Test Adapter e3dc-rscp v0.0.x GitHub
-
@arnod said in Test Adapter e3dc-rscp v0.0.x GitHub:
@ujok
Es sind ja jetzt einige neue Einstellmöglichkeiten dazu gekommen
Uli wofür ist die neue Instanz Einstellung: SET_IDLE_PERIOD Schreibverzögerung?
Mir ist aufgefallen das der Wert EMS.POWER_BAT immer wieder mal nicht jede sek. Abgerufen wird, obwohl dieser auf short eingestellt ist.
Wenn man sich die drei Werte POWER_BAT, POWER_GRID und POWER_HOME mit 1 sek. Anzeigen lässt, bleibt POWER_BAT ab und zu hängen.Hmm, es gibt wirklich etliche Sonderfälle und Tricks in dem Adapter, aber die POWER_{HOME,GRID,BAT,ADD} werden überall gleich behandelt, die S/M/L-Einstellung sollte der einzig mögliche Unterschied sein :rätsel:
Bei mir ändern sich auch nicht immer alle Werte gleichzeitig. Kann es nicht einfach sein, dass POWER_BAT mal ein paar Sekunden gleich bleibt? Z.B. weil das E3/DC die BAT_POWER etwas träger anpasst, oder weil die Messung etwas träger ist... wie lange bleibt POWER_BAT denn bei dir unverändert (während die anderen Werte schwanken)? -
@ujok sagte in Test Adapter e3dc-rscp v0.0.x GitHub:
BAT_POWER etwas träger anpasst, oder weil die Messung etwas träger ist... wie lange bleibt POWER_BAT denn bei dir unverändert (während die anderen Werte schwanken)?
Habe es jetzt mit dem Modbus Adapter verglichen und dort ist es auch so. Wahrscheinlich hast du recht, dass sich der Wert einfach nicht jede sek. Ändert.
Den Text hatte ich schon gelesen, nur nicht ganz verstanden. Heißt das, mit SET_IDLE_PERIOD in der eingestellten Zeit alle bis dahin gemachten Änderungen in einem Aufruf übertragen werden? und bis dahin alle Änderungen nicht aktiv sind?
Was ist mit SET_POWER_MODE und SET_POWER_VALUE, werden diese dann auch erst verzögert übertragen ? -
@ujok
Kann es sein das die beiden Tags:
e3dc-rscp.0.EMS.REMAINING_BAT_CHARGE_POWER und e3dc-rscp.0.EMS.REMAINING_BAT_DISCHARGE_POWER
nicht abgerufen werden?Diese Werte ändern sich bei mir nicht, obwohl gerade aus der Batterie entladen wird.
Bin davon ausgegangen das diese beiden Werte die restliche verbleibende Lade / Entladeleistung anzeigen. -
@arnod said in Test Adapter e3dc-rscp v0.0.x GitHub:
@ujok sagte in Test Adapter e3dc-rscp v0.0.x GitHub:
BAT_POWER etwas träger anpasst, oder weil die Messung etwas träger ist... wie lange bleibt POWER_BAT denn bei dir unverändert (während die anderen Werte schwanken)?
Habe es jetzt mit dem Modbus Adapter verglichen und dort ist es auch so. Wahrscheinlich hast du recht, dass sich der Wert einfach nicht jede sek. Ändert.
Den Text hatte ich schon gelesen, nur nicht ganz verstanden. Heißt das, mit SET_IDLE_PERIOD in der eingestellten Zeit alle bis dahin gemachten Änderungen in einem Aufruf übertragen werden? und bis dahin alle Änderungen nicht aktiv sind?
Wenn du innerhalb einer Idle-Period (an den 5 Feldern) Änderungen machst, wird erst dann übertragen, wenn du für eine Dauer von mindestens <SET_IDLE_PERIOD delay> nichts mehr änderst. Dann werden alle Änderungen auf einmal übertragen. Anders herum: jede Änderung setzt für diese eine Idle Period einen Timeout bzw. setzt ihn zurück; erst wenn er abläuft, wird übertragen.
(Ich ergänze den Text im README.md, damit das etwas klarer wird.)Was ist mit SET_POWER_MODE und SET_POWER_VALUE, werden diese dann auch erst verzögert übertragen ?
Nein, diese werden aktuell nach jeder Änderung zunächst einzeln übertragen und danach (sofern MODE ungleich 0 ist) alle <SET_POWER resend interval> paarweise wiederholt.
Das könnte ich analog zu den idle periods umstellen, wenn sinnvoll und hilfreich. -
@arnod said in Test Adapter e3dc-rscp v0.0.x GitHub:
@ujok
Kann es sein das die beiden Tags:
e3dc-rscp.0.EMS.REMAINING_BAT_CHARGE_POWER und e3dc-rscp.0.EMS.REMAINING_BAT_DISCHARGE_POWER
nicht abgerufen werden?Diese Werte ändern sich bei mir nicht, obwohl gerade aus der Batterie entladen wird.
Bin davon ausgegangen das diese beiden Werte die restliche verbleibende Lade / Entladeleistung anzeigen.Die beiden Werte werden abgerufen (voreingestelltes Intervall M) und zeigen bei mir auch sinnvolle Werte an (habe allerdings aktuell keine PV-Leistung anliegen).
Was den Inhalt anbelangt, kenne ich auch nur die Beschreibung aus der Tag-Liste. Diese lese ich so, dass es sich um die über die aktuelle Ladeleistung hinaus noch verfügbare Ladeleistung handelt, also z.B. 2000 W wenn gerade mit 1000 W geladen wird und das Maximum der Anlage bei 3000 W Ladeleistung liegt.Die entsprechende Summe
BAT_0.SPECIFIED_CHARGE_POWER = POWER_BAT + REMAINING_BAT_CHARGE_POWER
geht bei mir auch einigermaßen auf. -
@ujok sagte in Test Adapter e3dc-rscp v0.0.x GitHub:
Die beiden Werte werden abgerufen (voreingestelltes Intervall M) und zeigen bei mir auch sinnvolle Werte an (habe allerdings aktuell keine PV-Leistung anliegen).
Ok dann ist bei mir noch was schiefgelaufen, diese beiden Werte ändern sich nicht.
Werde den Adapter noch mal neu installieren und dann noch mal prüfen. -
@ujok sagte in Test Adapter e3dc-rscp v0.0.x GitHub:
Wenn du innerhalb einer Idle-Period (an den 5 Feldern) Änderungen machst, wird erst dann übertragen, wenn du für eine Dauer von mindestens <SET_IDLE_PERIOD delay> nichts mehr änderst. Dann werden alle Änderungen auf einmal übertragen. Anders herum: jede Änderung setzt für diese eine Idle Period einen Timeout bzw. setzt ihn zurück; erst wenn er abläuft, wird übertragen.
(Ich ergänze den Text im README.md, damit das etwas klarer wird.)Ok jetzt verstanden
Was ist mit SET_POWER_MODE und SET_POWER_VALUE, werden diese dann auch erst verzögert übertragen ?
Nein, diese werden aktuell nach jeder Änderung zunächst einzeln übertragen und danach (sofern MODE ungleich 0 ist) alle <SET_POWER resend interval> paarweise wiederholt.
Das könnte ich analog zu den idle periods umstellen, wenn sinnvoll und hilfreich.Bitte erstmal so lassen. Kann sein das die automatische Wiederholung auch noch rausmuss, das kann ich aber erst sicher sagen, wenn ich mein Script soweit fertig habe um zu sehen was für die Steuerung besser funktioniert.
-
@ujok
Habe den Adapter neu installiert und vor der Neuinstallation alles gelöscht.
Der Tag REMAINING_BAT_DISCHARGE_POWER wird bei mir nur einmal beim Start aktualisiert, und zwar immer auf denselben Wert von 11997W und bleibt dann so obwohl die Batterie ja entladen wird. Habe diesen Wert auch schon auf s eingestellt und ändert sich nicht.Den Wert REMAINING_BAT_CHARGE_POWER kann ich im Moment nicht testen wegen fehlender PV-Leistung vom Dach.
Update:
Ok habe jetzt den Fehler gefunden bzw. bin ich hier von was anderem ausgegangen.
Der Tag REMAINING_BAT_DISCHARGE_POWER ist bei mir die Rückmeldung von MAX_DISCHARGE_POWER.
Diese beiden Tags haben immer denselben Wert.
Das Gleiche ist auch bei REMAINING_BAT_CHARGE_POWER und MAX_CHARGE_POWER.
Da ist REMAINING_BAT_CHARGE_POWER auch die Rückmeldung von der Einstellung MAX_CHARGE_POWER.Uli, wenn das bei dir anders ist, hat E3DC hier zwei unterschiedliche Werte je nach Model auf die Tags gelegt.
-
Eventuell sollten wir mal ein paar Werte vergleichen, die nicht schlüssig sind, um zu sehen, ob das bei allen so ist.
Habe mal folgende Werte die für mich keinen Sinn ergeben:
e3dc-rscp.0.EMS.SYS_SPECS.maxPvPower = 6 W
Hier hätte ich 15000W was meiner installierten PV-Leistung entspricht erwartete3dc-rscp.0.EMS.BALANCED_PHASES = 7
Mit dem Wert kann ich nichts anfange, dachte immer ich hätte nur 3 Phasen Weiß jemand mehr darüber? -
@arnod said in Test Adapter e3dc-rscp v0.0.x GitHub:
@ujok
Der Tag REMAINING_BAT_DISCHARGE_POWER ist bei mir die Rückmeldung von MAX_DISCHARGE_POWER.
Diese beiden Tags haben immer denselben Wert.
Das Gleiche ist auch bei REMAINING_BAT_CHARGE_POWER und MAX_CHARGE_POWER.
Da ist REMAINING_BAT_CHARGE_POWER auch die Rückmeldung von der Einstellung MAX_CHARGE_POWER.Uli, wenn das bei dir anders ist, hat E3DC hier zwei unterschiedliche Werte je nach Model auf die Tags gelegt.
