Neuer ioBroker-Blog online: Monatsrückblick März/April 2026

[Newcomer82]

Systemdata	Bitte Ausfüllen
Hardwaresystem:	RockPi 4 SE
Arbeitsspeicher:	GB 4
Festplattenart:	eMMC 16Gb
Betriebssystem:	Armbian Bullseye
Node-Version:	?
Nodejs-Version:	v16.19.1
NPM-Version:	v8.19.3
Installationsart:	Manuell
Image genutzt:	Nein
Ort/Name der Imagedatei:	Link

Es scheint ein Neustart zu erfolgen, der aber nicht vollständig durchgeführt werden kann. Zeitpunkt ist immer 17min,12s nach voller Stunde, wobei sich der Zeitpunkt wohl abhängig vom Reset verschiebt. Min und Sek sind aber immer identisch. Das Logfile sieht immer gleich aus und ist auch jedes Mal chronologisch auseinander gerissen. Zeitpunkt 11:25 ist in dem Log nach dem harten Neustart. In sonstige Systemlogs habe ich nichts auffälliges gefunden. Bin da aber auch kein Profi und habe evtl. nicht an der richtigen Stelle nachgeschaut.

Danke für die Hilfe

2023-02-25 10:16:18.354 - info: smartmeter.0 (1629) Received 15 values, 9 updated
2023-02-25 10:16:34.412 - info: smartmeter.0 (1629) Received 15 values, 10 updated
2023-02-25 10:16:50.367 - info: smartmeter.0 (1629) Received 15 values, 10 updated
2023-02-25 10:17:00.017 - info: javascript.0 (1544) script.js.Luftenfeuchter: Einschaltzeit min:0
2023-02-25 10:17:06.343 - info: smartmeter.0 (1629) Received 15 values, 10 updated
2023-02-25 10:17:22.329 - info: smartmeter.0 (1629) Received 15 values, 10 updated
2023-02-25 10:17:38.399 - info: smartmeter.0 (1629) Received 15 values, 10 updated
2023-02-25 10:17:54.368 - info: smartmeter.0 (1629) Received 15 values, 10 updated
2023-02-25 10:18:00.027 - info: javascript.0 (1544) script.js.Luftenfeuchter: Einschaltzeit min:0
2023-02-25 10:18:10.330 - info: smartmeter.0 (1629) Received 15 values, 10 updated
2023-02-25 10:18:26.394 - info: smartmeter.0 (1629) Received 15 values, 10 updated
2023-02-25 10:18:42.413 - info: smartmeter.0 (1629) Received 15 values, 10 updated
2023-02-25 10:18:58.349 - info: smartmeter.0 (1629) Received 15 values, 10 updated
2023-02-25 10:19:00.027 - info: javascript.0 (1544) script.js.Luftenfeuchter: Einschaltzeit min:0
2023-02-25 10:19:14.395 - info: smartmeter.0 (1629) Received 15 values, 10 updated
2023-02-25 10:19:30.347 - info: smartmeter.0 (1629) Received 15 values, 10 updated
2023-02-25 10:19:46.338 - info: smartmeter.0 (1629) Received 15 values, 10 updated
2023-02-25 10:20:00.032 - info: javascript.0 (1544) script.js.Luftenfeuchter: Einschaltzeit min:0
2023-02-25 10:20:02.347 - info: smartmeter.0 (1629) Received 15 values, 9 updated
2023-02-25 10:20:18.366 - info: smartmeter.0 (1629) Received 15 values, 10 updated
2023-02-25 10:20:34.332 - info: smartmeter.0 (1629) Received 15 values, 10 updated
2023-02-25 10:20:50.388 - info: smartmeter.0 (1629) Received 15 values, 10 updated
2023-02-25 10:21:00.005 - info: javascript.0 (1544) script.js.Luftenfeuchter: Einschaltzeit min:0
2023-02-25 10:21:06.333 - info: smartmeter.0 (1629) Received 15 values, 10 updated
2023-02-25 10:21:22.342 - info: smartmeter.0 (1629) Received 15 values, 9 updated
2023-02-25 10:21:38.373 - info: smartmeter.0 (1629) Received 15 values, 10 updated
2023-02-25 10:21:54.362 - info: smartmeter.0 (1629) Received 15 values, 10 updated
2023-02-25 10:22:00.026 - info: javascript.0 (1544) script.js.Luftenfeuchter: Einschaltzeit min:0
2023-02-25 10:22:10.351 - info: smartmeter.0 (1629) Received 15 values, 10 updated
2023-02-25 10:22:26.336 - info: smartmeter.0 (1629) Received 15 values, 10 updated
2023-02-25 10:22:42.415 - info: smartmeter.0 (1629) Received 15 values, 10 updated
2023-02-25 10:22:58.365 - info: smartmeter.0 (1629) Received 15 values, 10 updated
2023-02-25 10:23:00.004 - info: javascript.0 (1544) script.js.Luftenfeuchter: Einschaltzeit min:0
2023-02-25 10:23:14.332 - info: smartmeter.0 (1629) Received 15 values, 10 updated
2023-02-25 10:23:30.373 - info: smartmeter.0 (1629) Received 15 values, 10 updated
2023-02-25 10:23:46.321 - info: smartmeter.0 (1629) Received 15 values, 9 updated
2023-02-25 10:24:00.032 - info: javascript.0 (1544) script.js.Luftenfeuchter: Einschaltzeit min:0
2023-02-25 10:24:02.389 - info: smartmeter.0 (1629) Received 15 values, 10 updated
2023-02-25 10:24:18.328 - info: smartmeter.0 (1629) Received 15 values, 9 updated
2023-02-25 10:24:34.325 - info: smartmeter.0 (1629) Received 15 values, 10 updated
2023-02-25 10:24:50.360 - info: smartmeter.0 (1629) Received 15 values, 12 updated
2023-02-25 10:25:00.005 - info: javascript.0 (1544) script.js.Luftenfeuchter: Einschaltzeit min:0
2023-02-25 10:25:06.326 - info: smartmeter.0 (1629) Received 15 values, 9 updated
2023-02-25 10:25:22.391 - info: smartmeter.0 (1629) Received 15 values, 9 updated
2023-02-25 10:25:38.381 - info: smartmeter.0 (1629) Received 15 values, 9 updated
2023-02-25 10:25:54.458 - info: smartmeter.0 (1629) Received 15 values, 12 updated
2023-02-25 10:26:00.023 - info: javascript.0 (1544) script.js.Luftenfeuchter: Einschaltzeit min:0
2023-02-25 10:26:10.330 - info: smartmeter.0 (1629) Received 15 values, 10 updated
2023-02-25 10:26:26.405 - info: smartmeter.0 (1629) Received 15 values, 10 updated
2023-02-25 10:26:42.326 - info: smartmeter.0 (1629) Received 15 values, 9 updated
2023-02-25 10:26:58.346 - info: smartmeter.0 (1629) Received 15 values, 12 updated
2023-02-25 10:27:00.007 - info: javascript.0 (1544) script.js.Luftenfeuchter: Einschaltzeit min:0
2023-02-25 10:27:14.395 - info: smartmeter.0 (1629) Received 15 values, 9 updated
2023-02-25 10:27:30.320 - info: smartmeter.0 (1629) Received 15 values, 9 updated
2023-02-25 10:27:46.317 - info: smartmeter.0 (1629) Received 15 values, 9 updated
2023-02-25 10:28:00.013 - info: javascript.0 (1544) script.js.Luftenfeuchter: Einschaltzeit min:1
2023-02-25 10:28:02.394 - info: smartmeter.0 (1629) Received 15 values, 9 updated
2023-02-25 10:28:18.329 - info: smartmeter.0 (1629) Received 15 values, 9 updated
2023-02-25 10:28:34.396 - info: smartmeter.0 (1629) Received 15 values, 9 updated
2023-02-25 10:28:50.379 - info: smartmeter.0 (1629) Received 15 values, 9 updated
2023-02-25 10:29:00.027 - info: javascript.0 (1544) script.js.Luftenfeuchter: Einschaltzeit min:2
2023-02-25 10:17:12.525 - info: host.rockpi-4c iobroker.js-controller version 4.0.24 js-controller starting
2023-02-25 10:17:12.534 - info: host.rockpi-4c Copyright (c) 2014-2022 bluefox, 2014 hobbyquaker
2023-02-25 10:17:12.535 - info: host.rockpi-4c hostname: rockpi-4c, node: v16.19.1
2023-02-25 10:17:12.537 - info: host.rockpi-4c ip addresses: 192.168.178.39 fe80::b834:f1a6:55ca:bf5e
2023-02-25 10:17:13.936 - info: host.rockpi-4c connected to Objects and States
2023-02-25 10:17:13.985 - info: host.rockpi-4c added notifications configuration of host
2023-02-25 10:17:14.575 - info: host.rockpi-4c Delete state "system.host.rockpi-4c.versions.nodeCurrent"
2023-02-25 10:17:14.586 - info: host.rockpi-4c 15 instances found
2023-02-25 10:17:14.625 - info: host.rockpi-4c starting 14 instances
2023-02-25 10:17:14.714 - info: host.rockpi-4c Delete state "system.host.rockpi-4c.versions.nodeNewest"
2023-02-25 10:17:14.795 - info: host.rockpi-4c instance system.adapter.admin.0 started with pid 1480
2023-02-25 10:17:14.828 - info: host.rockpi-4c Delete state "system.host.rockpi-4c.versions.nodeNewestNext"
2023-02-25 10:17:14.914 - info: host.rockpi-4c Delete state "system.host.rockpi-4c.versions.npmCurrent"
2023-02-25 10:17:14.976 - info: host.rockpi-4c Delete state "system.host.rockpi-4c.versions.npmNewest"
2023-02-25 10:17:15.038 - info: host.rockpi-4c Delete state "system.host.rockpi-4c.versions.npmNewestNext"
2023-02-25 10:17:15.100 - info: host.rockpi-4c Some obsolete host states deleted.
2023-02-25 10:17:16.897 - error: admin.0 (1480) admin.0 already running
2023-02-25 10:17:16.901 - warn: admin.0 (1480) Terminated (ADAPTER_ALREADY_RUNNING): Without reason
2023-02-25 11:25:10.116 - error: host.rockpi-4c instance system.adapter.admin.0 terminated with code 7 (ADAPTER_ALREADY_RUNNING)
2023-02-25 11:25:10.117 - info: host.rockpi-4c Restart adapter system.adapter.admin.0 because enabled
2023-02-25 11:25:11.202 - info: host.rockpi-4c instance system.adapter.influxdb.0 started with pid 1505

