ioBroker Backup wieder einspielen

Homoran

@federal sagte in ioBroker Backup wieder einspielen:

Also habe ich mit cd /opt/iobroker/backups und ls -l die Sicherungen aufgerufen.

liegen/lagen die nur bei dir lokal auf dem ioBroker Server?
nicht wirklich irgendwo gesichert?

Glasfaser

@federal sagte in ioBroker Backup wieder einspielen:

mit sudo iobroker restore

Kein sudo vor ioBroker Befehle !

Error: Cannot find module './lib/setup'

cd /opt/iobroker

iobroker fix
sudo -H -u iobroker npm install iobroker.js-controller

federal

@homoran
gehe davon aus, dass auf dem Stick gleiche abgespeichert sind

federal

@glasfaser

==========================================================================

    Your installation was fixed successfully
    Run iobroker start to start ioBroker again!

==========================================================================

pi@raspberrypi:/opt/iobroker $ sudo -H -u iobroker npm install iobroker.js-controller
npm WARN deprecated crypto@1.0.1: This package is no longer supported. It's now a built-in Node module. If you've depended on crypto, you should switch to the one that's built-in.
npm WARN deprecated @types/bl@5.1.0: This is a stub types definition. bl provides its own type definitions, so you do not need this installed.
npm WARN deprecated request-promise-native@1.0.9: request-promise-native has been deprecated because it extends the now deprecated request package, see https://github.com/request/request/issues/3142
npm WARN deprecated har-validator@5.1.5: this library is no longer supported
npm WARN deprecated request-promise@4.2.6: request-promise has been deprecated because it extends the now deprecated request package, see https://github.com/request/request/issues/3142
npm WARN deprecated json3@3.3.2: Please use the native JSON object instead of JSON 3
npm WARN deprecated node-inspect@2.0.0: This module is part of Node.js core and does not need to be installed separately. It is now unmaintained.
npm WARN deprecated debug@4.1.1: Debug versions >=3.2.0 <3.2.7 || >=4 <4.3.1 have a low-severity ReDos regression when used in a Node.js environment. It is recommended you upgrade to 3.2.7 or 4.3.1. (https://github.com/visionmedia/debug/issues/797)
npm WARN deprecated debug@4.1.1: Debug versions >=3.2.0 <3.2.7 || >=4 <4.3.1 have a low-severity ReDos regression when used in a Node.js environment. It is recommended you upgrade to 3.2.7 or 4.3.1. (https://github.com/visionmedia/debug/issues/797)
npm WARN deprecated debug@4.1.1: Debug versions >=3.2.0 <3.2.7 || >=4 <4.3.1 have a low-severity ReDos regression when used in a Node.js environment. It is recommended you upgrade to 3.2.7 or 4.3.1. (https://github.com/visionmedia/debug/issues/797)
npm WARN deprecated querystring@0.2.0: The querystring API is considered Legacy. new code should use the URLSearchParams API instead.
npm WARN deprecated uuid@3.4.0: Please upgrade  to version 7 or higher.  Older versions may use Math.random() in certain circumstances, which is known to be problematic.  See https://v8.dev/blog/math-random for details.
npm WARN deprecated uuid@3.3.2: Please upgrade  to version 7 or higher.  Older versions may use Math.random() in certain circumstances, which is known to be problematic.  See https://v8.dev/blog/math-random for details.
npm WARN deprecated request@2.88.2: request has been deprecated, see https://github.com/request/request/issues/3142
npm WARN deprecated axios@0.19.2: Critical security vulnerability fixed in v0.21.1. For more information, see https://github.com/axios/axios/pull/3410
^C(##################) ⠏ reify:aws-sdk: timing reifyNode:node_modules/iobroker.zigbee/node_module
pi@raspberrypi:/opt/iobroker $

Glasfaser

@federal

alles gut ... nur Werbung

federal

pi@raspberrypi:/opt/iobroker $ iobroker status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl
pi@raspberrypi:/opt/iobroker $ iobroker start all
The adapter "admin.0" was started.
The adapter "tuya.0" was started.
The adapter "backitup.0" was started.
The adapter "vis-timeandweather.0" was started.
The adapter "worx.0" was started.
pi@raspberrypi:/opt/iobroker $

Glasfaser

@federal sagte in ioBroker Backup wieder einspielen:

iobroker is running on this host.