Das ist sehr unschön. Bei mir sieht das wirklich anders aus:
MAX_DISCHARGE_POWER = 2999 W habe ich eingestellt
REMAINING_BAT_DISCHARGE_POWER = 0 W macht Sinn, weil die Batterie leer ist
Jedenfalls sind die beiden Werte bei mir definitiv nicht gleich.Aber wirklich verstanden habe ich den Inhalt der Werte auch nicht, denn
MAX_CHARGE_POWER = 3000 W
REMAINING_BAT_CHARGE_POWER = 97 W
kann ich (bei leerer Batterie und Null PV-Leistung) nicht nachvollziehen.Der Adapter kann halt die Werte erstmal nur 1:1 wiedergeben, solange wir nicht klare Regeln bekommen, wie ggf. umzurechnen oder auch umzubenennen ist.
-
@arnod said in Test Adapter e3dc-rscp v0.0.x GitHub:
Eventuell sollten wir mal ein paar Werte vergleichen, die nicht schlüssig sind, um zu sehen, ob das bei allen so ist.
Habe mal folgende Werte die für mich keinen Sinn ergeben:
e3dc-rscp.0.EMS.SYS_SPECS.maxPvPower = 6 W
Hier hätte ich 15000W was meiner installierten PV-Leistung entspricht erwartetAuch bei mir ist
e3dc-rscp.0.EMS.SYS_SPECS.maxPvPower = 6 WKorrekt ist jedoch
e3dc-rscp.0.EMS.INSTALLED_PEAK_POWER = 7700 WIch habe den Eindruck, dass es durchaus obsolete Felder gibt, die im E3/DC einfach nicht (mehr) verwendet bzw. korrekt gefüllt werden und befürchte, wir müssen nach "Augenschein" das jeweils passende verwenden.
e3dc-rscp.0.EMS.BALANCED_PHASES = 7
Mit dem Wert kann ich nichts anfange, dachte immer ich hätte nur 3 Phasen Weiß jemand mehr darüber?e3dc-rscp.0.EMS.BALANCED_PHASES = 7
Das ist bei mir ebenso, auch ich halte es für falsch und habe keine Erklärung.Nachtrag: es gibt auch REQ_SET_BALANCED_PHASES, d.h. man kann die Anzahl der Phasen auch setzen - das macht bei den üblichen 3 Phasen keinen Sinn, deshalb wird die Bedeutung von BALANCED_PHASES wohl eine andere sein.
-
Hier ist eine neue Version.
Hinzugekommen ist ausschließlich der WB (wallbox) namespace.
Der Status ist "experimental", weil ich mangels E3/DC Wallbox nicht testen kann.
D.h. ich bin auf Euer Testen und Feedback angewiesen, wenn WB im Adapter bleiben soll.0.0.15-beta
First attempt to read wallbox data (namespace WB).
NOTE: WB namespace is not tested, due to missing hardware.
If no wallbox is attached to E3/DC, the following warning will be logged:
Received data type ERROR: RSCP_ERR_NOT_HANDLED (1) - tag TAG_WB_CONNECTED_DEVICES (0xe84101c) -
@ujok
0.0.15-BETA installed and adapter restarted >> no additional information under Object-Tree "WB"
See debug-log (debug-mode):
Debug-iobroker.e3dc-rscp01.txt
-
@kkeintzel
Danke fürs schnelle testen.
Ich kann im Debug-Log sehen, dass der Adapter mit TAG_WB_REQ_CONNECTED_DEVICES die Anzahl der angebundenen Wallboxes abfragt, aber wird die Antwort nicht protokolliert.
Kannst du bitte das Logging auf Alles/silly einstellen und das Protokoll der Adapter-Startphase posten?Habe den Fehler schon gefunden: die Anzahl der Wallboxes wird bei Empfang nicht korrekt abgelegt - Fix für v15 folgt demnächst.
-
Ok Version 0.0.15-BETA installiert.
Es werden keine Werte mehr übermittelt.
LOG auf silly:2021-12-05 10:26:14.276 - debug: e3dc-rscp.0 (15335) Sending request TAG_EMS_REQ_POWER_BAT 2021-12-05 10:26:14.277 - silly: e3dc-rscp.0 (15335) OUT: magic: >E3DC< is OK - ctrl: >0011< is OK - Version 1, with CRC - seconds: 1638696374 - nseconds: 0 - length: 50 TAG_EMS_REQ_POWER_BAT - type: 0x00 - None - length: 0 TAG_EMS_REQ_POWER_HOME - type: 0x00 - None - length: 0 TAG_EMS_REQ_POWER_GRID - type: 0x00 - None - length: 0 TAG_EMS_REQ_POWER_ADD - type: 0x00 - None - length: 0 TAG_EMS_REQ_MODE - type: 0x00 - None - length: 0 TAG_EMS_REQ_ALIVE - type: 0x01 - Bool - length: 1 value: 0x01 TAG_EMS_REQ_STATUS - type: 0x00 - None - length: 0 CRC32 2021-12-05 10:26:14.277 - silly: e3dc-rscp.0 (15335) E3 DC 00 11 B6 85 AC 61 00 00 00 00 00 00 00 00 -- .......a........ 32 00 02 00 00 01 00 00 00 03 00 00 01 00 00 00 -- 2............... 04 00 00 01 00 00 00 05 00 00 01 00 00 00 11 00 -- ................ 00 01 00 00 00 00 00 05 01 01 01 00 01 40 00 00 -- .............@.. 01 00 00 00 B7 66 59 26 -- .....fY& 2021-12-05 10:26:14.278 - silly: e3dc-rscp.0 (15335) Successfully written data to socket 2021-12-05 10:26:14.283 - silly: e3dc-rscp.0 (15335) Received response 2021-12-05 10:26:14.285 - silly: e3dc-rscp.0 (15335) TAG_EMS_POWER_BAT 2021-12-05 10:26:14.285 - silly: e3dc-rscp.0 (15335) IN: magic: >E3DC< is OK - ctrl: >0011< is OK - Version 1, with CRC - seconds: 1638696375 - nseconds: 320078000 - length: 77 TAG_EMS_POWER_BAT - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_POWER_HOME - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_POWER_GRID - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_POWER_ADD - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_MODE - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_ALIVE - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_STATUS - type: 0xFF - Error - length: 4 value: 2 no CRC32 2021-12-05 10:26:14.286 - silly: e3dc-rscp.0 (15335) E3 DC 00 11 B7 85 AC 61 00 00 00 00 B0 00 14 13 -- .......a........ 4D 00 02 00 80 01 FF 04 00 02 00 00 00 03 00 80 -- M............... 01 FF 04 00 02 00 00 00 04 00 80 01 FF 04 00 02 -- ................ 00 00 00 05 00 80 01 FF 04 00 02 00 00 00 11 00 -- ................ 80 01 FF 04 00 02 00 00 00 00 00 85 01 FF 04 00 -- ................ 02 00 00 00 40 00 80 01 FF 04 00 02 00 00 00 FC -- ....@........... 5A BC EF 00 00 00 00 00 00 00 00 00 00 00 00 00 -- Z............... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -- ................ 2021-12-05 10:26:14.286 - silly: e3dc-rscp.0 (15335) processTree: path = , tree = [ {TAG_EMS_POWER_BAT(Error) = 2}, {TAG_EMS_POWER_HOME(Error) = 2}, {TAG_EMS_POWER_GRID(Error) = 2}, {TAG_EMS_POWER_ADD(Error) = 2}, {TAG_EMS_MODE(Error) = 2}, {TAG_EMS_ALIVE(Error) = 2}, {TAG_EMS_STATUS(Error) = 2}, ] 2021-12-05 10:26:14.286 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_BAT (0x1800002) 2021-12-05 10:26:14.286 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_HOME (0x1800003) 2021-12-05 10:26:14.287 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_GRID (0x1800004) 2021-12-05 10:26:14.287 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_ADD (0x1800005) 2021-12-05 10:26:14.287 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_MODE (0x1800011) 2021-12-05 10:26:14.287 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_ALIVE (0x1850000) 2021-12-05 10:26:14.287 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_STATUS (0x1800040) 2021-12-05 10:26:14.289 - silly: e3dc-rscp.0 (15335) Message queue is empty 2021-12-05 10:26:44.276 - debug: e3dc-rscp.0 (15335) Sending request TAG_EMS_REQ_POWER_BAT 2021-12-05 10:26:44.277 - silly: e3dc-rscp.0 (15335) OUT: magic: >E3DC< is OK - ctrl: >0011< is OK - Version 1, with CRC - seconds: 1638696404 - nseconds: 0 - length: 50 TAG_EMS_REQ_POWER_BAT - type: 0x00 - None - length: 0 TAG_EMS_REQ_POWER_HOME - type: 0x00 - None - length: 0 TAG_EMS_REQ_POWER_GRID - type: 0x00 - None - length: 0 TAG_EMS_REQ_POWER_ADD - type: 0x00 - None - length: 0 TAG_EMS_REQ_MODE - type: 0x00 - None - length: 0 TAG_EMS_REQ_ALIVE - type: 0x01 - Bool - length: 1 value: 0x01 TAG_EMS_REQ_STATUS - type: 0x00 - None - length: 0 CRC32 2021-12-05 10:26:44.277 - silly: e3dc-rscp.0 (15335) E3 DC 00 11 D4 85 AC 61 00 00 00 00 00 00 00 00 -- .......a........ 32 00 02 00 00 01 00 00 00 03 00 00 01 00 00 00 -- 2............... 04 00 00 01 00 00 00 05 00 00 01 00 00 00 11 00 -- ................ 00 01 00 00 00 00 00 05 01 01 01 00 01 40 00 00 -- .............@.. 01 00 00 00 10 0F C0 10 -- ........ 