ioBroker nichts geht mehr

iKlaus · 4 Dec 2022, 18:45

                                                    
                                                                            klaus@ioroker:~$ iobroker status
                                            
                                                    
                                                                            No connection to databases possible ...

Thomas Braun · 4 Dec 2022, 18:46

@iklaus

Und die anderen beiden Kommandos?

iKlaus · 4 Dec 2022, 18:48

@thomas-braun

                                                    
                                                                            klaus@ioroker:~$ iobroker start
                                            
                                                    
                                                                            klaus@ioroker:~$ iobroker update
                                            
                                                    
                                                                            No connection to databases possible ...

Thomas Braun · 4 Dec 2022, 18:51

@iklaus

Was ist das eigentlich für Hardware da?
Das System läuft auf einer SD-Karte, aber auf x86_64 CPU, dann ist swap riiiiesig usw...

iKlaus · 4 Dec 2022, 18:53

@thomas-braun
ein mini PC extra dafür gekauft!

Thomas Braun · 4 Dec 2022, 18:55

@iklaus

Es könnte sein, dass das Dateisystem zicken macht.

dmesg -T | grep -i ext4

sagt?

iKlaus · 4 Dec 2022, 18:56

@thomas-braun

                                                    
                                                                            klaus@ioroker:~$ dmesg -T | grep -i ext4
                                            
                                                    
                                                                            dmesg: read kernel buffer failed: Operation not permitted

Thomas Braun · 4 Dec 2022, 18:57

@iklaus

sudo dmesg -T | grep -i ext4

iKlaus · 4 Dec 2022, 19:03

@thomas-braun

Nach 5 minuten immer noch kweine antwort

Thomas Braun · 4 Dec 2022, 19:04

@iklaus

Laufen lassen...
Und bitte keine Screenshots aus Konsolistan.

iKlaus · 4 Dec 2022, 19:44

@thomas-braun dauert das immer soooooo lange steht immer noch und kein Ergebnis

Thomas Braun · 4 Dec 2022, 19:46

@iklaus

Normalerweise nicht.
Deutet aber auch auf ein Hardware/Kernel-nahes Problem hin.

iKlaus · 4 Dec 2022, 19:47

@thomas-braun das heisst kaputto ?

Thomas Braun · 4 Dec 2022, 19:50

@iklaus

sudo dmesg

spuckt was aus?
Kann lang sein, vermutlich reichen aber die letzen 20-30 Zeilen.

Thomas Braun · 4 Dec 2022, 19:51

@iklaus

Hier dauert das übrigens nur Sekundenbruchtteile:

echad@chet:~ $ time dmesg -T | grep -i ext4
[Tue Nov 29 18:39:43 2022] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=E4:5F:01:0B:F7:93 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000  console=tty1 root=PARTUUID=34b785c5-02 rootfstype=ext4 fsck.repair=yes rootwait
[Tue Nov 29 18:39:45 2022] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[Tue Nov 29 18:39:45 2022] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[Tue Nov 29 18:39:46 2022] EXT4-fs (sda2): re-mounted. Opts: (null). Quota mode: none.

