Skip to content
  • Home
  • Aktuell
  • Tags
  • 0 Ungelesen 0
  • Kategorien
  • Unreplied
  • Beliebt
  • GitHub
  • Docu
  • Hilfe
Skins
  • Light
  • Brite
  • Cerulean
  • Cosmo
  • Flatly
  • Journal
  • Litera
  • Lumen
  • Lux
  • Materia
  • Minty
  • Morph
  • Pulse
  • Sandstone
  • Simplex
  • Sketchy
  • Spacelab
  • United
  • Yeti
  • Zephyr
  • Dark
  • Cyborg
  • Darkly
  • Quartz
  • Slate
  • Solar
  • Superhero
  • Vapor

  • Standard: (Kein Skin)
  • Kein Skin
Einklappen
ioBroker Logo

Community Forum

donate donate
  1. ioBroker Community Home
  2. Deutsch
  3. ioBroker Allgemein
  4. Ble.0 Adapter bremst ganzen IObroker in 2 Min.

NEWS

  • UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?
    apollon77A
    apollon77
    48
    3
    8.9k

  • Monatsrückblick – September 2025
    BluefoxB
    Bluefox
    13
    1
    2.3k

  • Neues Video "KI im Smart Home" - ioBroker plus n8n
    BluefoxB
    Bluefox
    16
    1
    3.4k

Ble.0 Adapter bremst ganzen IObroker in 2 Min.

Geplant Angeheftet Gesperrt Verschoben ioBroker Allgemein
ble adapter
124 Beiträge 12 Kommentatoren 11.3k Aufrufe 11 Watching
  • Älteste zuerst
  • Neuste zuerst
  • Meiste Stimmen
Antworten
  • In einem neuen Thema antworten
Anmelden zum Antworten
Dieses Thema wurde gelöscht. Nur Nutzer mit entsprechenden Rechten können es sehen.
  • Peter.bleP Offline
    Peter.bleP Offline
    Peter.ble
    schrieb am zuletzt editiert von Homoran
    #20

    Danke für eure Hilfe. Hier das /var/log/syslog. Dmesg kann nicht nicht machen, da der ganze Raspberry nicht mehr erreichbar ist und nur ab Start gespeichert wird.
    Wenn ich falsch liege bitte schreiben wie ich vorgehen soll.
    Ab ca 8:15 Uhr habe ich den BLE Adapter gestartet. Das System lief vorher ohne Fehler.
    Ca 8:17 Uhr war der IObroker nicht mehr erreichbar.
    Habe dann den Raspberry neu gestaretet.

