NEWS
ZigBee neue Version 1.4.4
-
@asgothian sagte in ZigBee neue Version 1.4.4:
Welche Firmware hast du auf dem Board ?
ne daran wird es nicht leigen da ist die 20200211..aber hier mach ich mir sorgen es ist ein Linux system
Error: Error while opening serialport 'Error: Opening COM4: Access denied'@klassisch hast du js-controller update gemacht ??
@Yodameister lese bitte nochmal den Eingangsbeitrag ich habe da ein Nachtrag verfasst
@arteck
@Nachtrag da es hier zu vielen Fragen kommt
die batteriebenen Geräte .. diese müssen sich erst melden. das dauert da sich diese selten Melden vor allem Aqara bzw. Xiaomi .. man kann es selbst antrigern per drücken des Knopfes am Gerät. erst dann sieht man die richtige Link Quality..Ich hatte 1 Tag dazwischen und zb der Bewegungsmelder wurde bewusst mehrfach angesteuert , hätte sich also melden müssen , passierte trotzdem nichts , das mit der LinkQualität von 10 war mir aufgefallen , ging aber schnell weg
-
@asgothian sagte in ZigBee neue Version 1.4.4:
Welche Firmware hast du auf dem Board ?
ne daran wird es nicht leigen da ist die 20200211..aber hier mach ich mir sorgen es ist ein Linux system
Error: Error while opening serialport 'Error: Opening COM4: Access denied'@klassisch hast du js-controller update gemacht ??
@Yodameister lese bitte nochmal den Eingangsbeitrag ich habe da ein Nachtrag verfasst
@arteck sagte in ZigBee neue Version 1.4.4:
@asgothian sagte in ZigBee neue Version 1.4.4:
Welche Firmware hast du auf dem Board ?
Der Controller-Tag sagt
type:zStack30x version:2-2.2.7.2. revision:20200211 port:COM4 channel:11ne daran wird es nicht leigen da ist die 20200211..aber hier mach ich mir sorgen es ist ein Linux system
Error: Error while opening serialport 'Error: Opening COM4: Access denied'Mein ioBroker laptop hat Win 10 Pro drauf. Win 10 kommt mit USBs problemlos klar. Oder besser gesagt, ICH komme bei Win 10 mit USB problemlos klar. Bei den Linux SBC habe ich damit mmer einen K(r)ampf.
Auf dem Rechner läuft noch eine virtuelle COM-SW, die einen Link zu einem TCP-Server hält, mit dem ich RF-Link angebunden habe. Das läuft stabil.
Der smartmeter-Adapter geht auch via Ethernt und TCP-Server.
Versuche prinzipiell von den USB Verbindungen wegzukommen.
Hatte den Zigbee-Adapter auch über ser2net eingebunden. Aber ab dem dritten Panel gab es Probleme mit dem Anlernen. Muß keine Kausalität sein, könnte auch eine Koinzidenz sein. Jdenfalls bin ich dann probehalber wieder zurück direkt auf den USB des Win PC was auch augenscheinlich sofort eine Verbesserung gebracht hat.@klassisch hast du js-controller update gemacht ??
Bin da noch zurückhaltend bis von berufener Seite geklärt ist, wie das mit den Win 10 Installer Varianten geht. Mein System läuft derzeit recht gut und so soll es auch bleiben. Habe zu wenig Ahnung von npm, node.js etc um da Pionier sein zu wollen.
node.js v10.17.0 NPM 6.11.3 Typ: js-controller Titel: JS controller OS: win32 Verfügbar: 3.2.16 Installiert: 3.1.6 Ereignisse: ↦27 / ↦12 -
was ist neu
@Ilya : man kann externe konverter einbinmden für DIY Geräte
@Asgothian verbesserung des Pingprozesses - hier ist auch ein Button in den Objecten dazugekommen
@arteck Geräte können diert aus dem Converter gezogen werden auch wenn diese bei uns definiert sind
@Asgothian automatisches Löschen nicht gebrauchter Datenpunkte wenn man dem Ausschluss Tab nutzt
so uns nu lassen die Spiele beginnen
@Nachtrag da es hier zu vielen Fragen kommt
nach dem Update und nach dem Adapter start sind ALLE Geräte erstmal mit einer Link Quality von 10 in der Kacheln.. nach dem sich die Geräte gemeldet haben (Router) geht die Link Quality auf das was das Gerät lifert. bleibt die Link Quality auf 10 meldet sich das Gerät nicht, dass kann mehre Stunden dauern..also Geduld
ausser
die batteriebenen Geräte .. diese müssen sich erst melden. das dauert da sich diese selten Melden vor allem Aqara bzw. Xiaomi .. man kann es selbst antrigern per drücken des Knopfes am Gerät. erst dann sieht man die richtige Link Quality..Dankeschön an euch Entwickler dieses tollen Adapters!!
Bin jetzt mit 140 Devices umgestiegen von 9 Xiaomi Gateways auf einen CC26X2R, hat auf Anhieb alles super geklappt.
-
Ich habe auch Probleme nach Update auf 1.44
Ich habe 63 Geräte am Start , Board CC1352P , die meisten Geräte Xiaomi Aqara , MiijjaNach dem Update gingen 4 ( ! ) Geräte in der Verbindung auf false. Alles Geräte die vorher ohne Probleme verbunden waren , die ich mehrfach besitze ( Bewegungsmelder , Öffnungssensor ) .
Ich habe versucht die Batterien zu entfernen , warten , Gerät löschen , neu anlernen. Das Geräte wird korrekt erkannt , geht aber sofort auf Verbindung false.
Nach vielen Versuchen habe ich den Adapter downgegradet auf Version 1.20 ....siehe da alles wieder Tutti
Hat da jemand eine Idee ?
@yodameister sagte in ZigBee neue Version 1.4.4:
Ich habe auch Probleme nach Update auf 1.44
Ich habe 63 Geräte am Start , Board CC1352P , die meisten Geräte Xiaomi Aqara , MiijjaNach dem Update gingen 4 ( ! ) Geräte in der Verbindung auf false. Alles Geräte die vorher ohne Probleme verbunden waren , die ich mehrfach besitze ( Bewegungsmelder , Öffnungssensor ) .
Ich habe versucht die Batterien zu entfernen , warten , Gerät löschen , neu anlernen. Das Geräte wird korrekt erkannt , geht aber sofort auf Verbindung false.
Nach vielen Versuchen habe ich den Adapter downgegradet auf Version 1.20 ....siehe da alles wieder Tutti
Hat da jemand eine Idee ?
@Asgothian @arteck
Kurze Rückmeldung für Euch
Habe heute Zeit gefunden alles nochmal sauber zu installieren und derzeit ist alles online.
Vielleicht hing es mit zu vielen Updates die ich durchgeführt habe zusammen ? Im Moment jedenfalls alles wieder in Ordnung , sogar der Aqara Temperaturmelder in der Kühltruhe arbeitet wiederBleibt gesund !
-
Hallo in die wissende Runde,
ich schlage mich gerade mit der Trust ZYCT-202 herum. Angelernt bekomme ich sie. Habe sie auch im Zigbee-Adapter mal auf "Auschließen" gestellt, weil die Datenpunkte on/off und stop alle zusammen bei jedem Tastendruck aktualisiert wurden. Das ist nach dem "auschließen" nun nicht mehr der Fall.
ALLERDINGS werden mir die DPs für die Brightness-Tasten nicht befüllt beim Klicken. Ist die FB kakke oder kann ich da noch etwas tun? Wollte damit eine HUE-FB ersetzen:
Unterstützt wird die FB gem. WIKI-EIntrag bereits...
UDM Pro, Intel NUC - ioBroker in Proxmox-VM, PiHole+Grafana&Influx+TasmoAdmin in LXCs, Raspberry Pi3 (als CCU), Zigbee-Stick Sonoff, Synology DS918+
-
Hallo in die wissende Runde,
ich schlage mich gerade mit der Trust ZYCT-202 herum. Angelernt bekomme ich sie. Habe sie auch im Zigbee-Adapter mal auf "Auschließen" gestellt, weil die Datenpunkte on/off und stop alle zusammen bei jedem Tastendruck aktualisiert wurden. Das ist nach dem "auschließen" nun nicht mehr der Fall.
