Jahresrückblick 2025 – unser neuer Blogbeitrag ist online! ✨

[searcher57]

@homoran said in Täglicher Absturz ioBroker + Zugriff auf Raspi:

@searcher57 sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:

Könnt Ihr etwas empfehlen?

muss nicht teuer sein. nur für den Raspi gibt es sogar aufsteckmodule.
Ich würde aber ne kleine mitvreinem Sinus nehmen und noch paar andere Dinge wie z.B. die Fritzbox, ein NAS o.ä. dranhängen.

Ok, danke ich schau mich um.
Noch eine Frage zu meinem Problem:
Soll ich mir für die Zukunft eine Sicherheitskopie die jetzt laufende SD Karte mit"Win32 Disk Imager" clonen, oder die saubere Lösung mit Einrichten einer SD Karte + Restore herstellen?

[Thomas Braun]

@searcher57

Ich sehe eigentlich keine Notwendigkeit für FullClones.
Flugs frisch aufsetzen und das Backitup einspielen, fertig.

[searcher57]

@thomas-braun said in Täglicher Absturz ioBroker + Zugriff auf Raspi:

@searcher57

Ich sehe eigentlich keine Notwendigkeit für FullClones.
Flugs frisch aufsetzen und das Backitup einspielen, fertig.

Aber beim Wechsel muss der Key angepasst werden, oder..? Bitte gib mir nochmal den Hinweis, wie?

[Thomas Braun]

@searcher57
Was für ein Key?

[Homoran]

@searcher57 sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:

beim Wechsel muss der Key angepasst werden,

wovon redest du?
Was wechselt?
welcher Key?

[searcher57]

@thomas-braun said in Täglicher Absturz ioBroker + Zugriff auf Raspi:

@searcher57
Was für ein Key?

Ich meine, ich hätte mal beim Wechsel der SD Karte eine ähnliche Aufforderung bekommen. Kann sein, dass ich Blödsinn rede. Also Aufsetzen und Backitup und schon habe ich eine Sicherheit!!

[Homoran]

@searcher57 sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:

ich hätte mal beim Wechsel der SD Karte eine ähnliche Aufforderung bekommen

in putty?

[searcher57]

@homoran said in Täglicher Absturz ioBroker + Zugriff auf Raspi:

@searcher57 sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:

ich hätte mal beim Wechsel der SD Karte eine ähnliche Aufforderung bekommen

in putty?

Ich glaube ja.

[Homoran]

@searcher57 das ist die Meldung, dass unter der Ip jetzt nicht mehr der selbe Rechner zu erreichen ist wie bisher.
Wenn du selber nichts geändert hast sollst du gewarnt werden, dass sich da ggf. jemand fremdes versucht einzuklinken.

Da du aber neu aufgesetzt hast, kannst du der Verbindung vertrauen

[searcher57]

@homoran said in Täglicher Absturz ioBroker + Zugriff auf Raspi:

@searcher57 das ist die Meldung, dass unter der Ip jetzt nicht mehr der selbe Rechner zu erreichen ist wie bisher.
Wenn du selber nichts geändert hast sollst du gewarnt werden, dass sich da ggf. jemand fremdes versucht einzuklinken.

Da du aber neu aufgesetzt hast, kannst du der Verbindung vertrauen

Ok schon wieder was gelernt! Ein guter Tag!!:+1: :+1:
So alter Mann muss in die Heia! Danke!

[searcher57]

@searcher57 said in Täglicher Absturz ioBroker + Zugriff auf Raspi:

Hallo!
Seit einigen Tagen stürzt mein ioBroker täglich ab. Ich habe dann auch keinen Zugang mehr über SSH auf den Raspi. Dann hilft nur noch ein Hardware-Reset (Ein- und Ausschalten)!
Die letzten Log-Einträge vor dem Crash heute:

2023-05-14 16:17:13.274  - info: host.raspberrypi Delete state "system.host.raspberrypi.versions.npmNewest"
2023-05-14 16:17:13.344  - info: host.raspberrypi Delete state "system.host.raspberrypi.versions.npmNewestNext"
2023-05-14 16:17:13.408  - info: host.raspberrypi Some obsolete host states deleted.
2023-05-14 16:17:15.188  - error: admin.0 (666) admin.0 already running
2023-05-14 16:17:15.193  - warn: admin.0 (666) Terminated (ADAPTER_ALREADY_RUNNING): Without reason
2023-05-14 16:17:15.787  - error: host.raspberrypi instance system.adapter.admin.0 terminated with code 7 (ADAPTER_ALREADY_RUNNING)
2023-05-14 16:17:15.788  - info: host.raspberrypi Restart adapter system.adapter.admin.0 because enabled
2023-05-14 16:17:17.020  - info: host.raspberrypi instance system.adapter.javascript.0 started with pid 826
2023-05-14 16:17:20.284  - error: javascript.0 (826) javascript.0 already running
2023-05-14 16:17:20.287  - warn: javascript.0 (826) Terminated (ADAPTER_ALREADY_RUNNING): Without reason
2023-05-14 16:17:20.878  - error: host.raspberrypi instance system.adapter.javascript.0 terminated with code 7 (ADAPTER_ALREADY_RUNNING)
2023-05-14 16:17:20.879  - info: host.raspberrypi Restart adapter system.adapter.javascript.0 because enabled
2023-05-14 16:17:21.019  - info: host.raspberrypi instance system.adapter.telegram.0 started with pid 838
2023-05-14 16:17:23.485  - error: telegram.0 (838) telegram.0 already running
2023-05-14 16:17:23.490  - warn: telegram.0 (838) Terminated (ADAPTER_ALREADY_RUNNING): Without reason
2023-05-14 16:17:24.070  - error: host.raspberrypi instance system.adapter.telegram.0 terminated with code 7 (ADAPTER_ALREADY_RUNNING)
2023-05-14 16:17:24.071  - info: host.raspberrypi Restart adapter system.adapter.telegram.0 because enabled
2023-05-14 16:17:25.256  - info: host.raspberrypi instance system.adapter.telegram.0 started with pid 849
2023-05-14 16:17:25.327  - info: host.raspberrypi instance system.adapter.history.0 started with pid 856
2023-05-14 16:17:27.183  - error: history.0 (856) history.0 already running
2023-05-14 16:17:27.189  - warn: history.0 (856) Terminated (ADAPTER_ALREADY_RUNNING): Without reason
2023-05-14 16:17:27.793  - error: host.raspberrypi instance system.adapter.history.0 terminated with code 7 (ADAPTER_ALREADY_RUNNING)
2023-05-14 16:17:27.794  - info: host.raspberrypi Restart adapter system.adapter.history.0 because enabled
2023-05-14 16:17:28.358  - info: telegram.0 (849) starting. Version 1.15.2 in /opt/iobroker/node_modules/iobroker.telegram, node: v18.16.0, js-controller: 4.0.24
2023-05-14 16:17:29.019  - info: host.raspberrypi instance system.adapter.alexa2.0 started with pid 875
2023-05-14 16:17:30.692  - error: alexa2.0 (875) alexa2.0 already running
2023-05-14 16:17:30.697  - warn: alexa2.0 (875) Terminated (ADAPTER_ALREADY_RUNNING): Without reason
2023-05-14 16:17:31.271  - error: host.raspberrypi instance system.adapter.alexa2.0 terminated with code 7 (ADAPTER_ALREADY_RUNNING)
2023-05-14 16:17:31.271  - info: host.raspberrypi Restart adapter system.adapter.alexa2.0 because enabled
2023-05-14 16:17:33.013  - info: host.raspberrypi instance system.adapter.hm-rega.0 started with pid 886
2023-05-14 18:07:48.687  - error: hm-rega.0 (886) hm-rega.0 already running
2023-05-14 18:07:48.691  - warn: hm-rega.0 (886) Terminated (ADAPTER_ALREADY_RUNNING): Without reason
2023-05-14 18:07:49.268  - error: host.raspberrypi instance system.adapter.hm-rega.0 terminated with code 7 (ADAPTER_ALREADY_RUNNING)
2023-05-14 18:07:49.268  - info: host.raspberrypi Restart adapter system.adapter.hm-rega.0 because enabled
2023-05-14 18:07:50.819  - info: host.raspberrypi instance system.adapter.hm-rpc.0 started with pid 897
2023-05-14 18:07:52.359  - error: hm-rpc.0 (897) hm-rpc.0 already running
2023-05-14 18:07:52.363  - warn: hm-rpc.0 (897) Terminated (ADAPTER_ALREADY_RUNNING): Without reason
2023-05-14 18:07:52.936  - error: host.raspberrypi instance system.adapter.hm-rpc.0 terminated with code 7 (ADAPTER_ALREADY_RUNNING)
2023-05-14 18:07:52.937  - info: host.raspberrypi Restart adapter system.adapter.hm-rpc.0 because enabled
2023-05-14 18:07:54.810  - info: host.raspberrypi instance system.adapter.hm-rpc.1 started with pid 908
2023-05-14 18:07:56.331  - error: hm-rpc.1 (908) hm-rpc.1 already running
2023-05-14 18:07:56.335  - warn: hm-rpc.1 (908) Terminated (ADAPTER_ALREADY_RUNNING): Without reason
2023-05-14 18:07:56.964  - error: host.raspberrypi instance system.adapter.hm-rpc.1 terminated with code 7 (ADAPTER_ALREADY_RUNNING)
2023-05-14 18:07:56.965  - info: host.raspberrypi Restart adapter system.adapter.hm-rpc.1 because enabled
2023-05-14 18:07:58.826  - info: host.raspberrypi instance system.adapter.shelly.0 started with pid 923
2023-05-14 18:07:59.657  - info: host.raspberrypi instance system.adapter.admin.0 started with pid 930
2023-05-14 18:08:00.997  - error: shelly.0 (923) shelly.0 already running
2023-05-14 18:08:01.002  - warn: shelly.0 (923) Terminated (ADAPTER_ALREADY_RUNNING): Without reason
2023-05-14 18:08:01.605  - error: host.raspberrypi instance system.adapter.shelly.0 terminated with code 7 (ADAPTER_ALREADY_RUNNING)
2023-05-14 18:08:01.606  - info: host.raspberrypi Restart adapter system.adapter.shelly.0 because enabled
2023-05-14 18:08:02.218  - info: admin.0 (930) starting. Version 6.3.5 in /opt/iobroker/node_modules/iobroker.admin, node: v18.16.0, js-controller: 4.0.24
2023-05-14 18:08:02.275  - info: admin.0 (930) requesting all states
2023-05-14 18:08:02.276  - info: admin.0 (930) requesting all objects

Hängt das eventuell mit meinem Doorbird Adapter, den ich im Beta-Respositorie installiert habe zusammen? Die Instanz habe ich gestern gestoppt, trotzdem war heute der Crash.
Meine Daten:
Plattform: linux
Betriebssystem: linux
Architektur: arm64
CPUs: 4
Geschwindigkeit: 1800 MHz
Modell: Cortex-A72
RAM: 1.8 GB
System-Betriebszeit: 00:35:46
Node.js: v18.16.0
time: 1684082577496
timeOffset: -120
Adapter-Anzahl: 473
NPM: v9.5.1
Datenträgergröße: 29.0 GB
Freier Festplattenspeicher: 23.2 GB
Betriebszeit: 02:25:50
Aktive Instanzen: 17
Pfad: /opt/iobroker/
aktiv:

Ich bitte um Hilfe an einen Laien, der wenig Linux-Erfahrung hat und kaum englische Hinweise versteht.

Vielen Dank im voraus
Rainer

[Thomas Braun]

@searcher57 sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:

[erledigt]

Inwiefern?

[searcher57]

@thomas-braun said in Täglicher Absturz ioBroker + Zugriff auf Raspi:

@searcher57 sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:

[erledigt]

Inwiefern?

Das wollte ich gerade schreiben!
Die neue SD Karte und ein neues Aufsetzen incl. Restore hat zum Erfolg geführt! Bitte teil mir nochmal mit, wie ich das ordnungsgemäß abschliesse.
Danke nochmal!

[Thomas Braun]

@searcher57

Den ersten Eintrag entsprechend bearbeiten.

BTW: Ich bin gerade dabei bei mir eine neue USV einzurichten. Um sowas zu vermeiden.

[crunchip]

@searcher57 sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:

Bitte teil mir nochmal mit, wie ich das ordnungsgemäß abschliesse

du hast deinen Beitrag zitiert anstatt bearbeitet
du musst den ersten Beitrag bearbeiten und da in der Überschrift das [Gelöst] setzen

[searcher57]

@thomas-braun said in Täglicher Absturz ioBroker + Zugriff auf Raspi:

@searcher57

Den ersten Eintrag entsprechend bearbeiten.

BTW: Ich bin gerade dabei bei mir eine neue USV einzurichten. Um sowas zu vermeiden.

Ich habe mich auch schon informiert. Bin jetzt erst mal für 5 Wochen im Urlaub, danach gehe ich die Baustelle an.,

[Glasfaser]

@searcher57 sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:

Bitte teil mir nochmal mit, wie ich das ordnungsgemäß abschliesse.

Den Titel ändern mit [gelöst]
Im Startbeitrag gehen und bei den 3 Punkten kannst du es ändern
.

.

[searcher57]

@crunchip said in Täglicher Absturz ioBroker + Zugriff auf Raspi:

@searcher57 sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:

Bitte teil mir nochmal mit, wie ich das ordnungsgemäß abschliesse

du hast deinen Beitrag zitiert anstatt bearbeitet
du musst den ersten Beitrag bearbeiten und da in der Überschrift das [Gelöst] setzen

Ok, danke für den Hinweis!

[searcher57]

@thomas-braun said in Täglicher Absturz ioBroker + Zugriff auf Raspi [gelöst]:

@searcher57 sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:

[erledigt]

Inwiefern?

