Problem beim Update von Adaptern/Modulen/Controller

Thomas Braun

@werner2000x

Bitte jeweils vollständig posten, Eingabezeile inklusive.

werner2000x

Nach Befehl iob diag erhalte ich folgende Ausgabe:

======== Start marking the full check here =========

Skript v.2023-01-02

*** BASE SYSTEM ***
Model           : Raspberry Pi 4 Model B Rev 1.4
Architecture:   armv7l
Docker:         false
Virtualization: none
Distributor ID: Raspbian
Description:    Raspbian GNU/Linux 10 (buster)
Release:        10
Codename:       buster

PRETTY_NAME="Raspbian GNU/Linux 10 (buster)"
NAME="Raspbian GNU/Linux"
VERSION_ID="10"
VERSION="10 (buster)"
VERSION_CODENAME=buster
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"

Systemuptime and Load:
 18:20:02 up 14 min,  2 users,  load average: 0.85, 0.82, 0.81
CPU threads: 4

*** Time and Time Zones ***
Thu Feb 23 17:20:02 UTC 2023
Thu Feb 23 18:20:02 CET 2023
CET +0100
Europe/Berlin

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input netdev bluetooth lpadmin gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    graphical.target

*** MEMORY ***
              total        used        free      shared  buff/cache   available
Mem:           7.9G        2.0G        5.1G        9.0M        839M        6.2G
Swap:           99M          0B         99M
Total:         8.0G        2.0G        5.2G

         7898 M total memory
         1996 M used memory
          314 M active memory
         2398 M inactive memory
         5062 M free memory
          128 M buffer memory
          710 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4      117G   21G   92G  19% /
devtmpfs       devtmpfs  3.7G     0  3.7G   0% /dev
tmpfs          tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs          tmpfs     3.9G  9.5M  3.9G   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     3.9G     0  3.9G   0% /sys/fs/cgroup
/dev/mmcblk0p1 vfat      253M   49M  204M  20% /boot
tmpfs          tmpfs     790M     0  790M   0% /run/user/1000

Messages in dmesg:
[Thu Feb 23 18:05:12 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=DC:A6:32:C4:F8:86 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=a7cf6190-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[Thu Feb 23 18:05:13 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Thu Feb 23 18:05:13 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Thu Feb 23 18:05:15 2023] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)

Show mounted filesystems (real ones only):
TARGET        SOURCE         FSTYPE OPTIONS
/             /dev/mmcblk0p2 ext4   rw,noatime
|-/sys/fs/bpf none           bpf    rw,nosuid,nodev,noexec,relatime,mode=700
`-/boot       /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
4.3G    /var/
2.9G    /var/cache/apt
2.9G    /var/cache
2.8G    /var/cache/apt/archives
719M    /var/log

/opt/iobroker/backups:
1.8G    /opt/iobroker/backups/
296K    /opt/iobroker/backups/scripte
268K    /opt/iobroker/backups/scripte/Meine_Geräte
252K    /opt/iobroker/backups/Meine_Geräte
8.0K    /opt/iobroker/backups/scripte/common

/opt/iobroker/iobroker-data:
1.6G    /opt/iobroker/iobroker-data/
761M    /opt/iobroker/iobroker-data/node-red/node_modules
761M    /opt/iobroker/iobroker-data/node-red
601M    /opt/iobroker/iobroker-data/files
531M    /opt/iobroker/iobroker-data/node-red/node_modules/@tensorflow

The five largest files in iobroker-data are:
197M    /opt/iobroker/iobroker-data/node-red/node_modules/@tensorflow/tfjs-node/deps/lib/libtensorflow.so.2.5.0
41M     /opt/iobroker/iobroker-data/files/material/static/js/main.c5478f66.js.map
33M     /opt/iobroker/iobroker-data/node-red/node_modules/@tensorflow/tfjs-node/deps/lib/libtensorflow_framework.so.2.5.0
33M     /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.10538062.js.map
23M     /opt/iobroker/iobroker-data/objects.jsonl

*** NodeJS-Installation ***

/usr/bin/nodejs         v14.21.3
/usr/bin/node           v14.21.3
/usr/bin/npm            9.5.0
/usr/bin/npx            9.5.0

nodejs:
  Installed: 14.21.3-deb-1nodesource1
  Candidate: 14.21.3-deb-1nodesource1
  Version table:
 *** 14.21.3-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_14.x buster/main armhf Packages
        100 /var/lib/dpkg/status
     10.24.0~dfsg-1~deb10u2 500
        500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages

Temp directories causing npm8 problem: 1

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  4.0.24
admin:          6.3.6
javascript:     "javascript" not found

npm ERR! code ELSPROBLEMS
npm ERR! extraneous: @types/caseless@0.12.2 /opt/iobroker/node_modules/@types/caseless
npm ERR! extraneous: @types/request@2.48.8 /opt/iobroker/node_modules/@types/request
npm ERR! extraneous: @types/tough-cookie@4.0.2 /opt/iobroker/node_modules/@types/tough-cookie
npm ERR! extraneous: coffeescript@1.12.7 /opt/iobroker/node_modules/coffeescript
npm ERR! invalid: iobroker.javascript@ /opt/iobroker/node_modules/iobroker.javascript
npm ERR! extraneous: node-inspect@2.0.0 /opt/iobroker/node_modules/node-inspect
npm ERR! extraneous: picocolors@1.0.0 /opt/iobroker/node_modules/picocolors
npm ERR! extraneous: setimmediate@1.0.5 /opt/iobroker/node_modules/setimmediate
npm ERR! extraneous: typescript@4.7.4 /opt/iobroker/node_modules/typescript
npm ERR! extraneous: virtual-tsc@0.6.2 /opt/iobroker/node_modules/virtual-tsc
npm ERR! extraneous: wake_on_lan@1.0.0 /opt/iobroker/node_modules/wake_on_lan

