Blink Camera System

Soukai

@pischleuder Hey, ja den code habe ich schon ausgeführt.
trotzallem erstellt er mir wie gesagt bloss ein bild in der konsole nicht jedoch per blockly

hier mal noch mein pyton script vielleicht findet sich da was
die letzten Zeilen habe ich auskommentiert, da sie auch nicht bei mir funktionieren....

#!/usr/bin/python3
import requests

from blinkpy.blinkpy import Blink
from blinkpy.auth import Auth

blink = Blink()
# Can set no_prompt when initializing auth handler
auth = Auth({"username": 'xxxxxx', "password": 'xxxxx'}, no_prompt=True)
blink.auth = auth
blink.start()
auth.send_auth_key(blink, "xxxx")
blink.setup_post_verify()

###### hier den Dateinamen/Pfad eintragen, den das snapshot Bild erhalten soll - bei mir Flur und Garten Kamera  #####

bild = '/home/saeko/blink/bilder/haustuer_oben.jpg'
for name, camera in blink.cameras.items(): print(name), print(camera.attributes)

#### hier Eure Kamera 1 eintragen und weitere Einträge für mehr Kameras vornehmen ####

camera = blink.cameras['Haustür']
camera.snap_picture()
blink.refresh()
camera.image_to_file(bild)

#payload = {'value':bild}
#r = requests.get("http://192.168.178.92:8081/set/0_userdata.0.snapcamera1", params=payload)

Pischleuder

@soukai

nimm mal das python3 in dem exec Befehl heraus.

Soukai

@pischleuder schon versucht.

versucht wurde
sudo python3 path, python path, python3.8 path, python 3.9 path
ohne sudo
/home/saeko/blinkpy/bilder.py
home/saeko/blinkpy/bilder.py
./home/saeko/blinkpy/bilder.py

Alles will nicht

edit: Pfadänderung des snapshots in den blinkpy ordner bringt auch nichts

Pischleuder

@soukai

zeig doch einmal, welchem User Dein script zugeordnet ist.

Bei mir so im Verzeichnis /opt/iobroker:

ls -l ./blink-cameraflur.py 
-rwxrwxrwx+ 1 pi pi 1372 Apr 16 11:01 ./blink-cameraflur.py

Soukai

@pischleuder danke für deine Zeit!


saeko@raspberrypi:~/blinkpy $ ls -l ./bild.py
-rwxrwxrwx 1 saeko saeko 922 Jun  9 17:38 ./bild.py

habs auch versucht den Umlaut im script zu streichen, ohne erfolg

Pischleuder

@soukai

dann weiß ich erst einmal nicht weiter - bin auch gerade im Urlaub. Kann mich dazu erst Mitte nächster Woche melden.

Soukai

@pischleuder Geht klar! Danke!


saeko@raspberrypi:~/blinkpy $ sudo -u iobroker python3 /home/saeko/blinkpy/bild.py
Could not extract camera info: {'message': 'Camera not found', 'code': 500}
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown
Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable
Could not extract camera info: None
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown
Traceback (most recent call last):
  File "/home/saeko/blinkpy/bild.py", line 27, in <module>
    camera.image_to_file(bild)
  File "/home/saeko/blinkpy/blinkpy/camera.py", line 241, in image_to_file
    with open(path, "wb") as imgfile:
PermissionError: [Errno 13] Permission denied: '/home/saeko/blinkpy/haustuer.jpg'
saeko@raspberrypi:~/blinkpy $ sudo -u iobroker sudo python3 /home/saeko/blinkpy/bild.py
[sudo] password for iobroker:
Could not extract camera info: {'message': 'Camera not found', 'code': 500}
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown
Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable
Could not extract camera info: None
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown

um den script per iobroker starten zu können, brauch ich sudo, falls das was aussagt. Die anderen Fehlermeldungen kommen vermutlich von der Blink Doorbell, die wohl noch nicht integriert wurde.

Förster

@speridal sagte in Blink Camera System:

Ich habe daraufhin das Modul in Version 3.7.6 installiert (Checkbox setzen für Aktualisierung beim nächsten Start) und jetzt funktioniert alles.

Gruß,
Bernd

@speridal Ich stehe vor der selben Herausforderung ... Wie installiert man denn diese "ältere" Version ? Immer wenn ich homebridge-blink-for-home eingebe, installiert er mir ja die neueste Version 3.9.1

Soukai

@förster Indem du "homebridge-blink-for-home@3.7.6" als modul eingibst
wie hier zb. gezeigt:

Soukai

@pischleuder Möchte nicht aufdringlich wirken, aber hätten sie wieder zeit?