[crunchip]

@newcomer82 möglicherweise Ram/Plattenproblem
Mal mit top und auch dmesg drüberschauen

[Newcomer82]

@crunchip von dem RAM sind immer 60-70% und von dem Hauptspeicher 10,7Gb frei.

rockpi-4c:~:# dmesg
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 5.15.80-rockchip64 (root@746a5325a2a9) (aarch64-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 8.3.0, GNU ld (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 2.32.0.20190321) #22.11.1 SMP PREEMPT Wed Nov 30 11:12:47 UTC 2022
[    0.000000] Machine model: Radxa ROCK Pi 4B
[    0.000000] efi: UEFI not found.
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000] NUMA: NODE_DATA [mem 0xf77d6100-0xf77d7fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
[    0.000000] cma: Reserved 128 MiB at 0x00000000e8c00000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] percpu: Embedded 29 pages/cpu s80984 r8192 d29608 u118784
[    0.000000] pcpu-alloc: s80984 r8192 d29608 u118784 alloc=29*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 999432
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: root=UUID=3ff9a8b9-9f0e-40b1-ac45-21581f6ee71e rootwait rootfstype=ext4 splash=verbose console=ttyS2,1500000 console=tty1 consoleblank=0 loglevel=1 ubootpart=75ea9151-01 usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u   cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1
[    0.000000] Unknown kernel command line parameters "splash=verbose ubootpart=75ea9151-01 cgroup_enable=memory cgroup_memory=1", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.000000] Memory: 3802104K/4061184K available (16000K kernel code, 2690K rwdata, 6696K rodata, 4352K init, 593K bss, 128008K reserved, 131072K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU event tracing is enabled.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Rude variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[    0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @500000 (flat, esz 8, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GICv3: using LPI property table @0x00000000004d0000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000000004e0000
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.002004] Console: colour dummy device 80x25
[    0.002074] printk: console [tty1] enabled
[    0.002196] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.002219] pid_max: default: 32768 minimum: 301
[    0.002356] LSM: Security Framework initializing
[    0.002399] Yama: becoming mindful.
[    0.002545] AppArmor: AppArmor initialized
[    0.002696] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.002734] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.006974] rcu: Hierarchical SRCU implementation.
[    0.008635] Platform MSI: interrupt-controller@fee20000 domain created
[    0.009171] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.011256] EFI services will not be available.
[    0.012181] smp: Bringing up secondary CPUs ...
[    0.013358] Detected VIPT I-cache on CPU1
[    0.013430] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.013455] GICv3: CPU1: using allocated LPI pending table @0x00000000004f0000
[    0.013533] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.015074] Detected VIPT I-cache on CPU2
[    0.015144] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.015170] GICv3: CPU2: using allocated LPI pending table @0x0000000000580000
[    0.015246] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.016861] Detected VIPT I-cache on CPU3
[    0.016932] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.016956] GICv3: CPU3: using allocated LPI pending table @0x0000000000590000
[    0.017031] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.018573] CPU features: detected: Spectre-v2
[    0.018587] CPU features: detected: Spectre-v3a
[    0.018593] CPU features: detected: Spectre-v4
[    0.018598] CPU features: detected: Spectre-BHB
[    0.018607] CPU features: detected: ARM erratum 1742098
[    0.018614] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.018619] Detected PIPT I-cache on CPU4
[    0.018656] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.018675] GICv3: CPU4: using allocated LPI pending table @0x00000000005a0000
[    0.018720] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
[    0.020113] Detected PIPT I-cache on CPU5
[    0.020158] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.020177] GICv3: CPU5: using allocated LPI pending table @0x00000000005b0000
[    0.020224] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
[    0.020411] smp: Brought up 1 node, 6 CPUs
[    0.020448] SMP: Total of 6 processors activated.
[    0.020458] CPU features: detected: 32-bit EL0 Support
[    0.020465] CPU features: detected: 32-bit EL1 Support
[    0.020475] CPU features: detected: CRC32 instructions
[    0.047495] CPU: All CPU(s) started at EL2
[    0.047599] alternatives: patching kernel code
[    0.050878] devtmpfs: initialized
[    0.065213] Registered cp15_barrier emulation handler
[    0.065239] Registered setend emulation handler
[    0.065252] KASLR disabled due to lack of seed
[    0.065469] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.065550] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.068642] pinctrl core: initialized pinctrl subsystem
[    0.069333] DMI not present or invalid.
[    0.070196] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.074907] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.076670] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.079513] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.079610] audit: initializing netlink subsys (disabled)
[    0.079877] audit: type=2000 audit(0.076:1): state=initialized audit_enabled=0 res=1
[    0.081165] thermal_sys: Registered thermal governor 'fair_share'
[    0.081175] thermal_sys: Registered thermal governor 'bang_bang'
[    0.081181] thermal_sys: Registered thermal governor 'step_wise'
[    0.081188] thermal_sys: Registered thermal governor 'user_space'
[    0.081713] cpuidle: using governor menu
[    0.082015] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.082250] ASID allocator initialised with 65536 entries
[    0.083460] Serial: AMBA PL011 UART driver
[    0.111212] platform ff770000.syscon:phy@f780: Fixing up cyclic dependency with fe330000.mmc
[    0.118783] platform ff940000.hdmi: Fixing up cyclic dependency with ff8f0000.vop
[    0.118874] platform ff940000.hdmi: Fixing up cyclic dependency with ff900000.vop
[    0.129609] rockchip-gpio ff720000.gpio0: probed /pinctrl/gpio0@ff720000
[    0.130443] rockchip-gpio ff730000.gpio1: probed /pinctrl/gpio1@ff730000
[    0.131228] rockchip-gpio ff780000.gpio2: probed /pinctrl/gpio2@ff780000
[    0.132067] rockchip-gpio ff788000.gpio3: probed /pinctrl/gpio3@ff788000
[    0.132859] rockchip-gpio ff790000.gpio4: probed /pinctrl/gpio4@ff790000
[    0.150299] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.150315] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.150324] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.150333] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.155684] cryptd: max_cpu_qlen set to 1000
