NEWS
Fehler bei Installation i2c Adapter
Error/Bug
58
Beiträge
4
Kommentatoren
4.1k
Aufrufe
3
Watching
-
@wendy2702 Sorry muss jetzt weg, liefere ich später nach. fixer läuft aus meiner Sicht problemlos durch. Ich poste es später nochmals.
-
@wendy2702 Sorry muss jetzt weg, liefere ich später nach. fixer läuft aus meiner Sicht problemlos durch. Ich poste es später nochmals.
-
@wendy2702 Sorry muss jetzt weg, liefere ich später nach. fixer läuft aus meiner Sicht problemlos durch. Ich poste es später nochmals.
Bring dein System auf Debian11/Bullseye.
-
@wendy2702 Hier nun das log vom fixer (aber da sehe ich auch keine wesentliche Info, die auf ein potentielles Problem hindeutet):
library: loaded Library version=2022-12-09 ========================================================================== Welcome to the ioBroker installation fixer! Script version: 2022-12-22 You might need to enter your password a couple of times. ========================================================================== ========================================================================== Installing prerequisites (1/4) ========================================================================== Holen:1 http://raspbian.raspberrypi.org/raspbian buster InRelease [15.0 kB] OK:2 http://archive.raspberrypi.org/debian buster InRelease OK:3 https://deb.nodesource.com/node_16.x buster InRelease OK:4 https://phoscon.de/apt/deconz buster InRelease Es wurden 15.0 kB in 1 s geholt (10.2 kB/s). Paketlisten werden gelesen... Fertig Installed gcc-c++ ========================================================================== Checking ioBroker user and directory permissions (2/4) ========================================================================== Created /etc/sudoers.d/iobroker Fixing directory permissions... ========================================================================== Database maintenance (3/4) ========================================================================== Checking for uncompressed JSONL databases... This might take a while! Compressing /opt/iobroker/iobroker-data/states.jsonl Compressing /opt/iobroker/iobroker-data/objects.jsonl Compressed 2 JSONL files. Done ========================================================================== Checking autostart (4/4) ========================================================================== Enabling autostart... Autostart enabled! ========================================================================== Your installation was fixed successfully Run iobroker start to start ioBroker again! ========================================================================== -
@wendy2702 Hier nun das log vom fixer (aber da sehe ich auch keine wesentliche Info, die auf ein potentielles Problem hindeutet):
library: loaded Library version=2022-12-09 ========================================================================== Welcome to the ioBroker installation fixer! Script version: 2022-12-22 You might need to enter your password a couple of times. ========================================================================== ========================================================================== Installing prerequisites (1/4) ========================================================================== Holen:1 http://raspbian.raspberrypi.org/raspbian buster InRelease [15.0 kB] OK:2 http://archive.raspberrypi.org/debian buster InRelease OK:3 https://deb.nodesource.com/node_16.x buster InRelease OK:4 https://phoscon.de/apt/deconz buster InRelease Es wurden 15.0 kB in 1 s geholt (10.2 kB/s). Paketlisten werden gelesen... Fertig Installed gcc-c++ ========================================================================== Checking ioBroker user and directory permissions (2/4) ========================================================================== Created /etc/sudoers.d/iobroker Fixing directory permissions... ========================================================================== Database maintenance (3/4) ========================================================================== Checking for uncompressed JSONL databases... This might take a while! Compressing /opt/iobroker/iobroker-data/states.jsonl Compressing /opt/iobroker/iobroker-data/objects.jsonl Compressed 2 JSONL files. Done ========================================================================== Checking autostart (4/4) ========================================================================== Enabling autostart... Autostart enabled! ========================================================================== Your installation was fixed successfully Run iobroker start to start ioBroker again! ==========================================================================Bring dein System auf Debian11/Bullseye.
-
Bring dein System auf Debian11/Bullseye.
-
@thomas-braun Ich höre Dich klar und deutlich, Thomas. Ich war nur so freundlich die Frage von wendy2702 zu beantworten. Danke.
Ist halt die Frage welche Baustelle man zuerst angeht. Das Betriebssystem ist dringlicher.
-
Ist halt die Frage welche Baustelle man zuerst angeht. Das Betriebssystem ist dringlicher.
@thomas-braun Ich habe mir nun Zeit genommen mein OS auf Bullseye upzudaten. Vielen Dank für Deine Anleitung
https://forum.iobroker.net/topic/47213/upgrade-von-debian-10-buster-auf-11-bullseye
Update ist gelungen, ich bin jetzt auf Bullseye mit Node.js: v16.19.1 und NPM: v8.19.3.
iobroker läuft wieder ohne Probleme.
Der Versuch den i2c Adapter zu installieren endet im Wesentlichen mit der gleichen Fehlermeldung. Hat in dieser Sache also noch keinen Fortschritt gebracht. -
@thomas-braun Ich habe mir nun Zeit genommen mein OS auf Bullseye upzudaten. Vielen Dank für Deine Anleitung
https://forum.iobroker.net/topic/47213/upgrade-von-debian-10-buster-auf-11-bullseye
Update ist gelungen, ich bin jetzt auf Bullseye mit Node.js: v16.19.1 und NPM: v8.19.3.
iobroker läuft wieder ohne Probleme.
Der Versuch den i2c Adapter zu installieren endet im Wesentlichen mit der gleichen Fehlermeldung. Hat in dieser Sache also noch keinen Fortschritt gebracht.Dann kannst du ja mit aktuellem OS nochmal
iob diagausführen und bzgl. der Installation auch die vollständigen Rückmeldungen aus dem logfile oder dem Terminal bekannt geben.
-
Dann kannst du ja mit aktuellem OS nochmal
iob diagausführen und bzgl. der Installation auch die vollständigen Rückmeldungen aus dem logfile oder dem Terminal bekannt geben.
