Admin startet nicht mehr
-
Passt.
Tendenziell geht dir aber der Arbeitsspeicher aus. Musst du mal beobachten. -
@thomas-braun
Ok, ist mir noch garnicht aufgefallen. Ich denke da wird auf kurz oder lang nicht mehr viel an Adaptern etc dazu kommen. Den PI kann man wohl nicht aufrüsten? Oder kann man da administrativ was dran drehen? -
@iced112 sagte in Admin startet nicht mehr:
Den PI kann man wohl nicht aufrüsten?
Nein.
Oder kann man da administrativ was dran drehen?
Ich würde überlegen ob du die Adapter wirklich alle benötigst. Da sind bestimmt zwei, drei dabei die entbehrlich sind.
-
@djmarc75 sagte in Admin startet nicht mehr:
iobroker start admin
Hallo an alle, bei mir stürzt nämlich auch der Admin ab und zu ab.
Der Instanz ist nicht immer in die liste an. Wenn ich es Manuel starte, läuft es eine weile.
Der iobroker diag Befehl, gibt bei mir nur die help liste aus, komisch.pi@HomeAutomation:~ $ iobroker list instances system.adapter.admin.0 : admin : HomeAutomation - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : HomeAutomation - enabled + system.adapter.chromecast.0 : chromecast : HomeAutomation - enabled system.adapter.daswetter.0 : daswetter : HomeAutomation - disabled + system.adapter.device-reminder.0 : device-reminder : HomeAutomation - enabled system.adapter.devices.0 : devices : HomeAutomation - enabled + system.adapter.discovery.0 : discovery : HomeAutomation - enabled + system.adapter.ds18b20.0 : ds18b20 : HomeAutomation - enabled system.adapter.echarts.0 : echarts : HomeAutomation - disabled + system.adapter.email.0 : email : HomeAutomation - enabled system.adapter.feiertage.0 : feiertage : HomeAutomation - disabled system.adapter.flot.0 : flot : HomeAutomation - enabled system.adapter.fully-tablet-control.0 : fully-tablet-control : HomeAutomation - disabled + system.adapter.ham.0 : ham : HomeAutomation - enabled system.adapter.heatingcontrol.0 : heatingcontrol : HomeAutomation - disabled system.adapter.history.0 : history : HomeAutomation - enabled system.adapter.i2c.0 : i2c : HomeAutomation - disabled system.adapter.ical.0 : ical : HomeAutomation - enabled system.adapter.icons-icons8.0 : icons-icons8 : HomeAutomation - enabled system.adapter.icons-material-png.0 : icons-material-png : HomeAutomation - enabled system.adapter.icons-mfd-png.0 : icons-mfd-png : HomeAutomation - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : HomeAutomation - enabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: HomeAutomation - enabled + system.adapter.influxdb.0 : influxdb : HomeAutomation - enabled, port: 8086 + system.adapter.info.0 : info : HomeAutomation - enabled + system.adapter.iot.0 : iot : HomeAutomation - enabled + system.adapter.jarvis.0 : jarvis : HomeAutomation - enabled + system.adapter.javascript.0 : javascript : HomeAutomation - enabled system.adapter.lgtv.0 : lgtv : HomeAutomation - disabled + system.adapter.modbus.0 : modbus : HomeAutomation - enabled system.adapter.modbus.1 : modbus : HomeAutomation - disabled + system.adapter.modbus.2 : modbus : HomeAutomation - enabled + system.adapter.mqtt.0 : mqtt : HomeAutomation - enabled, port: 1885, bind: 0.0.0.0 + system.adapter.net-tools.0 : net-tools : HomeAutomation - enabled + system.adapter.node-red.0 : node-red : HomeAutomation - enabled, port: 1880, bind: 0.0.0.0 system.adapter.paw.0 : paw : HomeAutomation - disabled, port: 2323 system.adapter.ping.0 : ping : HomeAutomation - disabled system.adapter.pushsafer.0 : pushsafer : HomeAutomation - disabled + system.adapter.rpi2.0 : rpi2 : HomeAutomation - enabled system.adapter.samsung.0 : samsung : HomeAutomation - disabled system.adapter.samsung_tizen.0 : samsung_tizen : HomeAutomation - disabled, port: 8002 + system.adapter.sayit.0 : sayit : HomeAutomation - enabled, port: 0 system.adapter.schoolfree.0 : schoolfree : HomeAutomation - enabled system.adapter.shuttercontrol.0 : shuttercontrol : HomeAutomation - disabled + system.adapter.sonoff.0 : sonoff : HomeAutomation - enabled, port: 1883, bind: 0.0.0.0 system.adapter.speedport.0 : speedport : HomeAutomation - disabled + system.adapter.tankerkoenig.0 : tankerkoenig : HomeAutomation - enabled + system.adapter.telegram.0 : telegram : HomeAutomation - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : HomeAutomation - enabled system.adapter.trashschedule.0 : trashschedule : HomeAutomation - disabled + system.adapter.tuya.0 : tuya : HomeAutomation - enabled + system.adapter.virtualpowermeter.0 : virtualpowermeter : HomeAutomation - enabled system.adapter.vis-bars.0 : vis-bars : HomeAutomation - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : HomeAutomation - enabled