",
        "tempSensor": "",
        "outsideTempSensor": "",
        "tempOutside": "23",
        "lightSensor": "",
        "valueLight": "15",
        "heightUp": "100",
        "heightDown": "0",
        "triggerState": "false",
        "triggerDrive": "100",
        "triggerChange": "upDown",
        "elevation": "",
        "autoDrive": "onlyUp",
        "hysteresisOutside": "5",
        "hysteresisInside": "5",
        "hysteresisLight": "5",
        "currentAction": "",
        "currentHeight": "",
        "oldHeight": "",
        "firstCompleteUp": "",
        "triggerHeight": "",
        "LateDown": false,
        "inSummerNotDown": false,
        "KeepSunProtect": false,
        "triggerAction": "",
        "driveAfterClose": true,
        "useXmasLevel": false,
        "XmasLevel": "0",
        "betweenPosition": false,
        "betweenPositionLevel": "100",
        "trigDelyUp": "0",
        "trigDelyDown": "0"
      },
      {
        "enabled": true,
        "shutterName": "Rollade Wohnzimmer 1",
        "name": "shelly.0.SHSW-25#10FB17#1.Shutter.Position",
        "triggerID": "",
        "typeUp": "living",
        "typeDown": "living",
        "type": "in- & outside temperature and direction",
        "heightDownSun": "30",
        "direction": "120",
        "directionRange": "50",
        "tempInside": "23",
        "tempSensor": "",
        "outsideTempSensor": "",
        "tempOutside": "23",
        "lightSensor": "",
        "valueLight": "15",
        "heightUp": "100",
        "heightDown": "0",
        "triggerState": "true",
        "triggerDrive": "100",
        "triggerChange": "off",
        "elevation": "8",
        "autoDrive": "off",
        "hysteresisOutside": "5",
        "hysteresisInside": "5",
        "hysteresisLight": "5",
        "currentAction": "",
        "currentHeight": "",
        "oldHeight": "",
        "firstCompleteUp": "",
        "triggerHeight": "",
        "LateDown": false,
        "inSummerNotDown": false,
        "KeepSunProtect": false,
        "triggerAction": "",
        "driveAfterClose": false,
        "useXmasLevel": false,
        "XmasLevel": "0",
        "betweenPosition": false,
        "betweenPositionLevel": "50",
        "trigDelyUp": "0",
        "trigDelyDown": "0"
      },
      {
        "enabled": true,
        "shutterName": "Rollade Wohnzimmer 2",
        "name": "shelly.0.SHSW-25#10FFEF#1.Shutter.Position",
        "triggerID": "",
        "typeUp": "living",
        "typeDown": "living",
        "type": "in- & outside temperature and direction",
        "heightDownSun": "30",
        "direction": "120",
        "directionRange": "50",
        "tempInside": "23",
        "tempSensor": "",
        "outsideTempSensor": "",
        "tempOutside": "23",
        "lightSensor": "",
        "valueLight": "15",
        "heightUp": "100",
        "heightDown": "0",
        "triggerState": "true",
        "triggerDrive": "100",
        "triggerChange": "off",
        "elevation": "8",
        "autoDrive": "off",
        "hysteresisOutside": "5",
        "hysteresisInside": "5",
        "hysteresisLight": "5",
        "currentAction": "",
        "currentHeight": "",
        "oldHeight": "",
        "firstCompleteUp": "",
        "triggerHeight": "",
        "LateDown": false,
        "inSummerNotDown": false,
        "KeepSunProtect": false,
        "triggerAction": "",
        "driveAfterClose": false,
        "useXmasLevel": false,
        "XmasLevel": "0",
        "betweenPosition": false,
        "betweenPositionLevel": "50",
        "trigDelyUp": "0",
        "trigDelyDown": "0"
      },
      {
        "enabled": true,
        "shutterName": "Rollade Wohnzimmer 3",
        "name": "shelly.0.SHSW-25#10C704#1.Shutter.Position",
        "triggerID": "",
        "typeUp": "living",
        "typeDown": "living",
        "type": "in- & outside temperature and direction",
        "heightDownSun": "30",
        "direction": "120",
        "directionRange": "50",
        "tempInside": "23",
        "tempSensor": "",
        "outsideTempSensor": "",
        "tempOutside": "23",
        "lightSensor": "",
        "valueLight": "15",
        "heightUp": "100",
        "heightDown": "0",
        "triggerState": "true",
        "triggerDrive": "100",
        "triggerChange": "off",
        "elevation": "8",
        "autoDrive": "off",
        "hysteresisOutside": "5",
        "hysteresisInside": "5",
        "hysteresisLight": "5",
        "currentAction": "",
        "currentHeight": "",
        "oldHeight": "",
        "firstCompleteUp": "",
        "triggerHeight": "",
        "LateDown": false,
        "inSummerNotDown": false,
        "KeepSunProtect": false,
        "triggerAction": "",
        "driveAfterClose": false,
        "useXmasLevel": false,
        "XmasLevel": "0",
        "betweenPosition": false,
        "betweenPositionLevel": "50",
        "trigDelyUp": "0",
        "trigDelyDown": "0"
      },
      {
        "enabled": true,
        "shutterName": "Rollade Wohnzimmer4",
        "name": "hm-rpc.0.OEQ0563433.1.LEVEL",
        "triggerID": "",
        "typeUp": "living",
        "typeDown": "living",
        "type": "",
        "heightDownSun": "30",
        "direction": "120",
        "directionRange": "50",
        "tempInside": "23",
        "tempSensor": "",
        "outsideTempSensor": "",
        "tempOutside": "23",
        "lightSensor": "",
        "valueLight": "15",
        "heightUp": "100",
        "heightDown": "0",
        "triggerState": "true",
        "triggerDrive": "100",
        "triggerChange": "off",
        "elevation": "8",
        "autoDrive": "off",
        "hysteresisOutside": "5",
        "hysteresisInside": "5",
        "hysteresisLight": "5",
