Navigation

    Logo
    • Register
    • Login
    • Search
    • Recent
    • Tags
    • Unread
    • Categories
    • Unreplied
    • Popular
    • GitHub
    • Docu
    • Hilfe
    1. Home
    2. Deutsch
    3. Einsteigerfragen
    4. ioBroker kaputt "gerettet"

    NEWS

    • Neuer Blog: Fotos und Eindrücke aus Solingen

    • ioBroker@Smart Living Forum Solingen, 14.06. - Agenda added

    • ioBroker goes Matter ... Matter Adapter in Stable

    ioBroker kaputt "gerettet"

    This topic has been deleted. Only users with topic management privileges can see it.
    • S
      subman82 @Thomas Braun last edited by

      @thomas-braun

      Ooooh, ich dachte immer da sich bei Putty nach der Eingabe dieses Befehls nichts getan hat, wäre es nur eine Art Befehl um SSH bzw. Putty zu starten.Wieder was gelernt, werde es nicht mehr weglassen!! Das bestimmt was root zu tun oder? (Ich kann echt garnix am PC:/)

      Ich habe somit nochmal von oben angefangen und folgende Logs:

      pi@raspberrypi:~ $ cd /opt/iobroker
      pi@raspberrypi:/opt/iobroker $ sudo -H -u iobroker npm install iobroker.js-controller
      npm WARN deprecated request@2.88.2: request has been deprecated, see https://github.com/request/request/issues/3142
      npm WARN deprecated har-validator@5.1.5: this library is no longer supported
      npm WARN deprecated request-promise-native@1.0.9: request-promise-native has been deprecated because it extends the now deprecated request package, see https://github.com/request/request/issues/3142
      npm WARN deprecated dgram@1.0.1: npm is holding this package for security reasons. As it's a core Node module, we will not transfer it over to other users. You may safely remove the package from your dependencies.
      
      > iobroker.js-controller@4.0.23 preinstall /opt/iobroker/node_modules/iobroker.js-controller
      > node lib/preinstallCheck.js
      
      NPM version: 6.14.17
      
      > usb@1.9.2 install /opt/iobroker/node_modules/@abandonware/.bluetooth-hci-socket-0H6suKAo/node_modules/usb
      > node-gyp-build
      
      make: Verzeichnis „/opt/iobroker/node_modules/@abandonware/.bluetooth-hci-socket-0H6suKAo/node_modules/usb/build“ wird betreten
        CC(target) Release/obj.target/libusb/libusb/libusb/core.o
        CC(target) Release/obj.target/libusb/libusb/libusb/descriptor.o
        CC(target) Release/obj.target/libusb/libusb/libusb/hotplug.o
        CC(target) Release/obj.target/libusb/libusb/libusb/io.o
        CC(target) Release/obj.target/libusb/libusb/libusb/strerror.o
        CC(target) Release/obj.target/libusb/libusb/libusb/sync.o
        CC(target) Release/obj.target/libusb/libusb/libusb/os/poll_posix.o
        CC(target) Release/obj.target/libusb/libusb/libusb/os/threads_posix.o
        CC(target) Release/obj.target/libusb/libusb/libusb/os/linux_usbfs.o
        CC(target) Release/obj.target/libusb/libusb/libusb/os/linux_udev.o
        AR(target) Release/obj.target/usb.a
        COPY Release/usb.a
        CXX(target) Release/obj.target/usb_bindings/src/node_usb.o
      ../src/node_usb.cc: In function ‘Napi::Value SetDebugLevel(const Napi::CallbackInfo&)’:
      ../src/node_usb.cc:118:71: warning: ‘void libusb_set_debug(libusb_context*, int)’ is deprecated: Use libusb_set_option instead [-Wdeprecated-declarations]
        libusb_set_debug(usb_context, info[0].As<Napi::Number>().Int32Value());
                                                                             ^
      In file included from ../src/node_usb.h:11,
                       from ../src/node_usb.cc:1:
      ../libusb/libusb/libusb.h:1325:18: note: declared here
       void LIBUSB_CALL libusb_set_debug(libusb_context *ctx, int level);
                        ^~~~~~~~~~~~~~~~
      ../src/node_usb.cc:118:71: warning: ‘void libusb_set_debug(libusb_context*, int)’ is deprecated: Use libusb_set_option instead [-Wdeprecated-declarations]
        libusb_set_debug(usb_context, info[0].As<Napi::Number>().Int32Value());
                                                                             ^
      In file included from ../src/node_usb.h:11,
                       from ../src/node_usb.cc:1:
      ../libusb/libusb/libusb.h:1325:18: note: declared here
       void LIBUSB_CALL libusb_set_debug(libusb_context *ctx, int level);
                        ^~~~~~~~~~~~~~~~
        CXX(target) Release/obj.target/usb_bindings/src/device.o
        CXX(target) Release/obj.target/usb_bindings/src/transfer.o
        SOLINK_MODULE(target) Release/obj.target/usb_bindings.node
        COPY Release/usb_bindings.node
      make: Verzeichnis „/opt/iobroker/node_modules/@abandonware/.bluetooth-hci-socket-0H6suKAo/node_modules/usb/build“ wird verlassen
      