Pischleuder

@soukai

Hi,

versuche doch bitte einmal Dein script in den /opt/iobroker Ordner zu kopieren und starte das
in der Konsole normal, also ohne sudo und poste das Ergebnis.

Soukai

@pischleuder Hey,
inzwischen dies hier, aber wahrscheinlich wegen der neuen blink doorbell. bild2 ist ohne json credentials. 1 mit. Ist aber der gleiche text wie im blinkpy ordner

saeko@raspberrypi:/opt/iobroker $ python bild2.py
Could not extract camera info: {'message': 'Camera not found', 'code': 500}
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown
Did not receive valid response from server.
Could not extract camera info: {'message': 'Camera not found', 'code': 500}
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown
Haustür
{'name': 'Haustür', 'camera_id': '68316', 'serial': 'G8T1GJ0003118F0H', 'temperature': 69, 'temperature_c': 20.6, 'temperature_calibrated': 69, 'battery': 'ok', 'battery_voltage': 168, 'thumbnail': 'https://rest-e004.immedia-semi.com/api/v3/media/accounts/62195/networks/66328/catalina/68316/thumbnail/thumbnail.jpg?ts=1655932081&ext=', 'video': None, 'motion_enabled': True, 'motion_detected': False, 'wifi_strength': -70, 'network_id': 66328, 'sync_module': 'Zuhause', 'last_record': None, 'type': 'catalina'}
Türklingel
{'name': 'unknown', 'camera_id': 'unknown', 'serial': None, 'temperature': None, 'temperature_c': None, 'temperature_calibrated': None, 'battery': None, 'battery_voltage': None, 'thumbnail': None, 'video': None, 'motion_enabled': 'unknown', 'motion_detected': False, 'wifi_strength': None, 'network_id': 66328, 'sync_module': 'Zuhause', 'last_record': None, 'type': None}
Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable
Could not extract camera info: None
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown
saeko@raspberrypi:/opt/iobroker $ python bild.py
Could not extract camera info: {'message': 'Camera not found', 'code': 500}
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown
Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable
Could not extract camera info: None
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown
saeko@raspberrypi:/opt/iobroker $

saeko@raspberrypi:~/blinkpy $ saeko@raspberrypi:~/blinkpy $ python bild.py
Could not extract camera info: {'message': 'Camera not found', 'code': 500}
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown
Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable
Could not extract camera info: None
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown
saeko@raspberrypi:~/blinkpy $ python bild2.py
python3.8: can't open file 'bild2.py': [Errno 2] No such file or directory
saeko@raspberrypi:~/blinkpy $ python bild2.py
Could not extract camera info: {'message': 'Camera not found', 'code': 500}
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown
Did not receive valid response from server.
Could not extract camera info: {'message': 'Camera not found', 'code': 500}
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown
Haustür
{'name': 'Haustür', 'camera_id': '68316', 'serial': 'G8T1GJ0003118F0H', 'temperature': 69, 'temperature_c': 20.6, 'temperature_calibrated': 69, 'battery': 'ok', 'battery_voltage': 168, 'thumbnail': 'https://rest-e004.immedia-semi.com/api/v3/media/accounts/62195/networks/66328/catalina/68316/thumbnail/thumbnail.jpg?ts=1655932467&ext=', 'video': None, 'motion_enabled': True, 'motion_detected': False, 'wifi_strength': -70, 'network_id': 66328, 'sync_module': 'Zuhause', 'last_record': None, 'type': 'catalina'}
Türklingel
{'name': 'unknown', 'camera_id': 'unknown', 'serial': None, 'temperature': None, 'temperature_c': None, 'temperature_calibrated': None, 'battery': None, 'battery_voltage': None, 'thumbnail': None, 'video': None, 'motion_enabled': 'unknown', 'motion_detected': False, 'wifi_strength': None, 'network_id': 66328, 'sync_module': 'Zuhause', 'last_record': None, 'type': None}
Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable
Could not extract camera info: None
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown

Pischleuder

@soukai

der Aufruf mit python vorab ist falsch, da das im script bereits definiert ist. Das script muss lokal (in /opt/iobroker) so ausgeführt werden:

./bild.py

Ausserdem fehlt in Deinem script etwas:

from blinkpy.camera import BlinkCamera

Ansonsten muss es sich um ein Rechteproblem des scriptes handeln, oder Du hast blink nicht für den user iobroker richtig installiert, da es mit sudo ja funktioniert. Dieses Problem hatte ich ja auch, wie in Deinem oben genannten Link erwähnt.
Also vergewissere Dich bitte, ob Du das bereits gemacht hast (aus dem blink git Ordner):

als normaler user saeko
pip3 install blinkpy

mit sudo
sudo -H -u iobroker pip3 install blinkpy

Soukai

@pischleuder said in Blink Camera System:

@soukai

der Aufruf mit python vorab ist falsch, da das im script bereits definiert ist. Das script muss lokal (in /opt/iobroker) so ausgeführt werden:
./bild.py

Habe folgendes probiert (mit python und ohne) und es hat sich leider nichts geändert:

Ausserdem fehlt in Deinem script etwas:
from blinkpy.camera import BlinkCamera

Zeile wurde jetzt eingefügt.

mein script bis jetzt:

#!/usr/bin/python3
import requests

from blinkpy.blinkpy import Blink
from blinkpy.auth import Auth
from blinkpy.helpers.util import json_load
from blinkpy.camera import BlinkCamera

blink = Blink()
auth = Auth(json_load("/home/saeko/blink/cred.json"))
blink.auth = auth
blink.start()

#auth.send_auth_key(blink, "x")
#blink.setup_post_verify()

###### hier den Dateinamen/Pfad eintragen, den das snapshot Bild erhalten soll >

bild = './haustuer.jpg'
#bild2 = '/home/saeko/blinkpy/Tuerklingel.jpg'
#for name, camera in blink.cameras.items(): print(name), print(camera.attribute>

#### hier Eure Kamera 1 eintragen und weitere Einträge für mehr Kameras vornehm>

camera = blink.cameras['Haustür']
camera.snap_picture()
blink.refresh()
camera.image_to_file(bild)

#payload = {'value':bild}
#r = requests.get("http://192.168.178.92:8081/set/0_userdata.0.snapcamera1", pa>

#### hier Eure Kamera 2 eintragen und weitere Einträge für mehr Kameras vornehm>

#camera = blink.cameras['Türklingel']
#camera.snap_picture()
#blink.refresh()
#camera.image_to_file(bild2)

#payload = {'value':bild}
#r = requests.get("http://192.168.178.92:8081/set/0_userdata.0.snapcamera1", pa>

Ansonsten muss es sich um ein Rechteproblem des scriptes handeln, oder Du hast blink nicht für den user iobroker richtig installiert, da es mit sudo ja funktioniert. Dieses Problem hatte ich ja auch, wie in Deinem oben genannten Link erwähnt.
Also vergewissere Dich bitte, ob Du das bereits gemacht hast (aus dem blink git Ordner):

als normaler user saeko
pip3 install blinkpy

mit sudo
sudo -H -u iobroker pip3 install blinkpy

Hatte dies schon installiert, leider auch keine Änderung

saeko@raspberrypi:~/blinkpy $ pip3 install blinkpy
Defaulting to user installation because normal site-packages is not writeable
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Requirement already satisfied: blinkpy in /home/saeko/.local/lib/python3.8/site-packages (0.20.0.dev0)
Requirement already satisfied: requests>=2.24.0 in /home/saeko/.local/lib/python3.8/site-packages (from blinkpy) (2.27.1)
Requirement already satisfied: python-dateutil>=2.8.1 in /home/saeko/.local/lib/python3.8/site-packages (from blinkpy) (2.8.2)
Requirement already satisfied: python-slugify>=4.0.1 in /home/saeko/.local/lib/python3.8/site-packages (from blinkpy) (6.1.2)
Requirement already satisfied: six>=1.5 in /home/saeko/.local/lib/python3.8/site-packages (from python-dateutil>=2.8.1->blinkpy) (1.16.0)
Requirement already satisfied: text-unidecode>=1.3 in /home/saeko/.local/lib/python3.8/site-packages (from python-slugify>=4.0.1->blinkpy) (1.3)
Requirement already satisfied: urllib3<1.27,>=1.21.1 in /home/saeko/.local/lib/python3.8/site-packages (from requests>=2.24.0->blinkpy) (1.26.9)
Requirement already satisfied: idna<4,>=2.5 in /home/saeko/.local/lib/python3.8/site-packages (from requests>=2.24.0->blinkpy) (3.3)
Requirement already satisfied: charset-normalizer~=2.0.0 in /home/saeko/.local/lib/python3.8/site-packages (from requests>=2.24.0->blinkpy) (2.0.12)
Requirement already satisfied: certifi>=2017.4.17 in /home/saeko/.local/lib/python3.8/site-packages (from requests>=2.24.0->blinkpy) (2022.5.18.1)
saeko@raspberrypi:~/blinkpy $ sudo -H -u iobroker pip3 install blinkpy
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Requirement already satisfied: blinkpy in /usr/local/lib/python3.9/dist-packages (0.20.0.dev0)
Requirement already satisfied: requests>=2.24.0 in /usr/local/lib/python3.9/dist-packages (from blinkpy) (2.27.1)
Requirement already satisfied: python-slugify>=4.0.1 in /usr/local/lib/python3.9/dist-packages (from blinkpy) (4.0.1)
Requirement already satisfied: python-dateutil>=2.8.1 in /usr/local/lib/python3.9/dist-packages (from blinkpy) (2.8.2)
Requirement already satisfied: six>=1.5 in /usr/lib/python3/dist-packages (from python-dateutil>=2.8.1->blinkpy) (1.16.0)
Requirement already satisfied: text-unidecode>=1.3 in /usr/local/lib/python3.9/dist-packages (from python-slugify>=4.0.1->blinkpy) (1.3)
Requirement already satisfied: idna<4,>=2.5 in /usr/lib/python3/dist-packages (from requests>=2.24.0->blinkpy) (2.10)
Requirement already satisfied: charset-normalizer~=2.0.0 in /usr/local/lib/python3.9/dist-packages (from requests>=2.24.0->blinkpy) (2.0.12)
Requirement already satisfied: urllib3<1.27,>=1.21.1 in /usr/local/lib/python3.9/dist-packages (from requests>=2.24.0->blinkpy) (1.25.11)
Requirement already satisfied: certifi>=2017.4.17 in /usr/lib/python3/dist-packages (from requests>=2.24.0->blinkpy) (2020.6.20)
saeko@raspberrypi:~/blinkpy $