@thomas-braun Hier die Infos:
Aus iob diagSkript v.2023-01-02 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.5 Architecture: armv7l Docker: false Virtualization: none Distributor ID: Raspbian Description: Raspbian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)" NAME="Raspbian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=raspbian ID_LIKE=debian HOME_URL="http://www.raspbian.org/" SUPPORT_URL="http://www.raspbian.org/RaspbianForums" BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs" Systemuptime and Load: 15:50:10 up 43 min, 1 user, load average: 0.35, 0.25, 0.31 CPU threads: 4 *** Time and Time Zones *** Sat Feb 18 14:50:10 UTC 2023 Sat Feb 18 15:50:10 CET 2023 CET +0100 Europe/Zurich *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi iobroker pijuice *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 1.1G 2.4G 0.0K 312M 2.9G Swap: 99M 0B 99M Total: 3.9G 1.1G 2.5G 3838 M total memory 1105 M used memory 184 M active memory 1127 M inactive memory 2420 M free memory 50 M buffer memory 262 M swap cache 99 M total swap 0 M used swap 99 M free swap *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 15G 4.8G 9.0G 35% / devtmpfs devtmpfs 1.8G 0 1.8G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 768M 688K 768M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 253M 50M 203M 20% /boot tmpfs tmpfs 384M 0 384M 0% /run/user/1000 Messages in dmesg: [Sat Feb 18 15:06:39 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=E4:5F:01:A8:12:03 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyAMA0,115200 console=tty1 root=PARTUUID=cd3e8f54-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait [Sat Feb 18 15:06:42 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Sat Feb 18 15:06:42 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Sat Feb 18 15:06:44 2023] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null). Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro Files in neuralgic directories: /var: 548M /var/ 299M /var/cache 294M /var/cache/apt 229M /var/cache/apt/archives 95M /var/lib /opt/iobroker/backups: 21M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 234M /opt/iobroker/iobroker-data/ 105M /opt/iobroker/iobroker-data/files 94M /opt/iobroker/iobroker-data/backup-objects 51M /opt/iobroker/iobroker-data/files/javascript.admin 32M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 20M /opt/iobroker/iobroker-data/objects.jsonl 6.9M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/610.de0231c9.chunk.js.map 6.3M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map 6.2M /opt/iobroker/iobroker-data/objects.json.migrated 6.2M /opt/iobroker/iobroker-data/objects.json.bak.migrated *** NodeJS-Installation *** /usr/bin/nodejs v16.19.1 /usr/bin/node v16.19.1 /usr/bin/npm 8.19.3 /usr/bin/npx 8.19.3 nodejs: Installed: 16.19.1-deb-1nodesource1 Candidate: 16.19.1-deb-1nodesource1 Version table: *** 16.19.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_16.x bullseye/main armhf Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u3 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 4.0.24 admin: 6.3.5 javascript: 6.1.4 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi4-iob - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.backitup.0 : backitup : raspberrypi4-iob - enabled + system.adapter.cloud.0 : cloud : raspberrypi4-iob - enabled + system.adapter.denon.0 : denon : raspberrypi4-iob - enabled + system.adapter.denon.1 : denon : raspberrypi4-iob - enabled + system.adapter.discovery.0 : discovery : raspberrypi4-iob - enabled system.adapter.flot.0 : flot : raspberrypi4-iob - disabled + system.adapter.heos.0 : heos : raspberrypi4-iob - enabled + system.adapter.history.0 : history : raspberrypi4-iob - enabled + system.adapter.hue.0 : hue : raspberrypi4-iob - enabled, port: 80 + system.adapter.hue.1 : hue : raspberrypi4-iob - enabled, port: 80 + system.adapter.info.0 : info : raspberrypi4-iob - enabled + system.adapter.javascript.0 : javascript : raspberrypi4-iob - enabled + system.adapter.netatmo.0 : netatmo : raspberrypi4-iob - enabled + system.adapter.ping.0 : ping : raspberrypi4-iob - enabled + system.adapter.rpi2.0 : rpi2 : raspberrypi4-iob - enabled + system.adapter.simple-api.0 : simple-api : raspberrypi4-iob - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.socketio.0 : socketio : raspberrypi4-iob - enabled, port: 8084, bind: 0.0.0.0, run as: admin system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi4-iob - disabled system.adapter.vis.0 : vis : raspberrypi4-iob - enabled + system.adapter.web.0 : web : raspberrypi4-iob - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.yahka.0 : yahka : raspberrypi4-iob - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi4-iob - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.hue.0 : hue : raspberrypi4-iob - enabled, port: 80 + system.adapter.hue.1 : hue : raspberrypi4-iob - enabled, port: 80 + system.adapter.simple-api.0 : simple-api : raspberrypi4-iob - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.socketio.0 : socketio : raspberrypi4-iob - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : raspberrypi4-iob - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.3.5 , installed 6.3.5 Adapter "backitup" : 2.5.12 , installed 2.5.12 Adapter "cloud" : 4.3.0 , installed 4.3.0 Adapter "denon" : 1.13.4 , installed 1.13.4 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "email" : 