ALLERDINGS werden mir die DPs für die Brightness-Tasten nicht befüllt beim Klicken. Ist die FB kakke oder kann ich da noch etwas tun? Wollte damit eine HUE-FB ersetzen:
Unterstützt wird die FB gem. WIKI-EIntrag bereits...
-
@asgothian habe die Tasten heller und dunkler jetz tmal 2 Sekunden, mal 5 Sekunden mal 10 Sekunden gehalten - leider ohne Veränderung der DPs :/
Hab die Rmote auch nochmal angelernt und nochmal getestet (weiterhin "ausgeschlossen"). Tut sich nix bei BrightnessUDM Pro, Intel NUC - ioBroker in Proxmox-VM, PiHole+Grafana&Influx+TasmoAdmin in LXCs, Raspberry Pi3 (als CCU), Zigbee-Stick Sonoff, Synology DS918+
-
@asgothian habe die Tasten heller und dunkler jetz tmal 2 Sekunden, mal 5 Sekunden mal 10 Sekunden gehalten - leider ohne Veränderung der DPs :/
Hab die Rmote auch nochmal angelernt und nochmal getestet (weiterhin "ausgeschlossen"). Tut sich nix bei Brightness -
@arteck okay, da kommt verdammt viel, ich versuche mal, nur meine Knopf-Drücke hier auf dem LOG-Download beizufügen:
Helligkeit up:
2021-02-22 16:43:50.171 - debug: zigbee.0 (9813) Received Zigbee message from '0x00158d0004ff6060', type 'commandMove', cluster 'genLevelCtrl', data '{"movemode":0,"rate":30}' from endpoint 1 with groupID 24674 2021-02-22 16:43:50.175 - debug: zigbee.0 (9813) Type commandMove device {"type":"device","device":{"ID":30,"_type":"EndDevice","_ieeeAddr":"0x00158d0004ff6060","_networkAddress":14365,"_manufacturerID":4653,"_endpoints":[{"ID":1,"profileID":49246,"deviceID":2080,"inputClusters":[0,4,3,6,8,4096],"outputClusters":[0,4,3,6,8,4096],"deviceNetworkAddress":14365,"deviceIeeeAddress":"0x00158d0004ff6060","clusters":{"genBasic":{"attributes":{"modelId":"ZLL-NonColorController","manufacturerName":"Trust International B.V.","powerSource":3,"zclVersion":1,"appVersion":3,"stackVersion":1,"hwVersion":1,"dateCode":"20150212","swBuildId":"2000-0003"}}},"_binds":[],"_configuredReportings":[],"meta":{}},{"ID":2,"profileID":49246,"deviceID":1010,"inputClusters":[4096],"outputClusters":[4096],"deviceNetworkAddress":14365,"deviceIeeeAddress":"0x00158d0004ff6060","clusters":{},"_binds":[],"_configuredReportings":[],"meta":{}}],"_manufacturerName":"Trust International B.V.","_powerSource":"Battery","_modelID":"ZLL-NonColorController","_applicationVersion":3,"_stackVersion":1,"_zclVersion":1,"_hardwareVersion":1,"_dateCode":"20150212","_softwareBuildID":"2000-0003","_interviewCompleted":true,"_interviewing":false,"_skipDefaultResponse":false,"meta":{},"_lastSeen":1614008630170,"_linkquality":15},"mapped":{"zigbeeModel":["\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000","ZLL-NonColorController"],"model":"ZYCT-202","vendor":"Trust","description":"Remote control","fromZigbee":[{"cluster":"genOnOff","type":"commandOn"},{"cluster":"genOnOff","type":"commandOffWithEffect"},{"cluster":"genLevelCtrl","type":"commandStop"},{"cluster":"genLevelCtrl","type":"commandMove"}],"exposes":[{"type":"enum","name":"action","property":"action","access":1,"values":["on","off","stop","brightness_stop","brightness_move_up","brightness_move_down"],"description":"Triggered action (e.g. a button click)"},{"type":"numeric","name":"linkquality","property":"linkquality","access":1,"unit":"lqi","description":"Link quality (signal strength)","value_min":0,"value_max":255}],"toZigbee":[]},"name":"0x00158d0004ff6060"} incoming event: {"type":"commandMove","device":{"ID":30,"_type":"EndDevice","_ieeeAddr":"0x00158d0004ff6060","_networkAddress":14365,"_manufacturerID":4653,"_endpoints":[{"ID":1,"profileID":49246,"deviceID":2080,"inputClusters":[0,4,3,6,8,4096],"outputClusters":[0,4,3,6,8,4096],"deviceNetworkAddress":14365,"deviceIeeeAddress":"0x00158d0004ff6060","clusters":{"genBasic":{"attributes":{"modelId":"ZLL-NonColorController","manufacturerName":"Trust International B.V.","powerSource":3,"zclVersion":1,"appVersion":3,"stackVersion":1,"hwVersion":1,"dateCode":"20150212","swBuildId":"2000-0003"}}},"_binds":[],"_configuredReportings":[],"meta":{}},{"ID":2,"profileID":49246,"deviceID":1010,"inputClusters":[4096],"outputClusters":[4096],"deviceNetworkAddress":14365,"deviceIeeeAddress":"0x00158d0004ff6060","clusters":{},"_binds":[],"_configuredReportings":[],"meta":{}}],"_manufacturerName":"Trust International B.V.","_powerSource":"Battery","_modelID":"ZLL-NonColorController","_applicationVersion":3,"_stackVersion":1,"_zclVersion":1,"_hardwareVersion":1,"_dateCode":"20150212","_softwareBuildID":"2000-0003","_interviewCompleted":true,"_interviewing":false,"_skipDefaultResponse":false,"meta":{},"_lastSeen":1614008630170,"_linkquality":15},"endpoint":"[Circular]","data":{"movemode":0,"rate":30},"linkquality":15,"groupID":24674,"cluster":"genLevelCtrl","meta":{"zclTransactionSequenceNumber":37,"manufacturerCode":null,"frameControl":{"frameType":1,"manufacturerSpecific":false,"direction":0,"disableDefaultResponse":true,"reservedBits":0}}} 2021-02-22 16:43:50.184 - debug: zigbee.0 (9813) Publish {"action":"up-press","action_group":24674} 2021-02-22 16:43:50.445 - debug: zigbee.0 (9813) handleMessage. {"type":"commandStop","device":{"ID":30,"_type":"EndDevice","_ieeeAddr":"0x00158d0004ff6060","_networkAddress":14365,"_manufacturerID":4653,"_endpoints":[{"ID":1,"profileID":49246,"deviceID":2080,"inputClusters":[0,4,3,6,8,4096],"outputClusters":[0,4,3,6,8,4096],"deviceNetworkAddress":14365,"deviceIeeeAddress":"0x00158d0004ff6060","clusters":{"genBasic":{"attributes":{"modelId":"ZLL-NonColorController","manufacturerName":"Trust International B.V.","powerSource":3,"zclVersion":1,"appVersion":3,"stackVersion":1,"hwVersion":1,"dateCode":"20150212","swBuildId":"2000-0003"}}},"_binds":[],"_configuredReportings":[],"meta":{}},{"ID":2,"profileID":49246,"deviceID":1010,"inputClusters":[4096],"outputClusters":[4096],"deviceNetworkAddress":14365,"deviceIeeeAddress":"0x00158d0004ff6060","clusters":{},"_binds":[],"_configuredReportings":[],"meta":{}}],"_manufacturerName":"Trust International B.V.","_powerSource":"Battery","_modelID":"ZLL-NonColorController","_applicationVersion":3,"_stackVersion":1,"_zclVersion":1,"_hardwareVersion":1,"_dateCode":"20150212","_softwareBuildID":"2000-0003","_interviewCompleted":true,"_interviewing":false,"_skipDefaultResponse":false,"meta":{},"_lastSeen":1614008630445,"_linkquality":18},"endpoint":"[Circular]","data":{},"linkquality":18,"groupID":24674,"cluster":"genLevelCtrl","meta":{"zclTransactionSequenceNumber":38,"manufacturerCode":null,"frameControl":{"frameType":1,"manufacturerSpecific":false,"direction":0,"disableDefaultResponse":true,"reservedBits":0}}} 2021-02-22 16:43:50.446 - debug: zigbee.0 (9813) Received Zigbee message from '0x00158d0004ff6060', type 'commandStop', cluster 'genLevelCtrl', data '{}' from endpoint 1 with groupID 24674 2021-02-22 