[    0.232757] raid6: neonx8   gen()  1667 MB/s
[    0.300923] raid6: neonx8   xor()  1204 MB/s
[    0.369093] raid6: neonx4   gen()  1720 MB/s
[    0.437260] raid6: neonx4   xor()  1240 MB/s
[    0.505430] raid6: neonx2   gen()  1532 MB/s
[    0.573586] raid6: neonx2   xor()  1149 MB/s
[    0.641767] raid6: neonx1   gen()  1201 MB/s
[    0.709927] raid6: neonx1   xor()   926 MB/s
[    0.778103] raid6: int64x8  gen()  1001 MB/s
[    0.846288] raid6: int64x8  xor()   577 MB/s
[    0.914433] raid6: int64x4  gen()  1002 MB/s
[    0.982579] raid6: int64x4  xor()   591 MB/s
[    1.050741] raid6: int64x2  gen()   943 MB/s
[    1.118907] raid6: int64x2  xor()   524 MB/s
[    1.187075] raid6: int64x1  gen()   724 MB/s
[    1.255219] raid6: int64x1  xor()   390 MB/s
[    1.255227] raid6: using algorithm neonx4 gen() 1720 MB/s
[    1.255235] raid6: .... xor() 1240 MB/s, rmw enabled
[    1.255241] raid6: using neon recovery algorithm
[    1.256861] vcc5v0_sys: supplied by vcc12v_dcin
[    1.257390] vcc3v3_pcie: supplied by vcc5v0_sys
[    1.257790] vcc3v3_sys: supplied by vcc5v0_sys
[    1.258233] vcc5v0_host: supplied by vcc5v0_sys
[    1.258664] vcc5v0_typec: supplied by vcc5v0_sys
[    1.259526] iommu: Default domain type: Translated
[    1.259535] iommu: DMA domain TLB invalidation policy: strict mode
[    1.262740] vgaarb: loaded
[    1.263229] SCSI subsystem initialized
[    1.263758] libata version 3.00 loaded.
[    1.264024] usbcore: registered new interface driver usbfs
[    1.264073] usbcore: registered new interface driver hub
[    1.264122] usbcore: registered new device driver usb
[    1.264822] pps_core: LinuxPPS API ver. 1 registered
[    1.264831] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.264850] PTP clock support registered
[    1.265149] EDAC MC: Ver: 3.0.0
[    1.266476] NetLabel: Initializing
[    1.266484] NetLabel:  domain hash size = 128
[    1.266491] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    1.266566] NetLabel:  unlabeled traffic allowed by default
[    1.267139] clocksource: Switched to clocksource arch_sys_counter
[    1.319526] VFS: Disk quotas dquot_6.6.0
[    1.319615] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.320479] AppArmor: AppArmor Filesystem Enabled
[    1.331553] NET: Registered PF_INET protocol family
[    1.331911] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    1.335047] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    1.335334] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    1.335458] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    1.335999] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    1.336667] TCP: Hash tables configured (established 32768 bind 32768)
[    1.336878] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    1.337048] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    1.337402] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    1.337447] NET: Registered PF_XDP protocol family
[    1.337464] PCI: CLS 0 bytes, default 64
[    1.338224] Trying to unpack rootfs image as initramfs...
[    1.338850] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    1.339394] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    1.340110] kvm [1]: IPA Size Limit: 40 bits
[    1.341431] kvm [1]: vgic-v2@fff20000
[    1.341466] kvm [1]: GIC system register CPU interface enabled
[    1.341768] kvm [1]: vgic interrupt IRQ18
[    1.342105] kvm [1]: Hyp mode initialized successfully
[    1.354477] Initialise system trusted keyrings
[    1.354569] Key type blacklist registered
[    1.354876] workingset: timestamp_bits=44 max_order=20 bucket_order=0
[    1.361714] zbud: loaded
[    1.363589] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.364531] fuse: init (API version 7.34)
[    1.367404] integrity: Platform Keyring initialized
[    1.432143] xor: measuring software checksum speed
[    1.440282]    8regs           :  1218 MB/sec
[    1.447394]    32regs          :  1396 MB/sec
[    1.451717]    arm64_neon      :  2301 MB/sec
[    1.451727] xor: using function: arm64_neon (2301 MB/sec)
[    1.451743] Key type asymmetric registered
[    1.451750] Asymmetric key parser 'x509' registered
[    1.451892] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    1.452137] io scheduler mq-deadline registered
[    1.452147] io scheduler kyber registered
[    1.452371] io scheduler bfq registered
[    1.478829] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.478847] dma-pl330 ff6d0000.dma-controller:       DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[    1.480371] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.480385] dma-pl330 ff6e0000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    1.485165] vdd_log: supplied by regulator-dummy
[    1.486751] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    1.490425] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 42, base_baud = 1500000) is a 16550A
[    1.490615] serial serial0: tty port ttyS0 registered
[    1.491666] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 43, base_baud = 1500000) is a 16550A
[    1.491961] printk: console [ttyS2] enabled
[    1.493303] Serial: AMBA driver
[    1.495332] rockchip-vop ff8f0000.vop: Adding to iommu group 2
[    1.496314] rockchip-vop ff900000.vop: Adding to iommu group 3
[    1.504691] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops)
[    1.504819] [drm] unsupported AFBC format[3231564e]
[    1.506748] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops)
[    1.507758] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    1.517938] loop: module loaded
[    1.524382] tun: Universal TUN/TAP device driver, 1.6
[    1.525553] thunder_xcv, ver 1.0
[    1.525600] thunder_bgx, ver 1.0
[    1.525652] nicpf, ver 1.0
[    1.526737] e1000e: Intel(R) PRO/1000 Network Driver
[    1.526744] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.526799] igb: Intel(R) Gigabit Ethernet Network Driver
[    1.526806] igb: Copyright (c) 2007-2014 Intel Corporation.
[    1.526845] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[    1.526852] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    1.527161] sky2: driver version 1.30
[    1.527891] VFIO - User Level meta-driver version: 0.3
[    1.544178] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.544209] ehci-pci: EHCI PCI platform driver
[    1.544251] ehci-platform: EHCI generic platform driver
[    1.546697] ehci-platform fe380000.usb: EHCI Host Controller
[    1.546730] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
[    1.546897] ehci-platform fe380000.usb: irq 35, io mem 0xfe380000
[    1.559180] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[    1.559495] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    1.559512] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.559523] usb usb1: Product: EHCI Host Controller
[    1.559532] usb usb1: Manufacturer: Linux 5.15.80-rockchip64 ehci_hcd
[    1.559540] usb usb1: SerialNumber: fe380000.usb
[    1.560131] hub 1-0:1.0: USB hub found
[    1.560177] hub 1-0:1.0: 1 port detected