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/pi/.npm/_logs/2023-02-23T17_20_26_124Z-debug-0.log
Adapters from github:   1

Adapter State
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 192.168.198.39, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : raspberrypi                              -  enabled
  system.adapter.alias-manager.0          : alias-manager         : raspberrypi                              -  enabled
  system.adapter.backitup.0               : backitup              : raspberrypi                              - disabled
+ system.adapter.ble.0                    : ble                   : raspberrypi                              -  enabled
  system.adapter.chromecast.0             : chromecast            : raspberrypi                              - disabled
+ system.adapter.cloud.0                  : cloud                 : raspberrypi                              -  enabled
+ system.adapter.daikin-cloud.0           : daikin-cloud          : raspberrypi                              -  enabled
  system.adapter.daswetter.0              : daswetter             : raspberrypi                              -  enabled
+ system.adapter.device-reminder.1        : device-reminder       : raspberrypi                              -  enabled
+ system.adapter.discovery.0              : discovery             : raspberrypi                              -  enabled
+ system.adapter.echarts.0                : echarts               : raspberrypi                              -  enabled
+ system.adapter.energiefluss.0           : energiefluss          : raspberrypi                              -  enabled
  system.adapter.flot.0                   : flot                  : raspberrypi                              - disabled
+ system.adapter.fritzbox.0               : fritzbox              : raspberrypi                              -  enabled
+ system.adapter.fritzdect.0              : fritzdect             : raspberrypi                              -  enabled
+ system.adapter.history.0                : history               : raspberrypi                              -  enabled
+ system.adapter.homeconnect.0            : homeconnect           : raspberrypi                              -  enabled
+ system.adapter.hue-extended.0           : hue-extended          : raspberrypi                              -  enabled
+ system.adapter.hue.0                    : hue                   : raspberrypi                              -  enabled, port: 443
  system.adapter.ical.0                   : ical                  : raspberrypi                              -  enabled
  system.adapter.icons-fatcow-hosting.0   : icons-fatcow-hosting  : raspberrypi                              -  enabled
  system.adapter.icons-icons8.0           : icons-icons8          : raspberrypi                              - disabled
  system.adapter.icons-material-png.0     : icons-material-png    : raspberrypi                              - disabled
  system.adapter.icons-mfd-svg.0          : icons-mfd-svg         : raspberrypi                              - disabled
+ system.adapter.influxdb.0               : influxdb              : raspberrypi                              -  enabled, port: 8086
+ system.adapter.info.0                   : info                  : raspberrypi                              -  enabled
+ system.adapter.innogy-smarthome.0       : innogy-smarthome      : raspberrypi                              -  enabled
+ system.adapter.iqontrol.0               : iqontrol              : raspberrypi                              -  enabled
+ system.adapter.jarvis.0                 : jarvis                : raspberrypi                              -  enabled
  system.adapter.javascript.0             : javascript            : raspberrypi                              -  enabled
  system.adapter.km200.0                  : km200                 : raspberrypi                              - disabled
  system.adapter.material.0               : material              : raspberrypi                              - disabled
+ system.adapter.meross.0                 : meross                : raspberrypi                              -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : raspberrypi                              -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.node-red.0               : node-red              : raspberrypi                              -  enabled, port: 1880, bind: 192.168.198.39
+ system.adapter.parser.0                 : parser                : raspberrypi                              -  enabled
+ system.adapter.pushover.0               : pushover              : raspberrypi                              -  enabled
  system.adapter.rainbird.0               : rainbird              : raspberrypi                              - disabled
+ system.adapter.rpi2.0                   : rpi2                  : raspberrypi                              -  enabled
+ system.adapter.simple-api.0             : simple-api            : raspberrypi                              -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.sourceanalytix.0         : sourceanalytix        : raspberrypi                              -  enabled
  system.adapter.sprinklecontrol.0        : sprinklecontrol       : raspberrypi                              - disabled
  system.adapter.systeminfo.0             : systeminfo            : raspberrypi                              - disabled
+ system.adapter.text2command.0           : text2command          : raspberrypi                              -  enabled
+ system.adapter.tr-064.0                 : tr-064                : raspberrypi                              -  enabled
+ system.adapter.trashschedule.0          : trashschedule         : raspberrypi                              -  enabled
  system.adapter.tuya.0                   : tuya                  : raspberrypi                              - disabled
+ system.adapter.tuya.1                   : tuya                  : raspberrypi                              -  enabled
  system.adapter.vis-bars.0               : vis-bars              : raspberrypi                              - disabled
  system.adapter.vis-canvas-gauges.0      : vis-canvas-gauges     : raspberrypi                              - disabled
  system.adapter.vis-colorpicker.0        : vis-colorpicker       : raspberrypi                              - disabled
  system.adapter.vis-fancyswitch.0        : vis-fancyswitch       : raspberrypi                              - disabled
  system.adapter.vis-history.0            : vis-history           : raspberrypi                              - disabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : raspberrypi                              - disabled
  system.adapter.vis-icontwo.0            : vis-icontwo           : raspberrypi                              - disabled
+ system.adapter.vis-inventwo.0           : vis-inventwo          : raspberrypi                              -  enabled
  system.adapter.vis-jqui-mfd.0           : vis-jqui-mfd          : raspberrypi                              - disabled
  system.adapter.vis-justgage.0           : vis-justgage          : raspberrypi                              - disabled
  system.adapter.vis-map.0                : vis-map               : raspberrypi                              - disabled
  system.adapter.vis-material-advanced.0  : vis-material-advanced : raspberrypi                              - disabled
  system.adapter.vis-materialdesign.0     : vis-materialdesign    : raspberrypi                              - disabled
  system.adapter.vis-metro.0              : vis-metro             : raspberrypi                              - disabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : raspberrypi                              - disabled
  system.adapter.vis.0                    : vis                   : raspberrypi                              -  enabled
  system.adapter.vw-connect.0             : vw-connect            : raspberrypi                              - disabled
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspberrypi
+ system.adapter.hue.0                    : hue                   : raspberrypi
+ system.adapter.influxdb.0               : influxdb              : raspberrypi
+ system.adapter.mqtt.0                   : mqtt                  : raspberrypi
+ system.adapter.node-red.0               : node-red              : raspberrypi
+ system.adapter.simple-api.0             : simple-api            : raspberrypi
+ system.adapter.web.0                    : web                   : raspberrypi