    Jul 23 08:14:15 raspberrypi bash[587]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
    Jul 23 08:14:16 raspberrypi kernel: [43100.943995] device wlan0 left promiscuous mode
    Jul 23 08:14:40 raspberrypi kernel: [43125.013973] device wlan0 entered promiscuous mode
    Jul 23 08:14:45 raspberrypi kernel: [43130.901301] device wlan0 left promiscuous mode
    Jul 23 08:15:10 raspberrypi kernel: [43155.134453] device wlan0 entered promiscuous mode
    Jul 23 08:15:15 raspberrypi bash[587]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
    Jul 23 08:15:16 raspberrypi kernel: [43161.018161] device wlan0 left promiscuous mode
    Jul 23 08:15:40 raspberrypi kernel: [43185.114958] device wlan0 entered promiscuous mode
    Jul 23 08:15:46 raspberrypi kernel: [43191.094761] device wlan0 left promiscuous mode
    Jul 23 08:16:03 raspberrypi rngd[398]: stats: bits received from HRNG source: 420064
    Jul 23 08:16:03 raspberrypi rngd[398]: stats: bits sent to kernel pool: 363584
    Jul 23 08:16:03 raspberrypi rngd[398]: stats: entropy added to kernel pool: 363584
    Jul 23 08:16:03 raspberrypi rngd[398]: stats: FIPS 140-2 successes: 21
    Jul 23 08:16:03 raspberrypi rngd[398]: stats: FIPS 140-2 failures: 0
    Jul 23 08:16:03 raspberrypi rngd[398]: stats: FIPS 140-2(2001-10-10) Monobit: 0
    Jul 23 08:16:03 raspberrypi rngd[398]: stats: FIPS 140-2(2001-10-10) Poker: 0
    Jul 23 08:16:03 raspberrypi rngd[398]: stats: FIPS 140-2(2001-10-10) Runs: 0
    Jul 23 08:16:03 raspberrypi rngd[398]: stats: FIPS 140-2(2001-10-10) Long run: 0
    Jul 23 08:16:03 raspberrypi rngd[398]: stats: FIPS 140-2(2001-10-10) Continuous run: 0
    Jul 23 08:16:03 raspberrypi rngd[398]: stats: HRNG source speed: (min=258.493; avg=472.699; max=514.657)Kibits/s
    Jul 23 08:16:03 raspberrypi rngd[398]: stats: FIPS tests speed: (min=11.333; avg=14.298; max=31.268)Mibits/s
    Jul 23 08:16:03 raspberrypi rngd[398]: stats: Lowest ready-buffers level: 2
    Jul 23 08:16:03 raspberrypi rngd[398]: stats: Entropy starvations: 0
    Jul 23 08:16:03 raspberrypi rngd[398]: stats: Time spent starving for entropy: (min=0; avg=0.000; max=0)us
    Jul 23 08:16:10 raspberrypi kernel: [43214.965496] device wlan0 entered promiscuous mode
    Jul 23 08:16:15 raspberrypi bash[587]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
    Jul 23 08:16:16 raspberrypi kernel: [43220.962913] device wlan0 left promiscuous mode
    Jul 23 08:16:19 raspberrypi bash[587]: ================================== > LOG REDIRECT system.adapter.admin.0 => false [system.adapter.admin.0.logging]
    Jul 23 08:16:40 raspberrypi kernel: [43244.956144] device wlan0 entered promiscuous mode
    Jul 23 08:16:46 raspberrypi kernel: [43250.948836] device wlan0 left promiscuous mode
    Jul 23 08:17:01 raspberrypi CRON[14625]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
    Jul 23 08:17:10 raspberrypi kernel: [43274.956590] device wlan0 entered promiscuous mode
    Jul 23 08:17:15 raspberrypi bash[587]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
    Jul 23 08:17:15 raspberrypi kernel: [43280.925821] device wlan0 left promiscuous mode
    Jul 23 08:17:40 raspberrypi kernel: [43305.077096] device wlan0 entered promiscuous mode
    ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@Jul 23 08:17:04 raspberrypi fake-hwclock[116]: Do 23. Jul 06:17:01 UTC 2020
    Jul 23 08:17:04 raspberrypi systemd-fsck[133]: e2fsck 1.44.5 (15-Dec-2018)
    Jul 23 08:17:04 raspberrypi systemd-fsck[133]: rootfs: clean, 242512/941616 files, 1446295/3830528 blocks
    Jul 23 08:17:04 raspberrypi systemd[1]: Started File System Check on Root Device.
    Jul 23 08:17:04 raspberrypi systemd[1]: Starting Remount Root and Kernel File Systems...
    Jul 23 08:17:04 raspberrypi systemd[1]: Started udev Coldplug all Devices.
    Jul 23 08:17:04 raspberrypi systemd[1]: Starting Helper to synchronize boot up for ifupdown...
    