[    1.563001] ehci-platform fe3c0000.usb: EHCI Host Controller
[    1.563028] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
[    1.563215] ehci-platform fe3c0000.usb: irq 37, io mem 0xfe3c0000
[    1.579174] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[    1.579453] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    1.579470] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.579481] usb usb2: Product: EHCI Host Controller
[    1.579490] usb usb2: Manufacturer: Linux 5.15.80-rockchip64 ehci_hcd
[    1.579499] usb usb2: SerialNumber: fe3c0000.usb
[    1.580083] hub 2-0:1.0: USB hub found
[    1.580127] hub 2-0:1.0: 1 port detected
[    1.580902] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.580946] ohci-pci: OHCI PCI platform driver
[    1.581018] ohci-platform: OHCI generic platform driver
[    1.581407] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[    1.581439] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
[    1.581574] ohci-platform fe3a0000.usb: irq 36, io mem 0xfe3a0000
[    1.643387] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
[    1.643408] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.643419] usb usb3: Product: Generic Platform OHCI controller
[    1.643428] usb usb3: Manufacturer: Linux 5.15.80-rockchip64 ohci_hcd
[    1.643437] usb usb3: SerialNumber: fe3a0000.usb
[    1.644036] hub 3-0:1.0: USB hub found
[    1.644080] hub 3-0:1.0: 1 port detected
[    1.644800] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[    1.644824] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
[    1.644963] ohci-platform fe3e0000.usb: irq 38, io mem 0xfe3e0000
[    1.707467] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
[    1.707488] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.707499] usb usb4: Product: Generic Platform OHCI controller
[    1.707509] usb usb4: Manufacturer: Linux 5.15.80-rockchip64 ohci_hcd
[    1.707518] usb usb4: SerialNumber: fe3e0000.usb
[    1.708099] hub 4-0:1.0: USB hub found
[    1.708144] hub 4-0:1.0: 1 port detected
[    1.709839] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    1.709869] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
[    1.710049] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x8000000002010010
[    1.710132] xhci-hcd xhci-hcd.0.auto: irq 77, io mem 0xfe800000
[    1.710377] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    1.710393] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
[    1.710410] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[    1.710630] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    1.710645] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.710656] usb usb5: Product: xHCI Host Controller
[    1.710665] usb usb5: Manufacturer: Linux 5.15.80-rockchip64 xhci-hcd
[    1.710673] usb usb5: SerialNumber: xhci-hcd.0.auto
[    1.711260] hub 5-0:1.0: USB hub found
[    1.711320] hub 5-0:1.0: 1 port detected
[    1.711774] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.711931] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[    1.711946] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.711956] usb usb6: Product: xHCI Host Controller
[    1.711965] usb usb6: Manufacturer: Linux 5.15.80-rockchip64 xhci-hcd
[    1.711974] usb usb6: SerialNumber: xhci-hcd.0.auto
[    1.712503] hub 6-0:1.0: USB hub found
[    1.712545] hub 6-0:1.0: 1 port detected
[    1.713167] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    1.713192] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
[    1.713371] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x8000000002010010
[    1.713437] xhci-hcd xhci-hcd.1.auto: irq 78, io mem 0xfe900000
[    1.713685] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    1.713702] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8
[    1.713719] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[    1.713914] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    1.713930] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.713940] usb usb7: Product: xHCI Host Controller
[    1.713949] usb usb7: Manufacturer: Linux 5.15.80-rockchip64 xhci-hcd
[    1.713957] usb usb7: SerialNumber: xhci-hcd.1.auto
[    1.714500] hub 7-0:1.0: USB hub found
[    1.714544] hub 7-0:1.0: 1 port detected
[    1.714976] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.715293] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[    1.715309] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.715319] usb usb8: Product: xHCI Host Controller
[    1.715328] usb usb8: Manufacturer: Linux 5.15.80-rockchip64 xhci-hcd
[    1.715337] usb usb8: SerialNumber: xhci-hcd.1.auto
[    1.715914] hub 8-0:1.0: USB hub found
[    1.715957] hub 8-0:1.0: 1 port detected
[    1.716532] usbcore: registered new interface driver usb-storage
[    1.719195] mousedev: PS/2 mouse device common for all mice
[    1.720611] i2c_dev: i2c /dev entries driver
[    1.721605] i2c 1-0011: Fixing up cyclic dependency with ff880000.i2s
[    1.725469] rk808 0-001b: chip id: 0x0
[    1.729954] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    1.729991] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    1.730002] rk808-regulator rk808-regulator: max buck steps per change: 8
[    1.730549] vdd_center: supplied by vcc5v0_sys
[    1.731367] vdd_cpu_l: supplied by vcc5v0_sys
[    1.731693] vcc_ddr: supplied by vcc5v0_sys
[    1.732271] vcc_1v8: supplied by vcc5v0_sys
[    1.732900] vcc1v8_codec: supplied by vcc5v0_sys
[    1.734028] vcc1v8_hdmi: supplied by vcc5v0_sys
[    1.735181] vcca_1v8: supplied by vcc5v0_sys
[    1.736352] vcc_sdio: supplied by vcc5v0_sys
[    1.737344] vcca3v0_codec: supplied by vcc5v0_sys
[    1.738489] vcc_1v5: supplied by vcc5v0_sys
[    1.739806] vcc0v9_hdmi: supplied by vcc5v0_sys
[    1.740991] vcc_3v0: supplied by vcc5v0_sys
[    1.741962] vcc_cam: supplied by vcc3v3_sys
[    1.742298] vcc_mipi: supplied by vcc3v3_sys
[    1.746360] rk808-rtc rk808-rtc: registered as rtc0
[    1.746931] rk808-rtc rk808-rtc: setting system clock to 2013-01-18T08:50:15 UTC (1358499015)
[    1.748577] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[    1.749311] vdd_cpu_b: supplied by vcc5v0_sys
[    1.752143] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[    1.752855] vdd_gpu: supplied by vcc5v0_sys
[    1.759986] dw_wdt ff848000.watchdog: No valid TOPs array specified
[    1.762416] sdhci: Secure Digital Host Controller Interface driver
[    1.762427] sdhci: Copyright(c) Pierre Ossman
[    1.762455] Synopsys Designware Multimedia Card Interface Driver
[    1.763831] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.764801] dwmmc_rockchip fe310000.mmc: IDMAC supports 32-bit address mode.
[    1.764856] dwmmc_rockchip fe310000.mmc: Using internal DMA controller.
[    1.764876] dwmmc_rockchip fe310000.mmc: Version ID is 270a
[    1.764988] dwmmc_rockchip fe310000.mmc: DW MMC controller at irq 32,32 bit host data width,256 deep fifo
[    1.765171] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
[    1.765211] dwmmc_rockchip fe320000.mmc: Using internal DMA controller.