16:43:50.446 - debug: zigbee.0 (9813) Type commandStop device {"type":"device","device":{"ID":30,"_type":"EndDevice","_ieeeAddr":"0x00158d0004ff6060","_networkAddress":14365,"_manufacturerID":4653,"_endpoints":[{"ID":1,"profileID":49246,"deviceID":2080,"inputClusters":[0,4,3,6,8,4096],"outputClusters":[0,4,3,6,8,4096],"deviceNetworkAddress":14365,"deviceIeeeAddress":"0x00158d0004ff6060","clusters":{"genBasic":{"attributes":{"modelId":"ZLL-NonColorController","manufacturerName":"Trust International B.V.","powerSource":3,"zclVersion":1,"appVersion":3,"stackVersion":1,"hwVersion":1,"dateCode":"20150212","swBuildId":"2000-0003"}}},"_binds":[],"_configuredReportings":[],"meta":{}},{"ID":2,"profileID":49246,"deviceID":1010,"inputClusters":[4096],"outputClusters":[4096],"deviceNetworkAddress":14365,"deviceIeeeAddress":"0x00158d0004ff6060","clusters":{},"_binds":[],"_configuredReportings":[],"meta":{}}],"_manufacturerName":"Trust International B.V.","_powerSource":"Battery","_modelID":"ZLL-NonColorController","_applicationVersion":3,"_stackVersion":1,"_zclVersion":1,"_hardwareVersion":1,"_dateCode":"20150212","_softwareBuildID":"2000-0003","_interviewCompleted":true,"_interviewing":false,"_skipDefaultResponse":false,"meta":{},"_lastSeen":1614008630445,"_linkquality":18},"mapped":{"zigbeeModel":["\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000","ZLL-NonColorController"],"model":"ZYCT-202","vendor":"Trust","description":"Remote control","fromZigbee":[{"cluster":"genOnOff","type":"commandOn"},{"cluster":"genOnOff","type":"commandOffWithEffect"},{"cluster":"genLevelCtrl","type":"commandStop"},{"cluster":"genLevelCtrl","type":"commandMove"}],"exposes":[{"type":"enum","name":"action","property":"action","access":1,"values":["on","off","stop","brightness_stop","brightness_move_up","brightness_move_down"],"description":"Triggered action (e.g. a button click)"},{"type":"numeric","name":"linkquality","property":"linkquality","access":1,"unit":"lqi","description":"Link quality (signal strength)","value_min":0,"value_max":255}],"toZigbee":[]},"name":"0x00158d0004ff6060"} incoming event: {"type":"commandStop","device":{"ID":30,"_type":"EndDevice","_ieeeAddr":"0x00158d0004ff6060","_networkAddress":14365,"_manufacturerID":4653,"_endpoints":[{"ID":1,"profileID":49246,"deviceID":2080,"inputClusters":[0,4,3,6,8,4096],"outputClusters":[0,4,3,6,8,4096],"deviceNetworkAddress":14365,"deviceIeeeAddress":"0x00158d0004ff6060","clusters":{"genBasic":{"attributes":{"modelId":"ZLL-NonColorController","manufacturerName":"Trust International B.V.","powerSource":3,"zclVersion":1,"appVersion":3,"stackVersion":1,"hwVersion":1,"dateCode":"20150212","swBuildId":"2000-0003"}}},"_binds":[],"_configuredReportings":[],"meta":{}},{"ID":2,"profileID":49246,"deviceID":1010,"inputClusters":[4096],"outputClusters":[4096],"deviceNetworkAddress":14365,"deviceIeeeAddress":"0x00158d0004ff6060","clusters":{},"_binds":[],"_configuredReportings":[],"meta":{}}],"_manufacturerName":"Trust International B.V.","_powerSource":"Battery","_modelID":"ZLL-NonColorController","_applicationVersion":3,"_stackVersion":1,"_zclVersion":1,"_hardwareVersion":1,"_dateCode":"20150212","_softwareBuildID":"2000-0003","_interviewCompleted":true,"_interviewing":false,"_skipDefaultResponse":false,"meta":{},"_lastSeen":1614008630445,"_linkquality":18},"endpoint":"[Circular]","data":{},"linkquality":18,"groupID":24674,"cluster":"genLevelCtrl","meta":{"zclTransactionSequenceNumber":38,"manufacturerCode":null,"frameControl":{"frameType":1,"manufacturerSpecific":false,"direction":0,"disableDefaultResponse":true,"reservedBits":0}}} 2021-02-22 16:43:50.453 - debug: zigbee.0 (9813) Publish {"action":"stop","action_group":24674}und Helligkeit down:
2021-02-22 16:46:14.338 - debug: zigbee.0 (9813) handleMessage. {"type":"commandMove","device":{"ID":30,"_type":"EndDevice","_ieeeAddr":"0x00158d0004ff6060","_networkAddress":14365,"_manufacturerID":4653,"_endpoints":[{"ID":1,"profileID":49246,"deviceID":2080,"inputClusters":[0,4,3,6,8,4096],"outputClusters":[0,4,3,6,8,4096],"deviceNetworkAddress":14365,"deviceIeeeAddress":"0x00158d0004ff6060","clusters":{"genBasic":{"attributes":{"modelId":"ZLL-NonColorController","manufacturerName":"Trust International B.V.","powerSource":3,"zclVersion":1,"appVersion":3,"stackVersion":1,"hwVersion":1,"dateCode":"20150212","swBuildId":"2000-0003"}}},"_binds":[],"_configuredReportings":[],"meta":{}},{"ID":2,"profileID":49246,"deviceID":1010,"inputClusters":[4096],"outputClusters":[4096],"deviceNetworkAddress":14365,"deviceIeeeAddress":"0x00158d0004ff6060","clusters":{},"_binds":[],"_configuredReportings":[],"meta":{}}],"_manufacturerName":"Trust International B.V.","_powerSource":"Battery","_modelID":"ZLL-NonColorController","_applicationVersion":3,"_stackVersion":1,"_zclVersion":1,"_hardwareVersion":1,"_dateCode":"20150212","_softwareBuildID":"2000-0003","_interviewCompleted":true,"_interviewing":false,"_skipDefaultResponse":false,"meta":{},"_lastSeen":1614008774337,"_linkquality":10},"endpoint":"[Circular]","data":{"movemode":1,"rate":30},"linkquality":10,"groupID":24674,"cluster":"genLevelCtrl","meta":{"zclTransactionSequenceNumber":39,"manufacturerCode":null,"frameControl":{"frameType":1,"manufacturerSpecific":false,"direction":0,"disableDefaultResponse":true,"reservedBits":0}}} 2021-02-22 16:46:14.338 - debug: zigbee.0 (9813) Received Zigbee message from '0x00158d0004ff6060', type 'commandMove', cluster 'genLevelCtrl', data '{"movemode":1,"rate":30}' from endpoint 1 with groupID 24674 2021-02-22 16:46:14.339 - debug: zigbee.0 (9813) Type commandMove device {"type":"device","device":{"ID":30,"_type":"EndDevice","_ieeeAddr":"0x00158d0004ff6060","_networkAddress":14365,"_manufacturerID":4653,"_endpoints":[{"ID":1,"profileID":49246,"deviceID":2080,"inputClusters":[0,4,3,6,8,4096],"outputClusters":[0,4,3,6,8,4096],"deviceNetworkAddress":14365,"deviceIeeeAddress":"0x00158d0004ff6060","clusters":{"genBasic":{"attributes":{"modelId":"ZLL-NonColorController","manufacturerName":"Trust International B.V.","powerSource":3,"zclVersion":1,"appVersion":3,"stackVersion":1,"hwVersion":1,"dateCode":"20150212","swBuildId":"2000-0003"}}},"_binds":[],"_configuredReportings":[],"meta":{}},{"ID":2,"profileID":49246,"deviceID":1010,"inputClusters":[4096],"outputClusters":[4096],"deviceNetworkAddress":14365,"deviceIeeeAddress":"0x00158d0004ff6060","clusters":{},"_binds":[],"_configuredReportings":[],"meta":{}}],"_manufacturerName":"Trust International B.V.","_powerSource":"Battery","_modelID":"ZLL-NonColorController","_applicationVersion":3,"_stackVersion":1,"_zclVersion":1,"_hardwareVersion":1,"_dateCode":"20150212","_softwareBuildID":"2000-0003","_interviewCompleted":true,"_interviewing":false,"_skipDefaultResponse":false,"meta":{},"_lastSeen":1614008774337,"_linkquality":10},"mapped":{"zigbeeModel":["\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000","ZLL-NonColorController"],"model":"ZYCT-202","vendor":"Trust","description":"Remote