2021-12-05 10:26:44.278 - silly: e3dc-rscp.0 (15335) Successfully written data to socket 2021-12-05 10:26:44.287 - silly: e3dc-rscp.0 (15335) Received response 2021-12-05 10:26:44.289 - silly: e3dc-rscp.0 (15335) TAG_EMS_POWER_BAT 2021-12-05 10:26:44.290 - silly: e3dc-rscp.0 (15335) IN: magic: >E3DC< is OK - ctrl: >0011< is OK - Version 1, with CRC - seconds: 1638696405 - nseconds: 324891000 - length: 77 TAG_EMS_POWER_BAT - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_POWER_HOME - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_POWER_GRID - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_POWER_ADD - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_MODE - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_ALIVE - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_STATUS - type: 0xFF - Error - length: 4 value: 2 no CRC32 2021-12-05 10:26:44.291 - silly: e3dc-rscp.0 (15335) E3 DC 00 11 D5 85 AC 61 00 00 00 00 78 71 5D 13 -- .......a....xq]. 4D 00 02 00 80 01 FF 04 00 02 00 00 00 03 00 80 -- M............... 01 FF 04 00 02 00 00 00 04 00 80 01 FF 04 00 02 -- ................ 00 00 00 05 00 80 01 FF 04 00 02 00 00 00 11 00 -- ................ 80 01 FF 04 00 02 00 00 00 00 00 85 01 FF 04 00 -- ................ 02 00 00 00 40 00 80 01 FF 04 00 02 00 00 00 BA -- ....@........... 38 40 B8 00 00 00 00 00 00 00 00 00 00 00 00 00 -- 8@.............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -- ................ 2021-12-05 10:26:44.291 - silly: e3dc-rscp.0 (15335) processTree: path = , tree = [ {TAG_EMS_POWER_BAT(Error) = 2}, {TAG_EMS_POWER_HOME(Error) = 2}, {TAG_EMS_POWER_GRID(Error) = 2}, {TAG_EMS_POWER_ADD(Error) = 2}, {TAG_EMS_MODE(Error) = 2}, {TAG_EMS_ALIVE(Error) = 2}, {TAG_EMS_STATUS(Error) = 2}, ] 2021-12-05 10:26:44.291 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_BAT (0x1800002) 2021-12-05 10:26:44.292 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_HOME (0x1800003) 2021-12-05 10:26:44.292 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_GRID (0x1800004) 2021-12-05 10:26:44.292 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_ADD (0x1800005) 2021-12-05 10:26:44.292 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_MODE (0x1800011) 2021-12-05 10:26:44.292 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_ALIVE (0x1850000) 2021-12-05 10:26:44.293 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_STATUS (0x1800040) 2021-12-05 10:26:44.293 - silly: e3dc-rscp.0 (15335) Message queue is empty 2021-12-05 10:27:14.276 - debug: e3dc-rscp.0 (15335) Sending request TAG_EMS_REQ_POWER_BAT 2021-12-05 10:27:14.277 - silly: e3dc-rscp.0 (15335) OUT: magic: >E3DC< is OK - ctrl: >0011< is OK - Version 1, with CRC - seconds: 1638696434 - nseconds: 0 - length: 50 TAG_EMS_REQ_POWER_BAT - type: 0x00 - None - length: 0 TAG_EMS_REQ_POWER_HOME - type: 0x00 - None - length: 0 TAG_EMS_REQ_POWER_GRID - type: 0x00 - None - length: 0 TAG_EMS_REQ_POWER_ADD - type: 0x00 - None - length: 0 TAG_EMS_REQ_MODE - type: 0x00 - None - length: 0 TAG_EMS_REQ_ALIVE - type: 0x01 - Bool - length: 1 value: 0x01 TAG_EMS_REQ_STATUS - type: 0x00 - None - length: 0 CRC32 2021-12-05 10:27:14.277 - silly: e3dc-rscp.0 (15335) E3 DC 00 11 F2 85 AC 61 00 00 00 00 00 00 00 00 -- .......a........ 32 00 02 00 00 01 00 00 00 03 00 00 01 00 00 00 -- 2............... 04 00 00 01 00 00 00 05 00 00 01 00 00 00 11 00 -- ................ 00 01 00 00 00 00 00 05 01 01 01 00 01 40 00 00 -- .............@.. 01 00 00 00 97 00 32 63 -- ......2c 2021-12-05 10:27:14.278 - silly: e3dc-rscp.0 (15335) Successfully written data to socket 2021-12-05 10:27:14.285 - silly: e3dc-rscp.0 (15335) Received response 2021-12-05 10:27:14.285 - silly: e3dc-rscp.0 (15335) TAG_EMS_POWER_BAT 2021-12-05 10:27:14.286 - silly: e3dc-rscp.0 (15335) IN: magic: >E3DC< is OK - ctrl: >0011< is OK - Version 1, with CRC - seconds: 1638696435 - nseconds: 325547000 - length: 77 TAG_EMS_POWER_BAT - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_POWER_HOME - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_POWER_GRID - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_POWER_ADD - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_MODE - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_ALIVE - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_STATUS - type: 0xFF - Error - length: 4 value: 2 no CRC32 2021-12-05 10:27:14.286 - silly: e3dc-rscp.0 (15335) E3 DC 00 11 F3 85 AC 61 00 00 00 00 F8 73 67 13 -- .......a.....sg. 4D 00 02 00 80 01 FF 04 00 02 00 00 00 03 00 80 -- M............... 01 FF 04 00 02 00 00 00 04 00 80 01 FF 04 00 02 -- ................ 00 00 00 05 00 80 01 FF 04 00 02 00 00 00 11 00 -- ................ 80 01 FF 04 00 02 00 00 00 00 00 85 01 FF 04 00 -- ................ 02 00 00 00 40 00 80 01 FF 04 00 02 00 00 00 98 -- ....@........... 11 40 94 00 00 00 00 00 00 00 00 00 00 00 00 00 -- .@.............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -- ................ 2021-12-05 10:27:14.286 - silly: e3dc-rscp.0 (15335) processTree: path = , tree = [ {TAG_EMS_POWER_BAT(Error) = 2}, {TAG_EMS_POWER_HOME(Error) = 2}, {TAG_EMS_POWER_GRID(Error) = 2}, {TAG_EMS_POWER_ADD(Error) = 2}, {TAG_EMS_MODE(Error) = 2}, {TAG_EMS_ALIVE(Error) = 2}, {TAG_EMS_STATUS(Error) = 2}, ] 2021-12-05 10:27:14.287 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_BAT (0x1800002) 2021-12-05 10:27:14.287 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_HOME (0x1800003) 2021-12-05 10:27:14.287 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_GRID (0x1800004) 2021-12-05 10:27:14.287 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_ADD (0x1800005) 2021-12-05 10:27:14.287 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_MODE (0x1800011) 2021-12-05 10:27:14.288 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_ALIVE (0x1850000) 2021-12-05 10:27:14.288 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_STATUS (0x1800040) 2021-12-05 10:27:14.289 - silly: e3dc-rscp.0 (15335) Message queue is empty 2021-12-05 10:27:44.278 - debug: e3dc-rscp.0 (15335) Sending request TAG_EMS_REQ_POWER_BAT 2021-12-05 10:27:44.279 - silly: e3dc-rscp.0 (15335) OUT: magic: >E3DC< is OK - ctrl: >0011< is OK - Version 1, with CRC - seconds: 1638696464 - nseconds: 0 - length: 50 TAG_EMS_REQ_POWER_BAT - type: 0x00 - None - length: 0 TAG_EMS_REQ_POWER_HOME - type: 0x00 - None - length: 0 TAG_EMS_REQ_POWER_GRID - type: 0x00 - None - length: 0 TAG_EMS_REQ_POWER_ADD - type: 0x00 - None - length: 0 TAG_EMS_REQ_MODE - type: 0x00 - None - length: 0 TAG_EMS_REQ_ALIVE - type: 0x01 - Bool - length: 1 value: 0x01 TAG_EMS_REQ_STATUS - type: 0x00 - None - length: 0 CRC32 2021-12-05 10:27:44.279 - silly: e3dc-rscp.0 (15335) E3 DC 00 11 10 86 AC 61 00 00 00 00 00 00 00 00 -- .......a........ 32 00 02 00 00 01 00 00 00 03 00 00 01 00 00 00 -- 2............... 04 00 00 01 00 00 00 05 00 00 01 00 00 00 11 00 -- ................ 00 01 00 00 00 00 00 05 01 01 01 00 01 40 00 00 -- .............@.. 01 00 00 00 3A 63 27 8C -- ....:c'. 2021-12-05 10:27:44.281 - silly: e3dc-rscp.0 (15335) Successfully written data to socket 2021-12-05 10:27:44.287 - silly: e3dc-rscp.0 (15335) Received response 2021-12-05 10:27:44.288 - silly: e3dc-rscp.0 (15335) TAG_EMS_POWER_BAT 2021-12-05 10:27:44.289 - silly: e3dc-rscp.0 (15335) IN: magic: >E3DC< is OK - ctrl: >0011< is OK - Version 1, with CRC - seconds: 1638696465 - nseconds: 328066000 - length: 77 TAG_EMS_POWER_BAT - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_POWER_HOME - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_POWER_GRID - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_POWER_ADD - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_MODE - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_ALIVE - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_STATUS - type: 0xFF - Error - length: 4 value: 2 no CRC32 2021-12-05 10:27:44.290 - silly: e3dc-rscp.0 (15335) E3 DC 00 11 11 86 AC 61 00 00 00 00 D0 E3 8D 13 -- .......a........ 4D 00 02 00 80 01 FF 04 00 02 00 00 00 03 00 80 -- M............... 01 FF 04 00 02 00 00 00 04 00 80 01 FF 04 00 02 -- ................ 00 00 00 05 00 80 01 FF 04 00 02 00 00 00 11 00 -- ................ 