[    1.765229] dwmmc_rockchip fe320000.mmc: Version ID is 270a
[    1.765314] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 33,32 bit host data width,256 deep fifo
[    1.765548] dwmmc_rockchip fe310000.mmc: allocated mmc-pwrseq
[    1.765567] mmc_host mmc2: card is non-removable.
[    1.765710] dwmmc_rockchip fe320000.mmc: Got CD GPIO
[    1.766967] ledtrig-cpu: registered to indicate activity on CPUs
[    1.767033] mmc1: CQHCI version 5.10
[    1.768156] hid: raw HID events driver (C) Jiri Kosina
[    1.768335] usbcore: registered new interface driver usbhid
[    1.768344] usbhid: USB HID core driver
[    1.774435] drop_monitor: Initializing network drop monitor service
[    1.775411] NET: Registered PF_INET6 protocol family
[    1.779028] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    1.779027] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    1.793529] mmc1: SDHCI controller on fe330000.mmc [fe330000.mmc] using ADMA
[    1.832757] mmc_host mmc0: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
[    1.889140] mmc_host mmc2: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[    1.889740] mmc_host mmc0: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
[    1.901145] mmc1: Command Queue Engine enabled
[    1.901174] mmc1: new HS400 Enhanced strobe MMC card at address 0001
[    1.902403] mmcblk1: mmc1:0001 58A43A 14.6 GiB
[    1.905886]  mmcblk1: p1
[    1.906765] mmcblk1boot0: mmc1:0001 58A43A 4.00 MiB
[    1.909619] mmcblk1boot1: mmc1:0001 58A43A 4.00 MiB
[    1.912257] mmcblk1rpmb: mmc1:0001 58A43A 4.00 MiB, chardev (241:0)
[    1.953322] mmc_host mmc0: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0)
[    2.027295] dwmmc_rockchip fe310000.mmc: Successfully tuned phase to 171
[    2.030343] mmc2: new ultra high speed SDR104 SDIO card at address 0001
[    2.143180] usb 3-1: new full-speed USB device number 2 using ohci-platform
[    2.163211] usb 4-1: new full-speed USB device number 2 using ohci-platform
[    2.294053] Freeing initrd memory: 18712K
[    2.350835] Segment Routing with IPv6
[    2.350934] In-situ OAM (IOAM) with IPv6
[    2.351039] NET: Registered PF_PACKET protocol family
[    2.351303] 8021q: 802.1Q VLAN Support v1.8
[    2.351374] Key type dns_resolver registered
[    2.353090] registered taskstats version 1
[    2.353109] Loading compiled-in X.509 certificates
[    2.356718] Loaded X.509 cert 'Build time autogenerated kernel key: 61795ddb143ee60eb525e7adfa85249853099ba1'
[    2.363610] zswap: loaded using pool zstd/z3fold
[    2.364699] Key type .fscrypt registered
[    2.364708] Key type fscrypt-provisioning registered
[    2.367870] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes
[    2.376245] usb 3-1: New USB device found, idVendor=10c4, idProduct=ea60, bcdDevice= 1.00
[    2.376279] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.376294] usb 3-1: Product: CP2102 USB to UART Bridge Controller
[    2.376308] usb 3-1: Manufacturer: Silicon Labs
[    2.376320] usb 3-1: SerialNumber: 0058
[    2.392291] usb 4-1: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54
[    2.392325] usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    2.392340] usb 4-1: Product: USB2.0-Ser!
[    2.397537] Key type encrypted registered
[    2.397559] AppArmor: AppArmor sha1 policy hashing enabled
[    2.446510] vcc_0v9: supplied by vcc3v3_sys
[    2.447818] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
[    2.447894] rockchip-pcie f8000000.pcie:      MEM 0x00fa000000..0x00fbdfffff -> 0x00fa000000
[    2.447928] rockchip-pcie f8000000.pcie:       IO 0x00fbe00000..0x00fbefffff -> 0x00fbe00000
[    2.448904] rockchip-pcie f8000000.pcie: no bus scan delay, default to 0 ms
[    2.975221] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
[    2.975275] rockchip-pcie: probe of f8000000.pcie failed with error -110
[    2.986618] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops)
[    2.988749] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops)
[    2.989115] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[    2.990612] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi_rockchip_ops)
[    2.991243] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
[    2.992130] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
[    2.993701] WCN: marlin_init entry!
[    2.994267] of_cfs_init
[    2.994302] of_cfs_init: OK
[    2.998244] Freeing unused kernel memory: 4352K
[    3.007228] Run /init as init process
[    3.007238]   with arguments:
[    3.007246]     /init
[    3.007253]   with environment:
[    3.007260]     HOME=/
[    3.007266]     TERM=linux
[    3.007272]     splash=verbose
[    3.007279]     ubootpart=75ea9151-01
[    3.007285]     cgroup_enable=memory
[    3.007291]     cgroup_memory=1
[    3.726436] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
[    3.726458] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
[    3.726613] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
[    3.726876] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[    3.726890] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[    3.726903] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).
[    3.726919] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[    3.726998] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[    3.727008] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[    3.732029] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[    3.733104] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[    3.733131] rk_gmac-dwmac fe300000.ethernet:         DWMAC1000
[    3.733141] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
[    3.733150] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
[    3.733158] rk_gmac-dwmac fe300000.ethernet: COE Type 2
[    3.733166] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
[    3.733174] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
[    3.733282] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
[    3.733292] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
[    3.733300] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    3.792175] panfrost ff9a0000.gpu: clock rate = 500000000
[    3.807663] panfrost ff9a0000.gpu: mali-t860 id 0x860 major 0x2 minor 0x0 status 0x0
[    3.807701] panfrost ff9a0000.gpu: features: 00000000,100e77bf, issues: 00000000,24040400
[    3.807739] panfrost ff9a0000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7
[    3.807761] panfrost ff9a0000.gpu: shader_present=0xf l2_present=0x1
[    3.810708] [drm] Initialized panfrost 1.2.0 20180908 for ff9a0000.gpu on minor 1
[    3.861114] mdio_bus stmmac-0:00: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[    3.861154] mdio_bus stmmac-0:01: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
[    3.941597] dw-apb-uart ff1a0000.serial: forbid DMA for kernel console
[    4.007377] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
[    4.157795] EXT4-fs (mmcblk1p1): mounted filesystem with writeback data mode. Opts: (null). Quota mode: none.
[    4.597863] systemd[1]: System time before build time, advancing clock.
[    4.620699] systemd[1]: Inserted module 'autofs4'