      > usb@1.9.2 install /opt/iobroker/node_modules/@abandonware/.noble-UjddDcbH/node_modules/usb
      > node-gyp-build
      
      make: Verzeichnis „/opt/iobroker/node_modules/@abandonware/.noble-UjddDcbH/node_modules/usb/build“ wird betreten
        CC(target) Release/obj.target/libusb/libusb/libusb/core.o
        CC(target) Release/obj.target/libusb/libusb/libusb/descriptor.o
        CC(target) Release/obj.target/libusb/libusb/libusb/hotplug.o
        CC(target) Release/obj.target/libusb/libusb/libusb/io.o
        CC(target) Release/obj.target/libusb/libusb/libusb/strerror.o
        CC(target) Release/obj.target/libusb/libusb/libusb/sync.o
        CC(target) Release/obj.target/libusb/libusb/libusb/os/poll_posix.o
        CC(target) Release/obj.target/libusb/libusb/libusb/os/threads_posix.o
        CC(target) Release/obj.target/libusb/libusb/libusb/os/linux_usbfs.o
        CC(target) Release/obj.target/libusb/libusb/libusb/os/linux_udev.o
        AR(target) Release/obj.target/usb.a
        COPY Release/usb.a
        CXX(target) Release/obj.target/usb_bindings/src/node_usb.o
      ../src/node_usb.cc: In function ‘Napi::Value SetDebugLevel(const Napi::CallbackInfo&)’:
      ../src/node_usb.cc:118:71: warning: ‘void libusb_set_debug(libusb_context*, int)’ is deprecated: Use libusb_set_option instead [-Wdeprecated-declarations]
        libusb_set_debug(usb_context, info[0].As<Napi::Number>().Int32Value());
                                                                             ^
      In file included from ../src/node_usb.h:11,
                       from ../src/node_usb.cc:1:
      ../libusb/libusb/libusb.h:1325:18: note: declared here
       void LIBUSB_CALL libusb_set_debug(libusb_context *ctx, int level);
                        ^~~~~~~~~~~~~~~~
      ../src/node_usb.cc:118:71: warning: ‘void libusb_set_debug(libusb_context*, int)’ is deprecated: Use libusb_set_option instead [-Wdeprecated-declarations]
        libusb_set_debug(usb_context, info[0].As<Napi::Number>().Int32Value());
                                                                             ^
      In file included from ../src/node_usb.h:11,
                       from ../src/node_usb.cc:1:
      ../libusb/libusb/libusb.h:1325:18: note: declared here
       void LIBUSB_CALL libusb_set_debug(libusb_context *ctx, int level);
                        ^~~~~~~~~~~~~~~~
        CXX(target) Release/obj.target/usb_bindings/src/device.o
        CXX(target) Release/obj.target/usb_bindings/src/transfer.o
        SOLINK_MODULE(target) Release/obj.target/usb_bindings.node
        COPY Release/usb_bindings.node
      make: Verzeichnis „/opt/iobroker/node_modules/@abandonware/.noble-UjddDcbH/node_modules/usb/build“ wird verlassen
      
      > unix-dgram@2.0.4 install /opt/iobroker/node_modules/@iobroker/.db-base-ab09iRFq/node_modules/unix-dgram
      > node-gyp rebuild
      
      make: Verzeichnis „/opt/iobroker/node_modules/@iobroker/.db-base-ab09iRFq/node_modules/unix-dgram/build“ wird betreten
        CXX(target) Release/obj.target/unix_dgram/src/unix_dgram.o
      In file included from ../../nan/nan.h:60,
                       from ../src/unix_dgram.cc:5:
      /home/iobroker/.cache/node-gyp/14.20.0/include/node/node.h:793:43: warning: cast between incompatible function types from ‘void (*)(v8::Local<v8::Object>)’ to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type]
             (node::addon_register_func) (regfunc),                          \
                                                 ^
      /home/iobroker/.cache/node-gyp/14.20.0/include/node/node.h:827:3: note: in expansion of macro ‘NODE_MODULE_X’
         NODE_MODULE_X(modname, regfunc, NULL, 0)  // NOLINT (readability/null_usage)
         ^~~~~~~~~~~~~
      ../src/unix_dgram.cc:404:1: note: in expansion of macro ‘NODE_MODULE’
       NODE_MODULE(unix_dgram, Initialize)
       ^~~~~~~~~~~
        SOLINK_MODULE(target) Release/obj.target/unix_dgram.node
        COPY Release/unix_dgram.node
      make: Verzeichnis „/opt/iobroker/node_modules/@iobroker/.db-base-ab09iRFq/node_modules/unix-dgram/build“ wird verlassen
      