        "currentAction": "",
        "currentHeight": "",
        "oldHeight": "",
        "firstCompleteUp": "",
        "triggerHeight": "",
        "LateDown": false,
        "inSummerNotDown": false,
        "KeepSunProtect": false,
        "triggerAction": "",
        "driveAfterClose": false,
        "useXmasLevel": false,
        "XmasLevel": "0",
        "betweenPosition": false,
        "betweenPositionLevel": "50",
        "trigDelyUp": "0",
        "trigDelyDown": "0"
      },
      {
        "enabled": true,
        "shutterName": "Rollade Kind 1",
        "name": "shelly.0.SHSW-25#F37A89#1.Shutter.Position",
        "triggerID": "",
        "typeUp": "off",
        "typeDown": "sleep",
        "type": "in- & outside temperature and direction",
        "heightDownSun": "30",
        "direction": "120",
        "directionRange": "50",
        "tempInside": "23",
        "tempSensor": "",
        "outsideTempSensor": "",
        "tempOutside": "23",
        "lightSensor": "",
        "valueLight": "15",
        "heightUp": "100",
        "heightDown": "6",
        "triggerState": "true",
        "triggerDrive": "100",
        "triggerChange": "off",
        "elevation": "8",
        "autoDrive": "off",
        "hysteresisOutside": "5",
        "hysteresisInside": "5",
        "hysteresisLight": "5",
        "currentAction": "",
        "currentHeight": "",
        "oldHeight": "",
        "firstCompleteUp": "",
        "triggerHeight": "",
        "LateDown": false,
        "inSummerNotDown": false,
        "KeepSunProtect": false,
        "triggerAction": "",
        "driveAfterClose": false,
        "useXmasLevel": false,
        "XmasLevel": "0",
        "betweenPosition": false,
        "betweenPositionLevel": "50",
        "trigDelyUp": "0",
        "trigDelyDown": "0"
      },
      {
        "enabled": true,
        "shutterName": "Rollade Eltern",
        "name": "shelly.0.SHSW-25#10B303#1.Shutter.Position",
        "triggerID": "",
        "typeUp": "off",
        "typeDown": "sleep",
        "type": "in- & outside temperature and direction",
        "heightDownSun": "30",
        "direction": "120",
        "directionRange": "50",
        "tempInside": "23",
        "tempSensor": "",
        "outsideTempSensor": "",
        "tempOutside": "23",
        "lightSensor": "",
        "valueLight": "15",
        "heightUp": "100",
        "heightDown": "5",
        "triggerState": "true",
        "triggerDrive": "100",
        "triggerChange": "off",
        "elevation": "8",
        "autoDrive": "off",
        "hysteresisOutside": "5",
        "hysteresisInside": "5",
        "hysteresisLight": "5",
        "currentAction": "",
        "currentHeight": "",
        "oldHeight": "",
        "firstCompleteUp": "",
        "triggerHeight": "",
        "LateDown": false,
        "inSummerNotDown": false,
        "KeepSunProtect": false,
        "triggerAction": "",
        "driveAfterClose": false,
        "useXmasLevel": false,
        "XmasLevel": "0",
        "betweenPosition": false,
        "betweenPositionLevel": "50",
        "trigDelyUp": "0",
        "trigDelyDown": "0"
      },
      {
        "enabled": true,
        "shutterName": "Rollade Bad",
        "name": "shelly.0.SHSW-25#F350AC#1.Shutter.Position",
        "triggerID": "",
        "typeUp": "off",
        "typeDown": "sleep",
        "type": "in- & outside temperature and direction",
        "heightDownSun": "30",
        "direction": "120",
        "directionRange": "50",
        "tempInside": "23",
        "tempSensor": "",
        "outsideTempSensor": "",
        "tempOutside": "23",
        "lightSensor": "",
        "valueLight": "15",
        "heightUp": "100",
        "heightDown": "10",
        "triggerState": "true",
        "triggerDrive": "100",
        "triggerChange": "off",
        "elevation": "8",
        "autoDrive": "off",
        "hysteresisOutside": "5",
        "hysteresisInside": "5",
        "hysteresisLight": "5",
        "currentAction": "",
        "currentHeight": "",
        "oldHeight": "",
        "firstCompleteUp": "",
        "triggerHeight": "",
        "LateDown": false,
        "inSummerNotDown": false,
        "KeepSunProtect": false,
        "triggerAction": "",
        "driveAfterClose": false,
        "useXmasLevel": false,
        "XmasLevel": "0",
        "betweenPosition": false,
        "betweenPositionLevel": "50",
        "trigDelyUp": "0",
        "trigDelyDown": "0"
      },
      {
        "enabled": true,
        "shutterName": "Rollade Kind2",
        "name": "shelly.0.SHSW-25#F342A7#1.Shutter.Position",
        "triggerID": "",
        "typeUp": "off",
        "typeDown": "sleep",
        "type": "",
        "heightDownSun": "30",
        "direction": "120",
        "directionRange": "50",
        "tempInside": "23",
        "tempSensor": "",
        "outsideTempSensor": "",
        "tempOutside": "23",
        "lightSensor": "",
        "valueLight": "15",
        "heightUp": "100",
        "heightDown": "6",
        "triggerState": "true",
        "triggerDrive": "100",
        "triggerChange": "off",
        "elevation": "8",
        "autoDrive": "off",
        "hysteresisOutside": "5",
        "hysteresisInside": "5",
        "hysteresisLight": "5",
        "currentAction": "",
        "currentHeight": "",
        "oldHeight": "",
        "firstCompleteUp": "",
        "triggerHeight": "",
        "LateDown": false,
        "inSummerNotDown": false,
        "KeepSunProtect": false,
        "triggerAction": "",
        "driveAfterClose": false,
        "useXmasLevel": false,
        "XmasLevel": "0",
        "betweenPosition": false,
        "betweenPositionLevel": "50",
        "trigDelyUp": "0",
        "trigDelyDown": "0"
      }
    ]
  }
}