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): beta

Installed ioBroker-Instances
Used repository: beta
Adapter    "admin"        : 6.3.6    , installed 6.3.6
Adapter    "alexa2"       : 3.23.2   , installed 3.23.2
Adapter    "alias-manager": 1.2.6    , installed 1.2.6
Adapter    "backitup"     : 2.6.2    , installed 2.6.1  [Updatable]
Adapter    "ble"          : 0.13.3   , installed 0.13.3
Adapter    "chromecast"   : 3.0.3    , installed 3.0.3
Adapter    "cloud"        : 4.3.1    , installed 4.3.1
Adapter    "daikin"       : 1.4.2    , installed 1.4.2
Adapter    "daikin-cloud" : 0.2.3    , installed 0.2.3
Adapter    "daswetter"    : 3.1.7    , installed 3.1.7
Adapter    "device-reminder": 1.2.9  , installed 1.2.9
Adapter    "devices"      : 1.1.2    , installed 1.1.2
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "echarts"      : 1.4.9    , installed 1.4.7  [Updatable]
Adapter    "ems-esp"      : 1.22.0   , installed 1.22.0
Adapter    "energymanager": 1.4.1    , installed 1.4.1
Adapter    "flot"         : 1.12.0   , installed 1.12.0
Adapter    "fritzbox"     : 0.5.0    , installed 0.5.0
Adapter    "fritzdect"    : 2.3.1    , installed 2.3.1
Adapter    "history"      : 2.2.4    , installed 2.2.4
Adapter    "homeconnect"  : 1.1.1    , installed 1.1.1
Adapter    "hue"          : 3.7.1    , installed 3.7.1
Adapter    "hue-extended" : 2.0.0    , installed 2.0.0
Adapter    "ical"         : 1.13.2   , installed 1.13.2
Adapter    "icons-fatcow-hosting": 0.1.0, installed 0.1.0
Adapter    "icons-icons8" : 0.0.1    , installed 0.0.1
Adapter    "icons-material-png": 0.1.0, installed 0.1.0
Adapter    "icons-mfd-svg": 1.1.0    , installed 1.1.0
Adapter    "influxdb"     : 3.2.0    , installed 3.2.0
Adapter    "info"         : 1.9.26   , installed 1.9.26
Adapter    "innogy-smarthome": 1.2.6 , installed 1.2.6
Adapter    "iot"          : 1.14.3   , installed 1.14.3
Adapter    "iqontrol"     : 2.1.0    , installed 2.1.0
Adapter    "jarvis"       : 3.1.2    , installed 3.1.2
Controller "js-controller": 4.0.24   , installed 4.0.24
Adapter    "km200"        : 2.0.3    , installed 2.0.3
Adapter    "material"     : 1.3.1    , installed 1.3.1
Adapter    "meross"       : 1.15.0   , installed 1.15.0
Adapter    "mqtt"         : 4.0.7    , installed 4.0.7
Adapter    "node-red"     : 4.0.0    , installed 4.0.0
Adapter    "parser"       : 1.3.2    , installed 1.3.2
Adapter    "ping"         : 1.5.3    , installed 1.5.3
Adapter    "pushover"     : 3.0.3    , installed 3.0.3
Adapter    "rainbird"     : 0.2.2    , installed 0.2.2
Adapter    "rpi2"         : 1.3.2    , installed 1.3.2
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 6.3.3    , installed 6.3.3
Adapter    "sourceanalytix": 0.4.14  , installed 0.4.14
Adapter    "sprinklecontrol": 0.2.13 , installed 0.2.13
Adapter    "systeminfo"   : 0.3.1    , installed 0.3.1
Adapter    "text2command" : 3.0.1    , installed 3.0.0  [Updatable]
Adapter    "tr-064"       : 4.2.18   , installed 4.2.18
Adapter    "trashschedule": 2.2.0    , installed 2.2.0
Adapter    "tuya"         : 3.14.1   , installed 3.14.1
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "vis-bars"     : 0.1.4    , installed 0.1.4
Adapter    "vis-canvas-gauges": 1.0.1, installed 1.0.1
Adapter    "vis-colorpicker": 1.2.0  , installed 1.2.0
Adapter    "vis-fancyswitch": 1.1.0  , installed 1.1.0
Adapter    "vis-history"  : 1.0.0    , installed 1.0.0
Adapter    "vis-hqwidgets": 1.3.1    , installed 1.3.1
Adapter    "vis-icontwo"  : 0.90.0   , installed 0.90.0
Adapter    "vis-inventwo" : 3.3.3    , installed 3.3.3
Adapter    "vis-jqui-mfd" : 1.0.12   , installed 1.0.12
Adapter    "vis-justgage" : 1.0.2    , installed 1.0.2
Adapter    "vis-map"      : 1.0.4    , installed 1.0.4
Adapter    "vis-material-advanced": 1.7.2, installed 1.7.2
Adapter    "vis-material-webfont": 0.0.3, installed 0.0.3
Adapter    "vis-materialdesign": 0.5.9, installed 0.5.9
Adapter    "vis-metro"    : 1.2.0    , installed 1.2.0
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "vw-connect"   : 0.0.60   , installed 0.0.60
Adapter    "web"          : 5.5.0    , installed 5.5.0
Adapter    "ws"           : 2.3.5    , installed 2.3.5