1.1.4 , installed 1.1.4 Adapter "flot" : 1.11.0 , installed 1.11.0 Adapter "heos" : 1.10.0 , installed 1.10.0 Adapter "history" : 2.2.4 , installed 2.2.4 Adapter "homekit-controller": 0.5.1, installed 0.5.1 Adapter "hue" : 3.7.1 , installed 3.7.1 Adapter "info" : 1.9.19 , installed 1.9.19 Adapter "javascript" : 6.1.4 , installed 6.1.4 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "netatmo" : 2.0.5 , installed 2.0.5 Adapter "ping" : 1.5.3 , installed 1.5.3 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 4.2.0 , installed 4.2.0 Adapter "vis" : 1.4.15 , installed 1.4.15 Adapter "vis-hqwidgets": 1.3.0 , installed 1.3.0 Adapter "web" : 4.3.0 , installed 4.3.0 Adapter "ws" : 1.3.0 , installed 1.3.0 Adapter "yahka" : 0.13.1 , installed 0.13.1 Objects and States Please stand by - This may take a while Objects: 3096 States: 2594 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 https://deb.nodesource.com/node_16.x bullseye InRelease Hit:4 https://phoscon.de/apt/deconz bullseye InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:44821 0.0.0.0:* LISTEN 1001 56591 13999/io.yahka.0 tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 52502 12844/iobroker.js-c tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 52495 12844/iobroker.js-c tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 10727 483/sshd: /usr/sbin tcp6 0 0 :::8082 :::* LISTEN 1001 56445 13795/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 51533 12879/io.admin.0 tcp6 0 0 :::8087 :::* LISTEN 1001 53094 13274/io.simple-api tcp6 0 0 :::8084 :::* LISTEN 1001 52191 13449/io.socketio.0 tcp6 0 0 :::39029 :::* LISTEN 1001 56583 13999/io.yahka.0 tcp6 0 0 :::22 :::* LISTEN 0 10729 483/sshd: /usr/sbin udp 0 0 0.0.0.0:49190 0.0.0.0:* 1001 51872 13217/io.heos.0 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 14614 645/dhcpcd udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 56584 13999/io.yahka.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 11680 363/avahi-daemon: r udp 0 0 0.0.0.0:53498 0.0.0.0:* 108 11682 363/avahi-daemon: r udp6 0 0 :::546 :::* 0 14642 645/dhcpcd udp6 0 0 :::5353 :::* 108 11681 363/avahi-daemon: r udp6 0 0 :::52971 :::* 108 11683 363/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-02-18 15:17:24.642 - info: yahka.0 (13999) adding Wasser Höfli 2A with UUID: e801a2ae-6c62-44d0-870f-a7a316e4a4b6 2023-02-18 15:17:24.646 - info: yahka.0 (13999) adding Wasser Garten 3A with UUID: e7a975c7-14b7-4db6-93c9-a5c06b0f0906 2023-02-18 15:17:24.651 - info: yahka.0 (13999) adding Wasser Garten 4A with UUID: b19d1566-51f7-4dbf-a436-f10b00d4d3bf 2023-02-18 15:17:24.654 - info: yahka.0 (13999) adding Wasser Garten 5A with UUID: cfba9462-495d-445e-bdaf-92d89e5d323c 2023-02-18 15:17:24.659 - info: yahka.0 (13999) adding Wasser Feedback 1 with UUID: 80efd4c4-8f76-48b0-b794-663ac97d7d2a 2023-02-18 15:17:24.662 - info: yahka.0 (13999) adding Wasser Feedback 2 with UUID: c7c1a3fe-b438-43eb-a479-bbda51d1d6c8 2023-02-18 15:17:24.666 - info: yahka.0 (13999) adding Wasser Feedback 3 with UUID: 3270564c-f984-4208-88ed-bcafad48b3e3 2023-02-18 15:17:24.671 - info: yahka.0 (13999) adding Wasser Feedback 4 with UUID: 94316748-7b8a-456d-9813-e1529df2ff42 2023-02-18 15:17:24.675 - info: yahka.0 (13999) adding Wasser Feedback 5 with UUID: 192619c5-90be-4580-8af2-9cdd5282fc7a 2023-02-18 15:17:24.678 - info: yahka.0 (13999) adding Wasser Feedback 6 with UUID: 442ced11-b93a-4a60-9eaf-d6b789ce2e54 2023-02-18 15:17:24.682 - info: yahka.0 (13999) adding Wasser Garten 6A with UUID: 5356872a-1195-47ad-a30c-62d253157baf 2023-02-18 15:17:24.686 - info: yahka.0 (13999) adding Motion Cat1 with UUID: 01ba38ce-6b34-4467-8989-7af6f0774eeb 2023-02-18 15:17:24.689 - info: yahka.0 (13999) adding Motion Cat2 with UUID: 9122c6a7-6598-4298-84f5-ecc8c2598e8d 2023-02-18 15:17:24.692 - info: yahka.0 (13999) publishing bridge Yahka-0 on 0.0.0.0 using ciao 2023-02-18 15:19:16.604 - info: admin.0 (12879) ==> Connected system.user.admin from ::ffff:192.168.1.137 2023-02-18 15:21:14.629 - info: host.raspberrypi4-iob iobroker add i2c auto --host raspberrypi4-iob --debug 2023-02-18 15:21:18.476 - info: host.raspberrypi4-iob iobroker NPM version: 8.19.3 2023-02-18 15:21:18.480 - info: host.raspberrypi4-iob iobroker Installing iobroker.i2c@1.2.1... (System call) 2023-02-18 15:21:27.131 - info: host.raspberrypi4-iob iobroker npm ERR! code 1npm ERR! path /opt/iobroker/node_modules/i2c-bus 2023-02-18 15:21:27.137 - info: host.raspberrypi4-iob iobroker npm ERR! command failed 2023-02-18 15:21:27.138 - info: host.raspberrypi4-iob iobroker npm ERR! command sh -c -- node-gyp rebuildnpm ERR! node:internal/modules/cjs/loader:1024npm ERR! throw err;npm ERR! ^npm ERR! npm ERR! Error: Cannot find module 'object-assign'npm ERR! Require stack:npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/render-template.jsnpm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/plumbing.jsnpm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/index.jsnpm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/npmlog/log.jsnpm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/lib/node-gyp.jsnpm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js 2023-02-18 15:21:27.148 - info: host.raspberrypi4-iob iobroker npm ERR! at Function.Module._resolveFilename (node:internal/modules/cjs/loader:1021:15)npm ERR! at Function.Module._load (node:internal/modules/cjs/loader:866:27)npm ERR! at Module.require (node:internal/modules/cjs/loader:1093:19)npm ERR! at require (node:internal/modules/cjs/helpers:108:18)npm ERR! at Object.