Hier das Debug Protokoll

2021-06-04 22:10:00.002 - debug: shuttercontrol.0 (28668) calculate astrodata ...
2021-06-04 22:10:00.003 - debug: shuttercontrol.0 (28668) Sun Azimut: 313.9°
2021-06-04 22:10:00.003 - debug: shuttercontrol.0 (28668) Sun Elevation: -3.8°
2021-06-04 22:15:00.010 - debug: shuttercontrol.0 (28668) calculate astrodata ...
2021-06-04 22:15:00.010 - debug: shuttercontrol.0 (28668) Sun Azimut: 314.9°
2021-06-04 22:15:00.010 - debug: shuttercontrol.0 (28668) Sun Elevation: -4.4°
2021-06-04 22:15:00.020 - debug: shuttercontrol.0 (28668) check in time 01.03. 30.09.
2021-06-04 22:15:00.020 - debug: shuttercontrol.0 (28668) Start Mon Mar 01 2021
2021-06-04 22:15:00.020 - debug: shuttercontrol.0 (28668) End Thu Sep 30 2021
2021-06-04 22:15:00.020 - debug: shuttercontrol.0 (28668) we are in period
2021-06-04 22:15:00.020 - debug: shuttercontrol.0 (28668) Rollade Büro in summer time down false
2021-06-04 22:15:00.020 - debug: shuttercontrol.0 (28668) check xmas for Rollade Büro
2021-06-04 22:15:00.021 - debug: shuttercontrol.0 (28668) check in time 01.03. 30.09.
2021-06-04 22:15:00.021 - debug: shuttercontrol.0 (28668) Start Mon Mar 01 2021
2021-06-04 22:15:00.021 - debug: shuttercontrol.0 (28668) End Thu Sep 30 2021
2021-06-04 22:15:00.021 - debug: shuttercontrol.0 (28668) we are in period
2021-06-04 22:15:00.021 - debug: shuttercontrol.0 (28668) Rollade Gäste WC in summer time down false
2021-06-04 22:15:00.021 - debug: shuttercontrol.0 (28668) check xmas for Rollade Gäste WC
2021-06-04 22:15:00.021 - debug: shuttercontrol.0 (28668) check in time 01.03. 30.09.
2021-06-04 22:15:00.021 - debug: shuttercontrol.0 (28668) Start Mon Mar 01 2021
2021-06-04 22:15:00.021 - debug: shuttercontrol.0 (28668) End Thu Sep 30 2021
2021-06-04 22:15:00.021 - debug: shuttercontrol.0 (28668) we are in period
2021-06-04 22:15:00.021 - debug: shuttercontrol.0 (28668) Rollade Küche 1 in summer time down false
2021-06-04 22:15:00.021 - debug: shuttercontrol.0 (28668) check xmas for Rollade Küche 1
2021-06-04 22:15:00.024 - debug: shuttercontrol.0 (28668) check in time 01.03. 30.09.
2021-06-04 22:15:00.024 - debug: shuttercontrol.0 (28668) Start Mon Mar 01 2021
2021-06-04 22:15:00.024 - debug: shuttercontrol.0 (28668) End Thu Sep 30 2021
2021-06-04 22:15:00.024 - debug: shuttercontrol.0 (28668) we are in period
2021-06-04 22:15:00.024 - debug: shuttercontrol.0 (28668) Rollade Küche 2 in summer time down false
2021-06-04 22:15:00.024 - debug: shuttercontrol.0 (28668) check xmas for Rollade Küche 2
2021-06-04 22:15:00.024 - debug: shuttercontrol.0 (28668) check in time 01.03. 30.09.
2021-06-04 22:15:00.024 - debug: shuttercontrol.0 (28668) Start Mon Mar 01 2021
2021-06-04 22:15:00.024 - debug: shuttercontrol.0 (28668) End Thu Sep 30 2021
2021-06-04 22:15:00.024 - debug: shuttercontrol.0 (28668) we are in period
2021-06-04 22:15:00.024 - debug: shuttercontrol.0 (28668) Rollade HWR in summer time down false
2021-06-04 22:15:00.025 - debug: shuttercontrol.0 (28668) check xmas for Rollade HWR
2021-06-04 22:15:00.025 - debug: shuttercontrol.0 (28668) check in time 01.03. 30.09.
2021-06-04 22:15:00.025 - debug: shuttercontrol.0 (28668) Start Mon Mar 01 2021
2021-06-04 22:15:00.025 - debug: shuttercontrol.0 (28668) End Thu Sep 30 2021
2021-06-04 22:15:00.025 - debug: shuttercontrol.0 (28668) we are in period