control","fromZigbee":[{"cluster":"genOnOff","type":"commandOn"},{"cluster":"genOnOff","type":"commandOffWithEffect"},{"cluster":"genLevelCtrl","type":"commandStop"},{"cluster":"genLevelCtrl","type":"commandMove"}],"exposes":[{"type":"enum","name":"action","property":"action","access":1,"values":["on","off","stop","brightness_stop","brightness_move_up","brightness_move_down"],"description":"Triggered action (e.g. a button click)"},{"type":"numeric","name":"linkquality","property":"linkquality","access":1,"unit":"lqi","description":"Link quality (signal strength)","value_min":0,"value_max":255}],"toZigbee":[]},"name":"0x00158d0004ff6060"} incoming event: {"type":"commandMove","device":{"ID":30,"_type":"EndDevice","_ieeeAddr":"0x00158d0004ff6060","_networkAddress":14365,"_manufacturerID":4653,"_endpoints":[{"ID":1,"profileID":49246,"deviceID":2080,"inputClusters":[0,4,3,6,8,4096],"outputClusters":[0,4,3,6,8,4096],"deviceNetworkAddress":14365,"deviceIeeeAddress":"0x00158d0004ff6060","clusters":{"genBasic":{"attributes":{"modelId":"ZLL-NonColorController","manufacturerName":"Trust International B.V.","powerSource":3,"zclVersion":1,"appVersion":3,"stackVersion":1,"hwVersion":1,"dateCode":"20150212","swBuildId":"2000-0003"}}},"_binds":[],"_configuredReportings":[],"meta":{}},{"ID":2,"profileID":49246,"deviceID":1010,"inputClusters":[4096],"outputClusters":[4096],"deviceNetworkAddress":14365,"deviceIeeeAddress":"0x00158d0004ff6060","clusters":{},"_binds":[],"_configuredReportings":[],"meta":{}}],"_manufacturerName":"Trust International B.V.","_powerSource":"Battery","_modelID":"ZLL-NonColorController","_applicationVersion":3,"_stackVersion":1,"_zclVersion":1,"_hardwareVersion":1,"_dateCode":"20150212","_softwareBuildID":"2000-0003","_interviewCompleted":true,"_interviewing":false,"_skipDefaultResponse":false,"meta":{},"_lastSeen":1614008774337,"_linkquality":10},"endpoint":"[Circular]","data":{"movemode":1,"rate":30},"linkquality":10,"groupID":24674,"cluster":"genLevelCtrl","meta":{"zclTransactionSequenceNumber":39,"manufacturerCode":null,"frameControl":{"frameType":1,"manufacturerSpecific":false,"direction":0,"disableDefaultResponse":true,"reservedBits":0}}} 2021-02-22 16:46:14.346 - debug: zigbee.0 (9813) Publish {"action":"down-press","action_group":24674} 2021-02-22 16:46:14.469 - debug: zigbee.0 (9813) handleMessage. {"type":"commandStop","device":{"ID":30,"_type":"EndDevice","_ieeeAddr":"0x00158d0004ff6060","_networkAddress":14365,"_manufacturerID":4653,"_endpoints":[{"ID":1,"profileID":49246,"deviceID":2080,"inputClusters":[0,4,3,6,8,4096],"outputClusters":[0,4,3,6,8,4096],"deviceNetworkAddress":14365,"deviceIeeeAddress":"0x00158d0004ff6060","clusters":{"genBasic":{"attributes":{"modelId":"ZLL-NonColorController","manufacturerName":"Trust International B.V.","powerSource":3,"zclVersion":1,"appVersion":3,"stackVersion":1,"hwVersion":1,"dateCode":"20150212","swBuildId":"2000-0003"}}},"_binds":[],"_configuredReportings":[],"meta":{}},{"ID":2,"profileID":49246,"deviceID":1010,"inputClusters":[4096],"outputClusters":[4096],"deviceNetworkAddress":14365,"deviceIeeeAddress":"0x00158d0004ff6060","clusters":{},"_binds":[],"_configuredReportings":[],"meta":{}}],"_manufacturerName":"Trust International B.V.","_powerSource":"Battery","_modelID":"ZLL-NonColorController","_applicationVersion":3,"_stackVersion":1,"_zclVersion":1,"_hardwareVersion":1,"_dateCode":"20150212","_softwareBuildID":"2000-0003","_interviewCompleted":true,"_interviewing":false,"_skipDefaultResponse":false,"meta":{},"_lastSeen":1614008774469,"_linkquality":13},"endpoint":"[Circular]","data":{},"linkquality":13,"groupID":24674,"cluster":"genLevelCtrl","meta":{"zclTransactionSequenceNumber":40,"manufacturerCode":null,"frameControl":{"frameType":1,"manufacturerSpecific":false,"direction":0,"disableDefaultResponse":true,"reservedBits":0}}} 2021-02-22 16:46:14.470 - debug: zigbee.0 (9813) Received Zigbee message from '0x00158d0004ff6060', type 'commandStop', cluster 'genLevelCtrl', data '{}' from endpoint 1 with groupID 24674 2021-02-22 16:46:14.470 - debug: zigbee.0 (9813) Type commandStop device {"type":"device","device":{"ID":30,"_type":"EndDevice","_ieeeAddr":"0x00158d0004ff6060","_networkAddress":14365,"_manufacturerID":4653,"_endpoints":[{"ID":1,"profileID":49246,"deviceID":2080,"inputClusters":[0,4,3,6,8,4096],"outputClusters":[0,4,3,6,8,4096],"deviceNetworkAddress":14365,"deviceIeeeAddress":"0x00158d0004ff6060","clusters":{"genBasic":{"attributes":{"modelId":"ZLL-NonColorController","manufacturerName":"Trust International B.V.","powerSource":3,"zclVersion":1,"appVersion":3,"stackVersion":1,"hwVersion":1,"dateCode":"20150212","swBuildId":"2000-0003"}}},"_binds":[],"_configuredReportings":[],"meta":{}},{"ID":2,"profileID":49246,"deviceID":1010,"inputClusters":[4096],"outputClusters":[4096],"deviceNetworkAddress":14365,"deviceIeeeAddress":"0x00158d0004ff6060","clusters":{},"_binds":[],"_configuredReportings":[],"meta":{}}],"_manufacturerName":"Trust International B.V.","_powerSource":"Battery","_modelID":"ZLL-NonColorController","_applicationVersion":3,"_stackVersion":1,"_zclVersion":1,"_hardwareVersion":1,"_dateCode":"20150212","_softwareBuildID":"2000-0003","_interviewCompleted":true,"_interviewing":false,"_skipDefaultResponse":false,"meta":{},"_lastSeen":1614008774469,"_linkquality":13},"mapped":{"zigbeeModel":["\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000\u0000","ZLL-NonColorController"],"model":"ZYCT-202","vendor":"Trust","description":"Remote control","fromZigbee":[{"cluster":"genOnOff","type":"commandOn"},{"cluster":"genOnOff","type":"commandOffWithEffect"},{"cluster":"genLevelCtrl","type":"commandStop"},{"cluster":"genLevelCtrl","type":"commandMove"}],"exposes":[{"type":"enum","name":"action","property":"action","access":1,"values":["on","off","stop","brightness_stop","brightness_move_up","brightness_move_down"],"description":"Triggered action (e.g. a button click)"},{"type":"numeric","name":"linkquality","property":"linkquality","access":1,"unit":"lqi","description":"Link quality (signal strength)","value_min":0,"value_max":255}],"toZigbee":[]},"name":"0x00158d0004ff6060"} incoming event: {"type":"commandStop","device":{"ID":30,"_type":"EndDevice","_ieeeAddr":"0x00158d0004ff6060","_networkAddress":14365,"_manufacturerID":4653,"_endpoints":[{"ID":1,"profileID":49246,"deviceID":2080,"inputClusters":[0,4,3,6,8,4096],"outputClusters":[0,4,3,6,8,4096],"deviceNetworkAddress":14365,"deviceIeeeAddress":"0x00158d0004ff6060","clusters":{"genBasic":{"attributes":{"modelId":"ZLL-NonColorController","manufacturerName":"Trust