keine Adapterliste nach versuchter Multihost Installation

[kiste01]

Hallo liebe Community,

Ich habe gestern mein sehr gut laufendes System versucht auf eine Multi-Host Installation umzustellen. Hintergrund ist nur, dass den Secondary räumlich mit einem cc2531 und zigbee.Adapter agieren soll. Der Primary ist ein raspi4 auf dem ich erstmal ein update von nodejs 10.x auf 12.18.4 gemacht habe. Damit waren primary und secondary (frisch aufgesetzt) versionsseitig auf dem gleichen stand. Anschließend habe ich versucht beide iobroker mittels ...enable und ... connect zu verbinden. Auf dem secondary wurde auch der Host angezeigt und die passphrase akzeptiert. Leider zeigte der Primary aber den secondary nicht an. Die ersten Recherchen haben mich dann auf das Thema redis gebracht. Durch die entsprechenden Hinweise sollte eine Anpassung mittels
iobroker setup custom sowie
nano /etc/redis/redis.conf
helfen. Erfolgreich war ich leider nicht, der secondary wurde nicht agezeigt.
Wahrscheinlich habe ich beim basteln auch etwas verstellt - die Adapterliste wird nicht angezeigt, das Fenster bleibt leer.

Ich habe danach versucht wieder den alten Zustand durch ein Restore wieder herzustellen. Dank backitup wurde das Backup auch schnell eingespielt.

Aber. Die Adapterliste wird weiterhin nicht angezeigt, das Fenster bleibt leer.

[Homoran]

@kiste01 sagte in keine Adapterliste nach versuchter Multihost Installation:

Die Adapterliste wird weiterhin nicht angezeigt, das Fenster bleibt leer.

Auf dem primary oder auf dem secondary?

Das ist üblicherweise ein Anzeichen auf ein Problem mit dem DNS Server.

@kiste01 sagte in keine Adapterliste nach versuchter Multihost Installation:

Die ersten Recherchen haben mich dann auf das Thema redis gebracht.

Hast du denn Redis installiert?

[kiste01]

@Homoran
Den secondary habe ich erstmal wieder kurz zu den Akten gelegt, weil er eben nicht angezeigt wird. Deswegen habe ich das Backup wieder eingespielt auf dem Primaray

Auf dem primary sehe die Adapter Liste nicht (mehr). Die Abfrage des iobroker status sagt
states type: redis

[Homoran]

@kiste01 sagte in keine Adapterliste nach versuchter Multihost Installation:

Den secondary habe ich erstmal wieder kurz zu den Akten gelegt,

Dann dazu später.

Kannst von der Konsole aus einen pingvauf Google.com absetzen?
Welchen aktiven Verwahrungsort mit welchem Pfad nutzst du?

[kiste01]

@Homoran
Ping gehen fleißig raus

Verwahrorte meinst du aus dem Admin Adapter?
default http://download.iobroker.net/sources-dist.json
latest http://download.iobroker.net/sources-dist-latest.json

[jonny-007]

@kiste01

Verwahrorte meinst du aus dem Admin Adapter?
default http://download.iobroker.net/sources-dist.json
latest http://download.iobroker.net/sources-dist-latest.json

bei mir ging auch keine Aktualisierung mehr.

Nimm mal diese Verwahrorte:

latest: http://iobroker.live/repo/sources-dist-latest.json

default: http://iobroker.live/repo/sources-dist.json

seit der änderung läuft es bei mir wieder.

Jonny

[Homoran]

@kiste01 sagte in keine Adapterliste nach versuchter Multihost Installation:

Verwahrorte meinst du aus dem Admin Adapter?

Ja, und welchen du davon unter Haupteinstellungen als aktiven Verwahrungsort ausgewählt hast.

[kiste01]

@Homoran

da ist latest ausgewählt

[Homoran]

@kiste01 du weisst dass latest gleichbedeutend mit BETA ist?

Dann nimm mal testweise den Pfad zu latest, den @jonny-007 gepostet hat

[Thomas Braun]

@kiste01
Was passiert denn auf der Konsole?

iobroker update
iobroker upgrade

[kiste01]

@Homoran

ich erinnere mich dunkel, dass ich das mal in einem nicht mehr bekannten Zusammenhang umgestellt habe. Aber beta war jetzt keine Absicht.

Also ich habe es wie von @jonny-007 vorgeschlagen eingetragen und umgestellt. iobroker start / stop - leider keine Veränderung

[kiste01]

@Thomas-Braun said in keine Adapterliste nach versuchter Multihost Installation:

beides läuft normal durch

bei iobroker update kommt der Hinweis:
used repositiory: default
hash changed or no sources cached => force download of new sources
update done

[Thomas Braun]

@kiste01
Kannst du bitte die komplettte Ein- und Ausgabe in CodeTags posten. Keine Kürzungen.