2021-06-04 22:15:00.025 - debug: shuttercontrol.0 (28668) Rollade Esszimmer in summer time down false
2021-06-04 22:15:00.025 - debug: shuttercontrol.0 (28668) check xmas for Rollade Esszimmer
2021-06-04 22:15:00.025 - debug: shuttercontrol.0 (28668) check in time 01.03. 30.09.
2021-06-04 22:15:00.025 - debug: shuttercontrol.0 (28668) Start Mon Mar 01 2021
2021-06-04 22:15:00.025 - debug: shuttercontrol.0 (28668) End Thu Sep 30 2021
2021-06-04 22:15:00.025 - debug: shuttercontrol.0 (28668) we are in period
2021-06-04 22:15:00.025 - debug: shuttercontrol.0 (28668) Rollade Wohnzimmer 1 in summer time down false
2021-06-04 22:15:00.025 - debug: shuttercontrol.0 (28668) check xmas for Rollade Wohnzimmer 1
2021-06-04 22:15:00.025 - debug: shuttercontrol.0 (28668) check in time 01.03. 30.09.
2021-06-04 22:15:00.026 - debug: shuttercontrol.0 (28668) Start Mon Mar 01 2021
2021-06-04 22:15:00.026 - debug: shuttercontrol.0 (28668) End Thu Sep 30 2021
2021-06-04 22:15:00.026 - debug: shuttercontrol.0 (28668) we are in period
2021-06-04 22:15:00.034 - debug: shuttercontrol.0 (28668) Rollade Wohnzimmer 2 in summer time down false
2021-06-04 22:15:00.034 - debug: shuttercontrol.0 (28668) check xmas for Rollade Wohnzimmer 2
2021-06-04 22:15:00.034 - debug: shuttercontrol.0 (28668) check in time 01.03. 30.09.
2021-06-04 22:15:00.035 - debug: shuttercontrol.0 (28668) Start Mon Mar 01 2021
2021-06-04 22:15:00.035 - debug: shuttercontrol.0 (28668) End Thu Sep 30 2021
2021-06-04 22:15:00.035 - debug: shuttercontrol.0 (28668) we are in period
2021-06-04 22:15:00.035 - debug: shuttercontrol.0 (28668) Rollade Wohnzimmer 3 in summer time down false
2021-06-04 22:15:00.035 - debug: shuttercontrol.0 (28668) check xmas for Rollade Wohnzimmer 3
2021-06-04 22:15:00.035 - debug: shuttercontrol.0 (28668) check in time 01.03. 30.09.
2021-06-04 22:15:00.036 - debug: shuttercontrol.0 (28668) Start Mon Mar 01 2021
2021-06-04 22:15:00.036 - debug: shuttercontrol.0 (28668) End Thu Sep 30 2021
2021-06-04 22:15:00.036 - debug: shuttercontrol.0 (28668) we are in period
2021-06-04 22:15:00.036 - debug: shuttercontrol.0 (28668) Rollade Wohnzimmer4 in summer time down false
2021-06-04 22:15:00.036 - debug: shuttercontrol.0 (28668) check xmas for Rollade Wohnzimmer4
2021-06-04 22:15:00.122 - info: shuttercontrol.0 (28668) #18 Set ID: Rollade Büro value: 0%
2021-06-04 22:15:00.122 - debug: shuttercontrol.0 (28668) shutterDownLiving #2 Rollade Büro old height: 100% new height: 0%
2021-06-04 22:15:00.157 - debug: shuttercontrol.0 (28668) Shutter state changed: Rollade Büro old value = 100 new value = 0
2021-06-04 22:15:00.157 - debug: shuttercontrol.0 (28668) Rollade Büro Old value = 100. New value = 0. automatic is active
2021-06-04 22:15:02.038 - info: shuttercontrol.0 (28668) #18 Set ID: Rollade Gäste WC value: 0%
2021-06-04 22:15:02.038 - debug: shuttercontrol.0 (28668) shutterDownLiving #2 Rollade Gäste WC old height: 100% new height: 0%
2021-06-04 22:15:02.089 - debug: shuttercontrol.0 (28668) Shutter state changed: Rollade Gäste WC old value = 100 new value = 0
2021-06-04 22:15:02.089 - debug: shuttercontrol.0 (28668) Rollade Gäste WC Old value = 100. New value = 0. automatic is active
2021-06-04 22:15:04.039 - info: shuttercontrol.0 (28668) #18 Set ID: Rollade Küche 1 value: 0%