real    0m0.012s
user    0m0.005s
sys     0m0.013s

iKlaus · 4 Dec 2022, 19:52

@thomas-braun Spuckt reichlich aus

letzten Zeilen

Device= 1.00
[   85.615975] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   85.615982] usb 1-2: Product: ConBee II
[   85.615988] usb 1-2: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[   85.615994] usb 1-2: SerialNumber: DE2219489
[   85.618028] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[   89.005344] usb 1-2: USB disconnect, device number 7
[   89.385250] usb 1-2: new full-speed USB device number 8 using xhci_hcd
[   89.534839] usb 1-2: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[   89.534851] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   89.534853] usb 1-2: Product: ConBee II
[   89.534856] usb 1-2: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[   89.534858] usb 1-2: SerialNumber: DE2219489
[   89.536528] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[  127.579902] usb 1-2: USB disconnect, device number 8
[  127.891262] usb 1-2: new full-speed USB device number 9 using xhci_hcd
[  128.041402] usb 1-2: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[  128.041423] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  128.041430] usb 1-2: Product: ConBee II
[  128.041436] usb 1-2: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[  128.041442] usb 1-2: SerialNumber: DE2219489
[  128.043717] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[  131.428552] usb 1-2: USB disconnect, device number 9
[  131.807175] usb 1-2: new full-speed USB device number 10 using xhci_hcd
[  131.957155] usb 1-2: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[  131.957176] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  131.957184] usb 1-2: Product: ConBee II
[  131.957190] usb 1-2: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[  131.957196] usb 1-2: SerialNumber: DE2219489
[  131.959466] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[  161.016384] usb 1-2: USB disconnect, device number 10
[  161.324306] usb 1-2: new full-speed USB device number 11 using xhci_hcd
[  161.474333] usb 1-2: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[  161.474345] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  161.474348] usb 1-2: Product: ConBee II
[  161.474351] usb 1-2: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[  161.474353] usb 1-2: SerialNumber: DE2219489
[  161.476438] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[  164.867707] usb 1-2: USB disconnect, device number 11
[  165.216054] usb 1-2: new full-speed USB device number 12 using xhci_hcd
[  165.366042] usb 1-2: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[  165.366063] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  165.366071] usb 1-2: Product: ConBee II
[  165.366077] usb 1-2: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[  165.366083] usb 1-2: SerialNumber: DE2219489
[  165.373468] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[  200.424948] usb 1-2: USB disconnect, device number 12
[  200.736900] usb 1-2: new full-speed USB device number 13 using xhci_hcd
[  200.887450] usb 1-2: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[  200.887462] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  200.887465] usb 1-2: Product: ConBee II
[  200.887467] usb 1-2: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[  200.887469] usb 1-2: SerialNumber: DE2219489
[  200.891185] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[  204.275499] usb 1-2: USB disconnect, device number 13
[  204.652843] usb 1-2: new full-speed USB device number 14 using xhci_hcd
[  204.802942] usb 1-2: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[  204.802955] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  204.802958] usb 1-2: Product: ConBee II
[  204.802961] usb 1-2: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[  204.802963] usb 1-2: SerialNumber: DE2219489
[  204.804509] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[  242.855120] usb 1-2: USB disconnect, device number 14
[  243.162762] usb 1-2: new full-speed USB device number 15 using xhci_hcd
[  243.312389] usb 1-2: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[  243.312401] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  243.312404] usb 1-2: Product: ConBee II
[  243.312407] usb 1-2: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[  243.312409] usb 1-2: SerialNumber: DE2219489
[  243.313962] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[  246.706183] usb 1-2: USB disconnect, device number 15
[  247.054585] usb 1-2: new full-speed USB device number 16 using xhci_hcd
[  247.204719] usb 1-2: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[  247.204730] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  247.204733] usb 1-2: Product: ConBee II
[  247.204736] usb 1-2: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[  247.204738] usb 1-2: SerialNumber: DE2219489
[  247.206996] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[  284.267146] usb 1-2: USB disconnect, device number 16
[  284.577561] usb 1-2: new full-speed USB device number 17 using xhci_hcd
[  284.727013] usb 1-2: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[  284.727024] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  284.727027] usb 1-2: Product: ConBee II
[  284.727029] usb 1-2: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[  284.727032] usb 1-2: SerialNumber: DE2219489
[  284.728944] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[  288.120604] usb 1-2: USB disconnect, device number 17
[  288.469596] usb 1-2: new full-speed USB device number 18 using xhci_hcd
[  288.619365] usb 1-2: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[  288.619378] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  288.619381] usb 1-2: Product: ConBee II
[  288.619384] usb 1-2: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[  288.619386] usb 1-2: SerialNumber: DE2219489
[  288.622610] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[  570.738313] perf: interrupt took too long (2513 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
[  692.090403] perf: interrupt took too long (3153 > 3141), lowering kernel.perf_event_max_sample_rate to 63250
[  878.401433] perf: interrupt took too long (3967 > 3941), lowering kernel.perf_event_max_sample_rate to 50250
[ 1158.961071] perf: interrupt took too long (4962 > 4958), lowering kernel.perf_event_max_sample_rate to 40250
[ 1617.912375] perf: interrupt took too long (6204 > 6202), lowering kernel.perf_event_max_sample_rate to 32000
[ 2262.764304] FS-Cache: Loaded
[ 2262.868141] FS-Cache: Netfs 'cifs' registered for caching
[ 2262.899673] Key type cifs.spnego registered
[ 2262.899705] Key type cifs.idmap registered
[ 2262.902443] CIFS: Attempting to mount \\192.168.178.200\ioBrokerBackup
[ 2266.390149] CIFS: VFS: Error connecting to socket. Aborting operation.
[ 2266.390181] CIFS: VFS: cifs_mount failed w/return code = -113
[ 2266.426897] CIFS: No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3.1.1), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3.1.1 (or even SMB3 or SMB2.1) specify vers=1.0 on mount.
[ 2266.426907] CIFS: Attempting to mount \\192.168.178.200\ioBrokerBackup
[ 2272.570109] CIFS: VFS: Error connecting to socket. Aborting operation.
[ 2272.570142] CIFS: VFS: cifs_mount failed w/return code = -113
[ 3804.008511] perf: interrupt took too long (7933 > 7755), lowering kernel.perf_event_max_sample_rate to 25000
klaus@ioroker:~$