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/render-template.js:4:20)npm ERR! at Module._compile (node:internal/modules/cjs/loader:1191:14)npm ERR! at Object.Module._extensions..js (node:internal/modules/cjs/loader:1245:10)npm ERR! at Module.load (node:internal/modules/cjs/loader:1069:32)npm ERR! at Function.Module._load (node:internal/modules/cjs/loader:904:12)npm ERR! at Module.require (node:internal/modules/cjs/loader:1093:19) {npm ERR! code: 'MODULE_NOT_FOUND',npm ERR! requireStack: [npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/render-template.js',npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/plumbing.js',npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/index.js',npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/npmlog/log.js',npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/lib/node-gyp.js',npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js'npm ERR! ]npm ERR! }npm ERR! A complete log of this run can be found in:npm ERR! /home/iobroker/.npm/_logs/2023-02-18T14_21_19_654Z-debug-0.log 2023-02-18 15:21:27.176 - error: host.raspberrypi4-iob iobroker host.raspberrypi4-iob Cannot install iobroker.i2c@1.2.1: 1 2023-02-18 15:21:28.217 - info: host.raspberrypi4-iob iobroker exit 25 2023-02-18 15:28:25.784 - info: admin.0 (12879) <== Disconnect system.user.admin from ::ffff:192.168.1.137 admin======================= SUMMARY ======================= v.2023-01-02 Operatingsystem: Raspbian GNU/Linux 11 (bullseye) Installation: Native Timezone: Europe/Zurich User-ID: 1000 X-Server: false Boot Target: graphical.target Pending OS-Updates: 0 Nodejs-Installation: /usr/bin/nodejs v16.19.1 /usr/bin/node v16.19.1 /usr/bin/npm 8.19.3 /usr/bin/npx 8.19.3 ioBroker Core: js-controller 4.0.24 admin 6.3.5 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin: + system.adapter.admin.0 : admin : raspberrypi4-iob - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin Pending iob updates: 0 Active repo(s): stable Objects: 3096 States: 2594 Size of iob-Database: 20M /opt/iobroker/iobroker-data/objects.jsonl 6.2M /opt/iobroker/iobroker-data/objects.json.migrated 6.2M /opt/iobroker/iobroker-data/objects.json.bak.migrated 2.1M /opt/iobroker/iobroker-data/states.jsonl 684K /opt/iobroker/iobroker-data/states.json.migrated 684K /opt/iobroker/iobroker-data/states.json.bak.migrated =================== END OF SUMMARY ====================Und hier noch das log (wieder diese superlangen Zeilen):
host.raspberrypi4-iob 2023-02-18 15:21:28.217 info iobroker exit 25 host.raspberrypi4-iob 2023-02-18 15:21:27.176 error iobroker host.raspberrypi4-iob Cannot install iobroker.i2c@1.2.1: 1 host.raspberrypi4-iob 2023-02-18 15:21:27.148 info iobroker npm ERR! at Function.Module._resolveFilename (node:internal/modules/cjs/loader:1021:15)npm ERR! at Function.Module._load (node:internal/modules/cjs/loader:866:27)npm ERR! at Module.require (node:internal/modules/cjs/loader:1093:19)npm ERR! at require (node:internal/modules/cjs/helpers:108:18)npm ERR! at Object.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/render-template.js:4:20)npm ERR! at Module._compile (node:internal/modules/cjs/loader:1191:14)npm ERR! at Object.Module._extensions..js (node:internal/modules/cjs/loader:1245:10)npm ERR! at Module.load (node:internal/modules/cjs/loader:1069:32)npm ERR! at Function.Module._load (node:internal/modules/cjs/loader:904:12)npm ERR! at Module.require (node:internal/modules/cjs/loader:1093:19) {npm ERR! code: 'MODULE_NOT_FOUND',npm ERR! requireStack: [npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/render-template.js',npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/plumbing.js',npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/index.js',npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/npmlog/log.js',npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/lib/node-gyp.js',npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js'npm ERR! ]npm ERR! }npm ERR! A complete log of this run can be found in:npm ERR! /home/iobroker/.npm/_logs/2023-02-18T14_21_19_654Z-debug-0.log host.raspberrypi4-iob 2023-02-18 15:21:27.138 info iobroker npm ERR! command sh -c -- node-gyp rebuildnpm ERR! node:internal/modules/cjs/loader:1024npm ERR! throw err;npm ERR! ^npm ERR! npm ERR! Error: Cannot find module 'object-assign'npm ERR! Require stack:npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/render-template.jsnpm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/plumbing.jsnpm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/index.jsnpm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/npmlog/log.jsnpm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/lib/node-gyp.jsnpm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js host.raspberrypi4-iob 2023-02-18 15:21:27.137 info iobroker npm ERR! command failed host.raspberrypi4-iob 2023-02-18 15:21:27.131 info iobroker npm ERR! code 1npm ERR! path /opt/iobroker/node_modules/i2c-bus host.raspberrypi4-iob 2023-02-18 15:21:18.480 info iobroker Installing iobroker.i2c@1.2.1... (System call)Die alternative Lösung ist, dass ich mein i2c Gerät anders ansteuere (über python oder ein C++ Programm) und die Daten dann an iobroker übergebe.