Objects and States
Please stand by - This may take a while
Objects:        21475
States:         18373

*** OS-Repositories and Updates ***
Hit:1 http://archive.raspberrypi.org/debian buster InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian buster InRelease
Hit:3 https://apt.grafana.com stable InRelease
Hit:4 https://repos.influxdata.com/debian stable InRelease
Hit:5 https://deb.nodesource.com/node_14.x buster InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State
tcp        0      0 0.0.0.0:8400            0.0.0.0:*               LISTEN
tcp        0      0 192.168.198.39:8081     0.0.0.0:*               LISTEN
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN
tcp        0      0 127.0.0.1:631           0.0.0.0:*               LISTEN
tcp        0      0 192.168.198.39:1880     0.0.0.0:*               LISTEN
tcp        0      0 127.0.0.1:8088          0.0.0.0:*               LISTEN
tcp        0      0 0.0.0.0:445             0.0.0.0:*               LISTEN
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN
tcp        0      0 0.0.0.0:139             0.0.0.0:*               LISTEN
tcp        0      0 0.0.0.0:5900            0.0.0.0:*               LISTEN
tcp6       0      0 :::8082                 :::*                    LISTEN
tcp6       0      0 :::8086                 :::*                    LISTEN
tcp6       0      0 ::1:3350                :::*                    LISTEN
tcp6       0      0 :::22                   :::*                    LISTEN
tcp6       0      0 :::8087                 :::*                    LISTEN
tcp6       0      0 ::1:631                 :::*                    LISTEN
tcp6       0      0 :::3000                 :::*                    LISTEN
tcp6       0      0 :::3389                 :::*                    LISTEN
tcp6       0      0 :::445                  :::*                    LISTEN
tcp6       0      0 :::139                  :::*                    LISTEN
tcp6       0      0 :::5900                 :::*                    LISTEN
udp        0      0 0.0.0.0:6666            0.0.0.0:*
udp        0      0 0.0.0.0:6667            0.0.0.0:*
udp        0      0 0.0.0.0:68              0.0.0.0:*
udp        0      0 0.0.0.0:631             0.0.0.0:*
udp        0      0 192.168.198.255:137     0.0.0.0:*
udp        0      0 192.168.198.39:137      0.0.0.0:*
udp        0      0 192.168.198.255:137     0.0.0.0:*
udp        0      0 192.168.198.42:137      0.0.0.0:*
udp        0      0 0.0.0.0:137             0.0.0.0:*
udp        0      0 192.168.198.255:138     0.0.0.0:*
udp        0      0 192.168.198.39:138      0.0.0.0:*
udp        0      0 192.168.198.255:138     0.0.0.0:*
udp        0      0 192.168.198.42:138      0.0.0.0:*
udp        0      0 0.0.0.0:138             0.0.0.0:*
udp        0      0 0.0.0.0:58511           0.0.0.0:*
udp        0      0 0.0.0.0:38566           0.0.0.0:*
udp        0      0 192.168.198.39:1194     0.0.0.0:*
udp        0      0 0.0.0.0:5353            0.0.0.0:*
udp6       0      0 :::41388                :::*
udp6       0      0 :::546                  :::*
udp6       0      0 :::5353                 :::*

*** Log File - Last 25 Lines ***

2023-02-23 18:19:09.154  - debug: daikin-cloud.0 (1579) state daikin-cloud.0.f7b
2023-02-23 18:19:59.080  - info: influxdb.0 (1263) No Data
2023-02-23 18:19:59.173  - info: influxdb.0 (1263) No Data
2023-02-23 18:19:59.478  - info: influxdb.0 (1263) No Data
2023-02-23 18:20:00.146  - info: tuya.1 (1598) bff726197434978f13tvtd: Received
2023-02-23 18:20:00.610  - info: tuya.1 (1598) bff726197434978f13tvtd: Received
2023-02-23 18:20:08.693  - debug: daikin-cloud.0 (1579) state daikin-cloud.0.09d
2023-02-23 18:20:09.351  - debug: daikin-cloud.0 (1579) state daikin-cloud.0.f7b
2023-02-23 18:20:24.470  - info: meross.0 (1531) Can not get Data for Device 211
2023-02-23 18:20:24.471  - warn: meross.0 (1531) Can not get Data for Device 211
2023-02-23 18:20:59.142  - info: influxdb.0 (1263) No Data
2023-02-23 18:20:59.565  - info: influxdb.0 (1263) No Data
2023-02-23 18:21:08.868  - debug: daikin-cloud.0 (1579) update state: 09d81369-d
2023-02-23 18:21:08.868  - debug: daikin-cloud.0 (1579) update state: 09d81369-d
2023-02-23 18:21:08.881  - debug: daikin-cloud.0 (1579) state daikin-cloud.0.09d
2023-02-23 18:21:08.889  - debug: daikin-cloud.0 (1579) state daikin-cloud.0.09d
2023-02-23 18:21:08.895  - debug: daikin-cloud.0 (1579) state daikin-cloud.0.09d
2023-02-23 18:21:09.659  - debug: daikin-cloud.0 (1579) update state: f7b00bf0-d
2023-02-23 18:21:09.660  - debug: daikin-cloud.0 (1579) update state: f7b00bf0-d
2023-02-23 18:21:09.667  - warn: daikin-cloud.0 (1579) State "daikin-cloud.0.f7b
2023-02-23 18:21:09.675  - debug: daikin-cloud.0 (1579) state daikin-cloud.0.f7b
2023-02-23 18:21:09.679  - debug: daikin-cloud.0 (1579) state daikin-cloud.0.f7b
2023-02-23 18:21:09.688  - debug: daikin-cloud.0 (1579) state daikin-cloud.0.f7b
2023-02-23 18:21:11.789  - info: tuya.1 (1598) bff726197434978f13tvtd: Received
2023-02-23 18:21:12.173  - info: tuya.1 (1598) bff726197434978f13tvtd: Received

============ Mark until here for C&P =============

iob diag has finished.