      > unix-dgram@2.0.4 install /opt/iobroker/node_modules/@iobroker/.db-objects-file-ubICTaYK/node_modules/unix-dgram
      > node-gyp rebuild
      
      make: Verzeichnis „/opt/iobroker/node_modules/@iobroker/.db-objects-file-ubICTaYK/node_modules/unix-dgram/build“ wird betreten
        CXX(target) Release/obj.target/unix_dgram/src/unix_dgram.o
      In file included from ../../nan/nan.h:60,
                       from ../src/unix_dgram.cc:5:
      /home/iobroker/.cache/node-gyp/14.20.0/include/node/node.h:793:43: warning: cast between incompatible function types from ‘void (*)(v8::Local<v8::Object>)’ to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type]
             (node::addon_register_func) (regfunc),                          \
                                                 ^
      /home/iobroker/.cache/node-gyp/14.20.0/include/node/node.h:827:3: note: in expansion of macro ‘NODE_MODULE_X’
         NODE_MODULE_X(modname, regfunc, NULL, 0)  // NOLINT (readability/null_usage)
         ^~~~~~~~~~~~~
      ../src/unix_dgram.cc:404:1: note: in expansion of macro ‘NODE_MODULE’
       NODE_MODULE(unix_dgram, Initialize)
       ^~~~~~~~~~~
        SOLINK_MODULE(target) Release/obj.target/unix_dgram.node
        COPY Release/unix_dgram.node
      make: Verzeichnis „/opt/iobroker/node_modules/@iobroker/.db-objects-file-ubICTaYK/node_modules/unix-dgram/build“ wird verlassen
      
      > unix-dgram@2.0.4 install /opt/iobroker/node_modules/@iobroker/.db-objects-jsonl-G7SarE7O/node_modules/unix-dgram
      > node-gyp rebuild
      
      make: Verzeichnis „/opt/iobroker/node_modules/@iobroker/.db-objects-jsonl-G7SarE7O/node_modules/unix-dgram/build“ wird betreten
        CXX(target) Release/obj.target/unix_dgram/src/unix_dgram.o
      In file included from ../../nan/nan.h:60,
                       from ../src/unix_dgram.cc:5:
      /home/iobroker/.cache/node-gyp/14.20.0/include/node/node.h:793:43: warning: cast between incompatible function types from ‘void (*)(v8::Local<v8::Object>)’ to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type]
             (node::addon_register_func) (regfunc),                          \
                                                 ^
      /home/iobroker/.cache/node-gyp/14.20.0/include/node/node.h:827:3: note: in expansion of macro ‘NODE_MODULE_X’
         NODE_MODULE_X(modname, regfunc, NULL, 0)  // NOLINT (readability/null_usage)
         ^~~~~~~~~~~~~
      ../src/unix_dgram.cc:404:1: note: in expansion of macro ‘NODE_MODULE’
       NODE_MODULE(unix_dgram, Initialize)
       ^~~~~~~~~~~
        SOLINK_MODULE(target) Release/obj.target/unix_dgram.node
        COPY Release/unix_dgram.node
      make: Verzeichnis „/opt/iobroker/node_modules/@iobroker/.db-objects-jsonl-G7SarE7O/node_modules/unix-dgram/build“ wird verlassen
      
      > unix-dgram@2.0.4 install /opt/iobroker/node_modules/@iobroker/.db-objects-redis-c2gJ2uk7/node_modules/unix-dgram
      > node-gyp rebuild
      
      make: Verzeichnis „/opt/iobroker/node_modules/@iobroker/.db-objects-redis-c2gJ2uk7/node_modules/unix-dgram/build“ wird betreten
        CXX(target) Release/obj.target/unix_dgram/src/unix_dgram.o
      In file included from ../../nan/nan.h:60,
                       from ../src/unix_dgram.cc:5:
      /home/iobroker/.cache/node-gyp/14.20.0/include/node/node.h:793:43: warning: cast between incompatible function types from ‘void (*)(v8::Local<v8::Object>)’ to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type]
             (node::addon_register_func) (regfunc),                          \
                                                 ^
      /home/iobroker/.cache/node-gyp/14.20.0/include/node/node.h:827:3: note: in expansion of macro ‘NODE_MODULE_X’
         NODE_MODULE_X(modname, regfunc, NULL, 0)  // NOLINT (readability/null_usage)
         ^~~~~~~~~~~~~
      ../src/unix_dgram.cc:404:1: note: in expansion of macro ‘NODE_MODULE’
       NODE_MODULE(unix_dgram, Initialize)
       ^~~~~~~~~~~
        SOLINK_MODULE(target) Release/obj.target/unix_dgram.node
        COPY Release/unix_dgram.node
      make: Verzeichnis „/opt/iobroker/node_modules/@iobroker/.db-objects-redis-c2gJ2uk7/node_modules/unix-dgram/build“ wird verlassen
      