The adapter .... was started.

Ja ... und was ist jetzt !?

federal

@glasfaser
so wie ich es verstehe, wurden nur 5 Adapter gestartet.
iob läuft weiterhin nicht!
Wie soll ich weiter vorgehen?

Glasfaser

@federal sagte in ioBroker Backup wieder einspielen:

so wie ich es verstehe, wurden nur 5 Adapter gestartet.

Du hast doch ein Backup/Restore eingespielt ... und das dauert

Aber :
durch den krasch werden die anderen Adapter nicht mehr nachinstalliert .

Wie soll ich weiter vorgehen?

Neues Backup/Restore einspielen .

federal

@glasfaser said in ioBroker Backup wieder einspielen:

@federal sagte in ioBroker Backup wieder einspielen:

so wie ich es verstehe, wurden nur 5 Adapter gestartet.

Du hast doch ein Backup/Restore eingespielt ... und das dauert

Aber :
durch den krasch werden die anderen Adapter nicht mehr nachinstalliert .

Wie soll ich weiter vorgehen?

Neues Backup/Restore einspielen .

wie kann ich sicherstellen, dass PuTTY nicht aussteigt? Wenn man nichts eingibt, bricht die Verbindung weg.
Soll ich mit der letzten Sicherung probieren? Habe aber Chromecast Adapter v3.0.3 nicht zum laufen gebracht.

Homoran

@federal sagte in ioBroker Backup wieder einspielen:

@homoran
gehe davon aus, dass auf dem Stick gleiche abgespeichert sind

hoffentlich!
dann könntest du eine Neuinstallation durchführen und ein funktionierendes Backup wieder einspielen.

Glasfaser

@federal sagte in ioBroker Backup wieder einspielen:

wie kann ich sicherstellen, dass PuTTY nicht aussteigt?

Zwei Session mit Putty machen .

Wenn man nichts eingibt, bricht die Verbindung weg.

Dann liegt ein Netzwerkproblem bei dir vor !

Homoran

@federal sagte in ioBroker Backup wieder einspielen:

wie kann ich sicherstellen, dass PuTTY nicht aussteigt?

was haben wir denn überhaupt als Basis?

was kommt bei iob diag?

Glasfaser

@federal

@glasfaser sagte in ioBroker Backup wieder einspielen:
Dann liegt ein Netzwerkproblem bei dir vor !

Dann passt meine Vermutung ... in einem anderen Thread von dir :

https://forum.iobroker.net/post/770163

federal

@homoran said in ioBroker Backup wieder einspielen:

@federal sagte in ioBroker Backup wieder einspielen:

wie kann ich sicherstellen, dass PuTTY nicht aussteigt?

was haben wir denn überhaupt als Basis?

was kommt bei iob diag?

======== Start marking the full check here =========

Skript v.2023-04-02

*** BASE SYSTEM ***
Model           : Raspberry Pi 4 Model B Rev 1.2
Architecture    : armv7l
Docker          : false
Virtualization  : none
Distributor ID: Raspbian
Description:    Raspbian GNU/Linux 10 (buster)
Release:        10
Codename:       buster

PRETTY_NAME="Raspbian GNU/Linux 10 (buster)"
NAME="Raspbian GNU/Linux"
VERSION_ID="10"
VERSION="10 (buster)"
VERSION_CODENAME=buster
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"

Systemuptime and Load:
 18:54:45 up 41 days,  9:15,  2 users,  load average: 2.40, 2.64, 2.80
CPU threads: 4

*** Time and Time Zones ***
               Local time: Mon 2023-04-03 18:54:45 CEST
           Universal time: Mon 2023-04-03 16:54:45 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    graphical.target