Thomas Braun · 4 Dec 2022, 19:54

@iklaus

sudo dmesg -T

Am besten dann aber doch die vollständige Ausgabe.

iKlaus · 4 Dec 2022, 19:54

@thomas-braun

t=0030, bcdDevice= 1.00
[So Dez  4 19:14:58 2022] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[So Dez  4 19:14:58 2022] usb 1-2: Product: ConBee II
[So Dez  4 19:14:58 2022] usb 1-2: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[So Dez  4 19:14:58 2022] usb 1-2: SerialNumber: DE2219489
[So Dez  4 19:14:58 2022] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[So Dez  4 19:15:02 2022] usb 1-2: USB disconnect, device number 17
[So Dez  4 19:15:02 2022] usb 1-2: new full-speed USB device number 18 using xhci_hcd
[So Dez  4 19:15:02 2022] usb 1-2: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00
[So Dez  4 19:15:02 2022] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[So Dez  4 19:15:02 2022] usb 1-2: Product: ConBee II
[So Dez  4 19:15:02 2022] usb 1-2: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[So Dez  4 19:15:02 2022] usb 1-2: SerialNumber: DE2219489
[So Dez  4 19:15:02 2022] cdc_acm 1-2:1.0: ttyACM0: USB ACM device
[So Dez  4 19:19:44 2022] perf: interrupt took too long (2513 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
[So Dez  4 19:21:46 2022] perf: interrupt took too long (3153 > 3141), lowering kernel.perf_event_max_sample_rate to 63250
[So Dez  4 19:24:52 2022] perf: interrupt took too long (3967 > 3941), lowering kernel.perf_event_max_sample_rate to 50250
[So Dez  4 19:29:32 2022] perf: interrupt took too long (4962 > 4958), lowering kernel.perf_event_max_sample_rate to 40250
[So Dez  4 19:37:11 2022] perf: interrupt took too long (6204 > 6202), lowering kernel.perf_event_max_sample_rate to 32000
[So Dez  4 19:47:56 2022] FS-Cache: Loaded
[So Dez  4 19:47:56 2022] FS-Cache: Netfs 'cifs' registered for caching
[So Dez  4 19:47:56 2022] Key type cifs.spnego registered
[So Dez  4 19:47:56 2022] Key type cifs.idmap registered
[So Dez  4 19:47:56 2022] CIFS: Attempting to mount \\192.168.178.200\ioBrokerBackup
[So Dez  4 19:48:00 2022] CIFS: VFS: Error connecting to socket. Aborting operation.
[So Dez  4 19:48:00 2022] CIFS: VFS: cifs_mount failed w/return code = -113
[So Dez  4 19:48:00 2022] CIFS: No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3.1.1), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3.1.1 (or even SMB3 or SMB2.1) specify vers=1.0 on mount.
[So Dez  4 19:48:00 2022] CIFS: Attempting to mount \\192.168.178.200\ioBrokerBackup
[So Dez  4 19:48:06 2022] CIFS: VFS: Error connecting to socket. Aborting operation.
[So Dez  4 19:48:06 2022] CIFS: VFS: cifs_mount failed w/return code = -113
[So Dez  4 20:13:38 2022] perf: interrupt took too long (7933 > 7755), lowering kernel.perf_event_max_sample_rate to 25000
klaus@ioroker:~$

