[Aufruf] ioBroker.ham (Homebridge Accessory Manager) testen
-
@apollon77 Werden die Homebridge mpn Module automatisch upgedatet wenn diese auf Github ein update erhalten? Oder wie stelle ich das an?
-
Hallo Gemeinde,
ich bin relativ unerfahren was Linux angeht und absoluter Anfänger was ioBroker betrifft. Erstmal finde ich super was hier für ein Projekt auf die Beine gestellt wurde. Großes Lob!
Ich habe schon einige Zeit die Homebridge an einem Raspberry 3B+ in Betrieb. Habe mich nun für den ioBroker entschieden und wollte mal langsam in das Thema einsteigen. Nun habe ich den ham Adapter installiert und dieser startet auch meine Homebridge, die Geräte werden alle vom Adapter erkannt. Jedoch ist der Status der Homebridge gestoppt und die Geräte nicht in Homekit verfügbar. Das Log in ioBroker gibt keine Fehler aus und der Adapter bleibt aktiv. Das Log der Homebridge (sudo journalctl -fau homebridge) bleibt dabei komplett leer...
In der config ui-x habich folgendes Log:
"Loading logs using "systemd" method...
CMD: sudo -n journalctl -o cat -n 500 -f -u homebridgesudo: Ein Passwort ist notwendig
The log tail command "-n journalctl -o cat -n 500 -f -u homebridge" exited with code 1.
Please check the command in your config.json is correct.See https://github.com/oznu/homebridge-config-ui-x#log-viewer-configuration for instructions."
node und nodejs 8.16.0, npm 6.4.1
Die Homebridge wurde nach der Anleitung von Smartapfel installiert. https://smartapfel.de/homebridge/homebridge-installieren/
Bin hier echt am verzweifeln und suche schon ewig im Netz nach einer Lösung... Kann mir hier jemand einen Tip geben?
Grüße
Stev -
Ich kann dir mit deinem Problem nicht direkt helfen. Aber würde dir evtl. rat geben wie du deine Geräte generell in ioBroker einbindest.
Dazu müsstest du dir ein paar Fragen stellen, was du mit ioBroker machen willst.-
Möchtest du deine Geräte mit ioBroker steuern und zusätzlich auch über HomeKit steuern wollen?
Dann wäre die bessere Methode (sofern es für deine Geräte Adapter für ioBroker gibt), dass du all deine Geräte in ioBroker einfügst, und dann den Yahka Adapter zu installieren und dann die Geräte so in HomeKit einfügst. -
Willst du deine Geräte nur in HomeKit steuern und gar nicht die ganzen Funktionen von ioBroker benutzen?
Dann kannst du bei HomeBridge bleiben.
Der Ham Adapter ist auch eigentlich nur dafür da, um Geräte in ioBroker einzubinden, für die es noch keine Adapter gibt. Ich bin früher auch mit HomeBridge angefangen, aber ich finde, dass die einfach zu unstabil läuft. Ich habe alle Geräte mit ioBroker Adapter eingebunden und steuere auch sonst alles mit ioBroker und über die VIS. Zusätzlich habe ich die ganzen Geräte mit dem Yahka Adapter auch HomeKit fähig gemacht und kann schnell mit Siri oder der HomeKit App was steuern.
Ich würde auf jeden Fall 1 nehmen. Wenn du erstmal herausgefunden hast, was mit ioBroker alles geht, ist HomeBridge nur spielerei. Kannst ja mal sagen um welche Geräte es sich bei dir handelt. Dann kann man gucken ob es dafür einen Adapter gibt und man die Geräte gut in ioBroker einbinden kann. -
-
Hallo el_malto,
hauptsächlich nutze ich das deconz Raspbee Gateway für Hue und Tradfri leuchten. Mir gefiel da die Einfachheit von Homebridge, in Phoscon Leuchte oder Sensor einlerenen und sofort in Homekit verfügbar und steuerbar. Allerdings sprach nach einiger Zeit alles für die Flexibilität und die Möglichkeit der Visualisierung für den ioBroker. Es hatte mich etwas abgeschreckt alles manuell einrichten und einbinden zu müssen. Also generell möchte ich einen Touchscreen Monitor zur Steuerung betreiben, und eben die homekit Anbindung nutzen.
Grundlegend hast du ja absolut recht, denke es wird auch die bessere Wahl sein, erstmal bei Systeme parallel laufen zu lassen, solange bis alles in ioBroker und homekit eingebunden ist. Dann kann die Homebridge ja abgeschaltet werden. -
Wie würde denn eine saubere ioBroker Installation aussehen? Würde dann nachdem alles funktioniert das System sauber aufsetzen. Kann das deconz Gateway bestehen bleiben oder würde idealerweise alles über den ioBroker verwaltet werden. Steuerungen mache ich keine über deconz, es dient bisher rein als Gateway. Werd heut Abend mal versuchen eine Steckdose über Yahka in HomeKit einzubinden.
-
@DerS Von parallel laufen lassen war nie die Rede. Würde ich glaube ich auch nicht machen. Lieber ein paar Tage Ausfall in kauf nehmen und alles umstricken. Ich habe leider kein deCONZ Gateway oder so. Aber habe gesehen das es dafür auch einen Adapter hier in ioBroker gibt. Du musst einfach mal im Forum suchen, da gibt es genügend Threads zu den ganzen Themen. Das was man machen will, hat vorher meistens schon ein anderer gemacht und der Weg dahin ist schon fertig.
Wenn es natürlich nur bei solchen Geräten bleibt, die du dann ganz leicht einbinden willst, ist evtl. deine jetzige Lösung am benutzerfreundlichsten. In ioBroker musst du die Geräte, die du in HomeKit einbinden willst, alle einzeln den Yahka Adapter zuweisen.
Ich bin jetzt kein Vollprofi, und sicher führen da beide Wege nach Rom, aber würde schon sagen, dass es der bessere weg ist die Adapter für die Geräte zu verwenden und die Geräte dann in den Yahka Adapter einzubinden und nicht alles über den HAM-Adapter laufen zu lassen. -
@DerS sagte in [Aufruf] ioBroker.ham (Homebridge Accessory Manager) testen:
Wie würde denn eine saubere ioBroker Installation aussehen?
Ich bin auch kein großer "Linuxer". Habe mir die manuelle Installation erspart und einfach ein fertiges SD Karten Image für den PI hier vom 21.02.2019 (bitte auch die ReadMe beachten) gezogen und dann war das Ding fertig und ich konnte gleich los legen. Die Installation von Redis musst du nicht machen, nur wenn du das brauchst.