      > unix-dgram@2.0.4 install /opt/iobroker/node_modules/@iobroker/.db-states-file-b4IMGS2U/node_modules/unix-dgram
      > node-gyp rebuild
      
      make: Verzeichnis „/opt/iobroker/node_modules/@iobroker/.db-states-file-b4IMGS2U/node_modules/unix-dgram/build“ wird betreten
        CXX(target) Release/obj.target/unix_dgram/src/unix_dgram.o
      In file included from ../../nan/nan.h:60,
                       from ../src/unix_dgram.cc:5:
      /home/iobroker/.cache/node-gyp/14.20.0/include/node/node.h:793:43: warning: cast between incompatible function types from ‘void (*)(v8::Local<v8::Object>)’ to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type]
             (node::addon_register_func) (regfunc),                          \
                                                 ^
      /home/iobroker/.cache/node-gyp/14.20.0/include/node/node.h:827:3: note: in expansion of macro ‘NODE_MODULE_X’
         NODE_MODULE_X(modname, regfunc, NULL, 0)  // NOLINT (readability/null_usage)
         ^~~~~~~~~~~~~
      ../src/unix_dgram.cc:404:1: note: in expansion of macro ‘NODE_MODULE’
       NODE_MODULE(unix_dgram, Initialize)
       ^~~~~~~~~~~
        SOLINK_MODULE(target) Release/obj.target/unix_dgram.node
        COPY Release/unix_dgram.node
      make: Verzeichnis „/opt/iobroker/node_modules/@iobroker/.db-states-file-b4IMGS2U/node_modules/unix-dgram/build“ wird verlassen
      
      > unix-dgram@2.0.4 install /opt/iobroker/node_modules/@iobroker/.db-states-jsonl-u7i57pvw/node_modules/unix-dgram
      > node-gyp rebuild
      
      make: Verzeichnis „/opt/iobroker/node_modules/@iobroker/.db-states-jsonl-u7i57pvw/node_modules/unix-dgram/build“ wird betreten
        CXX(target) Release/obj.target/unix_dgram/src/unix_dgram.o
      In file included from ../../nan/nan.h:60,
                       from ../src/unix_dgram.cc:5:
      /home/iobroker/.cache/node-gyp/14.20.0/include/node/node.h:793:43: warning: cast between incompatible function types from ‘void (*)(v8::Local<v8::Object>)’ to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type]
             (node::addon_register_func) (regfunc),                          \
                                                 ^
      /home/iobroker/.cache/node-gyp/14.20.0/include/node/node.h:827:3: note: in expansion of macro ‘NODE_MODULE_X’
         NODE_MODULE_X(modname, regfunc, NULL, 0)  // NOLINT (readability/null_usage)
         ^~~~~~~~~~~~~
      ../src/unix_dgram.cc:404:1: note: in expansion of macro ‘NODE_MODULE’
       NODE_MODULE(unix_dgram, Initialize)
       ^~~~~~~~~~~
        SOLINK_MODULE(target) Release/obj.target/unix_dgram.node
        COPY Release/unix_dgram.node
      make: Verzeichnis „/opt/iobroker/node_modules/@iobroker/.db-states-jsonl-u7i57pvw/node_modules/unix-dgram/build“ wird verlassen
      
      > unix-dgram@2.0.4 install /opt/iobroker/node_modules/@iobroker/.db-states-redis-GzenCYAo/node_modules/unix-dgram
      > node-gyp rebuild
      
      make: Verzeichnis „/opt/iobroker/node_modules/@iobroker/.db-states-redis-GzenCYAo/node_modules/unix-dgram/build“ wird betreten
        CXX(target) Release/obj.target/unix_dgram/src/unix_dgram.o
      In file included from ../../nan/nan.h:60,
                       from ../src/unix_dgram.cc:5:
      /home/iobroker/.cache/node-gyp/14.20.0/include/node/node.h:793:43: warning: cast between incompatible function types from ‘void (*)(v8::Local<v8::Object>)’ to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type]
             (node::addon_register_func) (regfunc),                          \
                                                 ^
      /home/iobroker/.cache/node-gyp/14.20.0/include/node/node.h:827:3: note: in expansion of macro ‘NODE_MODULE_X’
         NODE_MODULE_X(modname, regfunc, NULL, 0)  // NOLINT (readability/null_usage)
         ^~~~~~~~~~~~~
      ../src/unix_dgram.cc:404:1: note: in expansion of macro ‘NODE_MODULE’
       NODE_MODULE(unix_dgram, Initialize)
       ^~~~~~~~~~~
        SOLINK_MODULE(target) Release/obj.target/unix_dgram.node
        COPY Release/unix_dgram.node
      make: Verzeichnis „/opt/iobroker/node_modules/@iobroker/.db-states-redis-GzenCYAo/node_modules/unix-dgram/build“ wird verlassen
      