    MOD-Edit: Code in code-tags gesetzt!

    apollon77A 1 Antwort Letzte Antwort
    0
    • Peter.bleP Offline
      Peter.bleP Offline
      Peter.ble
      schrieb am zuletzt editiert von Homoran
      #21

      Habe gerade bemerkt, dass ohne den Radar2 Adapter das System mit laufenden BLE Adapter funktioniert. Benutze Radar2 Adapterversion 1.2.5

      Folgende Einstellungen werden verwendet:

      Verzögerung in Sekunden zwischen Abfragen (>=15): 
      30
      Wie lange (in Minuten) sollte ein Gerät nicht erkannt wird, bevor es markiert als Weg' (>=1): 
      2
      bei Linux: nummer des Bluetooth-Adapters (0 = hci0): 
      0
      
      arp-scan Kommandozeile, muss aber geändert werden falls das 1. Netwerkinterface nicht default ist. 
      -lgq --retry=5 --timeout=400
      Verzögerung in Minuten zwischen den externen Netwerkabfragen (wenn 0 dann ausgeschaltet): 
      60
      Verzögerung in Minuten zwischen Druckerfüllstand-Abfrage (>=100): 
      720
      Verzögerung in Minuten zwischen UWZ-Abfragen 0=UWZ ausgeschaltet: 
      120
      IP-Adressen die bekannt sind und keine 'unknown'-Einträge generieren sollen, mit ',' separiert: 
      1.1.1.1
      BT-Adressen die bekannt sind und keine 'unknown'-Einträge generieren sollen, mit ',' separiert: 
      01:12:23:34:45:56
      Maximum Meldungen in UWZ 0=alle Meldungen zusammen: 
      0
      Benutze langen Warnungstext mit genauer Beschreibung: 
      false
      Liste der konfigurierten Objekte:Bitte Konfiguration speichern!
      

      MOD-Edit: Code in code-tags gesetzt!

      Vielen Dank

      JohGreJ AlCalzoneA 2 Antworten Letzte Antwort
      0
      • Peter.bleP Peter.ble

        Danke für eure Hilfe. Hier das /var/log/syslog. Dmesg kann nicht nicht machen, da der ganze Raspberry nicht mehr erreichbar ist und nur ab Start gespeichert wird.
        Wenn ich falsch liege bitte schreiben wie ich vorgehen soll.
        Ab ca 8:15 Uhr habe ich den BLE Adapter gestartet. Das System lief vorher ohne Fehler.
        Ca 8:17 Uhr war der IObroker nicht mehr erreichbar.
        Habe dann den Raspberry neu gestaretet.