80 01 FF 04 00 02 00 00 00 00 00 85 01 FF 04 00 -- ................ 02 00 00 00 40 00 80 01 FF 04 00 02 00 00 00 D1 -- ....@........... D3 15 F1 00 00 00 00 00 00 00 00 00 00 00 00 00 -- ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -- ................ 2021-12-05 10:27:44.290 - silly: e3dc-rscp.0 (15335) processTree: path = , tree = [ {TAG_EMS_POWER_BAT(Error) = 2}, {TAG_EMS_POWER_HOME(Error) = 2}, {TAG_EMS_POWER_GRID(Error) = 2}, {TAG_EMS_POWER_ADD(Error) = 2}, {TAG_EMS_MODE(Error) = 2}, {TAG_EMS_ALIVE(Error) = 2}, {TAG_EMS_STATUS(Error) = 2}, ] 2021-12-05 10:27:44.297 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_BAT (0x1800002) 2021-12-05 10:27:44.297 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_HOME (0x1800003) 2021-12-05 10:27:44.299 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_GRID (0x1800004) 2021-12-05 10:27:44.299 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_ADD (0x1800005) 2021-12-05 10:27:44.300 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_MODE (0x1800011) 2021-12-05 10:27:44.300 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_ALIVE (0x1850000) 2021-12-05 10:27:44.300 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_STATUS (0x1800040) 2021-12-05 10:27:44.301 - silly: e3dc-rscp.0 (15335) Message queue is empty 2021-12-05 10:28:14.277 - debug: e3dc-rscp.0 (15335) Sending request TAG_EMS_REQ_POWER_BAT 2021-12-05 10:28:14.278 - silly: e3dc-rscp.0 (15335) OUT: magic: >E3DC< is OK - ctrl: >0011< is OK - Version 1, with CRC - seconds: 1638696494 - nseconds: 0 - length: 50 TAG_EMS_REQ_POWER_BAT - type: 0x00 - None - length: 0 TAG_EMS_REQ_POWER_HOME - type: 0x00 - None - length: 0 TAG_EMS_REQ_POWER_GRID - type: 0x00 - None - length: 0 TAG_EMS_REQ_POWER_ADD - type: 0x00 - None - length: 0 TAG_EMS_REQ_MODE - type: 0x00 - None - length: 0 TAG_EMS_REQ_ALIVE - type: 0x01 - Bool - length: 1 value: 0x01 TAG_EMS_REQ_STATUS - type: 0x00 - None - length: 0 CRC32 2021-12-05 10:28:14.278 - silly: e3dc-rscp.0 (15335) E3 DC 00 11 2E 86 AC 61 00 00 00 00 00 00 00 00 -- .......a........ 32 00 02 00 00 01 00 00 00 03 00 00 01 00 00 00 -- 2............... 04 00 00 01 00 00 00 05 00 00 01 00 00 00 11 00 -- ................ 00 01 00 00 00 00 00 05 01 01 01 00 01 40 00 00 -- .............@.. 01 00 00 00 8E E1 35 C3 -- ......5. 2021-12-05 10:28:14.279 - silly: e3dc-rscp.0 (15335) Successfully written data to socket 2021-12-05 10:28:14.286 - silly: e3dc-rscp.0 (15335) Received response 2021-12-05 10:28:14.287 - silly: e3dc-rscp.0 (15335) TAG_EMS_POWER_BAT 2021-12-05 10:28:14.287 - silly: e3dc-rscp.0 (15335) IN: magic: >E3DC< is OK - ctrl: >0011< is OK - Version 1, with CRC - seconds: 1638696495 - nseconds: 327713000 - length: 77 TAG_EMS_POWER_BAT - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_POWER_HOME - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_POWER_GRID - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_POWER_ADD - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_MODE - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_ALIVE - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_STATUS - type: 0xFF - Error - length: 4 value: 2 no CRC32 2021-12-05 10:28:14.287 - silly: e3dc-rscp.0 (15335) E3 DC 00 11 2F 86 AC 61 00 00 00 00 E8 80 88 13 -- ..../..a........ 4D 00 02 00 80 01 FF 04 00 02 00 00 00 03 00 80 -- M............... 01 FF 04 00 02 00 00 00 04 00 80 01 FF 04 00 02 -- ................ 00 00 00 05 00 80 01 FF 04 00 02 00 00 00 11 00 -- ................ 80 01 FF 04 00 02 00 00 00 00 00 85 01 FF 04 00 -- ................ 02 00 00 00 40 00 80 01 FF 04 00 02 00 00 00 DD -- ....@........... 17 4B 7C 00 00 00 00 00 00 00 00 00 00 00 00 00 -- .K|............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -- ................ 2021-12-05 10:28:14.288 - silly: e3dc-rscp.0 (15335) processTree: path = , tree = [ {TAG_EMS_POWER_BAT(Error) = 2}, {TAG_EMS_POWER_HOME(Error) = 2}, {TAG_EMS_POWER_GRID(Error) = 2}, {TAG_EMS_POWER_ADD(Error) = 2}, {TAG_EMS_MODE(Error) = 2}, {TAG_EMS_ALIVE(Error) = 2}, {TAG_EMS_STATUS(Error) = 2}, ] 2021-12-05 10:28:14.288 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_BAT (0x1800002) 2021-12-05 10:28:14.288 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_HOME (0x1800003) 2021-12-05 10:28:14.288 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_GRID (0x1800004) 2021-12-05 10:28:14.289 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_ADD (0x1800005) 2021-12-05 10:28:14.289 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_MODE (0x1800011) 2021-12-05 10:28:14.289 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_ALIVE (0x1850000) 2021-12-05 10:28:14.289 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_STATUS (0x1800040) 2021-12-05 10:28:14.289 - silly: e3dc-rscp.0 (15335) Message queue is empty 2021-12-05 10:28:44.277 - debug: e3dc-rscp.0 (15335) Sending request TAG_EMS_REQ_POWER_BAT 2021-12-05 10:28:44.278 - silly: e3dc-rscp.0 (15335) OUT: magic: >E3DC< is OK - ctrl: >0011< is OK - Version 1, with CRC - seconds: 1638696524 - nseconds: 0 - length: 50 TAG_EMS_REQ_POWER_BAT - type: 0x00 - None - length: 0 TAG_EMS_REQ_POWER_HOME - type: 0x00 - None - length: 0 TAG_EMS_REQ_POWER_GRID - type: 0x00 - None - length: 0 TAG_EMS_REQ_POWER_ADD - type: 0x00 - None - length: 0 TAG_EMS_REQ_MODE - type: 0x00 - None - length: 0 TAG_EMS_REQ_ALIVE - type: 0x01 - Bool - length: 1 value: 0x01 TAG_EMS_REQ_STATUS - type: 0x00 - None - length: 0 CRC32 2021-12-05 10:28:44.278 - silly: e3dc-rscp.0 (15335) E3 DC 00 11 4C 86 AC 61 00 00 00 00 00 00 00 00 -- ....L..a........ 32 00 02 00 00 01 00 00 00 03 00 00 01 00 00 00 -- 2............... 04 00 00 01 00 00 00 05 00 00 01 00 00 00 11 00 -- ................ 00 01 00 00 00 00 00 05 01 01 01 00 01 40 00 00 -- .............@.. 01 00 00 00 29 88 AC F5 -- ....)... 2021-12-05 10:28:44.279 - silly: e3dc-rscp.0 (15335) Successfully written data to socket 2021-12-05 10:28:44.282 - silly: e3dc-rscp.0 (15335) Received response 2021-12-05 10:28:44.282 - silly: e3dc-rscp.0 (15335) TAG_EMS_POWER_BAT 2021-12-05 10:28:44.283 - silly: e3dc-rscp.0 (15335) IN: magic: >E3DC< is OK - ctrl: >0011< is OK - Version 1, with CRC - seconds: 1638696525 - nseconds: 324069000 - length: 77 TAG_EMS_POWER_BAT - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_POWER_HOME - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_POWER_GRID - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_POWER_ADD - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_MODE - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_ALIVE - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_STATUS - type: 0xFF - Error - length: 4 value: 2 no CRC32 2021-12-05 10:28:44.283 - silly: e3dc-rscp.0 (15335) E3 DC 00 11 4D 86 AC 61 00 00 00 00 88 E6 50 13 -- ....M..a......P. 4D 00 02 00 80 01 FF 04 00 02 00 00 00 03 00 80 -- M............... 01 FF 04 00 02 00 00 00 04 00 80 01 FF 04 00 02 -- ................ 00 00 00 05 00 80 01 FF 04 00 02 00 00 00 11 00 -- ................ 80 01 FF 04 00 02 00 00 00 00 00 85 01 FF 04 00 -- ................ 02 00 00 00 40 00 80 01 FF 04 00 02 00 00 00 86 -- ....@........... 1A CB 89 00 00 00 00 00 00 00 00 00 00 00 00 00 -- ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -- ................ 