Hallo Thomas und Helfer,
zu früh gefreut! Ich habe das Ganze nochmal über Tage hinweg beobachtet. Leider stürzt der Raspi auch mit der neu aufgesetzten SD Karte ab. Was mir auffällt, dass das meistens kurz nach 14 Uhr, während ich im ioBroker arbeite, passiert. Bitte fragt mich nicht, was das mit der Tageszeit zu tun hat. Beide LED's leuchten durch. Kein Kontakt über SSH mehr möglich. Ich hänge nochmal ein Protokoll an, aber ich denke das hilft Euch wenig, weil es nach dem Hardware-Reset neu gestartet ist. Wäre schön, wenn Ihr mir nochmal helft diesen Fehler heraus zu finden.

host.raspberrypi
	2023-05-24 14:19:44.918	error	instance system.adapter.text2command.0 terminated with code 7 (ADAPTER_ALREADY_RUNNING)
alexa2.0
	2023-05-24 14:19:44.845	info	Initialize all Device states ...
hm-rega.0
	2023-05-24 14:19:44.792	info	renamed hm-rpc.0.00115BE9956D53.4.SECTION_STATUS to "Rollo Aktor Markise:4.SECTION_STATUS"
hm-rega.0
	2023-05-24 14:19:44.776	info	renamed hm-rpc.0.00115BE9956D53.4.SECTION to "Rollo Aktor Markise:4.SECTION"
hm-rega.0
	2023-05-24 14:19:44.758	info	renamed hm-rpc.0.00115BE9956D53.4.PROCESS to "Rollo Aktor Markise:4.PROCESS"
hm-rega.0
	2023-05-24 14:19:44.739	info	renamed hm-rpc.0.00115BE9956D53.4.LEVEL_STATUS to "Rollo Aktor Markise:4.LEVEL_STATUS"
hm-rega.0
	2023-05-24 14:19:44.699	info	renamed hm-rpc.0.00115BE9956D53.4.LEVEL to "Rollo Aktor Markise:4.LEVEL"
hm-rega.0
	2023-05-24 14:19:44.682	info	renamed hm-rpc.0.00115BE9956D53.4.ACTIVITY_STATE to "Rollo Aktor Markise:4.ACTIVITY_STATE"
hm-rega.0
	2023-05-24 14:19:44.673	info	renamed hm-rpc.0.00115BE9956D53.4 to "Rollo Aktor Markise:4"
hm-rega.0
	2023-05-24 14:19:44.665	info	renamed hm-rpc.0.00115BE9956D53.3.SECTION_STATUS to "Rollo Aktor Markise:3.SECTION_STATUS"
hm-rega.0
	2023-05-24 14:19:44.655	info	renamed hm-rpc.0.00115BE9956D53.3.SECTION to "Rollo Aktor Markise:3.SECTION"
hm-rega.0
	2023-05-24 14:19:44.645	info	renamed hm-rpc.0.00115BE9956D53.3.PROCESS to "Rollo Aktor Markise:3.PROCESS"
hm-rega.0
	2023-05-24 14:19:44.630	info	renamed hm-rpc.0.00115BE9956D53.3.LEVEL_STATUS to "Rollo Aktor Markise:3.LEVEL_STATUS"
hm-rega.0
	2023-05-24 14:19:44.615	info	renamed hm-rpc.0.00115BE9956D53.3.LEVEL to "Rollo Aktor Markise:3.LEVEL"
hm-rega.0
	2023-05-24 14:19:44.598	info	renamed hm-rpc.0.00115BE9956D53.3.ACTIVITY_STATE to "Rollo Aktor Markise:3.ACTIVITY_STATE"
hm-rega.0
	2023-05-24 14:19:44.552	info	renamed hm-rpc.0.00115BE9956D53.3 to "Rollo Aktor Markise:3"
hm-rega.0
	2023-05-24 14:19:44.539	info	renamed hm-rpc.0.00115BE9956D53.1.PRESS_SHORT to "Rollo AktorMarkise:1.PRESS_SHORT"
hm-rega.0
	2023-05-24 14:19:44.524	info	renamed hm-rpc.0.00115BE9956D53.1.PRESS_LONG_START to "Rollo AktorMarkise:1.PRESS_LONG_START"
hm-rega.0
	2023-05-24 14:19:44.508	info	renamed hm-rpc.0.00115BE9956D53.1.PRESS_LONG_RELEASE to "Rollo AktorMarkise:1.PRESS_LONG_RELEASE"
hm-rega.0
	2023-05-24 14:19:44.490	info	renamed hm-rpc.0.00115BE9956D53.1.PRESS_LONG to "Rollo AktorMarkise:1.PRESS_LONG"
hm-rega.0
	2023-05-24 14:19:44.471	info	renamed hm-rpc.0.00115BE9956D53.1 to "Rollo AktorMarkise:1"
hm-rega.0
	2023-05-24 14:19:44.442	info	renamed hm-rpc.0.00115BE9956D53.0.UPDATE_PENDING_ALARM to "Rollo Aktor Markise:0.UPDATE_PENDING_ALARM"
hm-rega.0
	2023-05-24 14:19:44.423	info	renamed hm-rpc.0.00115BE9956D53.0.UPDATE_PENDING to "Rollo Aktor Markise:0.UPDATE_PENDING"
hm-rega.0
	2023-05-24 14:19:44.415	info	renamed hm-rpc.0.00115BE9956D53.0.UNREACH_ALARM to "Rollo Aktor Markise:0.UNREACH_ALARM"
hm-rega.0
	2023-05-24 14:19:44.402	info	renamed hm-rpc.0.00115BE9956D53.0.UNREACH to "Rollo Aktor Markise:0.UNREACH"
hm-rega.0
	2023-05-24 14:19:44.389	info	renamed hm-rpc.0.00115BE9956D53.0.RSSI_PEER to "Rollo Aktor Markise:0.RSSI_PEER"
hm-rega.0
	2023-05-24 14:19:44.381	info	renamed hm-rpc.0.00115BE9956D53.0.RSSI_DEVICE to "Rollo Aktor Markise:0.RSSI_DEVICE"
hm-rega.0
	2023-05-24 14:19:44.358	info	renamed hm-rpc.0.00115BE9956D53.0.OPERATING_VOLTAGE_STATUS to "Rollo Aktor Markise:0.OPERATING_VOLTAGE_STATUS"
hm-rega.0
	2023-05-24 14:19:44.339	info	renamed hm-rpc.0.00115BE9956D53.0.OPERATING_VOLTAGE to "Rollo Aktor Markise:0.OPERATING_VOLTAGE"
hm-rega.0
	2023-05-24 14:19:44.325	info	renamed hm-rpc.0.00115BE9956D53.0.INSTALL_TEST to "Rollo Aktor Markise:0.INSTALL_TEST"
hm-rega.0
	2023-05-24 14:19:44.312	info	renamed hm-rpc.0.00115BE9956D53.0.ERROR_OVERHEAT_ALARM to "Rollo Aktor Markise:0.ERROR_OVERHEAT_ALARM"
hm-rega.0
	2023-05-24 14:19:44.297	info	renamed hm-rpc.0.00115BE9956D53.0.ERROR_OVERHEAT to "Rollo Aktor Markise:0.ERROR_OVERHEAT"
hm-rega.0
	2023-05-24 14:19:44.282	info	renamed hm-rpc.0.00115BE9956D53.0.ERROR_CODE to "Rollo Aktor Markise:0.ERROR_CODE"
hm-rega.0
	2023-05-24 14:19:44.260	info	renamed hm-rpc.0.00115BE9956D53.0.DUTY_CYCLE to "Rollo Aktor Markise:0.DUTY_CYCLE"
text2command.0
	2023-05-24 14:19:44.242	warn	Terminated (ADAPTER_ALREADY_RUNNING): Without reason
text2command.0
	2023-05-24 14:19:44.234	error	text2command.0 already running
hm-rega.0