        Jul 23 08:14:15 raspberrypi bash[587]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
        Jul 23 08:14:16 raspberrypi kernel: [43100.943995] device wlan0 left promiscuous mode
        Jul 23 08:14:40 raspberrypi kernel: [43125.013973] device wlan0 entered promiscuous mode
        Jul 23 08:14:45 raspberrypi kernel: [43130.901301] device wlan0 left promiscuous mode
        Jul 23 08:15:10 raspberrypi kernel: [43155.134453] device wlan0 entered promiscuous mode
        Jul 23 08:15:15 raspberrypi bash[587]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
        Jul 23 08:15:16 raspberrypi kernel: [43161.018161] device wlan0 left promiscuous mode
        Jul 23 08:15:40 raspberrypi kernel: [43185.114958] device wlan0 entered promiscuous mode
        Jul 23 08:15:46 raspberrypi kernel: [43191.094761] device wlan0 left promiscuous mode
        Jul 23 08:16:03 raspberrypi rngd[398]: stats: bits received from HRNG source: 420064
        Jul 23 08:16:03 raspberrypi rngd[398]: stats: bits sent to kernel pool: 363584
        Jul 23 08:16:03 raspberrypi rngd[398]: stats: entropy added to kernel pool: 363584
        Jul 23 08:16:03 raspberrypi rngd[398]: stats: FIPS 140-2 successes: 21
        Jul 23 08:16:03 raspberrypi rngd[398]: stats: FIPS 140-2 failures: 0
        Jul 23 08:16:03 raspberrypi rngd[398]: stats: FIPS 140-2(2001-10-10) Monobit: 0
        Jul 23 08:16:03 raspberrypi rngd[398]: stats: FIPS 140-2(2001-10-10) Poker: 0
        Jul 23 08:16:03 raspberrypi rngd[398]: stats: FIPS 140-2(2001-10-10) Runs: 0
        Jul 23 08:16:03 raspberrypi rngd[398]: stats: FIPS 140-2(2001-10-10) Long run: 0
        Jul 23 08:16:03 raspberrypi rngd[398]: stats: FIPS 140-2(2001-10-10) Continuous run: 0
        Jul 23 08:16:03 raspberrypi rngd[398]: stats: HRNG source speed: (min=258.493; avg=472.699; max=514.657)Kibits/s
        Jul 23 08:16:03 raspberrypi rngd[398]: stats: FIPS tests speed: (min=11.333; avg=14.298; max=31.268)Mibits/s
        Jul 23 08:16:03 raspberrypi rngd[398]: stats: Lowest ready-buffers level: 2
        Jul 23 08:16:03 raspberrypi rngd[398]: stats: Entropy starvations: 0
        Jul 23 08:16:03 raspberrypi rngd[398]: stats: Time spent starving for entropy: (min=0; avg=0.000; max=0)us
        Jul 23 08:16:10 raspberrypi kernel: [43214.965496] device wlan0 entered promiscuous mode
        Jul 23 08:16:15 raspberrypi bash[587]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
        Jul 23 08:16:16 raspberrypi kernel: [43220.962913] device wlan0 left promiscuous mode
        Jul 23 08:16:19 raspberrypi bash[587]: ================================== > LOG REDIRECT system.adapter.admin.0 => false [system.adapter.admin.0.logging]
        Jul 23 08:16:40 raspberrypi kernel: [43244.956144] device wlan0 entered promiscuous mode
        Jul 23 08:16:46 raspberrypi kernel: [43250.948836] device wlan0 left promiscuous mode
        Jul 23 08:17:01 raspberrypi CRON[14625]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
        Jul 23 08:17:10 raspberrypi kernel: [43274.956590] device wlan0 entered promiscuous mode
        Jul 23 08:17:15 raspberrypi bash[587]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
        Jul 23 08:17:15 raspberrypi kernel: [43280.925821] device wlan0 left promiscuous mode
        Jul 23 08:17:40 raspberrypi kernel: [43305.077096] device wlan0 entered promiscuous mode
        ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@Jul 23 08:17:04 raspberrypi fake-hwclock[116]: Do 23. Jul 06:17:01 UTC 2020
        Jul 23 08:17:04 raspberrypi systemd-fsck[133]: e2fsck 1.44.5 (15-Dec-2018)
        Jul 23 08:17:04 raspberrypi systemd-fsck[133]: rootfs: clean, 242512/941616 files, 1446295/3830528 blocks
        Jul 23 08:17:04 raspberrypi systemd[1]: Started File System Check on Root Device.
        Jul 23 08:17:04 raspberrypi systemd[1]: Starting Remount Root and Kernel File Systems...
        Jul 23 08:17:04 raspberrypi systemd[1]: Started udev Coldplug all Devices.
        Jul 23 08:17:04 raspberrypi systemd[1]: Starting Helper to synchronize boot up for ifupdown...
        

        MOD-Edit: Code in code-tags gesetzt!

        apollon77A Offline
        apollon77A Offline
        apollon77
        schrieb am zuletzt editiert von
        #22

        @Peter-ble Hey, Also diese "komischen Müll Zeichen" im Syslog bedeuten an sich das dein System gerade gecrasht ist - oder zumindestens ein Teil davon. Das würde auch den Sprung in der uhrzeit erklären weil fake-hwclock die Uhrzeit wieder neu setzt ... und auch der fs check weisst darauf hin.

        Es siehrt aber so aus als ob er nicht komplett rebootet sondern nur ein teil...

