Material Design Widgets: UniFi Netzwerk Status
-
@cdellasanta
Sorry, bin erst jetzt wieder wach. Bin leider nur unregelmäßig hier
ich habe die ID bisher nur im Link zum Bild gefunden. Vielleicht findet man im Hintergrund da aber mehr.Zum JSON-Fehler: Ich habe die Felder sogar leer. Ich hab mich zuerst um das Skript usw. gekümmert. ich schau mal ob ich da n Debug-Output rein kriege später.
PS: Damit weckst du jetzt natürlich eine Erwartungshaltung bei mir...
PPS: Kann man hier eine Prüfung einbauen ob es gefüllt ist und es sich um ein gültiges JSON handelt? Das müsste es doch dann sein. Ich versuch mich mal, aber meine Kenntnisse sind begrenzt
PPPS: So ist schon mal der Fehler raus bei mir.
-
Ich benutze bereits einen anderen Code
(siehe 30 Dec 2020)const getNote = (idDevice, name, mac, ip) => { try { return JSON.parse(getStateValue(`${idDevice}.note`) || '{}'); } catch (ex) { console.error(`${name} (ip: ${ip}, mac: ${mac}): ${ex.message}`); } return {}; }Aber Achtung, den
getStateValuehabe ich selber geschrieben -
@cdellasanta oh. tatsächlich. ich hab mal dein ganzes Skript und die Views genommen (den blauen Hintergrund rausgeschmissen
) und es geht direkt auch so. Ist es richtig, dass das Skript keine Subscriptions etc mehr anlegt bei dir? Also es funktioniert ja trotzdem mit den Updates - hat mich nur gewundert.javascript.0 2021-01-21 16:07:42.198 info (32251) script.js.common.vis.Unifi-Adapter-Status2: registered 0 subscriptions and 0 schedules javascript.0 2021-01-21 16:07:42.175 info (32251) script.js.common.vis.Unifi-Adapter-Status2: TypeScript compilation successfulHab auch noch einen für deinen Device-List:
UAL6: 'uap/UAL6',
(Unifi6 Lite)PS: Bisher erfüllst du meine neue Erwartungshaltung an die Reaktionszeit
-
@nerg said in Material Design Widgets: UniFi Netzwerk Status:
keine Subscriptions etc mehr anlegt
Es werden schon subscriptions gemacht, nur nicht sofort bei Skript-start (was es im Konsole angezeigt wird) .
Erst ein paar hundert Millisekunden nachher, nachdem es sichergestellt ist dass die alle Status erstellt worden sind, werden die Subscription gemacht. Du kannst es sehen wenn beim javascript Adapter den log level auf "debug" setzest:
So kommen auch keine Fahler beim ersten lauf, oder wenn beim entwickeln den
resetStatesOnReloadauf Wahr gesetzt ist, in den Fall bei jede Skript-start werden die Stati erneut erstellt, und du würdest viel mehr sehen:
@nerg said in Material Design Widgets: UniFi Netzwerk Status:
(den blauen Hintergrund rausgeschmissen )
Ja im lightmode sieht nicht so schön aus, aber imdarkmode ist es notwendig.
-
Hallo Zusammen,
mir ist aufgefallen das die Link funktion nicht mehr geht.
{ "image": "CCU2", "icon": "", "link": "http" }Aber klicke ich in der Übersicht drauf passiert nichts. Habe ich noch irgendwo etwas übersehen?
Zusätzlich Frage ich mich woher die 0 in den dropdown menüs kommt? Hab nur ich die?
Vielen Dank für Feedback. -
@tobasium Das klappt an sich wunderbar. Du musst im Skript aber definieren , was passieren soll. Nutzt du die Topappbar mit viewinwidget8, dann musst du den Datenpunkt angeben, den deine Toppappbar nutzt und die Zahl die dort rein muss für die Deviceview. oder du setzt es auf false, wenn es ins neue Tab soll.
const devicesView = {currentViewState: '0_userdata.0.vis.MaterialDesignWidgets.topappbar', devicesViewKey: 11};@cdellasanta : Mach das doch über die Binds
Mir kam grad doch noch ne Frage - wie umgehe ich bei UniFi-Devices das Problem, dass das Bild nicht angezeigt wird (unauthorized). Kann man das hinkriegen ?
-
@tobasium said in Material Design Widgets: UniFi Netzwerk Status:
Aber klicke ich in der Übersicht drauf passiert nichts. Habe ich noch irgendwo etwas übersehen?
Setze mal
const devicesView = false;und sehe ob es funktioniert mit einen neunen Fenster.@tobasium said in Material Design Widgets: UniFi Netzwerk Status:
woher die 0 in den dropdown menüs kommt? Hab nur ich die?
Es sollten die übersetzten Texte kommen (abhängig von der Sprache der du im Skript konfiguriert hast .. )
@nerg said in Material Design Widgets: UniFi Netzwerk Status:
@cdellasanta : Mach das doch über die Binds
wes meinst mit Binds .. eventuell kenne ich es auch (noch) nicht .. bin auch relativ neu im ioBroker -
@nerg @cdellasanta Also ich bekomme das nicht hin.
const devicesView = false;
17:48:22.063 error javascript.0 (13577) script.js.Smarthome_Tobi.System.Unifi-Netzwerk: TypeScript compilation failed: initializeState(`${statePrefix}.selectedUrl`, '', { name: 'Selected device link: selectedUrl', type: 'string' }, 'any', () => { setState(devicesView.currentViewState, devicesView.devicesViewKey); }); // On selected device change, go to "Devices" view ^ ERROR: Property 'currentViewState' does not exist on type 'never'. initializeState(`${statePrefix}.selectedUrl`, '', { name: 'Selected device link: selectedUrl', type: 'string' }, 'any', () => { setState(devicesView.currentViewState, devicesView.devicesViewKey); }); // On selected device change, go to "Devices" view ^ ERROR: Property 'devicesViewKey' does not exist on type 'never'.//
Wo konfiguriere ich die Sprache im script? Oder besser gesagt wie?
-
@tobasium said in Material Design Widgets: UniFi Netzwerk Status:
Da lauft was komisch .. wenn
devicesView = falsesollte gar kein Fehler bringen in den abschnitt .. und sowieso keinTypeScript compilation failedKontrolliere dein kode dass es nicht irgendwie tippfehler drin sind, und starte neu den javascript Adapter
-
@cdellasanta der Fehler kommt ja nur sobald ich diesen Bereich hier abändere: Zeile 39/40
// Optional: display links into a separate view, instead of new navigation window (set false to disable this feature) const devicesView = {currentViewState: '0_userdata.0.vis.currentView', devicesViewKey: 1};/** * Listings for UniFi devices (to use with Material Design Widgets) * * Requirements: * - UniFi controller permanently running on your network * - UniFi ioBroker adapter >= 0.5.8 (https://www.npmjs.com/package/iobroker.unifi) * - Library "moment" in the "Additional npm modules" of the javascript.0 adapter configuration * - Some programming skills * * @license http://www.opensource.org/licenses/mit-license.html MIT License * @author Scrounger <Scrounger@gmx.net> * @author web4wasch @WEB4WASCH * @author cdellasanta <70055566+cdellasanta@users.noreply.github.com> * @link https://forum.iobroker.net/topic/30875/material-design-widgets-unifi-netzwerk-status */ // Script configuration const statePrefix = '0_userdata.0.vis.NetzwerkDevicesStatus'; // Might be better to use an english statePrefix (e.g. '0_userdata.0.vis.unifiNetworkState'), but then remember to adapt the Views too const defaultLocale = 'de'; const lastDays = 7; // Show devices that have been seen in the network within the last X days const byteUnits = 'SI'; // SI units use the Metric representation based on 10^3 (1'000) as a order of magnitude // IEC units use 2^10 (1'024) as an order of magnitude const defaultSortMode = 'connected'; // Value for default and reset sort const sortResetAfter = 120; // Reset sort value after X seconds (0=disabled) const filterResetAfter = 120; // Reset filter after X seconds (0=disabled) const imagesPath = '/vis.0/main/Meine_Icons/Netzwerk/'; // Path for images // Optional: Path prefix for UniFi device images (see getUnifiImage function for deeper information on how to extract it for your network) // @todo Could take controller host and port from the unifi adapter configuration, but thene there is still the angular subdirectory that needs to be configured .. // const unifiImagesUrlPrefix = 'https://<your-controller-ip-or-host>:<controller-port>/manage/angular/g7989b19/images/devices/'; // const unifiImagesUrlPrefix = null; // Use the 'lan_noImage.png' for all devices const unifiImagesUrlPrefix = false; // Use '<device model>.png' from your imagesPath // Optional: display links into a separate view, instead of new navigation window (set false to disable this feature) const devicesView = {currentViewState: '0_userdata.0.vis.currentView', devicesViewKey: 1}; const offlineTextSize = 14; const infoIconSize = 20; const infoTextSize = 14; const performances = { none: { color: 'grey', experience: 'speedometer', speedLan: 'network-off', speedWifi: 'wifi-off' }, good: { color: 'green', experience: 'speedometer', speedLan: 'network', speedWifi: 'signal-cellular-3' }, low: { color: '#ff9800', experience: 'speedometer-medium', speedLan: 'network', speedWifi: 'signal-cellular-2' }, bad: { color: 'FireBrick', experience: 'speedometer-slow', speedLan: 'network', speedWifi: 'signal-cellular-1' } }; // ********************************************************************************************************************************************************************** // Modules: should not need to 'import' them (ref: https://github.com/ioBroker/ioBroker.javascript/blob/c2725dcd9772627402d0e5bc74bf69b5ed6fe375/docs/en/javascript.md#require---load-some-module), // but to avoid TypeScript inspection errors, doing it anyway ... // import * as moment from "moment"; // Should work, but typescript raises exception ... const moment = require('moment'); // Initialization create/delete states, register listeners // Using my global functions (see global script common-states-handling ) /** For this script to work as standalone, the following 4 functions have been inlined at the end of script, * if you place them in a global script, then you need to uncomment following "declare" statements **/ // declare function runAfterInitialization(callback: CallableFunction): void; // declare function initializeState(stateId: string, defaultValue: any, common: object, listenerChangeType?: string, listenerCallback?: CallableFunction): void; // declare function getStateIfExists(stateId: string): any; // declare function getStateValue(stateId: string): any; const getLocale = () => getStateValue('0_userdata.0.vis.locale') || defaultLocale; initializeState(`${statePrefix}.jsonList`, '[]', {name: 'UniFi devices listing: jsonList', type: 'string'}); // Change on sort mode triggers list generation and reset of sort-timer-reset initializeState(`${statePrefix}.sortMode`, defaultSortMode, {name: 'UniFi device listing: sortMode', type: 'string'}, 'any', () => { updateDeviceLists(); resetSortTimer(); }); // Change on filter mode triggers list generation and reset of filter-timer-reset initializeState(`${statePrefix}.filterMode`, '', {name: 'UniFi device listing: filterMode', type: 'string'}, 'any', () => { updateDeviceLists(); resetFilterTimer(); }); // Sorters, filters and some additional translations are saved in states to permit texts localization initializeState(`${statePrefix}.sortersJsonList`, '{}', {name: 'UniFi device listing: sortersJsonList', type: 'string', read: true, write: false}); initializeState(`${statePrefix}.filtersJsonList`, '{}', {name: 'UniFi device listing: filtersJsonList', type: 'string', read: true, write: false}); initializeState(`${statePrefix}.translations`, '{}', {name: 'UniFi device listing: viewTranslations', type: 'string', read: true, write: false}); if (devicesView) { initializeState(`${statePrefix}.linksJsonList`, '[]', {name: 'Device links listing: linksJsonList', type: 'string'}); initializeState(`${statePrefix}.selectedUrl`, '', {name: 'Selected device link: selectedUrl', type: 'string'}, 'any', () => { setState(devicesView.currentViewState, devicesView.devicesViewKey); }); // On selected device change, go to "Devices" view } // On locale change, setup correct listings if (existsState('0_userdata.0.vis.locale')) { runAfterInitialization(() => on('0_userdata.0.vis.locale', 'ne', setup)); } runAfterInitialization(() => { setup(); // Refresh lists every time the unifi adapter has updated its data on('unifi.0.info.connection','any', updateDeviceLists); }); function setup(): void { setTimeLocale(); setSortItems(); setFilterItems(); setViewTranslations(); // Fill lists updateDeviceLists(); } function updateDeviceLists() { const getNote = (idDevice, name, mac, ip) => { try { return JSON.parse(getStateValue(`${idDevice}.note`) || '{}'); } catch (ex) { console.error(`${name} (ip: ${ip}, mac: ${mac}): ${ex.message}`); } return {}; } try { // Selector help: https://github.com/ioBroker/ioBroker.javascript/blob/master/docs/en/javascript.md#---selector let devices = $('state[id=unifi\.0\.default\.*\.*\.mac]'); // Query every time function is called (for new devices) let deviceList = []; for (var i = 0; i <= devices.length - 1; i++) { let [,,, deviceType, mac] = devices[i].split('.'); // Only 'clients' and 'devices' are allowed (not 'alerts' ... can't exclude direclty on selector ...) if (!['clients', 'devices'].includes(deviceType)) { continue; } let idDevice = devices[i].replace('.mac', ''); let unifiDevice = deviceType === 'devices'; let isWired = getStateValue(`${idDevice}.is_wired`) || unifiDevice; let lastSeen = new Date(getStateValue(`${idDevice}.last_seen`)); // For clients, if lastSeen difference is bigger than lastDays, then skip the device if (!unifiDevice && (new Date().getTime() - lastSeen.getTime()) > lastDays * 86400 * 1000) { continue; } // Values for all device types and connection let isConnected = getStateValue(`${idDevice}.is_online`) || unifiDevice; let ip = getStateValue(`${idDevice}.ip`) || ''; let name = getStateValue(`${idDevice}.name`) || getStateValue(`${idDevice}.hostname`) || ip || mac; let isGuest = getStateValue(`${idDevice}.is_guest`); let note = getNote(idDevice, name, mac, ip); let received = getStateValue(`${idDevice}.${unifiDevice || !isWired ? '' : 'wired-'}tx_bytes`) || 0; let sent = getStateValue(`${idDevice}.${unifiDevice || !isWired ? '' : 'wired-'}rx_bytes`) || 0; let uptime = getStateValue(`${idDevice}.uptime`); let experience = getStateValue(`${idDevice}.satisfaction`) || (isConnected ? 100 : 0); // For LAN devices I got null as expirience .. file a bug? let additionalInfoItems = ''; const infoItem = (icon, color, text) => `<span style="margin: 0 2px"> <span class="mdi mdi-${icon}" style="color: ${color}; font-size: ${infoIconSize}px; "></span> <span style="color: grey; font-family: RobotoCondensed-LightItalic; font-size: ${infoTextSize}px; margin-left: 2px;">${text}</span> </span>`; if (unifiDevice) { let cpu = getStateValue(`${idDevice}.system-stats.cpu`) || 0; let mem = getStateValue(`${idDevice}.system-stats.mem`) || 0; let cpuPerformance = !isConnected ? 'none' : (cpu <= 70 ? 'good' : (cpu <= 90 ? 'low' : 'bad')); let memPerformance = !isConnected ? 'none' : (mem <= 70 ? 'good' : (mem <= 90 ? 'low' : 'bad')); // The icons do not really fit, there is no good option for a "ram memory bank" in https://materialdesignicons.com/ additionalInfoItems += infoItem(/*'cpu-64-bit'*/ 'memory', performances[cpuPerformance].color, `${cpu}%`); additionalInfoItems += infoItem(/*'memory' 'expansion-card-variant'*/ 'sd', performances[memPerformance].color, `${mem}%`); } else { let experiencePerformance = !isConnected ? 'none' : (experience >= 70 ? 'good' : (experience >= 40 ? 'low' : 'bad')); let speedText = ''; let speedPerformance = 'none'; if (isWired) { // If exists prefer uptime on switch port uptime = getStateValue(`${idDevice}.uptime_by_usw`) || uptime; let switchMac = getStateValue(`${idDevice}.sw_mac`) || false; let switchPort = getStateValue(`${idDevice}.sw_port`) || false; if (switchMac && switchPort) { let speed = getStateValue(`unifi.0.default.devices.${switchMac}.port_table.port_${switchPort}.speed`) || 0; speedText = speed === 0 ? '' : (speed < 1000 ? (speed + ' Mbit/s') : (speed/1000 + ' Gbit/s')); speedPerformance = !isConnected ? 'none' : (speed == 1000 ? 'good' : 'low'); } // Do not consider fiber ports if (switchPort > 24) { // @todo On some switches the fiber port is already on port 9 .. there are surely better ways to recognise a fiber port // @todo This is legacy code, why are devices connected to fiber ports not of interest? continue; // Skip device } } else { let channel = getStateValue(`${idDevice}.channel`); let signal = getStateValue(`${idDevice}.signal`); speedText = channel === null ? '' : (channel > 13 ? '5G' : '2G'); speedPerformance = !isConnected ? 'none' : (signal >= -55 ? 'good' : (signal >= -70 ? 'low' : 'bad')); } additionalInfoItems += infoItem(performances[speedPerformance][isWired ? 'speedLan' : 'speedWifi'], performances[speedPerformance].color, speedText); additionalInfoItems += infoItem(performances[experiencePerformance].experience, performances[experiencePerformance].color, `${experience}%`); } deviceList.push({ // Visualization data (tplVis-materialdesign-Icon-List) statusBarColor: isConnected ? 'green' : 'FireBrick', text: isGuest ? `<span class="mdi mdi-account-box" style="color: #ff9800;">${name}</span>` : name, subText: ` ${ip} <div style="display: flex; flex-direction: row; padding-left: 8px; padding-right: 8px; align-items: center; justify-content: center;"> <span style="color: grey; font-size: ${offlineTextSize}px; line-height: 1.3; font-family: RobotoCondensed-LightItalic;"> ${translate(isConnected ? 'online' : 'offline')} ${(isConnected ? moment().subtract(uptime, 's') : moment(lastSeen)).fromNow()} </span> </div> <div style="display: flex; flex-direction: row; padding-left: 4px; padding-right: 4px; margin-top: 10px; align-items: center;"> <div style="display: flex; flex: 1; text-align: left; align-items: center; position: relative;"> ${infoItem('arrow-down', '#44739e', formatBytes(received, byteUnits))} ${infoItem('arrow-up', '#44739e', formatBytes(sent, byteUnits))} </div> <div style="display: flex; margin-left: 8px; align-items: center;"> ${additionalInfoItems} </div> </div> `, listType: !note.link ? 'text' : 'buttonLink', buttonLink: !note.link ? '' : (['http', 'https'].includes(note.link) ? `${note.link}://${ip}` : note.link), image: unifiDevice ? getUnifiImage(getStateValue(`${idDevice}.model`)) : (imagesPath + (note.image ? note.image : ((isWired ? 'lan' : 'wlan') + '_noImage')) + '.png'), icon: note.icon || '', // Additional data used for list sorting name: name, ip: ip, connected: isConnected, received: received, sent: sent, experience: experience, uptime: uptime, isWired: isWired, isUnifi: unifiDevice }); } // Sorting let sortMode = getStateValue(`${statePrefix}.sortMode`); deviceList.sort((a, b) => { switch (sortMode) { case 'ip': const na = Number(a['ip'].split(".").map(v => `000${v}`.slice(-3)).join('')); const nb = Number(b['ip'].split(".").map(v => `000${v}`.slice(-3)).join('')); return na - nb; case 'connected': case 'received': case 'sent': case 'experience': case 'uptime': return a[sortMode] === b[sortMode] ? 0 : +(a[sortMode] < b[sortMode]) || -1; case 'name': default: return a['name'].localeCompare(b['name'], getLocale(), {sensitivity: 'base'}); } }); if (devicesView) { // Create links list (before filtering) let linkList = []; deviceList.forEach(obj => { if (obj.listType === 'buttonLink') { linkList.push({ // Visualization data (tplVis-materialdesign-Select) text: obj.name, value: obj.buttonLink, icon: obj.icon /** @todo Add some properties (connected, ip, received, sent, experience, ...)