2021-12-05 10:28:44.283 - silly: e3dc-rscp.0 (15335) processTree: path = , tree = [ {TAG_EMS_POWER_BAT(Error) = 2}, {TAG_EMS_POWER_HOME(Error) = 2}, {TAG_EMS_POWER_GRID(Error) = 2}, {TAG_EMS_POWER_ADD(Error) = 2}, {TAG_EMS_MODE(Error) = 2}, {TAG_EMS_ALIVE(Error) = 2}, {TAG_EMS_STATUS(Error) = 2}, ] 2021-12-05 10:28:44.283 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_BAT (0x1800002) 2021-12-05 10:28:44.284 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_HOME (0x1800003) 2021-12-05 10:28:44.284 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_GRID (0x1800004) 2021-12-05 10:28:44.284 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_ADD (0x1800005) 2021-12-05 10:28:44.284 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_MODE (0x1800011) 2021-12-05 10:28:44.284 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_ALIVE (0x1850000) 2021-12-05 10:28:44.285 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_STATUS (0x1800040) 2021-12-05 10:28:44.285 - silly: e3dc-rscp.0 (15335) Message queue is empty 2021-12-05 10:29:14.278 - debug: e3dc-rscp.0 (15335) Sending request TAG_EMS_REQ_POWER_BAT 2021-12-05 10:29:14.283 - silly: e3dc-rscp.0 (15335) OUT: magic: >E3DC< is OK - ctrl: >0011< is OK - Version 1, with CRC - seconds: 1638696554 - nseconds: 0 - length: 50 TAG_EMS_REQ_POWER_BAT - type: 0x00 - None - length: 0 TAG_EMS_REQ_POWER_HOME - type: 0x00 - None - length: 0 TAG_EMS_REQ_POWER_GRID - type: 0x00 - None - length: 0 TAG_EMS_REQ_POWER_ADD - type: 0x00 - None - length: 0 TAG_EMS_REQ_MODE - type: 0x00 - None - length: 0 TAG_EMS_REQ_ALIVE - type: 0x01 - Bool - length: 1 value: 0x01 TAG_EMS_REQ_STATUS - type: 0x00 - None - length: 0 CRC32 2021-12-05 10:29:14.283 - silly: e3dc-rscp.0 (15335) E3 DC 00 11 6A 86 AC 61 00 00 00 00 00 00 00 00 -- ....j..a........ 32 00 02 00 00 01 00 00 00 03 00 00 01 00 00 00 -- 2............... 04 00 00 01 00 00 00 05 00 00 01 00 00 00 11 00 -- ................ 00 01 00 00 00 00 00 05 01 01 01 00 01 40 00 00 -- .............@.. 01 00 00 00 AE 87 5E 86 -- ......^. 2021-12-05 10:29:14.287 - silly: e3dc-rscp.0 (15335) Successfully written data to socket 2021-12-05 10:29:14.292 - silly: e3dc-rscp.0 (15335) Received response 2021-12-05 10:29:14.293 - silly: e3dc-rscp.0 (15335) TAG_EMS_POWER_BAT 2021-12-05 10:29:14.293 - silly: e3dc-rscp.0 (15335) IN: magic: >E3DC< is OK - ctrl: >0011< is OK - Version 1, with CRC - seconds: 1638696555 - nseconds: 332910000 - length: 77 TAG_EMS_POWER_BAT - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_POWER_HOME - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_POWER_GRID - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_POWER_ADD - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_MODE - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_ALIVE - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_STATUS - type: 0xFF - Error - length: 4 value: 2 no CRC32 2021-12-05 10:29:14.293 - silly: e3dc-rscp.0 (15335) E3 DC 00 11 6B 86 AC 61 00 00 00 00 B0 CD D7 13 -- ....k..a........ 4D 00 02 00 80 01 FF 04 00 02 00 00 00 03 00 80 -- M............... 01 FF 04 00 02 00 00 00 04 00 80 01 FF 04 00 02 -- ................ 00 00 00 05 00 80 01 FF 04 00 02 00 00 00 11 00 -- ................ 80 01 FF 04 00 02 00 00 00 00 00 85 01 FF 04 00 -- ................ 02 00 00 00 40 00 80 01 FF 04 00 02 00 00 00 B9 -- ....@........... 72 E0 46 00 00 00 00 00 00 00 00 00 00 00 00 00 -- r.F............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -- ................ 2021-12-05 10:29:14.294 - silly: e3dc-rscp.0 (15335) processTree: path = , tree = [ {TAG_EMS_POWER_BAT(Error) = 2}, {TAG_EMS_POWER_HOME(Error) = 2}, {TAG_EMS_POWER_GRID(Error) = 2}, {TAG_EMS_POWER_ADD(Error) = 2}, {TAG_EMS_MODE(Error) = 2}, {TAG_EMS_ALIVE(Error) = 2}, {TAG_EMS_STATUS(Error) = 2}, ] 2021-12-05 10:29:14.294 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_BAT (0x1800002) 2021-12-05 10:29:14.294 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_HOME (0x1800003) 2021-12-05 10:29:14.294 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_GRID (0x1800004) 2021-12-05 10:29:14.294 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_ADD (0x1800005) 2021-12-05 10:29:14.295 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_MODE (0x1800011) 2021-12-05 10:29:14.295 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_ALIVE (0x1850000) 2021-12-05 10:29:14.295 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_STATUS (0x1800040) 2021-12-05 10:29:14.295 - silly: e3dc-rscp.0 (15335) Message queue is empty 2021-12-05 10:29:44.276 - debug: e3dc-rscp.0 (15335) Sending request TAG_EMS_REQ_GET_POWER_SETTINGS 2021-12-05 10:29:44.277 - silly: e3dc-rscp.0 (15335) OUT: magic: >E3DC< is OK - ctrl: >0011< is OK - Version 1, with CRC - seconds: 1638696584 - nseconds: 0 - length: 133 TAG_EMS_REQ_GET_POWER_SETTINGS - type: 0x00 - None - length: 0 TAG_EMS_REQ_BAT_SOC - type: 0x00 - None - length: 0 TAG_EMS_REQ_AUTARKY - type: 0x00 - None - length: 0 TAG_EMS_REQ_SELF_CONSUMPTION - type: 0x00 - None - length: 0 TAG_EMS_REQ_POWER_WB_ALL - type: 0x00 - None - length: 0 TAG_EMS_REQ_POWER_WB_SOLAR - type: 0x00 - None - length: 0 TAG_EMS_REQ_GET_MANUAL_CHARGE - type: 0x00 - None - length: 0 TAG_EMS_REQ_USED_CHARGE_LIMIT - type: 0x00 - None - length: 0 TAG_EMS_REQ_USER_CHARGE_LIMIT - type: 0x00 - None - length: 0 TAG_EMS_REQ_BAT_CHARGE_LIMIT - type: 0x00 - None - length: 0 TAG_EMS_REQ_DCDC_CHARGE_LIMIT - type: 0x00 - None - length: 0 TAG_EMS_REQ_USED_DISCHARGE_LIMIT - type: 0x00 - None - length: 0 TAG_EMS_REQ_USER_DISCHARGE_LIMIT - type: 0x00 - None - length: 0 TAG_EMS_REQ_BAT_DISCHARGE_LIMIT - type: 0x00 - None - length: 0 TAG_EMS_REQ_DCDC_DISCHARGE_LIMIT - type: 0x00 - None - length: 0 TAG_EMS_REQ_REMAINING_BAT_CHARGE_POWER - type: 0x00 - None - length: 0 TAG_EMS_REQ_REMAINING_BAT_DISCHARGE_POWER - type: 0x00 - None - length: 0 TAG_EMS_REQ_EMERGENCY_POWER_STATUS - type: 0x00 - None - length: 0 TAG_EMS_REQ_EMERGENCYPOWER_TEST_STATUS - type: 0x00 - None - length: 0 CRC32 2021-12-05 10:29:44.277 - silly: e3dc-rscp.0 (15335) E3 DC 00 11 88 86 AC 61 00 00 00 00 00 00 00 00 -- .......a........ 85 00 8B 00 00 01 00 00 00 08 00 00 01 00 00 00 -- ................ 06 00 00 01 00 00 00 07 00 00 01 00 00 00 1F 00 -- ................ 00 01 00 00 00 20 00 00 01 00 00 00 8E 00 00 01 -- ..... .......... 00 00 00 41 00 00 01 00 00 00 44 00 00 01 00 00 -- ...A......D..... 00 42 00 00 01 00 00 00 43 00 00 01 00 00 00 45 -- .B......C......E 00 00 01 00 00 00 48 00 00 01 00 00 00 46 00 00 -- ......H......F.. 01 00 00 00 47 00 00 01 00 00 00 71 00 00 01 00 -- ....G......q.... 00 00 72 00 00 01 00 00 00 73 00 00 01 00 00 00 -- ..r......s...... 93 00 00 01 00 00 00 73 61 68 8E -- .......sah. 2021-12-05 10:29:44.281 - silly: e3dc-rscp.0 (15335) Successfully written data to socket 2021-12-05 10:29:44.284 - debug: e3dc-rscp.0 (15335) Sending request TAG_EP_REQ_IS_READY_FOR_SWITCH 2021-12-05 10:29:44.284 - silly: e3dc-rscp.0 (15335) OUT: magic: >E3DC< is OK - ctrl: >0011< is OK - Version 1, with CRC - seconds: 1638696584 - nseconds: 0 - length: 35 TAG_EP_REQ_IS_READY_FOR_SWITCH - type: 0x00 - None - length: 0 TAG_EP_REQ_IS_GRID_CONNECTED - type: 0x00 - None - length: 0 TAG_EP_REQ_IS_ISLAND_GRID - type: 0x00 - None - length: 0 TAG_EP_REQ_IS_POSSIBLE - type: 0x00 - None - length: 0 TAG_EP_REQ_IS_INVALID_STATE - type: 0x00 - None - length: 0 CRC32 2021-12-05 10:29:44.285 - silly: e3dc-rscp.0 (15335) E3 DC 00 11 88 86 AC 61 00 00 00 00 00 00 00 00 -- .......a........ 23 00 03 00 00 0B 00 00 00 04 00 00 0B 00 00 00 -- #............... 05 00 00 0B 00 00 00 07 00 00 0B 00 00 00 06 00 -- ................ 00 0B 00 00 00 B9 0C DC 25 -- ........