	2023-05-24 14:19:44.203	info	renamed hm-rpc.0.00115BE9956D53.0.CONFIG_PENDING_ALARM to "Rollo Aktor Markise:0.CONFIG_PENDING_ALARM"
hm-rega.0
	2023-05-24 14:19:44.185	info	renamed hm-rpc.0.00115BE9956D53.0.CONFIG_PENDING to "Rollo Aktor Markise:0.CONFIG_PENDING"
hm-rega.0
	2023-05-24 14:19:44.171	info	renamed hm-rpc.0.00115BE9956D53.0.ACTUAL_TEMPERATURE_STATUS to "Rollo Aktor Markise:0.ACTUAL_TEMPERATURE_STATUS"
hm-rega.0
	2023-05-24 14:19:44.156	info	renamed hm-rpc.0.00115BE9956D53.0.ACTUAL_TEMPERATURE to "Rollo Aktor Markise:0.ACTUAL_TEMPERATURE"
hm-rega.0
	2023-05-24 14:19:44.091	info	renamed hm-rpc.0.00115BE9956D53.0 to "Rollo Aktor Markise:0"
hm-rega.0
	2023-05-24 14:19:44.066	info	renamed hm-rpc.0.00115BE9956D53 to "Rollo Aktor Markise"
hm-rpc.1
	2023-05-24 14:19:43.029	info	Connected
hm-rpc.1
	2023-05-24 14:19:42.967	info	xmlrpc -> 81 devices
hm-rpc.1
	2023-05-24 14:19:42.879	info	xmlrpc <- listDevices ["raspberrypi:hm-rpc.1:4c7900ff95869fdf13a684fb18ec40d1"]
hm-rpc.1
	2023-05-24 14:19:42.848	info	xmlrpc <- system.listMethods ["raspberrypi:hm-rpc.1:4c7900ff95869fdf13a684fb18ec40d1"]
hm-rpc.1
	2023-05-24 14:19:42.754	info	xmlrpc client is trying to connect to 192.168.178.27:2001/ with ["http://192.168.178.38:2001","raspberrypi:hm-rpc.1:4c7900ff95869fdf13a684fb18ec40d1"]
hm-rpc.1
	2023-05-24 14:19:42.752	info	xmlrpc server is trying to listen on 192.168.178.38:2001
hm-rpc.1
	2023-05-24 14:19:42.338	info	starting. Version 1.15.16 in /opt/iobroker/node_modules/iobroker.hm-rpc, node: v18.16.0, js-controller: 4.0.24
host.raspberrypi
	2023-05-24 14:19:42.102	info	instance system.adapter.shelly.0 started with pid 1199
host.raspberrypi
	2023-05-24 14:19:41.621	info	Restart adapter system.adapter.tankerkoenig.0 because enabled
host.raspberrypi
	2023-05-24 14:19:41.620	error	instance system.adapter.tankerkoenig.0 terminated with code 7 (ADAPTER_ALREADY_RUNNING)
alexa2.0
	2023-05-24 14:19:41.475	info	Starting Alexa2 adapter ... it can take several minutes to initialize all data. Please be patient! A done message is logged.
alexa2.0
	2023-05-24 14:19:41.212	info	starting. Version 3.23.2 in /opt/iobroker/node_modules/iobroker.alexa2, node: v18.16.0, js-controller: 4.0.24
host.raspberrypi
	2023-05-24 14:19:40.971	info	instance system.adapter.text2command.0 started with pid 1188
tankerkoenig.0
	2023-05-24 14:19:40.906	warn	Terminated (ADAPTER_ALREADY_RUNNING): Without reason
tankerkoenig.0
	2023-05-24 14:19:40.898	error	tankerkoenig.0 already running
hm-rpc.0
	2023-05-24 14:19:38.135	info	Connected
hm-rpc.0
	2023-05-24 14:19:37.979	info	xmlrpc client is trying to connect to 192.168.178.27:2010/ with ["http://192.168.178.27:2010","raspberrypi:hm-rpc.0:17bdd2f8a472b64d206b06fac798b358"]
hm-rpc.0
	2023-05-24 14:19:37.966	info	xmlrpc server is trying to listen on 0.0.0.0:2010
host.raspberrypi
	2023-05-24 14:19:37.318	info	instance system.adapter.hm-rpc.1 started with pid 1166
hm-rpc.0
	2023-05-24 14:19:37.240	info	starting. Version 1.15.16 in /opt/iobroker/node_modules/iobroker.hm-rpc, node: v18.16.0, js-controller: 4.0.24
host.raspberrypi
	2023-05-24 14:19:36.966	info	instance system.adapter.tankerkoenig.0 started with pid 1158
host.raspberrypi
	2023-05-24 14:19:36.331	info	Restart adapter system.adapter.simple-api.0 because enabled
host.raspberrypi
	2023-05-24 14:19:36.330	error	instance system.adapter.simple-api.0 terminated with code 7 (ADAPTER_ALREADY_RUNNING)
host.raspberrypi
	2023-05-24 14:19:35.979	info	instance system.adapter.alexa2.0 started with pid 1151
simple-api.0
	2023-05-24 14:19:35.669	warn	Terminated (ADAPTER_ALREADY_RUNNING): Without reason
simple-api.0
	2023-05-24 14:19:35.662	error	simple-api.0 already running
hm-rega.0
	2023-05-24 14:19:34.326	info	time difference local-ccu 0s
hm-rega.0
	2023-05-24 14:19:33.953	info	ReGaHSS 192.168.178.27 up
hm-rega.0
	2023-05-24 14:19:33.858	info	subscribe hm-rpc.1.BidCoS-RF.50.PRESS_SHORT
host.raspberrypi
	2023-05-24 14:19:33.613	info	instance system.adapter.alexa2.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
hm-rega.0
	2023-05-24 14:19:33.336	info	starting. Version 3.0.46 in /opt/iobroker/node_modules/iobroker.hm-rega, node: v18.16.0, js-controller: 4.0.24
host.raspberrypi
	2023-05-24 14:19:33.263	info	instance system.adapter.hm-rpc.0 started with pid 1132
host.raspberrypi
	2023-05-24 14:19:32.953	info	instance system.adapter.simple-api.0 started with pid 1125
alexa2.0
	2023-05-24 14:19:32.890	info	Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
alexa2.0
	2023-05-24 14:19:32.884	info	terminating
host.raspberrypi
	2023-05-24 14:19:32.884	info	stopInstance system.adapter.alexa2.0 send kill signal
alexa2.0
	2023-05-24 14:19:32.882	info	Got terminate signal TERMINATE_YOURSELF
host.raspberrypi
	2023-05-24 14:19:32.873	info	stopInstance system.adapter.alexa2.0 (force=false, process=true)

[searcher57]

@searcher57 said in Täglicher Absturz ioBroker + Zugriff auf Raspi [gelöst]:

@thomas-braun said in Täglicher Absturz ioBroker + Zugriff auf Raspi [gelöst]:

@searcher57 sagte in Täglicher Absturz ioBroker + Zugriff auf Raspi:

[erledigt]

Inwiefern?