? */ }); // Change behaviour from 'buttonLink' to 'buttonState', // a listener on the state change of the objectId will trigger the jump to the devices view obj['listType'] = 'buttonState'; obj['objectId'] = `${statePrefix}.selectedUrl`; obj['showValueLabel'] = false; obj['buttonStateValue'] = obj.buttonLink; delete obj['buttonLink']; } }); let linkListString = JSON.stringify(linkList); if (getStateValue(`${statePrefix}.linksJsonList`) !== linkListString) { setState(`${statePrefix}.linksJsonList`, linkListString, true); } } // Filtering let filterMode = getStateValue(`${statePrefix}.filterMode`) || ''; if (filterMode && filterMode !== '') { deviceList = deviceList.filter(item => { switch (filterMode) { case 'connected': return item.connected; case 'disconnected': return !item.connected; case 'lan': return item.isWired; case 'wlan': return !item.isWired; case 'unifi': return item.isUnifi; default: return false; // Unknown filter, return no item } }); } let result = JSON.stringify(deviceList); if (getStateValue(`${statePrefix}.jsonList`) !== result) { setState(`${statePrefix}.jsonList`, result, true); } } catch (err) { console.error(`[updateDeviceLists] error: ${err.message}`); console.error(`[updateDeviceLists] stack: ${err.stack}`); } log(`Updated lists`, 'debug'); } let sortTimeoutID; function resetSortTimer() { if (sortResetAfter > 0) { clearTimeout(sortTimeoutID); // If set then clear previous timer sortTimeoutID = setTimeout(() => setState(`${statePrefix}.sortMode`, defaultSortMode), sortResetAfter * 1000); } } let filterTimeoutID; function resetFilterTimer() { if (filterResetAfter > 0) { clearTimeout(filterTimeoutID); // If set then clear previous timer filterTimeoutID = setTimeout(() => setState(`${statePrefix}.filterMode`, ''), filterResetAfter * 1000); } } function setTimeLocale(): void { let locale = getLocale(); moment.locale(locale); moment.updateLocale(locale, { relativeTime: { future: translate('in %s'), past: translate('since %s'), // Default for past is '%s ago' s: translate('a few seconds'), ss: translate('%d seconds'), m: translate('a minute'), mm: translate('%d minutes'), h: translate('an hour'), hh: translate('%d hours'), d: translate('a day'), dd: translate('%d days'), w: translate('a week'), ww: translate('%d weeks'), M: translate('a month'), MM: translate('%d months'), y: translate('a year'), yy: translate('%d years') } }); } function setSortItems(): void { setState( `${statePrefix}.sortersJsonList`, JSON.stringify([ { text: translate('Name'), value: 'name', icon: 'sort-alphabetical-variant' }, { text: translate('IP address'), value: 'ip', icon: 'information-variant' }, { text: translate('Connected'), value: 'connected', icon: 'check-network' }, { text: translate('Received data'), value: 'received', icon: 'arrow-down' }, { text: translate('Sent data'), value: 'sent', icon: 'arrow-up' }, { text: translate('Experience'), value: 'experience', icon: 'speedometer' }, { text: translate('Uptime'), value: 'uptime', icon: 'clock-check-outline' } ]), true ); } function setFilterItems(): void { setState( `${statePrefix}.filtersJsonList`, JSON.stringify([ { text: translate('connected'), value: 'connected', icon: 'check-network' }, { text: translate('disconnected'), value: 'disconnected', icon: 'network-off' }, { text: translate('LAN connection'), value: 'lan', icon: 'network' }, { text: translate('WLAN connection'), value: 'wlan', icon: 'wifi' }, { text: translate('UniFi network devices'), value: 'unifi', icon: 'router-network' } ]), true ); } function setViewTranslations(): void { setState( `${statePrefix}.translations`, JSON.stringify([ 'Sort by', 'Filter by', 'Device' ].reduce((o, key) => ({...o, [key]: translate(key)}), {})), true ); } function translate(enText) { const map = { // For translations used https://translator.iobroker.in (that uses Google translator) // Sort items 'Name': {de: 'Name', ru: 'имя', pt: 'Nome', nl: 'Naam', fr: 'Nom', it: 'Nome', es: 'Nombre', pl: 'Nazwa','zh-cn': '名称'}, 'IP address': {de: 'IP Adresse', ru: 'Aйпи адрес', pt: 'Endereço de IP', nl: 'IP adres', fr: 'Adresse IP', it: 'Indirizzo IP', es: 'Dirección IP', pl: 'Adres IP','zh-cn': 'IP地址'}, 'Connected': {de: 'Verbunden', ru: 'Связано', pt: 'Conectado', nl: 'Verbonden', fr: 'Connecté', it: 'Collegato', es: 'Conectado', pl: 'Połączony','zh-cn': '连接的'}, 'Received data': {de: 'Daten empfangen', ru: 'Полученные данные', pt: 'Dados recebidos', nl: 'Ontvangen data', fr: 'Données reçues', it: 'Dati ricevuti', es: 'Datos recibidos', pl: 'Otrzymane dane','zh-cn': '收到资料'}, 'Sent data': {de: 'Daten gesendet', ru: 'Отправленные данные', pt: 'Dados enviados', nl: 'Verzonden gegevens', fr: 'Données envoyées', it: 'Dati inviati', es: 'Datos enviados', pl: 'Wysłane dane','zh-cn': '发送数据'}, 'Experience': {de: 'Erlebnis', ru: 'Опыт', pt: 'Experiência', nl: 'Ervaring', fr: 'Expérience', it: 'Esperienza', es: 'Experiencia', pl: 'Doświadczenie','zh-cn': '经验'}, 'Uptime': {de: 'Betriebszeit', ru: 'Время безотказной работы', pt: 'Tempo de atividade', nl: 'Uptime', fr: 'Disponibilité', it: 'Disponibilità', es: 'Tiempo de actividad', pl: 'Dostępność','zh-cn': '正常运行时间'}, // Filter Items 'connected': {de: 'verbunden', ru: 'связано', pt: 'conectado', nl: 'verbonden', fr: 'connecté', it: 'collegato', es: 'conectado', pl: 'połączony','zh-cn': '连接的'}, 'disconnected': {de: 'nicht verbunden', ru: 'отключен', pt: 'desconectado', nl: 'losgekoppeld', fr: 'débranché', it: 'disconnesso', es: 'desconectado', pl: 'niepowiązany','zh-cn': '断开连接'}, 'LAN connection': {de: 'LAN Verbindungen', ru: 'подключение по локальной сети', pt: 'conexão LAN', nl: 'LAN-verbinding', fr: 'connexion LAN', it: 'connessione LAN', es: 'coneccion LAN', pl: 'połączenie LAN','zh-cn': '局域网连接'}, 'WLAN connection': {de: 'WLAN Verbindungen', ru: 'поединение WLAN', pt: 'conexão WLAN', nl: 'WLAN-verbinding', fr: 'connexion WLAN', it: 'connessione WLAN', es: 'conexión WLAN', pl: 'połączenie WLAN','zh-cn': 'WLAN连接'}, 'UniFi network devices': {de: 'UniFi-Netzwerkgeräte', ru: 'Сетевые устройства UniFi', pt: 'Dispositivos de rede UniFi', nl: 'UniFi-netwerkapparaten', fr: 'Périphériques réseau UniFi', it: 'Dispositivi di rete UniFi', es: 'Dispositivos de red UniFi', pl: 'Urządzenia sieciowe UniFi', 'zh-cn': 'UniFi网络设备'}, // Additional view translations 'Sort by': {de: 'Sortieren nach', ru: 'Сортировать по', pt: 'Ordenar por', nl: 'Sorteer op', fr: 'Trier par', it: 'Ordina per', es: 'Ordenar por', pl: 'Sortuj według', 'zh-cn': '排序方式'}, 'Filter by': {de: 'Filtern nach', ru: 'Сортировать по', pt: 'Filtrar por', nl: 'Filteren op', fr: 'Filtrer par', it: 'Filtra per', es: 'Filtrado por', pl: 'Filtruj według','zh-cn': '过滤'}, 'Device': {de: 'Gerät', ru: 'Устройство', pt: 'Dispositivo', nl: 'Apparaat', fr: 'Dispositif', it: 'Dispositivo', es: 'Dispositivo', pl: 'Urządzenie','zh-cn': '设备'}, // On/off times 'online': {de: 'online', ru: 'онлайн', pt: 'conectados', nl: 'online', fr: 'en ligne', it: 'in linea', es: 'en línea', pl: 'online', 'zh-cn': "线上"}, 'offline': {de: 'offline', ru: 'не в сети', pt: 'desligada', nl: 'offline', fr: 'hors ligne', it: 'disconnesso', es: 'desconectado', pl: 'offline', 'zh-cn': "离线"}, // Relative times 'in %s': {de: 'in %s', ru: 'через %s', pt: 'em %s', nl: 'in %s', fr: 'en %s', it: 'in %s', es: 'en %s', pl: 'w %s','zh-cn': '在％s中'}, 'since %s': {de: 'seit %s', ru: 'поскольку %s', pt: 'desde %s', nl: 'sinds %s', fr: 'depuis %s', it: 'da %s', es: 'desde %s', pl: 'od %s','zh-cn': '自％s'}, 'a few seconds': {de: 'ein paar Sekunden', ru: 'несколько секунд', pt: 'alguns segundos', nl: 'een paar seconden', fr: 'quelques secondes', it: 'pochi secondi', es: 'unos pocos segundos', pl: 'kilka sekund','zh-cn': '几秒钟'}, '%d seconds': {de: '%d Sekunden', ru: '%d секунд', pt: '%d segundos', nl: '%d seconden', fr: '%d secondes', it: '%d secondi', es: '%d segundos', pl: '%d sekund','zh-cn': '％d秒'}, 'a minute': {de: 'eine Minute', ru: 'минута', pt: 'um minuto', nl: 'een minuut', fr: 'une minute', it: 'un minuto', es: 'un minuto', pl: 'minutę','zh-cn': '一分钟'}, '%d minutes': {de: '%d Minuten', ru: '%d минут', pt: '%d minutos', nl: '%d minuten', fr: '%d minutes', it: '%d minuti', es: '%d minutos', pl: '%d minut','zh-cn': '％d分钟'}, 'an hour': {de: 'eine Stunde', ru: 'час', pt: 'uma hora', nl: 'een uur', fr: 'une heure', it: 'un\'ora', es: 'una hora', pl: 'godzina','zh-cn': '一小时'}, '%d hours': {de: '%d Stunden', ru: '%d часов', pt: '%d horas', nl: '%d uur', fr: '%d heures', it: '%d ore', es: '%d horas', pl: '%d godzin','zh-cn': '％d小时'}, 'a day': {de: 'ein Tag', ru: 'день', pt: 'um dia', nl: 'een dag', fr: 'un jour', it: 'un giorno', es: 'un día', pl: 'dzień','zh-cn': '一天'}, '%d days': {de: '%d Tage', ru: '%d дней', pt: '%d dias', nl: '%d dagen', fr: '%d jours', it: '%d giorni', es: '%d días', pl: '%d dni','zh-cn': '％d天'}, 'a week': {de: 'eine Woche', ru: 'неделя', pt: 'uma semana', nl: 'een week', fr: 'une semaine', it: 'una settimana', es: 'una semana', pl: 'tydzień','zh-cn': '一周'}, '%d weeks': {de: '%d Wochen', ru: '%d недель', pt: '%d semanas', nl: '%d weken', fr: '%d semaines', it: '%d settimane', es: '%d semanas', pl: '%d tygodni','zh-cn': '％d周'}, 'a month': {de: 'ein Monat', ru: 'месяц', pt: 'um mês', nl: 'een maand', fr: 'un mois', it: 'un mese', es: 'un mes', pl: 'miesiąc','zh-cn': '一个月'}, '%d months': {de: '%d Monate', ru: '%d месяцев', pt: '%d meses', nl: '%d maanden', fr: '%d mois', it: '%d mesi', es: '%d meses', pl: '%d miesięcy','zh-cn': '％d个月'}, 'a year': {de: 'ein Jahr', ru: 'год', pt: 'um ano', nl: 'een jaar', fr: 'une année', it: 'un anno', es: 'un año', pl: 'rok','zh-cn': '一年'}, '%d years': {de: '%d Jahre', ru: '%d лет', pt: '%d anos', nl: '%d jaar', fr: '%d années', it: '%d anni', es: '%d años', pl: '%d lat','zh-cn': '％d年'} }; return (map[enText] || {})[getLocale()] || enText; } function formatBytes(bytes, unit?: 