-
@thomas-braun Hier die Infos:
Aus iob diagSkript v.2023-01-02 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.5 Architecture: armv7l Docker: false Virtualization: none Distributor ID: Raspbian Description: Raspbian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)" NAME="Raspbian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=raspbian ID_LIKE=debian HOME_URL="http://www.raspbian.org/" SUPPORT_URL="http://www.raspbian.org/RaspbianForums" BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs" Systemuptime and Load: 15:50:10 up 43 min, 1 user, load average: 0.35, 0.25, 0.31 CPU threads: 4 *** Time and Time Zones *** Sat Feb 18 14:50:10 UTC 2023 Sat Feb 18 15:50:10 CET 2023 CET +0100 Europe/Zurich *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi iobroker pijuice *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 1.1G 2.4G 0.0K 312M 2.9G Swap: 99M 0B 99M Total: 3.9G 1.1G 2.5G 3838 M total memory 1105 M used memory 184 M active memory 1127 M inactive memory 2420 M free memory 50 M buffer memory 262 M swap cache 99 M total swap 0 M used swap 99 M free swap *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 15G 4.8G 9.0G 35% / devtmpfs devtmpfs 1.8G 0 1.8G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 768M 688K 768M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 253M 50M 203M 20% /boot tmpfs tmpfs 384M 0 384M 0% /run/user/1000 Messages in dmesg: [Sat Feb 18 15:06:39 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=E4:5F:01:A8:12:03 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyAMA0,115200 console=tty1 root=PARTUUID=cd3e8f54-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait [Sat Feb 18 15:06:42 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [Sat Feb 18 15:06:42 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Sat Feb 18 15:06:44 2023] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null). Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro Files in neuralgic directories: /var: 548M /var/ 299M /var/cache 294M /var/cache/apt 229M /var/cache/apt/archives 95M /var/lib /opt/iobroker/backups: 21M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 234M /opt/iobroker/iobroker-data/ 105M /opt/iobroker/iobroker-data/files 94M /opt/iobroker/iobroker-data/backup-objects 51M /opt/iobroker/iobroker-data/files/javascript.admin 32M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 20M /opt/iobroker/iobroker-data/objects.jsonl 6.9M /opt/iobroker/iobroker-data/files/javascript.admin/static/js/610.de0231c9.chunk.js.map 6.3M /opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map 6.2M /opt/iobroker/iobroker-data/objects.json.migrated 6.2M /opt/iobroker/iobroker-data/objects.json.bak.migrated *** NodeJS-Installation *** /usr/bin/nodejs v16.19.1 /usr/bin/node v16.19.1 /usr/bin/npm 8.19.3 /usr/bin/npx 8.19.3 nodejs: Installed: 16.19.1-deb-1nodesource1 Candidate: 16.19.1-deb-1nodesource1 Version table: *** 16.19.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_16.x bullseye/main armhf Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u3 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 4.0.24 admin: 6.3.5 javascript: 6.1.4 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypi4-iob - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.backitup.0 : backitup : raspberrypi4-iob - enabled + system.adapter.cloud.0 : cloud : raspberrypi4-iob - enabled + system.adapter.denon.0 : denon : raspberrypi4-iob - enabled + system.adapter.denon.1 : denon : raspberrypi4-iob - enabled + system.adapter.discovery.0 : discovery : raspberrypi4-iob - enabled system.adapter.flot.0 : flot : raspberrypi4-iob - disabled + system.adapter.heos.0 : heos : raspberrypi4-iob - enabled + system.adapter.history.0 : history : raspberrypi4-iob - enabled + system.adapter.hue.0 : hue : raspberrypi4-iob - enabled, port: 80 + system.adapter.hue.1 : hue : raspberrypi4-iob - enabled, port: 80 + system.adapter.info.0 : info : raspberrypi4-iob - enabled + system.adapter.javascript.0 : javascript : raspberrypi4-iob - enabled + system.adapter.netatmo.0 : netatmo : raspberrypi4-iob - enabled + system.adapter.ping.0 : ping : raspberrypi4-iob - enabled + system.adapter.rpi2.0 : rpi2 : raspberrypi4-iob - enabled + system.adapter.simple-api.0 : simple-api : raspberrypi4-iob - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.socketio.0 : socketio : raspberrypi4-iob - enabled, port: 8084, bind: 0.0.0.0, run as: admin system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi4-iob - disabled system.adapter.vis.0 : vis : raspberrypi4-iob - enabled + system.adapter.web.0 : web : raspberrypi4-iob - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.yahka.0 : yahka : raspberrypi4-iob - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi4-iob - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.hue.0 : hue : raspberrypi4-iob - enabled, port: 80 + system.adapter.hue.1 : hue : raspberrypi4-iob - enabled, port: 80 + system.adapter.simple-api.0 : simple-api : raspberrypi4-iob - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.socketio.0 : socketio : raspberrypi4-iob - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : raspberrypi4-iob - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.3.5 , installed 6.3.5 Adapter "backitup" : 2.5.12 , installed 2.5.12 Adapter "cloud" : 4.3.0 , installed 4.3.0 Adapter "denon" : 1.13.4 , installed 1.13.4 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "email" : 1.1.4 , installed 1.1.4 Adapter "flot" : 1.11.0 , installed 1.11.0 Adapter "heos" : 1.10.0 , installed 1.10.0 Adapter "history" : 2.2.4 , installed 2.2.4 Adapter "homekit-controller": 0.5.1, installed 0.5.1 Adapter "hue" : 3.7.1 , installed 3.7.1 Adapter "info" : 1.9.19 , installed 