Hallo Thomas und Helfer,
zu früh gefreut! Ich habe das Ganze nochmal über Tage hinweg beobachtet. Leider stürzt der Raspi auch mit der neu aufgesetzten SD Karte ab. Was mir auffällt, dass das meistens kurz nach 14 Uhr, während ich im ioBroker arbeite, passiert. Bitte fragt mich nicht, was das mit der Tageszeit zu tun hat. Beide LED's leuchten durch. Kein Kontakt über SSH mehr möglich. Ich hänge nochmal ein Protokoll an, aber ich denke das hilft Euch wenig, weil es nach dem Hardware-Reset neu gestartet ist. Wäre schön, wenn Ihr mir nochmal helft diesen Fehler heraus zu finden.

host.raspberrypi
	2023-05-24 14:19:44.918	error	instance system.adapter.text2command.0 terminated with code 7 (ADAPTER_ALREADY_RUNNING)
alexa2.0
	2023-05-24 14:19:44.845	info	Initialize all Device states ...
hm-rega.0
	2023-05-24 14:19:44.792	info	renamed hm-rpc.0.00115BE9956D53.4.SECTION_STATUS to "Rollo Aktor Markise:4.SECTION_STATUS"
hm-rega.0
	2023-05-24 14:19:44.776	info	renamed hm-rpc.0.00115BE9956D53.4.SECTION to "Rollo Aktor Markise:4.SECTION"
hm-rega.0
	2023-05-24 14:19:44.758	info	renamed hm-rpc.0.00115BE9956D53.4.PROCESS to "Rollo Aktor Markise:4.PROCESS"
hm-rega.0
	2023-05-24 14:19:44.739	info	renamed hm-rpc.0.00115BE9956D53.4.LEVEL_STATUS to "Rollo Aktor Markise:4.LEVEL_STATUS"
hm-rega.0
	2023-05-24 14:19:44.699	info	renamed hm-rpc.0.00115BE9956D53.4.LEVEL to "Rollo Aktor Markise:4.LEVEL"
hm-rega.0
	2023-05-24 14:19:44.682	info	renamed hm-rpc.0.00115BE9956D53.4.ACTIVITY_STATE to "Rollo Aktor Markise:4.ACTIVITY_STATE"
hm-rega.0
	2023-05-24 14:19:44.673	info	renamed hm-rpc.0.00115BE9956D53.4 to "Rollo Aktor Markise:4"
hm-rega.0
	2023-05-24 14:19:44.665	info	renamed hm-rpc.0.00115BE9956D53.3.SECTION_STATUS to "Rollo Aktor Markise:3.SECTION_STATUS"
hm-rega.0
	2023-05-24 14:19:44.655	info	renamed hm-rpc.0.00115BE9956D53.3.SECTION to "Rollo Aktor Markise:3.SECTION"
hm-rega.0
	2023-05-24 14:19:44.645	info	renamed hm-rpc.0.00115BE9956D53.3.PROCESS to "Rollo Aktor Markise:3.PROCESS"
hm-rega.0
	2023-05-24 14:19:44.630	info	renamed hm-rpc.0.00115BE9956D53.3.LEVEL_STATUS to "Rollo Aktor Markise:3.LEVEL_STATUS"
hm-rega.0
	2023-05-24 14:19:44.615	info	renamed hm-rpc.0.00115BE9956D53.3.LEVEL to "Rollo Aktor Markise:3.LEVEL"
hm-rega.0
	2023-05-24 14:19:44.598	info	renamed hm-rpc.0.00115BE9956D53.3.ACTIVITY_STATE to "Rollo Aktor Markise:3.ACTIVITY_STATE"
hm-rega.0
	2023-05-24 14:19:44.552	info	renamed hm-rpc.0.00115BE9956D53.3 to "Rollo Aktor Markise:3"
hm-rega.0
	2023-05-24 14:19:44.539	info	renamed hm-rpc.0.00115BE9956D53.1.PRESS_SHORT to "Rollo AktorMarkise:1.PRESS_SHORT"
hm-rega.0
	2023-05-24 14:19:44.524	info	renamed hm-rpc.0.00115BE9956D53.1.PRESS_LONG_START to "Rollo AktorMarkise:1.PRESS_LONG_START"
hm-rega.0
	2023-05-24 14:19:44.508	info	renamed hm-rpc.0.00115BE9956D53.1.PRESS_LONG_RELEASE to "Rollo AktorMarkise:1.PRESS_LONG_RELEASE"
hm-rega.0
	2023-05-24 14:19:44.490	info	renamed hm-rpc.0.00115BE9956D53.1.PRESS_LONG to "Rollo AktorMarkise:1.PRESS_LONG"
hm-rega.0
	2023-05-24 14:19:44.471	info	renamed hm-rpc.0.00115BE9956D53.1 to "Rollo AktorMarkise:1"
hm-rega.0
	2023-05-24 14:19:44.442	info	renamed hm-rpc.0.00115BE9956D53.0.UPDATE_PENDING_ALARM to "Rollo Aktor Markise:0.UPDATE_PENDING_ALARM"
hm-rega.0
	2023-05-24 14:19:44.423	info	renamed hm-rpc.0.00115BE9956D53.0.UPDATE_PENDING to "Rollo Aktor Markise:0.UPDATE_PENDING"
hm-rega.0
	2023-05-24 14:19:44.415	info	renamed hm-rpc.0.00115BE9956D53.0.UNREACH_ALARM to "Rollo Aktor Markise:0.UNREACH_ALARM"
hm-rega.0
	2023-05-24 14:19:44.402	info	renamed hm-rpc.0.00115BE9956D53.0.UNREACH to "Rollo Aktor Markise:0.UNREACH"
hm-rega.0
	2023-05-24 14:19:44.389	info	renamed hm-rpc.0.00115BE9956D53.0.RSSI_PEER to "Rollo Aktor Markise:0.RSSI_PEER"
hm-rega.0
	2023-05-24 14:19:44.381	info	renamed hm-rpc.0.00115BE9956D53.0.RSSI_DEVICE to "Rollo Aktor Markise:0.RSSI_DEVICE"
hm-rega.0
	2023-05-24 14:19:44.358	info	renamed hm-rpc.0.00115BE9956D53.0.OPERATING_VOLTAGE_STATUS to "Rollo Aktor Markise:0.OPERATING_VOLTAGE_STATUS"
hm-rega.0
	2023-05-24 14:19:44.339	info	renamed hm-rpc.0.00115BE9956D53.0.OPERATING_VOLTAGE to "Rollo Aktor Markise:0.OPERATING_VOLTAGE"
hm-rega.0
	2023-05-24 14:19:44.325	info	renamed hm-rpc.0.00115BE9956D53.0.INSTALL_TEST to "Rollo Aktor Markise:0.INSTALL_TEST"
hm-rega.0
	2023-05-24 14:19:44.312	info	renamed hm-rpc.0.00115BE9956D53.0.ERROR_OVERHEAT_ALARM to "Rollo Aktor Markise:0.ERROR_OVERHEAT_ALARM"
hm-rega.0