Thomas Braun

@werner2000x

Temp directories causing npm8 problem: 1

Die Lösung dazu findet sich in den oben festgepinnten Threads.
https://forum.iobroker.net/topic/57337/fehler-25-oder-217-bei-adapter-install-update-mit-npm8
Und npm wird nicht von Hand aktualisiert!

Dein Betriebssystem ist abgekündigt, installiert da das aktuelle stabile Release 'Bullseye'.

ostseereiter

Ich habe das schon seit ein viertel Jahr das sich kein Adapter mehr aktualisieren kann. Es ist aber erst seid Node JS 16 wenn man auf die 14 zurückgehrt dann klappt das wieder habe ich gelesen. Nu sind es bei mir schon fast 40 Adapter die aktualiersiert werden möchten. Ich lass es jetzt einfach so System läuft trotzdem super.Wenn es meine Zeit zuläßt werde ich dann Iobroker neu installieren. Solange es läuft ist es gut und das andere ist alles flickschusterei denke ich, denn der festgepinnte Thred haut auch nicht hin weil bei mir nur der Fehler 0 kommt.

Thomas Braun

@ostseereiter sagte in Problem beim Update von Adaptern/Modulen/Controller:

denn der festgepinnte Thred haut auch nicht hin weil bei mir nur der Fehler 0 kommt.

Das nur die Meldung 0 kommt glaube ich nicht.
Aber deine Beschreibung ist auch etwas dünn.
Wenigstens mal ein

iob diag

oder wenigstens

iob update 
iob upgrade ADAPTER --debug

wäre fein. So kann man nichts weiter dazu sagen.

werner2000x

Ich habe jetzt das Problem, dass der Javascript adapter nicht mehr startet (rot).
Wenn ich den Befehl "iob upgrade ADAPTER --debug" aufrufen, dann kommt: Adapter "ADAPTER" is not installed.

Ich habe auch schon javascript neu installiert und gebootet - leider keine Abhilfe.
Gibt es eine Lösung oder nur mit "Bullseye"?

Thomas Braun

@werner2000x

Du hast aber schon gesehen, dass 'ADAPTER' nur ein Platzhalter ist und durch den Adapternamen ersetzt werden muss?

iobroker upgrade javascript --debug

werner2000x

@thomas-braun Ja, Danke das katte ich übersehen.

Nun habe ich den Adapter javascript deinstalliert und er erscheint auch nicht mehr in der Instance Liste.
Wenn ich nun den folgenden Befehl aurufe:

iob upgrade javascript --debug
Adapter "javascript"     is not installed.

erhalt ich die Meldung wie vorstehend. Wie kann ich denn den Adapter neu installieren?

Thomas Braun

@werner2000x

iobroker add javascript --debug

werner2000x

Dann kommt folgendes:

iobroker add javascript --debug
NPM version: 9.5.0
Installing iobroker.javascript@7.0.1... (System call)
npm ERR! code ENOTEMPTY
npm ERR! syscall rename
npm ERR! path /opt/iobroker/node_modules/iobroker.javascript
npm ERR! dest /opt/iobroker/node_modules/.iobroker.javascript-5NZ432mn
npm ERR! errno -39
npm ERR! ENOTEMPTY: directory not empty, rename '/opt/iobroker/node_modules/iobroker.javascript' -> '/opt/iobroker/node_modules/.iobroker.javascript-5NZ432mn'

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2023-02-24T14_10_51_991Z-debug-0.log
host.raspberrypi Cannot install iobroker.javascript@7.0.1: 217

Homoran

@werner2000x sagte in Problem beim Update von Adaptern/Modulen/Controller:

Nun habe ich den Adapter javascript deinstalliert

warum?

dann geht natürlich kein upgrade mehr

Homoran

@werner2000x sagte in Problem beim Update von Adaptern/Modulen/Controller:

217

https://forum.iobroker.net/topic/57337/fehler-25-oder-217-bei-adapter-install-update-mit-npm8

werner2000x

@homoran Ich habe ihn deinstalliert weil er immer Rot in den instancen war.

Thomas Braun

@werner2000x sagte in Problem beim Update von Adaptern/Modulen/Controller:

NPM version: 9.5.0

Von Hand dran herumgefummelt.
NICHT machen.
nodejs (inkl. npm) neuinstallieren.

Beta-Software:
javascript@7.0.1

Ich denke im Beta-Repository bist du vollkommen falsch aufgehoben.

Homoran

@werner2000x sagte in Problem beim Update von Adaptern/Modulen/Controller:

@homoran Ich habe ihn deinstalliert weil er immer Rot in den instancen war.

warum fummelt man an der Installation rum während andere versuchen zu helfen?
Der Wissensstand der helfenden ist damit ständig veraltet.

https://forum.iobroker.net/post/884324

werner2000x

@homoran Ja, ich war etwas voreilig. Kann man denn trotzdem noch was retten obwohl kein javascript adapter mehr da ist?