[kiste01]

@Thomas-Braun

na klar

pi@raspberrypi-master:~ $ iobroker update
Used repository: default
hash changed or no sources cached => force download of new sources
update done
Adapter "admin" : 4.0.10 , installed 4.1.8
Adapter "alarm" : 1.2.3
Adapter "alexa2" : 3.3.1 , installed 3.3.1
Adapter "alpha2" : 1.0.0
Adapter "amazon-dash" : 1.1.0
Adapter "artnet" : 1.2.2
Adapter "asterisk" : 1.0.6
Adapter "asuswrt" : 1.0.1
Adapter "b-control-em" : 0.2.1
Adapter "backitup" : 1.6.7 , installed 1.6.7
Adapter "beckhoff" : 1.2.2
Adapter "benq" : 0.2.0
Adapter "binance" : 1.1.3
Adapter "ble" : 0.11.8
Adapter "bmw" : 1.3.3
Adapter "bosesoundtouch": 0.2.4
Adapter "botvac" : 1.0.0
Adapter "bring" : 1.7.2
Adapter "broadlink2" : 2.0.3 , installed 2.1.5
Adapter "bsblan" : 0.1.5
Adapter "bshb" : 0.1.10 , installed 0.1.10
Adapter "chromecast" : 2.3.1 , installed 2.3.1
Adapter "cloud" : 3.0.4 , installed 3.0.4
Adapter "comfoair" : 0.3.2
Adapter "contactid" : 1.0.1
Adapter "coronavirus-statistics": 0.6.0
Adapter "countdown" : 1.1.0
Adapter "cul" : 1.2.1
Adapter "daikin" : 1.0.5
Adapter "daswetter" : 3.0.1 , installed 3.0.3
Adapter "deconz" : 1.3.10 , installed 2.0.4
Adapter "denon" : 1.7.7
Adapter "devices" : 0.3.6 , installed 0.3.13
Adapter "digitalstrom" : 0.5.5
Adapter "discovergy" : 0.5.0
Adapter "discovery" : 2.3.7 , installed 2.3.11
Adapter "doorio" : 1.0.10
Adapter "ds18b20" : 1.1.4
Adapter "dwd" : 2.4.10
Adapter "ebus" : 2.1.1
Adapter "ecovacs-deebot": 1.0.3
Adapter "egigeozone" : 0.1.2
Adapter "ekey" : 1.1.0
Adapter "email" : 1.0.7
Adapter "emby" : 1.0.2
Adapter "energymanager" : 1.2.3
Adapter "enet" : 1.0.1
Adapter "epson_stylus_px830": 0.2.1
Adapter "exchangerates" : 0.0.13
Adapter "fakeroku" : 0.2.1
Adapter "fb-checkpresence": 1.0.4
Adapter "feiertage" : 1.0.17
Adapter "fhem" : 1.5.3
Adapter "find-my-iphone": 0.2.15
Adapter "firetv" : 0.0.27
Adapter "flot" : 1.9.2 , installed 1.10.2
Adapter "foobar2000" : 2.0.3
Adapter "fritzbox" : 0.2.1
Adapter "fritzdect" : 0.2.4
Adapter "fronius" : 1.0.5
Adapter "fullcalendar" : 1.1.0
Adapter "fullybrowser" : 2.0.1
Adapter "g-homa" : 0.5.3
Adapter "geofency" : 0.3.2
Adapter "gruenbeck" : 0.0.18
Adapter "habpanel" : 0.4.3
Adapter "haier" : 1.0.2
Adapter "ham" : 1.1.2 , installed 3.0.1
Adapter "ham-wemo" : 1.0.1
Adapter "harmony" : 1.2.2
Adapter "heatingcontrol": 0.5.7
Adapter "heytech" : 0.2.0
Adapter "hid" : 0.1.17
Adapter "history" : 1.9.10 , installed 1.9.10
Adapter "hm-rega" : 2.6.14 , installed 2.6.20
Adapter "hm-rpc" : 1.14.15 , installed 1.14.23
Adapter "hmip" : 1.2.2
Adapter "homeconnect" : 0.0.30
Adapter "homee" : 1.0.7
Adapter "homepilot" : 1.0.3
Adapter "hp-ilo" : 1.0.6
Adapter "hs100" : 2.0.1
Adapter "hue" : 3.3.5
Adapter "hue-extended" : 2.0.0
Adapter "ical" : 1.7.4
Adapter "icons-addictive-flavour-png": 0.1.0
Adapter "icons-fatcow-hosting": 0.1.0
Adapter "icons-icons8" : 0.0.1 , installed 0.0.1
Adapter "icons-material-png": 0.1.0
Adapter "icons-material-svg": 0.1.0
Adapter "icons-mfd-png" : 1.0.2
Adapter "icons-mfd-svg" : 1.0.2 , installed 1.0.2
Adapter "icons-open-icon-library-png": 0.1.2
Adapter "icons-ultimate-png": 1.0.1
Adapter "influxdb" : 1.9.1
Adapter "info" : 1.7.2 , installed 1.7.7
Adapter "innogy-smarthome": 0.3.6
Adapter "iogo" : 0.5.10
Adapter "iot" : 1.5.3 , installed 1.7.9
Adapter "iqontrol" : 1.2.4
Adapter "javascript" : 4.6.17 , installed 4.8.3
Adapter "jeelink" : 0.1.0
Controller "js-controller" : 3.1.6 , installed 3.1.6