[    4.677653] systemd[1]: systemd 247.3-7+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[    4.678675] systemd[1]: Detected architecture arm64.
[    4.684538] systemd[1]: Set hostname to <rockpi-4c>.
[    4.894990] systemd[373]: /usr/lib/systemd/system-generators/netplan failed with exit status 1.
[    5.106282] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[    5.267750] systemd[1]: Queued start job for default target Graphical Interface.
[    5.269513] random: systemd: uninitialized urandom read (16 bytes read)
[    5.273315] systemd[1]: Created slice system-getty.slice.
[    5.273797] random: systemd: uninitialized urandom read (16 bytes read)
[    5.275554] systemd[1]: Created slice system-modprobe.slice.
[    5.275762] random: systemd: uninitialized urandom read (16 bytes read)
[    5.277626] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    5.279089] systemd[1]: Created slice User and Session Slice.
[    5.279721] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.280867] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.281501] systemd[1]: Reached target Slices.
[    5.281765] systemd[1]: Reached target Swap.
[    5.281987] systemd[1]: Reached target System Time Set.
[    5.307005] systemd[1]: Listening on RPCbind Server Activation Socket.
[    5.308261] systemd[1]: Listening on Syslog Socket.
[    5.309082] systemd[1]: Listening on fsck to fsckd communication Socket.
[    5.309584] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    5.310663] systemd[1]: Listening on Journal Audit Socket.
[    5.311485] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.312469] systemd[1]: Listening on Journal Socket.
[    5.315795] systemd[1]: Listening on udev Control Socket.
[    5.316672] systemd[1]: Listening on udev Kernel Socket.
[    5.321941] systemd[1]: Mounting Huge Pages File System...
[    5.327303] systemd[1]: Mounting POSIX Message Queue File System...
[    5.332529] systemd[1]: Mounting RPC Pipe File System...
[    5.338901] systemd[1]: Mounting Kernel Debug File System...
[    5.344847] systemd[1]: Mounting Kernel Trace File System...
[    5.345935] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[    5.351842] systemd[1]: Starting Restore / save the current clock...
[    5.357657] systemd[1]: Starting Set the console keyboard layout...
[    5.363547] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    5.369399] systemd[1]: Starting Load Kernel Module configfs...
[    5.375751] systemd[1]: Starting Load Kernel Module drm...
[    5.385903] systemd[1]: Starting Load Kernel Module fuse...
[    5.392053] systemd[1]: Started Nameserver information manager.
[    5.393350] systemd[1]: Reached target Network (Pre).
[    5.396000] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    5.396343] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    5.404072] systemd[1]: Starting Load Kernel Modules...
[    5.410163] systemd[1]: Starting Remount Root and Kernel File Systems...
[    5.415970] systemd[1]: Starting Coldplug All udev Devices...
[    5.428895] systemd[1]: Mounted Huge Pages File System.
[    5.430509] systemd[1]: Mounted POSIX Message Queue File System.
[    5.432029] systemd[1]: Mounted Kernel Debug File System.
[    5.433442] systemd[1]: Mounted Kernel Trace File System.
[    5.436262] systemd[1]: Finished Restore / save the current clock.
[    5.439423] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    5.442034] systemd[1]: modprobe@configfs.service: Succeeded.
[    5.443953] systemd[1]: Finished Load Kernel Module configfs.
[    5.446199] systemd[1]: modprobe@drm.service: Succeeded.
[    5.447903] systemd[1]: Finished Load Kernel Module drm.
[    5.450419] systemd[1]: modprobe@fuse.service: Succeeded.
[    5.452200] systemd[1]: Finished Load Kernel Module fuse.
[    5.462297] systemd[1]: Mounting FUSE Control File System...
[    5.468581] systemd[1]: Mounting Kernel Configuration File System...
[    5.474770] systemd[1]: Finished Load Kernel Modules.
[    5.481413] systemd[1]: Starting Apply Kernel Variables...
[    5.487530] EXT4-fs (mmcblk1p1): re-mounted. Opts: commit=600,errors=remount-ro. Quota mode: none.
[    5.493318] systemd[1]: Mounted FUSE Control File System.
[    5.494880] systemd[1]: Mounted Kernel Configuration File System.
[    5.497893] systemd[1]: Finished Remount Root and Kernel File Systems.
[    5.500994] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    5.501397] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[    5.508543] systemd[1]: Starting Load/Save Random Seed...
[    5.517392] systemd[1]: Starting Create System Users...
[    5.520318] RPC: Registered named UNIX socket transport module.
[    5.520348] RPC: Registered udp transport module.
[    5.520356] RPC: Registered tcp transport module.
[    5.520364] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    5.533610] systemd[1]: Mounted RPC Pipe File System.
[    5.545167] systemd[1]: Finished Apply Kernel Variables.
[    5.568824] systemd[1]: Finished Create System Users.
[    5.577822] systemd[1]: Starting Create Static Device Nodes in /dev...
[    5.652763] systemd[1]: Finished Create Static Device Nodes in /dev.
[    5.665990] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[    5.730434] systemd[1]: Finished Set the console keyboard layout.
[    5.731613] systemd[1]: Reached target Local File Systems (Pre).
[    5.737212] systemd[1]: Mounting /tmp...
[    5.755954] systemd[1]: Mounted /tmp.
[    5.757182] systemd[1]: Reached target Local File Systems.
[    5.765095] systemd[1]: Starting Armbian leds state...
[    5.773549] systemd[1]: Starting Armbian ZRAM config...
[    5.782259] systemd[1]: Starting Set console font and keymap...
[    5.791461] systemd[1]: Starting Preprocess NFS configuration...
[    5.800095] systemd[1]: Starting Tell Plymouth To Write Out Runtime Data...
[    5.816486] systemd[1]: Finished Set console font and keymap.
[    5.820584] systemd[1]: nfs-config.service: Succeeded.
[    5.834521] systemd[1]: Finished Preprocess NFS configuration.
[    5.835778] systemd[1]: Started Rule-based Manager for Device Events and Files.
[    5.838445] systemd[1]: Finished Tell Plymouth To Write Out Runtime Data.
[    5.842011] systemd[1]: Finished Armbian leds state.
[    5.842966] systemd[1]: Received SIGRTMIN+20 from PID 338 (plymouthd).
[    5.843345] systemd[1]: Condition check resulted in RPC security service for NFS client and server being skipped.
[    5.843438] systemd[1]: Condition check resulted in RPC security service for NFS server being skipped.
[    5.843590] systemd[1]: Reached target NFS client services.
[    6.299702] zram: Added device: zram0
[    6.301192] zram: Added device: zram1
[    6.302301] zram: Added device: zram2
[    6.330397] random: systemd: uninitialized urandom read (16 bytes read)
[    6.330561] random: systemd: uninitialized urandom read (16 bytes read)
[    6.337671] random: systemd: uninitialized urandom read (16 bytes read)
[    6.399376] zram0: detected capacity change from 0 to 3956240
[    6.476508] systemd[1]: Finished Coldplug All udev Devices.