International B.V.","powerSource":3,"zclVersion":1,"appVersion":3,"stackVersion":1,"hwVersion":1,"dateCode":"20150212","swBuildId":"2000-0003"}}},"_binds":[],"_configuredReportings":[],"meta":{}},{"ID":2,"profileID":49246,"deviceID":1010,"inputClusters":[4096],"outputClusters":[4096],"deviceNetworkAddress":14365,"deviceIeeeAddress":"0x00158d0004ff6060","clusters":{},"_binds":[],"_configuredReportings":[],"meta":{}}],"_manufacturerName":"Trust International B.V.","_powerSource":"Battery","_modelID":"ZLL-NonColorController","_applicationVersion":3,"_stackVersion":1,"_zclVersion":1,"_hardwareVersion":1,"_dateCode":"20150212","_softwareBuildID":"2000-0003","_interviewCompleted":true,"_interviewing":false,"_skipDefaultResponse":false,"meta":{},"_lastSeen":1614008774469,"_linkquality":13},"endpoint":"[Circular]","data":{},"linkquality":13,"groupID":24674,"cluster":"genLevelCtrl","meta":{"zclTransactionSequenceNumber":40,"manufacturerCode":null,"frameControl":{"frameType":1,"manufacturerSpecific":false,"direction":0,"disableDefaultResponse":true,"reservedBits":0}}} 2021-02-22 16:46:14.480 - debug: zigbee.0 (9813) Publish {"action":"stop","action_group":24674} 2021-02-22 16:46:22.300 - debug: zigbee.0 (9813) handleMessage. {"type":"commandQueryNextImageRequest","device":{"ID":25,"_type":"Router","_ieeeAddr":"0x7cb03eaa00b0ac01","_networkAddress":14037,"_manufacturerID":48042,"_endpoints":[{"ID":3,"profileID":49246,"deviceID":16,"inputClusters":[4096,0,3,4,5,6,2820,64527],"outputClusters":[25],"deviceNetworkAddress":14037,"deviceIeeeAddress":"0x7cb03eaa00b0ac01","clusters":{"genBasic":{"attributes":{"modelId":"Plug 01","manufacturerName":"OSRAM","powerSource":1,"zclVersion":1,"appVersion":17,"stackVersion":2,"hwVersion":1,"dateCode":"20140331DEOS****","swBuildId":"V1.05.11"}},"genOnOff":{"attributes":{"onOff":0}}},"_binds":[{"cluster":6,"type":"endpoint","deviceIeeeAddress":"0x00124b0018eb42ab","endpointID":1}],"_configuredReportings":[],"meta":{}}],"_manufacturerName":"OSRAM","_powerSource":"Mains (single phase)","_modelID":"Plug 01","_applicationVersion":17,"_stackVersion":2,"_zclVersion":1,"_hardwareVersion":1,"_dateCode":"20140331DEOS****","_softwareBuildID":"V1.05.11","_interviewCompleted":true,"_interviewing":false,"_skipDefaultResponse":false,"meta":{"configured":1},"_lastSeen":1614008782300,"_linkquality":105},"endpoint":"[Circular]","data":{"fieldControl":0,"manufacturerCode":4364,"imageType":39,"fileVersion":16909585},"linkquality":105,"groupID":0,"cluster":"genOta","meta":{"zclTransactionSequenceNumber":43,"manufacturerCode":null,"frameControl":{"frameType":1,"manufacturerSpecific":false,"direction":0,"disableDefaultResponse":true,"reservedBits":0}}} 2021-02-22 16:46:22.301 - debug: zigbee.0 (9813) Received Zigbee message from '0x7cb03eaa00b0ac01', type 'commandQueryNextImageRequest', cluster 'genOta', data '{"fieldControl":0,"manufacturerCode":4364,"imageType":39,"fileVersion":16909585}' from endpoint 3 with groupID 0 2021-02-22 16:46:22.302 - debug: zigbee.0 (9813) Type commandQueryNextImageRequest device {"type":"device","device":{"ID":25,"_type":"Router","_ieeeAddr":"0x7cb03eaa00b0ac01","_networkAddress":14037,"_manufacturerID":48042,"_endpoints":[{"ID":3,"profileID":49246,"deviceID":16,"inputClusters":[4096,0,3,4,5,6,2820,64527],"outputClusters":[25],"deviceNetworkAddress":14037,"deviceIeeeAddress":"0x7cb03eaa00b0ac01","clusters":{"genBasic":{"attributes":{"modelId":"Plug 01","manufacturerName":"OSRAM","powerSource":1,"zclVersion":1,"appVersion":17,"stackVersion":2,"hwVersion":1,"dateCode":"20140331DEOS****","swBuildId":"V1.05.11"}},"genOnOff":{"attributes":{"onOff":0}}},"_binds":[{"cluster":6,"type":"endpoint","deviceIeeeAddress":"0x00124b0018eb42ab","endpointID":1}],"_configuredReportings":[],"meta":{}}],"_manufacturerName":"OSRAM","_powerSource":"Mains (single phase)","_modelID":"Plug 01","_applicationVersion":17,"_stackVersion":2,"_zclVersion":1,"_hardwareVersion":1,"_dateCode":"20140331DEOS****","_softwareBuildID":"V1.05.11","_interviewCompleted":true,"_interviewing":false,"_skipDefaultResponse":false,"meta":{"configured":1},"_lastSeen":1614008782300,"_linkquality":105},"mapped":{"exposes":[{"type":"switch","features":[{"type":"binary","name":"state","property":"state","access":7,"value_on":"ON","value_off":"OFF","description":"On/off state of the switch","value_toggle":"TOGGLE"}]},{"type":"numeric","name":"linkquality","property":"linkquality","access":1,"unit":"lqi","description":"Link quality (signal strength)","value_min":0,"value_max":255}],"fromZigbee":[{"cluster":"genOnOff","type":["attributeReport","readResponse"]},{"cluster":"genBasic","type":["attributeReport","readResponse"]}],"toZigbee":[{"key":["state"]},{"key":["scene_store"]},{"key":["scene_recall"]},{"key":["scene_add"]},{"key":["scene_remove"]},{"key":["scene_remove_all"]}],"zigbeeModel":["Plug 01"],"model":"AB3257001NJ","description":"Smart+ plug","vendor":"OSRAM","meta":{"configureKey":1},"ota":{}},"name":"0x7cb03eaa00b0ac01"} incoming event: {"type":"commandQueryNextImageRequest","device":{"ID":25,"_type":"Router","_ieeeAddr":"0x7cb03eaa00b0ac01","_networkAddress":14037,"_manufacturerID":48042,"_endpoints":[{"ID":3,"profileID":49246,"deviceID":16,"inputClusters":[4096,0,3,4,5,6,2820,64527],"outputClusters":[25],"deviceNetworkAddress":14037,"deviceIeeeAddress":"0x7cb03eaa00b0ac01","clusters":{"genBasic":{"attributes":{"modelId":"Plug 01","manufacturerName":"OSRAM","powerSource":1,"zclVersion":1,"appVersion":17,"stackVersion":2,"hwVersion":1,"dateCode":"20140331DEOS****","swBuildId":"V1.05.11"}},"genOnOff":{"attributes":{"onOff":0}}},"_binds":[{"cluster":6,"type":"endpoint","deviceIeeeAddress":"0x00124b0018eb42ab","endpointID":1}],"_configuredReportings":[],"meta":{}}],"_manufacturerName":"OSRAM","_powerSource":"Mains (single phase)","_modelID":"Plug 01","_applicationVersion":17,"_stackVersion":2,"_zclVersion":1,"_hardwareVersion":1,"_dateCode":"20140331DEOS****","_softwareBuildID":"V1.05.11","_interviewCompleted":true,"_interviewing":false,"_skipDefaultResponse":false,"meta":{"configured":1},"_lastSeen":1614008782300,"_linkquality":105},"endpoint":"[Circular]","data":{"fieldControl":0,"manufacturerCode":4364,"imageType":39,"fileVersion":16909585},"linkquality":105,"groupID":0,"cluster":"genOta","meta":{"zclTransactionSequenceNumber":43,"manufacturerCode":null,"frameControl":{"frameType":1,"manufacturerSpecific":false,"direction":0,"disableDefaultResponse":true,"reservedBits":0}}} 2021-02-22 16:46:22.311 - debug: zigbee.0 (9813) No converter available for 'AB3257001NJ' with cluster 'genOta' and type 'commandQueryNextImageRequest'Mein Zigbee-Kooridnator:
type:zStack30x
version:2-2.2.7.2.