      > unix-dgram@2.0.4 install /opt/iobroker/node_modules/@iobroker/.js-controller-adapter-KzcGIgOj/node_modules/unix-dgram
      > node-gyp rebuild
      
      make: Verzeichnis „/opt/iobroker/node_modules/@iobroker/.js-controller-adapter-KzcGIgOj/node_modules/unix-dgram/build“ wird betreten
        CXX(target) Release/obj.target/unix_dgram/src/unix_dgram.o
      In file included from ../../nan/nan.h:60,
                       from ../src/unix_dgram.cc:5:
      /home/iobroker/.cache/node-gyp/14.20.0/include/node/node.h:793:43: warning: cast between incompatible function types from ‘void (*)(v8::Local<v8::Object>)’ to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type]
             (node::addon_register_func) (regfunc),                          \
                                                 ^
      
      .....................
      
      + iobroker.js-controller@4.0.23
      added 1112 packages from 283 contributors, removed 9 packages and updated 245 packages in 758.546s
      
      50 packages are looking for funding
        run `npm fund` for details
      
      pi@raspberrypi:/opt/iobroker $ iobroker status
      iobroker is running on this host.
      
      
      Objects type: jsonl
      States  type: jsonl
      pi@raspberrypi:/opt/iobroker $ iobroker list instances
       Cannot determine Set feature status: Connection is closed.
       Unable to subscribe to evicted Keyspace events from Redis Server: Connection is closed.
       Unable to subscribe to meta namespace "meta." changes: Connection is closed.
      Server Cannot start inMem-states on port 9000: Failed to lock DB file "/opt/iobroker/iobroker-data/states.jsonl"!
      
      

      Musste Log abkürzen ,da eine Fehlermeldung beim Absenden auftrat (Payload too large) Ich hoffe du kannst trotzdem etwas damit anfangen.

      Es hat sich durch hinzufügen des ersten Schrittes (1. cd /opt/iobroker) auf jedenfall etwas geändert...ich komme wieder auf die Benutzeroberfläche:))
      Die Instanzen sind noch alle da aber auf rot.

      mikeal created this issue in request/request

      open Request’s Past, Present and Future #3142

      mikeal created this issue in request/request

      open Request’s Past, Present and Future #3142

      J 1 Reply Last reply Reply Quote 0
      • J
        Jan1 @subman82 last edited by

        @subman82 sagte in ioBroker kaputt "gerettet":

        Wieder was gelernt

        Dann gleich noch was, Putty ist lediglich ein Tool um z.B. eine Konsole für ein SSH Verbindung zu öffnen, nicht mehr und nicht weniger 😉

        S 1 Reply Last reply Reply Quote 0
        • S
          subman82 @Jan1 last edited by

          @jan1 Viel lernen ich noch muss 😕

          Ich danke euch auf jeden Fall, insbesondere für die Geduld 🙄

          Thomas Braun J 2 Replies Last reply Reply Quote 0
          • Thomas Braun
            Thomas Braun Most Active @subman82 last edited by

            @subman82

            cd = Change Directory

            Starte die Kiste mal komplett durch.

            iobroker stop
            sudo reboot
            
            1 Reply Last reply Reply Quote 0
            • J
              Jan1 @subman82 last edited by

              @subman82
              Thomas hat ein Gedulds Abo, also der gibt so schnell nicht auf 😉
              Was Linux betrifft, hat er schon jeden hier bekehrt und auf den rechten Pfad geführt, inklusive meiner Wenigkeit.

              S 1 Reply Last reply Reply Quote 0
              • S
                subman82 @Jan1 last edited by

                @jan1 Ich muss jetzt Familienprogramm launchen und gucke später hier weiter 😬
                Besten Dank erstmal Jungs!!!!

                S 1 Reply Last reply Reply Quote 0
                • S
                  subman82 @subman82 last edited by

                  @subman82

                  Wir sind jetzt zurück und in der Zwischenzeit sind die meistens Instanzen auf grün gewechselt. Die brauchten wohl nach dem Neustart einfach etwas Zeit.
                  Die Harmony und die Zigbee Instanz stehen noch auf rot. Mal gucken wie ich das noch beseitigt bekomme aber da der Rest erst mal läuft bin ich mehr als glücklich und dankbar!!!
                  Lieben Dank nochmal,insbesondere an Thomas!!