        Also kurz: Irgendetwas mag deine Hardware nicht an der Konstellation ... da kann fürchte ich der Adapter nix für

        Beitrag hat geholfen? Votet rechts unten im Beitrag :-) https://paypal.me/Apollon77 / https://github.com/sponsors/Apollon77

        • Debug-Log für Instanz einschalten? Admin -> Instanzen -> Expertenmodus -> Instanz aufklappen - Loglevel ändern
        • Logfiles auf Platte /opt/iobroker/log/… nutzen, Admin schneidet Zeilen ab
        1 Antwort Letzte Antwort
        0
        • Peter.bleP Peter.ble

          Habe gerade bemerkt, dass ohne den Radar2 Adapter das System mit laufenden BLE Adapter funktioniert. Benutze Radar2 Adapterversion 1.2.5

          Folgende Einstellungen werden verwendet:

          Verzögerung in Sekunden zwischen Abfragen (>=15): 
          30
          Wie lange (in Minuten) sollte ein Gerät nicht erkannt wird, bevor es markiert als Weg' (>=1): 
          2
          bei Linux: nummer des Bluetooth-Adapters (0 = hci0): 
          0
          
          arp-scan Kommandozeile, muss aber geändert werden falls das 1. Netwerkinterface nicht default ist. 
          -lgq --retry=5 --timeout=400
          Verzögerung in Minuten zwischen den externen Netwerkabfragen (wenn 0 dann ausgeschaltet): 
          60
          Verzögerung in Minuten zwischen Druckerfüllstand-Abfrage (>=100): 
          720
          Verzögerung in Minuten zwischen UWZ-Abfragen 0=UWZ ausgeschaltet: 
          120
          IP-Adressen die bekannt sind und keine 'unknown'-Einträge generieren sollen, mit ',' separiert: 
          1.1.1.1
          BT-Adressen die bekannt sind und keine 'unknown'-Einträge generieren sollen, mit ',' separiert: 
          01:12:23:34:45:56
          Maximum Meldungen in UWZ 0=alle Meldungen zusammen: 
          0
          Benutze langen Warnungstext mit genauer Beschreibung: 
          false
          Liste der konfigurierten Objekte:Bitte Konfiguration speichern!
          

          MOD-Edit: Code in code-tags gesetzt!

          Vielen Dank

          JohGreJ Offline
          JohGreJ Offline
          JohGre
          schrieb am zuletzt editiert von
          #23

          @Peter-ble sagte in Ble.0 Adapter bremst ganzen IObroker in 2 Min.:

          Habe gerade bemerkt, dass ohne den Radar2 Adapter das System mit laufenden BLE Adapter funktioniert. Benutze Radar2 Adapterversion 1.2.5

          Wie schon geschrieben, bei mir war arp-scan beim radar2 Adapter schuld. Eine deinstallation half hier nachhaltig.

          nuc i5: RaspberryMatic, ioBroker, pi-hole, SQL-Server, OMV-NAS, Influx-DB & Grafana, OpenHab, tasmoadmin

          1 Antwort Letzte Antwort
          0
          • Peter.bleP Peter.ble

            Habe gerade bemerkt, dass ohne den Radar2 Adapter das System mit laufenden BLE Adapter funktioniert. Benutze Radar2 Adapterversion 1.2.5

            Folgende Einstellungen werden verwendet:

            Verzögerung in Sekunden zwischen Abfragen (>=15): 
            30
            Wie lange (in Minuten) sollte ein Gerät nicht erkannt wird, bevor es markiert als Weg' (>=1): 
            2
            bei Linux: nummer des Bluetooth-Adapters (0 = hci0): 
            0
            
            arp-scan Kommandozeile, muss aber geändert werden falls das 1. Netwerkinterface nicht default ist. 
            -lgq --retry=5 --timeout=400
            Verzögerung in Minuten zwischen den externen Netwerkabfragen (wenn 0 dann ausgeschaltet): 
            60
            Verzögerung in Minuten zwischen Druckerfüllstand-Abfrage (>=100): 
            720
            Verzögerung in Minuten zwischen UWZ-Abfragen 0=UWZ ausgeschaltet: 
            120
            IP-Adressen die bekannt sind und keine 'unknown'-Einträge generieren sollen, mit ',' separiert: 
            1.1.1.1
            BT-Adressen die bekannt sind und keine 'unknown'-Einträge generieren sollen, mit ',' separiert: 
            01:12:23:34:45:56
            Maximum Meldungen in UWZ 0=alle Meldungen zusammen: 
            0
            Benutze langen Warnungstext mit genauer Beschreibung: 
            false
            Liste der konfigurierten Objekte:Bitte Konfiguration speichern!
            