'SI' | 'IEC') : string { if (bytes === 0) return 'N/A'; const orderOfMagnitude = unit === 'SI' ? Math.pow(10, 3) : Math.pow(2, 10); const abbreviations = unit === 'SI' ? ['Bytes', 'kB', 'MB', 'GB', 'TB', 'PB', 'EB', 'ZB', 'YB'] : ['Bytes', 'KiB', 'MiB', 'GiB', 'TiB', 'PiB', 'EiB', 'ZiB', 'YiB']; const i = Math.floor(Math.log(bytes) / Math.log(orderOfMagnitude)); return parseFloat((bytes / Math.pow(orderOfMagnitude, i)).toFixed(3).substring(0, 4)) + ' ' + abbreviations[i]; } function getUnifiImage(deviceModel: string): string { // For unifi devices, there is no 'note' where an image information can be stored, but we have the // device 'model' that provides enough information for the choice of the correct image. // The images themselves are on your network, hosted by the UniFi controller for its devices grid view. // Example for my 3 device models (extract using developer console: see backround-image of element): // * US16P150: https://10.10.10.5:8443/manage/angular/g7989b19/images/devices/usw/US16/grid.png // * U7LT: https://10.10.10.5:8443/manage/angular/g7989b19/images/devices/uap/default/grid.png // * UGW3: https://10.10.10.5:8443/manage/angular/g7989b19/images/devices/ugw/UGW3/grid.png // From the divice model we need some insight to get to the image URL, this is provided by the app.css // of the Unifi Controller (I used mine with version 5.13.29) // Following list is obtained with some reverse engeeniring: downloaded minified app.css, reformatted code with Phpstorm, then regex-replace: "\.unifiDeviceIcon--([^.]+)\.is-grid[^{]+\{\s+background-image: url\("\.\./images/devices/([^"]+)grid\.png\"\)" with "deviceModel['$1'] = '$2';", ant then some additional parsing .. const unifiControllerimagesPaths = {BZ2: 'uap/BZ2', BZ2LR: 'uap/BZ2', p2N: 'uap/p2N', U2HSR: 'uap/U2HSR', U2IW: 'uap/U2IW', U2L48: 'uap/BZ2', U2Lv2: 'uap/BZ2', U2M: 'uap/default', U2O: 'uap/U2O', U2S48: 'uap/BZ2', U2Sv2: 'uap/BZ2', U5O: 'uap/U2O', U7E: 'uap/U7E', U7EDU: 'uap/U7EDU', U7Ev2: 'uap/U7E', U7HD: 'uap/default', U7IW: 'uap/U7IW', U7IWP: 'uap/U7IW', U7LR: 'uap/default', U7LT: 'uap/default', U7MP: 'uap/U7O', U7MSH: 'uap/U7MSH', U7NHD: 'uap/U7NHD', U7O: 'uap/U7O', UFLHD: 'uap/UFLHD', U7P: 'uap/default', U7PG2: 'uap/default', U7SHD: 'uap/default', UCMSH: 'uap/default', UCXG: 'uap/default', UHDIW: 'uap/U7IW', ULTE: 'uap/ULTE', UXSDM: 'uap/UXSDM', UXBSDM: 'uap/UXBSDM', UDMB: 'uap/UDMB', UP1: 'uap/UP1', UBB: 'ubb/UBB', UGW3: 'ugw/UGW3', UGW4: 'ugw/UGW4', UGWXG: 'ugw/UGWXG', S216150: 'usw/US16', S224250: 'usw/US24', S224500: 'usw/US24', S248500: 'usw/US48', S248750: 'usw/US48', S28150: 'usw/US8P150', UDC48X6: 'usw/UDC48X6', US16P150: 'usw/US16', US24: 'usw/US24', US24P250: 'usw/US24', US24P500: 'usw/US24', US24PL2: 'usw/US24', US24PRO: 'usw/US24PRO', US24PRO2: 'usw/US24PRO2', US48: 'usw/US48', US48P500: 'usw/US48', US48P750: 'usw/US48', US48PL2: 'usw/US48', US48PRO: 'usw/US48PRO', US48PRO2: 'usw/US48PRO2', US6XG150: 'usw/US6XG150', US8: 'usw/US8', US8P150: 'usw/US8P150', US8P60: 'usw/US8P60', USC8: 'usw/US8', USC8P450: 'usw/USC8P450', USF5P: 'usw/USF5P', USXG: 'usw/USXG', USL8LP: 'usw/USL8LP', USL16LP: 'usw/USL16LP', USL16P: 'usw/USL16P', USL24: 'usw/USL24', USL48: 'usw/USL48', USL24P: 'usw/USL24P', USL48P: 'usw/USL48P', USMINI: 'usw/USMINI', USPRPS: 'usw/USPRPS', UAS: 'uas/UAS', UCK: 'uas/UCK', UCKG2: 'uas/UCKG2', UCKP: 'uas/UCKP', UMAD: 'ua/UMAD', UDM: 'udm/UDM', 'UDM-UAP': 'udm/UDM-UAP', 'UDM-USW': 'udm/UDM-USW', 'UDM-UGW': 'udm/UDM-UGW', UDMSE: 'udm/UDMSE', 'UDMSE-UAP': 'udm/UDM-UAP', 'UDMSE-USW': 'udm/UDM-USW', 'UDMSE-UGW': 'udm/UDM-UGW', UDMPRO: 'udm/UDMPRO', 'UDMPRO-USW': 'udm/UDMPRO-USW', 'UDMPRO-UGW': 'udm/UDMPRO-UGW'}; // If prefix set to null return the 'lan_noImage.png' for all devices, if set to false return '<device model>.png' if (!unifiImagesUrlPrefix) { return imagesPath + (unifiImagesUrlPrefix === null ? 'lan_noImage' : deviceModel) + '.png'; } return unifiImagesUrlPrefix + unifiControllerimagesPaths[deviceModel] + '/grid.png'; } /** Global functions ********************************************************************************/ // My global functions for state and listener initialization // see doc https://github.com/ioBroker/ioBroker.javascript/blob/master/docs/en/javascript.md#global-functions const resetStatesOnReload = false; // Enable only when actively developing let statesInitializing = 0; // Semaphore for runAfterInitialization, handled by initializeState // Helper function for states setup function runAfterInitialization(callback) { log(`States initializing: ${statesInitializing}`, 'silly'); if (statesInitializing <= 0) { callback(); return; } // Important: use timout instead of wait! setTimeout(() => runAfterInitialization(callback), 100); } function initializeState(stateId, defaultValue, common, listenerChangeType?: string, listenerCallback?: CallableFunction) { const registerListener = () => { if (listenerChangeType) { // Register listener only after all states are initialized runAfterInitialization(() => { on(stateId, listenerChangeType, listenerCallback); log(`Registered listener on ${stateId}`, 'debug'); }); } }; const myCreateState = () => { statesInitializing++; log(`myCreateState: increased states initializing: ${statesInitializing}`, 'silly'); createState(stateId, defaultValue , common, () => { log(`Created state ${stateId}`, 'debug'); registerListener(); statesInitializing--; log(`myCreateState: reduced states initializing: ${statesInitializing}`, 'silly'); }); }; const resetState = () => { statesInitializing++; log(`resetState: increased states initializing: ${statesInitializing}`, 'silly'); deleteState(stateId, () => { log(`Deleted state ${stateId}`, 'debug'); myCreateState(); statesInitializing--; log(`resetState: reduced states initializing: ${statesInitializing}`, 'silly'); }); } if (!existsState(stateId)) { myCreateState(); } else if (resetStatesOnReload) { resetState(); } else { registerListener(); } } function getStateIfExists(stateId) { // Avoid warning when state does not exists if (!existsState(stateId)) { return null; } return getState(stateId); } function getStateValue(stateId) { return (getStateIfExists(stateId) || {}).val || null; } -
@cdellasanta said in Material Design Widgets: UniFi Netzwerk Status:
wes meinst mit Binds .. eventuell kenne ich es auch (noch) nicht .. bin auch relativ neu im ioBrokerDamit meine ich die Farbbinds von Scroungers genialem Werk
:
{mode:vis-materialdesign.0.colors.darkTheme;light:vis-materialdesign.0.colors.light.top_app_bar.menu_background;dark:vis-materialdesign.0.colors.dark.top_app_bar.menu_background; mode === "true" ? dark : light}
Das ist für den Hintergrund der topappbar z. B.ich begebe mich jetzt mal auf die Suche, ob man die device-Bilder irgendwie zuverlässig bei ui kriegt
//na hallöchen: https://www.ui.com/marketing/#unifi
Da muss ich mal an die Übersetzung ran.///: Das funktioniert jetzt mal für meine Geräte (außer u6lite, den gibts da nicht
)
Nicht schön, aber naja Wenn man das mal richtig macht, dann gehts für alle.const unifiControllerimagesPaths = {BZ2: 'uap/BZ2', BZ2LR: 'uap/BZ2', p2N: 'uap/p2N', U2HSR: 'uap/U2HSR', U2IW: 'uap/U2IW', U2L48: 'uap/BZ2', U2Lv2: 'uap/BZ2', U2M: 'uap/default', U2O: 'uap/U2O', U2S48: 'uap/BZ2', U2Sv2: 'uap/BZ2', U5O: 'uap/U2O', U7E: 'uap/U7E', U7EDU: 'uap/U7EDU', U7Ev2: 'uap/U7E', U7HD: 'uap/default', U7IW: 'uap/U7IW', U7IWP: 'uap/U7IW', U7LR: 'uap/default', U7LT: 'uap/default', U7MP: 'uap/U7O', U7MSH: 'uap/U7MSH', U7NHD: 'UniFi_AP/UAP-nanoHD/PNG/UAP-nanoHD', UAL6: 'UniFi_AP/UAP-AC-SHD/PNG/UAP-AC-SHD', U7O: 'uap/U7O', UFLHD: 'UniFi_AP/UAP-FlexHD/PNG/UAP-FlexHD', U7P: 'uap/default', U7PG2: 'uap/default', U7SHD: 'uap/default', UCMSH: 'uap/default', UCXG: 'uap/default', UHDIW: 'uap/U7IW', ULTE: 'uap/ULTE', UXSDM: 'uap/UXSDM', UXBSDM: 'uap/UXBSDM', UDMB: 'uap/UDMB', UP1: 'uap/UP1', UBB: 'ubb/UBB', UGW3: 'ugw/UGW3', UGW4: 'ugw/UGW4', UGWXG: 'ugw/UGWXG', S216150: 'usw/US16', S224250: 'usw/US24', S224500: 'usw/US24', S248500: 'usw/US48', S248750: 'usw/US48', S28150: 'usw/US8P150', UDC48X6: 'usw/UDC48X6', US16P150: 'UniFi_Switches/US-16-150W/PNG/US-16-150W', US24: 'usw/US24', US24P250: 'usw/US24', US24P500: 'usw/US24', US24PL2: 'usw/US24', US24PRO: 'usw/US24PRO', US24PRO2: 'usw/US24PRO2', US48: 'usw/US48', US48P500: 'usw/US48', US48P750: 'usw/US48', US48PL2: 'usw/US48', US48PRO: 'usw/US48PRO', US48PRO2: 'usw/US48PRO2', US6XG150: 'usw/US6XG150', US8: 'usw/US8', US8P150: 'usw/US8P150', US8P60: 'usw/US8P60', USC8: 'UniFi_Switches/US-8/PNG/US-8', USC8P450: 'usw/USC8P450', USF5P: 'usw/USF5P', USXG: 'usw/USXG', USL8LP: 'usw/USL8LP', USL16LP: 'usw/USL16LP', USL16P: 'usw/USL16P', USL24: 'usw/USL24', USL48: 'usw/USL48', USL24P: 'usw/USL24P', USL48P: 'usw/USL48P', USMINI: 'UniFi_Switches/USW-Flex-Mini/PNG/USW-Flex-Mini', USPRPS: 'usw/USPRPS', UAS: 'uas/UAS', UCK: 'uas/UCK', UCKG2: 'uas/UCKG2', UCKP: 'uas/UCKP', UMAD: 'ua/UMAD', UDM: 'udm/UDM', 'UDM-UAP': 'udm/UDM-UAP', 'UDM-USW': 'udm/UDM-USW', 'UDM-UGW': 'udm/UDM-UGW', UDMSE: 'udm/UDMSE', 'UDMSE-UAP': 'udm/UDM-UAP', 'UDMSE-USW': 'udm/UDM-USW', 'UDMSE-UGW': 'udm/UDM-UGW', UDMPRO: 'UniFi_DreamMachine/UDM-Pro/PNG/UDM-Pro', 'UDMPRO-USW': 'udm/UDMPRO-USW', 'UDMPRO-UGW': 'udm/UDMPRO-UGW'}; const unifiControllerimagesstyle = {UDMPRO: '_front-top-angle.png', U7NHD: '_Front_Angle.png', USMINI: '_Left-Angle.png'}; return 'https://dl.ubnt.com/press/UniFi/' + unifiControllerimagesPaths[deviceModel] + (unifiControllerimagesstyle[deviceModel] === undefined ? '_Top_Angle.png' : unifiControllerimagesstyle[deviceModel]); -
@cdellasanta
So, hab leider erst heute mal wieder Zeit zum Basteln. Vielen Dank für die ausführliche Antwort.