                  Thomas Braun J 2 Replies Last reply Reply Quote 0
                  • Thomas Braun
                    Thomas Braun Most Active @subman82 last edited by

                    @subman82 sagte in ioBroker kaputt "gerettet":

                    Die brauchten wohl nach dem Neustart einfach etwas Zeit.

                    Die müssen nach dem 'Backup-Bauplan' zuerst mal gebaut werden.
                    Das dauert halt.
                    Der zigbee kann da auch schon mal etwas zickbee werden.
                    Schau dir dessen Neustart mal im LogFile an.

                    1 Reply Last reply Reply Quote 0
                    • J
                      Jan1 @subman82 last edited by

                      @subman82
                      Wenn alle anderen grün werden und nur Harmony und Zigbee nicht, dann hast beim Harmony wohl ne falsche, oder überhaupt ein IP eingetragen. Bei einem Hub muss nichts gemacht werden. Zigbee dauert unter Umständen wirklich sehr lange, bringt aber bei Fehlern auch ein sehr brauchbares Log.

                      S 1 Reply Last reply Reply Quote 0
                      • S
                        subman82 @Jan1 last edited by

                        @jan1

                        bei der Harmony ist die richtige IP hinterlegt,gerade nochmal abgeglichen. Mehr kann man da wirklich nicht eintragen.
                        Hab den Hub und dann die Instanz neugestartet, jetzt ist sie auch grün,JUHU:)

                        bei zigbee steht einiges, da geh ich aber ein andermal dran...

                        2022-09-11 18:45:55.181	error	instance system.adapter.zigbee.0 terminated with code 1 (JS_CONTROLLER_STOPPED)
                        host.raspberrypi
                        	2022-09-11 18:45:55.180	error	Caught by controller[0]: }
                        host.raspberrypi
                        	2022-09-11 18:45:55.180	error	Caught by controller[0]: ]
                        host.raspberrypi
                        	2022-09-11 18:45:55.180	error	Caught by controller[0]: '/opt/iobroker/node_modules/iobroker.zigbee/main.js'
                        host.raspberrypi
                        	2022-09-11 18:45:55.180	error	Caught by controller[0]: '/opt/iobroker/node_modules/iobroker.zigbee/lib/commands.js',
                        host.raspberrypi
                        	2022-09-11 18:45:55.179	error	Caught by controller[0]: '/opt/iobroker/node_modules/iobroker.zigbee/lib/utils.js',
                        host.raspberrypi
                        	2022-09-11 18:45:55.179	error	Caught by controller[0]: '/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman-converters/index.js',
                        host.raspberrypi
                        	2022-09-11 18:45:55.176	error	Caught by controller[0]: '/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman-converters/devices/danfoss.js',
                        host.raspberrypi
                        	2022-09-11 18:45:55.176	error	Caught by controller[0]: '/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman-converters/lib/ota/index.js',
                        host.raspberrypi
                        	2022-09-11 18:45:55.175	error	Caught by controller[0]: '/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman-converters/lib/ota/securifi.js',
                        host.raspberrypi
                        	2022-09-11 18:45:55.175	error	Caught by controller[0]: '/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman-converters/lib/ota/zigbeeOTA.js',
                        host.raspberrypi
                        	2022-09-11 18:45:55.175	error	Caught by controller[0]: requireStack: [
                        host.raspberrypi
                        	2022-09-11 18:45:55.175	error	Caught by controller[0]: code: 'MODULE_NOT_FOUND',
                        host.raspberrypi
                        	2022-09-11 18:45:55.175	error	Caught by controller[0]: at Module.require (internal/modules/cjs/loader.js:974:19) {
                        host.raspberrypi
                        	2022-09-11 18:45:55.174	error	Caught by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:790:12)
                        host.raspberrypi
                        	2022-09-11 18:45:55.174	error	Caught by controller[0]: at Module.load (internal/modules/cjs/loader.js:950:32)
                        host.raspberrypi
                        	2022-09-11 18:45:55.174	error	Caught by controller[0]: at Object.Module._extensions..js (internal/modules/cjs/loader.js:1114:10)
                        host.raspberrypi
                        	2022-09-11 18:45:55.174	error	Caught by controller[0]: at Module._compile (internal/modules/cjs/loader.js:1085:14)
                        host.raspberrypi
                        	2022-09-11 18:45:55.174	error	Caught by controller[0]: at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman-converters/lib/ota/zigbeeOTA.js:5:13)
                        host.raspberrypi
                        	2022-09-11 18:45:55.173	error	Caught by controller[0]: at require (internal/modules/cjs/helpers.js:101:18)
                        host.raspberrypi
                        	2022-09-11 18:45:55.173	error	Caught by controller[0]: at Module.require (internal/modules/cjs/loader.js:974:19)
                        host.raspberrypi
                        	2022-09-11 18:45:55.173	error	Caught by controller[0]: at Function.Module._load (internal/modules/cjs/loader.js:746:27)
                        host.raspberrypi
                        	2022-09-11 18:45:55.173	error	Caught by controller[0]: at Function.Module._resolveFilename (internal/modules/cjs/loader.js:902:15)
                        host.raspberrypi
                        	2022-09-11 18:45:55.172	error	Caught by controller[0]: - /opt/iobroker/node_modules/iobroker.zigbee/main.js
                        host.raspberrypi
                        	2022-09-11 18:45:55.172	error	Caught by controller[0]: - /opt/iobroker/node_modules/iobroker.zigbee/lib/commands.js
                        host.raspberrypi
                        	2022-09-11 18:45:55.172	error	Caught by controller[0]: - /opt/iobroker/node_modules/iobroker.zigbee/lib/utils.js
                        host.raspberrypi
                        	2022-09-11 18:45:55.172	error	Caught by controller[0]: - /opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman-converters/index.js
                        host.raspberrypi
                        	2022-09-11 18:45:55.172	error	Caught by controller[0]: - /opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman-converters/devices/danfoss.js
                        host.raspberrypi
                        	2022-09-11 18:45:55.171	error	Caught by controller[0]: - /opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman-converters/lib/ota/index.js
                        host.raspberrypi
                        	2022-09-11 18:45:55.171	error	Caught by controller[0]: - /opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman-converters/lib/ota/securifi.js
                        host.raspberrypi
                        	2022-09-11 18:45:55.171	error	Caught by controller[0]: - /opt/iobroker/node_modules/iobroker.zigbee/node_modules/zigbee-herdsman-converters/lib/ota/zigbeeOTA.js
                        host.raspberrypi
                        	2022-09-11 18:45:55.170	error	Caught by controller[0]: Require stack:
                        host.raspberrypi
                        	2022-09-11 18:45:55.170	error	Caught by controller[0]: Error: Cannot find module 'uri-js'
                        host.raspberrypi
                        	2022-09-11 18:45:55.170	error	Caught by controller[0]: ^
                        host.raspberrypi
                        	2022-09-11 18:45:55.169	error	Caught by controller[0]: throw err;
                        host.raspberrypi
                        	2022-09-11 18:45:55.169	error	Caught by controller[0]: internal/modules/cjs/loader.js:905
                        