% 2021-12-05 10:29:44.285 - silly: e3dc-rscp.0 (15335) Successfully written data to socket 2021-12-05 10:29:44.298 - silly: e3dc-rscp.0 (15335) Received response 2021-12-05 10:29:44.298 - silly: e3dc-rscp.0 (15335) TAG_EMS_GET_POWER_SETTINGS 2021-12-05 10:29:44.299 - silly: e3dc-rscp.0 (15335) IN: magic: >E3DC< is OK - ctrl: >0011< is OK - Version 1, with CRC - seconds: 1638696585 - nseconds: 328697000 - length: 209 TAG_EMS_GET_POWER_SETTINGS - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_BAT_SOC - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_AUTARKY - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_SELF_CONSUMPTION - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_POWER_WB_ALL - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_POWER_WB_SOLAR - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_GET_MANUAL_CHARGE - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_USED_CHARGE_LIMIT - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_USER_CHARGE_LIMIT - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_BAT_CHARGE_LIMIT - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_DCDC_CHARGE_LIMIT - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_USED_DISCHARGE_LIMIT - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_USER_DISCHARGE_LIMIT - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_BAT_DISCHARGE_LIMIT - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_DCDC_DISCHARGE_LIMIT - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_REMAINING_BAT_CHARGE_POWER - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_REMAINING_BAT_DISCHARGE_POWER - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_EMERGENCY_POWER_STATUS - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_EMERGENCYPOWER_TEST_STATUS - type: 0xFF - Error - length: 4 value: 2 no CRC32 2021-12-05 10:29:44.299 - silly: e3dc-rscp.0 (15335) E3 DC 00 11 89 86 AC 61 00 00 00 00 A8 84 97 13 -- .......a........ D1 00 8B 00 80 01 FF 04 00 02 00 00 00 08 00 80 -- ................ 01 FF 04 00 02 00 00 00 06 00 80 01 FF 04 00 02 -- ................ 00 00 00 07 00 80 01 FF 04 00 02 00 00 00 1F 00 -- ................ 80 01 FF 04 00 02 00 00 00 20 00 80 01 FF 04 00 -- ......... ...... 02 00 00 00 8E 00 80 01 FF 04 00 02 00 00 00 41 -- ...............A 00 80 01 FF 04 00 02 00 00 00 44 00 80 01 FF 04 -- ..........D..... 00 02 00 00 00 42 00 80 01 FF 04 00 02 00 00 00 -- .....B.......... 43 00 80 01 FF 04 00 02 00 00 00 45 00 80 01 FF -- C..........E.... 04 00 02 00 00 00 48 00 80 01 FF 04 00 02 00 00 -- ......H......... 00 46 00 80 01 FF 04 00 02 00 00 00 47 00 80 01 -- .F..........G... FF 04 00 02 00 00 00 71 00 80 01 FF 04 00 02 00 -- .......q........ 00 00 72 00 80 01 FF 04 00 02 00 00 00 73 00 80 -- ..r..........s.. 01 FF 04 00 02 00 00 00 93 00 80 01 FF 04 00 02 -- ................ 00 00 00 32 06 85 72 00 00 00 00 00 00 00 00 00 -- ...2..r......... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -- ................ 2021-12-05 10:29:44.300 - silly: e3dc-rscp.0 (15335) processTree: path = , tree = [ {TAG_EMS_GET_POWER_SETTINGS(Error) = 2}, {TAG_EMS_BAT_SOC(Error) = 2}, {TAG_EMS_AUTARKY(Error) = 2}, {TAG_EMS_SELF_CONSUMPTION(Error) = 2}, {TAG_EMS_POWER_WB_ALL(Error) = 2}, {TAG_EMS_POWER_WB_SOLAR(Error) = 2}, {TAG_EMS_GET_MANUAL_CHARGE(Error) = 2}, {TAG_EMS_USED_CHARGE_LIMIT(Error) = 2}, {TAG_EMS_USER_CHARGE_LIMIT(Error) = 2}, {TAG_EMS_BAT_CHARGE_LIMIT(Error) = 2}, {TAG_EMS_DCDC_CHARGE_LIMIT(Error) = 2}, {TAG_EMS_USED_DISCHARGE_LIMIT(Error) = 2}, {TAG_EMS_USER_DISCHARGE_LIMIT(Error) = 2}, {TAG_EMS_BAT_DISCHARGE_LIMIT(Error) = 2}, {TAG_EMS_DCDC_DISCHARGE_LIMIT(Error) = 2}, {TAG_EMS_REMAINING_BAT_CHARGE_POWER(Error) = 2}, {TAG_EMS_REMAINING_BAT_DISCHARGE_POWER(Error) = 2}, {TAG_EMS_EMERGENCY_POWER_STATUS(Error) = 2}, {TAG_EMS_EMERGENCYPOWER_TEST_STATUS(Error) = 2}, ] 2021-12-05 10:29:44.300 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_GET_POWER_SETTINGS (0x180008b) 2021-12-05 10:29:44.300 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_BAT_SOC (0x1800008) 2021-12-05 10:29:44.301 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_AUTARKY (0x1800006) 2021-12-05 10:29:44.301 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_SELF_CONSUMPTION (0x1800007) 2021-12-05 10:29:44.301 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_WB_ALL (0x180001f) 2021-12-05 10:29:44.301 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_WB_SOLAR (0x1800020) 2021-12-05 10:29:44.301 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_GET_MANUAL_CHARGE (0x180008e) 2021-12-05 10:29:44.302 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_USED_CHARGE_LIMIT (0x1800041) 2021-12-05 10:29:44.302 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_USER_CHARGE_LIMIT (0x1800044) 2021-12-05 10:29:44.302 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_BAT_CHARGE_LIMIT (0x1800042) 2021-12-05 10:29:44.302 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_DCDC_CHARGE_LIMIT (0x1800043) 2021-12-05 10:29:44.303 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_USED_DISCHARGE_LIMIT (0x1800045) 2021-12-05 10:29:44.303 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_USER_DISCHARGE_LIMIT (0x1800048) 2021-12-05 10:29:44.303 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_BAT_DISCHARGE_LIMIT (0x1800046) 2021-12-05 10:29:44.303 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_DCDC_DISCHARGE_LIMIT (0x1800047) 2021-12-05 10:29:44.304 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_REMAINING_BAT_CHARGE_POWER (0x1800071) 2021-12-05 10:29:44.304 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_REMAINING_BAT_DISCHARGE_POWER (0x1800072) 2021-12-05 10:29:44.304 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_EMERGENCY_POWER_STATUS (0x1800073) 2021-12-05 10:29:44.304 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_EMERGENCYPOWER_TEST_STATUS (0x1800093) 2021-12-05 10:29:44.304 - debug: e3dc-rscp.0 (15335) Sending request TAG_EMS_REQ_POWER_BAT 2021-12-05 10:29:44.305 - silly: e3dc-rscp.0 (15335) OUT: magic: >E3DC< is OK - ctrl: >0011< is OK - Version 1, with CRC - seconds: 1638696584 - nseconds: 0 - length: 50 TAG_EMS_REQ_POWER_BAT - type: 0x00 - None - length: 0 TAG_EMS_REQ_POWER_HOME - type: 0x00 - None - length: 0 TAG_EMS_REQ_POWER_GRID - type: 0x00 - None - length: 0 TAG_EMS_REQ_POWER_ADD - type: 0x00 - None - length: 0 TAG_EMS_REQ_MODE - type: 0x00 - None - length: 0 TAG_EMS_REQ_ALIVE - type: 0x01 - Bool - length: 1 value: 0x01 TAG_EMS_REQ_STATUS - type: 0x00 - None - length: 0 CRC32 2021-12-05 10:29:44.305 - silly: e3dc-rscp.0 (15335) E3 DC 00 11 88 86 AC 61 00 00 00 00 00 00 00 00 -- .......a........ 32 00 02 00 00 01 00 00 00 03 00 00 01 00 00 00 -- 2............... 04 00 00 01 00 00 00 05 00 00 01 00 00 00 11 00 -- ................ 00 01 00 00 00 00 00 05 01 01 01 00 01 40 00 00 -- .............@.. 01 00 00 00 67 5B 9E 98 -- ....g[.. 2021-12-05 10:29:44.306 - silly: e3dc-rscp.0 (15335) Successfully written data to socket 2021-12-05 10:29:44.340 - silly: e3dc-rscp.0 (15335) Received response 2021-12-05 10:29:44.340 - silly: e3dc-rscp.0 (15335) TAG_EP_IS_READY_FOR_SWITCH 2021-12-05 10:29:44.341 - silly: e3dc-rscp.0 (15335) IN: magic: >E3DC< is OK - ctrl: >0011< is OK - Version 1, with CRC - seconds: 1638696585 - nseconds: 334903000 - length: 55 TAG_EP_IS_READY_FOR_SWITCH - type: 0xFF - Error - length: 4 value: 2 TAG_EP_IS_GRID_CONNECTED - type: 0xFF - Error - length: 4 value: 2 TAG_EP_IS_ISLAND_GRID - type: 0xFF - Error - length: 4 value: 2 TAG_EP_IS_POSSIBLE - type: 0xFF - Error - length: 4 value: 2 TAG_EP_IS_INVALID_STATE - type: 0xFF - Error - length: 4 value: 2 no CRC32 2021-12-05 10:29:44.341 - silly: e3dc-rscp.0 (15335) E3 DC 00 11 89 86 AC 61 00 00 00 00 D8 36 F6 13 -- .......a.....6.. 37 00 03 00 80 0B FF 04 00 02 00 00 00 04 00 80 -- 7............... 0B FF 04 00 02 00 00 00 05 00 80 0B FF 04 00 02 -- ................ 00 00 00 07 00 80 0B FF 04 00 02 00 00 00 06 00 -- ................ 80 0B FF 04 00 02 00 00 00 0F C6 75 A8 00 00 00 -- ...........u.... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -- ................ E3 DC 00 11 89 86 AC 61 00 00 00 00 F0 93 48 15 -- .......a......H. 4D 00 02 00 80 01 FF 04 00 02 00 00 00 03 00 80 -- M............... 01 FF 04 00 02 00 00 00 04 00 80 01 FF 04 00 02 -- ................ 00 00 00 05 00 80 01 FF 04 00 02 00 00 00 11 00 -- ................ 80 01 FF 04 00 02 00 00 00 00 00 85 01 FF 04 00 -- ................ 02 00 00 00 40 00 80 01 FF 04 00 02 00 00 00 8E -- ....@........... 21 24 9E 00 00 00 00 00 00 00 00 00 00 00 00 00 -- !$.............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -- ................ 