*** MEMORY ***
              total        used        free      shared  buff/cache   available
Mem:           3.8G        1.6G        167M        190M        2.1G        2.3G
Swap:           99M         37M         62M
Total:         3.9G        1.6G        230M

         3838 M total memory
         1571 M used memory
          853 M active memory
         2584 M inactive memory
          167 M free memory
          264 M buffer memory
         1836 M swap cache
           99 M total swap
           37 M used swap
           62 M free swap

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       29G  7.8G   21G  28% /
devtmpfs       devtmpfs  1.8G     0  1.8G   0% /dev
tmpfs          tmpfs     1.9G   16K  1.9G   1% /dev/shm
tmpfs          tmpfs     1.9G  209M  1.7G  11% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     1.9G     0  1.9G   0% /sys/fs/cgroup
/dev/mmcblk0p1 vfat      253M   49M  204M  20% /boot
tmpfs          tmpfs     384M     0  384M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Tue Feb 21 08:39:20 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=DC:A6:32:B7:67:4E vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=PARTUUID=a372f35c-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[Tue Feb 21 08:39:21 2023] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[Tue Feb 21 08:39:21 2023] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[Tue Feb 21 08:39:22 2023] EXT4-fs (mmcblk0p2): recovery complete
[Tue Feb 21 08:39:22 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Tue Feb 21 08:39:22 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Tue Feb 21 08:39:24 2023] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)

Show mounted filesystems (real ones only):
TARGET        SOURCE         FSTYPE OPTIONS
/             /dev/mmcblk0p2 ext4   rw,noatime
|-/sys/fs/bpf none           bpf    rw,nosuid,nodev,noexec,relatime,mode=700
`-/boot       /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
576M    /var/
213M    /var/cache
200M    /var/cache/apt
142M    /var/log
141M    /var/cache/apt/archives

/opt/iobroker/backups:
103M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
449M    /opt/iobroker/iobroker-data/
311M    /opt/iobroker/iobroker-data/files
85M     /opt/iobroker/iobroker-data/backup-objects
72M     /opt/iobroker/iobroker-data/files/telegram.admin
51M     /opt/iobroker/iobroker-data/files/javascript.admin

The five largest files in iobroker-data are:
19M     /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.904d455f.js.map
18M     /opt/iobroker/iobroker-data/states.jsonl
15M     /opt/iobroker/iobroker-data/files/telegram.admin/rules/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-1d9f06.44fe4a3f.chunk.js.map
12M     /opt/iobroker/iobroker-data/objects.jsonl
9.7M    /opt/iobroker/iobroker-data/files/text2command.admin/static/js/main.bbfeb1bf.js.map

*** NodeJS-Installation ***

/usr/bin/nodejs         v16.19.1
/usr/bin/node           v16.19.1
/usr/bin/npm            8.19.3
/usr/bin/npx            8.19.3

nodejs:
  Installed: 16.19.1-deb-1nodesource1
  Candidate: 16.19.1-deb-1nodesource1
  Version table:
 *** 16.19.1-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_16.x buster/main armhf Packages
        100 /var/lib/dpkg/status
     10.24.0~dfsg-1~deb10u3 500
        500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages

find: '/opt/iobroker/node_modules/.osx-temperature-sensor-hwc16MPv': No such file or directory
find: '/opt/iobroker/node_modules/.fsevents-yNYMVUiI': No such file or directory
find: '/opt/iobroker/node_modules/.iobroker.history-EyYkjPpJ': No such file or directory
Temp directories causing npm8 problem: 891
Some problems detected, please run iob fix

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  4.0.24
admin:          "admin" not found
javascript:     6.1.4