Normaler aufruf per Konsole:

saeko@raspberrypi:/opt/iobroker $ python bild.py
Could not extract camera info: {'message': 'Camera not found', 'code': 500}
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown
Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable
Could not extract camera info: None
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown

Per iobroker aufruf sudo -u iobroker python3 ./bild.py kommt nun folgendes:

saeko@raspberrypi:/opt/iobroker $ sudo -u iobroker python3 ./bild.py
Traceback (most recent call last):
  File "/opt/iobroker/./bild.py", line 4, in <module>
    from blinkpy.blinkpy import Blink
ModuleNotFoundError: No module named 'blinkpy'

Pischleuder

@soukai

Jep, du rufst das script mit dem json parameter auf und das wird nicht akzeptiert

Warum?
Was steht da drin ? --> Username und Passwort ?

Soukai

@pischleuder
meinst du

auth = Auth(json_load("/home/saeko/blink/cred.json"))

da stehen die Kontodaten drin. Ich probiers mal ohne. sollte sich aber eigentlich nichts ändern

Was steht da drin ? --> Username und Passwort ?

japp

Pischleuder

@soukai sagte in Blink Camera System:

Per iobroker aufruf sudo -u iobroker python3 ./bild.py kommt nun folgendes:

saeko@raspberrypi:/opt/iobroker $ sudo -u iobroker python3 ./bild.py
Traceback (most recent call last):
  File "/opt/iobroker/./bild.py", line 4, in <module>
    from blinkpy.blinkpy import Blink
ModuleNotFoundError: No module named 'blinkpy'

Wie gesagt, das ist komplett falsch und Du solltest das aus Deinen Gedanken streichen

Pischleuder

Normaler aufruf per Konsole:

saeko@raspberrypi:/opt/iobroker $ python bild.py
Could not extract camera info: {'message': 'Camera not found', 'code': 500}
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown
Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable
Could not extract camera info: None
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown

Dieser Aufruf wird nur mit ./bild.py gemacht, weil die Definition bereits für python im script ist und zwar mit

#!/usr/bin/python3

Pischleuder

@pischleuder

ggf. einmal dieses script erstellen und laufen lassen:

#!/usr/bin/python3

###### zuerst ein pip3 install request ausführen, wenn nicht bereits installiert #####
import requests
import time
#from pushover import init, Client
from blinkpy.blinkpy import Blink
from blinkpy.auth import Auth
from blinkpy.camera import BlinkCamera
blink = Blink()
auth = Auth({"username": "E-Mail", "password": "Passwort"}, no_prompt=True)
blink.auth = auth
blink.start()
auth.send_auth_key(blink, "hier blink key")
blink.setup_post_verify()
for name, camera in blink.cameras.items(): print(name), print(camera.attributes)

Nicht das bei den / der Kamera was nicht stimmt.