Werde mich da heute und morgen mal durchkämpfen und berichten, Danke!Gruß
joesilver -
@tobasium said in Material Design Widgets: UniFi Netzwerk Status:
Zusätzlich Frage ich mich woher die 0 in den dropdown menüs kommt?
Habs den Problem auch bei mir, nach den update der VIS adapter.
Es scheint dass es Akzeptiert nicht mehr meinen Übersetzungs-Object bindings wie z.B.:
{t:0_userdata.0.vis.unifiNetworkState.translations; t['Sort by'] || 'Sort by'}vis.js:2499 Error in eval[script]: var t = JSON.parse("{"Sort by":"Ordina per","Filter by":"Filtra per","Device":"Dispositivo"}");return t['Sort by'] || 'Sort by';Sollte eine valide input sein, Ich suche in Vis code was geändert würde .. ev. eröffne ich einen Bug ..
-
@cdellasanta also ich habe mich nochmal versucht. Ich habe dein aktuelles script aus dem git genommen.
Leider keine Veränderung: Zeile 39
const devicesView = false
Error: bezieht sich glaub auf Zeile 108
javascript.0 (1982) script.js.Smarthome_Tobi.System.Unifi-Netzwerk: TypeScript compilation failed: setState(devicesView.currentViewState, devicesView.devicesViewKey); ^ ERROR: Property 'currentViewState' does not exist on type 'never'. setState(devicesView.currentViewState, devicesView.devicesViewKey); ^ ERROR: Property 'devicesViewKey' does not exist on type 'never'.Aber das von dir kann ich auch nicht lassen: habe ja die states currentView und widgetViews nicht
const devicesView = {currentViewState: '0_userdata.0.vis.currentView', devicesViewKey: JSON.parse(getState('0_userdata.0.vis.widgetViews').val).indexOf('8_Devices')};
23:23:43.541 warn javascript.0 (1982) at script.js.Smarthome_Tobi.System.Unifi-Netzwerk:61:98 23:23:43.545 error javascript.0 (1982) script.js.Smarthome_Tobi.System.Unifi-Netzwerk: script.js.Smarthome_Tobi.System.Unifi-Netzwerk:61 23:23:43.546 error javascript.0 (1982) at script.js.Smarthome_Tobi.System.Unifi-Netzwerk:61:143Bin langsam echt gaga.
-
Entferne einfach die Zeilen dass du sicher nicht brauchst ..
... suchedevicesViewim Code und entferne die Zeilen/Paragraphen ... -
@cdellasanta Danke.
Habe es soweit mal angepasst. Jetzt läuft alles:
/** * Listings for UniFi devices (to use with Material Design Widgets) * * Requirements: * - UniFi controller permanently running on your network * - UniFi ioBroker adapter >= 0.5.8 (https://www.npmjs.com/package/iobroker.unifi) * - Library "moment" in the "Additional npm modules" of the javascript.0 adapter configuration * - Some programming skills * * @license http://www.opensource.org/licenses/mit-license.html MIT License * @author Scrounger <Scrounger@gmx.net> * @author web4wasch @WEB4WASCH * @author cdellasanta <70055566+cdellasanta@users.noreply.github.com> * @link https://forum.iobroker.net/topic/30875/material-design-widgets-unifi-netzwerk-status */ // Script configuration const statePrefix = '0_userdata.0.vis.NetzwerkDevicesStatus'; // Might be better to use an english statePrefix (e.g. '0_userdata.0.vis.unifiNetworkState'), but then remember to adapt the Views too const defaultLocale = 'de'; const lastDays = 7; // Show devices that have been seen in the network within the last X days const byteUnits = 'SI'; // SI units use the Metric representation based on 10^3 (1'000) as a order of magnitude // IEC units use 2^10 (1'024) as an order of magnitude const defaultSortMode = 'connected'; // Value for default and reset sort const sortResetAfter = 120; // Reset sort value after X seconds (0=disabled) const filterResetAfter = 120; // Reset filter after X seconds (0=disabled) const imagesPath = '/vis.0/main/Meine_Icons/Netzwerk/'; // Path for images // Optional: Path prefix for UniFi device images (see getUnifiImage function for deeper information on how to extract it for your network) // @todo Could take controller host and port from the unifi adapter configuration, but thene there is still the angular subdirectory that needs to be configured .. // const unifiImagesUrlPrefix = 'https://<your-controller-ip-or-host>:<controller-port>/manage/angular/g7989b19/images/devices/'; // const unifiImagesUrlPrefix = null; // Use the 'lan_noImage.png' for all devices const unifiImagesUrlPrefix = false; // Use '<device model>.png' from your imagesPath // Optional: display links into a separate view, instead of new navigation window (set false to disable this feature) const devicesView = false; const offlineTextSize = 14; const infoIconSize = 20; const infoTextSize = 14; const performances = { none: { color: 'grey', experience: 'speedometer', speedLan: 'network-off', speedWifi: 'wifi-off' }, good: { color: 'green', experience: 'speedometer', speedLan: 'network', speedWifi: 'signal-cellular-3' }, low: { color: '#ff9800', experience: 'speedometer-medium', speedLan: 'network', speedWifi: 'signal-cellular-2' }, bad: { color: 'FireBrick', experience: 'speedometer-slow', speedLan: 'network', speedWifi: 'signal-cellular-1' } }; // ********************************************************************************************************************************************************************** // Modules: should not need to 'import' them (ref: https://github.com/ioBroker/ioBroker.javascript/blob/c2725dcd9772627402d0e5bc74bf69b5ed6fe375/docs/en/javascript.md#require---load-some-module), // but to avoid TypeScript inspection errors, doing it anyway ... // import * as moment from "moment"; // Should work, but typescript raises exception ... const moment = require('moment'); // Initialization create/delete states, register listeners // Using my global functions (see global script common-states-handling ) /** For this script to work as standalone, the following 4 functions have been inlined at the end of script, * if you place them in a global script, then you need to uncomment following "declare" statements **/ // declare function runAfterInitialization(callback: CallableFunction): void; // declare function initializeState(stateId: string, defaultValue: any, common: object, listenerChangeType?: string, listenerCallback?: CallableFunction): void; // declare function getStateIfExists(stateId: string): any; // declare function getStateValue(stateId: string): any; const getLocale = () => getStateValue('0_userdata.0.vis.locale') || defaultLocale; initializeState(`${statePrefix}.jsonList`, '[]', {name: 'UniFi devices listing: jsonList', type: 'string'}); // Change on sort mode triggers list generation and reset of sort-timer-reset initializeState(`${statePrefix}.sortMode`, defaultSortMode, {name: 'UniFi device listing: sortMode', type: 'string'}, 'any', () => { updateDeviceLists(); resetSortTimer(); }); // Change on filter mode triggers list generation and reset of filter-timer-reset initializeState(`${statePrefix}.filterMode`, '', {name: 'UniFi device listing: filterMode', type: 'string'}, 'any', () => { updateDeviceLists(); resetFilterTimer(); }); // Sorters, filters and some additional translations are saved in states to permit texts localization initializeState(`${statePrefix}.sortersJsonList`, '{}', {name: 'UniFi device listing: sortersJsonList', type: 'string', read: true, write: false}); initializeState(`${statePrefix}.filtersJsonList`, '{}', {name: 'UniFi device listing: filtersJsonList', type: 'string', read: true, write: false}); initializeState(`${statePrefix}.translations`, '{}', {name: 'UniFi device listing: viewTranslations', type: 'string', read: true, write: false}); // On locale change, setup correct listings if (existsState('0_userdata.0.vis.locale')) { runAfterInitialization(() => on('0_userdata.0.vis.locale', 'ne', setup)); } runAfterInitialization(() => { setup(); // Refresh lists every time the unifi adapter has updated its data on('unifi.0.info.connection','any', updateDeviceLists); }); function setup(): void { setTimeLocale(); setSortItems(); setFilterItems(); setViewTranslations(); // Fill lists updateDeviceLists(); } function updateDeviceLists() { const getNote = (idDevice, name, mac, ip) => { try { return JSON.parse(getStateValue(`${idDevice}.note`) || '{}'); } catch (ex) { console.error(`${name} (ip: ${ip}, mac: ${mac}): ${ex.message}`); } return {}; } try { // Selector help: https://github.com/ioBroker/ioBroker.javascript/blob/master/docs/en/javascript.md#---selector let devices = $('state[id=unifi\.0\.default\.*\.*\.mac]'); // Query every time function is called (for new devices) let deviceList = []; for (var i = 0; i <= devices.length - 1; i++) { let [,,, deviceType, mac] = devices[i].split('.'); // Only 'clients' and 'devices' are allowed (not 'alerts' ... can't exclude direclty on selector ...) if (!