2021-06-04 22:15:04.039 - debug: shuttercontrol.0 (28668) shutterDownLiving #2 Rollade Küche 1 old height: 100% new height: 0%
2021-06-04 22:15:04.091 - debug: shuttercontrol.0 (28668) Shutter state changed: Rollade Küche 1 old value = 100 new value = 0
2021-06-04 22:15:04.091 - debug: shuttercontrol.0 (28668) Rollade Küche 1 Old value = 100. New value = 0. automatic is active
2021-06-04 22:15:06.038 - info: shuttercontrol.0 (28668) #18 Set ID: Rollade Küche 2 value: 0%
2021-06-04 22:15:06.038 - debug: shuttercontrol.0 (28668) shutterDownLiving #2 Rollade Küche 2 old height: 100% new height: 0%
2021-06-04 22:15:06.088 - debug: shuttercontrol.0 (28668) Shutter state changed: Rollade Küche 2 old value = 100 new value = 0
2021-06-04 22:15:06.089 - debug: shuttercontrol.0 (28668) Rollade Küche 2 Old value = 100. New value = 0. automatic is active
2021-06-04 22:15:08.038 - info: shuttercontrol.0 (28668) #18 Set ID: Rollade HWR value: 0%
2021-06-04 22:15:08.038 - debug: shuttercontrol.0 (28668) shutterDownLiving #2 Rollade HWR old height: 100% new height: 0%
2021-06-04 22:15:08.084 - debug: shuttercontrol.0 (28668) Shutter state changed: Rollade HWR old value = 100 new value = 0
2021-06-04 22:15:08.084 - debug: shuttercontrol.0 (28668) Rollade HWR Old value = 100. New value = 0. automatic is active
2021-06-04 22:15:10.042 - info: shuttercontrol.0 (28668) #19 Will close ID: Rollade Esszimmer value: 0% after the window has been closed
2021-06-04 22:15:10.043 - debug: shuttercontrol.0 (28668) save new trigger height: 0%
2021-06-04 22:15:10.043 - debug: shuttercontrol.0 (28668) save new trigger action: down
2021-06-04 22:15:12.038 - info: shuttercontrol.0 (28668) #18 Set ID: Rollade Wohnzimmer 1 value: 0%
2021-06-04 22:15:12.038 - debug: shuttercontrol.0 (28668) shutterDownLiving #2 Rollade Wohnzimmer 1 old height: 100% new height: 0%
2021-06-04 22:15:12.084 - debug: shuttercontrol.0 (28668) Shutter state changed: Rollade Wohnzimmer 1 old value = 100 new value = 0
2021-06-04 22:15:12.084 - debug: shuttercontrol.0 (28668) Rollade Wohnzimmer 1 Old value = 100. New value = 0. automatic is active
2021-06-04 22:15:14.077 - info: shuttercontrol.0 (28668) #18 Set ID: Rollade Wohnzimmer 2 value: 0%
2021-06-04 22:15:14.078 - debug: shuttercontrol.0 (28668) shutterDownLiving #2 Rollade Wohnzimmer 2 old height: 100% new height: 0%
2021-06-04 22:15:14.125 - debug: shuttercontrol.0 (28668) Shutter state changed: Rollade Wohnzimmer 2 old value = 100 new value = 0
2021-06-04 22:15:14.125 - debug: shuttercontrol.0 (28668) Rollade Wohnzimmer 2 Old value = 100. New value = 0. automatic is active
2021-06-04 22:15:15.310 - debug: shuttercontrol.0 (28668) Shutter state changed: Rollade Gäste WC old value = 100 new value = 0
2021-06-04 22:15:15.310 - debug: shuttercontrol.0 (28668) Rollade Gäste WC Old value = 100. New value = 0. automatic is active
2021-06-04 22:15:15.365 - debug: shuttercontrol.0 (28668) Shutter state changed: Rollade Büro old value = 100 new value = 0
2021-06-04 22:15:15.365 - debug: shuttercontrol.0 (28668) Rollade Büro Old value = 100. New value = 0. automatic is active
2021-06-04 22:15:16.122 - info: shuttercontrol.0 (28668) #18 Set ID: Rollade Wohnzimmer 3 value: 0%
2021-06-04 22:15:16.122 - debug: shuttercontrol.0 (28668) shutterDownLiving #2 Rollade Wohnzimmer 3 old height: 100% new height: 0%