system.adapter.vis-colorpicker.0 : vis-colorpicker : HomeAutomation - enabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : HomeAutomation - enabled system.adapter.vis-google-fonts.0 : vis-google-fonts : HomeAutomation - enabled system.adapter.vis-history.0 : vis-history : HomeAutomation - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : HomeAutomation - enabled system.adapter.vis-icontwo.0 : vis-icontwo : HomeAutomation - enabled + system.adapter.vis-inventwo.0 : vis-inventwo : HomeAutomation - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : HomeAutomation - enabled system.adapter.vis-justgage.0 : vis-justgage : HomeAutomation - enabled system.adapter.vis-keyboard.0 : vis-keyboard : HomeAutomation - enabled system.adapter.vis-lcars.0 : vis-lcars : HomeAutomation - enabled system.adapter.vis-map.0 : vis-map : HomeAutomation - enabled system.adapter.vis-material-advanced.0 : vis-material-advanced : HomeAutomation - enabled system.adapter.vis-metro.0 : vis-metro : HomeAutomation - enabled system.adapter.vis-players.0 : vis-players : HomeAutomation - enabled system.adapter.vis-plumb.0 : vis-plumb : HomeAutomation - enabled system.adapter.vis-rgraph.0 : vis-rgraph : HomeAutomation - enabled system.adapter.vis.0 : vis : HomeAutomation - enabled + system.adapter.web.0 : web : HomeAutomation - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.whatsapp-cmb.0 : whatsapp-cmb : HomeAutomation - disabled system.adapter.whatsapp-cmb.1 : whatsapp-cmb : HomeAutomation - disabled system.adapter.wifilight.0 : wifilight : HomeAutomation - disabled + system.adapter.yahka.0 : yahka : HomeAutomation - enabled system.adapter.yahka.1 : yahka : HomeAutomation - disabled + instance is alive pi@HomeAutomation:~ $ iobroker diag iobroker [command] Commands: iobroker setup Setup ioBroker iobroker start [all|<adapter>.<instance>] Starts the js-controller or a specified adapter instance iobroker stop [<adapter>.<instance>] stops the js-controller or a specified adapter instance iobroker restart [<adapter>.<instance>] Restarts js-controller or a specified adapter instance [aliases: r] iobroker debug <adapter>[.<instance>] Starts a Node.js debugging session for the adapter instance iobroker info Shows the host info iobroker logs [<adapter>] Monitor log iobroker add <adapter> [desiredNumber] Add instance of adapter [aliases: a] iobroker install <adapter> Installs a specified adapter [aliases: i] iobroker rebuild [<module>] Rebuild all native modules or path iobroker url <url> [<name>] Install adapter from specified url, e.g. GitHub iobroker del <adapter> Remove adapter and all instances from this host [aliases: delete] iobroker del <adapter>.<instance> Remove adapter instance [aliases: delete] iobroker update [<repositoryUrl>] Update repository and list adapters iobroker upgrade Upgrade management iobroker upload [all|<adapter>] Upload management [aliases: u] iobroker object Object management [aliases: o] iobroker state State management [aliases: s] iobroker message <adapter>[.instance] <command> [<message>] Send message to adapter instance/s iobroker list <type> [<filter>] List all entries, like objects iobroker chmod <mode> <file> Change file rights iobroker chown <user> <group> <file> Change file ownership iobroker touch <file> Touch file iobroker rm <file> Remove file iobroker file File management iobroker user User commands iobroker group group management iobroker host <hostname> Set host to given hostname iobroker set <adapter>.<instance> Change settings of adapter config iobroker license <license.file or license.text> Update license by given file iobroker cert Certificate management iobroker clean <yes> Clears all objects and states iobroker backup Create backup iobroker restore <backup name or path> Restore a specified backup iobroker validate <backup name or path> Validate a specified backup iobroker status [all|<adapter>.<instance>] Status of ioBroker or adapter instance [aliases: isrun] iobroker repo [<name>] Show repo information iobroker uuid Show uuid of the installation [aliases: id] iobroker unsetup Reset license, installation secret and language iobroker fix Execute the installation fixer script, this updates your ioBroker installation iobroker multihost Multihost management iobroker compact compact group management iobroker plugin Plugin management iobroker version [<adapter>] Show version of js-controller or specified adapter [aliases: v] Options: --help Show help [boolean]ich habe keine ideen mehr was es sein könnte.
danke schn mal im voraus für eure Hilfe. -
iobroker stop iobroker fix iobroker start iobroker diag -
Hallo Thomas, danke, es hat funktioniert.