1.9.19 Adapter "javascript" : 6.1.4 , installed 6.1.4 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "netatmo" : 2.0.5 , installed 2.0.5 Adapter "ping" : 1.5.3 , installed 1.5.3 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 4.2.0 , installed 4.2.0 Adapter "vis" : 1.4.15 , installed 1.4.15 Adapter "vis-hqwidgets": 1.3.0 , installed 1.3.0 Adapter "web" : 4.3.0 , installed 4.3.0 Adapter "ws" : 1.3.0 , installed 1.3.0 Adapter "yahka" : 0.13.1 , installed 0.13.1 Objects and States Please stand by - This may take a while Objects: 3096 States: 2594 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 https://deb.nodesource.com/node_16.x bullseye InRelease Hit:4 https://phoscon.de/apt/deconz bullseye InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:44821 0.0.0.0:* LISTEN 1001 56591 13999/io.yahka.0 tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 52502 12844/iobroker.js-c tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 52495 12844/iobroker.js-c tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 10727 483/sshd: /usr/sbin tcp6 0 0 :::8082 :::* LISTEN 1001 56445 13795/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 51533 12879/io.admin.0 tcp6 0 0 :::8087 :::* LISTEN 1001 53094 13274/io.simple-api tcp6 0 0 :::8084 :::* LISTEN 1001 52191 13449/io.socketio.0 tcp6 0 0 :::39029 :::* LISTEN 1001 56583 13999/io.yahka.0 tcp6 0 0 :::22 :::* LISTEN 0 10729 483/sshd: /usr/sbin udp 0 0 0.0.0.0:49190 0.0.0.0:* 1001 51872 13217/io.heos.0 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 14614 645/dhcpcd udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 56584 13999/io.yahka.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 11680 363/avahi-daemon: r udp 0 0 0.0.0.0:53498 0.0.0.0:* 108 11682 363/avahi-daemon: r udp6 0 0 :::546 :::* 0 14642 645/dhcpcd udp6 0 0 :::5353 :::* 108 11681 363/avahi-daemon: r udp6 0 0 :::52971 :::* 108 11683 363/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-02-18 15:17:24.642 - info: yahka.0 (13999) adding Wasser Höfli 2A with UUID: e801a2ae-6c62-44d0-870f-a7a316e4a4b6 2023-02-18 15:17:24.646 - info: yahka.0 (13999) adding Wasser Garten 3A with UUID: e7a975c7-14b7-4db6-93c9-a5c06b0f0906 2023-02-18 15:17:24.651 - info: yahka.0 (13999) adding Wasser Garten 4A with UUID: b19d1566-51f7-4dbf-a436-f10b00d4d3bf 2023-02-18 15:17:24.654 - info: yahka.0 (13999) adding Wasser Garten 5A with UUID: cfba9462-495d-445e-bdaf-92d89e5d323c 2023-02-18 15:17:24.659 - info: yahka.0 (13999) adding Wasser Feedback 1 with UUID: 80efd4c4-8f76-48b0-b794-663ac97d7d2a 2023-02-18 15:17:24.662 - info: yahka.0 (13999) adding Wasser Feedback 2 with UUID: c7c1a3fe-b438-43eb-a479-bbda51d1d6c8 2023-02-18 15:17:24.666 - info: yahka.0 (13999) adding Wasser Feedback 3 with UUID: 3270564c-f984-4208-88ed-bcafad48b3e3 2023-02-18 15:17:24.671 - info: yahka.0 (13999) adding Wasser Feedback 4 with UUID: 94316748-7b8a-456d-9813-e1529df2ff42 2023-02-18 15:17:24.675 - info: yahka.0 (13999) adding Wasser Feedback 5 with UUID: 192619c5-90be-4580-8af2-9cdd5282fc7a 2023-02-18 15:17:24.678 - info: yahka.0 (13999) adding Wasser Feedback 6 with UUID: 442ced11-b93a-4a60-9eaf-d6b789ce2e54 2023-02-18 15:17:24.682 - info: yahka.0 (13999) adding Wasser Garten 6A with UUID: 5356872a-1195-47ad-a30c-62d253157baf 2023-02-18 15:17:24.686 - info: yahka.0 (13999) adding Motion Cat1 with UUID: 01ba38ce-6b34-4467-8989-7af6f0774eeb 2023-02-18 15:17:24.689 - info: yahka.0 (13999) adding Motion Cat2 with UUID: 9122c6a7-6598-4298-84f5-ecc8c2598e8d 2023-02-18 15:17:24.692 - info: yahka.0 (13999) publishing bridge Yahka-0 on 0.0.0.0 using ciao 2023-02-18 15:19:16.604 - info: admin.0 (12879) ==> Connected system.user.admin from ::ffff:192.168.1.137 2023-02-18 15:21:14.629 - info: host.raspberrypi4-iob iobroker add i2c auto --host raspberrypi4-iob --debug 2023-02-18 15:21:18.476 - info: host.raspberrypi4-iob iobroker NPM version: 8.19.3 2023-02-18 15:21:18.480 - info: host.raspberrypi4-iob iobroker Installing iobroker.i2c@1.2.1... (System call) 2023-02-18 15:21:27.131 - info: host.raspberrypi4-iob iobroker npm ERR! code 1npm ERR! path /opt/iobroker/node_modules/i2c-bus 2023-02-18 15:21:27.137 - info: host.raspberrypi4-iob iobroker npm ERR! command failed 2023-02-18 15:21:27.138 - info: host.raspberrypi4-iob iobroker npm ERR! command sh -c -- node-gyp rebuildnpm ERR! node:internal/modules/cjs/loader:1024npm ERR! throw err;npm ERR! ^npm ERR! npm ERR! Error: Cannot find module 'object-assign'npm ERR! Require stack:npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/render-template.jsnpm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/plumbing.jsnpm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/index.jsnpm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/npmlog/log.jsnpm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/lib/node-gyp.jsnpm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js 2023-02-18 15:21:27.148 - info: host.raspberrypi4-iob iobroker npm ERR! at Function.Module._resolveFilename (node:internal/modules/cjs/loader:1021:15)npm ERR! at Function.Module._load (node:internal/modules/cjs/loader:866:27)npm ERR! at Module.require (node:internal/modules/cjs/loader:1093:19)npm ERR! at require (node:internal/modules/cjs/helpers:108:18)npm ERR! at Object.