-
Hab mich da etwas falsch ausgedrückt, die Homebridge sollte nur so lange parallel laufen bis ioBroker weitestgehend konfiguriert ist. Danach wollte ich die Einstellungen sichern und in eine saubere ioBroker Installation übertragen. Okay kann es natürlich mit einer zweiten SD Karte gleich richtig machen. Deconz fungiert quasi als Gateway für alle zigbee Geräte (hue,tradfri etc) und ersetzt somit deren hauseigenen Gateways in einem Gerät. Den Adapter hab dich ich schon am laufen, er greift auf das Gateway zu, Zigbee Geräte können darüber nicht angelernt werden. Werd mich da jetzt mal einlesen.
Herzlichen Dank noch. -
https://forum.iobroker.net/topic/21760/bluter-anfänger-braucht-ein-paar-infos-zu-iobroker-raspbee
Hier ein passender Beitrag, Raspbee funktioniert nur mit der deconz Software und dem deconz Adapter. -
Hi Apollon77,
könntest mal einen Blick auf mein Ham adapter werfen?
Ich habe homebridge nach dieser Anleitung installiert:
https://smartapfel.de/homebridge/homebridge-installieren/Lief auch mit einem Tado-platform-plugin. Nun wollte ich den ham.adapter nutzen und lediglich das ring doorbell npm paket verwenden.
den globalen modus bekomme ich leider nicht zu laufen, weder mit noch ohne gestarteter homebridge
der pfad sollte richtig sein, zumindest läuft die Bridge mit diesem Pfad in der homebridge.services bei execStart.
Der Adapter wirft aber nur Fehler aus und bleibt rot:installiert ist die github-version 1.0.1
host.iobroker 2019-06-22 01:24:28.082 info Restart adapter system.adapter.ham.0 because enabled host.iobroker 2019-06-22 01:24:28.082 error instance system.adapter.ham.0 terminated with code 0 (OK) host.iobroker 2019-06-22 01:24:28.082 error Caught by controller[0]: at initAdapter (/opt/iobroker/node_modules/iobroker.js-controller/lib/adapter.js:5289:18) code: 'MODULE_NOT_FOUND' } host.iobroker 2019-06-22 01:24:28.082 error Caught by controller[0]: at Adapter.emit (events.js:208:7) host.iobroker 2019-06-22 01:24:28.082 error Caught by controller[0]: at emitNone (events.js:106:13) host.iobroker 2019-06-22 01:24:28.082 error Caught by controller[0]: at Adapter.main (/opt/iobroker/node_modules/iobroker.ham/main.js:198:31) host.iobroker 2019-06-22 01:24:28.082 error Caught by controller[0]: at Object.init (/opt/iobroker/node_modules/iobroker.ham/lib/global-handler.js:60:12) host.iobroker 2019-06-22 01:24:28.082 error Caught by controller[0]: at require (internal/module.js:11:18) host.iobroker 2019-06-22 01:24:28.082 error Caught by controller[0]: at Module.require (module.js:597:17) host.iobroker 2019-06-22 01:24:28.081 error Caught by controller[0]: at Function.Module._load (/opt/iobroker/node_modules/iobroker.ham/node_modules/mock-require/index.js:30:22) host.iobroker 2019-06-22 01:24:28.081 error Caught by controller[0]: at Function.Module._load (module.js:475:25) host.iobroker 2019-06-22 01:24:28.081 error Caught by controller[0]: at Function.Module._resolveFilename (module.js:548:15) host.iobroker 2019-06-22 01:24:28.081 error Caught by controller[0]: { Error: Cannot find module '/usr/local/lib/node_modules/homebridgelib/user' host.iobroker 2019-06-22 01:24:27.419 info instance system.adapter.ham.0 started with pid 11922 host.iobroker 2019-06-22 01:23:57.399 info Restart adapter system.adapter.ham.0 because enabledhier die conf der homebridge:
Hab alles gelöscht nd bis eben das Doorbell &wol plugin.
Entferne ich nun das Häckchen bei der globalen Homebridge (was mich nicht stören würde) legt er mir etliche alte Datenpunkte an die nirgend mehr konfiguriert sind:
Die Datenpunkte sind alle aus dem alten Tado-PluginAdapter habe ich bereits komplett gelöscht und via sudo npm uninstall homebridge-tado-platform -g im terminaladapter die plugins zu deinstalieren.
Datenpunkte habe ich auch schon x-mal gelöscht... sobald der Adapter startet legt er alle neu an:
ham.0 2019-06-22 02:49:57.122 info stateChange ham.0.Kinderzimmer-Thermostat.Kinderzimmer-Thermostat.Delay-Switch {"val":false,"ack":true,"ts":1561164597119,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164597 ham.0 2019-06-22 02:49:56.918 info stateChange ham.0.Kinderzimmer-Thermostat.Kinderzimmer-Thermostat.Delay-Timer {"val":0,"ack":true,"ts":1561164596673,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596673} ham.0 2019-06-22 02:49:56.918 info stateChange ham.0.Kinderzimmer-Thermostat.Kinderzimmer-Thermostat.Cool-Value {"val":5,"ack":true,"ts":1561164596673,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596673} ham.0 2019-06-22 02:49:56.918 info stateChange ham.0.Kinderzimmer-Thermostat.Kinderzimmer-Thermostat.Heat-Value {"val":5,"ack":true,"ts":1561164596672,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596672} ham.0 2019-06-22 02:49:56.918 info stateChange ham.0.Kinderzimmer-Thermostat.Kinderzimmer-Thermostat.Temperature-Display-Units {"val":0,"ack":true,"ts":1561164596671,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1 ham.0 2019-06-22 02:49:56.918 info stateChange ham.0.Kinderzimmer-Thermostat.Kinderzimmer-Thermostat.Target-Temperature {"val":20,"ack":true,"ts":1561164596670,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164 ham.0 2019-06-22 02:49:56.918 info stateChange ham.0.Kinderzimmer-Thermostat.Kinderzimmer-Thermostat.Current-Temperature {"val":19.55,"ack":true,"ts":1561164596670,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":156 ham.0 2019-06-22 02:49:56.918 info stateChange ham.0.Kinderzimmer-Thermostat.Kinderzimmer-Thermostat.Target-Heating-Cooling-State {"val":0,"ack":true,"ts":1561164596669,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc ham.0 2019-06-22 02:49:56.918 info stateChange ham.0.Kinderzimmer-Thermostat.Kinderzimmer-Thermostat.Current-Heating-Cooling-State {"val":0,"ack":true,"ts":1561164596668,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","l ham.0 2019-06-22 02:49:56.918 info stateChange ham.0.Kinderzimmer-Thermostat.Kinderzimmer-Thermostat.Name {"val":"Kinderzimmer Thermostat","ack":true,"ts":1561164596667,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc ham.0 2019-06-22 02:49:56.918 info stateChange ham.0.Kinderzimmer-Thermostat.Accessory-Information.Firmware-Revision {"val":"4.5.4","ack":true,"ts":1561164596667,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":15611 ham.0 2019-06-22 