[    6.486820] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
[    6.499599] systemd[1]: Starting Show Plymouth Boot Screen...
[    6.511083] systemd[1]: Finished Helper to synchronize boot up for ifupdown.
[    6.525170] systemd[1]: Starting Raise network interfaces...
[    6.548401] systemd[1]: Found device /dev/ttyS2.
[    6.558285] systemd[1]: Started Show Plymouth Boot Screen.
[    6.561083] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped.
[    6.562462] systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
[    6.563750] systemd[1]: Reached target Local Encrypted Volumes.
[    6.564644] systemd[1]: Reached target Paths.
[    6.608363] mc: Linux media interface: v0.10
[    6.656112] videodev: Linux video capture interface: v2.00
[    6.717842] usbcore: registered new interface driver usbserial_generic
[    6.717877] usbserial: USB Serial support registered for generic
[    6.742576] usbcore: registered new interface driver ch341
[    6.742621] usbserial: USB Serial support registered for ch341-uart
[    6.742715] ch341 4-1:1.0: ch341-uart converter detected
[    6.746592] usbcore: registered new interface driver cp210x
[    6.746643] usbserial: USB Serial support registered for cp210x
[    6.746732] cp210x 3-1:1.0: cp210x converter detected
[    6.755284] ch341-uart ttyUSB0: break control not supported, using simulated break
[    6.755577] usb 4-1: ch341-uart converter now attached to ttyUSB0
[    6.781212] usb 3-1: cp210x converter now attached to ttyUSB1
[    6.900933] Bluetooth: Core ver 2.22
[    6.901061] NET: Registered PF_BLUETOOTH protocol family
[    6.901066] Bluetooth: HCI device and connection manager initialized
[    6.901087] Bluetooth: HCI socket layer initialized
[    6.901096] Bluetooth: L2CAP socket layer initialized
[    6.901114] Bluetooth: SCO socket layer initialized
[    6.906322] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    6.906889] rockchip-iep ff670000.iep: Device rockchip-iep registered as /dev/video0
[    6.908532] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    6.914969] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
[    6.919219] hantro_vpu: module is from the staging directory, the quality is unknown, you have been warned.
[    6.930579] rockchip-rga ff680000.rga: HW Version: 0x03.02
[    6.932412] rockchip_vdec: module is from the staging directory, the quality is unknown, you have been warned.
[    6.933602] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video1
[    6.971391] hantro-vpu ff650000.video-codec: Adding to iommu group 0
[    6.999758] es8316 1-0011: Failed to get IRQ 0: -22
[    7.002323] rkvdec ff660000.video-codec: Adding to iommu group 1
[    7.008754] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-enc as /dev/video2
[    7.019468] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-dec as /dev/video4
[    7.028193] brcmfmac: F1 signature read @0x18000000=0x15264345
[    7.032228] Bluetooth: HCI UART driver ver 2.3
[    7.032259] Bluetooth: HCI UART protocol H4 registered
[    7.032264] Bluetooth: HCI UART protocol BCSP registered
[    7.032376] Bluetooth: HCI UART protocol LL registered
[    7.032382] Bluetooth: HCI UART protocol ATH3K registered
[    7.032445] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    7.032700] Bluetooth: HCI UART protocol Intel registered
[    7.032909] Bluetooth: HCI UART protocol Broadcom registered
[    7.032916] Driver 'hci_uart_qca' needs updating - please use bus_type methods
[    7.032982] Bluetooth: HCI UART protocol QCA registered
[    7.032988] Bluetooth: HCI UART protocol AG6XX registered
[    7.033042] Bluetooth: HCI UART protocol Marvell registered
[    7.033145] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
[    7.039477] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    7.040356] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.radxa,rockpi4b.bin failed with error -2
[    7.044127] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
[    7.045020] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.radxa,rockpi4b.txt failed with error -2
[    7.071971] systemd[1]: Finished Raise network interfaces.
[    7.131155] random: crng init done
[    7.131165] random: 91 urandom warning(s) missed due to ratelimiting
[    7.156742] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    7.159045] systemd[1]: Finished Load/Save Random Seed.
[    7.160202] systemd[1]: Condition check resulted in First Boot Complete being skipped.
[    7.163013] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
[    7.163293] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
[    7.167990] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Aug 25 2015 18:58:57 version 7.45.69 (r581703) FWID 01-24037f6e
[    7.173912] usbcore: registered new interface driver brcmfmac
[    7.175555] dw-apb-uart ff180000.serial: failed to request DMA
[    7.194241] Adding 1978116k swap on /dev/zram0.  Priority:5 extents:1 across:1978116k SSFS
[    7.284006] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
[    7.287618] systemd[1]: Starting Load/Save RF Kill Switch Status...
[    7.344764] systemd[1]: Reached target Bluetooth.
[    7.392522] systemd[1]: Started Load/Save RF Kill Switch Status.
[    7.434350] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped.
[    7.434895] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    7.435021] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
[    7.435459] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    7.435629] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
[    7.435732] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[    7.442735] zram1: detected capacity change from 0 to 102400
[    7.487720] systemd[1]: Finished Armbian ZRAM config.
[    7.493111] systemd[1]: Starting Armbian memory supported logging...
[    7.563613] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard. Quota mode: none.
[    7.563670] ext4 filesystem being mounted at /var/log supports timestamps until 2038 (0x7fffffff)
[    9.351159] Bluetooth: hci0: command 0x0c03 tx timeout
[    9.973128] systemd[1]: Finished Armbian memory supported logging.
[    9.986703] systemd[1]: Starting Journal Service...
[   10.148139] systemd[1]: Started Journal Service.
[   10.190362] systemd-journald[688]: Received client request to flush runtime journal.
[   10.752315] systemd-journald[688]: Received client request to relinquish /var/log/journal/9d49e2e9131344b3b45c7de016c3cf2c access.
[   11.694671] rk_gmac-dwmac fe300000.ethernet eth0: PHY [stmmac-0:00] driver [Generic PHY] (irq=POLL)
[   11.699955] rk_gmac-dwmac fe300000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[   11.711228] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found
[   11.711268] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW
[   11.719051] rk_gmac-dwmac fe300000.ethernet eth0: configuring for phy/rgmii link mode
[   15.816027] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[   15.816100] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   17.383068] Bluetooth: hci0: BCM: Reset failed (-110)
rockpi-4c:~:#

