Skip to content
  • Home
  • Aktuell
  • Tags
  • 0 Ungelesen 0
  • Kategorien
  • Unreplied
  • Beliebt
  • GitHub
  • Docu
  • Hilfe
Skins
  • Light
  • Brite
  • Cerulean
  • Cosmo
  • Flatly
  • Journal
  • Litera
  • Lumen
  • Lux
  • Materia
  • Minty
  • Morph
  • Pulse
  • Sandstone
  • Simplex
  • Sketchy
  • Spacelab
  • United
  • Yeti
  • Zephyr
  • Dark
  • Cyborg
  • Darkly
  • Quartz
  • Slate
  • Solar
  • Superhero
  • Vapor

  • Standard: (Kein Skin)
  • Kein Skin
Einklappen
ioBroker Logo

Community Forum

donate donate
  1. ioBroker Community Home
  2. Deutsch
  3. Hardware
  4. RPI4 Updaten auf aktuellen Status?

NEWS

  • Jahresrückblick 2025 – unser neuer Blogbeitrag ist online! ✨
    BluefoxB
    Bluefox
    17
    1
    4.0k

  • Neuer Blogbeitrag: Monatsrückblick - Dezember 2025 🎄
    BluefoxB
    Bluefox
    13
    1
    1.2k

  • Weihnachtsangebot 2025! 🎄
    BluefoxB
    Bluefox
    25
    1
    2.5k

RPI4 Updaten auf aktuellen Status?

Geplant Angeheftet Gesperrt Verschoben Hardware
rpi4 update raspi os
38 Beiträge 3 Kommentatoren 1.9k Aufrufe 3 Watching
  • Älteste zuerst
  • Neuste zuerst
  • Meiste Stimmen
Antworten
  • In einem neuen Thema antworten
Anmelden zum Antworten
Dieses Thema wurde gelöscht. Nur Nutzer mit entsprechenden Rechten können es sehen.
  • ? Ein ehemaliger Benutzer

    @Thomas-Braun said in RPI4 Updaten auf aktuellen Status?:

    @Pete0815 sagte in RPI4 Updaten auf aktuellen Status?:

    EEprom Update stream auf stable umstellen

    Was meinst du genau damit?

    Genau das :)

    Die Datei /etc/default/rpi-eeprom-update
    würde ich aber auf jedenfall mal prüfen. Die sollte eigentlich so aussehen:

    FIRMWARE_RELEASE_STATUS="critical"
    

    mußte dies für die beta Version umstellen und würde jetzt wieder zu stable oder critical umstellen wollen.

    Kannst Du etwas zu diesen 14 Dateien sagen, die ich damals auf dem Raspi OS Image ausgetauscht habe. Es hieß die wären für den USB boot "fehlerhaft" und habe sie durch eine andere Version ersetzt. Ging um diese hier:
    6e407702-5483-4ccd-9023-30cc5c98217c-grafik.png

    Danke

    Thomas BraunT Online
    Thomas BraunT Online
    Thomas Braun
    Most Active
    schrieb am zuletzt editiert von
    #4

    @Pete0815
    Dann mach das.
    Ich vermute aber, dass ein apt upgrade die Abweichung in der conf-Datei ohnehin bemerken würde und dich fragen würde, was damit geschehen soll.

    Linux-Werkzeugkasten:
    https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
    NodeJS Fixer Skript:
    https://forum.iobroker.net/topic/68035/iob-node-fix-skript
    iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

    1 Antwort Letzte Antwort
    0
    • ? Ein ehemaliger Benutzer

      @Thomas-Braun said in RPI4 Updaten auf aktuellen Status?:

      @Pete0815 sagte in RPI4 Updaten auf aktuellen Status?:

      EEprom Update stream auf stable umstellen

      Was meinst du genau damit?

      Genau das :)

      Die Datei /etc/default/rpi-eeprom-update
      würde ich aber auf jedenfall mal prüfen. Die sollte eigentlich so aussehen:

      FIRMWARE_RELEASE_STATUS="critical"
      

      mußte dies für die beta Version umstellen und würde jetzt wieder zu stable oder critical umstellen wollen.

      Kannst Du etwas zu diesen 14 Dateien sagen, die ich damals auf dem Raspi OS Image ausgetauscht habe. Es hieß die wären für den USB boot "fehlerhaft" und habe sie durch eine andere Version ersetzt. Ging um diese hier:
      6e407702-5483-4ccd-9023-30cc5c98217c-grafik.png

      Danke

      Thomas BraunT Online
      Thomas BraunT Online
      Thomas Braun
      Most Active
      schrieb am zuletzt editiert von Thomas Braun
      #5

      @Pete0815
      Die 14 Dateien kommen vom Bootloader und dürften auch via regulärem Update dann entsprechend angepasst werden.

      In meinen System ist z. B.

      ls -la /boot/start4.elf
      -rwxr-xr-x 1 root root 2225376 Okt 23 20:23 /boot/start4.elf
      

      vom 23. Oktober

      Linux-Werkzeugkasten:
      https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
      NodeJS Fixer Skript:
      https://forum.iobroker.net/topic/68035/iob-node-fix-skript
      iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

      ? 1 Antwort Letzte Antwort
      0
      • Thomas BraunT Thomas Braun

        @Pete0815
        Die 14 Dateien kommen vom Bootloader und dürften auch via regulärem Update dann entsprechend angepasst werden.

        In meinen System ist z. B.

        ls -la /boot/start4.elf
        -rwxr-xr-x 1 root root 2225376 Okt 23 20:23 /boot/start4.elf
        

        vom 23. Oktober

        ? Offline
        ? Offline
        Ein ehemaliger Benutzer
        schrieb am zuletzt editiert von
        #6

        @Thomas-Braun
        Danke

        Bin gerade etwas verwundert. Da mein EEprom Update stream auf critical stand.
        Prüfe ich nun:

        pi@IOBraspi:~ $ rpi-eeprom-update
        BCM2711 detected
        Dedicated VL805 EEPROM detected
        BOOTLOADER: up-to-date
        CURRENT: Mo 15. Jun 13:36:19 UTC 2020 (1592228179)
         LATEST: Do 16. Apr 17:11:26 UTC 2020 (1587057086)
         FW DIR: /lib/firmware/raspberrypi/bootloader/critical
        VL805: version unknown. Try sudo rpi-eeprom-update
        CURRENT:
         LATEST: 000137ad
        

        Findet er meiner Version vom 15.Juni nicht. ok, wenn sie im critical nicht vorhanden ist.