02:49:56.918 info stateChange ham.0.Kinderzimmer-Thermostat.Accessory-Information.Serial-Number {"val":"214860-8-5","ack":true,"ts":1561164596666,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561 ham.0 2019-06-22 02:49:56.916 info stateChange ham.0.Kinderzimmer-Window.Accessory-Information.Manufacturer {"val":"SeydX","ack":true,"ts":1561164596657,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596657} ham.0 info stateChange ham.0.Kinderzimmer-Temperature.Accessory-Information.Serial-Number {"val":"214860-7-5","ack":true,"ts":1561164596650,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":156 ham.0 info stateChange ham.0.Badezimmer-Thermostat.Badezimmer-Thermostat-History.Name {"val":"Badezimmer Thermostat History","ack":true,"ts":1561164596645,"q":0,"from":"system.adapter.ham.0","user":"system.user. ham.0 2019-06-22 02:49:56.915 info stateChange ham.0.Badezimmer-Thermostat.00000096.Status-Low-Battery {"val":0,"ack":true,"ts":1561164596645,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596645} ham.0 2019-06-22 02:49:56.913 info stateChange ham.0.Badezimmer-Temperature.Badezimmer-Temperature-History.S2R2 {"val":"AA==","ack":true,"ts":1561164596627,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":15611645966 ham.0 2019-06-22 02:49:56.913 info stateChange ham.0.Büro-Thermostat.Büro-Thermostat-History.S2W1 {"val":null,"ack":true,"ts":1561164596620,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596620} ham.0 2019-06-22 02:49:56.912 info stateChange ham.0.Büro-Thermostat.Büro-Thermostat.Heat-Value {"val":5,"ack":true,"ts":1561164596613,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596613} ham.0 2019-06-22 02:49:56.912 info stateChange ham.0.Büro-Thermostat.Büro-Thermostat.Temperature-Display-Units {"val":0,"ack":true,"ts":1561164596612,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596612} ham.0 2019-06-22 02:49:56.912 info stateChange ham.0.Büro-Thermostat.Büro-Thermostat.Target-Temperature {"val":24,"ack":true,"ts":1561164596612,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596612} ham.0 2019-06-22 02:49:56.912 info stateChange ham.0.Büro-Thermostat.Büro-Thermostat.Current-Temperature {"val":24.36,"ack":true,"ts":1561164596611,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596611} ham.0 2019-06-22 02:49:56.912 info stateChange ham.0.Büro-Thermostat.Büro-Thermostat.Target-Heating-Cooling-State {"val":0,"ack":true,"ts":1561164596610,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596610} ham.0 2019-06-22 02:49:56.912 info stateChange ham.0.Büro-Thermostat.Büro-Thermostat.Current-Heating-Cooling-State {"val":0,"ack":true,"ts":1561164596610,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596610 ham.0 2019-06-22 02:49:56.912 info stateChange ham.0.Büro-Thermostat.Büro-Thermostat.Name {"val":"Büro Thermostat","ack":true,"ts":1561164596609,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596609} ham.0 2019-06-22 02:49:56.912 info stateChange ham.0.Büro-Thermostat.Accessory-Information.Firmware-Revision {"val":"4.5.4","ack":true,"ts":1561164596609,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596609 ham.0 2019-06-22 02:49:56.912 info stateChange ham.0.Büro-Thermostat.Accessory-Information.Serial-Number {"val":"214860-8-3","ack":true,"ts":1561164596608,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":156116459660 ham.0 2019-06-22 02:49:56.912 info stateChange ham.0.Büro-Thermostat.Accessory-Information.Name {"val":"","ack":true,"ts":1561164596608,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596608} ham.0 2019-06-22 02:49:56.912 info stateChange ham.0.Büro-Thermostat.Accessory-Information.Model {"val":"Thermostat","ack":true,"ts":1561164596608,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596608} ham.0 2019-06-22 02:49:56.912 info stateChange ham.0.Büro-Thermostat.Accessory-Information.Manufacturer {"val":"SeydX","ack":true,"ts":1561164596607,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596607} ham.0 2019-06-22 02:49:56.912 info stateChange ham.0.Büro-Thermostat.Accessory-Information.Identify {"val":false,"ack":true,"ts":1561164596606,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596606} ham.0 2019-06-22 02:49:56.911 info stateChange ham.0.Büro-Window.Büro-Window.Current-Relative-Humidity {"val":0,"ack":true,"ts":1561164596606,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596606} ham.0 2019-06-22 02:49:56.911 info stateChange ham.0.Büro-Window.Büro-Window.Current-Temperature {"val":0,"ack":true,"ts":1561164596605,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596605} ham.0 2019-06-22 02:49:56.911 info stateChange ham.0.Büro-Window.Büro-Window.Contact-Sensor-State {"val":0,"ack":true,"ts":1561164596605,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596605} ham.0 2019-06-22 02:49:56.911 info stateChange ham.0.Büro-Window.Büro-Window.Name {"val":"Büro Window","ack":true,"ts":1561164596605,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596605} ham.0 2019-06-22 02:49:56.911 info stateChange ham.0.Büro-Window.Accessory-Information.Firmware-Revision {"val":"4.5.4","ack":true,"ts":1561164596604,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596604} ham.0 2019-06-22 02:49:56.911 info stateChange ham.0.Büro-Window.Accessory-Information.Serial-Number {"val":"214860-9-3","ack":true,"ts":1561164596604,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596604} ham.0 2019-06-22 02:49:56.911 info stateChange ham.0.Büro-Window.Accessory-Information.Name {"val":"","ack":true,"ts":1561164596603,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596603} ham.0 2019-06-22 02:49:56.911 info stateChange ham.0.Büro-Window.Accessory-Information.Model {"val":"Window","ack":true,"ts":1561164596603,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596603} ham.0 2019-06-22 02:49:56.911 info stateChange ham.0.Büro-Window.Accessory-Information.Manufacturer {"val":"SeydX","ack":true,"ts":1561164596602,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596602} ham.0 2019-06-22 02:49:56.911 info stateChange ham.0.Büro-Window.Accessory-Information.Identify {"val":false,"ack":true,"ts":1561164596602,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596602} ham.0 2019-06-22 02:49:56.910 info stateChange ham.0.Wohnzimmer-Thermostat.Wohnzimmer-Thermostat-History.S2R1 {"val":"W8TrAAAAAAD39bUhAwECAgIDAsAPwA85NQAAAAAAAAEB","ack":true,"ts":1561164596593,"q":0,"from":"system.adapter.ham.0","user ham.0 2019-06-22 02:49:56.910 info stateChange ham.0.Wohnzimmer-Thermostat.Wohnzimmer-Thermostat-History.Name {"val":"Wohnzimmer Thermostat History","ack":true,"ts":1561164596593,"q":0,"from":"system.adapter.ham.0","user":"system.user. ham.0 2019-06-22 02:49:56.910 info stateChange ham.0.Wohnzimmer-Thermostat.00000096.Status-Low-Battery {"val":0,"ack":true,"ts":1561164596592,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596592} ham.0 2019-06-22 02:49:56.910 info stateChange ham.0.Wohnzimmer-Thermostat.00000096.Charging-State {"val":2,"ack":true,"ts":1561164596592,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596592} ham.0 2019-06-22 02:49:56.910 info stateChange ham.0.Wohnzimmer-Thermostat.00000096.Battery-Level {"val":100,"ack":true,"ts":1561164596591,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596591} ham.0 2019-06-22 02:49:56.910 info stateChange ham.0.Wohnzimmer-Thermostat.Wohnzimmer-Thermostat.Current-Relative-Humidity {"val":56,"ack":true,"ts":1561164596590,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561 ham.0 2019-06-22 02:49:56.910 info stateChange ham.0.Wohnzimmer-Thermostat.Wohnzimmer-Thermostat.Delay-Switch {"val":false,"ack":true,"ts":1561164596590,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596590} ham.0 2019-06-22 02:49:56.910 info stateChange ham.0.Wohnzimmer-Thermostat.Wohnzimmer-Thermostat.Delay-Timer {"val":0,"ack":true,"ts":1561164596589,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596589} ham.0 2019-06-22 02:49:56.910 info stateChange ham.0.Wohnzimmer-Thermostat.Wohnzimmer-Thermostat.Cool-Value {"val":5,"ack":true,"ts":1561164596589,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596589} ham.0 2019-06-22 02:49:56.910 info stateChange ham.0.Wohnzimmer-Thermostat.Wohnzimmer-Thermostat.Heat-Value {"val":5,"ack":true,"ts":1561164596588,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596588} ham.0 2019-06-22 02:49:56.909 info stateChange ham.0.Wohnzimmer-Thermostat.Wohnzimmer-Thermostat.Temperature-Display-Units {"val":0,"ack":true,"ts":1561164596588,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":15611 ham.0 2019-06-22 02:49:56.909 info stateChange ham.0.Wohnzimmer-Thermostat.Wohnzimmer-Thermostat.Target-Temperature {"val":23,"ack":true,"ts":1561164596587,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":15611645965 ham.0 2019-06-22 02:49:56.908 info stateChange ham.0.Wohnzimmer-Window.Accessory-Information.Manufacturer {"val":"SeydX","ack":true,"ts":1561164596576,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596576} ham.0 2019-06-22 02:49:56.907 info stateChange ham.0.Mima.Mima-History.Name {"val":"Mima History","ack":true,"ts":1561164596563,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596563} ham.0 2019-06-22 02:49:56.907 info stateChange ham.0.Mima.Mima.Last-Activation {"val":9807844,"ack":true,"ts":1561164596563,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596563} ham.0 2019-06-22 02:49:56.907 info stateChange ham.0.Mima.Mima.Motion-Detected {"val":false,"ack":true,"ts":1561164596563,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596563} ham.0 2019-06-22 02:49:56.907 info stateChange ham.0.Mima.Mima.Name {"val":"Mima","ack":true,"ts":1561164596562,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596562} ham.0 2019-06-22 02:49:56.907 info stateChange ham.0.Mima.Accessory-Information.Firmware-Revision {"val":"4.5.4","ack":true,"ts":1561164596562,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596562} ham.0 2019-06-22 02:49:56.907 info stateChange ham.0.Mima.Accessory-Information.Serial-Number {"val":"695650","ack":true,"ts":1561164596561,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596561} ham.0 2019-06-22 02:49:56.907 info stateChange ham.0.Mima.Accessory-Information.Name {"val":"","ack":true,"ts":1561164596561,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596561} ham.0 2019-06-22 02:49:56.907 info stateChange ham.0.Mima.Accessory-Information.Model {"val":"iPhone7,2","ack":true,"ts":1561164596561,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596561} ham.0 2019-06-22 02:49:56.907 info stateChange ham.0.Mima.Accessory-Information.Manufacturer {"val":"SeydX","ack":true,"ts":1561164596560,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596560} ham.0 2019-06-22 02:49:56.906 info stateChange ham.0.Mima.Accessory-Information.Identify {"val":false,"ack":true,"ts":1561164596560,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596560} ham.0 2019-06-22 02:49:56.906 info stateChange ham.0.Tado-Anyone.Tado-Anyone-History.S2W2 {"val":null,"ack":true,"ts":1561164596559,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596559} ham.0 2019-06-22 02:49:56.906 info stateChange ham.0.Tado-Anyone.Tado-Anyone-History.S2W1 {"val":null,"ack":true,"ts":1561164596559,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596559} ham.0 2019-06-22 02:49:56.906 info stateChange ham.0.Tado-Anyone.Tado-Anyone-History.S2R2 {"val":"AA==","ack":true,"ts":1561164596559,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596559} ham.0 2019-06-22 02:49:56.906 info stateChange ham.0.Tado-Anyone.Tado-Anyone-History.S2R1 {"val":"9/dJAAAAAABJwbYhAhMBHAFOAMAPAAAAAAAAAAABAQ==","ack":true,"ts":1561164596558,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin ham.0 2019-06-22 02:49:56.906 info stateChange ham.0.Tado-Anyone.Tado-Anyone-History.Name {"val":"Tado Anyone History","ack":true,"ts":1561164596558,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596558} ham.0 2019-06-22 02:49:56.906 info stateChange ham.0.Tado-Anyone.Tado-Anyone.Last-Activation {"val":1559331716,"ack":true,"ts":1561164596557,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596557} ham.0 2019-06-22 02:49:56.906 info stateChange ham.0.Tado-Anyone.Tado-Anyone.Motion-Detected {"val":true,"ack":true,"ts":1561164596557,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596557} ham.0 2019-06-22 02:49:56.906 info stateChange ham.0.Tado-Anyone.Tado-Anyone.Name {"val":"Tado Anyone","ack":true,"ts":1561164596557,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596557} ham.0 2019-06-22 02:49:56.906 info stateChange