Adapter "kecontact" : 0.1.0
Adapter "klf200" : 1.0.1
Adapter "km200" : 1.1.6
Adapter "knmi-weather" : 1.0.0
Adapter "knx" : 1.0.39
Adapter "kodi" : 2.0.4
Adapter "kress" : 2.5.5
Adapter "lametric" : 0.0.9
Adapter "landroid" : 1.0.3
Adapter "lcn" : 0.3.2
Adapter "letrika_comgw" : 0.0.5
Adapter "lgtv" : 1.1.10
Adapter "lgtv-rs" : 0.1.0
Adapter "lgtv11" : 1.0.5
Adapter "lifx" : 0.1.0
Adapter "lightify" : 0.2.16
Adapter "link" : 0.5.9
Adapter "linkeddevices" : 1.2.2
Adapter "logparser" : 1.0.4
Adapter "lovelace" : 1.0.16
Adapter "loxone" : 1.1.0
Adapter "luftdaten" : 0.0.17
Adapter "lupusec" : 1.2.6
Adapter "luxtronik1" : 0.2.2
Adapter "material" : 0.13.9
Adapter "maxcube" : 0.1.2 , installed 1.0.2
Adapter "maxcul" : 1.3.0
Adapter "mbus" : 2.2.2
Adapter "mclighting" : 0.1.1
Adapter "megad" : 1.2.1
Adapter "megadd" : 0.2.0
Adapter "megaesp" : 0.1.0
Adapter "melcloud" : 1.0.6
Adapter "mercedesme" : 0.0.21 , installed 0.0.21
Adapter "mercury" : 0.1.1
Adapter "meross" : 1.5.0 , installed 1.5.0
Adapter "meteoalarm" : 1.0.9
Adapter "midea" : 0.0.6
Adapter "miele" : 0.1.5
Adapter "mielecloudservice": 2.0.0
Adapter "mihome" : 1.3.0 , installed 1.3.5
Adapter "mihome-lamp" : 1.1.0
Adapter "mihome-plug" : 0.2.0
Adapter "mihome-vacuum" : 2.0.7 , installed 2.1.1
Adapter "mikrotik" : 1.0.11
Adapter "milight" : 0.3.6
Adapter "milight-smart-light": 0.2.7
Adapter "mobile" : 1.0.1 , installed 1.0.1
Adapter "modbus" : 3.1.6 , installed 3.1.9
Adapter "moma" : 1.2.6
Adapter "mpd" : 1.0.5
Adapter "mqtt" : 2.1.4 , installed 2.1.9
Adapter "mqtt-client" : 1.3.1 , installed 1.3.1
Adapter "musiccast" : 0.1.3
Adapter "mysensors" : 2.0.1
Adapter "nanoleaf-lightpanels": 0.8.1
Adapter "nello" : 2.0.6
Adapter "netatmo" : 1.3.1
Adapter "nibeuplink" : 0.3.0
Adapter "nina" : 0.0.22
Adapter "node-red" : 1.17.2 , installed 2.0.1
Adapter "nuki" : 1.3.1
Adapter "nuki-extended" : 2.3.0
Adapter "nut" : 1.1.3
Adapter "odl" : 1.0.5
Adapter "oilfox" : 0.0.5
Adapter "onkyo" : 2.0.3
Adapter "onvif" : 0.4.4
Adapter "openhab" : 1.1.0
Adapter "openligadb" : 1.1.0
Adapter "openweathermap": 0.1.0
Adapter "opi" : 0.1.1
Adapter "oppoplayer" : 0.2.1
Adapter "owfs" : 0.6.4
Adapter "owntracks" : 0.6.3
Adapter "panasonic-viera": 1.0.2
Adapter "parser" : 1.0.7
Adapter "paw" : 0.0.7
Adapter "phantomjs" : 1.0.1
Adapter "pi-hole" : 1.3.1
Adapter "piface" : 1.0.0
Adapter "pimatic" : 0.3.0
Adapter "ping" : 1.4.8 , installed 1.4.12
Adapter "places" : 1.0.0
Adapter "plex" : 0.8.11
Adapter "plexconnect" : 0.0.7
Adapter "pollenflug" : 1.0.6
Adapter "proxmox" : 1.0.1
Adapter "proxy" : 1.1.1
Adapter "pushbullet" : 0.0.11
Adapter "pushover" : 2.0.2
Adapter "pushsafer" : 0.1.8
Adapter "radar2" : 1.0.9 , installed 2.0.1
Adapter "radiohead" : 1.0.7
Adapter "rflink" : 2.0.0
Adapter "rickshaw" : 1.0.0
Adapter "ring" : 1.1.3
Adapter "robonect" : 0.1.3
Adapter "roomba" : 1.1.1
Adapter "rpi2" : 1.2.0 , installed 1.2.0
Adapter "s7" : 1.1.8
Adapter "samsung" : 0.2.9 , installed 0.2.9
Adapter "sayit" : 1.9.8
Adapter "sbfspot" : 4.0.0
Adapter "scenes" : 1.1.0 , installed 2.1.3
Adapter "schoolfree" : 0.6.3
Adapter "shelly" : 4.0.2 , installed 4.0.3
Adapter "shuttercontrol": 0.8.6 , installed 0.8.6
Adapter "sia" : 1.0.4
Adapter "siegenia" : 1.0.0
Adapter "simple-api" : 2.4.6 , installed 2.4.8
Adapter "smappee" : 0.2.2
Adapter "smartgarden" : 1.0.1
Adapter "smartmeter" : 3.1.2
Adapter "snips" : 1.5.1
Adapter "snmp" : 0.5.0
Adapter "socketio" : 3.0.13 , installed 3.0.13
Adapter "solarlog" : 2.0.0