Adapters from github:   0

Adapter State
  system.adapter.admin.0                  : admin                 : raspberrypi                              - disabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
  system.adapter.backitup.0               : backitup              : raspberrypi                              - disabled
  system.adapter.broadlink2.0             : broadlink2            : raspberrypi                              -  enabled
  system.adapter.chromecast.0             : chromecast            : raspberrypi                              -  enabled
  system.adapter.cloud.0                  : cloud                 : raspberrypi                              - disabled
  system.adapter.discovery.0              : discovery             : raspberrypi                              -  enabled
  system.adapter.echarts.0                : echarts               : raspberrypi                              -  enabled
  system.adapter.fb-checkpresence.0       : fb-checkpresence      : raspberrypi                              - disabled
  system.adapter.feiertage.0              : feiertage             : raspberrypi                              -  enabled
  system.adapter.fullybrowser.0           : fullybrowser          : raspberrypi                              -  enabled
  system.adapter.harmony.0                : harmony               : raspberrypi                              -  enabled
+ system.adapter.history.0                : history               : raspberrypi                              -  enabled
+ system.adapter.hmip.0                   : hmip                  : raspberrypi                              -  enabled
  system.adapter.ical.0                   : ical                  : raspberrypi                              -  enabled
+ system.adapter.info.0                   : info                  : raspberrypi                              -  enabled
+ system.adapter.iot.0                    : iot                   : raspberrypi                              -  enabled
+ system.adapter.javascript.0             : javascript            : raspberrypi                              -  enabled
+ system.adapter.netatmo.0                : netatmo               : raspberrypi                              -  enabled
+ system.adapter.panasonic-comfort-cloud.0: panasonic-comfort-cloud: raspberrypi                              -  enabled
+ system.adapter.ping.0                   : ping                  : raspberrypi                              -  enabled
+ system.adapter.sayit.0                  : sayit                 : raspberrypi                              -  enabled, port: 0
+ system.adapter.sayit.1                  : sayit                 : raspberrypi                              -  enabled, port: 0
+ system.adapter.sayit.2                  : sayit                 : raspberrypi                              -  enabled, port: 0
+ system.adapter.sayit.3                  : sayit                 : raspberrypi                              -  enabled, port: 0
+ system.adapter.scenes.0                 : scenes                : raspberrypi                              -  enabled
+ system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.sonoff.0                 : sonoff                : raspberrypi                              -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.tado.0                   : tado                  : raspberrypi                              -  enabled
+ system.adapter.tankerkoenig.0           : tankerkoenig          : raspberrypi                              -  enabled
+ system.adapter.telegram.0               : telegram              : raspberrypi                              -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.text2command.1           : text2command          : raspberrypi                              -  enabled
+ system.adapter.trashschedule.0          : trashschedule         : raspberrypi                              -  enabled
+ system.adapter.tuya.0                   : tuya                  : raspberrypi                              -  enabled
+ system.adapter.vis-inventwo.0           : vis-inventwo          : raspberrypi                              -  enabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : raspberrypi                              -  enabled
  system.adapter.vis.0                    : vis                   : raspberrypi                              -  enabled
  system.adapter.weatherunderground.0     : weatherunderground    : raspberrypi                              -  enabled
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.worx.0                   : worx                  : raspberrypi                              -  enabled
+ system.adapter.zigbee.0                 : zigbee                : raspberrypi                              -  enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0014D8F906-if00

+ instance is alive

Enabled adapters with bindings
+ system.adapter.sayit.0                  : sayit                 : raspberrypi                              -  enabled, port: 0
+ system.adapter.sayit.1                  : sayit                 : raspberrypi                              -  enabled, port: 0
+ system.adapter.sayit.2                  : sayit                 : raspberrypi                              -  enabled, port: 0
+ system.adapter.sayit.3                  : sayit                 : raspberrypi                              -  enabled, port: 0
+ system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.sonoff.0                 : sonoff                : raspberrypi                              -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.telegram.0               : telegram              : raspberrypi                              -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : raspberrypi                              -  enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0014D8F906-if00

ioBroker-Repositories
Stable (default): http://download.iobroker.net/sources-dist.json
Beta (latest) : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): Stable (default)