        Gucke ich aber jetzt im github steht dort bei critical eine Version vom 03.09.2020. Ist das nicht latest?
        15dae91b-9b01-4151-8b8e-3814bcad2227-grafik.png

        Thomas BraunT 1 Antwort Letzte Antwort
        0
        • ? Ein ehemaliger Benutzer

          @Thomas-Braun
          Danke

          Bin gerade etwas verwundert. Da mein EEprom Update stream auf critical stand.
          Prüfe ich nun:

          pi@IOBraspi:~ $ rpi-eeprom-update
          BCM2711 detected
          Dedicated VL805 EEPROM detected
          BOOTLOADER: up-to-date
          CURRENT: Mo 15. Jun 13:36:19 UTC 2020 (1592228179)
           LATEST: Do 16. Apr 17:11:26 UTC 2020 (1587057086)
           FW DIR: /lib/firmware/raspberrypi/bootloader/critical
          VL805: version unknown. Try sudo rpi-eeprom-update
          CURRENT:
           LATEST: 000137ad
          

          Findet er meiner Version vom 15.Juni nicht. ok, wenn sie im critical nicht vorhanden ist.

          Gucke ich aber jetzt im github steht dort bei critical eine Version vom 03.09.2020. Ist das nicht latest?
          15dae91b-9b01-4151-8b8e-3814bcad2227-grafik.png

          Thomas BraunT Online
          Thomas BraunT Online
          Thomas Braun
          Most Active
          schrieb am zuletzt editiert von
          #7

          @Pete0815
          Hast du denn schon mal ein

          sudo apt update
          

          durchgeführt?

          Linux-Werkzeugkasten:
          https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
          NodeJS Fixer Skript:
          https://forum.iobroker.net/topic/68035/iob-node-fix-skript
          iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

          ? 1 Antwort Letzte Antwort
          0
          • Thomas BraunT Thomas Braun

            @Pete0815
            Hast du denn schon mal ein

            sudo apt update
            

            durchgeführt?

            ? Offline
            ? Offline
            Ein ehemaliger Benutzer
            schrieb am zuletzt editiert von
            #8

            @Thomas-Braun
            Nein, wollte mir das System nicht "abschießen" und erst prüfen ob das so ok ist.

            Thomas BraunT 2 Antworten Letzte Antwort
            0
            • ? Ein ehemaliger Benutzer

              @Thomas-Braun
              Nein, wollte mir das System nicht "abschießen" und erst prüfen ob das so ok ist.

              Thomas BraunT Online
              Thomas BraunT Online
              Thomas Braun
              Most Active
              schrieb am zuletzt editiert von
              #9

              @Pete0815
              Mit

              sudo apt update
              

              passiert gar nix am System.

              Die Version vom 03.09.2020 ist jedenfalls die Standard-Version:

              vcgencmd bootloader_version
              Sep  3 2020 13:11:43
              version c305221a6d7e532693cc7ff57fddfc8649def167 (release)
              timestamp 1599135103
              

              Linux-Werkzeugkasten:
              https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
              NodeJS Fixer Skript:
              https://forum.iobroker.net/topic/68035/iob-node-fix-skript
              iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

              ? 1 Antwort Letzte Antwort
              0
              • ? Ein ehemaliger Benutzer

                @Thomas-Braun
                Nein, wollte mir das System nicht "abschießen" und erst prüfen ob das so ok ist.

                Thomas BraunT Online
                Thomas BraunT Online
                Thomas Braun
                Most Active
                schrieb am zuletzt editiert von
                #10

                @Pete0815
                Jetzt schau halt mal was passieren würde.
                Mit

                sudo apt update
                sudo apt-distupgrade --dry-run
                

                macht man das.

                Linux-Werkzeugkasten:
                https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                NodeJS Fixer Skript:
                https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                1 Antwort Letzte Antwort
                0
                • Thomas BraunT Thomas Braun

                  @Pete0815
                  Mit

                  sudo apt update
                  

                  passiert gar nix am System.

                  Die Version vom 03.09.2020 ist jedenfalls die Standard-Version:

                  vcgencmd bootloader_version
                  Sep  3 2020 13:11:43
                  version c305221a6d7e532693cc7ff57fddfc8649def167 (release)
                  timestamp 1599135103
                  
                  ? Offline
                  ? Offline
                  Ein ehemaliger Benutzer
                  schrieb am zuletzt editiert von
                  #11

                  @Thomas-Braun
                  Habe jetzt mal

                  sudo apt update
                  

                  ausgeführt und er sagt 53 updates verfügbar. Liste ausgeben mit

                  apt list --upgradable
                  

                  In dieser Liste taucht auch das EEprom auf allerdings ohne Versions oder Datumsangaben

                  Thomas BraunT 1 Antwort Letzte Antwort
                  0
                  • ? Ein ehemaliger Benutzer

                    @Thomas-Braun
                    Habe jetzt mal

                    sudo apt update
                    

                    ausgeführt und er sagt 53 updates verfügbar. Liste ausgeben mit

                    apt list --upgradable
                    

                    In dieser Liste taucht auch das EEprom auf allerdings ohne Versions oder Datumsangaben

                    Thomas BraunT Online
                    Thomas BraunT Online
                    Thomas Braun
                    Most Active
                    schrieb am zuletzt editiert von Thomas Braun
                    #12

                    @Pete0815
                    Sollte dann so ähnlich aussehen:

                    pi@raspberrypi:~ $ apt policy rpi-eeprom
                    rpi-eeprom:
                      Installiert:           10.2-1
                      Installationskandidat: 10.2-1
                      Versionstabelle:
                     *** 10.2-1 500
                            500 http://archive.raspberrypi.org/debian buster/main armhf Packages
                            100 /var/lib/dpkg/status
                    

                    Linux-Werkzeugkasten:
                    https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                    NodeJS Fixer Skript:
                    https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                    iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                    ? 1 Antwort Letzte Antwort
                    0
                    • Thomas BraunT Thomas Braun

                      @Pete0815
                      Sollte dann so ähnlich aussehen:

                      pi@raspberrypi:~ $ apt policy rpi-eeprom
                      rpi-eeprom:
                        Installiert:           10.2-1
                        Installationskandidat: 10.2-1
                        Versionstabelle:
                       *** 10.2-1 500
                              500 http://archive.raspberrypi.org/debian buster/main armhf Packages
                              100 /var/lib/dpkg/status
                      
                      ? Offline
                      ? Offline
                      Ein ehemaliger Benutzer
                      schrieb am zuletzt editiert von
                      #13