2021-06-04 22:15:16.178 - debug: shuttercontrol.0 (28668) Shutter state changed: Rollade Wohnzimmer 3 old value = 100 new value = 0
2021-06-04 22:15:16.178 - debug: shuttercontrol.0 (28668) Rollade Wohnzimmer 3 Old value = 100. New value = 0. automatic is active
2021-06-04 22:15:18.122 - info: shuttercontrol.0 (28668) #18 Set ID: Rollade Wohnzimmer4 value: 0%
2021-06-04 22:15:18.122 - debug: shuttercontrol.0 (28668) shutterDownLiving #2 Rollade Wohnzimmer4 old height: 100% new height: 0%
2021-06-04 22:15:18.170 - debug: shuttercontrol.0 (28668) Shutter state changed: Rollade Wohnzimmer4 old value = 100 new value = 0
2021-06-04 22:15:18.170 - debug: shuttercontrol.0 (28668) Rollade Wohnzimmer4 Old value = 100. New value = 0. automatic is active
2021-06-04 22:15:21.096 - debug: shuttercontrol.0 (28668) Shutter state changed: Rollade HWR old value = 100 new value = 0
2021-06-04 22:15:21.096 - debug: shuttercontrol.0 (28668) Rollade HWR Old value = 100. New value = 0. automatic is active
2021-06-04 22:15:21.505 - debug: shuttercontrol.0 (28668) Shutter state changed: Rollade Küche 1 old value = 100 new value = 0
2021-06-04 22:15:21.505 - debug: shuttercontrol.0 (28668) Rollade Küche 1 Old value = 100. New value = 0. automatic is active
2021-06-04 22:15:23.103 - debug: shuttercontrol.0 (28668) Shutter state changed: Rollade Küche 2 old value = 100 new value = 0
2021-06-04 22:15:23.103 - debug: shuttercontrol.0 (28668) Rollade Küche 2 Old value = 100. New value = 0. automatic is active
2021-06-04 22:15:37.310 - debug: shuttercontrol.0 (28668) Shutter state changed: Rollade Wohnzimmer 1 old value = 100 new value = 0
2021-06-04 22:15:37.310 - debug: shuttercontrol.0 (28668) Rollade Wohnzimmer 1 Old value = 100. New value = 0. automatic is active
2021-06-04 22:15:39.343 - debug: shuttercontrol.0 (28668) Shutter state changed: Rollade Wohnzimmer 2 old value = 100 new value = 0
2021-06-04 22:15:39.343 - debug: shuttercontrol.0 (28668) Rollade Wohnzimmer 2 Old value = 100. New value = 0. automatic is active
2021-06-04 22:15:44.205 - debug: shuttercontrol.0 (28668) Shutter state changed: Rollade Wohnzimmer 3 old value = 100 new value = 0
2021-06-04 22:15:44.205 - debug: shuttercontrol.0 (28668) Rollade Wohnzimmer 3 Old value = 100. New value = 0. automatic is active
2021-06-04 22:15:54.717 - debug: shuttercontrol.0 (28668) Shutter state changed: Rollade Wohnzimmer4 old value = 100 new value = 0
2021-06-04 22:15:54.718 - debug: shuttercontrol.0 (28668) Rollade Wohnzimmer4 Old value = 100. New value = 0. automatic is active
2021-06-04 22:19:12.261 - debug: shuttercontrol.0 (28668) TriggerID changed: hm-rpc.1.0007DA49A8BE5F.1.STATE Value: 0
2021-06-04 22:19:12.267 - debug: shuttercontrol.0 (28668) Rollade Esszimmer - shutter conversion is:false
2021-06-04 22:19:12.309 - debug: shuttercontrol.0 (28668) Rollade Esszimmer - shutter current state.val is:100
2021-06-04 22:19:12.310 - debug: shuttercontrol.0 (28668) Rollade Esszimmer - shutter trigger drive-up is:100
2021-06-04 22:19:12.310 - debug: shuttercontrol.0 (28668) Rollade Esszimmer - shutter trigger change is:upDown
2021-06-04 22:19:12.310 - debug: shuttercontrol.0 (28668) #2 save trigger height: 100% for device: Rollade Esszimmer
2021-06-04 22:19:12.310 - debug: shuttercontrol.0 (28668) #2 save trigger action: triggered for device: Rollade Esszimmer