Thomas Braun

@werner2000x

Frische Ausgabe von

iob diag

bereitstellen, dann nix mehr fummeln.

werner2000x

@thomas-braun Leider ist das Problem damit nicht gelöst. Es fehlt immer noch der javascipt Adapter s. Logfile.
log.txt

[H[2J[3J
[34;107m*** ioBroker Diagnosis ***[0m

Please stretch the window of your terminal programm (puTTY) as wide as possible or switch to full screen

The following checks may give hints to potential malconfigurations or errors, please post them in our forum:

https://forum.iobroker.net

Just copy and paste the Summary Page, including the ``` characters at start and end.
It helps us to help you!

Press any key to continue
[H[2J[3J
[33m======== Start marking the full check here =========[0m

Skript v.2023-01-02

[34;107m*** BASE SYSTEM ***[0m
Model		: Raspberry Pi 4 Model B Rev 1.4
Architecture: 	armv7l
Docker: 	false
Virtualization: none
Distributor ID:	Raspbian
Description:	Raspbian GNU/Linux 10 (buster)
Release:	10
Codename:	buster

PRETTY_NAME="Raspbian GNU/Linux 10 (buster)"
NAME="Raspbian GNU/Linux"
VERSION_ID="10"
VERSION="10 (buster)"
VERSION_CODENAME=buster
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"

Systemuptime and Load:
 16:15:22 up  1:46,  3 users,  load average: 2.10, 1.83, 1.65
CPU threads: 4

[34;107m*** Time and Time Zones ***[0m
Fri Feb 24 15:15:22 UTC 2023
Fri Feb 24 16:15:22 CET 2023
CET +0100
Europe/Berlin

[34;107m*** User and Groups ***[0m
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input netdev bluetooth lpadmin gpio i2c spi iobroker

[34;107m*** X-Server-Setup ***[0m
X-Server: 	false
Desktop: 	
Terminal: 	tty
Boot Target: 	graphical.target

[34;107m*** MEMORY ***[0m
              total        used        free      shared  buff/cache   available
Mem:           7.9G        1.5G        4.6G         17M        1.8G        6.5G
Swap:           99M          0B         99M
Total:         8.0G        1.5G        4.7G

         7898 M total memory
         1494 M used memory
          535 M active memory
         2581 M inactive memory
         4559 M free memory
          193 M buffer memory
         1651 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

[34;107m*** FILESYSTEM ***[0m
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4      117G   21G   92G  18% /
devtmpfs       devtmpfs  3.7G     0  3.7G   0% /dev
tmpfs          tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs          tmpfs     3.9G   18M  3.9G   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     3.9G     0  3.9G   0% /sys/fs/cgroup
/dev/mmcblk0p1 vfat      253M   49M  204M  20% /boot
tmpfs          tmpfs     790M     0  790M   0% /run/user/1000

[32mMessages in dmesg:[0m
[Fri Feb 24 14:29:05 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=DC:A6:32:C4:F8:86 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=a7cf6190-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[Fri Feb 24 14:29:06 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Fri Feb 24 14:29:06 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Fri Feb 24 14:29:08 2023] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)

[32mShow mounted filesystems (real ones only):[0m
TARGET        SOURCE         FSTYPE OPTIONS
/             /dev/mmcblk0p2 ext4   rw,noatime
|-/sys/fs/bpf none           bpf    rw,nosuid,nodev,noexec,relatime,mode=700
`-/boot       /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

[32mFiles in neuralgic directories:[0m

[32m/var:[0m
4.3G	/var/
2.9G	/var/cache/apt
2.9G	/var/cache
2.8G	/var/cache/apt/archives
729M	/var/log

[32m/opt/iobroker/backups:[0m
1.8G	/opt/iobroker/backups/
296K	/opt/iobroker/backups/scripte
268K	/opt/iobroker/backups/scripte/Meine_GerÃ¤te
252K	/opt/iobroker/backups/Meine_GerÃ¤te
8.0K	/opt/iobroker/backups/scripte/common

[32m/opt/iobroker/iobroker-data:[0m
1.6G	/opt/iobroker/iobroker-data/
761M	/opt/iobroker/iobroker-data/node-red/node_modules
761M	/opt/iobroker/iobroker-data/node-red
557M	/opt/iobroker/iobroker-data/files
531M	/opt/iobroker/iobroker-data/node-red/node_modules/@tensorflow

[32mThe five largest files in iobroker-data are:[0m
197M	/opt/iobroker/iobroker-data/node-red/node_modules/@tensorflow/tfjs-node/deps/lib/libtensorflow.so.2.5.0
34M	/opt/iobroker/iobroker-data/objects.jsonl
33M	/opt/iobroker/iobroker-data/node-red/node_modules/@tensorflow/tfjs-node/deps/lib/libtensorflow_framework.so.2.5.0
33M	/opt/iobroker/iobroker-data/files/devices.admin/static/js/main.10538062.js.map
23M	/opt/iobroker/iobroker-data/files/echarts/static/js/main.f59a8c63.js.map

[34;107m*** NodeJS-Installation ***[0m

/usr/bin/nodejs 	v14.21.3
/usr/bin/node 		v14.21.3
/usr/bin/npm 		9.5.1
/usr/bin/npx 		9.5.1

nodejs:
  Installed: 14.21.3-deb-1nodesource1
  Candidate: 14.21.3-deb-1nodesource1
  Version table:
 *** 14.21.3-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_14.x buster/main armhf Packages
        100 /var/lib/dpkg/status
     10.24.0~dfsg-1~deb10u2 500
        500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages

[32mTemp directories causing npm8 problem:[0m 1

[34;107m*** ioBroker-Installation ***[0m

[32mioBroker Status[0m
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

[32mCore adapters versions[0m
js-controller: 	4.0.24
admin: 		6.3.5
javascript: 	"javascript" not found