                      @Thomas-Braun
                      ah ok die 10.2 sehe ich und dann sollte ich das wohl durchführen:

                      pi@IOBraspi:~ $ sudo apt dist-upgrade --dry-run
                      Paketlisten werden gelesen... Fertig
                      Abhängigkeitsbaum wird aufgebaut.
                      Statusinformationen werden eingelesen.... Fertig
                      Paketaktualisierung (Upgrade) wird berechnet... Fertig
                      Das folgende Paket wurde automatisch installiert und wird nicht mehr benötigt:
                        rpi-eeprom-images
                      Verwenden Sie »sudo apt autoremove«, um es zu entfernen.
                      Die folgenden Pakete werden aktualisiert (Upgrade):
                        base-files bind9-host bluez bluez-firmware dbus firmware-atheros firmware-brcm80211 firmware-libertas firmware-misc-nonfree firmware-realtek libbind9-161
                        libdbi-perl libdbus-1-3 libdbus-1-dev libdns-export1104 libdns1104 libfreetype6 libfreetype6-dev libgnutls30 libisc-export1100 libisc1100 libisccc161
                        libisccfg163 libjson-c3 liblwres161 libmariadb3 libpython3.7 libpython3.7-minimal libpython3.7-stdlib libraspberrypi-bin libraspberrypi-dev
                        libraspberrypi-doc libraspberrypi0 libx11-6 libx11-data mariadb-client mariadb-client-10.3 mariadb-client-core-10.3 mariadb-common mariadb-server
                        mariadb-server-10.3 mariadb-server-core-10.3 nfs-common pi-bluetooth python3.7 python3.7-minimal raspberrypi-bootloader raspberrypi-kernel
                        raspberrypi-sys-mods raspi-config rpi-eeprom rpi-eeprom-images tzdata
                      53 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
                      Inst base-files [10.3+rpi1+deb10u4] (10.3+rpi1+deb10u6 Raspbian:stable [armhf])
                      Conf base-files (10.3+rpi1+deb10u6 Raspbian:stable [armhf])
                      Inst mariadb-common [1:10.3.22-0+deb10u1] (1:10.3.25-0+deb10u1 Raspbian:stable [all])
                      Inst libgnutls30 [3.6.7-4+deb10u4] (3.6.7-4+deb10u5 Raspbian:stable [armhf])
                      Conf libgnutls30 (3.6.7-4+deb10u5 Raspbian:stable [armhf])
                      Inst mariadb-server-core-10.3 [1:10.3.22-0+deb10u1] (1:10.3.25-0+deb10u1 Raspbian:stable [armhf])
                      Inst libdbi-perl [1.642-1+b1] (1.642-1+deb10u1 Raspbian:stable [armhf])
                      Inst mariadb-client-core-10.3 [1:10.3.22-0+deb10u1] (1:10.3.25-0+deb10u1 Raspbian:stable [armhf])
                      Inst mariadb-client-10.3 [1:10.3.22-0+deb10u1] (1:10.3.25-0+deb10u1 Raspbian:stable [armhf])
                      Conf mariadb-common (1:10.3.25-0+deb10u1 Raspbian:stable [all])
                      Inst mariadb-server-10.3 [1:10.3.22-0+deb10u1] (1:10.3.25-0+deb10u1 Raspbian:stable [armhf])
                      Inst libpython3.7 [3.7.3-2+deb10u1] (3.7.3-2+deb10u2 Raspbian:stable [armhf]) []
                      Inst python3.7 [3.7.3-2+deb10u1] (3.7.3-2+deb10u2 Raspbian:stable [armhf]) []
                      Inst libpython3.7-stdlib [3.7.3-2+deb10u1] (3.7.3-2+deb10u2 Raspbian:stable [armhf]) []
                      Inst python3.7-minimal [3.7.3-2+deb10u1] (3.7.3-2+deb10u2 Raspbian:stable [armhf]) []
                      Inst libpython3.7-minimal [3.7.3-2+deb10u1] (3.7.3-2+deb10u2 Raspbian:stable [armhf])
                      Inst tzdata [2020a-0+deb10u1] (2020d-0+deb10u1 Raspbian:stable [all])
                      Inst libjson-c3 [0.12.1+ds-2] (0.12.1+ds-2+deb10u1 Raspbian:stable [armhf])
                      Inst bind9-host [1:9.11.5.P4+dfsg-5.1+deb10u1] (1:9.11.5.P4+dfsg-5.1+deb10u2 Raspbian:stable [armhf]) []
                      Inst libbind9-161 [1:9.11.5.P4+dfsg-5.1+deb10u1] (1:9.11.5.P4+dfsg-5.1+deb10u2 Raspbian:stable [armhf]) []
                      Inst libisccfg163 [1:9.11.5.P4+dfsg-5.1+deb10u1] (1:9.11.5.P4+dfsg-5.1+deb10u2 Raspbian:stable [armhf]) []
                      Inst libisccc161 [1:9.11.5.P4+dfsg-5.1+deb10u1] (1:9.11.5.P4+dfsg-5.1+deb10u2 Raspbian:stable [armhf]) []
                      Inst libdns1104 [1:9.11.5.P4+dfsg-5.1+deb10u1] (1:9.11.5.P4+dfsg-5.1+deb10u2 Raspbian:stable [armhf]) []
                      Inst libisc1100 [1:9.11.5.P4+dfsg-5.1+deb10u1] (1:9.11.5.P4+dfsg-5.1+deb10u2 Raspbian:stable [armhf]) []
                      Inst liblwres161 [1:9.11.5.P4+dfsg-5.1+deb10u1] (1:9.11.5.P4+dfsg-5.1+deb10u2 Raspbian:stable [armhf])
                      Inst libdbus-1-dev [1.12.16-1] (1.12.20-0+deb10u1 Raspbian:stable [armhf]) []
                      Inst dbus [1.12.16-1] (1.12.20-0+deb10u1 Raspbian:stable [armhf]) []
                      Inst libdbus-1-3 [1.12.16-1] (1.12.20-0+deb10u1 Raspbian:stable [armhf])
                      Inst bluez [5.50-1.2~deb10u1+rpt1] (5.50-1.2~deb10u1+rpt2 Raspberry Pi Foundation:testing [armhf])
                      Inst bluez-firmware [1.2-4+rpt3] (1.2-4+rpt6 Raspberry Pi Foundation:testing [all])
                      Inst firmware-atheros [1:20190114-1+rpt7] (1:20190114-1+rpt9 Raspberry Pi Foundation:testing [all])
                      Inst firmware-brcm80211 [1:20190114-1+rpt7] (1:20190114-1+rpt9 Raspberry Pi Foundation:testing [all])
                      Inst firmware-libertas [1:20190114-1+rpt7] (1:20190114-1+rpt9 Raspberry Pi Foundation:testing [all])
                      Inst firmware-misc-nonfree [1:20190114-1+rpt7] (1:20190114-1+rpt9 Raspberry Pi Foundation:testing [all])
                      Inst firmware-realtek [1:20190114-1+rpt7] (1:20190114-1+rpt9 Raspberry Pi Foundation:testing [all])
                      Inst libisc-export1100 [1:9.11.5.P4+dfsg-5.1+deb10u1] (1:9.11.5.P4+dfsg-5.1+deb10u2 Raspbian:stable [armhf])
                      Inst libdns-export1104 [1:9.11.5.P4+dfsg-5.1+deb10u1] (1:9.11.5.P4+dfsg-5.1+deb10u2 Raspbian:stable [armhf])
                      Inst libfreetype6-dev [2.9.1-3+deb10u1] (2.9.1-3+deb10u2 Raspbian:stable [armhf]) []
                      Inst libfreetype6 [2.9.1-3+deb10u1] (2.9.1-3+deb10u2 Raspbian:stable [armhf])
                      Inst libmariadb3 [1:10.3.22-0+deb10u1] (1:10.3.25-0+deb10u1 Raspbian:stable [armhf])