Installed ioBroker-Instances
Used repository: Stable (default)
Adapter    "history"      : 2.2.4    , installed 2.2.4
Adapter    "hmip"         : 1.20.0   , installed 1.20.0
Adapter    "ical"         : 1.13.2   , installed 1.13.2
Adapter    "info"         : 1.9.19   , installed 1.9.19
Adapter    "iot"          : 1.14.2   , installed 1.14.2
Adapter    "javascript"   : 6.1.4    , installed 6.1.4
Controller "js-controller": 4.0.24   , installed 4.0.24
Adapter    "netatmo"      : 2.0.5    , installed 2.0.5
Adapter    "panasonic-comfort-cloud": 2.1.0, installed 2.1.0
Adapter    "ping"         : 1.5.3    , installed 1.5.3
Adapter    "sayit"        : 1.12.3   , installed 1.12.3
Adapter    "scenes"       : 2.3.9    , installed 2.3.9
Adapter    "shelly"       : 6.3.1    , installed 6.3.1
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 4.2.0    , installed 4.2.0
Adapter    "sonoff"       : 2.5.1    , installed 2.5.1
Adapter    "tado"         : 0.4.5    , installed 0.4.5
Adapter    "tankerkoenig" : 3.3.7    , installed 3.3.7
Adapter    "telegram"     : 1.15.2   , installed 1.15.2
Adapter    "text2command" : 2.3.0    , installed 2.3.0
Adapter    "trashschedule": 2.2.0    , installed 2.2.0
Adapter    "tuya"         : 3.13.1   , installed 3.13.1
Adapter    "vis"          : 1.4.15   , installed 1.4.15
Adapter    "vis-inventwo" : 3.3.1    , installed 3.3.1
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "weatherunderground": 3.4.2, installed 3.4.2
Adapter    "web"          : 4.3.0    , installed 4.3.0
Adapter    "worx"         : 2.0.3    , installed 2.0.3
Adapter    "ws"           : 1.3.0    , installed 1.3.0
Adapter    "zigbee"       : 1.8.10   , installed 1.8.10

Objects and States
Please stand by - This may take a while
Objects:        8545
States:         8737

*** OS-Repositories and Updates ***
Hit:1 http://archive.raspberrypi.org/debian buster InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian buster InRelease
Hit:3 https://deb.nodesource.com/node_16.x buster InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          17659      556/sshd
tcp        0      0 127.0.0.1:631           0.0.0.0:*               LISTEN      0          364555978  8627/cupsd
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       366535826  32518/io.sonoff.0
tcp        0      0 0.0.0.0:8765            0.0.0.0:*               LISTEN      0          13294      366/python
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       366534662  32324/iobroker.js-c
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       366531583  32324/iobroker.js-c
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       366544012  1601/io.web.0
tcp6       0      0 :::22                   :::*                    LISTEN      0          17661      556/sshd
udp        0      0 0.0.0.0:36865           0.0.0.0:*                           108        13851      344/avahi-daemon: r
udp        0      0 0.0.0.0:6666            0.0.0.0:*                           1001       366550232  3641/io.tuya.0
udp        0      0 0.0.0.0:6667            0.0.0.0:*                           1001       366550233  3641/io.tuya.0
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       366534930  32501/io.shelly.0
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          16570      545/dhcpcd
udp        0      0 0.0.0.0:631             0.0.0.0:*                           0          364552998  8628/cups-browsed
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        13849      344/avahi-daemon: r
udp6       0      0 :::5353                 :::*                                108        13850      344/avahi-daemon: r
udp6       0      0 :::54050                :::*                                108        13852      344/avahi-daemon: r