Adapters from github: 	0

[32mAdapter State[0m
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 192.168.198.39, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : raspberrypi                              -  enabled
  system.adapter.alias-manager.0          : alias-manager         : raspberrypi                              -  enabled
+ system.adapter.backitup.0               : backitup              : raspberrypi                              -  enabled
  system.adapter.ble.0                    : ble                   : raspberrypi                              -  enabled
  system.adapter.chromecast.0             : chromecast            : raspberrypi                              - disabled
  system.adapter.cloud.0                  : cloud                 : raspberrypi                              -  enabled
+ system.adapter.daikin-cloud.0           : daikin-cloud          : raspberrypi                              -  enabled
  system.adapter.daswetter.0              : daswetter             : raspberrypi                              -  enabled
  system.adapter.device-reminder.1        : device-reminder       : raspberrypi                              -  enabled
+ system.adapter.discovery.0              : discovery             : raspberrypi                              -  enabled
  system.adapter.echarts.0                : echarts               : raspberrypi                              -  enabled
  system.adapter.energiefluss.0           : energiefluss          : raspberrypi                              -  enabled
  system.adapter.flot.0                   : flot                  : raspberrypi                              - disabled
+ system.adapter.fritzbox.0               : fritzbox              : raspberrypi                              -  enabled
  system.adapter.fritzdect.0              : fritzdect             : raspberrypi                              -  enabled
+ system.adapter.history.0                : history               : raspberrypi                              -  enabled
  system.adapter.homeconnect.0            : homeconnect           : raspberrypi                              -  enabled
  system.adapter.hue-extended.0           : hue-extended          : raspberrypi                              -  enabled
+ system.adapter.hue.0                    : hue                   : raspberrypi                              -  enabled, port: 443
  system.adapter.ical.0                   : ical                  : raspberrypi                              -  enabled
  system.adapter.icons-fatcow-hosting.0   : icons-fatcow-hosting  : raspberrypi                              -  enabled
  system.adapter.icons-icons8.0           : icons-icons8          : raspberrypi                              - disabled
  system.adapter.icons-material-png.0     : icons-material-png    : raspberrypi                              - disabled
  system.adapter.icons-mfd-svg.0          : icons-mfd-svg         : raspberrypi                              - disabled
+ system.adapter.influxdb.0               : influxdb              : raspberrypi                              -  enabled, port: 8086
  system.adapter.info.0                   : info                  : raspberrypi                              -  enabled
+ system.adapter.innogy-smarthome.0       : innogy-smarthome      : raspberrypi                              -  enabled
  system.adapter.iqontrol.0               : iqontrol              : raspberrypi                              -  enabled
  system.adapter.jarvis.0                 : jarvis                : raspberrypi                              -  enabled
  system.adapter.km200.0                  : km200                 : raspberrypi                              - disabled
  system.adapter.material.0               : material              : raspberrypi                              - disabled
+ system.adapter.meross.0                 : meross                : raspberrypi                              -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : raspberrypi                              -  enabled, port: 1883, bind: 0.0.0.0
  system.adapter.net-tools.0              : net-tools             : raspberrypi                              - disabled
+ system.adapter.node-red.0               : node-red              : raspberrypi                              -  enabled, port: 1880, bind: 192.168.198.39
  system.adapter.parser.0                 : parser                : raspberrypi                              -  enabled
+ system.adapter.pushover.0               : pushover              : raspberrypi                              -  enabled
  system.adapter.rainbird.0               : rainbird              : raspberrypi                              - disabled
+ system.adapter.rpi2.0                   : rpi2                  : raspberrypi                              -  enabled
  system.adapter.simple-api.0             : simple-api            : raspberrypi                              -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
  system.adapter.sourceanalytix.0         : sourceanalytix        : raspberrypi                              -  enabled
  system.adapter.sprinklecontrol.0        : sprinklecontrol       : raspberrypi                              - disabled
  system.adapter.systeminfo.0             : systeminfo            : raspberrypi                              - disabled
  system.adapter.text2command.0           : text2command          : raspberrypi                              -  enabled
+ system.adapter.tr-064.0                 : tr-064                : raspberrypi                              -  enabled
  system.adapter.trashschedule.0          : trashschedule         : raspberrypi                              -  enabled
  system.adapter.tuya.0                   : tuya                  : raspberrypi                              - disabled
+ system.adapter.tuya.1                   : tuya                  : raspberrypi                              -  enabled
  system.adapter.vis-bars.0               : vis-bars              : raspberrypi                              - disabled
  system.adapter.vis-canvas-gauges.0      : vis-canvas-gauges     : raspberrypi                              - disabled
  system.adapter.vis-colorpicker.0        : vis-colorpicker       : raspberrypi                              - disabled
  system.adapter.vis-fancyswitch.0        : vis-fancyswitch       : raspberrypi                              - disabled
  system.adapter.vis-history.0            : vis-history           : raspberrypi                              - disabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : raspberrypi                              - disabled
  system.adapter.vis-icontwo.0            : vis-icontwo           : raspberrypi                              - disabled
  system.adapter.vis-inventwo.0           : vis-inventwo          : raspberrypi                              -  enabled
  system.adapter.vis-jqui-mfd.0           : vis-jqui-mfd          : raspberrypi                              - disabled
  system.adapter.vis-justgage.0           : vis-justgage          : raspberrypi                              - disabled
  system.adapter.vis-map.0                : vis-map               : raspberrypi                              - disabled
  system.adapter.vis-material-advanced.0  : vis-material-advanced : raspberrypi                              - disabled
  system.adapter.vis-materialdesign.0     : vis-materialdesign    : raspberrypi                              - disabled
  system.adapter.vis-metro.0              : vis-metro             : raspberrypi                              - disabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : raspberrypi                              - disabled
  system.adapter.vis.0                    : vis                   : raspberrypi                              -  enabled
  system.adapter.vw-connect.0             : vw-connect            : raspberrypi                              - disabled
  system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