Adapter "solarviewdatareader": 0.2.1
Adapter "solarwetter" : 1.0.0
Adapter "sonnen" : 1.6.0
Adapter "sonoff" : 2.3.3
Adapter "sonos" : 2.1.0
Adapter "sony-bravia" : 1.0.1
Adapter "spotify-premium": 1.0.0
Adapter "sql" : 1.15.2
Adapter "squeezebox" : 1.0.0
Adapter "squeezeboxrpc" : 1.0.0
Adapter "starline" : 1.0.0
Adapter "statistics" : 0.2.2
Adapter "stiebel-isg" : 1.5.1
Adapter "sunnyportal" : 0.1.5
Adapter "swiss-weather-api": 0.3.2
Adapter "synology" : 0.1.18
Adapter "systeminfo" : 0.3.1
Adapter "tahoma" : 0.3.2
Adapter "tankerkoenig" : 2.0.5
Adapter "telegram" : 1.5.9 , installed 1.5.9
Adapter "terminal" : 0.1.2 , installed 0.1.2
Adapter "tesla-motors" : 0.2.3
Adapter "text2command" : 1.3.0 , installed 2.0.3
Adapter "tinker" : 1.1.0
Adapter "tr-064" : 4.0.9
Adapter "tradfri" : 2.6.3
Adapter "trashschedule" : 0.0.11
Adapter "tunnelbroker-endpoint-updater": 0.0.1
Adapter "tuya" : 3.3.12 , installed 3.3.14
Adapter "tvspielfilm" : 1.0.4
Adapter "unifi" : 0.5.8
Adapter "upnp" : 1.0.16
Adapter "vaillant" : 0.0.10
Adapter "valloxmv" : 1.1.1
Adapter "vcard" : 0.0.9
Adapter "velux" : 0.0.5
Adapter "viessmann" : 1.3.0
Adapter "virtualpowermeter": 1.2.1
Adapter "vis" : 1.2.12 , installed 1.3.1
Adapter "vis-bars" : 0.1.4 , installed 0.1.4
Adapter "vis-canvas-gauges": 0.1.5
Adapter "vis-colorpicker": 1.1.1
Adapter "vis-fancyswitch": 1.1.0
Adapter "vis-google-fonts": 0.1.0
Adapter "vis-history" : 1.0.0
Adapter "vis-hqwidgets" : 1.1.4 , installed 1.1.5
Adapter "vis-icontwo" : 0.19.0
Adapter "vis-inventwo" : 1.3.8
Adapter "vis-jqui-mfd" : 1.0.12 , installed 1.0.12
Adapter "vis-justgage" : 1.0.2
Adapter "vis-keyboard" : 0.0.2
Adapter "vis-lcars" : 1.0.4
Adapter "vis-map" : 1.0.4
Adapter "vis-metro" : 1.1.2 , installed 1.1.2
Adapter "vis-players" : 0.1.6
Adapter "vis-plumb" : 1.0.2
Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2
Adapter "vis-timeandweather": 1.1.7 , installed 1.1.7
Adapter "vis-weather" : 2.5.2 , installed 2.5.2
Adapter "vr200" : 1.0.0
Adapter "vw-connect" : 0.0.15
Adapter "weatherunderground": 3.2.1
Adapter "web" : 3.0.12 , installed 3.0.13
Adapter "weishaupt-wem" : 0.0.8
Adapter "wiffi-wz" : 2.2.0
Adapter "wifilight" : 1.1.0
Adapter "windows-control": 0.1.5
Adapter "wled" : 0.5.2
Adapter "wm-bus" : 0.1.12
Adapter "wolf" : 0.9.2
Adapter "worx" : 1.2.3
Adapter "xbox" : 0.6.5
Adapter "xs1" : 1.0.2
Adapter "yahka" : 0.11.0
Adapter "yamaha" : 0.3.19
Adapter "yeelight-2" : 1.0.3
Adapter "youtube" : 0.0.11
Adapter "yr" : 2.0.3 , installed 2.0.3
Adapter "zigbee" : 1.2.1 , installed 1.2.1
Adapter "zont" : 0.5.3
Adapter "zwave" : 2.0.1 , installed 2.0.1
Adapter "zwave2" : 1.5.0
pi@raspberrypi-master:~ $ iobroker upgrade
Adapter "admin" is up to date.
Adapter "alarm" is not installed.
Adapter "alexa2" is up to date.
Adapter "alpha2" is not installed.
Adapter "amazon-dash" is not installed.
Adapter "artnet" is not installed.
Adapter "asterisk" is not installed.
Adapter "asuswrt" is not installed.
Adapter "b-control-em" is not installed.
Adapter "backitup" is up to date.
Adapter "beckhoff" is not installed.
Adapter "benq" is not installed.
Adapter "binance" is not installed.
Adapter "ble" is not installed.
Adapter "bmw" is not installed.
Adapter "bosesoundtouch" is not installed.
Adapter "botvac" is not installed.
Adapter "bring" is not installed.
Adapter "broadlink2" is up to date.
Adapter "bsblan" is not installed.
Adapter "bshb" is up to date.
Adapter "chromecast" is up to date.