Anbei das Ergebnis.======================= SUMMARY ======================= v.2022-12-13 Operatingsystem: Raspbian GNU/Linux 10 (buster) Installation: Native Timezone: Europe/Berlin User-ID: 1000 X-Server: true Pending OS-Updates: 74 Nodejs-Installation: /usr/bin/nodejs v16.17.1 /usr/bin/node v16.17.1 /usr/bin/npm 8.19.2 ioBroker Core: js-controller 4.0.23 admin 6.3.5 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Pending iob updates: 0 Active repo(s): Stable (default) Objects: 6537 States: 5071 Size of iob-Database: 8.8M /opt/iobroker/iobroker-data/objects.jsonl 6.7M /opt/iobroker/iobroker-data/objects.json.migrated 6.7M /opt/iobroker/iobroker-data/objects.json.bak.migrated 2.2M /opt/iobroker/iobroker-data/states.jsonl 816K /opt/iobroker/iobroker-data/states.json.migrated 816K /opt/iobroker/iobroker-data/states.json.bak.migrated 0 /opt/iobroker/iobroker-data/states.json.broken ====================== END OF SUMMARY ================== -
*** ioBroker Diagnosis *** Please stretch the window of your terminal programm (puTTY) as wide as possible or switch to full screen The following checks may give hints to potential malconfigurations or errors, please post them in our forum: https://forum.iobroker.net Just copy and paste the Summary Page, including the ``` characters at start and end. It helps us to help you! Press any key to continue ======== Start marking the full check here ========= Skript v.2022-12-13 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.4 Architecture: armv7l Docker: false Virtualization: none Distributor ID: Raspbian Description: Raspbian GNU/Linux 10 (buster) Release: 10 Codename: buster PRETTY_NAME="Raspbian GNU/Linux 10 (buster)" NAME="Raspbian GNU/Linux" VERSION_ID="10" VERSION="10 (buster)" VERSION_CODENAME=buster ID=raspbian ID_LIKE=debian HOME_URL="http://www.raspbian.org/" SUPPORT_URL="http://www.raspbian.org/RaspbianForums" BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs" Systemuptime and Load: 10:39:03 up 2:24, 2 users, load average: 2.11, 2.56, 2.59 CPU threads: 4 *** Time and Time Zones *** Tue Dec 27 09:39:03 UTC 2022 Tue Dec 27 10:39:03 CET 2022 CET +0100 Europe/Berlin *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker *** X-Server-Setup *** X-Server: true Desktop: LXDE-pi Terminal: x11 *** MEMORY *** total used free shared buff/cache available Mem: 7.9G 1.7G 4.6G 125M 1.7G 6.3G Swap: 99M 0B 99M Total: 8.0G 1.7G 4.7G 7897 M total memory 1677 M used memory 526 M active memory 2540 M inactive memory 4551 M free memory 240 M buffer memory 1427 M swap cache 99 M total swap 0 M used swap 99 M free swap *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 118G 13G 101G 11% / devtmpfs devtmpfs 3.7G 0 3.7G 0% /dev tmpfs tmpfs 3.9G 1.7M 3.9G 1% /dev/shm tmpfs tmpfs 3.9G 74M 3.8G 2% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup /dev/sda1 vfat 253M 49M 204M 20% /boot tmpfs tmpfs 790M 12K 790M 1% /run/user/1000 Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime |-/sys/fs/bpf none bpf rw,nosuid,nodev,noexec,relatime,mode=700 |-/run/user/1000/gvfs gvfsd-fuse fuse.gvfsd-fuse rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 `-/boot /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 2.6G /var/ 1.1G /var/cache/apt/archives 1.1G /var/cache/apt 1.1G /var/cache 1002M /var/log /opt/iobroker/backups: 1.8G /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 786M /opt/iobroker/iobroker-data/ 509M /opt/iobroker/iobroker-data/files 92M /opt/iobroker/iobroker-data/node-red 91M /opt/iobroker/iobroker-data/node-red/node_modules 86M /opt/iobroker/iobroker-data/backup-objects The five largest files in iobroker-data are: 33M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.10538062.js.map 15M /opt/iobroker/iobroker-data/files/telegram.admin/rules/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-1d9f06.44fe4a3f.chunk.js.map 9.7M /opt/iobroker/iobroker-data/files/text2command.admin/static/js/main.bbfeb1bf.js.map 9.1M /opt/iobroker/iobroker-data/files/echarts.admin/static/js/2.bbf74d5f.chunk.js.map 8.9M /opt/iobroker/iobroker-data/files/echarts/static/js/2.3d2d025f.chunk.js.map *** NodeJS-Installation *** /usr/bin/nodejs v16.17.1 /usr/bin/node v16.17.1 /usr/bin/npm 8.19.2 nodejs: Installed: 16.17.1-deb-1nodesource1 Candidate: 16.19.0-deb-1nodesource1 Version table: 16.19.0-deb-1nodesource1 500 500 https://deb.nodesource.com/node_16.x buster/main armhf Packages *** 16.17.1-deb-1nodesource1 100 100 /var/lib/dpkg/status 10.24.0~dfsg-1~deb10u2 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages Temp directories causing npm8 problem: 0 *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 4.0.23 admin: 6.3.5 Adapters from github: 3 Enabled adapters with bindings + system.adapter.admin.0 : admin : HomeAutomation - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.influxdb.0 : influxdb : HomeAutomation - enabled, port: 8086 + system.adapter.mqtt.0 : mqtt : HomeAutomation - enabled, port: 1885, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : HomeAutomation - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.sayit.0 : sayit : HomeAutomation - enabled, port: 0 + system.adapter.sonoff.0 : sonoff : HomeAutomation - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : HomeAutomation - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : HomeAutomation - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories Stable (default): http://download.iobroker.net/sources-dist.json Beta (latest) : http://download.iobroker.net/sources-dist-latest.json Active repo(s): Stable (default) ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 6.3.5 , installed 6.3.5 Adapter "backitup" : 2.5.9 , installed 2.5.9 Adapter "chromecast" : 2.3.1 , installed 2.3.1 Adapter "daswetter" : 3.1.4 , installed 3.1.4 Adapter "device-reminder": 1.2.9 , installed 1.2.9 Adapter "devices" : 1.1.2 , installed 1.1.2 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "ds18b20" : 1.6.1 , installed 1.6.1 Adapter "echarts" : 1.0.12 , installed 1.0.12 Adapter "email" : 1.1.4 , installed 1.1.4 Adapter "feiertage" : 1.1.0 , installed 1.1.0 Adapter "flot" : 1.11.0 , installed 1.11.0 Adapter "fullybrowser" : 2.1.2 , installed 2.1.2 Adapter "ham" : 5.3.1 , installed 5.3.1 Adapter "heatingcontrol": 2.9.3 , installed 2.9.3 Adapter "history" : 2.2.4 , installed 2.2.4 Adapter "i2c" : 1.2.1 , installed 1.2.1 Adapter "ical" : 1.13.2 , installed 1.13.2 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.1.0 , installed 1.1.0 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "influxdb" : 3.2.0 , installed 3.2.0 Adapter "info" : 1.9.19 , installed 1.9.19 Adapter "iot" : 1.11.9 , installed 1.11.9 Adapter "jarvis" : 3.1.2 , installed 3.1.2 Adapter "javascript" : 6.1.4 , installed 6.1.4 Controller "js-controller": 4.0.23 , installed 4.0.23 Adapter "lgtv" : 1.1.10 , installed 1.1.10 Adapter "modbus" : 5.0.11 , installed 5.0.11 Adapter "mqtt" : 4.0.7 , installed 4.0.7 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "node-red" : 4.0.0 , installed 4.0.0 Adapter "paw" : 0.3.2 , installed 0.3.2 Adapter "ping" : 1.5.3 , installed 1.5.3 Adapter "places" : 1.1.2 , installed 1.1.2 Adapter "psa" : 0.0.11 , installed 0.0.11 Adapter "pushsafer" : 1.0.3 , installed 1.0.3 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "samsung" : 0.5.11 , installed 0.5.11 Adapter "sayit" : 1.12.3 , installed 1.12.3 Adapter "schoolfree" : 1.0.1 , installed 1.0.1 Adapter "shuttercontrol": 1.4.18 , installed 1.4.18 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 4.2.0 , installed 4.2.0 Adapter "sonoff" : 2.5.1 , installed 2.5.1 Adapter "tankerkoenig" : 3.1.0 , installed 3.1.0 Adapter "telegram" : 1.15.2 , installed 1.15.2 Adapter "text2command" : 2.3.0 , installed 2.3.0 Adapter "tr-064" : 4.2.17 , installed 4.2.17 Adapter "trashschedule": 2.0.3 , installed 2.0.3 Adapter "tuya" : 3.11.1 , installed 3.11.1 Adapter "virtualpowermeter": 1.4.6, installed 1.4.6 Adapter "vis" : 1.4.15 , installed 1.4.15 