revision:20190523
port:/dev/ttyACM0
channel:11und ein Screen von der Fernbedienung:
-
@kueppert sagte in ZigBee neue Version 1.4.4:
Publish {"action":"up-press","action_group":24674}
@Asgothian das ist wieder so ein guppengedönz wie mit der anderen Fernbedinung.
zigbee hab ich, zwave auch, nuc's genauso und HA auch
-
[vielleicht-OT?]
Hallo,
eine Frage an die Runde der wissenden:
Habe fetgestellt, daß ich von meinem aqara Bewegungdmelder die occupancy-Botschaft immer mehrfach bekomme. Im Abstand von wenigen ms.
Ist das eine Eigenschaft des Sensors oder ist das evtl eine Multipath- Übertragung im Zigee-Netz? Oder was ganz anderes?
Heute Vormittag waren es 4 Trigger pro event, jetzt sind es gerade 2 Trigger pro event.
Hier ein Beispiel aus dem mitlaufenden log (Probephase) mit Ausgaben aus meinem Skript.
Ich habe einen debouncer gebaut, der nach nach dem Eintreffen eines Triggers durch ein true signal die folgende Sekunde weitere Trigger abfängt, damit die Folgeprozesse nicht mehrfach ausgelöst werden.Man sieht, daß beim ersten abgebildeten Trigger der vorige ca. 500 Sekunden früher war. Dieser Trigger kommt auch durch den debouncer. Dann kommen nach 4, 11 und 12ms weitere Trigger vor dem debouncer an.
Der Sensor hat die Nummer 00158d0006402123
Heute Abend habe ich mal auf Debug gestellt. Da kamen dann nur nich 2 Trigger pro event.
Erst mal nur die Skript-Ausgaben
Und jetzt log-Stufe:
-
@kueppert sagte in ZigBee neue Version 1.4.4:
Publish {"action":"up-press","action_group":24674}
@Asgothian das ist wieder so ein guppengedönz wie mit der anderen Fernbedinung.
@arteck sagte in ZigBee neue Version 1.4.4:
@kueppert sagte in ZigBee neue Version 1.4.4:
Publish {"action":"up-press","action_group":24674}
@Asgothian das ist wieder so ein guppengedönz wie mit der anderen Fernbedinung.
Ist es, ist aber in diesem Fall unwichtig, da die FB nur jeweils einen Knopf für auf und abdimmen.
A.
-
@arteck sagte in ZigBee neue Version 1.4.4:
@kueppert sagte in ZigBee neue Version 1.4.4:
Publish {"action":"up-press","action_group":24674}
@Asgothian das ist wieder so ein guppengedönz wie mit der anderen Fernbedinung.
Ist es, ist aber in diesem Fall unwichtig, da die FB nur jeweils einen Knopf für auf und abdimmen.
A.
-
was ist neu
@Ilya : man kann externe konverter einbinmden für DIY Geräte
@Asgothian verbesserung des Pingprozesses - hier ist auch ein Button in den Objecten dazugekommen
@arteck Geräte können diert aus dem Converter gezogen werden auch wenn diese bei uns definiert sind
@Asgothian automatisches Löschen nicht gebrauchter Datenpunkte wenn man dem Ausschluss Tab nutzt
so uns nu lassen die Spiele beginnen
@Nachtrag da es hier zu vielen Fragen kommt
nach dem Update und nach dem Adapter start sind ALLE Geräte erstmal mit einer Link Quality von 10 in der Kacheln.. nach dem sich die Geräte gemeldet haben (Router) geht die Link Quality auf das was das Gerät lifert. bleibt die Link Quality auf 10 meldet sich das Gerät nicht, dass kann mehre Stunden dauern..also Geduld
ausser
die batteriebenen Geräte .. diese müssen sich erst melden. das dauert da sich diese selten Melden vor allem Aqara bzw. Xiaomi .. man kann es selbst antrigern per drücken des Knopfes am Gerät. erst dann sieht man die richtige Link Quality..@arteck so wollte ein paar Glühlampen löschen, da ich andere einlernen wollte. So leider konnte ich keine mehr danach neu einlernen. Habe den ti cc26x2r1. Entweder hat er gar nichts gefunden oder nur undefined. So IObroker neu gestartet. das Board einmal vom USB genommen. hat alles nicht genutzt. Also habe ich den Adapter einmal neu installiert. Aber jetzt geht da wirklich nicht mehr viel. Ich stelle den Adapter ein. Dann gehe ich auf speichern. Jetzt bekomme ich die Mldung" das jetzt meine Einstellungen verworfen werden, obwohl ich auf speichern gedrückt habe. Adapter bleibt gelb. So wenn ich jetzt einmal danach in die Einstellungen gehe, sind alle meine Einstellungen vorhanden. Möchte ich einmal einen Kanalscan machen, dann wird mir gesagt ich muss vorher speichern und den Adapter neu starten. IObroker Fix auch schon gemacht. Anbei auch das Log File von IO Broker.
Kannst Du mir da einmal weiterhelfen ?Danke
zigbee.0 2021-02-23 14:27:30.603 error (4887) Cannot read property 'getEntries' of null zigbee.0 2021-02-23 14:27:30.603 error at stop (/opt/iobroker/node_modules/iobroker.js-controller/lib/adapter.js:8620:22) zigbee.0 2021-02-23 14:27:30.603 error at Zigbee.emit (events.js:315:20) zigbee.0 2021-02-23 14:27:30.603 error at Zigbee.onUnload (/opt/iobroker/node_modules/iobroker.zigbee/main.js:581:41) zigbee.0 2021-02-23 14:27:30.603 error at ZigbeeController.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:310:20) zigbee.0 2021-02-23 14:27:30.603 error at ZigbeeController.callExtensionMethod (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:192:42) zigbee.0 2021-02-23 14:27:30.603 error at DeviceAvailability.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zbDeviceAvailability.js:222:43) zigbee.0 2021-02-23 14:27:30.603 error at ZigbeeController.getClients (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:206:49) zigbee.0 2021-02-23 14:27:30.603 error at Controller.getDevices (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:273:31) zigbee.0 2021-02-23 14:27:30.603 error at Function.all (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:240:16) zigbee.0 2021-02-23 14:27:30.603 error at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:220:55) zigbee.0 2021-02-23 14:27:30.603 error (4887) TypeError: Cannot read property 'getEntries' of null zigbee.0 2021-02-23 14:27:30.600 error (4887) unhandled promise rejection: Cannot read property 'getEntries' of null zigbee.0 2021-02-23 14:27:30.599 error (4887) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
-
@arteck so wollte ein paar Glühlampen löschen, da ich andere einlernen wollte. So leider konnte ich keine mehr danach neu einlernen. Habe den ti cc26x2r1. Entweder hat er gar nichts gefunden oder nur undefined. So IObroker neu gestartet. das Board einmal vom USB genommen. hat alles nicht genutzt. Also habe ich den Adapter einmal neu installiert. Aber jetzt geht da wirklich nicht mehr viel. Ich stelle den Adapter ein. Dann gehe ich auf speichern. Jetzt bekomme ich die Mldung" das jetzt meine Einstellungen verworfen werden, obwohl ich auf speichern gedrückt habe. Adapter bleibt gelb. So wenn ich jetzt einmal danach in die Einstellungen gehe, sind alle meine Einstellungen vorhanden. Möchte ich einmal einen Kanalscan machen, dann wird mir gesagt ich muss vorher speichern und den Adapter neu starten. IObroker Fix auch schon gemacht. Anbei auch das Log File von IO Broker.