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/render-template.js:4:20)npm ERR! at Module._compile (node:internal/modules/cjs/loader:1191:14)npm ERR! at Object.Module._extensions..js (node:internal/modules/cjs/loader:1245:10)npm ERR! at Module.load (node:internal/modules/cjs/loader:1069:32)npm ERR! at Function.Module._load (node:internal/modules/cjs/loader:904:12)npm ERR! at Module.require (node:internal/modules/cjs/loader:1093:19) {npm ERR! code: 'MODULE_NOT_FOUND',npm ERR! requireStack: [npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/render-template.js',npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/plumbing.js',npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/index.js',npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/npmlog/log.js',npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/lib/node-gyp.js',npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js'npm ERR! ]npm ERR! }npm ERR! A complete log of this run can be found in:npm ERR! /home/iobroker/.npm/_logs/2023-02-18T14_21_19_654Z-debug-0.log 2023-02-18 15:21:27.176 - error: host.raspberrypi4-iob iobroker host.raspberrypi4-iob Cannot install iobroker.i2c@1.2.1: 1 2023-02-18 15:21:28.217 - info: host.raspberrypi4-iob iobroker exit 25 2023-02-18 15:28:25.784 - info: admin.0 (12879) <== Disconnect system.user.admin from ::ffff:192.168.1.137 admin======================= SUMMARY ======================= v.2023-01-02 Operatingsystem: Raspbian GNU/Linux 11 (bullseye) Installation: Native Timezone: Europe/Zurich User-ID: 1000 X-Server: false Boot Target: graphical.target Pending OS-Updates: 0 Nodejs-Installation: /usr/bin/nodejs v16.19.1 /usr/bin/node v16.19.1 /usr/bin/npm 8.19.3 /usr/bin/npx 8.19.3 ioBroker Core: js-controller 4.0.24 admin 6.3.5 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin: + system.adapter.admin.0 : admin : raspberrypi4-iob - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin Pending iob updates: 0 Active repo(s): stable Objects: 3096 States: 2594 Size of iob-Database: 20M /opt/iobroker/iobroker-data/objects.jsonl 6.2M /opt/iobroker/iobroker-data/objects.json.migrated 6.2M /opt/iobroker/iobroker-data/objects.json.bak.migrated 2.1M /opt/iobroker/iobroker-data/states.jsonl 684K /opt/iobroker/iobroker-data/states.json.migrated 684K /opt/iobroker/iobroker-data/states.json.bak.migrated =================== END OF SUMMARY ====================Und hier noch das log (wieder diese superlangen Zeilen):
host.raspberrypi4-iob 2023-02-18 15:21:28.217 info iobroker exit 25 host.raspberrypi4-iob 2023-02-18 15:21:27.176 error iobroker host.raspberrypi4-iob Cannot install iobroker.i2c@1.2.1: 1 host.raspberrypi4-iob 2023-02-18 15:21:27.148 info iobroker npm ERR! at Function.Module._resolveFilename (node:internal/modules/cjs/loader:1021:15)npm ERR! at Function.Module._load (node:internal/modules/cjs/loader:866:27)npm ERR! at Module.require (node:internal/modules/cjs/loader:1093:19)npm ERR! at require (node:internal/modules/cjs/helpers:108:18)npm ERR! at Object.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/render-template.js:4:20)npm ERR! at Module._compile (node:internal/modules/cjs/loader:1191:14)npm ERR! at Object.Module._extensions..js (node:internal/modules/cjs/loader:1245:10)npm ERR! at Module.load (node:internal/modules/cjs/loader:1069:32)npm ERR! at Function.Module._load (node:internal/modules/cjs/loader:904:12)npm ERR! at Module.require (node:internal/modules/cjs/loader:1093:19) {npm ERR! code: 'MODULE_NOT_FOUND',npm ERR! requireStack: [npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/render-template.js',npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/plumbing.js',npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/index.js',npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/npmlog/log.js',npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/lib/node-gyp.js',npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js'npm ERR! ]npm ERR! }npm ERR! A complete log of this run can be found in:npm ERR! /home/iobroker/.npm/_logs/2023-02-18T14_21_19_654Z-debug-0.log host.raspberrypi4-iob 2023-02-18 15:21:27.138 info iobroker npm ERR! command sh -c -- node-gyp rebuildnpm ERR! node:internal/modules/cjs/loader:1024npm ERR! throw err;npm ERR! ^npm ERR! npm ERR! Error: Cannot find module 'object-assign'npm ERR! Require stack:npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/render-template.jsnpm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/plumbing.jsnpm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/index.jsnpm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/npmlog/log.jsnpm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/lib/node-gyp.jsnpm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js host.raspberrypi4-iob 2023-02-18 15:21:27.137 info iobroker npm ERR! command failed host.raspberrypi4-iob 2023-02-18 15:21:27.131 info iobroker npm ERR! code 1npm ERR! path /opt/iobroker/node_modules/i2c-bus host.raspberrypi4-iob 2023-02-18 15:21:18.480 info iobroker Installing iobroker.i2c@1.2.1... (System call)Die alternative Lösung ist, dass ich mein i2c Gerät anders ansteuere (über python oder ein C++ Programm) und die Daten dann an iobroker übergebe.
Warum hast du nicht die 64bit-Version genommen?
-
Warum hast du nicht die 64bit-Version genommen?
@thomas-braun Ja, das ist mir auch aufgefallen. Ich habe den Update nach Deiner Anleitung durchgeführt, und das ursprüngliche System war eben noch 32-bit. Der Update bleibt auf dieser Variante, so wie ich das verstehe. 64-bit würde eine komplette Neuinstallation bedeuten, korrekt?
-
@thomas-braun Ja, das ist mir auch aufgefallen. Ich habe den Update nach Deiner Anleitung durchgeführt, und das ursprüngliche System war eben noch 32-bit. Der Update bleibt auf dieser Variante, so wie ich das verstehe. 64-bit würde eine komplette Neuinstallation bedeuten, korrekt?
-
@thomas-braun Ja, das ist mir auch aufgefallen. Ich habe den Update nach Deiner Anleitung durchgeführt, und das ursprüngliche System war eben noch 32-bit. Der Update bleibt auf dieser Variante, so wie ich das verstehe. 64-bit würde eine komplette Neuinstallation bedeuten, korrekt?