2021-12-05 10:29:44.342 - silly: e3dc-rscp.0 (15335) processTree: path = , tree = [ {TAG_EP_IS_READY_FOR_SWITCH(Error) = 2}, {TAG_EP_IS_GRID_CONNECTED(Error) = 2}, {TAG_EP_IS_ISLAND_GRID(Error) = 2}, {TAG_EP_IS_POSSIBLE(Error) = 2}, {TAG_EP_IS_INVALID_STATE(Error) = 2}, ] 2021-12-05 10:29:44.342 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EP_IS_READY_FOR_SWITCH (0xb800003) 2021-12-05 10:29:44.342 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EP_IS_GRID_CONNECTED (0xb800004) 2021-12-05 10:29:44.342 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EP_IS_ISLAND_GRID (0xb800005) 2021-12-05 10:29:44.343 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EP_IS_POSSIBLE (0xb800007) 2021-12-05 10:29:44.343 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EP_IS_INVALID_STATE (0xb800006) 2021-12-05 10:29:44.343 - silly: e3dc-rscp.0 (15335) Message queue is empty 2021-12-05 10:30:00.213 - info: host.iobroker instance system.adapter.dwd.0 started with pid 15663 2021-12-05 10:30:04.700 - info: host.iobroker instance system.adapter.ical.0 started with pid 15674 2021-12-05 10:30:12.163 - info: host.iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2021-12-05 10:30:14.285 - debug: e3dc-rscp.0 (15335) Sending request TAG_EMS_REQ_POWER_BAT 2021-12-05 10:30:14.286 - silly: e3dc-rscp.0 (15335) OUT: magic: >E3DC< is OK - ctrl: >0011< is OK - Version 1, with CRC - seconds: 1638696614 - nseconds: 0 - length: 50 TAG_EMS_REQ_POWER_BAT - type: 0x00 - None - length: 0 TAG_EMS_REQ_POWER_HOME - type: 0x00 - None - length: 0 TAG_EMS_REQ_POWER_GRID - type: 0x00 - None - length: 0 TAG_EMS_REQ_POWER_ADD - type: 0x00 - None - length: 0 TAG_EMS_REQ_MODE - type: 0x00 - None - length: 0 TAG_EMS_REQ_ALIVE - type: 0x01 - Bool - length: 1 value: 0x01 TAG_EMS_REQ_STATUS - type: 0x00 - None - length: 0 CRC32 2021-12-05 10:30:14.287 - silly: e3dc-rscp.0 (15335) E3 DC 00 11 A6 86 AC 61 00 00 00 00 00 00 00 00 -- .......a........ 32 00 02 00 00 01 00 00 00 03 00 00 01 00 00 00 -- 2............... 04 00 00 01 00 00 00 05 00 00 01 00 00 00 11 00 -- ................ 00 01 00 00 00 00 00 05 01 01 01 00 01 40 00 00 -- .............@.. 01 00 00 00 CE 2D E3 49 -- .....-.I 2021-12-05 10:30:14.292 - silly: e3dc-rscp.0 (15335) Successfully written data to socket 2021-12-05 10:30:14.299 - silly: e3dc-rscp.0 (15335) Received response 2021-12-05 10:30:14.300 - silly: e3dc-rscp.0 (15335) TAG_EMS_POWER_BAT 2021-12-05 10:30:14.302 - silly: e3dc-rscp.0 (15335) IN: magic: >E3DC< is OK - ctrl: >0011< is OK - Version 1, with CRC - seconds: 1638696615 - nseconds: 338877000 - length: 77 TAG_EMS_POWER_BAT - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_POWER_HOME - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_POWER_GRID - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_POWER_ADD - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_MODE - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_ALIVE - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_STATUS - type: 0xFF - Error - length: 4 value: 2 no CRC32 2021-12-05 10:30:14.303 - silly: e3dc-rscp.0 (15335) E3 DC 00 11 A7 86 AC 61 00 00 00 00 48 DA 32 14 -- .......a....H.2. 4D 00 02 00 80 01 FF 04 00 02 00 00 00 03 00 80 -- M............... 01 FF 04 00 02 00 00 00 04 00 80 01 FF 04 00 02 -- ................ 00 00 00 05 00 80 01 FF 04 00 02 00 00 00 11 00 -- ................ 80 01 FF 04 00 02 00 00 00 00 00 85 01 FF 04 00 -- ................ 02 00 00 00 40 00 80 01 FF 04 00 02 00 00 00 E6 -- ....@........... 81 2C 0D 00 00 00 00 00 00 00 00 00 00 00 00 00 -- .,.............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -- ................ 2021-12-05 10:30:14.305 - silly: e3dc-rscp.0 (15335) processTree: path = , tree = [ {TAG_EMS_POWER_BAT(Error) = 2}, {TAG_EMS_POWER_HOME(Error) = 2}, {TAG_EMS_POWER_GRID(Error) = 2}, {TAG_EMS_POWER_ADD(Error) = 2}, {TAG_EMS_MODE(Error) = 2}, {TAG_EMS_ALIVE(Error) = 2}, {TAG_EMS_STATUS(Error) = 2}, ] 2021-12-05 10:30:14.306 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_BAT (0x1800002) 2021-12-05 10:30:14.307 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_HOME (0x1800003) 2021-12-05 10:30:14.308 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_GRID (0x1800004) 2021-12-05 10:30:14.310 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_ADD (0x1800005) 2021-12-05 10:30:14.311 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_MODE (0x1800011) 2021-12-05 10:30:14.312 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_ALIVE (0x1850000) 2021-12-05 10:30:14.312 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_STATUS (0x1800040) 2021-12-05 10:30:14.313 - silly: e3dc-rscp.0 (15335) Message queue is empty 2021-12-05 10:30:20.283 - info: host.iobroker instance system.adapter.ical.0 terminated with code 0 (NO_ERROR) 2021-12-05 10:30:44.285 - debug: e3dc-rscp.0 (15335) Sending request TAG_EMS_REQ_POWER_BAT 2021-12-05 10:30:44.285 - silly: e3dc-rscp.0 (15335) OUT: magic: >E3DC< is OK - ctrl: >0011< is OK - Version 1, with CRC - seconds: 1638696644 - nseconds: 0 - length: 50 TAG_EMS_REQ_POWER_BAT - type: 0x00 - None - length: 0 TAG_EMS_REQ_POWER_HOME - type: 0x00 - None - length: 0 TAG_EMS_REQ_POWER_GRID - type: 0x00 - None - length: 0 TAG_EMS_REQ_POWER_ADD - type: 0x00 - None - length: 0 TAG_EMS_REQ_MODE - type: 0x00 - None - length: 0 TAG_EMS_REQ_ALIVE - type: 0x01 - Bool - length: 1 value: 0x01 TAG_EMS_REQ_STATUS - type: 0x00 - None - length: 0 CRC32 2021-12-05 10:30:44.286 - silly: e3dc-rscp.0 (15335) E3 DC 00 11 C4 86 AC 61 00 00 00 00 00 00 00 00 -- .......a........ 32 00 02 00 00 01 00 00 00 03 00 00 01 00 00 00 -- 2............... 04 00 00 01 00 00 00 05 00 00 01 00 00 00 11 00 -- ................ 00 01 00 00 00 00 00 05 01 01 01 00 01 40 00 00 -- .............@.. 01 00 00 00 69 44 7A 7F -- ....iDz. 2021-12-05 10:30:44.286 - silly: e3dc-rscp.0 (15335) Successfully written data to socket 2021-12-05 10:30:44.296 - silly: e3dc-rscp.0 (15335) Received response 2021-12-05 10:30:44.296 - silly: e3dc-rscp.0 (15335) TAG_EMS_POWER_BAT 2021-12-05 10:30:44.297 - silly: e3dc-rscp.0 (15335) IN: magic: >E3DC< is OK - ctrl: >0011< is OK - Version 1, with CRC - seconds: 1638696645 - nseconds: 338195000 - length: 77 TAG_EMS_POWER_BAT - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_POWER_HOME - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_POWER_GRID - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_POWER_ADD - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_MODE - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_ALIVE - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_STATUS - type: 0xFF - Error - length: 4 value: 2 no CRC32 2021-12-05 10:30:44.297 - silly: e3dc-rscp.0 (15335) E3 DC 00 11 C5 86 AC 61 00 00 00 00 38 72 28 14 -- .......a....8r(. 4D 00 02 00 80 01 FF 04 00 02 00 00 00 03 00 80 -- M............... 01 FF 04 00 02 00 00 00 04 00 80 01 FF 04 00 02 -- ................ 00 00 00 05 00 80 01 FF 04 00 02 00 00 00 11 00 -- ................ 80 01 FF 04 00 02 00 00 00 00 00 85 01 FF 04 00 -- ................ 02 00 00 00 40 00 80 01 FF 04 00 02 00 00 00 C1 -- ....@........... 25 8D AA 00 00 00 00 00 00 00 00 00 00 00 00 00 -- %............... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -- ................ 