	2023-05-24 14:19:44.297	info	renamed hm-rpc.0.00115BE9956D53.0.ERROR_OVERHEAT to "Rollo Aktor Markise:0.ERROR_OVERHEAT"
hm-rega.0
	2023-05-24 14:19:44.282	info	renamed hm-rpc.0.00115BE9956D53.0.ERROR_CODE to "Rollo Aktor Markise:0.ERROR_CODE"
hm-rega.0
	2023-05-24 14:19:44.260	info	renamed hm-rpc.0.00115BE9956D53.0.DUTY_CYCLE to "Rollo Aktor Markise:0.DUTY_CYCLE"
text2command.0
	2023-05-24 14:19:44.242	warn	Terminated (ADAPTER_ALREADY_RUNNING): Without reason
text2command.0
	2023-05-24 14:19:44.234	error	text2command.0 already running
hm-rega.0
	2023-05-24 14:19:44.203	info	renamed hm-rpc.0.00115BE9956D53.0.CONFIG_PENDING_ALARM to "Rollo Aktor Markise:0.CONFIG_PENDING_ALARM"
hm-rega.0
	2023-05-24 14:19:44.185	info	renamed hm-rpc.0.00115BE9956D53.0.CONFIG_PENDING to "Rollo Aktor Markise:0.CONFIG_PENDING"
hm-rega.0
	2023-05-24 14:19:44.171	info	renamed hm-rpc.0.00115BE9956D53.0.ACTUAL_TEMPERATURE_STATUS to "Rollo Aktor Markise:0.ACTUAL_TEMPERATURE_STATUS"
hm-rega.0
	2023-05-24 14:19:44.156	info	renamed hm-rpc.0.00115BE9956D53.0.ACTUAL_TEMPERATURE to "Rollo Aktor Markise:0.ACTUAL_TEMPERATURE"
hm-rega.0
	2023-05-24 14:19:44.091	info	renamed hm-rpc.0.00115BE9956D53.0 to "Rollo Aktor Markise:0"
hm-rega.0
	2023-05-24 14:19:44.066	info	renamed hm-rpc.0.00115BE9956D53 to "Rollo Aktor Markise"
hm-rpc.1
	2023-05-24 14:19:43.029	info	Connected
hm-rpc.1
	2023-05-24 14:19:42.967	info	xmlrpc -> 81 devices
hm-rpc.1
	2023-05-24 14:19:42.879	info	xmlrpc <- listDevices ["raspberrypi:hm-rpc.1:4c7900ff95869fdf13a684fb18ec40d1"]
hm-rpc.1
	2023-05-24 14:19:42.848	info	xmlrpc <- system.listMethods ["raspberrypi:hm-rpc.1:4c7900ff95869fdf13a684fb18ec40d1"]
hm-rpc.1
	2023-05-24 14:19:42.754	info	xmlrpc client is trying to connect to 192.168.178.27:2001/ with ["http://192.168.178.38:2001","raspberrypi:hm-rpc.1:4c7900ff95869fdf13a684fb18ec40d1"]
hm-rpc.1
	2023-05-24 14:19:42.752	info	xmlrpc server is trying to listen on 192.168.178.38:2001
hm-rpc.1
	2023-05-24 14:19:42.338	info	starting. Version 1.15.16 in /opt/iobroker/node_modules/iobroker.hm-rpc, node: v18.16.0, js-controller: 4.0.24
host.raspberrypi
	2023-05-24 14:19:42.102	info	instance system.adapter.shelly.0 started with pid 1199
host.raspberrypi
	2023-05-24 14:19:41.621	info	Restart adapter system.adapter.tankerkoenig.0 because enabled
host.raspberrypi
	2023-05-24 14:19:41.620	error	instance system.adapter.tankerkoenig.0 terminated with code 7 (ADAPTER_ALREADY_RUNNING)
alexa2.0
	2023-05-24 14:19:41.475	info	Starting Alexa2 adapter ... it can take several minutes to initialize all data. Please be patient! A done message is logged.
alexa2.0
	2023-05-24 14:19:41.212	info	starting. Version 3.23.2 in /opt/iobroker/node_modules/iobroker.alexa2, node: v18.16.0, js-controller: 4.0.24
host.raspberrypi
	2023-05-24 14:19:40.971	info	instance system.adapter.text2command.0 started with pid 1188
tankerkoenig.0
	2023-05-24 14:19:40.906	warn	Terminated (ADAPTER_ALREADY_RUNNING): Without reason
tankerkoenig.0
	2023-05-24 14:19:40.898	error	tankerkoenig.0 already running
hm-rpc.0
	2023-05-24 14:19:38.135	info	Connected
hm-rpc.0
	2023-05-24 14:19:37.979	info	xmlrpc client is trying to connect to 192.168.178.27:2010/ with ["http://192.168.178.27:2010","raspberrypi:hm-rpc.0:17bdd2f8a472b64d206b06fac798b358"]
hm-rpc.0
	2023-05-24 14:19:37.966	info	xmlrpc server is trying to listen on 0.0.0.0:2010
host.raspberrypi
	2023-05-24 14:19:37.318	info	instance system.adapter.hm-rpc.1 started with pid 1166
hm-rpc.0
	2023-05-24 14:19:37.240	info	starting. Version 1.15.16 in /opt/iobroker/node_modules/iobroker.hm-rpc, node: v18.16.0, js-controller: 4.0.24
host.raspberrypi
	2023-05-24 14:19:36.966	info	instance system.adapter.tankerkoenig.0 started with pid 1158
host.raspberrypi
	2023-05-24 14:19:36.331	info	Restart adapter system.adapter.simple-api.0 because enabled
host.raspberrypi
	2023-05-24 14:19:36.330	error	instance system.adapter.simple-api.0 terminated with code 7 (ADAPTER_ALREADY_RUNNING)
host.raspberrypi
	2023-05-24 14:19:35.979	info	instance system.adapter.alexa2.0 started with pid 1151
simple-api.0
	2023-05-24 14:19:35.669	warn	Terminated (ADAPTER_ALREADY_RUNNING): Without reason
simple-api.0
	2023-05-24 14:19:35.662	error	simple-api.0 already running
hm-rega.0
	2023-05-24 14:19:34.326	info	time difference local-ccu 0s
hm-rega.0
	2023-05-24 14:19:33.953	info	ReGaHSS 192.168.178.27 up
hm-rega.0
	2023-05-24 14:19:33.858	info	subscribe hm-rpc.1.BidCoS-RF.50.PRESS_SHORT
host.raspberrypi

Und hier nochmal die Ausgabe von iob diag:

Skript v.2023-04-16

*** BASE SYSTEM ***
Model           : Raspberry Pi 4 Model B Rev 1.4
Architecture    : aarch64
Docker          : false
Virtualization  : none
Distributor ID: Debian
Description:    Debian GNU/Linux 11 (bullseye)
Release:        11
Codename:       bullseye

PRETTY_NAME="Debian GNU/Linux 11 (bullseye)"
NAME="Debian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

Systemuptime and Load:
 15:14:57 up 56 min,  1 user,  load average: 0.65, 0.49, 0.34
CPU threads: 4

Raspberry only:
throttled=0x0
Other values than 0x0 hint to temperature/voltage problems
temp=49.6'C
volt=0.9360V

*** Time and Time Zones ***
               Local time: Wed 2023-05-24 15:14:58 CEST
           Universal time: Wed 2023-05-24 13:14:58 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input render netdev gp                                                                                                                                                             io i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            1.8G        1.5G         68M        0.0K        298M        299M
Swap:            99M        9.0M         90M
Total:          1.9G        1.5G        159M

         1849 M total memory
         1481 M used memory
         1516 M active memory
          145 M inactive memory
           69 M free memory
            5 M buffer memory
          292 M swap cache
           99 M total swap
            9 M used swap
           90 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       29G  3.7G   25G  14% /
devtmpfs       devtmpfs  667M     0  667M   0% /dev
tmpfs          tmpfs     925M     0  925M   0% /dev/shm
tmpfs          tmpfs     370M  1.1M  369M   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      255M   31M  225M  13% /boot
/dev/sda1      exfat      29G   91M   29G   1% /mnt/usb0
tmpfs          tmpfs     185M     0  185M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Wed May 24 14:18:19 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0                                                                                                                                                              snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.ena                                                                                                                                                             ble_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=E4:5F:01:15:C8:D1 vc_mem.                                                                                                                                                             mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty                                                                                                                                                             1 root=PARTUUID=b5d4b387-02 rootfstype=ext4 fsck.repair=yes rootwait
[Wed May 24 14:18:20 2023] EXT4-fs (mmcblk0p2): INFO: recovery required on reado                                                                                                                                                             nly filesystem
[Wed May 24 14:18:20 2023] EXT4-fs (mmcblk0p2): write access will be enabled dur                                                                                                                                                             ing recovery
[Wed May 24 14:18:21 2023] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[Wed May 24 14:18:21 2023] EXT4-fs (mmcblk0p2): 7 orphan inodes deleted
[Wed May 24 14:18:21 2023] EXT4-fs (mmcblk0p2): recovery complete
[Wed May 24 14:18:21 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered                                                                                                                                                              data mode. Quota mode: none.
[Wed May 24 14:18:21 2023] VFS: Mounted root (ext4 filesystem) readonly on devic                                                                                                                                                             e 179:2.
[Wed May 24 14:18:23 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

Show mounted filesystems (real ones only):
TARGET      SOURCE         FSTYPE OPTIONS
/           /dev/mmcblk0p2 ext4   rw,noatime
|-/boot     /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437                                                                                                                                                             ,iocharset=ascii,shortname=mixed,errors=remount-ro
`-/mnt/usb0 /dev/sda1      exfat  rw,nosuid,nodev,noexec,relatime,fmask=0000,dma                                                                                                                                                             sk=0000,allow_utime=0022,iocharset=utf8,errors=remount-ro

Files in neuralgic directories:

/var:
612M    /var/
179M    /var/cache
177M    /var/log
174M    /var/cache/apt
161M    /var/log/journal/330ce8f5ef974364b1563dcde1ee3ca3

Archived and active journals take up 160.0M in the file system.

/opt/iobroker/backups:
43M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
324M    /opt/iobroker/iobroker-data/
264M    /opt/iobroker/iobroker-data/files
51M     /opt/iobroker/iobroker-data/files/javascript.admin
48M     /opt/iobroker/iobroker-data/files/telegram.admin
42M     /opt/iobroker/iobroker-data/files/devices.admin

The five largest files in iobroker-data are:
33M     /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.10538062.                                                                                                                                                             js.map
19M     /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.904d455f.js.m                                                                                                                                                             ap
18M     /opt/iobroker/iobroker-data/objects.jsonl
15M     /opt/iobroker/iobroker-data/files/telegram.admin/rules/static/js/vendors                                                                                                                                                             -node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modu                                                                                                                                                             les_io-1d9f06.44fe4a3f.chunk.js.map
9.7M    /opt/iobroker/iobroker-data/files/text2command.admin/static/js/main.bbfe                                                                                                                                                             b1bf.js.map

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.16.0
/usr/bin/node           v18.16.0
/usr/bin/npm            9.5.1
/usr/bin/npx            9.5.1


nodejs:
  Installed: 18.16.0-deb-1nodesource1
  Candidate: 18.16.0-deb-1nodesource1
  Version table:
 *** 18.16.0-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u4 500
        500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages
     12.22.12~dfsg-1~deb11u3 500
        500 http://deb.debian.org/debian bullseye/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

MULTIHOSTSERVICE/enabled: false

Core adapters versions
js-controller:  4.0.24
admin:          6.3.5
javascript:     6.1.4

Adapters from github:   0

Adapter State
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : raspberrypi                              -  enabled
  system.adapter.alias-manager.0          : alias-manager         : raspberrypi                              - disabled
+ system.adapter.backitup.0               : backitup              : raspberrypi                              -  enabled
+ system.adapter.broadlink2.0             : broadlink2            : raspberrypi                              -  enabled
  system.adapter.devices.0                : devices               : raspberrypi                              -  enabled
+ system.adapter.discovery.0              : discovery             : raspberrypi                              -  enabled
+ system.adapter.echarts.0                : echarts               : raspberrypi                              -  enabled
+ system.adapter.hm-rega.0                : hm-rega               : raspberrypi                              -  enabled
+ system.adapter.hm-rpc.0                 : hm-rpc                : raspberrypi                              -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : raspberrypi                              -  enabled, port: 0
+ system.adapter.influxdb.0               : influxdb              : raspberrypi                              -  enabled, port: 8086
+ system.adapter.iot.0                    : iot                   : raspberrypi                              -  enabled
+ system.adapter.javascript.0             : javascript            : raspberrypi                              -  enabled
+ system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : raspberrypi                              -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.tankerkoenig.0           : tankerkoenig          : raspberrypi                              -  enabled
+ system.adapter.telegram.0               : telegram              : raspberrypi                              -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.text2command.0           : text2command          : raspberrypi                              -  enabled
  system.adapter.vis.0                    : vis                   : raspberrypi                              -  enabled
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
  system.adapter.yr.0                     : yr                    : raspberrypi                              -  enabled