Adapter "cloud" is up to date.
Adapter "comfoair" is not installed.
Adapter "contactid" is not installed.
Adapter "coronavirus-statistics" is not installed.
Adapter "countdown" is not installed.
Adapter "cul" is not installed.
Adapter "daikin" is not installed.
Adapter "daswetter" is up to date.
Adapter "deconz" is up to date.
Adapter "denon" is not installed.
Adapter "devices" is up to date.
Adapter "digitalstrom" is not installed.
Adapter "discovergy" is not installed.
Adapter "discovery" is up to date.
Adapter "doorio" is not installed.
Adapter "ds18b20" is not installed.
Adapter "dwd" is not installed.
Adapter "ebus" is not installed.
Adapter "ecovacs-deebot" is not installed.
Adapter "egigeozone" is not installed.
Adapter "ekey" is not installed.
Adapter "email" is not installed.
Adapter "emby" is not installed.
Adapter "energymanager" is not installed.
Adapter "enet" is not installed.
Adapter "epson_stylus_px830" is not installed.
Adapter "exchangerates" is not installed.
Adapter "fakeroku" is not installed.
Adapter "fb-checkpresence" is not installed.
Adapter "feiertage" is not installed.
Adapter "fhem" is not installed.
Adapter "find-my-iphone" is not installed.
Adapter "firetv" is not installed.
Adapter "flot" is up to date.
Adapter "foobar2000" is not installed.
Adapter "fritzbox" is not installed.
Adapter "fritzdect" is not installed.
Adapter "fronius" is not installed.
Adapter "fullcalendar" is not installed.
Adapter "fullybrowser" is not installed.
Adapter "g-homa" is not installed.
Adapter "geofency" is not installed.
Adapter "gruenbeck" is not installed.
Adapter "habpanel" is not installed.
Adapter "haier" is not installed.
Adapter "ham" is up to date.
Adapter "ham-wemo" is not installed.
Adapter "harmony" is not installed.
Adapter "heatingcontrol" is not installed.
Adapter "heytech" is not installed.
Adapter "hid" is not installed.
Adapter "history" is up to date.
Adapter "hm-rega" is up to date.
Adapter "hm-rpc" is up to date.
Adapter "hmip" is not installed.
Adapter "homeconnect" is not installed.
Adapter "homee" is not installed.
Adapter "homepilot" is not installed.
Adapter "hp-ilo" is not installed.
Adapter "hs100" is not installed.
Adapter "hue" is not installed.
Adapter "hue-extended" is not installed.
Adapter "ical" is not installed.
Adapter "icons-addictive-flavour-png" is not installed.
Adapter "icons-fatcow-hosting" is not installed.
Adapter "icons-icons8" is up to date.
Adapter "icons-material-png" is not installed.
Adapter "icons-material-svg" is not installed.
Adapter "icons-mfd-png" is not installed.
Adapter "icons-mfd-svg" is up to date.
Adapter "icons-open-icon-library-png" is not installed.
Adapter "icons-ultimate-png" is not installed.
Adapter "influxdb" is not installed.
Adapter "info" is up to date.
Adapter "innogy-smarthome" is not installed.
Adapter "iogo" is not installed.
Adapter "iot" is up to date.
Adapter "iqontrol" is not installed.
Adapter "javascript" is up to date.
Adapter "jeelink" is not installed.
Adapter "kecontact" is not installed.
Adapter "klf200" is not installed.
Adapter "km200" is not installed.
Adapter "knmi-weather" is not installed.
Adapter "knx" is not installed.
Adapter "kodi" is not installed.
Adapter "kress" is not installed.
Adapter "lametric" is not installed.
Adapter "landroid" is not installed.
Adapter "lcn" is not installed.
Adapter "letrika_comgw" is not installed.
Adapter "lgtv" is not installed.
Adapter "lgtv-rs" is not installed.