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-colorpicker": 1.2.0 , installed 1.2.0 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-google-fonts": 1.0.4 , installed 1.0.4 Adapter "vis-history" : 1.0.0 , installed 1.0.0 Adapter "vis-hqwidgets": 1.3.0 , installed 1.3.0 Adapter "vis-icontwo" : 0.90.0 , installed 0.90.0 Adapter "vis-inventwo" : 3.3.1 , installed 3.3.1 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-justgage" : 1.0.2 , installed 1.0.2 Adapter "vis-keyboard" : 0.0.2 , installed 0.0.2 Adapter "vis-lcars" : 1.0.4 , installed 1.0.4 Adapter "vis-map" : 1.0.4 , installed 1.0.4 Adapter "vis-material-advanced": 1.7.2, installed 1.7.2 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-players" : 0.1.6 , installed 0.1.6 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2 Adapter "web" : 4.3.0 , installed 4.3.0 Adapter "whatsapp-cmb" : 0.2.3 , installed 0.2.3 Adapter "wifilight" : 1.1.4 , installed 1.1.4 Adapter "ws" : 1.3.0 , installed 1.3.0 Adapter "yahka" : 0.13.1 , installed 0.13.1 Objects and States Please stand by - This may take a while Objects: 6537 States: 5070 *** OS-Repositories and Updates *** E: Repository 'https://packages.grafana.com/oss/deb stable InRelease' changed its 'Origin' value from 'grafana stable' to '. stable' E: Repository 'https://packages.grafana.com/oss/deb stable InRelease' changed its 'Label' value from 'grafana stable' to '. stable' Pending Updates: 74 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:8400 0.0.0.0:* LISTEN 1001 1527171 25234/io.jarvis.0 tcp 0 0 0.0.0.0:53 0.0.0.0:* LISTEN 0 14319 577/dnsmasq tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 17752 552/sshd tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 15673 372/cupsd tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1001 1518166 21372/node-red tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 999 14331 499/influxd tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 1518129 22389/io.sonoff.0 tcp 0 0 0.0.0.0:1885 0.0.0.0:* LISTEN 1001 1514484 22107/io.mqtt.0 tcp 0 0 0.0.0.0:1886 0.0.0.0:* LISTEN 1001 1514485 22107/io.mqtt.0 tcp 0 0 0.0.0.0:7070 0.0.0.0:* LISTEN 0 17800 514/anydesk tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 1507075 19141/iobroker.js-c tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 1507068 19141/iobroker.js-c tcp 0 0 0.0.0.0:35789 0.0.0.0:* LISTEN 0 35725 514/anydesk tcp6 0 0 :::8081 :::* LISTEN 1001 1509661 19484/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 1532606 26604/io.web.0 tcp6 0 0 :::46163 :::* LISTEN 1001 1516423 21372/node-red tcp6 0 0 :::53 :::* LISTEN 0 14321 577/dnsmasq tcp6 0 0 :::8086 :::* LISTEN 999 19382 499/influxd tcp6 0 0 :::22 :::* LISTEN 0 17754 552/sshd tcp6 0 0 ::1:631 :::* LISTEN 0 15672 372/cupsd tcp6 0 0 :::3000 :::* LISTEN 117 20679 488/grafana-server tcp6 0 0 :::45665 :::* LISTEN 1001 1518656 21372/node-red udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 1518873 22710/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 1518874 22710/io.tuya.0 udp 0 0 0.0.0.0:53 0.0.0.0:* 0 14318 577/dnsmasq udp 2624 0 0.0.0.0:68 0.0.0.0:* 0 20843 416/dhcpcd udp 0 0 0.0.0.0:631 0.0.0.0:* 0 18488 508/cups-browsed udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 1521559 24181/io.chromecast udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 1516452 21372/node-red udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 1516449 21372/node-red udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 15678 410/avahi-daemon: r udp 0 0 0.0.0.0:50001 0.0.0.0:* 0 22414 514/anydesk udp 0 0 0.0.0.0:58711 0.0.0.0:* 108 15680 410/avahi-daemon: r udp6 0 0 :::58809 :::* 108 15681 410/avahi-daemon: r udp6 0 0 :::546 :::* 0 21468 416/dhcpcd udp6 0 0 :::53 :::* 0 14320 577/dnsmasq udp6 0 0 :::5353 :::* 108 15679 410/avahi-daemon: r Mark until here for C&P iob diag has finished. -
@phoenixcr sagte in Admin startet nicht mehr:
buster
Buster hat sein End Of Life erreicht. Installier da das 'Bullseye'-Release.