                        Schönen Sonntag noch!

                        J 1 Reply Last reply Reply Quote 0
                        • J
                          Jan1 @subman82 last edited by

                          @subman82
                          Wenn nur ein Harmony Hub vorhanden, dann brauchst eben auch gar keine IP eintragen, da dann automatisch der verfügbare Hub genommen wird, wenn das Subnetzt passt 😉

                          Wobei beim Zigbee fehlt wohl das Modul uri-js, somit könnte beim Harmony auch was anderes der Grund für den roten Status sein.

                          Thomas Braun 1 Reply Last reply Reply Quote 0
                          • Thomas Braun
                            Thomas Braun Most Active @Jan1 last edited by

                            @jan1 sagte in ioBroker kaputt "gerettet":

                            uri-js

                            Das Modul hab ich aber nicht im zigbee-Adapter drin sondern im backitup:

                            echad@chet:/opt/iobroker $ npm ls uri-js
                            iobroker.inst@3.0.0 /opt/iobroker
                            └─┬ iobroker.backitup@2.4.12
                              └─┬ request@2.88.2
                                └─┬ har-validator@5.1.5
                                  └─┬ ajv@6.12.6
                                    └── uri-js@4.4.1
                            

                            Da scheint mir doch eher dort was im Argen zu liegen.

                            J 1 Reply Last reply Reply Quote 0
                            • J
                              Jan1 @Thomas Braun last edited by

                              @thomas-braun
                              In der Tat etwas seltsam, wobei der Rest ja nach dem Restor läuft. Ist die Frage ob der Restor mit dem Backitup gemacht wurde, oder manuell.

                              S 1 Reply Last reply Reply Quote 0
                              • S
                                subman82 @Jan1 last edited by

                                @jan1

                                Hallo ihr beiden,

                                Zum hub, ich hab zwei , darum hab ich die ip drin.

                                Zum Backup.
                                Ich hab backitup heruntergeladen weil ich das Backup auf dem Laptop speichern wollte aber als da auf Anhieb nicht gesehen hatte wie das geht und mir die Zeit fehlte hab ich das Backup nur über putty gemacht auf dem raspberry gemacht.