Adapter "lgtv11" is not installed.
Adapter "lifx" is not installed.
Adapter "lightify" is not installed.
Adapter "link" is not installed.
Adapter "linkeddevices" is not installed.
Adapter "logparser" is not installed.
Adapter "lovelace" is not installed.
Adapter "loxone" is not installed.
Adapter "luftdaten" is not installed.
Adapter "lupusec" is not installed.
Adapter "luxtronik1" is not installed.
Adapter "material" is not installed.
Adapter "maxcube" is up to date.
Adapter "maxcul" is not installed.
Adapter "mbus" is not installed.
Adapter "mclighting" is not installed.
Adapter "megad" is not installed.
Adapter "megadd" is not installed.
Adapter "megaesp" is not installed.
Adapter "melcloud" is not installed.
Adapter "mercedesme" is up to date.
Adapter "mercury" is not installed.
Adapter "meross" is up to date.
Adapter "meteoalarm" is not installed.
Adapter "midea" is not installed.
Adapter "miele" is not installed.
Adapter "mielecloudservice" is not installed.
Adapter "mihome" is up to date.
Adapter "mihome-lamp" is not installed.
Adapter "mihome-plug" is not installed.
Adapter "mihome-vacuum" is up to date.
Adapter "mikrotik" is not installed.
Adapter "milight" is not installed.
Adapter "milight-smart-light" is not installed.
Adapter "mobile" is up to date.
Adapter "modbus" is up to date.
Adapter "moma" is not installed.
Adapter "mpd" is not installed.
Adapter "mqtt" is up to date.
Adapter "mqtt-client" is up to date.
Adapter "musiccast" is not installed.
Adapter "mysensors" is not installed.
Adapter "nanoleaf-lightpanels" is not installed.
Adapter "nello" is not installed.
Adapter "netatmo" is not installed.
Adapter "nibeuplink" is not installed.
Adapter "nina" is not installed.
Adapter "node-red" is up to date.
Adapter "nuki" is not installed.
Adapter "nuki-extended" is not installed.
Adapter "nut" is not installed.
Adapter "odl" is not installed.
Adapter "oilfox" is not installed.
Adapter "onkyo" is not installed.
Adapter "onvif" is not installed.
Adapter "openhab" is not installed.
Adapter "openligadb" is not installed.
Adapter "openweathermap" is not installed.
Adapter "opi" is not installed.
Adapter "oppoplayer" is not installed.
Adapter "owfs" is not installed.
Adapter "owntracks" is not installed.
Adapter "panasonic-viera" is not installed.
Adapter "parser" is not installed.
Adapter "paw" is not installed.
Adapter "phantomjs" is not installed.
Adapter "pi-hole" is not installed.
Adapter "piface" is not installed.
Adapter "pimatic" is not installed.
Adapter "ping" is up to date.
Adapter "places" is not installed.
Adapter "plex" is not installed.
Adapter "plexconnect" is not installed.
Adapter "pollenflug" is not installed.
Adapter "proxmox" is not installed.
Adapter "proxy" is not installed.
Adapter "pushbullet" is not installed.
Adapter "pushover" is not installed.
Adapter "pushsafer" is not installed.
Adapter "radar2" is up to date.
Adapter "radiohead" is not installed.
Adapter "rflink" is not installed.
Adapter "rickshaw" is not installed.
Adapter "ring" is not installed.
Adapter "robonect" is not installed.
Adapter "roomba" is not installed.
Adapter "rpi2" is up to date.
Adapter "s7" is not installed.
Adapter "samsung" is up to date.
Adapter "sayit" is not installed.
Adapter "sbfspot" is not installed.
Adapter "scenes" is up to date.
Adapter "schoolfree" is not installed.
Adapter "shelly" is up to date.
Adapter "shuttercontrol" is up to date.
Adapter "sia" is not installed.