                      Inst libraspberrypi-doc [1.20200601-1] (1.20201022-1 Raspberry Pi Foundation:testing [armhf]) []
                      Inst libraspberrypi-dev [1.20200601-1] (1.20201022-1 Raspberry Pi Foundation:testing [armhf]) []
                      Inst raspberrypi-kernel [1.20200601-1] (1.20201022-1 Raspberry Pi Foundation:testing [armhf]) []
                      Inst libraspberrypi-bin [1.20200601-1] (1.20201022-1 Raspberry Pi Foundation:testing [armhf]) []
                      Inst libraspberrypi0 [1.20200601-1] (1.20201022-1 Raspberry Pi Foundation:testing [armhf]) []
                      Inst raspberrypi-bootloader [1.20200601-1] (1.20201022-1 Raspberry Pi Foundation:testing [armhf])
                      Inst libx11-data [2:1.6.7-1] (2:1.6.7-1+deb10u1 Raspbian:stable [all])
                      Inst libx11-6 [2:1.6.7-1] (2:1.6.7-1+deb10u1 Raspbian:stable [armhf])
                      Inst mariadb-client [1:10.3.22-0+deb10u1] (1:10.3.25-0+deb10u1 Raspbian:stable [all])
                      Inst mariadb-server [1:10.3.22-0+deb10u1] (1:10.3.25-0+deb10u1 Raspbian:stable [all])
                      Inst nfs-common [1:1.3.4-2.5] (1:1.3.4-2.5+deb10u1 Raspbian:stable [armhf])
                      Inst raspberrypi-sys-mods [20200514] (20201026 Raspberry Pi Foundation:testing [armhf])
                      Inst pi-bluetooth [0.1.13] (0.1.15 Raspberry Pi Foundation:testing [all])
                      Inst raspi-config [20200601] (20201108 Raspberry Pi Foundation:testing [all])
                      Inst rpi-eeprom [7.4-1] (10.2-1 Raspberry Pi Foundation:testing [armhf])
                      Inst rpi-eeprom-images [7.4-1] (10.2-1 Raspberry Pi Foundation:testing [armhf])
                      Conf mariadb-server-core-10.3 (1:10.3.25-0+deb10u1 Raspbian:stable [armhf])
                      Conf libdbi-perl (1.642-1+deb10u1 Raspbian:stable [armhf])
                      Conf mariadb-client-core-10.3 (1:10.3.25-0+deb10u1 Raspbian:stable [armhf])
                      Conf mariadb-client-10.3 (1:10.3.25-0+deb10u1 Raspbian:stable [armhf])
                      Conf mariadb-server-10.3 (1:10.3.25-0+deb10u1 Raspbian:stable [armhf])
                      Conf libpython3.7 (3.7.3-2+deb10u2 Raspbian:stable [armhf])
                      Conf python3.7 (3.7.3-2+deb10u2 Raspbian:stable [armhf])
                      Conf libpython3.7-stdlib (3.7.3-2+deb10u2 Raspbian:stable [armhf])
                      Conf python3.7-minimal (3.7.3-2+deb10u2 Raspbian:stable [armhf])
                      Conf libpython3.7-minimal (3.7.3-2+deb10u2 Raspbian:stable [armhf])
                      Conf tzdata (2020d-0+deb10u1 Raspbian:stable [all])
                      Conf libjson-c3 (0.12.1+ds-2+deb10u1 Raspbian:stable [armhf])
                      Conf bind9-host (1:9.11.5.P4+dfsg-5.1+deb10u2 Raspbian:stable [armhf])
                      Conf libbind9-161 (1:9.11.5.P4+dfsg-5.1+deb10u2 Raspbian:stable [armhf])
                      Conf libisccfg163 (1:9.11.5.P4+dfsg-5.1+deb10u2 Raspbian:stable [armhf])
                      Conf libisccc161 (1:9.11.5.P4+dfsg-5.1+deb10u2 Raspbian:stable [armhf])
                      Conf libdns1104 (1:9.11.5.P4+dfsg-5.1+deb10u2 Raspbian:stable [armhf])
                      Conf libisc1100 (1:9.11.5.P4+dfsg-5.1+deb10u2 Raspbian:stable [armhf])
                      Conf liblwres161 (1:9.11.5.P4+dfsg-5.1+deb10u2 Raspbian:stable [armhf])
                      Conf libdbus-1-dev (1.12.20-0+deb10u1 Raspbian:stable [armhf])
                      Conf dbus (1.12.20-0+deb10u1 Raspbian:stable [armhf])
                      Conf libdbus-1-3 (1.12.20-0+deb10u1 Raspbian:stable [armhf])
                      Conf bluez (5.50-1.2~deb10u1+rpt2 Raspberry Pi Foundation:testing [armhf])
                      Conf bluez-firmware (1.2-4+rpt6 Raspberry Pi Foundation:testing [all])
                      Conf firmware-atheros (1:20190114-1+rpt9 Raspberry Pi Foundation:testing [all])
                      Conf firmware-brcm80211 (1:20190114-1+rpt9 Raspberry Pi Foundation:testing [all])
                      Conf firmware-libertas (1:20190114-1+rpt9 Raspberry Pi Foundation:testing [all])
                      Conf firmware-misc-nonfree (1:20190114-1+rpt9 Raspberry Pi Foundation:testing [all])
                      Conf firmware-realtek (1:20190114-1+rpt9 Raspberry Pi Foundation:testing [all])
                      Conf libisc-export1100 (1:9.11.5.P4+dfsg-5.1+deb10u2 Raspbian:stable [armhf])
                      Conf libdns-export1104 (1:9.11.5.P4+dfsg-5.1+deb10u2 Raspbian:stable [armhf])
                      Conf libfreetype6-dev (2.9.1-3+deb10u2 Raspbian:stable [armhf])
                      Conf libfreetype6 (2.9.1-3+deb10u2 Raspbian:stable [armhf])
                      Conf libmariadb3 (1:10.3.25-0+deb10u1 Raspbian:stable [armhf])
                      Conf libraspberrypi-doc (1.20201022-1 Raspberry Pi Foundation:testing [armhf])
                      Conf libraspberrypi-dev (1.20201022-1 Raspberry Pi Foundation:testing [armhf])
                      Conf raspberrypi-kernel (1.20201022-1 Raspberry Pi Foundation:testing [armhf])
                      Conf libraspberrypi-bin (1.20201022-1 Raspberry Pi Foundation:testing [armhf])
                      Conf libraspberrypi0 (1.20201022-1 Raspberry Pi Foundation:testing [armhf])
                      Conf raspberrypi-bootloader (1.20201022-1 Raspberry Pi Foundation:testing [armhf])
                      Conf libx11-data (2:1.6.7-1+deb10u1 Raspbian:stable [all])
                      Conf libx11-6 (2:1.6.7-1+deb10u1 Raspbian:stable [armhf])
                      Conf mariadb-client (1:10.3.25-0+deb10u1 Raspbian:stable [all])
                      Conf mariadb-server (1:10.3.25-0+deb10u1 Raspbian:stable [all])
                      Conf nfs-common (1:1.3.4-2.5+deb10u1 Raspbian:stable [armhf])
                      Conf raspberrypi-sys-mods (20201026 Raspberry Pi Foundation:testing [armhf])
                      Conf pi-bluetooth (0.1.15 Raspberry Pi Foundation:testing [all])
                      Conf raspi-config (20201108 Raspberry Pi Foundation:testing [all])
                      Conf rpi-eeprom (10.2-1 Raspberry Pi Foundation:testing [armhf])
                      Conf rpi-eeprom-images (10.2-1 Raspberry Pi Foundation:testing [armhf])
                      