ham.0.Tado-Anyone.Accessory-Information.Firmware-Revision {"val":"4.5.4","ack":true,"ts":1561164596556,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596556} ham.0 2019-06-22 02:49:56.906 info stateChange ham.0.Tado-Anyone.Accessory-Information.Serial-Number {"val":"1234567890","ack":true,"ts":1561164596556,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596556} ham.0 2019-06-22 02:49:56.906 info stateChange ham.0.Tado-Anyone.Accessory-Information.Name {"val":"","ack":true,"ts":1561164596555,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596555} ham.0 2019-06-22 02:49:56.906 info stateChange ham.0.Tado-Anyone.Accessory-Information.Model {"val":"Occupancy Sensor","ack":true,"ts":1561164596555,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596555} ham.0 2019-06-22 02:49:56.906 info stateChange ham.0.Tado-Anyone.Accessory-Information.Manufacturer {"val":"SeydX","ack":true,"ts":1561164596554,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596554} ham.0 2019-06-22 02:49:56.906 info stateChange ham.0.Tado-Anyone.Accessory-Information.Identify {"val":false,"ack":true,"ts":1561164596554,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596554} ham.0 2019-06-22 02:49:56.906 info stateChange ham.0.Sörens-iPhone.Sörens-iPhone-History.S2W2 {"val":null,"ack":true,"ts":1561164596553,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596553} ham.0 2019-06-22 02:49:56.906 info stateChange ham.0.Sörens-iPhone.Sörens-iPhone-History.S2W1 {"val":null,"ack":true,"ts":1561164596553,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596553} ham.0 2019-06-22 02:49:56.906 info stateChange ham.0.Sörens-iPhone.Sörens-iPhone-History.S2R2 {"val":"AA==","ack":true,"ts":1561164596543,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596543} ham.0 2019-06-22 02:49:56.906 info stateChange ham.0.Sörens-iPhone.Sörens-iPhone-History.S2R1 {"val":"J6iQAAAAAAAYEXAhAhMBHAFxAMAPAAAAAAAAAAABAQ==","ack":true,"ts":1561164596542,"q":0,"from":"system.adapter.ham.0","user":"system.user.a ham.0 2019-06-22 02:49:56.905 info stateChange ham.0.Sörens-iPhone.Sörens-iPhone-History.Name {"val":"Sörens iPhone History","ack":true,"ts":1561164596541,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":156116459654 ham.0 2019-06-22 02:49:56.905 info stateChange ham.0.Sörens-iPhone.Sörens-iPhone.Last-Activation {"val":1559331716,"ack":true,"ts":1561164596540,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596540} ham.0 2019-06-22 02:49:56.905 info stateChange ham.0.Sörens-iPhone.Sörens-iPhone.Motion-Detected {"val":true,"ack":true,"ts":1561164596540,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596540} ham.0 2019-06-22 02:49:56.905 info stateChange ham.0.Sörens-iPhone.Sörens-iPhone.Name {"val":"Sörens iPhone","ack":true,"ts":1561164596539,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596539} ham.0 2019-06-22 02:49:56.905 info stateChange ham.0.Sörens-iPhone.Accessory-Information.Firmware-Revision {"val":"4.5.4","ack":true,"ts":1561164596539,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596539} ham.0 2019-06-22 02:49:56.905 info stateChange ham.0.Sörens-iPhone.Accessory-Information.Serial-Number {"val":"684842","ack":true,"ts":1561164596538,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596538} ham.0 2019-06-22 02:49:56.905 info stateChange ham.0.Sörens-iPhone.Accessory-Information.Name {"val":"","ack":true,"ts":1561164596538,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596538} ham.0 2019-06-22 02:49:56.905 info stateChange ham.0.Sörens-iPhone.Accessory-Information.Model {"val":"iPhone9,1","ack":true,"ts":1561164596538,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596538} ham.0 2019-06-22 02:49:56.905 info stateChange ham.0.Sörens-iPhone.Accessory-Information.Manufacturer {"val":"SeydX","ack":true,"ts":1561164596537,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596537} ham.0 2019-06-22 02:49:56.905 info stateChange ham.0.Sörens-iPhone.Accessory-Information.Identify {"val":false,"ack":true,"ts":1561164596537,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596537} ham.0 2019-06-22 02:49:56.905 info stateChange ham.0.Tado-Solar-Intensity.Tado-Solar-Intensity.Brightness {"val":1,"ack":true,"ts":1561164596536,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596536} ham.0 2019-06-22 02:49:56.905 info stateChange ham.0.Tado-Solar-Intensity.Tado-Solar-Intensity.On {"val":true,"ack":true,"ts":1561164596536,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596536} ham.0 2019-06-22 02:49:56.905 info stateChange ham.0.Tado-Solar-Intensity.Tado-Solar-Intensity.Name {"val":"Tado Solar Intensity","ack":true,"ts":1561164596535,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164 ham.0 2019-06-22 02:49:56.905 info stateChange ham.0.Tado-Solar-Intensity.Accessory-Information.Firmware-Revision {"val":"4.5.4","ack":true,"ts":1561164596534,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":15611645 ham.0 2019-06-22 02:49:56.905 info stateChange ham.0.Tado-Solar-Intensity.Accessory-Information.Serial-Number {"val":"214860-10","ack":true,"ts":1561164596534,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":15611645 ham.0 2019-06-22 02:49:56.905 info stateChange ham.0.Tado-Solar-Intensity.Accessory-Information.Name {"val":"","ack":true,"ts":1561164596533,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596533} ham.0 2019-06-22 02:49:56.905 info stateChange ham.0.Tado-Solar-Intensity.Accessory-Information.Model {"val":"Solar Intensity","ack":true,"ts":1561164596533,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596 ham.0 2019-06-22 02:49:56.905 info stateChange ham.0.Tado-Solar-Intensity.Accessory-Information.Manufacturer {"val":"SeydX","ack":true,"ts":1561164596532,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596532 ham.0 2019-06-22 02:49:56.904 info stateChange ham.0.Tado-Solar-Intensity.Accessory-Information.Identify {"val":false,"ack":true,"ts":1561164596532,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596532} ham.0 2019-06-22 02:49:56.904 info stateChange ham.0.Tado-Weather.Tado-Weather-History.S2W2 {"val":null,"ack":true,"ts":1561164596531,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596531} ham.0 2019-06-22 02:49:56.904 info stateChange ham.0.Tado-Weather.Tado-Weather-History.S2W1 {"val":null,"ack":true,"ts":1561164596531,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596531} ham.0 2019-06-22 02:49:56.904 info stateChange ham.0.Tado-Weather.Tado-Weather-History.S2R2 {"val":"AA==","ack":true,"ts":1561164596530,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596530} ham.0 2019-06-22 02:49:56.904 info stateChange ham.0.Tado-Weather.Tado-Weather-History.S2R1 {"val":"5MLrAAAAAAD29bUhAwECAgIDAsAPwA9qOgAAAAAAAAEB","ack":true,"ts":1561164596530,"q":0,"from":"system.adapter.ham.0","user":"system.user.adm ham.0 2019-06-22 02:49:56.904 info stateChange ham.0.Tado-Weather.Tado-Weather-History.Name {"val":"Tado Weather History","ack":true,"ts":1561164596529,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596529} ham.0 2019-06-22 02:49:56.904 info stateChange ham.0.Tado-Weather.Tado-Weather.Sunset {"val":"21:33","ack":true,"ts":1561164596529,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596529} ham.0 2019-06-22 02:49:56.904 info stateChange ham.0.Tado-Weather.Tado-Weather.Sunrise {"val":"05:23","ack":true,"ts":1561164596528,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596528} ham.0 2019-06-22 02:49:56.904 info stateChange ham.0.Tado-Weather.Tado-Weather.Weather {"val":"Clouds","ack":true,"ts":1561164596528,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596528} ham.0 2019-06-22 02:49:56.904 info stateChange ham.0.Tado-Weather.Tado-Weather.Air-Pressure {"val":1023,"ack":true,"ts":1561164596528,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596528} ham.0 2019-06-22 02:49:56.904 info stateChange ham.0.Tado-Weather.Tado-Weather.Current-Relative-Humidity {"val":56,"ack":true,"ts":1561164596527,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596527} ham.0 2019-06-22 02:49:56.904 info stateChange ham.0.Tado-Weather.Tado-Weather.Current-Temperature {"val":19.72,"ack":true,"ts":1561164596526,"q":0,"from":"system.adapter.ham.0","user":"system.user.admin","lc":1561164596526} ham.0 2019-06-22 02:49:56.670 info updateChannel Tado-Anyone.Accessory-Information: name = undefined ham.0 2019-06-22 02:49:56.670 info updateDev Tado-Anyone: name = Tado Anyone /type= 10 ham.0 2019-06-22 02:49:56.670 info updateState Sörens-iPhone.Sörens-iPhone-History.S2W2: value = null /common= {"type":"string","read":false,"write":true,"role":"text","name":"S2W2","unit":""} ham.0 2019-06-22 02:49:56.670 info updateState Sörens-iPhone.Sörens-iPhone-History.S2W1: value = null /common= {"type":"string","read":false,"write":true,"role":"text","name":"S2W1","unit":""} ham.0 2019-06-22 02:49:56.670 info updateState Sörens-iPhone.Sörens-iPhone-History.S2R2: value = AA== /common= {"type":"string","read":true,"write":false,"role":"text","name":"S2R2","unit":""} ham.0 2019-06-22 02:49:56.670 info updateState Sörens-iPhone.Sörens-iPhone-History.S2R1: value = J6iQAAAAAAAYEXAhAhMBHAFxAMAPAAAAAAAAAAABAQ== /common= {"type":"string","read":true,"write":false,"role":"text","name":"S2R1","unit":""} ham.0 2019-06-22 02:49:56.670 info updateState Sörens-iPhone.Sörens-iPhone-History.Name: value = Sörens iPhone History /common= {"type":"string","read":true,"write":false,"role":"text","name":"Name","unit":""} ham.0 2019-06-22 02:49:56.670 info updateChannel Sörens-iPhone.Sörens-iPhone-History: name = Sörens iPhone History ham.0 2019-06-22 02:49:56.670 info updateState Sörens-iPhone.Sörens-iPhone.Last-Activation: value = 1559331716 /common= {"type":"number","unit":"s","min":0,"max":4294967295,"read":true,"write":false,"role":"value","name":"Last Activati ham.0 2019-06-22 02:49:56.669 info updateState Sörens-iPhone.Sörens-iPhone.Motion-Detected: value = true /common= {"type":"boolean","read":true,"write":false,"role":"sensor.motion","name":"Motion Detected","unit":""} ham.0 2019-06-22 02:49:56.669 info updateState Sörens-iPhone.Sörens-iPhone.Name: value = Sörens iPhone /common= {"type":"string","read":true,"write":false,"role":"text","name":"Name","unit":""} ham.0 2019-06-22 02:49:56.669 info updateChannel Sörens-iPhone.Sörens-iPhone: name = Sörens iPhone ham.0 2019-06-22 02:49:56.669 info updateState Sörens-iPhone.Accessory-Information.Firmware-Revision: value = 4.5.4 /common= {"type":"string","read":true,"write":false,"role":"text","name":"Firmware Revision","unit":""} ham.0 2019-06-22 02:49:56.669 info updateState Sörens-iPhone.Accessory-Information.Serial-Number: value = 684842 /common= {"type":"string","read":true,"write":false,"role":"text","name":"Serial Number","unit":""} ham.0 2019-06-22 02:49:56.669 info updateState Sörens-iPhone.Accessory-Information.Name: value = /common= {"type":"string","read":true,"write":false,"role":"text","name":"Name","unit":""} ham.0 2019-06-22 02:49:56.669 info updateState Sörens-iPhone.Accessory-Information.Model: value = iPhone9,1 /common= {"type":"string","read":true,"write":false,"role":"text","name":"Model","unit":""} ham.0 2019-06-22 02:49:56.669 info updateState Sörens-iPhone.Accessory-Information.Manufacturer: value = SeydX /common= {"type":"string","read":true,"write":false,"role":"text","name":"Manufacturer","unit":""} ham.0 2019-06-22 02:49:56.669 info updateState Sörens-iPhone.Accessory-Information.Identify: value = false /common= {"type":"boolean","read":false,"write":true,"role":"button","name":"Identify","unit":""} ham.0 2019-06-22 02:49:56.669 info updateChannel Sörens-iPhone.Accessory-Information: name = undefined ham.0 2019-06-22 02:49:56.669 info updateDev Sörens-iPhone: name = Sörens iPhone /type= 10 ham.0 2019-06-22 02:49:56.669 info updateState Tado-Solar-Intensity.Tado-Solar-Intensity.Brightness: value = 1 /common= {"type":"number","unit":"%","min":0,"max":100,"read":true,"write":true,"role":"level.brightness","name":"Brightness ham.0 2019-06-22 02:49:56.668 info updateState Tado-Solar-Intensity.Tado-Solar-Intensity.On: value = true /common= {"type":"boolean","read":true,"write":true,"role":"switch","name":"On","unit":""} ham.0 2019-06-22 02:49:56.668 info updateState Tado-Solar-Intensity.Tado-Solar-Intensity.Name: value = Tado Solar Intensity /common= {"type":"string","read":true,"write":false,"role":"text","name":"Name","unit":""} ham.0 2019-06-22 02:49:56.668 info updateChannel Tado-Solar-Intensity.Tado-Solar-Intensity: name = Tado Solar Intensity ham.0 2019-06-22 02:49:56.668 info updateState