cd /opt/iobroker npm ls npm ls object-assign -
cd /opt/iobroker npm ls npm ls object-assign@thomas-braun So sieht es aus:
iobroker.inst@3.0.0 /opt/iobroker ├── @types/caseless@0.12.2 extraneous ├── @types/request@2.48.8 extraneous ├── @types/tough-cookie@4.0.2 extraneous ├── coffeescript@1.12.7 extraneous ├── iobroker.admin@6.3.5 ├── iobroker.backitup@2.5.12 ├── iobroker.cloud@4.3.0 ├── iobroker.denon@1.13.4 ├── iobroker.discovery@3.1.0 ├── iobroker.email@1.1.4 ├── iobroker.flot@1.11.0 ├── iobroker.heos@1.10.0 ├── iobroker.history@2.2.4 ├── iobroker.homekit-controller@0.5.1 ├── iobroker.hue@3.7.1 ├── iobroker.info@1.9.19 ├── iobroker.javascript@6.1.4 ├── iobroker.js-controller@4.0.24 ├── iobroker.netatmo@2.0.5 ├── iobroker.ping@1.5.3 ├── iobroker.rpi2@1.3.2 ├── iobroker.simple-api@2.7.2 ├── iobroker.socketio@4.2.0 ├── iobroker.vis-hqwidgets@1.3.0 ├── iobroker.vis@1.4.15 ├── iobroker.web@4.3.0 ├── iobroker.yahka@0.13.1 ├── jsonata@1.8.6 extraneous ├── node-inspect@2.0.0 extraneous ├── picocolors@1.0.0 extraneous ├── suncalc2@1.8.1 extraneous ├── typescript@4.8.2 extraneous ├── virtual-tsc@0.6.2 extraneous └── wake_on_lan@1.0.0 extraneousiobroker.inst@3.0.0 /opt/iobroker └─┬ iobroker.homekit-controller@0.5.1 └─┬ hap-controller@0.8.1 └─┬ @abandonware/noble@1.9.2-15 └─┬ @abandonware/bluetooth-hci-socket@0.5.3-8 └─┬ @mapbox/node-pre-gyp@1.0.9 └─┬ npmlog@5.0.1 └─┬ gauge@3.0.2 └── object-assign@4.1.1 -
@thomas-braun So sieht es aus:
iobroker.inst@3.0.0 /opt/iobroker ├── @types/caseless@0.12.2 extraneous ├── @types/request@2.48.8 extraneous ├── @types/tough-cookie@4.0.2 extraneous ├── coffeescript@1.12.7 extraneous ├── iobroker.admin@6.3.5 ├── iobroker.backitup@2.5.12 ├── iobroker.cloud@4.3.0 ├── iobroker.denon@1.13.4 ├── iobroker.discovery@3.1.0 ├── iobroker.email@1.1.4 ├── iobroker.flot@1.11.0 ├── iobroker.heos@1.10.0 ├── iobroker.history@2.2.4 ├── iobroker.homekit-controller@0.5.1 ├── iobroker.hue@3.7.1 ├── iobroker.info@1.9.19 ├── iobroker.javascript@6.1.4 ├── iobroker.js-controller@4.0.24 ├── iobroker.netatmo@2.0.5 ├── iobroker.ping@1.5.3 ├── iobroker.rpi2@1.3.2 ├── iobroker.simple-api@2.7.2 ├── iobroker.socketio@4.2.0 ├── iobroker.vis-hqwidgets@1.3.0 ├── iobroker.vis@1.4.15 ├── iobroker.web@4.3.0 ├── iobroker.yahka@0.13.1 ├── jsonata@1.8.6 extraneous ├── node-inspect@2.0.0 extraneous ├── picocolors@1.0.0 extraneous ├── suncalc2@1.8.1 extraneous ├── typescript@4.8.2 extraneous ├── virtual-tsc@0.6.2 extraneous └── wake_on_lan@1.0.0 extraneousiobroker.inst@3.0.0 /opt/iobroker └─┬ iobroker.homekit-controller@0.5.1 └─┬ hap-controller@0.8.1 └─┬ @abandonware/noble@1.9.2-15 └─┬ @abandonware/bluetooth-hci-socket@0.5.3-8 └─┬ @mapbox/node-pre-gyp@1.0.9 └─┬ npmlog@5.0.1 └─┬ gauge@3.0.2 └── object-assign@4.1.1cd /opt/iobroker npm cache clear --force iobroker add i2c --debugBitte immer vollständig aus der Konsole kopieren, inkl. log in prompt usw.
-
cd /opt/iobroker npm cache clear --force iobroker add i2c --debugBitte immer vollständig aus der Konsole kopieren, inkl. log in prompt usw.
@thomas-braun Das löschen des Caches scheint auch nichts zu bringen.
pi@raspberrypi4-iob:/opt/iobroker $ npm cache clear --force npm WARN using --force Recommended protections disabled. pi@raspberrypi4-iob:/opt/iobroker $ iobroker add i2c auto --debug NPM version: 8.19.3 Installing iobroker.i2c@1.2.1... (System call) npm ERR! code 1 npm ERR! path /opt/iobroker/node_modules/i2c-bus npm ERR! command failed npm ERR! command sh -c -- node-gyp rebuild npm ERR! node:internal/modules/cjs/loader:1024 npm ERR! throw err; npm ERR! ^ npm ERR! npm ERR! Error: Cannot find module 'object-assign' npm ERR! Require stack: npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/render-template.js npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/plumbing.js npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/index.js npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/npmlog/log.js npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/lib/node-gyp.js npm ERR! - /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js npm ERR! at Function.Module._resolveFilename (node:internal/modules/cjs/loader:1021:15) npm ERR! at Function.Module._load (node:internal/modules/cjs/loader:866:27) npm ERR! at Module.require (node:internal/modules/cjs/loader:1093:19) npm ERR! at require (node:internal/modules/cjs/helpers:108:18) npm ERR! at Object.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/r ender-template.js:4:20) npm ERR! at Module._compile (node:internal/modules/cjs/loader:1191:14) npm ERR! at Object.Module._extensions..js (node:internal/modules/cjs/loader:1245:10) npm ERR! at Module.load (node:internal/modules/cjs/loader:1069:32) npm ERR! at Function.Module._load (node:internal/modules/cjs/loader:904:12) npm ERR! at Module.require (node:internal/modules/cjs/loader:1093:19) { npm ERR! code: 'MODULE_NOT_FOUND', npm ERR! requireStack: [ npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/render-template.js', npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/plumbing.js', npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/gauge/index.js', npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/node_modules/npmlog/log.js', npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/lib/node-gyp.js', npm ERR! '/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js' npm ERR! ] npm ERR! } npm ERR! A complete log of this run can be found in: npm ERR! /home/iobroker/.npm/_logs/2023-02-18T15_54_49_210Z-debug-0.log host.raspberrypi4-iob Cannot install iobroker.i2c@1.2.1: 1 -
cd /opt/iobroker npm cache clear --force iobroker add i2c --debugBitte immer vollständig aus der Konsole kopieren, inkl. log in prompt usw.
@thomas-braun Bemerkung dazu: Ich habe davor iobroker nicht gestoppt. Ist das korrekt?
-
@thomas-braun Bemerkung dazu: Ich habe davor iobroker nicht gestoppt. Ist das korrekt?
apt policy npm node-gyp nodejs -
@thomas-braun Bemerkung dazu: Ich habe davor iobroker nicht gestoppt. Ist das korrekt?
@chris_b sagte in Fehler bei Installation i2c Adapter:
Ich habe davor iobroker nicht gestoppt. Ist das korrekt?
Das ist wurscht.
Support us
378
Online32.6k
Benutzer82.0k
Themen1.3m
Beiträge