                      
                      Thomas BraunT 1 Antwort Letzte Antwort
                      0
                      • ? Ein ehemaliger Benutzer

                        @Thomas-Braun
                        ah ok die 10.2 sehe ich und dann sollte ich das wohl durchführen:

                        pi@IOBraspi:~ $ sudo apt dist-upgrade --dry-run
                        Paketlisten werden gelesen... Fertig
                        Abhängigkeitsbaum wird aufgebaut.
                        Statusinformationen werden eingelesen.... Fertig
                        Paketaktualisierung (Upgrade) wird berechnet... Fertig
                        Das folgende Paket wurde automatisch installiert und wird nicht mehr benötigt:
                          rpi-eeprom-images
                        Verwenden Sie »sudo apt autoremove«, um es zu entfernen.
                        Die folgenden Pakete werden aktualisiert (Upgrade):
                          base-files bind9-host bluez bluez-firmware dbus firmware-atheros firmware-brcm80211 firmware-libertas firmware-misc-nonfree firmware-realtek libbind9-161
                          libdbi-perl libdbus-1-3 libdbus-1-dev libdns-export1104 libdns1104 libfreetype6 libfreetype6-dev libgnutls30 libisc-export1100 libisc1100 libisccc161
                          libisccfg163 libjson-c3 liblwres161 libmariadb3 libpython3.7 libpython3.7-minimal libpython3.7-stdlib libraspberrypi-bin libraspberrypi-dev
                          libraspberrypi-doc libraspberrypi0 libx11-6 libx11-data mariadb-client mariadb-client-10.3 mariadb-client-core-10.3 mariadb-common mariadb-server
                          mariadb-server-10.3 mariadb-server-core-10.3 nfs-common pi-bluetooth python3.7 python3.7-minimal raspberrypi-bootloader raspberrypi-kernel
                          raspberrypi-sys-mods raspi-config rpi-eeprom rpi-eeprom-images tzdata
                        53 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
                        Inst base-files [10.3+rpi1+deb10u4] (10.3+rpi1+deb10u6 Raspbian:stable [armhf])
                        Conf base-files (10.3+rpi1+deb10u6 Raspbian:stable [armhf])
                        Inst mariadb-common [1:10.3.22-0+deb10u1] (1:10.3.25-0+deb10u1 Raspbian:stable [all])
                        Inst libgnutls30 [3.6.7-4+deb10u4] (3.6.7-4+deb10u5 Raspbian:stable [armhf])
                        Conf libgnutls30 (3.6.7-4+deb10u5 Raspbian:stable [armhf])
                        Inst mariadb-server-core-10.3 [1:10.3.22-0+deb10u1] (1:10.3.25-0+deb10u1 Raspbian:stable [armhf])
                        Inst libdbi-perl [1.642-1+b1] (1.642-1+deb10u1 Raspbian:stable [armhf])
                        Inst mariadb-client-core-10.3 [1:10.3.22-0+deb10u1] (1:10.3.25-0+deb10u1 Raspbian:stable [armhf])
                        Inst mariadb-client-10.3 [1:10.3.22-0+deb10u1] (1:10.3.25-0+deb10u1 Raspbian:stable [armhf])
                        Conf mariadb-common (1:10.3.25-0+deb10u1 Raspbian:stable [all])
                        Inst mariadb-server-10.3 [1:10.3.22-0+deb10u1] (1:10.3.25-0+deb10u1 Raspbian:stable [armhf])
                        Inst libpython3.7 [3.7.3-2+deb10u1] (3.7.3-2+deb10u2 Raspbian:stable [armhf]) []
                        Inst python3.7 [3.7.3-2+deb10u1] (3.7.3-2+deb10u2 Raspbian:stable [armhf]) []
                        Inst libpython3.7-stdlib [3.7.3-2+deb10u1] (3.7.3-2+deb10u2 Raspbian:stable [armhf]) []
                        Inst python3.7-minimal [3.7.3-2+deb10u1] (3.7.3-2+deb10u2 Raspbian:stable [armhf]) []
                        Inst libpython3.7-minimal [3.7.3-2+deb10u1] (3.7.3-2+deb10u2 Raspbian:stable [armhf])
                        Inst tzdata [2020a-0+deb10u1] (2020d-0+deb10u1 Raspbian:stable [all])
                        Inst libjson-c3 [0.12.1+ds-2] (0.12.1+ds-2+deb10u1 Raspbian:stable [armhf])
                        Inst bind9-host [1:9.11.5.P4+dfsg-5.1+deb10u1] (1:9.11.5.P4+dfsg-5.1+deb10u2 Raspbian:stable [armhf]) []
                        Inst libbind9-161 [1:9.11.5.P4+dfsg-5.1+deb10u1] (1:9.11.5.P4+dfsg-5.1+deb10u2 Raspbian:stable [armhf]) []
                        Inst libisccfg163 [1:9.11.5.P4+dfsg-5.1+deb10u1] (1:9.11.5.P4+dfsg-5.1+deb10u2 Raspbian:stable [armhf]) []
                        Inst libisccc161 [1:9.11.5.P4+dfsg-5.1+deb10u1] (1:9.11.5.P4+dfsg-5.1+deb10u2 Raspbian:stable [armhf]) []
                        Inst libdns1104 [1:9.11.5.P4+dfsg-5.1+deb10u1] (1:9.11.5.P4+dfsg-5.1+deb10u2 Raspbian:stable [armhf]) []
                        Inst libisc1100 [1:9.11.5.P4+dfsg-5.1+deb10u1] (1:9.11.5.P4+dfsg-5.1+deb10u2 Raspbian:stable [armhf]) []
                        Inst liblwres161 [1:9.11.5.P4+dfsg-5.1+deb10u1] (1:9.11.5.P4+dfsg-5.1+deb10u2 Raspbian:stable [armhf])
                        Inst libdbus-1-dev [1.12.16-1] (1.12.20-0+deb10u1 Raspbian:stable [armhf]) []
                        Inst dbus [1.12.16-1] (1.12.20-0+deb10u1 Raspbian:stable [armhf]) []
                        Inst libdbus-1-3 [1.12.16-1] (1.12.20-0+deb10u1 Raspbian:stable [armhf])
                        Inst bluez [5.50-1.2~deb10u1+rpt1] (5.50-1.2~deb10u1+rpt2 Raspberry Pi Foundation:testing [armhf])
                        Inst bluez-firmware [1.2-4+rpt3] (1.2-4+rpt6 Raspberry Pi Foundation:testing [all])
                        Inst firmware-atheros [1:20190114-1+rpt7] (1:20190114-1+rpt9 Raspberry Pi Foundation:testing [all])
                        Inst firmware-brcm80211 [1:20190114-1+rpt7] (1:20190114-1+rpt9 Raspberry Pi Foundation:testing [all])
                        Inst firmware-libertas [1:20190114-1+rpt7] (1:20190114-1+rpt9 Raspberry Pi Foundation:testing [all])
                        Inst firmware-misc-nonfree [1:20190114-1+rpt7] (1:20190114-1+rpt9 Raspberry Pi Foundation:testing [all])
                        Inst firmware-realtek [1:20190114-1+rpt7] (1:20190114-1+rpt9 Raspberry Pi Foundation:testing [all])
                        Inst libisc-export1100 [1:9.11.5.P4+dfsg-5.1+deb10u1] (1:9.11.5.P4+dfsg-5.1+deb10u2 Raspbian:stable [armhf])
                        Inst libdns-export1104 [1:9.11.5.P4+dfsg-5.1+deb10u1] (1:9.11.5.P4+dfsg-5.1+deb10u2 Raspbian:stable [armhf])
                        Inst libfreetype6-dev [2.9.1-3+deb10u1] (2.9.1-3+deb10u2 Raspbian:stable [armhf]) []
                        Inst libfreetype6 [2.9.1-3+deb10u1] (2.9.1-3+deb10u2 Raspbian:stable [armhf])
                        Inst libmariadb3 [1:10.3.22-0+deb10u1] (1:10.3.25-0+deb10u1 Raspbian:stable [armhf])