Thomas Braun · 4 Dec 2022, 19:58

@iklaus

Das riecht nach Trouble. Ich hatte mal ähnliche Meldungen wie diese:

                                                    
                                                                            [So Dez  4 19:19:44 2022] perf: interrupt took too long (2513 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
                                            
                                                    
                                                                            [So Dez  4 19:21:46 2022] perf: interrupt took too long (3153 > 3141), lowering kernel.perf_event_max_sample_rate to 63250
                                            
                                                    
                                                                            [So Dez  4 19:24:52 2022] perf: interrupt took too long (3967 > 3941), lowering kernel.perf_event_max_sample_rate to 50250
                                            
                                                    
                                                                            [So Dez  4 19:29:32 2022] perf: interrupt took too long (4962 > 4958), lowering kernel.perf_event_max_sample_rate to 40250
                                            
                                                    
                                                                            [So Dez  4 19:37:11 2022] perf: interrupt took too long (6204 > 6202), lowering kernel.perf_event_max_sample_rate to 32000

Kurz darauf ist die SD-Karte abgeraucht.
Höchste Eisenbahn da was frisches zu installieren, Backup mit intakten Daten einspielen.

iKlaus · 4 Dec 2022, 20:02

@thomas-braun ok das heisst neu machen alles !

Das kann ich aber erst nächstes Wochenende machen bin Fernfahrer darf um 4 Uhr los fahren und bin dann erst Wochenende wieder da !

Bräuchte dann noch mal hilfe wegen backup

Danke dir erst einmal !

Werde den Rechner aus machen geht so oder so nichts in mom!

Habe ja noch einen mini PC hier stehen !

NEWS

ioBroker nichts geht mehr

Support us

1.2k
Online

31.4k
Users

79.0k
Topics

1.3m
Posts

	klaus@ioroker:~$ iobroker status
	No connection to databases possible ...

	klaus@ioroker:~$ iobroker start
	klaus@ioroker:~$ iobroker update
	No connection to databases possible ...

	klaus@ioroker:~$ dmesg -T \| grep -i ext4
	dmesg: read kernel buffer failed: Operation not permitted

	[So Dez 4 19:19:44 2022] perf: interrupt took too long (2513 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
	[So Dez 4 19:21:46 2022] perf: interrupt took too long (3153 > 3141), lowering kernel.perf_event_max_sample_rate to 63250
	[So Dez 4 19:24:52 2022] perf: interrupt took too long (3967 > 3941), lowering kernel.perf_event_max_sample_rate to 50250
	[So Dez 4 19:29:32 2022] perf: interrupt took too long (4962 > 4958), lowering kernel.perf_event_max_sample_rate to 40250
	[So Dez 4 19:37:11 2022] perf: interrupt took too long (6204 > 6202), lowering kernel.perf_event_max_sample_rate to 32000

NEWS

ioBroker nichts geht mehr

Support us

1.2kOnline

31.4kUsers

79.0kTopics

1.3mPosts

1.2k
Online

31.4k
Users

79.0k
Topics

1.3m
Posts