*** Log File - Last 25 Lines ***

2023-04-03 18:56:10.723  - warn: shelly.0 (32501) [authEnabled] 192.168.178.61 (shellyswitch25 / shellyswitch25-40F520008D21 / SHSW-25#40F520008D21#1): This device is not protected via restricted login (see adapter documentation for details)
2023-04-03 18:56:10.731  - warn: shelly.0 (32501) [authEnabled] 192.168.178.66 (shellyswitch25 / shellyswitch25-40F520001056 / SHSW-25#40F520001056#1): This device is not protected via restricted login (see adapter documentation for details)
2023-04-03 18:56:11.031  - warn: shelly.0 (32501) [authEnabled] 192.168.178.88 (shelly1 / shelly1-483FDA8DAE88 / SHSW-1#483FDA8DAE88#1): This device is not protected via restricted login (see adapter documentation for details)
2023-04-03 18:56:11.158  - warn: shelly.0 (32501) [authEnabled] 192.168.178.64 (shelly1 / shelly1-E09806963CF8 / SHSW-1#E09806963CF8#1): This device is not protected via restricted login (see adapter documentation for details)
2023-04-03 18:56:11.165  - warn: shelly.0 (32501) [authEnabled] 192.168.178.91 (shellyplug-s / shellyplug-s-A4138B / SHPLG-S#A4138B#1): This device is not protected via restricted login (see adapter documentation for details)
2023-04-03 18:56:11.207  - warn: shelly.0 (32501) [authEnabled] 192.168.178.76 (shelly1 / shelly1-483FDA822EBC / SHSW-1#483FDA822EBC#1): This device is not protected via restricted login (see adapter documentation for details)
2023-04-03 18:56:11.340  - warn: shelly.0 (32501) [authEnabled] 192.168.178.72 (shellyswitch25 / shellyswitch25-40F52000DA81 / SHSW-25#40F52000DA81#1): This device is not protected via restricted login (see adapter documentation for details)
2023-04-03 18:56:11.430  - warn: shelly.0 (32501) [authEnabled] 192.168.178.63 (shelly1 / shelly1-40F52000CBB8 / SHSW-1#40F52000CBB8#1): This device is not protected via restricted login (see adapter documentation for details)
2023-04-03 18:56:11.592  - warn: shelly.0 (32501) [authEnabled] 192.168.178.94 (shelly1 / shelly1-F4CFA2ED662C / SHSW-1#F4CFA2ED662C#1): This device is not protected via restricted login (see adapter documentation for details)
2023-04-03 18:56:11.598  - warn: shelly.0 (32501) [authEnabled] 192.168.178.95 (shelly1 / shelly1-483FDAA23470 / SHSW-1#483FDAA23470#1): This device is not protected via restricted login (see adapter documentation for details)
2023-04-03 18:56:11.849  - warn: shelly.0 (32501) [authEnabled] 192.168.178.73 (shelly1 / shelly1-483FDA82B865 / SHSW-1#483FDA82B865#1): This device is not protected via restricted login (see adapter documentation for details)
2023-04-03 18:56:12.362  - warn: shelly.0 (32501) [authEnabled] 192.168.178.101 (shelly1 / shelly1-E8DB84D41EDF / SHSW-1#E8DB84D41EDF#1): This device is not protected via restricted login (see adapter documentation for details)
2023-04-03 18:56:12.490  - warn: shelly.0 (32501) [authEnabled] 192.168.178.33 (shelly1 / shelly1-C45BBE6B9506 / SHSW-1#C45BBE6B9506#1): This device is not protected via restricted login (see adapter documentation for details)
2023-04-03 18:56:12.701  - warn: shelly.0 (32501) [authEnabled] 192.168.178.65 (shelly1 / shelly1-E09806963C5D / SHSW-1#E09806963C5D#1): This device is not protected via restricted login (see adapter documentation for details)
2023-04-03 18:56:12.440  - info: netatmo.0 (32465) Websocket error: websocket error,  Error: websocket error
    at WS.Transport.onError (/opt/iobroker/node_modules/engine.io-client/lib/transport.js:64:13)
    at WebSocket.ws.onerror (/opt/iobroker/node_modules/engine.io-client/lib/transports/websocket.js:149:10)
    at WebSocket.onError (/opt/iobroker/node_modules/engine.io-client/node_modules/ws/lib/WebSocket.js:452:14)
    at WebSocket.emit (node:events:513:28)
    at WebSocket.emit (node:domain:489:12)
    at ClientRequest.response (/opt/iobroker/node_modules/engine.io-client/node_modules/ws/lib/WebSocket.js:721:12)
    at Object.onceWrapper (node:events:628:26)
    at ClientRequest.emit (node:events:525:35)
    at ClientRequest.emit (node:domain:489:12)
    at HTTPParser.parserOnIncomingClient [as onIncoming] (node:_http_client:693:27)

============ Mark until here for C&P =============

iob diag has finished.