+ instance is alive

[32mEnabled adapters with bindings[0m
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 192.168.198.39, run as: admin
+ system.adapter.hue.0                    : hue                   : raspberrypi                              -  enabled, port: 443
+ system.adapter.influxdb.0               : influxdb              : raspberrypi                              -  enabled, port: 8086
+ system.adapter.mqtt.0                   : mqtt                  : raspberrypi                              -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.node-red.0               : node-red              : raspberrypi                              -  enabled, port: 1880, bind: 192.168.198.39
  system.adapter.simple-api.0             : simple-api            : raspberrypi                              -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
  system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

[32mioBroker-Repositories[0m
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): beta

[32mInstalled ioBroker-Instances[0m
Used repository: beta
Adapter    "admin"        : 6.3.6    , installed 6.3.5  [Updatable]
Adapter    "alexa2"       : 3.23.2   , installed 3.23.2
Adapter    "alias-manager": 1.2.6    , installed 1.2.6
Adapter    "backitup"     : 2.6.2    , installed 2.5.12 [Updatable]
Adapter    "chromecast"   : 3.0.3    , installed 3.0.3
Adapter    "daikin-cloud" : 0.2.3    , installed 0.2.3
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "flot"         : 1.12.0   , installed 1.12.0
Adapter    "fritzbox"     : 0.5.0    , installed 0.5.0
Adapter    "history"      : 2.2.4    , installed 2.2.4
Adapter    "hue"          : 3.7.1    , installed 3.7.1
Adapter    "ical"         : 1.13.2   , installed 1.13.2
Adapter    "icons-fatcow-hosting": 0.1.0, installed 0.1.0
Adapter    "icons-icons8" : 0.0.1    , installed 0.0.1
Adapter    "icons-material-png": 0.1.0, installed 0.1.0
Adapter    "icons-mfd-svg": 1.1.0    , installed 1.1.0
Adapter    "influxdb"     : 3.2.0    , installed 3.2.0
Adapter    "info"         : 1.9.26   , installed 1.9.26
Adapter    "innogy-smarthome": 1.2.6 , installed 1.2.6
Controller "js-controller": 4.0.24   , installed 4.0.24
Adapter    "km200"        : 2.0.3    , installed 2.0.3
Adapter    "material"     : 1.3.1    , installed 1.3.1
Adapter    "meross"       : 1.15.0   , installed 1.15.0
Adapter    "mqtt"         : 4.0.7    , installed 4.0.7
Adapter    "net-tools"    : 0.2.0    , installed 0.2.0
Adapter    "node-red"     : 4.0.0    , installed 4.0.0
Adapter    "pushover"     : 3.0.3    , installed 3.0.3
Adapter    "rainbird"     : 0.2.2    , installed 0.2.2
Adapter    "rpi2"         : 1.3.2    , installed 1.3.2
Adapter    "sprinklecontrol": 0.2.13 , installed 0.2.13
Adapter    "systeminfo"   : 0.3.1    , installed 0.3.1
Adapter    "tr-064"       : 4.2.18   , installed 4.2.18
Adapter    "tuya"         : 3.14.1   , installed 3.14.1
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "vis-bars"     : 0.1.4    , installed 0.1.4
Adapter    "vis-canvas-gauges": 1.0.1, installed 1.0.1
Adapter    "vis-colorpicker": 1.2.0  , installed 1.2.0
Adapter    "vis-fancyswitch": 1.1.0  , installed 1.1.0
Adapter    "vis-history"  : 1.0.0    , installed 1.0.0
Adapter    "vis-hqwidgets": 1.3.1    , installed 1.3.1
Adapter    "vis-icontwo"  : 0.90.0   , installed 0.90.0
Adapter    "vis-jqui-mfd" : 1.0.12   , installed 1.0.12
Adapter    "vis-justgage" : 1.0.2    , installed 1.0.2
Adapter    "vis-map"      : 1.0.4    , installed 1.0.4
Adapter    "vis-material-advanced": 1.7.2, installed 1.7.2
Adapter    "vis-materialdesign": 0.5.9, installed 0.5.9
Adapter    "vis-metro"    : 1.2.0    , installed 1.2.0
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "vw-connect"   : 0.0.60   , installed 0.0.60

[32mObjects and States[0m
Please stand by - This may take a while

MOD EDIT: LOG FILE AUS TEXT FILE IN CODE TAGS </> GESETZT

wendy2702

@werner2000x sagte in Problem beim Update von Adaptern/Modulen/Controller:

buster

Ich weiss schon was @Thomas-Braun sagt ;-)

Buster ist tod... installiere Bullseye neu

@werner2000x sagte in Problem beim Update von Adaptern/Modulen/Controller:

/usr/bin/nodejs v14.21.3
/usr/bin/node v14.21.3
/usr/bin/npm 9.5.1
/usr/bin/npx 9.5.1

Installiere Node und NPM Sauber, wie das geht steht in der Signatur von Thomas.

Kannst du dir allerdings sparen wenn du eh Bullseye und den iob per einzeiler neu installierst.

Dann backup einspielen und alles ist wieder schick.

Thomas Braun

@wendy2702 sagte in Problem beim Update von Adaptern/Modulen/Controller:

Buster ist tod...

Und die Chancen auf Wiederauferstehung stehen bei Null.

Community Forum

NEWS

Problem beim Update von Adaptern/Modulen/Controller

Support us

896

32.6k

81.9k

1.3m