                        Inst libraspberrypi-doc [1.20200601-1] (1.20201022-1 Raspberry Pi Foundation:testing [armhf]) []
                        Inst libraspberrypi-dev [1.20200601-1] (1.20201022-1 Raspberry Pi Foundation:testing [armhf]) []
                        Inst raspberrypi-kernel [1.20200601-1] (1.20201022-1 Raspberry Pi Foundation:testing [armhf]) []
                        Inst libraspberrypi-bin [1.20200601-1] (1.20201022-1 Raspberry Pi Foundation:testing [armhf]) []
                        Inst libraspberrypi0 [1.20200601-1] (1.20201022-1 Raspberry Pi Foundation:testing [armhf]) []
                        Inst raspberrypi-bootloader [1.20200601-1] (1.20201022-1 Raspberry Pi Foundation:testing [armhf])
                        Inst libx11-data [2:1.6.7-1] (2:1.6.7-1+deb10u1 Raspbian:stable [all])
                        Inst libx11-6 [2:1.6.7-1] (2:1.6.7-1+deb10u1 Raspbian:stable [armhf])
                        Inst mariadb-client [1:10.3.22-0+deb10u1] (1:10.3.25-0+deb10u1 Raspbian:stable [all])
                        Inst mariadb-server [1:10.3.22-0+deb10u1] (1:10.3.25-0+deb10u1 Raspbian:stable [all])
                        Inst nfs-common [1:1.3.4-2.5] (1:1.3.4-2.5+deb10u1 Raspbian:stable [armhf])
                        Inst raspberrypi-sys-mods [20200514] (20201026 Raspberry Pi Foundation:testing [armhf])
                        Inst pi-bluetooth [0.1.13] (0.1.15 Raspberry Pi Foundation:testing [all])
                        Inst raspi-config [20200601] (20201108 Raspberry Pi Foundation:testing [all])
                        Inst rpi-eeprom [7.4-1] (10.2-1 Raspberry Pi Foundation:testing [armhf])
                        Inst rpi-eeprom-images [7.4-1] (10.2-1 Raspberry Pi Foundation:testing [armhf])
                        Conf mariadb-server-core-10.3 (1:10.3.25-0+deb10u1 Raspbian:stable [armhf])
                        Conf libdbi-perl (1.642-1+deb10u1 Raspbian:stable [armhf])
                        Conf mariadb-client-core-10.3 (1:10.3.25-0+deb10u1 Raspbian:stable [armhf])
                        Conf mariadb-client-10.3 (1:10.3.25-0+deb10u1 Raspbian:stable [armhf])
                        Conf mariadb-server-10.3 (1:10.3.25-0+deb10u1 Raspbian:stable [armhf])
                        Conf libpython3.7 (3.7.3-2+deb10u2 Raspbian:stable [armhf])
                        Conf python3.7 (3.7.3-2+deb10u2 Raspbian:stable [armhf])
                        Conf libpython3.7-stdlib (3.7.3-2+deb10u2 Raspbian:stable [armhf])
                        Conf python3.7-minimal (3.7.3-2+deb10u2 Raspbian:stable [armhf])
                        Conf libpython3.7-minimal (3.7.3-2+deb10u2 Raspbian:stable [armhf])
                        Conf tzdata (2020d-0+deb10u1 Raspbian:stable [all])
                        Conf libjson-c3 (0.12.1+ds-2+deb10u1 Raspbian:stable [armhf])
                        Conf bind9-host (1:9.11.5.P4+dfsg-5.1+deb10u2 Raspbian:stable [armhf])
                        Conf libbind9-161 (1:9.11.5.P4+dfsg-5.1+deb10u2 Raspbian:stable [armhf])
                        Conf libisccfg163 (1:9.11.5.P4+dfsg-5.1+deb10u2 Raspbian:stable [armhf])
                        Conf libisccc161 (1:9.11.5.P4+dfsg-5.1+deb10u2 Raspbian:stable [armhf])
                        Conf libdns1104 (1:9.11.5.P4+dfsg-5.1+deb10u2 Raspbian:stable [armhf])
                        Conf libisc1100 (1:9.11.5.P4+dfsg-5.1+deb10u2 Raspbian:stable [armhf])
                        Conf liblwres161 (1:9.11.5.P4+dfsg-5.1+deb10u2 Raspbian:stable [armhf])
                        Conf libdbus-1-dev (1.12.20-0+deb10u1 Raspbian:stable [armhf])
                        Conf dbus (1.12.20-0+deb10u1 Raspbian:stable [armhf])
                        Conf libdbus-1-3 (1.12.20-0+deb10u1 Raspbian:stable [armhf])
                        Conf bluez (5.50-1.2~deb10u1+rpt2 Raspberry Pi Foundation:testing [armhf])
                        Conf bluez-firmware (1.2-4+rpt6 Raspberry Pi Foundation:testing [all])
                        Conf firmware-atheros (1:20190114-1+rpt9 Raspberry Pi Foundation:testing [all])
                        Conf firmware-brcm80211 (1:20190114-1+rpt9 Raspberry Pi Foundation:testing [all])
                        Conf firmware-libertas (1:20190114-1+rpt9 Raspberry Pi Foundation:testing [all])
                        Conf firmware-misc-nonfree (1:20190114-1+rpt9 Raspberry Pi Foundation:testing [all])
                        Conf firmware-realtek (1:20190114-1+rpt9 Raspberry Pi Foundation:testing [all])
                        Conf libisc-export1100 (1:9.11.5.P4+dfsg-5.1+deb10u2 Raspbian:stable [armhf])
                        Conf libdns-export1104 (1:9.11.5.P4+dfsg-5.1+deb10u2 Raspbian:stable [armhf])
                        Conf libfreetype6-dev (2.9.1-3+deb10u2 Raspbian:stable [armhf])
                        Conf libfreetype6 (2.9.1-3+deb10u2 Raspbian:stable [armhf])
                        Conf libmariadb3 (1:10.3.25-0+deb10u1 Raspbian:stable [armhf])
                        Conf libraspberrypi-doc (1.20201022-1 Raspberry Pi Foundation:testing [armhf])
                        Conf libraspberrypi-dev (1.20201022-1 Raspberry Pi Foundation:testing [armhf])
                        Conf raspberrypi-kernel (1.20201022-1 Raspberry Pi Foundation:testing [armhf])
                        Conf libraspberrypi-bin (1.20201022-1 Raspberry Pi Foundation:testing [armhf])
                        Conf libraspberrypi0 (1.20201022-1 Raspberry Pi Foundation:testing [armhf])
                        Conf raspberrypi-bootloader (1.20201022-1 Raspberry Pi Foundation:testing [armhf])
                        Conf libx11-data (2:1.6.7-1+deb10u1 Raspbian:stable [all])
                        Conf libx11-6 (2:1.6.7-1+deb10u1 Raspbian:stable [armhf])
                        Conf mariadb-client (1:10.3.25-0+deb10u1 Raspbian:stable [all])
                        Conf mariadb-server (1:10.3.25-0+deb10u1 Raspbian:stable [all])
                        Conf nfs-common (1:1.3.4-2.5+deb10u1 Raspbian:stable [armhf])
                        Conf raspberrypi-sys-mods (20201026 Raspberry Pi Foundation:testing [armhf])
                        Conf pi-bluetooth (0.1.15 Raspberry Pi Foundation:testing [all])
                        Conf raspi-config (20201108 Raspberry Pi Foundation:testing [all])
                        Conf rpi-eeprom (10.2-1 Raspberry Pi Foundation:testing [armhf])
                        Conf rpi-eeprom-images (10.2-1 Raspberry Pi Foundation:testing [armhf])
                        