Kannst Du mir da einmal weiterhelfen ?Danke
zigbee.0 2021-02-23 14:27:30.603 error (4887) Cannot read property 'getEntries' of null zigbee.0 2021-02-23 14:27:30.603 error at stop (/opt/iobroker/node_modules/iobroker.js-controller/lib/adapter.js:8620:22) zigbee.0 2021-02-23 14:27:30.603 error at Zigbee.emit (events.js:315:20) zigbee.0 2021-02-23 14:27:30.603 error at Zigbee.onUnload (/opt/iobroker/node_modules/iobroker.zigbee/main.js:581:41) zigbee.0 2021-02-23 14:27:30.603 error at ZigbeeController.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:310:20) zigbee.0 2021-02-23 14:27:30.603 error at ZigbeeController.callExtensionMethod (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:192:42) zigbee.0 2021-02-23 14:27:30.603 error at DeviceAvailability.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zbDeviceAvailability.js:222:43) zigbee.0 2021-02-23 14:27:30.603 error at ZigbeeController.getClients (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:206:49) zigbee.0 2021-02-23 14:27:30.603 error at Controller.getDevices (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:273:31) zigbee.0 2021-02-23 14:27:30.603 error at Function.all (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:240:16) zigbee.0 2021-02-23 14:27:30.603 error at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:220:55) zigbee.0 2021-02-23 14:27:30.603 error (4887) TypeError: Cannot read property 'getEntries' of null zigbee.0 2021-02-23 14:27:30.600 error (4887) unhandled promise rejection: Cannot read property 'getEntries' of null zigbee.0 2021-02-23 14:27:30.599 error (4887) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
Bitte früher im Log schauen. Das was du da gepostet hast sind Fehler die auftreten wenn der Zigbee Adapter versucht sich zu beenden ohne das er sauber initialisiert wurde. Der eigentliche Fehler tritt vorher auf.
A.
ioBroker auf RPi4 - Hardware soweit wie möglich via Zigbee.
"Shit don't work" ist keine Fehlermeldung, sondern ein Fluch. -
Bitte früher im Log schauen. Das was du da gepostet hast sind Fehler die auftreten wenn der Zigbee Adapter versucht sich zu beenden ohne das er sauber initialisiert wurde. Der eigentliche Fehler tritt vorher auf.
A.
@asgothian ok, habe noch einmal geschaut. Habe jetzt auch mal mein TI Board neu geflashed. Dann wurde er zumindest grün. Dann habe ich den Kanal noch einmal geändert. Seitdem das gleiche Problem wieder..
zigbee.0 2021-02-23 16:44:19.037 info (3850) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason zigbee.0 2021-02-23 16:44:19.035 info (3850) terminating zigbee.0 2021-02-23 16:44:19.034 warn (3850) Failed to stop zigbee during startup zigbee.0 2021-02-23 16:44:19.033 info (3850) Zigbee: disabling joining new devices. zigbee.0 2021-02-23 16:44:19.029 info (3850) cleaned everything up... zigbee.0 2021-02-23 16:44:19.027 info (3850) Got terminate signal TERMINATE_YOURSELF zigbee.0 2021-02-23 16:43:27.005 info (3850) Installed Version: iobroker.zigbee@1.4.4 zigbee.0 2021-02-23 16:43:26.372 info (3850) Starting Zigbee npm ... zigbee.0 2021-02-23 16:43:26.251 info (3850) starting. Version 1.4.4 in /opt/iobroker/node_modules/iobroker.zigbee, node: v14.15.4, js-controller: 3.2.16 zigbee.0 2021-02-23 16:43:22.640 error (3789) Cannot read property 'getEntries' of null -
@asgothian ok, habe noch einmal geschaut. Habe jetzt auch mal mein TI Board neu geflashed. Dann wurde er zumindest grün. Dann habe ich den Kanal noch einmal geändert. Seitdem das gleiche Problem wieder..
zigbee.0 2021-02-23 16:44:19.037 info (3850) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason zigbee.0 2021-02-23 16:44:19.035 info (3850) terminating zigbee.0 2021-02-23 16:44:19.034 warn (3850) Failed to stop zigbee during startup zigbee.0 2021-02-23 16:44:19.033 info (3850) Zigbee: disabling joining new devices. zigbee.0 2021-02-23 16:44:19.029 info (3850) cleaned everything up... zigbee.0 2021-02-23 16:44:19.027 info (3850) Got terminate signal TERMINATE_YOURSELF zigbee.0 2021-02-23 16:43:27.005 info (3850) Installed Version: iobroker.zigbee@1.4.4 zigbee.0 2021-02-23 16:43:26.372 info (3850) Starting Zigbee npm ... zigbee.0 2021-02-23 16:43:26.251 info (3850) starting. Version 1.4.4 in /opt/iobroker/node_modules/iobroker.zigbee, node: v14.15.4, js-controller: 3.2.16 zigbee.0 2021-02-23 16:43:22.640 error (3789) Cannot read property 'getEntries' of null@gelberlemmy Nochmal :
das was du gepostet hast sind Folgefehler. Bitte Poste die Log Einträge von 16:30 bis 16:43
A.
ioBroker auf RPi4 - Hardware soweit wie möglich via Zigbee.
"Shit don't work" ist keine Fehlermeldung, sondern ein Fluch. -
@gelberlemmy Nochmal :
das was du gepostet hast sind Folgefehler. Bitte Poste die Log Einträge von 16:30 bis 16:43
A.
@asgothian anbei das Log
2021-02-23 16:37:06.461 - [32minfo[39m: zigbee.0 (2009) Zigbee: allowing new devices to join. 2021-02-23 16:38:07.715 - [32minfo[39m: zigbee.0 (2009) Zigbee: stop joining 2021-02-23 16:38:26.224 - [32minfo[39m: zigbee.0 (2009) Zigbee: allowing new devices to join. 2021-02-23 16:39:27.519 - [32minfo[39m: zigbee.0 (2009) Zigbee: stop joining 2021-02-23 16:39:36.055 - [32minfo[39m: host.raspberrypi stopInstance system.adapter.zigbee.0 (force=false, process=true) 2021-02-23 16:39:36.082 - [32minfo[39m: host.raspberrypi stopInstance system.adapter.zigbee.0 send kill signal 2021-02-23 16:39:36.079 - [32minfo[39m: zigbee.0 (2009) Got terminate signal TERMINATE_YOURSELF 2021-02-23 16:39:36.082 - [32minfo[39m: zigbee.0 (2009) cleaned everything up... 2021-02-23 16:39:36.087 - [32minfo[39m: zigbee.0 (2009) Zigbee: disabling joining new devices. 2021-02-23 16:39:36.501 - [32minfo[39m: zigbee.0 (2009) terminating 2021-02-23 16:39:36.502 - [32minfo[39m: zigbee.0 (2009) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2021-02-23 16:39:36.687 - [32minfo[39m: zwave2.0 (1901) Node 7 is now awake 2021-02-23 16:39:37.139 - [32minfo[39m: host.raspberrypi instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2021-02-23 16:39:39.157 - [32minfo[39m: host.raspberrypi instance system.adapter.zigbee.0 started with pid 3557 2021-02-23 16:39:42.319 - [32minfo[39m: zigbee.0 (3557) starting. Version 1.4.4 in /opt/iobroker/node_modules/iobroker.zigbee, node: v14.15.4, js-controller: 3.2.16 2021-02-23 16:39:42.447 - [32minfo[39m: zigbee.0 (3557) Starting Zigbee npm ... 