['clients', 'devices'].includes(deviceType)) { continue; } let idDevice = devices[i].replace('.mac', ''); let unifiDevice = deviceType === 'devices'; let isWired = getStateValue(`${idDevice}.is_wired`) || unifiDevice; let lastSeen = new Date(getStateValue(`${idDevice}.last_seen`)); // For clients, if lastSeen difference is bigger than lastDays, then skip the device if (!unifiDevice && (new Date().getTime() - lastSeen.getTime()) > lastDays * 86400 * 1000) { continue; } // Values for all device types and connection let isConnected = getStateValue(`${idDevice}.is_online`) || unifiDevice; let ip = getStateValue(`${idDevice}.ip`) || ''; let name = getStateValue(`${idDevice}.name`) || getStateValue(`${idDevice}.hostname`) || ip || mac; let isGuest = getStateValue(`${idDevice}.is_guest`); let note = getNote(idDevice, name, mac, ip); let received = getStateValue(`${idDevice}.${unifiDevice || !isWired ? '' : 'wired-'}tx_bytes`) || 0; let sent = getStateValue(`${idDevice}.${unifiDevice || !isWired ? '' : 'wired-'}rx_bytes`) || 0; let uptime = getStateValue(`${idDevice}.uptime`); let experience = getStateValue(`${idDevice}.satisfaction`) || (isConnected ? 100 : 0); // For LAN devices I got null as expirience .. file a bug? let additionalInfoItems = ''; const infoItem = (icon, color, text) => `<span style="margin: 0 2px"> <span class="mdi mdi-${icon}" style="color: ${color}; font-size: ${infoIconSize}px; "></span> <span style="color: grey; font-family: RobotoCondensed-LightItalic; font-size: ${infoTextSize}px; margin-left: 2px;">${text}</span> </span>`; if (unifiDevice) { let cpu = getStateValue(`${idDevice}.system-stats.cpu`) || 0; let mem = getStateValue(`${idDevice}.system-stats.mem`) || 0; let cpuPerformance = !isConnected ? 'none' : (cpu <= 70 ? 'good' : (cpu <= 90 ? 'low' : 'bad')); let memPerformance = !isConnected ? 'none' : (mem <= 70 ? 'good' : (mem <= 90 ? 'low' : 'bad')); // The icons do not really fit, there is no good option for a "ram memory bank" in https://materialdesignicons.com/ additionalInfoItems += infoItem(/*'cpu-64-bit'*/ 'memory', performances[cpuPerformance].color, `${cpu}%`); additionalInfoItems += infoItem(/*'memory' 'expansion-card-variant'*/ 'sd', performances[memPerformance].color, `${mem}%`); } else { let experiencePerformance = !isConnected ? 'none' : (experience >= 70 ? 'good' : (experience >= 40 ? 'low' : 'bad')); let speedText = ''; let speedPerformance = 'none'; if (isWired) { // If exists prefer uptime on switch port uptime = getStateValue(`${idDevice}.uptime_by_usw`) || uptime; let switchMac = getStateValue(`${idDevice}.sw_mac`) || false; let switchPort = getStateValue(`${idDevice}.sw_port`) || false; if (switchMac && switchPort) { let speed = getStateValue(`unifi.0.default.devices.${switchMac}.port_table.port_${switchPort}.speed`) || 0; speedText = speed === 0 ? '' : (speed < 1000 ? (speed + ' Mbit/s') : (speed/1000 + ' Gbit/s')); speedPerformance = !isConnected ? 'none' : (speed == 1000 ? 'good' : 'low'); } // Do not consider fiber ports if (switchPort > 24) { // @todo On some switches the fiber port is already on port 9 .. there are surely better ways to recognise a fiber port // @todo This is legacy code, why are devices connected to fiber ports not of interest? continue; // Skip device } } else { let channel = getStateValue(`${idDevice}.channel`); let signal = getStateValue(`${idDevice}.signal`); speedText = channel === null ? '' : (channel > 13 ? '5G' : '2G'); speedPerformance = !isConnected ? 'none' : (signal >= -55 ? 'good' : (signal >= -70 ? 'low' : 'bad')); } additionalInfoItems += infoItem(performances[speedPerformance][isWired ? 'speedLan' : 'speedWifi'], performances[speedPerformance].color, speedText); additionalInfoItems += infoItem(performances[experiencePerformance].experience, performances[experiencePerformance].color, `${experience}%`); } deviceList.push({ // Visualization data (tplVis-materialdesign-Icon-List) statusBarColor: isConnected ? 'green' : 'FireBrick', text: isGuest ? `<span class="mdi mdi-account-box" style="color: #ff9800;">${name}</span>` : name, subText: ` ${ip} <div style="display: flex; flex-direction: row; padding-left: 8px; padding-right: 8px; align-items: center; justify-content: center;"> <span style="color: grey; font-size: ${offlineTextSize}px; line-height: 1.3; font-family: RobotoCondensed-LightItalic;"> ${translate(isConnected ? 'online' : 'offline')} ${(isConnected ? moment().subtract(uptime, 's') : moment(lastSeen)).fromNow()} </span> </div> <div style="display: flex; flex-direction: row; padding-left: 4px; padding-right: 4px; margin-top: 10px; align-items: center;"> <div style="display: flex; flex: 1; text-align: left; align-items: center; position: relative;"> ${infoItem('arrow-down', '#44739e', formatBytes(received, byteUnits))} ${infoItem('arrow-up', '#44739e', formatBytes(sent, byteUnits))} </div> <div style="display: flex; margin-left: 8px; align-items: center;"> ${additionalInfoItems} </div> </div> `, listType: !note.link ? 'text' : 'buttonLink', buttonLink: !note.link ? '' : (['http', 'https'].includes(note.link) ? `${note.link}://${ip}` : note.link), image: unifiDevice ? getUnifiImage(getStateValue(`${idDevice}.model`)) : (imagesPath + (note.image ? note.image : ((isWired ? 'lan' : 'wlan') + '_noImage')) + '.png'), icon: note.icon || '', // Additional data used for list sorting name: name, ip: ip, connected: isConnected, received: received, sent: sent, experience: experience, uptime: uptime, isWired: isWired, isUnifi: unifiDevice }); } // Sorting let sortMode = getStateValue(`${statePrefix}.sortMode`); deviceList.sort((a, b) => { switch (sortMode) { case 'ip': const na = Number(a['ip'].split(".").map(v => `000${v}`.slice(-3)).join('')); const nb = Number(b['ip'].split(".").map(v => `000${v}`.slice(-3)).join('')); return na - nb; case 'connected': case 'received': case 'sent': case 'experience': case 'uptime': return a[sortMode] === b[sortMode] ? 0 : +(a[sortMode] < b[sortMode]) || -1; case 'name': default: return a['name'].localeCompare(b['name'], getLocale(), {sensitivity: 'base'}); } }); if (devicesView) { // Create links list (before filtering) let linkList = []; deviceList.forEach(obj => { if (obj.listType === 'buttonLink') { linkList.push({ // Visualization data (tplVis-materialdesign-Select) text: obj.name, value: obj.buttonLink, icon: obj.icon /** @todo Add some properties (connected, ip, received, sent, experience, ...)? */ }); // Change behaviour from 'buttonLink' to 'buttonState', // a listener on the state change of the objectId will trigger the jump to the devices view obj['listType'] = 'buttonState'; obj['objectId'] = `${statePrefix}.selectedUrl`; obj['showValueLabel'] = false; obj['buttonStateValue'] = obj.buttonLink; delete obj['buttonLink']; } }); let linkListString = JSON.stringify(linkList); if (getStateValue(`${statePrefix}.linksJsonList`) !== linkListString) { setState(`${statePrefix}.linksJsonList`, linkListString, true); } } // Filtering let filterMode = getStateValue(`${statePrefix}.filterMode`) || ''; if (filterMode && filterMode !== '') { deviceList = deviceList.filter(item => { switch (filterMode) { case 'connected': return item.connected; case 'disconnected': return !item.connected; case 'lan': return item.isWired; case 'wlan': return !item.isWired; case 'unifi': return item.isUnifi; default: return false; // Unknown filter, return no item } }); } let result = JSON.stringify(deviceList); if (getStateValue(`${statePrefix}.jsonList`) !== result) { setState(`${statePrefix}.jsonList`, result, true); } } catch (err) { console.error(`[updateDeviceLists] error: ${err.message}`); console.error(`[updateDeviceLists] stack: ${err.stack}`); } log(`Updated lists`, 'debug'); } let sortTimeoutID; function resetSortTimer() { if (sortResetAfter > 0) { clearTimeout(sortTimeoutID); // If set then clear previous timer sortTimeoutID = setTimeout(() => setState(`${statePrefix}.sortMode`, defaultSortMode), sortResetAfter * 1000); } } let filterTimeoutID; function resetFilterTimer() { if (filterResetAfter > 0) { clearTimeout(filterTimeoutID); // If set then clear previous timer filterTimeoutID = setTimeout(() => setState(`${statePrefix}.filterMode`, ''), filterResetAfter * 1000); } } function setTimeLocale(): void { let locale = getLocale(); moment.locale(locale); moment.updateLocale(locale, { relativeTime: { future: translate('in %s'), past: translate('since %s'), // Default for past is '%s ago' s: translate('a few seconds'), ss: translate('%d seconds'), m: translate('a minute'), mm: translate('%d minutes'), h: translate('an hour'), hh: translate('%d hours'), d: translate('a day'), dd: translate('%d days'), w: translate('a week'), ww: translate('%d weeks'), M: translate('a month'), MM: translate('%d months'), y: translate('a year'), yy: translate('%d years') } }); } function setSortItems(): void { setState( `${statePrefix}.sortersJsonList`, JSON.stringify([ { text: translate('Name'), value: 'name', icon: 'sort-alphabetical-variant' }, { text: translate('IP address'), value: 'ip', icon: 'information-variant' }, { text: translate('Connected'), value: 'connected', icon: 'check-network' }, { text: translate('Received data'), value: 'received', icon: 'arrow-down' }, { text: translate('Sent data'), value: 'sent', icon: 'arrow-up' }, { text: translate('Experience'), value: 'experience', icon: 'speedometer' }, { text: translate('Uptime'), value: 'uptime', icon: 'clock-check-outline' } ]), true ); } function setFilterItems(): void { setState( `${statePrefix}.filtersJsonList`, JSON.stringify([ { text: translate('connected'), value: 'connected', icon: 'check-network' }, { text: translate('disconnected'), value: 'disconnected', icon: 'network-off' }, { text: translate('LAN connection'), value: 'lan', icon: 'network' }, { text: translate('WLAN connection'), value: 'wlan', icon: 'wifi' }, { text: translate('UniFi network devices'), value: 'unifi', icon: 'router-network' } ]), true ); } function setViewTranslations(): void { setState( `${statePrefix}.translations`, JSON.stringify([ 'Sort by', 'Filter by', 'Device' ].reduce((o, key) => ({...o, [key]: translate(key)}), {})), true ); } function translate(enText) { const map = { // For translations used https://translator.iobroker.in (that uses Google translator) // Sort items 'Name': {de: 'Name', ru: 'имя', pt: 'Nome', nl: 'Naam', fr: 'Nom', it: 'Nome', es: 'Nombre', pl: 'Nazwa','zh-cn': '名称'}, 'IP address': {de: 'IP Adresse', ru: 'Aйпи адрес', pt: 'Endereço de IP', nl: 'IP adres', fr: 'Adresse IP', it: 'Indirizzo IP', es: 'Dirección IP', pl: 'Adres IP','zh-cn': 'IP地址'}, 'Connected': {de: 'Verbunden', ru: 'Связано', pt: 'Conectado', nl: 'Verbonden', fr: 'Connecté', it: 'Collegato', es: 'Conectado', pl: 'Połączony','zh-cn': '连接的'}, 'Received data': {de: 'Daten empfangen', ru: 'Полученные данные', pt: 'Dados recebidos', nl: 'Ontvangen data', fr: 'Données reçues', it: 'Dati ricevuti', es: 'Datos recibidos', pl: 'Otrzymane dane','zh-cn': '收到资料'}, 'Sent data': {de: 'Daten gesendet', ru: 'Отправленные данные', pt: 'Dados enviados', nl: 'Verzonden gegevens', fr: 'Données envoyées', it: 'Dati inviati', es: 'Datos enviados', pl: 'Wysłane dane','zh-cn': '发送数据'}, 'Experience': {de: 'Erlebnis', ru: 'Опыт', pt: 'Experiência', nl: 'Ervaring', fr: 'Expérience', it: 'Esperienza', es: 'Experiencia', pl: 'Doświadczenie','zh-cn': '经验'}, 'Uptime': {de: 'Betriebszeit', ru: 'Время безотказной работы', pt: 'Tempo de atividade', nl: 'Uptime', fr: 'Disponibilité', it: 'Disponibilità', es: 'Tiempo de actividad', pl: 'Dostępność','zh-cn': '正常运行时间'}, // Filter Items 'connected': {de: 'verbunden', ru: 'связано', pt: 'conectado', nl: 'verbonden', fr: 'connecté', it: 'collegato', es: 'conectado', pl: 'połączony','zh-cn': '连接的'}, 'disconnected': {de: 'nicht verbunden', ru: 'отключен', pt: 'desconectado', nl: 'losgekoppeld', fr: 'débranché', it: 'disconnesso', es: 'desconectado', pl: 'niepowiązany','zh-cn': '断开连接'}, 'LAN connection': {de: 'LAN Verbindungen', ru: 'подключение по локальной сети', pt: 'conexão LAN', nl: 'LAN-verbinding', fr: 'connexion LAN', it: 'connessione LAN', es: 'coneccion LAN', pl: 'połączenie LAN','zh-cn': '局域网连接'}, 'WLAN connection': {de: 'WLAN Verbindungen', ru: 'поединение WLAN', pt: 'conexão WLAN', nl: 'WLAN-verbinding', fr: 'connexion WLAN', it: 'connessione WLAN', es: 'conexión WLAN', pl: 'połączenie WLAN','zh-cn': 'WLAN连接'}, 'UniFi network devices': {de: 'UniFi-Netzwerkgeräte', ru: 'Сетевые устройства UniFi', pt: 'Dispositivos de rede UniFi', nl: 'UniFi-netwerkapparaten', fr: 'Périphériques réseau UniFi', it: 'Dispositivi di rete UniFi', es: 'Dispositivos de red UniFi', pl: 'Urządzenia sieciowe UniFi', 'zh-cn': 'UniFi网络设备'}, // Additional view translations 'Sort by': {de: 'Sortieren nach', ru: 'Сортировать по', pt: 'Ordenar por', nl: 'Sorteer op', fr: 'Trier par', it: 'Ordina per', es: 'Ordenar por', pl: 'Sortuj według', 'zh-cn': '排序方式'}, 'Filter by': {de: 'Filtern nach', ru: 'Сортировать по', pt: 'Filtrar por', nl: 'Filteren op', fr: 'Filtrer par', it: 'Filtra per', es: 'Filtrado por', pl: 'Filtruj według','zh-cn': '过滤'}, 'Device': {de: 'Gerät', ru: 'Устройство', pt: 'Dispositivo', nl: 'Apparaat', fr: 'Dispositif', it: 'Dispositivo', es: 'Dispositivo', pl: 'Urządzenie','zh-cn': '设备'}, // On/off times 'online': {de: 'online', ru: 'онлайн', pt: 'conectados', nl: 'online', fr: 'en ligne', it: 'in linea', es: 'en línea', pl: 'online', 'zh-cn': "线上"}, 'offline': {de: 'offline', ru: 'не в сети', pt: 'desligada', nl: 'offline', fr: 'hors ligne', it: 'disconnesso', es: 'desconectado', pl: 'offline', 'zh-cn': "离线"}, // Relative times 'in %s': {de: 'in %s', ru: 'через %s', pt: 'em %s', nl: 'in %s', fr: 'en %s', it: 'in %s', es: 'en %s', pl: 'w %s','zh-cn': '在％s中'}, 'since %s': {de: 'seit %s', ru: 'поскольку %s', pt: 'desde %s', nl: 'sinds %s', fr: 'depuis %s', it: 'da %s', es: 'desde %s', pl: 'od %s','zh-cn': '自％s'}, 'a few seconds': {de: 'ein paar Sekunden', ru: 'несколько секунд', pt: 'alguns segundos', nl: 'een paar seconden', fr: 'quelques secondes', it: 'pochi secondi', es: 'unos pocos segundos', pl: 'kilka sekund','zh-cn': '几秒钟'}, '%d seconds': {de: '%d Sekunden', ru: '%d секунд', pt: '%d segundos', nl: '%d seconden', fr: '%d secondes', it: '%d secondi', es: '%d segundos', pl: '%d sekund','zh-cn': '％d秒'}, 'a minute': {de: 'eine Minute', ru: 'минута', pt: 'um minuto', nl: 'een minuut', fr: 'une minute', it: 'un minuto', es: 'un minuto', pl: 'minutę','zh-cn': '一分钟'}, '%d minutes': {de: '%d Minuten', ru: '%d минут', pt: '%d minutos', nl: '%d minuten', fr: '%d minutes', it: '%d minuti', es: '%d minutos', pl: '%d minut','zh-cn': '％d分钟'}, 'an hour': {de: 'eine Stunde', ru: 'час', pt: 'uma hora', nl: 'een uur', fr: 'une heure', it: 'un\'ora', es: 'una hora', pl: 'godzina','zh-cn': '一小时'}, '%d hours': {de: '%d Stunden', ru: '%d часов', pt: '%d horas', nl: '%d uur', fr: '%d heures', it: '%d ore', es: '%d horas', pl: '%d godzin','zh-cn': '％d小时'}, 'a day': {de: 'ein Tag', ru: 'день', pt: 'um dia', nl: 'een dag', fr: 'un jour', it: 'un giorno', es: 'un día', pl: 'dzień','zh-cn': '一天'}, '%d days': {de: '%d Tage', ru: '%d дней', pt: '%d dias', nl: '%d dagen', fr: '%d jours', it: '%d giorni', es: '%d días', pl: '%d dni','zh-cn': '％d天'}, 'a week': {de: 'eine Woche', ru: 'неделя', pt: 'uma semana', nl: 'een week', fr: 'une semaine', it: 'una settimana', es: 'una semana', pl: 'tydzień','zh-cn': '一周'}, '%d weeks': {de: '%d Wochen', ru: '%d недель', pt: '%d semanas', nl: '%d weken', fr: '%d semaines', it: '%d settimane', es: '%d semanas', pl: '%d tygodni','zh-cn': '％d周'}, 'a month': {de: 'ein Monat', ru: 'месяц', pt: 'um mês', nl: 'een maand', fr: 'un mois', it: 'un mese', es: 'un mes', pl: 'miesiąc','zh-cn': '一个月'}, '%d months': {de: '%d Monate', ru: '%d месяцев', pt: '%d meses', nl: '%d maanden', fr: '%d mois', it: '%d mesi', es: '%d meses', pl: '%d miesięcy','zh-cn': '％d个月'}, 'a year': {de: 'ein Jahr', ru: 'год', pt: 'um ano', nl: 'een jaar', fr: 'une année', it: 'un anno', es: 'un año', pl: 'rok','zh-cn': '一年'}, '%d years': {de: '%d Jahre', ru: '%d лет', pt: '%d anos', nl: '%d jaar', fr: '%d années', it: '%d anni', es: '%d años', pl: '%d lat','zh-cn': '％d年'} }; return (map[enText] || {})[getLocale()] || enText; } function formatBytes(bytes, unit?: 'SI' | 'IEC') : string { if (bytes === 0) return 'N/A'; const orderOfMagnitude = unit === 'SI' ? Math.pow(10, 3) : Math.pow(2, 10); const abbreviations = unit === 'SI' ? ['Bytes', 'kB', 'MB', 'GB', 'TB', 'PB', 'EB', 'ZB', 'YB'] : ['Bytes', 'KiB', 'MiB', 'GiB', 'TiB', 'PiB', 'EiB', 'ZiB', 'YiB']; const i = Math.floor(Math.log(bytes) / Math.log(orderOfMagnitude)); return parseFloat((bytes / Math.pow(orderOfMagnitude, i)).toFixed(3).substring(0, 4)) + ' ' + abbreviations[i]; } function getUnifiImage(deviceModel: string): string { // For unifi devices, there is no 'note' where an image information can be stored, but we have the // device 'model' that provides enough information for the choice of the correct image. // The images themselves are on your network, hosted by the UniFi controller for its devices grid view. // Example for my 3 device models (extract using developer console: see backround-image of element): // * US16P150: https://10.10.10.5:8443/manage/angular/g7989b19/images/devices/usw/US16/grid.png // * U7LT: https://10.10.10.5:8443/manage/angular/g7989b19/images/devices/uap/default/grid.png // * UGW3: https://10.10.10.5:8443/manage/angular/g7989b19/images/devices/ugw/UGW3/grid.png // From the divice model we need some insight to get to the image URL, this is provided by the app.css // of the Unifi Controller (I used mine with version 5.13.29) // Following list is obtained with some reverse engeeniring: downloaded minified app.css, reformatted code with Phpstorm, then regex-replace: "\.unifiDeviceIcon--([^.]