der Fehler behaftete Teil

[    3.007246]     /init
[    3.007253]   with environment:
[    3.007260]     HOME=/
[    3.007266]     TERM=linux
[    3.007272]     splash=verbose
[    3.007279]     ubootpart=75ea9151-01
[    3.007285]     cgroup_enable=memory
[    3.007291]     cgroup_memory=1
[    3.726436] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
[    3.726458] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
[    3.726613] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
[    3.726876] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[    3.726890] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[    3.726903] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).
[    3.726919] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[    3.726998] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed






[    4.894990] systemd[373]: /usr/lib/systemd/system-generators/netplan failed with exit status 1.
[    5.106282] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.

[crunchip]

@newcomer82 das was ich so auf die schnelle jetzt sehe, wäre

sagte in IOBroker hängt sich immer zu ähnlichen Zeiten auf:

4.894990] systemd[373]: /usr/lib/systemd/system-generators/netplan failed with exit status 1.
[ 5.106282] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.

@newcomer82 sagte in IOBroker hängt sich immer zu ähnlichen Zeiten auf:

brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.radxa,rockpi4b.bin failed with error -2
[ 7.044127] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
[ 7.045020] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.radxa,rockpi4b.txt failed with error -2

allerdings bin ich da auch nur Laie

[Newcomer82]

@crunchip said in IOBroker hängt sich immer zu ähnlichen Zeiten auf:

@newcomer82 das was ich so auf die schnelle jetzt sehe, wäre

sagte in IOBroker hängt sich immer zu ähnlichen Zeiten auf:

4.894990] systemd[373]: /usr/lib/systemd/system-generators/netplan failed with exit status 1.
[ 5.106282] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.

Habe jetzt mal von KillMode=none auf KillMode=mixed gestellt. Die Dokumentation dahinter klingt jedenfalls so, als könnte es bei meinem Fehler aus dem Log

10:17:16.897 - error: admin.0 (1480) admin.0 already running

helfen

Danke für die Hilfe.
Würde den Rockpi 4 gerne weiter mit dem IObroker laufen lassen, gegenüber dem RPi 3 ist das eine Rakete.

[crunchip]

@newcomer82 sagte in IOBroker hängt sich immer zu ähnlichen Zeiten auf:

already running

Bedeutet ja nur das der Prozess nicht ordentlich beendet wurde/noch läuft nach einem Neustart deines Js-Controllers

[Newcomer82]

Kurzes Update, hatte den Rock Pi gegen einen Baugleichen getausch und siehe da, der läuft jetzt seit 2 Wochen ohne Absturz durch. Habe nochmal gegen geprüft mit dem 1. Board, das steigt nach spätestens 12h aus.
Das lässt mich jetzt irgendwie ratlos zurück. Schade, ansonsten wäre der Rockpi 4 wirklich eine super Alternative zum RP4.

[Thomas Braun]

@newcomer82

Ja, ein Hardwaredefekt kann natürlich auch immer möglich sein.