2021-02-23 16:39:43.334 - [32minfo[39m: zigbee.0 (3557) Installed Version: iobroker.zigbee@1.4.4 2021-02-23 16:39:45.559 - [32minfo[39m: zwave2.0 (1901) Node 7 interview completed, all values are updated 2021-02-23 16:39:46.652 - [32minfo[39m: zwave2.0 (1901) Node 7 is now asleep 2021-02-23 16:40:00.066 - [32minfo[39m: host.raspberrypi instance system.adapter.netatmo-crawler.0 started with pid 3573 2021-02-23 16:40:02.246 - [32minfo[39m: netatmo-crawler.0 (3573) starting. Version 0.3.9 in /opt/iobroker/node_modules/iobroker.netatmo-crawler, node: v14.15.4, js-controller: 3.2.16 2021-02-23 16:40:02.306 - [32minfo[39m: netatmo-crawler.0 (3573) Getting data for stationid:70:ee:50:5f:37:56 2021-02-23 16:40:03.350 - [32minfo[39m: netatmo-crawler.0 (3573) Getting data for stationid:70:ee:50:36:ef:d2 2021-02-23 16:40:04.196 - [32minfo[39m: netatmo-crawler.0 (3573) Terminated (NO_ERROR): Without reason 2021-02-23 16:40:04.736 - [32minfo[39m: host.raspberrypi instance system.adapter.netatmo-crawler.0 terminated with code 0 (NO_ERROR) 2021-02-23 16:40:07.603 - [32minfo[39m: octoprint.0 (1588) OctoPrint API not connected 2021-02-23 16:40:11.422 - [32minfo[39m: host.raspberrypi stopInstance system.adapter.zigbee.0 (force=false, process=true) 2021-02-23 16:40:11.430 - [32minfo[39m: host.raspberrypi stopInstance system.adapter.zigbee.0 send kill signal 2021-02-23 16:40:11.430 - [32minfo[39m: zigbee.0 (3557) Got terminate signal TERMINATE_YOURSELF 2021-02-23 16:40:11.432 - [32minfo[39m: zigbee.0 (3557) cleaned everything up... 2021-02-23 16:40:11.435 - [32minfo[39m: zigbee.0 (3557) Zigbee: disabling joining new devices. 2021-02-23 16:40:11.437 - [33mwarn[39m: zigbee.0 (3557) Failed to stop zigbee during startup 2021-02-23 16:40:11.438 - [32minfo[39m: zigbee.0 (3557) terminating 2021-02-23 16:40:11.439 - [32minfo[39m: zigbee.0 (3557) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2021-02-23 16:40:11.440 - [31merror[39m: zigbee.0 (3557) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). 2021-02-23 16:40:11.441 - [31merror[39m: zigbee.0 (3557) unhandled promise rejection: Cannot read property 'getEntries' of null 2021-02-23 16:40:11.445 - [31merror[39m: zigbee.0 (3557) TypeError: Cannot read property 'getEntries' of null -
@asgothian anbei das Log
2021-02-23 16:37:06.461 - [32minfo[39m: zigbee.0 (2009) Zigbee: allowing new devices to join. 2021-02-23 16:38:07.715 - [32minfo[39m: zigbee.0 (2009) Zigbee: stop joining 2021-02-23 16:38:26.224 - [32minfo[39m: zigbee.0 (2009) Zigbee: allowing new devices to join. 2021-02-23 16:39:27.519 - [32minfo[39m: zigbee.0 (2009) Zigbee: stop joining 2021-02-23 16:39:36.055 - [32minfo[39m: host.raspberrypi stopInstance system.adapter.zigbee.0 (force=false, process=true) 2021-02-23 16:39:36.082 - [32minfo[39m: host.raspberrypi stopInstance system.adapter.zigbee.0 send kill signal 2021-02-23 16:39:36.079 - [32minfo[39m: zigbee.0 (2009) Got terminate signal TERMINATE_YOURSELF 2021-02-23 16:39:36.082 - [32minfo[39m: zigbee.0 (2009) cleaned everything up... 2021-02-23 16:39:36.087 - [32minfo[39m: zigbee.0 (2009) Zigbee: disabling joining new devices. 2021-02-23 16:39:36.501 - [32minfo[39m: zigbee.0 (2009) terminating 2021-02-23 16:39:36.502 - [32minfo[39m: zigbee.0 (2009) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2021-02-23 16:39:36.687 - [32minfo[39m: zwave2.0 (1901) Node 7 is now awake 2021-02-23 16:39:37.139 - [32minfo[39m: host.raspberrypi instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2021-02-23 16:39:39.157 - [32minfo[39m: host.raspberrypi instance system.adapter.zigbee.0 started with pid 3557 2021-02-23 16:39:42.319 - [32minfo[39m: zigbee.0 (3557) starting. Version 1.4.4 in /opt/iobroker/node_modules/iobroker.zigbee, node: v14.15.4, js-controller: 3.2.16 2021-02-23 16:39:42.447 - [32minfo[39m: zigbee.0 (3557) Starting Zigbee npm ... 2021-02-23 16:39:43.334 - [32minfo[39m: zigbee.0 (3557) Installed Version: iobroker.zigbee@1.4.4 2021-02-23 16:39:45.559 - [32minfo[39m: zwave2.0 (1901) Node 7 interview completed, all values are updated 2021-02-23 16:39:46.652 - [32minfo[39m: zwave2.0 (1901) Node 7 is now asleep 2021-02-23 16:40:00.066 - [32minfo[39m: host.raspberrypi instance system.adapter.netatmo-crawler.0 started with pid 3573 2021-02-23 16:40:02.246 - [32minfo[39m: netatmo-crawler.0 (3573) starting. Version 0.3.9 in /opt/iobroker/node_modules/iobroker.netatmo-crawler, node: v14.15.4, js-controller: 3.2.16 2021-02-23 16:40:02.306 - [32minfo[39m: netatmo-crawler.0 (3573) Getting data for stationid:70:ee:50:5f:37:56 2021-02-23 16:40:03.350 - [32minfo[39m: netatmo-crawler.0 (3573) Getting data for stationid:70:ee:50:36:ef:d2 2021-02-23 16:40:04.196 - [32minfo[39m: netatmo-crawler.0 (3573) Terminated (NO_ERROR): Without reason 2021-02-23 16:40:04.736 - [32minfo[39m: host.raspberrypi instance system.adapter.netatmo-crawler.0 terminated with code 0 (NO_ERROR) 2021-02-23 16:40:07.603 - [32minfo[39m: octoprint.0 (1588) OctoPrint API not connected 2021-02-23 16:40:11.422 - [32minfo[39m: host.raspberrypi stopInstance system.adapter.zigbee.0 (force=false, process=true) 2021-02-23 16:40:11.430 - [32minfo[39m: host.raspberrypi stopInstance system.adapter.zigbee.0 send kill signal 2021-02-23 16:40:11.430 - [32minfo[39m: zigbee.0 (3557) Got terminate signal TERMINATE_YOURSELF 2021-02-23 16:40:11.432 - [32minfo[39m: zigbee.0 (3557) cleaned everything up... 2021-02-23 16:40:11.435 - [32minfo[39m: zigbee.0 (3557) Zigbee: disabling joining new devices. 2021-02-23 16:40:11.437 - [33mwarn[39m: zigbee.0 (3557) Failed to stop zigbee during startup 2021-02-23 16:40:11.438 - [32minfo[39m: zigbee.0 (3557) terminating 2021-02-23 16:40:11.439 - [32minfo[39m: zigbee.0 (3557) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2021-02-23 16:40:11.440 - [31merror[39m: zigbee.0 (3557) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). 2021-02-23 16:40:11.441 - [31merror[39m: zigbee.0 (3557) unhandled promise rejection: Cannot read property 'getEntries' of null 2021-02-23 16:40:11.445 - [31merror[39m: zigbee.0 (3557) TypeError: Cannot read property 'getEntries' of nullDas Log besagt das du den Zigbee Adapter gestartet hast
2021-02-23 16:39:43.334 - [32minfo[39m: zigbee.0 (3557) Installed Version: iobroker.zigbee@1.4.4dann aber nach 17 sekunden von hand wieder angehalten hast.
2021-02-23 16:40:11.422 - [32minfo[39m: host.raspberrypi stopInstance system.adapter.zigbee.0 (force=false, process=true) 2021-02-23 16:40:11.430 - [32minfo[39m: host.raspberrypi stopInstance system.adapter.zigbee.0 send kill signalDa stellt sich die Frage warum Du das getan hast.
A.
ioBroker auf RPi4 - Hardware soweit wie möglich via Zigbee.
"Shit don't work" ist keine Fehlermeldung, sondern ein Fluch.
Support us
733
Online32.4k
Benutzer81.4k
Themen1.3m
Beiträge