                        
                        Thomas BraunT Online
                        Thomas BraunT Online
                        Thomas Braun
                        Most Active
                        schrieb am zuletzt editiert von Thomas Braun
                        #14

                        @Pete0815
                        Ja, passt.

                        Dann jetzt 'scharf' schalten:

                        sudo apt dist-upgrade
                        sudo reboot
                        

                        Den (vermutlich) laufenden X-Server würde ich allerdings auf einem Server abschalten.

                        Linux-Werkzeugkasten:
                        https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                        NodeJS Fixer Skript:
                        https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                        iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                        ? 1 Antwort Letzte Antwort
                        0
                        • Thomas BraunT Thomas Braun

                          @Pete0815
                          Ja, passt.

                          Dann jetzt 'scharf' schalten:

                          sudo apt dist-upgrade
                          sudo reboot
                          

                          Den (vermutlich) laufenden X-Server würde ich allerdings auf einem Server abschalten.

                          ? Offline
                          ? Offline
                          Ein ehemaliger Benutzer
                          schrieb am zuletzt editiert von
                          #15

                          @Thomas-Braun said in RPI4 Updaten auf aktuellen Status?:

                          Den (vermutlich) laufenden X-Server würde ich allerdings auf einem Server abschalten.

                          Was meinst Du damit? Läuft dort etwas was ich nicht brauche oder besser nie brauchen werde?

                          Thomas BraunT 1 Antwort Letzte Antwort
                          0
                          • ? Ein ehemaliger Benutzer

                            @Thomas-Braun said in RPI4 Updaten auf aktuellen Status?:

                            Den (vermutlich) laufenden X-Server würde ich allerdings auf einem Server abschalten.

                            Was meinst Du damit? Läuft dort etwas was ich nicht brauche oder besser nie brauchen werde?