Und zwar dann OHNE Desktop. -
@thomas-braun
ich brauche aber das Desktop, zwecks Fernzugriff.
Glaubst du, das ist das Problem der abstürzte?
Danke! -
@phoenixcr sagte in Admin startet nicht mehr:
ich brauche aber das Desktop, zwecks Fernzugriff.
Macht man per SSH und Kommandozeile. OHNE DESKTOP!!
-
@thomas-braun
Ich hänge mich hier mal mit einer Frage dran, da es nicht lohnt dafür einen neuen Thread zu öffnen.
Nachdem ich meinen ioBroker auf neue Hardware umgezogen habe, hat der Admin adapter nun die Nummer 2.
Also admin.2 und nicht admin.0.
Kann das irgendwann mal Probleme machen? Sollte ich das ändern? -
@thomas-braun
erledigt, ohne Desktop.
Selber Verhältnis.
In log, steht nichts Besonderes
fehlt sogar der Export Knopf
-
-
@thomas-braun sagte in Admin startet nicht mehr:
iobroker diag
*** ioBroker Diagnosis *** Please stretch the window of your terminal programm (puTTY) as wide as possible or switch to full screen The following checks may give hints to potential malconfigurations or errors, please post them in our forum: https://forum.iobroker.net Just copy and paste the Summary Page, including the ``` characters at start and end. It helps us to help you! Press any key to continue ======== Start marking the full check here ========= Skript v.2022-12-13 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.4 Architecture: armv7l Docker: false Virtualization: none Distributor ID: Raspbian Description: Raspbian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)" NAME="Raspbian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=raspbian ID_LIKE=debian HOME_URL="http://www.raspbian.org/" SUPPORT_URL="http://www.raspbian.org/RaspbianForums" BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs" Systemuptime and Load: 19:57:59 up 4:13, 1 user, load average: 1.41, 1.63, 2.53 CPU threads: 4 *** Time and Time Zones *** Tue Dec 27 19:57:59 UTC 2022 Tue Dec 27 19:57:59 GMT 2022 GMT +0000 Europe/London *** User and Groups *** chris /home/chris chris adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty *** MEMORY *** total used free shared buff/cache available Mem: 7.9G 1.5G 4.4G 0.0K 2.0G 6.4G Swap: 99M 1.0M 98M Total: 8.0G 1.5G 4.5G 7897 M total memory 1490 M used memory 701 M active memory 2533 M inactive memory 4388 M free memory 151 M buffer memory 1867 M swap cache 99 M total swap 1 M used swap 98 M free swap *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 118G 5.0G 108G 5% / devtmpfs devtmpfs 3.7G 0 3.7G 0% /dev tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 1.6G 1.2M 1.6G 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/sda1 vfat 255M 50M 206M 20% /boot tmpfs tmpfs 790M 0 790M 0% /run/user/1000 Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime `-/boot /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 542M /var/ 282M /var/cache 276M /var/cache/apt 212M /var/cache/apt/archives 98M /var/lib /opt/iobroker/backups: 240M /opt/iobroker/backups/ 118M /opt/iobroker/backups/Influxdb /opt/iobroker/iobroker-data: 529M /opt/iobroker/iobroker-data/ 428M /opt/iobroker/iobroker-data/files 79M /opt/iobroker/iobroker-data/node-red/node_modules 79M /opt/iobroker/iobroker-data/node-red 78M /opt/iobroker/iobroker-data/files/icons-open-icon-library-png The five largest files in iobroker-data are: 33M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.10538062.js.map 17M /opt/iobroker/iobroker-data/objects.jsonl 15M /opt/iobroker/iobroker-data/files/telegram.admin/rules/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-1d9f06.44fe4a3f.chunk.js.map 9.7M /opt/iobroker/iobroker-data/files/text2command.admin/static/js/main.bbfeb1bf.js.map 9.1M /opt/iobroker/iobroker-data/files/echarts.admin/static/js/2.bbf74d5f.chunk.js.map *** NodeJS-Installation *** /usr/bin/nodejs v16.19.0 /usr/bin/node v16.19.0 /usr/bin/npm 8.19.3 nodejs: Installed: 16.19.0-deb-1nodesource1 Candidate: 16.19.0-deb-1nodesource1 Version table: *** 16.19.0-deb-1nodesource1 500 500 https://deb.nodesource.com/node_16.x bullseye/main armhf Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u1 