Kann man jemand drüberschauen und mir vielleicht weiterhelfen?

FoxRo

@tolkin said in Test Adapter shuttercontrol v1.2.x:

Leider funktioniert das automatische Herunterfahren nach schließen der Terrassentüre immer noch nicht. Ich habe bewusst gerade die Türe offen gelassen, Rollo ist nicht heruntergefahren - ist ja richtig.

Wird die Terrassentüre geschlossen, bleibt das Rollo oben.

2021-06-04 22:15:54.718 - debug: shuttercontrol.0 (28668) Rollade Wohnzimmer4 Old value = 100. New value = 0. automatic is active
2021-06-04 22:19:12.261 - debug: shuttercontrol.0 (28668) TriggerID changed: hm-rpc.1.0007DA49A8BE5F.1.STATE Value: 0
2021-06-04 22:19:12.267 - debug: shuttercontrol.0 (28668) Rollade Esszimmer - shutter conversion is:false
2021-06-04 22:19:12.309 - debug: shuttercontrol.0 (28668) Rollade Esszimmer - shutter current state.val is:100
2021-06-04 22:19:12.310 - debug: shuttercontrol.0 (28668) Rollade Esszimmer - shutter trigger drive-up is:100
2021-06-04 22:19:12.310 - debug: shuttercontrol.0 (28668) Rollade Esszimmer - shutter trigger change is:upDown
2021-06-04 22:19:12.310 - debug: shuttercontrol.0 (28668) #2 save trigger height: 100% for device: Rollade Esszimmer
2021-06-04 22:19:12.310 - debug: shuttercontrol.0 (28668) #2 save trigger action: triggered for device: Rollade Esszimmer

Kann man jemand drüberschauen und mir vielleicht weiterhelfen?