                            Thomas BraunT Online
                            Thomas BraunT Online
                            Thomas Braun
                            Most Active
                            schrieb am zuletzt editiert von
                            #16

                            @Pete0815
                            Vermutlich ja. Aber da können wir uns wenn du magst später drum kümmern.

                            Wenn das System wieder auf die Beine gekommen ist noch

                            sudo apt autoremove
                            

                            ausführen.

                            Linux-Werkzeugkasten:
                            https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                            NodeJS Fixer Skript:
                            https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                            iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                            ? 1 Antwort Letzte Antwort
                            0
                            • Thomas BraunT Thomas Braun

                              @Pete0815
                              Vermutlich ja. Aber da können wir uns wenn du magst später drum kümmern.

                              Wenn das System wieder auf die Beine gekommen ist noch

                              sudo apt autoremove
                              

                              ausführen.

                              ? Offline
                              ? Offline
                              Ein ehemaliger Benutzer
                              schrieb am zuletzt editiert von
                              #17

                              @Thomas-Braun
                              Danke, perfekt. Das System läuft wieder und 03.09.2020 EEprom ist auch drauf :)

                              Thomas BraunT 1 Antwort Letzte Antwort
                              0
                              • ? Ein ehemaliger Benutzer

                                @Thomas-Braun
                                Danke, perfekt. Das System läuft wieder und 03.09.2020 EEprom ist auch drauf :)

                                Thomas BraunT Online
                                Thomas BraunT Online
                                Thomas Braun
                                Most Active
                                schrieb am zuletzt editiert von
                                #18

                                @Pete0815
                                Alles aktuell?
                                Mit

                                sudo apt update
                                

                                schauen. Und das dann künftig regelmäßiger machen.

                                who -r
                                

                                liefert?

                                Linux-Werkzeugkasten:
                                https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                                NodeJS Fixer Skript:
                                https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                                iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                                ? 1 Antwort Letzte Antwort
                                0
                                • Thomas BraunT Thomas Braun

                                  @Pete0815
                                  Alles aktuell?
                                  Mit

                                  sudo apt update
                                  

                                  schauen. Und das dann künftig regelmäßiger machen.

                                  who -r
                                  

                                  liefert?

                                  ? Offline
                                  ? Offline
                                  Ein ehemaliger Benutzer
                                  schrieb am zuletzt editiert von Ein ehemaliger Benutzer
                                  #19

                                  ok, thx

                                  @Thomas-Braun said in RPI4 Updaten auf aktuellen Status?:

                                  who -r liefert?

                                  Runlevel 5   2020-11-10 16:49
                                  
                                  
                                  Thomas BraunT 1 Antwort Letzte Antwort
                                  0
                                  • ? Ein ehemaliger Benutzer

                                    ok, thx

                                    @Thomas-Braun said in RPI4 Updaten auf aktuellen Status?:

                                    who -r liefert?

                                    Runlevel 5   2020-11-10 16:49
                                    
                                    
                                    Thomas BraunT Online
                                    Thomas BraunT Online
                                    Thomas Braun
                                    Most Active
                                    schrieb am zuletzt editiert von
                                    #20

                                    @Pete0815
                                    Das würde ich auf einem Server auf das dafür vorgesehene RunLeve 3 setzen.

                                    sudo raspi-config
                                    

                                    Dann dort Menüpunkt
                                    1 - S5 - B1

                                    Dann ist der unnötige Desktop-Betrieb auf Eis gelegt.

                                    Linux-Werkzeugkasten:
                                    https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                                    NodeJS Fixer Skript:
                                    https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                                    iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                                    ? 1 Antwort Letzte Antwort
                                    0
                                    • Thomas BraunT Thomas Braun

                                      @Pete0815
                                      Das würde ich auf einem Server auf das dafür vorgesehene RunLeve 3 setzen.

                                      sudo raspi-config
                                      

                                      Dann dort Menüpunkt
                                      1 - S5 - B1

                                      Dann ist der unnötige Desktop-Betrieb auf Eis gelegt.

                                      ? Offline
                                      ? Offline
                                      Ein ehemaliger Benutzer
                                      schrieb am zuletzt editiert von
                                      #21

                                      @Thomas-Braun
                                      Danke. Das sollte ungenutzte Ressourcen freigeben.

                                      Thomas BraunT 1 Antwort Letzte Antwort
                                      0
                                      • ? Ein ehemaliger Benutzer

                                        @Thomas-Braun
                                        Danke. Das sollte ungenutzte Ressourcen freigeben.

                                        Thomas BraunT Online
                                        Thomas BraunT Online
                                        Thomas Braun
                                        Most Active
                                        schrieb am zuletzt editiert von
                                        #22

                                        @Pete0815
                                        Das sollte wohl eher 'unnütz gebundene Ressourcen freigeben' heißen. ;-)

                                        Linux-Werkzeugkasten:
                                        https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                                        NodeJS Fixer Skript:
                                        https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                                        iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                                        ? 1 Antwort Letzte Antwort
                                        0
                                        • Thomas BraunT Thomas Braun

                                          @Pete0815
                                          Das sollte wohl eher 'unnütz gebundene Ressourcen freigeben' heißen. ;-)

                                          ? Offline
                                          ? Offline
                                          Ein ehemaliger Benutzer
                                          schrieb am zuletzt editiert von
                                          #23

                                          @Thomas-Braun said in RPI4 Updaten auf aktuellen Status?:

                                          @Pete0815
                                          Das sollte wohl eher 'unnütz gebundene Ressourcen freigeben' heißen. ;-)

                                          :joy:

                                          Thomas BraunT 1 Antwort Letzte Antwort
                                          0
                                          Antworten
                                          • In einem neuen Thema antworten
                                          Anmelden zum Antworten
                                          • Älteste zuerst
                                          • Neuste zuerst
                                          • Meiste Stimmen


                                          Support us

                                          ioBroker
                                          Community Adapters
                                          Donate

                                          703

                                          Online

                                          32.7k

                                          Benutzer

                                          82.4k

                                          Themen

                                          1.3m

                                          Beiträge
                                          Community
                                          Impressum | Datenschutz-Bestimmungen | Nutzungsbedingungen | Einwilligungseinstellungen
                                          ioBroker Community 2014-2025
                                          logo
                                          • Anmelden

                                          • Du hast noch kein Konto? Registrieren

                                          • Anmelden oder registrieren, um zu suchen
                                          • Erster Beitrag
                                            Letzter Beitrag
                                          0
                                          • Home
                                          • Aktuell
                                          • Tags
                                          • Ungelesen 0
                                          • Kategorien
                                          • Unreplied
                                          • Beliebt
                                          • GitHub
                                          • Docu
                                          • Hilfe