2021-12-05 10:30:44.297 - silly: e3dc-rscp.0 (15335) processTree: path = , tree = [ {TAG_EMS_POWER_BAT(Error) = 2}, {TAG_EMS_POWER_HOME(Error) = 2}, {TAG_EMS_POWER_GRID(Error) = 2}, {TAG_EMS_POWER_ADD(Error) = 2}, {TAG_EMS_MODE(Error) = 2}, {TAG_EMS_ALIVE(Error) = 2}, {TAG_EMS_STATUS(Error) = 2}, ] 2021-12-05 10:30:44.298 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_BAT (0x1800002) 2021-12-05 10:30:44.298 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_HOME (0x1800003) 2021-12-05 10:30:44.298 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_GRID (0x1800004) 2021-12-05 10:30:44.298 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_ADD (0x1800005) 2021-12-05 10:30:44.298 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_MODE (0x1800011) 2021-12-05 10:30:44.299 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_ALIVE (0x1850000) 2021-12-05 10:30:44.299 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_STATUS (0x1800040) 2021-12-05 10:30:44.299 - silly: e3dc-rscp.0 (15335) Message queue is empty 2021-12-05 10:31:14.284 - debug: e3dc-rscp.0 (15335) Sending request TAG_EMS_REQ_POWER_BAT 2021-12-05 10:31:14.285 - silly: e3dc-rscp.0 (15335) OUT: magic: >E3DC< is OK - ctrl: >0011< is OK - Version 1, with CRC - seconds: 1638696674 - nseconds: 0 - length: 50 TAG_EMS_REQ_POWER_BAT - type: 0x00 - None - length: 0 TAG_EMS_REQ_POWER_HOME - type: 0x00 - None - length: 0 TAG_EMS_REQ_POWER_GRID - type: 0x00 - None - length: 0 TAG_EMS_REQ_POWER_ADD - type: 0x00 - None - length: 0 TAG_EMS_REQ_MODE - type: 0x00 - None - length: 0 TAG_EMS_REQ_ALIVE - type: 0x01 - Bool - length: 1 value: 0x01 TAG_EMS_REQ_STATUS - type: 0x00 - None - length: 0 CRC32 2021-12-05 10:31:14.285 - silly: e3dc-rscp.0 (15335) E3 DC 00 11 E2 86 AC 61 00 00 00 00 00 00 00 00 -- .......a........ 32 00 02 00 00 01 00 00 00 03 00 00 01 00 00 00 -- 2............... 04 00 00 01 00 00 00 05 00 00 01 00 00 00 11 00 -- ................ 00 01 00 00 00 00 00 05 01 01 01 00 01 40 00 00 -- .............@.. 01 00 00 00 EE 4B 88 0C -- .....K.. 2021-12-05 10:31:14.286 - silly: e3dc-rscp.0 (15335) Successfully written data to socket 2021-12-05 10:31:14.293 - silly: e3dc-rscp.0 (15335) Received response 2021-12-05 10:31:14.293 - silly: e3dc-rscp.0 (15335) TAG_EMS_POWER_BAT 2021-12-05 10:31:14.295 - silly: e3dc-rscp.0 (15335) IN: magic: >E3DC< is OK - ctrl: >0011< is OK - Version 1, with CRC - seconds: 1638696675 - nseconds: 336125000 - length: 77 TAG_EMS_POWER_BAT - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_POWER_HOME - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_POWER_GRID - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_POWER_ADD - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_MODE - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_ALIVE - type: 0xFF - Error - length: 4 value: 2 TAG_EMS_STATUS - type: 0xFF - Error - length: 4 value: 2 no CRC32 2021-12-05 10:31:14.295 - silly: e3dc-rscp.0 (15335) E3 DC 00 11 E3 86 AC 61 00 00 00 00 48 DC 08 14 -- .......a....H... 4D 00 02 00 80 01 FF 04 00 02 00 00 00 03 00 80 -- M............... 01 FF 04 00 02 00 00 00 04 00 80 01 FF 04 00 02 -- ................ 00 00 00 05 00 80 01 FF 04 00 02 00 00 00 11 00 -- ................ 80 01 FF 04 00 02 00 00 00 00 00 85 01 FF 04 00 -- ................ 02 00 00 00 40 00 80 01 FF 04 00 02 00 00 00 5D -- ....@..........] 88 4D 7F 00 00 00 00 00 00 00 00 00 00 00 00 00 -- .M.............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -- ................ 2021-12-05 10:31:14.295 - silly: e3dc-rscp.0 (15335) processTree: path = , tree = [ {TAG_EMS_POWER_BAT(Error) = 2}, {TAG_EMS_POWER_HOME(Error) = 2}, {TAG_EMS_POWER_GRID(Error) = 2}, {TAG_EMS_POWER_ADD(Error) = 2}, {TAG_EMS_MODE(Error) = 2}, {TAG_EMS_ALIVE(Error) = 2}, {TAG_EMS_STATUS(Error) = 2}, ] 2021-12-05 10:31:14.296 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_BAT (0x1800002) 2021-12-05 10:31:14.296 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_HOME (0x1800003) 2021-12-05 10:31:14.296 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_GRID (0x1800004) 2021-12-05 10:31:14.296 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_POWER_ADD (0x1800005) 2021-12-05 10:31:14.297 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_MODE (0x1800011) 2021-12-05 10:31:14.297 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_ALIVE (0x1850000) 2021-12-05 10:31:14.297 - warn: e3dc-rscp.0 (15335) Received data type ERROR: RSCP_ERR_ACCESS_DENIED (2) - tag TAG_EMS_STATUS (0x1800040) 2021-12-05 10:31:14.297 - silly: e3dc-rscp.0 (15335) Message queue is emptyNachtrag:
Habe das Passwort falsch eingegeben
-
Hinweis: es wird jetzt vsl. einige Releases zur Fehlerbereinigung für die WB-Tags geben...
0.0.16-beta
- Bugfix: Wallbox count (WB_CONNECTED_DEVICES) was not handled correctly.
- Bugfix: name for 3 SET_POWER objects is now displayed.
- Bugfix: removed needless vertical scrollbar from configuration page (index_m.html).
-
0.0.16-beta installiert.
Es werden keine States unter WB angelegt.
LOG Silly:2021-12-05 10:42:52.016 - debug: e3dc-rscp.0 (16517) Sending request TAG_WB_REQ_CONNECTED_DEVICES 2021-12-05 10:42:52.016 - silly: e3dc-rscp.0 (16517) OUT: magic: >E3DC< is OK - ctrl: >0011< is OK - Version 1, with CRC - seconds: 1638697371 - nseconds: 0 - length: 7 TAG_WB_REQ_CONNECTED_DEVICES - type: 0x00 - None - length: 0 CRC32 2021-12-05 10:42:52.016 - silly: e3dc-rscp.0 (16517) E3 DC 00 11 9B 89 AC 61 00 00 00 00 00 00 00 00 -- .......a........ 07 00 1C 10 04 0E 00 00 00 43 81 74 59 -- .........C.tY 2021-12-05 10:42:52.017 - silly: e3dc-rscp.0 (16517) Successfully written data to socket 2021-12-05 10:42:52.034 - silly: e3dc-rscp.0 (16517) Received response 2021-12-05 10:42:52.035 - silly: e3dc-rscp.0 (16517) TAG_WB_CONNECTED_DEVICES 2021-12-05 10:42:52.035 - silly: e3dc-rscp.0 (16517) IN: magic: >E3DC< is OK - ctrl: >0011< is OK - Version 1, with CRC - seconds: 1638697373 - nseconds: 84939000 - length: 18 TAG_WB_CONNECTED_DEVICES - type: 0x0E - Container - length: 11 TAG_WB_INDEX - type: 0x06 - Int32 - length: 4 value: 0 no CRC32 2021-12-05 10:42:52.035 - silly: e3dc-rscp.0 (16517) E3 DC 00 11 9D 89 AC 61 00 00 00 00 F8 10 10 05 -- .......a........ 12 00 1C 10 84 0E 0E 0B 00 01 00 04 0E 06 04 00 -- ................ 00 00 00 00 07 AF BA 54 00 00 00 00 00 00 00 00 -- .......T........ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 -- ................ 2021-12-05 10:42:52.036 - silly: e3dc-rscp.0 (16517) processTree: path = , tree = [ {TAG_WB_CONNECTED_DEVICES(Container) = [ {TAG_WB_INDEX(Int32) = 0}, ]}, ] 2021-12-05 10:42:52.036 - silly: e3dc-rscp.0 (16517) processTree: path = , tree = [ {TAG_WB_INDEX(Int32) = 0}, ] 2021-12-05 10:42:52.036 - silly: e3dc-rscp.0 (16517) Message queue is emptyUli ich kann diesen Tag "TAG_WB_REQ_CONNECTED_DEVICES" auch nicht in der Tag liste finden. Habe dort nur "TAG_WB_DEVICE_CONNECTED" finden können. Bist du sicher das es so richtig ist ?
-
Danke für das Log, das hilft!
Das Tag TAG_WB_REQ_CONNECTED_DEVICES habe ich aus dem RscpGUI (rxhan) abgekupfert.
Aber da kommt ja (anders als erwartet) ein Container zurück, den muss ich erstmal auflösen und den größten Index-Wert abspeichern.Also ihr braucht WB erstmal nicht weiter testen bis zum nächsten Bugfix.
-
Hier der Fix:
https://github.com/git-kick/ioBroker.e3dc-rscp/tree/v0.0.16-beta2@arnod, kannst du bitte nochmal testen? Jetzt sollte ein WB_0 angelegt werden, nachdem der WB_CONNECTED_DEVICES Container eingetroffen ist.
(Bin nicht sicher, ob dieser Weg der "blinden Entwicklung" uns hinreichend voranbringt - sagt Bescheid, wenn Euch das zu lästig wird.)
-
@arnod sagte in Test Adapter e3dc-rscp v0.0.x GitHub:
e3dc-rscp.0.EMS.BALANCED_PHASES = 7
Mit dem Wert kann ich nichts anfange, dachte immer ich hätte nur 3 Phasen Weiß jemand mehr darüber?Habe jetzt in der Tag Liste nach Phases gesucht und folgendes unter dem Tag "TAG_PM_ACTIVE_PHASES" gefunden:
//just the three lowest bits of activePhases are used to define / //what phase is switched on. If the lowest bit is 1 phase1 is active / //if the lowest bit is 0 phase 1 is inactive ... / static const unsigned char PHASE_1 = 1 / static const unsigned char PHASE_2 = 2 / static const unsigned char PHASE_3 = 4 / f.e. if active Phases = 7 -> all phases are activeDemnach würde das Ganze so aussehn:
1 = L1
2 = L2
3 = L1 und L2
4 = L3
5 = L1 und L3
6 = L2 und L3
7 = L1, L2, L3Das würde bei mir auch zutreffen mit 7