+)\.is-grid[^{]+\{\s+background-image: url\("\.\./images/devices/([^"]+)grid\.png\"\)" with "deviceModel['$1'] = '$2';", ant then some additional parsing .. const unifiControllerimagesPaths = {BZ2: 'uap/BZ2', BZ2LR: 'uap/BZ2', p2N: 'uap/p2N', U2HSR: 'uap/U2HSR', U2IW: 'uap/U2IW', U2L48: 'uap/BZ2', U2Lv2: 'uap/BZ2', U2M: 'uap/default', U2O: 'uap/U2O', U2S48: 'uap/BZ2', U2Sv2: 'uap/BZ2', U5O: 'uap/U2O', U7E: 'uap/U7E', U7EDU: 'uap/U7EDU', U7Ev2: 'uap/U7E', U7HD: 'uap/default', U7IW: 'uap/U7IW', U7IWP: 'uap/U7IW', U7LR: 'uap/default', U7LT: 'uap/default', U7MP: 'uap/U7O', U7MSH: 'uap/U7MSH', U7NHD: 'uap/U7NHD', U7O: 'uap/U7O', UFLHD: 'uap/UFLHD', U7P: 'uap/default', U7PG2: 'uap/default', U7SHD: 'uap/default', UCMSH: 'uap/default', UCXG: 'uap/default', UHDIW: 'uap/U7IW', ULTE: 'uap/ULTE', UXSDM: 'uap/UXSDM', UXBSDM: 'uap/UXBSDM', UDMB: 'uap/UDMB', UP1: 'uap/UP1', UBB: 'ubb/UBB', UGW3: 'ugw/UGW3', UGW4: 'ugw/UGW4', UGWXG: 'ugw/UGWXG', S216150: 'usw/US16', S224250: 'usw/US24', S224500: 'usw/US24', S248500: 'usw/US48', S248750: 'usw/US48', S28150: 'usw/US8P150', UDC48X6: 'usw/UDC48X6', US16P150: 'usw/US16', US24: 'usw/US24', US24P250: 'usw/US24', US24P500: 'usw/US24', US24PL2: 'usw/US24', US24PRO: 'usw/US24PRO', US24PRO2: 'usw/US24PRO2', US48: 'usw/US48', US48P500: 'usw/US48', US48P750: 'usw/US48', US48PL2: 'usw/US48', US48PRO: 'usw/US48PRO', US48PRO2: 'usw/US48PRO2', US6XG150: 'usw/US6XG150', US8: 'usw/US8', US8P150: 'usw/US8P150', US8P60: 'usw/US8P60', USC8: 'usw/US8', USC8P450: 'usw/USC8P450', USF5P: 'usw/USF5P', USXG: 'usw/USXG', USL8LP: 'usw/USL8LP', USL16LP: 'usw/USL16LP', USL16P: 'usw/USL16P', USL24: 'usw/USL24', USL48: 'usw/USL48', USL24P: 'usw/USL24P', USL48P: 'usw/USL48P', USMINI: 'usw/USMINI', USPRPS: 'usw/USPRPS', UAS: 'uas/UAS', UCK: 'uas/UCK', UCKG2: 'uas/UCKG2', UCKP: 'uas/UCKP', UMAD: 'ua/UMAD', UDM: 'udm/UDM', 'UDM-UAP': 'udm/UDM-UAP', 'UDM-USW': 'udm/UDM-USW', 'UDM-UGW': 'udm/UDM-UGW', UDMSE: 'udm/UDMSE', 'UDMSE-UAP': 'udm/UDM-UAP', 'UDMSE-USW': 'udm/UDM-USW', 'UDMSE-UGW': 'udm/UDM-UGW', UDMPRO: 'udm/UDMPRO', 'UDMPRO-USW': 'udm/UDMPRO-USW', 'UDMPRO-UGW': 'udm/UDMPRO-UGW'}; // If prefix set to null return the 'lan_noImage.png' for all devices, if set to false return '<device model>.png' if (!unifiImagesUrlPrefix) { return imagesPath + (unifiImagesUrlPrefix === null ? 'lan_noImage' : deviceModel) + '.png'; } return unifiImagesUrlPrefix + unifiControllerimagesPaths[deviceModel] + '/grid.png'; } /** Global functions ********************************************************************************/ // My global functions for state and listener initialization // see doc https://github.com/ioBroker/ioBroker.javascript/blob/master/docs/en/javascript.md#global-functions const resetStatesOnReload = false; // Enable only when actively developing let statesInitializing = 0; // Semaphore for runAfterInitialization, handled by initializeState // Helper function for states setup function runAfterInitialization(callback) { log(`States initializing: ${statesInitializing}`, 'silly'); if (statesInitializing <= 0) { callback(); return; } // Important: use timout instead of wait! setTimeout(() => runAfterInitialization(callback), 100); } function initializeState(stateId, defaultValue, common, listenerChangeType?: string, listenerCallback?: CallableFunction) { const registerListener = () => { if (listenerChangeType) { // Register listener only after all states are initialized runAfterInitialization(() => { on(stateId, listenerChangeType, listenerCallback); log(`Registered listener on ${stateId}`, 'debug'); }); } }; const myCreateState = () => { statesInitializing++; log(`myCreateState: increased states initializing: ${statesInitializing}`, 'silly'); createState(stateId, defaultValue , common, () => { log(`Created state ${stateId}`, 'debug'); registerListener(); statesInitializing--; log(`myCreateState: reduced states initializing: ${statesInitializing}`, 'silly'); }); }; const resetState = () => { statesInitializing++; log(`resetState: increased states initializing: ${statesInitializing}`, 'silly'); deleteState(stateId, () => { log(`Deleted state ${stateId}`, 'debug'); myCreateState(); statesInitializing--; log(`resetState: reduced states initializing: ${statesInitializing}`, 'silly'); }); } if (!existsState(stateId)) { myCreateState(); } else if (resetStatesOnReload) { resetState(); } else { registerListener(); } } function getStateIfExists(stateId) { // Avoid warning when state does not exists if (!existsState(stateId)) { return null; } return getState(stateId); } function getStateValue(stateId) { return (getStateIfExists(stateId) || {}).val || null; } -
Hallo,
habe mir das Skript gerade installier, läuft soweit auch super, bis auf die u. g. Meldungen:
javascript.0 2021-02-26 07:46:00.130 error (18767) script.js.Olli.Unifi_Netzwerk: Keller Flur Regal (ip: 192.168.178.34, mac: unifi.0.default.clients.e4:ff:a1:13:a7:de): Unexpected token S in JSON at position 0 javascript.0 2021-02-26 07:46:00.129 error (18767) script.js.Olli.Unifi_Netzwerk: Echo Dot 1 (ip: 192.168.178.63, mac: unifi.0.default.clients.f4:02:2b:d1:37:7c): Unexpected end of JSON input javascript.0 2021-02-26 07:46:00.127 error (18767) script.js.Olli.Unifi_Netzwerk: Echo Dot 2 (ip: 192.168.178.32, mac: unifi.0.default.clients.fe:f0:a4:c4:d2:01): Unexpected end of JSON input javascript.0 2021-02-26 07:46:00.125 error (18767) script.js.Olli.Unifi_Netzwerk: Xiaomi 1 (ip: 192.168.178.26, mac: unifi.0.default.clients.ec:de:6f:c5:b2:ed): Unexpected end of JSON input javascript.0 2021-02-26 07:46:00.124 error (18767) script.js.Olli.Unifi_Netzwerk: EG Wohnzimmer Sonos (ip: 192.168.178.68, mac: unifi.0.default.clients.ee:77:03:c2:43:1a): Unexpected token S in JSON at position 0 javascript.0 2021-02-26 07:46:00.123 error (18767) script.js.Olli.Unifi_Netzwerk: Sonoff P1_2 (ip: 192.168.178.66, mac: unifi.0.default.clients.e5:9e:01:c4:2a:25): Unexpected token S in JSON at position 0 javascript.0 2021-02-26 07:46:00.122 error (18767) script.js.Olli.Unifi_Netzwerk: Sonoff P1_1 (ip: 192.168.178.39, mac: unifi.0.default.clients.f0:98:0e:f4:e3:62): Unexpected token S in JSON at position 0 javascript.0 2021-02-26 07:46:00.121 error (18767) script.js.Olli.Unifi_Netzwerk: Echo Dot 3 (ip: 192.168.178.71, mac: unifi.0.default.clients.dc:9b:bf:66:e4:7a): Unexpected end of JSON input javascript.0 2021-02-26 07:46:00.118 error (18767) script.js.Olli.Unifi_Netzwerk: Kühltruhe (ip: 192.168.178.30, mac: unifi.0.default.clients.dd:e1:2b:e5:ec:7c): Unexpected token S in JSON at position 0Woran könnte das liegen?
-
@scrounger evtl. hast du nen schnellen Tipp. Skript angelegt als JS, Datenpunkte wurden vom Script angelegt - View "List" importiert, leider ist die Liste der Geräte leer?
Und was hat es mit der View "Devices" auf sich - da bekomme ich den Fehler "selected URL not found" - was sollte man da angeben?
Gruß Peter -
Hi,
da es schon eine weile her ist, nochmal die Frage ob Du vlt. eine Idee hast, woran es liegen könnte?
-
Hallo,
bei mir klappt es soweit mit der View.
Das mit den Bildern habe ich nicht verstanden; sind aber aktuell auch nicht wichtig. Wenn man das direkt vom controller übernehmen könnte, wäre das natürlich spitze, denn hier sind die Bilder hinterlegt.
Ich bekomme jedoch folgenden Fehler ausgespuckt:
16:29:00.092 error javascript.0 (8648) script.js.common.Netzwerk.Unifi-Clients: DLAN Adapter (ip: 192.168.188.27, mac: unifi.0.default.clients.00:1a:22:07:e1:84): Unexpected end of JSON input 16:29:00.092 error javascript.0 (8648) script.js.common.Netzwerk.Unifi-Clients: Yamaha RX-V773 (ip: 192.168.188.11, mac: unifi.0.default.clients.00:a0:de:93:d3:0d): Unexpected end of JSON input 16:29:00.094 error javascript.0 (8648) script.js.common.Netzwerk.Unifi-Clients: Show 5 Studio (ip: 192.168.188.18, mac: unifi.0.default.clients.1c:4d:66:d8:fa:3a): Unexpected end of JSON input 16:29:00.094 error javascript.0 (8648) script.js.common.Netzwerk.Unifi-Clients: Sonos Beam (ip: 192.168.188.72, mac: unifi.0.default.clients.34:7e:5c:82:73:36): Unexpected end of JSON input 16:29:00.097 error javascript.0 (8648) script.js.common.Netzwerk.Unifi-Clients: Shelly Studio Licht (ip: 192.168.188.70, mac: unifi.0.default.clients.84:f3:eb:32:c8:58): Unexpected end of JSON input 16:29:00.098 error javascript.0 (8648) script.js.common.Netzwerk.Unifi-Clients: Tedee (ip: 192.168.188.24, mac: unifi.0.default.clients.90:e2:02:8b:11:46): Unexpected end of JSON input 16:29:00.100 error javascript.0 (8648) script.js.common.Netzwerk.Unifi-Clients: IoBroker (ip: 192.168.188.120, mac: unifi.0.default.clients.f8:63:3f:0c:61:ba): Unexpected end of JSON input@Scrounger Kannst du mir sagen, was muss ich tun, um das Problem zu lösen?
Vielen Dank!!