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 4.0.23 admin: 6.3.5 Adapters from github: 2 Enabled adapters with bindings + system.adapter.admin.0 : admin : homeautomationcretu - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.mqtt.0 : mqtt : homeautomationcretu - enabled, port: 1885, bind: 0.0.0.0 + system.adapter.sayit.0 : sayit : homeautomationcretu - enabled, port: 0 + system.adapter.telegram.0 : telegram : homeautomationcretu - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : homeautomationcretu - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories Stable (default): http://download.iobroker.net/sources-dist.json Beta (latest) : http://download.iobroker.net/sources-dist-latest.json Active repo(s): Stable (default) ioBroker-Instances Used repository: Stable (default) Adapter "admin" : 6.3.5 , installed 6.3.5 Adapter "backitup" : 2.5.9 , installed 2.5.9 Adapter "chromecast" : 2.3.1 , installed 2.3.1 Adapter "daswetter" : 3.1.4 , installed 3.1.4 Adapter "device-reminder": 1.2.9 , installed 1.2.9 Adapter "devices" : 1.1.2 , installed 1.1.2 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "ds18b20" : 1.6.1 , installed 1.6.1 Adapter "echarts" : 1.0.12 , installed 1.0.12 Adapter "email" : 1.1.4 , installed 1.1.4 Adapter "feiertage" : 1.1.0 , installed 1.1.0 Adapter "flot" : 1.11.0 , installed 1.11.0 Adapter "ham" : 5.3.1 , installed 5.3.1 Adapter "heatingcontrol": 2.9.3 , installed 2.9.3 Adapter "history" : 2.2.4 , installed 2.2.4 Adapter "i2c" : 1.2.1 , installed 1.2.1 Adapter "ical" : 1.13.2 , installed 1.13.2 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.1.0 , installed 1.1.0 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "influxdb" : 3.2.0 , installed 3.2.0 Adapter "info" : 1.9.19 , installed 1.9.19 Adapter "iot" : 1.11.9 , installed 1.11.9 Adapter "jarvis" : 3.1.2 , installed 3.1.2 Adapter "javascript" : 6.1.4 , installed 6.1.4 Controller "js-controller": 4.0.23 , installed 4.0.23 Adapter "lgtv" : 1.1.10 , installed 1.1.10 Adapter "modbus" : 5.0.11 , installed 5.0.11 Adapter "mqtt" : 4.0.7 , installed 4.0.7 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "node-red" : 4.0.0 , installed 4.0.0 Adapter "paw" : 0.3.2 , installed 0.3.2 Adapter "ping" : 1.5.3 , installed 1.5.3 Adapter "pushsafer" : 1.0.3 , installed 1.0.3 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "sayit" : 1.12.3 , installed 1.12.3 Adapter "schoolfree" : 1.0.1 , installed 1.0.1 Adapter "shuttercontrol": 1.4.18 , installed 1.4.18 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 4.2.0 , installed 4.2.0 Adapter "sonoff" : 2.5.1 , installed 2.5.1 Adapter "tankerkoenig" : 3.1.0 , installed 3.1.0 Adapter "telegram" : 1.15.2 , installed 1.15.2 Adapter "text2command" : 2.3.0 , installed 2.3.0 Adapter "trashschedule": 2.0.3 , installed 2.0.3 Adapter "tuya" : 3.11.1 , installed 3.11.1 Adapter "virtualpowermeter": 1.4.6, installed 1.4.6 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-colorpicker": 1.2.0 , installed 1.2.0 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-google-fonts": 1.0.4 , installed 1.0.4 Adapter "vis-history" : 1.0.0 , installed 1.0.0 Adapter "vis-hqwidgets": 1.3.0 , installed 1.3.0 Adapter "vis-icontwo" : 0.90.0 , installed 0.90.0 Adapter "vis-inventwo" : 3.3.1 , installed 3.3.1 Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12 Adapter "vis-justgage" : 1.0.2 , installed 1.0.2 Adapter "vis-keyboard" : 0.0.2 , installed 0.0.2 Adapter "vis-lcars" : 1.0.4 , installed 1.0.4 Adapter "vis-map" : 1.0.4 , installed 1.0.4 Adapter "vis-material-advanced": 1.7.2, installed 1.7.2 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-players" : 0.1.6 , installed 0.1.6 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2 Adapter "web" : 4.3.0 , installed 4.3.0 Adapter "whatsapp-cmb" : 0.2.3 , installed 0.2.3 Adapter "wifilight" : 1.1.4 , installed 1.1.4 Adapter "ws" : 1.3.0 , installed 1.3.0 Adapter "yahka" : 0.13.1 , installed 0.13.1 Objects and States Please stand by - This may take a while Objects: 6463 States: 5008 *** OS-Repositories and Updates *** Hit:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease Hit:3 https://repos.influxdata.com/debian bullseye InRelease Hit:4 https://apt.grafana.com stable InRelease Hit:5 https://deb.nodesource.com/node_16.x bullseye InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:8400 0.0.0.0:* LISTEN 1001 45447 10525/io.jarvis.