Soukai

@pischleuder said in Blink Camera System:

@pischleuder

ggf. einmal dieses script erstellen und laufen lassen:

#!/usr/bin/python3

###### zuerst ein pip3 install request ausführen, wenn nicht bereits installiert #####
import requests
import time
#from pushover import init, Client
from blinkpy.blinkpy import Blink
from blinkpy.auth import Auth
from blinkpy.camera import BlinkCamera
blink = Blink()
auth = Auth({"username": "E-Mail", "password": "Passwort"}, no_prompt=True)
blink.auth = auth
blink.start()
auth.send_auth_key(blink, "hier blink key")
blink.setup_post_verify()
for name, camera in blink.cameras.items(): print(name), print(camera.attributes)

Nicht das bei den / der Kamera was nicht stimmt.

Das kam dabei raus:

saeko@raspberrypi:/opt/iobroker $ python bildneu.py
Could not extract camera info: {'message': 'Camera not found', 'code': 500}
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown
Did not receive valid response from server.
Could not extract camera info: {'message': 'Camera not found', 'code': 500}
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown
Haustür
{'name': 'Haustür', 'camera_id': '68316', 'serial': 'G8T1GJ0003118F0H', 'temperature': 102, 'temperature_c': 38.9, 'temperature_calibrated': 102, 'battery': 'ok', 'battery_voltage': 168, 'thumbnail': 'https://rest-e004.immedia-semi.com/api/v3/media/accounts/62195/networks/66328/catalina/68316/thumbnail/thumbnail.jpg?ts=1655982587&ext=', 'video': None, 'motion_enabled': True, 'motion_detected': False, 'wifi_strength': -70, 'network_id': 66328, 'sync_module': 'Zuhause', 'last_record': None, 'type': 'catalina'}
Türklingel
{'name': 'unknown', 'camera_id': 'unknown', 'serial': None, 'temperature': None, 'temperature_c': None, 'temperature_calibrated': None, 'battery': None, 'battery_voltage': None, 'thumbnail': None, 'video': None, 'motion_enabled': 'unknown', 'motion_detected': False, 'wifi_strength': None, 'network_id': 66328, 'sync_module': 'Zuhause', 'last_record': None, 'type': None}

Das json zu streichen hat auch nichts neues gebracht.
Das kommt von der Konsole wenn ichs streich. Wahrscheinlich nicht wichtig aber ich schicks mal.

saeko@raspberrypi:/opt/iobroker $ python bild.py
Could not extract camera info: {'message': 'Camera not found', 'code': 500}
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown
Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable
Could not extract camera info: None
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown

@pischleuder said in Blink Camera System:

@soukai sagte in Blink Camera System:
Per iobroker aufruf sudo -u iobroker python3 ./bild.py kommt nun folgendes:
saeko@raspberrypi:/opt/iobroker $ sudo -u iobroker python3 ./bild.py
Traceback (most recent call last):
  File "/opt/iobroker/./bild.py", line 4, in <module>
    from blinkpy.blinkpy import Blink
ModuleNotFoundError: No module named 'blinkpy'

Wie gesagt, das ist komplett falsch und Du solltest das aus Deinen Gedanken streichen

Nagut

@pischleuder said in Blink Camera System:

Normaler aufruf per Konsole:

saeko@raspberrypi:/opt/iobroker $ python bild.py
Could not extract camera info: {'message': 'Camera not found', 'code': 500}
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown
Expected json response from https://rest-e004.immedia-semi.com/network/66328/camera/unknown/config, but received: 406: Not Acceptable
Could not extract camera info: None
Expected json response from https://rest-e004.immedia-semi.com/network/unknown/camera/unknown/signals, but received: 406: Not Acceptable
Could not retrieve calibrated temperature.
Could not find thumbnail for camera unknown

Dieser Aufruf wird nur mit ./bild.py gemacht, weil die Definition bereits für python im script ist und zwar mit

#!/usr/bin/python3

Meinst du in der Konsole oder in Iobroker dann? habe das mal versuchshalber ausprobiert in der Konsole und in iobroker:
./bild.py
aber konnte nicht aufgerufen werden. Habe auch das "#" entfernt probeweise im Script. Keine Änderung.

kommt folgendes in Konsole:

saeko@raspberrypi:/opt/iobroker $ sudo ./bild.py
sudo: ./bild.py: command not found
saeko@raspberrypi:/opt/iobroker $ ./bild.py
-bash: ./bild.py: Permission denied

NEWS

Blink Camera System

Support us

565
Online

31.6k
Users

79.4k
Topics

1.3m
Posts

NEWS

Blink Camera System

Support us

565Online

31.6kUsers

79.4kTopics

1.3mPosts

565
Online

31.6k
Users

79.4k
Topics

1.3m
Posts