Tado-Solar-Intensity.Accessory-Information.Firmware-Revision: value = 4.5.4 /common= {"type":"string","read":true,"write":false,"role":"text","name":"Firmware Revision","unit":""} ham.0 2019-06-22 02:49:56.668 info updateState Tado-Solar-Intensity.Accessory-Information.Serial-Number: value = 214860-10 /common= {"type":"string","read":true,"write":false,"role":"text","name":"Serial Number","unit":""} ham.0 2019-06-22 02:49:56.668 info updateState Tado-Solar-Intensity.Accessory-Information.Name: value = /common= {"type":"string","read":true,"write":false,"role":"text","name":"Name","unit":""} ham.0 2019-06-22 02:49:56.668 info updateState Tado-Solar-Intensity.Accessory-Information.Model: value = Solar Intensity /common= {"type":"string","read":true,"write":false,"role":"text","name":"Model","unit":""} ham.0 2019-06-22 02:49:56.668 info updateState Tado-Solar-Intensity.Accessory-Information.Manufacturer: value = SeydX /common= {"type":"string","read":true,"write":false,"role":"text","name":"Manufacturer","unit":""} ham.0 2019-06-22 02:49:56.668 info updateState Tado-Solar-Intensity.Accessory-Information.Identify: value = false /common= {"type":"boolean","read":false,"write":true,"role":"button","name":"Identify","unit":""} ham.0 2019-06-22 02:49:56.668 info updateChannel Tado-Solar-Intensity.Accessory-Information: name = undefined ham.0 2019-06-22 02:49:56.668 info updateDev Tado-Solar-Intensity: name = Tado Solar Intensity /type= 5 ham.0 2019-06-22 02:49:56.667 info updateState Tado-Weather.Tado-Weather-History.S2W2: value = null /common= {"type":"string","read":false,"write":true,"role":"text","name":"S2W2","unit":""} ham.0 2019-06-22 02:49:56.667 info updateState Tado-Weather.Tado-Weather-History.S2W1: value = null /common= {"type":"string","read":false,"write":true,"role":"text","name":"S2W1","unit":""} ham.0 2019-06-22 02:49:56.667 info updateState Tado-Weather.Tado-Weather-History.S2R2: value = AA== /common= {"type":"string","read":true,"write":false,"role":"text","name":"S2R2","unit":""} ham.0 2019-06-22 02:49:56.667 info updateState Tado-Weather.Tado-Weather-History.S2R1: value = 5MLrAAAAAAD29bUhAwECAgIDAsAPwA9qOgAAAAAAAAEB /common= {"type":"string","read":true,"write":false,"role":"text","name":"S2R1","unit":""} ham.0 2019-06-22 02:49:56.667 info updateState Tado-Weather.Tado-Weather-History.Name: value = Tado Weather History /common= {"type":"string","read":true,"write":false,"role":"text","name":"Name","unit":""} ham.0 2019-06-22 02:49:56.667 info updateChannel Tado-Weather.Tado-Weather-History: name = Tado Weather History ham.0 2019-06-22 02:49:56.667 info updateState Tado-Weather.Tado-Weather.Sunset: value = 21:33 /common= {"type":"string","read":true,"write":false,"role":"text","name":"Sunset","unit":""} ham.0 2019-06-22 02:49:56.667 info updateState Tado-Weather.Tado-Weather.Sunrise: value = 05:23 /common= {"type":"string","read":true,"write":false,"role":"text","name":"Sunrise","unit":""} ham.0 2019-06-22 02:49:56.667 info updateState Tado-Weather.Tado-Weather.Weather: value = Clouds /common= {"type":"string","read":true,"write":false,"role":"text","name":"Weather","unit":""} ham.0 2019-06-22 02:49:56.667 info updateState Tado-Weather.Tado-Weather.Air-Pressure: value = 1023 /common= {"type":"number","unit":"hPa","min":700,"max":1100,"read":true,"write":false,"role":"value","name":"Air Pressure"} ham.0 2019-06-22 02:49:56.667 info updateState Tado-Weather.Tado-Weather.Current-Relative-Humidity: value = 56 /common= {"type":"number","unit":"%","min":0,"max":100,"read":true,"write":false,"role":"value.humidity","name":"Current Rel ham.0 2019-06-22 02:49:56.666 info updateState Tado-Weather.Tado-Weather.Current-Temperature: value = 19.72 /common= {"type":"number","unit":"°C","min":-100,"max":100,"read":true,"write":false,"role":"value.temperature","name":"Current ham.0 2019-06-22 02:49:56.666 info updateState Tado-Weather.Tado-Weather.Name: value = Tado Weather /common= {"type":"string","read":true,"write":false,"role":"text","name":"Name","unit":""} ham.0 2019-06-22 02:49:56.666 info updateChannel Tado-Weather.Tado-Weather: name = Tado Weather ham.0 2019-06-22 02:49:56.666 info updateState Tado-Weather.Accessory-Information.Firmware-Revision: value = 4.5.4 /common= {"type":"string","read":true,"write":false,"role":"text","name":"Firmware Revision","unit":""} ham.0 2019-06-22 02:49:56.665 info updateState Tado-Weather.Accessory-Information.Serial-Number: value = 214860-4 /common= {"type":"string","read":true,"write":false,"role":"text","name":"Serial Number","unit":""} ham.0 2019-06-22 02:49:56.665 info updateState Tado-Weather.Accessory-Information.Name: value = /common= {"type":"string","read":true,"write":false,"role":"text","name":"Name","unit":""} ham.0 2019-06-22 02:49:56.665 info updateState Tado-Weather.Accessory-Information.Model: value = Weather /common= {"type":"string","read":true,"write":false,"role":"text","name":"Model","unit":""} ham.0 2019-06-22 02:49:56.665 info updateState Tado-Weather.Accessory-Information.Manufacturer: value = SeydX /common= {"type":"string","read":true,"write":false,"role":"text","name":"Manufacturer","unit":""} ham.0 2019-06-22 02:49:56.665 info updateState Tado-Weather.Accessory-Information.Identify: value = false /common= {"type":"boolean","read":false,"write":true,"role":"button","name":"Identify","unit":""} ham.0 2019-06-22 02:49:56.665 info updateChannel Tado-Weather.Accessory-Information: name = undefined ham.0 2019-06-22 02:49:56.665 info updateDev Tado-Weather: name = Tado Weather /type= 10 ham.0 2019-06-22 02:49:56.664 info updateState Tado-Central-Switch.Tado-Central-Switch.State-(auto): value = 0 /common= {"type":"number","min":0,"max":4,"read":true,"write":false,"role":"value","name":"State (auto)","unit":""} ham.0 2019-06-22 02:49:56.664 info updateState Tado-Central-Switch.Tado-Central-Switch.State-(off): value = 4 /common= {"type":"number","min":0,"max":4,"read":true,"write":false,"role":"value","name":"State (off)","unit":""} ham.0 2019-06-22 02:49:56.664 info updateState Tado-Central-Switch.Tado-Central-Switch.State-(manual): value = 0 /common= {"type":"number","min":0,"max":4,"read":true,"write":false,"role":"value","name":"State (manual)","unit":""} ham.0 2019-06-22 02:49:56.664 info updateState