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 11762 541/sshd: /usr/sbin tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 999 140894 26161/influxd tcp 0 0 0.0.0.0:1885 0.0.0.0:* LISTEN 1001 44880 11581/io.mqtt.0 tcp 0 0 0.0.0.0:1886 0.0.0.0:* LISTEN 1001 44881 11581/io.mqtt.0 tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 16053 1795/iobroker.js-co tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 16046 1795/iobroker.js-co tcp6 0 0 :::22 :::* LISTEN 0 11764 541/sshd: /usr/sbin tcp6 0 0 :::8081 :::* LISTEN 1001 16122 1823/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 30720 7826/io.web.0 tcp6 0 0 :::8086 :::* LISTEN 999 141933 26161/influxd tcp6 0 0 :::3000 :::* LISTEN 110 77925 17659/grafana-serve udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 33946 7993/io.chromecast. udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 11593 403/avahi-daemon: r udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 32188 7852/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 32189 7852/io.tuya.0 udp 0 0 0.0.0.0:43026 0.0.0.0:* 108 11595 403/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 0 14566 783/dhcpcd udp6 0 0 :::5353 :::* 108 11594 403/avahi-daemon: r udp6 0 0 :::56192 :::* 108 11596 403/avahi-daemon: r udp6 0 0 :::546 :::* 0 14628 783/dhcpcd ============ Mark until here for C&P ============= iob diag has finished. Press any key for a summary -
-
@phoenixcr sagte in Admin startet nicht mehr:
bei mir stürzt nämlich auch der Admin ab und zu ab
ist das alles an Informationen?
-
Zurzeit ja.
Vielen Dank. -
Siehe oben.
Aber im Moment läuft es. -
@thomas-braun
geht wieder nicht
und der diag bleibt hängen beim repositories/ /dev/sda2 ext4 rw,noatime `-/boot /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 864M /var/ 358M /var/lib 282M /var/cache 276M /var/cache/apt 263M /var/lib/influxdb /opt/iobroker/backups: 588M /opt/iobroker/backups/ 345M /opt/iobroker/backups/influxdbold 302M /opt/iobroker/backups/influxdbold/data 261M /opt/iobroker/backups/influxdbold/data/iobroker 229M /opt/iobroker/backups/influxdbold/data/iobroker/autogen /opt/iobroker/iobroker-data: 554M /opt/iobroker/iobroker-data/ 428M /opt/iobroker/iobroker-data/files 84M /opt/iobroker/iobroker-data/node-red/node_modules 84M /opt/iobroker/iobroker-data/node-red 78M /opt/iobroker/iobroker-data/files/icons-open-icon-library-png The five largest files in iobroker-data are: 33M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.10538062.js.map 22M /opt/iobroker/iobroker-data/objects.jsonl 15M /opt/iobroker/iobroker-data/files/telegram.admin/rules/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-1d9f06.44fe4a3f.chunk.js.map 9.7M /opt/iobroker/iobroker-data/files/text2command.admin/static/js/main.bbfeb1bf.js.map 9.1M /opt/iobroker/iobroker-data/files/echarts.admin/static/js/2.bbf74d5f.chunk.js.map *** NodeJS-Installation *** /usr/bin/nodejs v16.19.0 /usr/bin/node v16.19.0 /usr/bin/npm 8.19.3 nodejs: Installed: 16.19.0-deb-1nodesource1 Candidate: 16.19.0-deb-1nodesource1 Version table: *** 16.19.0-deb-1nodesource1 500 500 https://deb.nodesource.com/node_16.x bullseye/main armhf Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u1 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 *** ioBroker-Installation *** ioBroker Status No connection to databases possible ... Core adapters versions js-controller: 4.0.23 admin: 6.3.5 Adapters from github: 2 Enabled adapters with bindings ioBroker-Repositories -
@phoenixcr sagte in Admin startet nicht mehr:
und der diag bleibt hängen beim repositories
Das dürfte lediglich länger dauern, wenn der iobroker nicht läuft.