Adapter "siegenia" is not installed.
Adapter "simple-api" is up to date.
Adapter "smappee" is not installed.
Adapter "smartgarden" is not installed.
Adapter "smartmeter" is not installed.
Adapter "snips" is not installed.
Adapter "snmp" is not installed.
Adapter "socketio" is up to date.
Adapter "solarlog" is not installed.
Adapter "solarviewdatareader" is not installed.
Adapter "solarwetter" is not installed.
Adapter "sonnen" is not installed.
Adapter "sonoff" is not installed.
Adapter "sonos" is not installed.
Adapter "sony-bravia" is not installed.
Adapter "spotify-premium" is not installed.
Adapter "sql" is not installed.
Adapter "squeezebox" is not installed.
Adapter "squeezeboxrpc" is not installed.
Adapter "starline" is not installed.
Adapter "statistics" is not installed.
Adapter "stiebel-isg" is not installed.
Adapter "sunnyportal" is not installed.
Adapter "swiss-weather-api" is not installed.
Adapter "synology" is not installed.
Adapter "systeminfo" is not installed.
Adapter "tahoma" is not installed.
Adapter "tankerkoenig" is not installed.
Adapter "telegram" is up to date.
Adapter "terminal" is up to date.
Adapter "tesla-motors" is not installed.
Adapter "text2command" is up to date.
Adapter "tinker" is not installed.
Adapter "tr-064" is not installed.
Adapter "tradfri" is not installed.
Adapter "trashschedule" is not installed.
Adapter "tunnelbroker-endpoint-updater" is not installed.
Adapter "tuya" is up to date.
Adapter "tvspielfilm" is not installed.
Adapter "unifi" is not installed.
Adapter "upnp" is not installed.
Adapter "vaillant" is not installed.
Adapter "valloxmv" is not installed.
Adapter "vcard" is not installed.
Adapter "velux" is not installed.
Adapter "viessmann" is not installed.
Adapter "virtualpowermeter" is not installed.
Adapter "vis" is up to date.
Adapter "vis-bars" is up to date.
Adapter "vis-canvas-gauges" is not installed.
Adapter "vis-colorpicker" is not installed.
Adapter "vis-fancyswitch" is not installed.
Adapter "vis-google-fonts" is not installed.
Adapter "vis-history" is not installed.
Adapter "vis-hqwidgets" is up to date.
Adapter "vis-icontwo" is not installed.
Adapter "vis-inventwo" is not installed.
Adapter "vis-jqui-mfd" is up to date.
Adapter "vis-justgage" is not installed.
Adapter "vis-keyboard" is not installed.
Adapter "vis-lcars" is not installed.
Adapter "vis-map" is not installed.
Adapter "vis-metro" is up to date.
Adapter "vis-players" is not installed.
Adapter "vis-plumb" is not installed.
Adapter "vis-rgraph" is up to date.
Adapter "vis-timeandweather" is up to date.
Adapter "vis-weather" is up to date.
Adapter "vr200" is not installed.
Adapter "vw-connect" is not installed.
Adapter "weatherunderground" is not installed.
Adapter "web" is up to date.
Adapter "weishaupt-wem" is not installed.
Adapter "wiffi-wz" is not installed.
Adapter "wifilight" is not installed.
Adapter "windows-control" is not installed.
Adapter "wled" is not installed.
Adapter "wm-bus" is not installed.
Adapter "wolf" is not installed.
Adapter "worx" is not installed.
Adapter "xbox" is not installed.
Adapter "xs1" is not installed.
Adapter "yahka" is not installed.
Adapter "yamaha" is not installed.
Adapter "yeelight-2" is not installed.
Adapter "youtube" is not installed.
Adapter "yr" is up to date.
Adapter "zigbee" is up to date.
Adapter "zont" is not installed.
Adapter "zwave" is up to date.
Adapter "zwave2" is not installed.
pi@raspberrypi-master:~ $