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.hm-rpc.0                 : hm-rpc                : raspberrypi                              -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : raspberrypi                              -  enabled, port: 0
+ system.adapter.influxdb.0               : influxdb              : raspberrypi                              -  enabled, port: 8086
+ system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : raspberrypi                              -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.telegram.0               : telegram              : raspberrypi                              -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.3.5    , installed 6.3.5
Adapter    "alexa2"       : 3.23.2   , installed 3.23.2
Adapter    "alias-manager": 1.2.4    , installed 1.2.4
Adapter    "backitup"     : 2.6.19   , installed 2.6.19
Adapter    "broadlink2"   : 2.1.5    , installed 2.1.5
Adapter    "devices"      : 1.1.2    , installed 1.1.2
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "echarts"      : 1.0.12   , installed 1.0.12
Adapter    "hm-rega"      : 3.0.46   , installed 3.0.46
Adapter    "hm-rpc"       : 1.15.16  , installed 1.15.16
Adapter    "influxdb"     : 3.2.0    , installed 3.2.0
Adapter    "iot"          : 1.14.2   , installed 1.14.2
Adapter    "javascript"   : 6.1.4    , installed 6.1.4
Controller "js-controller": 4.0.24   , installed 4.0.24
Adapter    "sbfspot"      : 4.1.4    , installed 4.1.4
Adapter    "shelly"       : 6.3.1    , installed 6.3.1
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 4.2.0    , installed 6.3.1
Adapter    "tankerkoenig" : 3.3.7    , installed 3.3.7
Adapter    "telegram"     : 1.15.2   , installed 1.15.2
Adapter    "text2command" : 2.3.0    , installed 2.3.0
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "web"          : 4.3.0    , installed 5.3.1
Adapter    "ws"           : 1.3.0    , installed 2.3.1
Adapter    "yr"           : 5.3.0    , installed 5.3.0

Objects and States
Please stand by - This may take a while
Objects:        8972
States:         7462

*** OS-Repositories and Updates ***
Hit:1 http://security.debian.org/debian-security bullseye-security InRelease
Hit:2 http://deb.debian.org/debian bullseye InRelease
Hit:3 http://deb.debian.org/debian bullseye-updates InRelease
Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:5 https://repos.influxdata.com/debian bullseye InRelease
Hit:6 https://deb.nodesource.com/node_18.x bullseye InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          12141      535/sshd: /usr/sbin
tcp        0      0 192.168.178.38:2001     0.0.0.0:*               LISTEN      1001       16784      1166/io.hm-rpc.1
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       12804      587/iobroker.js-con
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       14571      587/iobroker.js-con
tcp        0      0 0.0.0.0:2010            0.0.0.0:*               LISTEN      1001       16736      1132/io.hm-rpc.0
tcp6       0      0 :::22                   :::*                    LISTEN      0          12143      535/sshd: /usr/sbin
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       15553      978/io.admin.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       17643      1375/io.web.0
tcp6       0      0 :::8087                 :::*                    LISTEN      1001       15894      1326/io.simple-api.
tcp6       0      0 :::8086                 :::*                    LISTEN      999        14552      393/influxd
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       16833      1199/io.shelly.0
udp        0      0 0.0.0.0:39487           0.0.0.0:*                           108        3726       337/avahi-daemon: r
udp        0      0 0.0.0.0:15001           0.0.0.0:*                           1001       15858      1292/io.broadlink2.
udp        0      0 0.0.0.0:34575           0.0.0.0:*                           1001       16980      1292/io.broadlink2.
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          12744      758/dhcpcd
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        3724       337/avahi-daemon: r
udp6       0      0 :::546                  :::*                                0          12755      758/dhcpcd
udp6       0      0 :::50218                :::*                                108        3727       337/avahi-daemon: r
udp6       0      0 :::5353                 :::*                                108        3725       337/avahi-daemon: r

*** Log File - Last 25 Lines ***

2023-05-24 14:20:31.238  - info: echarts.0 (1386) starting. Version 1.0.12 in /opt/iobroker/node_modules/iobroker.echarts, node: v18.16.0, js-controller: 4.0.24
2023-05-24 14:20:32.167  - info: alexa2.0 (1151) No smart home devices to query
2023-05-24 14:20:34.186  - info: alexa2.0 (1151) Subscribing to states...
2023-05-24 14:20:35.724  - info: alexa2.0 (1151) Alexa-Push-Connection (macDms = true) established. Disable Polling
2023-05-24 14:20:36.026  - info: alexa2.0 (1151) Initialization Done ...
2023-05-24 14:20:36.604  - info: tankerkoenig.0 (1341) Start first request
2023-05-24 14:27:59.714  - info: admin.0 (978) ==> Connected system.user.admin from ::ffff:192.168.178.30
2023-05-24 14:30:00.052  - info: javascript.0 (1012) script.js.downloads.Shelly-Verbrauch: Shelly Verbrauch: Verbrauchswerte aktualisiert: 5 | Reboots korrigiert: 0 | Unveränderte Werte: 7
2023-05-24 14:31:45.286  - info: admin.0 (978) <== Disconnect system.user.admin from ::ffff:192.168.178.30 admin
2023-05-24 14:31:45.737  - info: admin.0 (978) ==> Connected system.user.admin from ::ffff:192.168.178.30
2023-05-24 14:31:48.194  - info: admin.0 (978) <== Disconnect system.user.admin from ::ffff:192.168.178.30 admin
2023-05-24 14:35:00.071  - info: host.raspberrypi instance system.adapter.yr.0 started with pid 1488
2023-05-24 14:35:22.415  - info: host.raspberrypi instance system.adapter.yr.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-05-24 14:45:00.050  - info: javascript.0 (1012) script.js.downloads.Shelly-Verbrauch: Shelly Verbrauch: Verbrauchswerte aktualisiert: 5 | Reboots korrigiert: 0 | Unveränderte Werte: 7
2023-05-24 14:51:38.229  - info: admin.0 (978) ==> Connected system.user.admin from ::ffff:192.168.178.30
2023-05-24 14:51:45.079  - info: admin.0 (978) ==> Connected system.user.admin from ::ffff:192.168.178.30
2023-05-24 14:51:47.355  - info: admin.0 (978) ==> Connected system.user.admin from ::ffff:192.168.178.30
2023-05-24 14:51:49.031  - info: admin.0 (978) <== Disconnect system.user.admin from ::ffff:192.168.178.30 echarts-show
2023-05-24 14:51:57.035  - info: admin.0 (978) ==> Connected system.user.admin from ::ffff:192.168.178.30
2023-05-24 14:53:04.255  - info: admin.0 (978) <== Disconnect system.user.admin from ::ffff:192.168.178.30 echarts-show
2023-05-24 14:53:04.258  - info: admin.0 (978) <== Disconnect system.user.admin from ::ffff:192.168.178.30 echarts
2023-05-24 14:53:06.482  - info: admin.0 (978) ==> Connected system.user.admin from ::ffff:192.168.178.30
2023-05-24 14:53:12.980  - info: admin.0 (978) <== Disconnect system.user.admin from ::ffff:192.168.178.30 devices
2023-05-24 15:00:00.031  - info: javascript.0 (1012) script.js.downloads.Shelly-Verbrauch: Shelly Verbrauch: Verbrauchswerte aktualisiert: 5 | Reboots korrigiert: 0 | Unveränderte Werte: 7
2023-05-24 15:15:00.053  - info: javascript.0 (1012) script.js.downloads.Shelly-Verbrauch: Shelly Verbrauch: Verbrauchswerte aktualisiert: 5 | Reboots korrigiert: 0 | Unveränderte Werte: 7