Tado-Central-Switch.Tado-Central-Switch.Window-Switch: value = false /common= {"type":"boolean","read":true,"write":true,"role":"switch","name":"Window Switch","unit":""} ham.0 2019-06-22 02:49:56.664 info updateState Tado-Central-Switch.Tado-Central-Switch.On: value = false /common= {"type":"boolean","read":true,"write":true,"role":"switch","name":"On","unit":""} ham.0 2019-06-22 02:49:56.664 info updateState Tado-Central-Switch.Tado-Central-Switch.Name: value = Tado Central Switch /common= {"type":"string","read":true,"write":false,"role":"text","name":"Name","unit":""} ham.0 2019-06-22 02:49:56.664 info updateChannel Tado-Central-Switch.Tado-Central-Switch: name = Tado Central Switch ham.0 2019-06-22 02:49:56.664 info updateState Tado-Central-Switch.Accessory-Information.Firmware-Revision: value = 4.5.4 /common= {"type":"string","read":true,"write":false,"role":"text","name":"Firmware Revision","unit":""} ham.0 2019-06-22 02:49:56.664 info updateState Tado-Central-Switch.Accessory-Information.Serial-Number: value = 214860-2 /common= {"type":"string","read":true,"write":false,"role":"text","name":"Serial Number","unit":""} ham.0 2019-06-22 02:49:56.664 info updateState Tado-Central-Switch.Accessory-Information.Name: value = /common= {"type":"string","read":true,"write":false,"role":"text","name":"Name","unit":""} ham.0 2019-06-22 02:49:56.664 info updateState Tado-Central-Switch.Accessory-Information.Model: value = Central Switch /common= {"type":"string","read":true,"write":false,"role":"text","name":"Model","unit":""} ham.0 2019-06-22 02:49:56.663 info updateState Tado-Central-Switch.Accessory-Information.Manufacturer: value = SeydX /common= {"type":"string","read":true,"write":false,"role":"text","name":"Manufacturer","unit":""} ham.0 2019-06-22 02:49:56.663 info updateState Tado-Central-Switch.Accessory-Information.Identify: value = false /common= {"type":"boolean","read":false,"write":true,"role":"button","name":"Identify","unit":""} ham.0 2019-06-22 02:49:56.663 info updateChannel Tado-Central-Switch.Accessory-Information: name = undefined ham.0 2019-06-22 02:49:56.662 info updateDev Tado-Central-Switch: name = Tado Central Switch /type= 8 ham.0 2019-06-22 02:49:54.774 info starting. Version 1.0.1 in /opt/iobroker/node_modules/iobroker.ham, node: v8.14.0Hast du eine Idee wie ich die los werde oder den globalen Modus zum online bekomme?
Dank dir schon jetzt!
-
- in der Konfigurationsdatei NIX eintragen
- prüfen WO genau die node_modules liegen mit:
npm root -g
(=> normalerweise unter /usr/local/lib/node_modules) - diesen Pfad dann in "Global Homebridge Path" angeben
- wenn deine config.json vom Original-Homebridge unter /var/homebridge legt -> dann ist's okay!
Beachte - aber das hast du ja schon
:
ioBroker UND Original-Homebridge MÜSSEN auf dem identischen RPi laufen -
Homebridge stoppen
... und unter /var/homebridge die Verzeichnisse:/accessories
/persistlöschen
und in der config.json folgendes bei "bridge" ändern:
- "username" leicht verändern (nur eine Zahl ändern.... oder so)
- "pin" ebenfalls leicht ändern (z.B. letzte Zahl)
dann HB neu starten oder gleich rebooten...
-
@smoker Hi Smoker,
lieben Dank für deine Antwort. Ich habe Homebridge inzwischen komplett gelöscht und alle dateien in /usr/lib/node_modules
(auch = ergebniss von npm root -g)
samt Ordner von homebridge gelöscht.Hatte vorher probiert die config zu leeren, hatte auch nicht geholfen...
Ergebniss bleibt gleich.
Habe auch den Adapter ham gelöscht, von git neu instaliert, wieder gelöscht und instanz über admin aus repo instaliert. beides mal konfig geleert aber immer erscheinen direkt beim start die alten objekte/states wenn nicht global aktiviert ist (geht ja nun so nicht mehr)
ich habe also keine homebridge mehr laufen (zumindest nicht bewusst, könnte aber von nem Test über sein... Bin kein Linux experte und kann es nur an dem Verzeichniss fest machen -> auf dem Beelink läuft übrigens debian
ham ist auch nicht konfiguriert, states erscheinen dennoch (deutet wohl auf eine weitere instanz hin?? )
Hätte nun 3 Alternativen...
- rausfinden wo die states herkommen und ordentlich löschen dann homebridge neu aufsetzen
wär mir am liebsten
-
hombridge neu instalieren und global verwenden
-
ich habe noch einen slave iobroker auf nem 2. rspi - dort könnte ichd en ham laufen lassen zum testen..
Hast du ne Idee zu 1? Was würdest du machen? und wie?
-
Hi! Gibst Möglichkeit das ham Homebridge server mit dem Schlüssel -I startet? Das braucht Config UI X um "Accessories" Seite anzuzeigen.
-
@Alex1808 sagte in [Aufruf] ioBroker.ham (Homebridge Accessory Manager) testen:
Das braucht Config UI X um "Accessories" Seite anzuzeigen.
Das heisst "insecure" ... ... ...
Mach mal ein GitHub Issue auf als Feature-Request -
Habe gemacht.
-
Das Neato Plugin läuft (und redet nun mit meiner Snips-Integration ;)).
Das sound touch-platform Plugin braucht leider Homebridge >=0.4.48 und ist somit aktuell nicht kompatibel. -
@cburghardt Bitte GitHub Issue, machen wegen dem Update, dann kann ich das demnächst mal angehen
-
Hallo zusammen, habe mich gerade hier angemeldet weil ich einfach nicht mehr weiterkomme... Ich hoffe ihr könnt mir helfen. Also hier das Problem:
Adapter Ham ist installiert und die config ist das gleiche wie bei der Homebridge. Momentan laufen die Systeme Parallel - homebridge läuft auf den einen Raspberry und iobroker auf dem anderen.
Homebridge-ssh ist auf beiden installiert.Nun das eigentliche Problem:
Rückmeldung von Homebridge funktioniert wenn iTunes läuft zeigt er mir an das die Musik an ist, auch wenn ich es am Mac einschalte , erkennt er (weil er sich irgendwo die Daten holt) das die Musik eingeschaltet worden ist.Beim iobroker geht das nicht. Obwohl auch in der config der „State“ entsprechend eingerichtet ist.
Wie bekomme ich die Rückmeldung von iTunes über iobroker hin, so dass verlässlich davon ausgegangen werden kann das die Musik an ist.
Wäre super wenn mir jemand helfen könnte. Es kann auch ne alternativ Lösung sein - Hauptsache das die Rückmeldung stimmt. Danke schonmal im Voraus
Viele Grüße
Nanekx -
Welches Plugin ist denn für diese itunes Rückmeldung so verantwortlich? Welche Plugins nutzt du do alles? Was sagt das iobroker log? Ggf mal debug log bitte.
Ein paarmehr exakte Infos wären schon cool