[Thomas Braun]

@kiste01
Bitte Konsolenausgaben in CodeTags </> packen.

iobroker list adapters

liefert?

[kiste01]

@Thomas-Braun said in keine Adapterliste nach versuchter Multihost Installation:

iobroker list adapters
system.adapter.admin                   : admin          - v4.1.8
system.adapter.alexa2                  : alexa2         - v3.3.1
system.adapter.backitup                : backitup       - v1.6.7
system.adapter.broadlink2              : broadlink2     - v2.1.5
system.adapter.bshb                    : bshb           - v0.1.10
system.adapter.chromecast              : chromecast     - v2.3.1
system.adapter.cloud                   : cloud          - v3.0.4
system.adapter.daswetter               : daswetter      - v3.0.3
system.adapter.deconz                  : deconz         - v2.0.4
system.adapter.devices                 : devices        - v0.3.13
system.adapter.discovery               : discovery      - v2.3.11
system.adapter.dwd                     : dwd            - v2.4.3
system.adapter.flot                    : flot           - v1.10.2
system.adapter.g-homa                  : g-homa         - v0.4.0
system.adapter.gree_aircon             : gree_aircon    - v0.0.1
system.adapter.ham                     : ham            - v3.0.1
system.adapter.history                 : history        - v1.9.10
system.adapter.hm-rega                 : hm-rega        - v2.6.20
system.adapter.hm-rpc                  : hm-rpc         - v1.14.23
system.adapter.icons-icons8            : icons-icons8   - v0.0.1
system.adapter.icons-mfd-svg           : icons-mfd-svg  - v1.0.2
system.adapter.info                    : info           - v1.7.7
system.adapter.intesishome             : intesishome    - v0.1.2
system.adapter.iot                     : iot            - v1.7.9
system.adapter.javascript              : javascript     - v4.8.1
system.adapter.lovelace                : lovelace       - v0.1.3
system.adapter.maxcube                 : maxcube        - v1.0.2
system.adapter.mercedesme              : mercedesme     - v0.0.21
system.adapter.meross                  : meross         - v1.5.0
system.adapter.mihome                  : mihome         - v1.3.5
system.adapter.mihome-vacuum           : mihome-vacuum  - v2.1.1
system.adapter.mobile                  : mobile         - v1.0.1
system.adapter.modbus                  : modbus         - v3.1.9
system.adapter.mqtt                    : mqtt           - v2.1.9
system.adapter.mqtt-client             : mqtt-client    - v1.3.1
system.adapter.node-red                : node-red       - v2.0.1
system.adapter.ping                    : ping           - v1.4.12
system.adapter.pushover                : pushover       - v1.0.4
system.adapter.radar                   : radar          - v1.2.1
system.adapter.radar2                  : radar2         - v2.0.1
system.adapter.rpi2                    : rpi2           - v1.2.0
system.adapter.samsung                 : samsung        - v0.2.9
system.adapter.scenes                  : scenes         - v2.1.3
system.adapter.shelly                  : shelly         - v4.0.3
system.adapter.shuttercontrol          : shuttercontrol - v0.8.6
system.adapter.simple-api              : simple-api     - v2.4.8
system.adapter.socketio                : socketio       - v3.0.13
system.adapter.sonoff                  : sonoff         - v2.2.2
system.adapter.tankerkoenig            : tankerkoenig   - v2.0.6
system.adapter.telegram                : telegram       - v1.5.9
system.adapter.terminal                : terminal       - v0.1.2
system.adapter.text2command            : text2command   - v2.0.3
system.adapter.tuya                    : tuya           - v3.3.14
system.adapter.vis                     : vis            - v1.3.1
system.adapter.vis-bars                : vis-bars       - v0.1.4
system.adapter.vis-hqwidgets           : vis-hqwidgets  - v1.1.5
system.adapter.vis-jqui-mfd            : vis-jqui-mfd   - v1.0.12
system.adapter.vis-material            : vis-material   - v0.1.3
system.adapter.vis-material-advanced   : vis-material-advanced - v0.8.2
system.adapter.vis-material-webfont    : vis-material-webfont - v0.0.3
system.adapter.vis-materialdesign      : vis-materialdesign - v0.3.19
system.adapter.vis-metro               : vis-metro      - v1.1.2
system.adapter.vis-rgraph              : vis-rgraph     - v0.0.2
system.adapter.vis-timeandweather      : vis-timeandweather - v1.1.7
system.adapter.vis-weather             : vis-weather    - v2.5.2
system.adapter.weatherunderground      : weatherunderground - v3.1.2
system.adapter.web                     : web            - v3.0.13
system.adapter.whatsapp-cmb            : whatsapp-cmb   - v0.1.6
system.adapter.yr                      : yr             - v2.0.3
system.adapter.zigbee                  : zigbee         - v1.2.1
system.adapter.zwave                   : zwave          - v2.0.1

jetzt kann man es besser lesen. Stimmt.

[Homoran]

@kiste01 sagte in keine Adapterliste nach versuchter Multihost Installation:

used repositiory: default

Bitte screenshot von den Haupteinstellungen und Verwahrungsorten

Dann einen Screenshot von der nicht vorhandenen Adapterliste

[Thomas Braun]

@kiste01
Hast du den Versuch mit dem Multihost auch wieder sauber ad acta gelegt?
Soweit ich mich erinnere mit

iobroker multihost disable

Weil mir gerade was ähnliches passiert ist: Hast du in der leeren Adapterliste auch mal ganz nach oben gescrollt?

[kiste01]

@Thomas-Braun said in keine Adapterliste nach versuchter Multihost Installation:

iobroker multihost disable

iobroker multihost disable
No configuration change needed.


Multihost discovery server: disabled
Discovery authentication:   enabled
Objects:                    file on 127.0.0.1
States:                     redis on 127.0.0.1

da ich ja das Backup eingespielt hatte, sollte das eigentlich eh weg sein.

In der Adapterliste kann ich nicht scollen ,,, der Kreis dreht sich

[Homoran]

@kiste01 sagte in keine Adapterliste nach versuchter Multihost Installation:

der Kreis dreht sich

Das ist eine ganz andere Info!

Was steht lm log?
oder in der Browserkonsole?

wieso wird das Repo default genutzt, wenn du latest eingestellt hast?