                                Den Zugriff auf die Benutzeroberfläche hab ich durch Thomas seinen Befehl

                                cd /opt/iobroker
                                sudo -H -u iobroker npm install iobroker.js-controller
                                
                                

                                hinbekommen. Mehr hab ich dann nicht mehr gemacht bisher , weil nach und nach alle Instanzen bis auf zigbee grün wurden.

                                J 1 Reply Last reply Reply Quote 0
                                • J
                                  Jan1 @subman82 last edited by Jan1

                                  @subman82
                                  Das erklärt warum der Restor lief, obwohl dem Backitup Adapter ein Modul fehlt.
                                  Dann hast über Putty ne SSH Verbindung hergestellt, denn mit Putty kannst kein Restor machen, das ist ein simples Tool um Verbindungen aller Art zu speichern und dann per Klick zu öffnen, mehr macht Putty nicht 😉

                                  Also Du hast ein aktuelles Backup? Wenn ja, dann würde ich das jetzt noch mal sauber restoren und zwar komplett frisch. Sprich den Ordner IOBroker löschen, am besten Node gleich mit (steht in der Anleitung wie das geht). Dann IObroker installieren, den das bringt die geforderte Node und den Backitup Adapter gleich mit. Dann das Backup in den Backups Order kopieren und im Backitup Adapter unter lokal das Backu restoren. Wenn danach was nicht läuft, hatst ein Problem in der Debian Installation, oder das Backup ist defekt (hatte ich noch nie).

                                  Wie hattest denn das Backup überhaupt erzeugt, mit dem Adapter?

                                  S 1 Reply Last reply Reply Quote 0
                                  • S
                                    subman82 @Jan1 last edited by

                                    @jan1 Ich hatte nur über putty den Befehl „Iobroker Backup“eingetippt. Also nicht über den Adapter.

                                    Ich bin eigentlich froh, dass es läuft wie es läuft. Ich glaub über zigbee hatte ich eh nix mehr verbunden.

                                    Ansonsten hast du ja geschrieben wie ich es neu aufsetzen könnte. Das lese ich mir nochmal in Ruhe durch und Versuch es mal an einem Wochenenden.

                                    Ich muss wohl generell mal mehr Basics anlernen, versteh nur die Hälfte von dem was du geschrieben hast mit ssh und putty. Ich weis nicht mal wie ich mir die Ordner auf dem Raspberry auf dem Laptop anzeigen lassen kann, wo alles abgespeichert wird.
                                    Hab es am Wochenende mit einem Desktop Remote Programm versucht aber am Ende sah es als hätte ich putty auf. Konsole nennt sich das dann?ssh? 🤦 😖 keine Ahnung

                                    J 1 Reply Last reply Reply Quote 0
                                    • J
                                      Jan1 @subman82 last edited by Jan1

                                      @subman82
                                      Wenn Du die Ordner am PC sehen willst, nimmst z.B. Filezilla als FTP Client. So kannst ganz einfach per Maus Dateien wie das Backup in den dafür vorgesehenen Ordner schieben.

                                      Desktop Remote, da wird Dir gleich Thomas die Hosen stramm ziehen. Auf einem Server hat eine graphische Oberfläche nicht wirklich was verloren, da wird normal alles über die Konsole erledigt.

                                      S 1 Reply Last reply Reply Quote 0
                                      • S
                                        subman82 @Jan1 last edited by

                                        @Jan1

                                        Ich wollt halt immer einen pc aber hab nur einen Gameboy bekommen, jetzt haben wir den Salat 😊

                                        Ich probiere es auf jeden Fall mal aus.

                                        1 Reply Last reply Reply Quote 0
                                        • Dr. Bakterius
                                          Dr. Bakterius Most Active @subman82 last edited by

                                          @subman82 sagte in ioBroker kaputt "gerettet":

                                          Ich habe das System damals über Ebay fertig gekauft und dann nur die notwendigen Adaptern selber installiert

                                          Schon deswegen würde ich das System von Grund auf neu aufsetzen!

                                          J 1 Reply Last reply Reply Quote 1
                                          • J
                                            Jan1 @Dr. Bakterius last edited by

                                            @dr-bakterius
                                            Eigentlich ist das wirklich die beste Idee 😉

                                            S 1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post

                                            Support us

                                            ioBroker
                                            Community Adapters
                                            Donate

                                            519
                                            Online

                                            31.9k
                                            Users

                                            80.1k
                                            Topics

                                            1.3m
                                            Posts

                                            7
                                            66
                                            3566
                                            Loading More Posts
                                            • Oldest to Newest
                                            • Newest to Oldest
                                            • Most Votes
                                            Reply
                                            • Reply as topic
                                            Log in to reply
                                            Community
                                            Impressum | Datenschutz-Bestimmungen | Nutzungsbedingungen
                                            The ioBroker Community 2014-2023
                                            logo