Press any key for a summary

federal

@glasfaser said in ioBroker Backup wieder einspielen:

@federal

@glasfaser sagte in ioBroker Backup wieder einspielen:
Dann liegt ein Netzwerkproblem bei dir vor !

Dann passt meine Vermutung ... in einem anderen Thread von dir :

https://forum.iobroker.net/post/770163

es lag daran, dass iob und Motioneye gemeinsam auf einem pi genutzt wurden. Seit dem ich Motioneye deaktiviert habe, lief alles gut!

Thomas Braun

@federal

Some problems detected, please run iob fix

Solltest du tun. Und du solltest auch den Buster erlösen und durch das aktuelle Release Debian 11 'Bullseye' ersetzen, der Buster ist letztes Jahr im September abgekündigt worden.
Im Zuge dessen dann auch auf nodejs@18 springen.

Homoran

@federal was ist denn das?

@federal sagte in ioBroker Backup wieder einspielen:

18:54:45 up 41 days, 9:15,

ich denke der ist gerade neu gestartet?

@federal sagte in ioBroker Backup wieder einspielen:

load average: 2.40, 2.64, 2.80

hat auch gut zu rödeln!
Was läuft da sonst noch?

und nur 5 Adapter sähen anders aus.

admin als https konfiguriert?

@federal sagte in ioBroker Backup wieder einspielen:

system.adapter.admin.0 : admin : raspberrypi - disabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin

und deaktiviert

Thomas Braun

@homoran

Nee, die Kiste ist am


[Tue Feb 21 08:39:21 2023] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem

unsanft 'neugestartet' worden.

federal

@glasfaser said in ioBroker Backup wieder einspielen:

@federal sagte in ioBroker Backup wieder einspielen:

so wie ich es verstehe, wurden nur 5 Adapter gestartet.

Du hast doch ein Backup/Restore eingespielt ... und das dauert

Aber :
durch den krasch werden die anderen Adapter nicht mehr nachinstalliert .

Wie soll ich weiter vorgehen?

Neues Backup/Restore einspielen .

habe ein Backup eigespielt

System successfully restored!
pi@raspberrypi:/opt/iobroker/backups $ iobroker start all
The adapter "history.0" was started.
The adapter "javascript.0" was started.
The adapter "scenes.0" was started.
The adapter "telegram.0" was started.
The adapter "chromecast.0" was started.
The adapter "hmip.0" was started.
The adapter "ical.0" was started.
The adapter "netatmo.0" was started.
The adapter "ping.0" was started.
The adapter "shelly.0" was started.
The adapter "sonoff.0" was started.
The adapter "tuya.0" was started.
The adapter "weatherunderground.0" was started.
The adapter "zigbee.0" was started.
The adapter "broadlink2.0" was started.
The adapter "cloud.0" was started.
The adapter "discovery.0" was started.
The adapter "echarts.0" was started.
The adapter "fb-checkpresence.0" was started.
The adapter "feiertage.0" was started.
The adapter "fullybrowser.0" was started.
The adapter "harmony.0" was started.
The adapter "info.0" was started.
The adapter "iot.0" was started.
The adapter "panasonic-comfort-cloud.0" was started.
The adapter "sayit.0" was started.
The adapter "sayit.1" was started.
The adapter "sayit.2" was started.
The adapter "sayit.3" was started.
The adapter "tado.0" was started.
The adapter "tankerkoenig.0" was started.
The adapter "text2command.1" was started.
The adapter "trashschedule.0" was started.
The adapter "vis-inventwo.0" was started.
The adapter "vis-timeandweather.0" was started.
The adapter "vis.0" was started.
The adapter "web.0" was started.
The adapter "worx.0" was started.
pi@raspberrypi:/opt/iobroker/backups $ iobroker start

kann aber nach wie vor nicht auf iob zugreifen

Community Forum

NEWS

ioBroker Backup wieder einspielen

Support us

763

32.5k

81.7k

1.3m