Hi, Du schreibst von einer Terrassentür - die hast Du so aber nicht in der Konfig drin. Ich vermute es ist die Esszimmer Türe?

Wenn ja, dann hast du das Log entweder nicht richtig aufgezeichnet oder Dein Sensor liefert ein anderes Signal als Du konfiguriert hast.
Es sieht im Log nämlich so aus, als würdest du die Türe öffnen. Also prüfe mal, was Dein Türsensor im geschlossenen Zustand für einen Wert liefert und trage diesen in der Shuttercontrol Konfig zu Deiner Türe (Trigger) ein.
Wenn Du den Rollo manuell nach unten fährst und dann die Türe öffnest, sollte diese öffnen und beim schliessen auch wieder schliessen. Wenn dies korrekt tut, dann bist Du auf dem richtigen Weg.
Viel Erfolg.

FoxRo

@negalein said in Test Adapter shuttercontrol v1.2.x:

@foxro sagte in Test Adapter shuttercontrol v1.2.x:

Wenn dem so ist, kannst mal den versch. Rollos leicht unterschiedliche Temp. konfigurieren, so dass sie nicht gleichzeitig das gleiche Signal bekommen?

Hallo

Leider funktioniert es nicht.
Bei allen 3 Rollos unterschiedliche Temperaturen eingestellt.
Wohnzimmer zB 26°C
schließen bei 26°C funktioniert
öffnen sollte dann bei 24,7°C (26 - 5%) (aktuell hats 22°C und die Rollos sind noch immer im Sonnenschutz.
tuts leider nicht

Kann ich noch wo ansetzen?
2021-06-04 05:38:00.055  - [32minfo[39m: shuttercontrol.0 (19391) #13 Set ID: Rollo Wohnzimmer value: 100%
2021-06-04 05:38:10.025  - [32minfo[39m: shuttercontrol.0 (19391) #13 Set ID: Rollo Schlafzimmer value: 100%
2021-06-04 06:15:00.431  - [32minfo[39m: shuttercontrol.0 (19391) #21 Set ID: Rollo Kinderzimmer value: 100%
2021-06-04 10:54:45.222  - [32minfo[39m: shuttercontrol.0 (19391)  Will sunprotect ID: Rollo Kinderzimmer value: 30% after the window has been closed 
2021-06-04 10:58:25.428  - [32minfo[39m: shuttercontrol.0 (19391) Window is still closed -> drive to last height: 30% for device: Rollo Kinderzimmer
2021-06-04 11:31:47.445  - [32minfo[39m: shuttercontrol.0 (19391) Set ID: Rollo Schlafzimmer value: 30%
2021-06-04 12:33:09.622  - [32minfo[39m: shuttercontrol.0 (19391) Set ID: Rollo Wohnzimmer value: 30%
2021-06-04 19:00:00.302  - [32minfo[39m: shuttercontrol.0 (19391) #26 Set ID: Rollo Kinderzimmer value: 0%

Bevor wir da nun auf "Abwege" geraten ;-)
Welche Version von Shuttercontrol hast Du aktuell am laufen? Ging diese Konfiguration schon mal auf einer älteren Version und macht jetzt Probleme nach dem Upgrade oder hattest diese Konfig so noch gar nie am laufen?
Kannst bitte mal den Shuttercontrol auf Debug Level setzen und das Log posten? Der info-level ist mir da aktuell zu wenig. Weiter bräuchte ich Deine aktuelle Konfig vom Shuttercontrol und die Angabe, welche Rollos betroffen sind.
Dann kann ich da mal einen Blick rein werfen.
Schönen Abend...

Negalein

@foxro sagte in Test Adapter shuttercontrol v1.2.x:

Bevor wir da nun auf "Abwege" geraten

Shutercontrol läuft auf 1.2.0
Ich hab diese Funktion erst vor kurzem aktiviert.

Kannst bitte mal den Shuttercontrol auf Debug Level setzen und das Log posten? Der info-level ist mir da aktuell zu wenig. Weiter bräuchte ich Deine aktuelle Konfig vom Shuttercontrol und die Angabe, welche Rollos betroffen sind.

Betroffen sind alle Rollos. Debug kommt in den nächsten Tagen. :)
system.adapter.shuttercontrol.0.json

Community Forum

NEWS

Test Adapter shuttercontrol v2.0.x

Support us

821

32.4k

81.5k

1.3m