            MOD-Edit: Code in code-tags gesetzt!

            Vielen Dank

            AlCalzoneA Offline
            AlCalzoneA Offline
            AlCalzone
            Developer
            schrieb am zuletzt editiert von
            #24

            @Peter-ble sagte in Ble.0 Adapter bremst ganzen IObroker in 2 Min.:

            dass ohne den Radar2 Adapter das System mit laufenden BLE Adapter funktioniert

            Du hast beide gleichzeitig laufen? Wenn beide auf die Bluetooth-Schnittstelle zugreifen, kann das Probleme machen.

            Warum `sudo` böse ist: https://forum.iobroker.net/post/17109

            1 Antwort Letzte Antwort
            0
            • Peter.bleP Offline
              Peter.bleP Offline
              Peter.ble
              schrieb am zuletzt editiert von
              #25

              Habe beide Adapter gleichzeitig laufen.

              1 Antwort Letzte Antwort
              0
              • Peter.bleP Offline
                Peter.bleP Offline
                Peter.ble
                schrieb am zuletzt editiert von
                #26

                Leider zu früh gefreut. Auch ohne Radar2 Adapter friert das System ein. Dauert aber wesentlich länger. :-(

                1 Antwort Letzte Antwort
                0
                • Peter.bleP Offline
                  Peter.bleP Offline
                  Peter.ble
                  schrieb am zuletzt editiert von
                  #27

                  Habe jetzt mit:

                  sudo apt-get remove arp-scan

                  arp-scan deinstalliert.

                  Mal schauen ob es hilft. Melde mich

                  1 Antwort Letzte Antwort
                  0
                  • Peter.bleP Offline
                    Peter.bleP Offline
                    Peter.ble
                    schrieb am zuletzt editiert von
                    #28

                    arp-scan mit dem Befehl sudi remove arp-scan brachte keine besserung.
                    Zudem ist es egal, ob Radar2 laeft oder nicht. Was ich aber herausgefunden habe, wenn sich der Raspberry per Wlan mit dem 5,8Ghz Netz verbindet laeuft es. Wenn er sich mit dem 2,4 Ghz Netz verbindet habe ich sofot schwierigkeiten.
                    Kann mir jemand helfen. Bei wem l'uft die Kombi Rasbpi4 und Wlan2,4ghz und Ble und Radar. Welche Softwarestaende?

                    A 1 Antwort Letzte Antwort
                    0
                    • Peter.bleP Peter.ble

                      arp-scan mit dem Befehl sudi remove arp-scan brachte keine besserung.
                      Zudem ist es egal, ob Radar2 laeft oder nicht. Was ich aber herausgefunden habe, wenn sich der Raspberry per Wlan mit dem 5,8Ghz Netz verbindet laeuft es. Wenn er sich mit dem 2,4 Ghz Netz verbindet habe ich sofot schwierigkeiten.
                      Kann mir jemand helfen. Bei wem l'uft die Kombi Rasbpi4 und Wlan2,4ghz und Ble und Radar. Welche Softwarestaende?

                      A Offline
                      A Offline
                      arnold
                      schrieb am zuletzt editiert von
                      #29

                      @Peter-ble hast du auch zegbee am laufen ?
                      bist du auch von Rpi3 auf Rpi4 umgezogen ?

                      1 Antwort Letzte Antwort
                      0
                      • A Offline
                        A Offline
                        arnold
                        schrieb am zuletzt editiert von Homoran
                        #30

                        meine /var/log/syslog (über winscp )

                        Jul 25 16:58:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                        Jul 25 16:59:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                        Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: bits received from HRNG source: 80064
                        Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: bits sent to kernel pool: 34336
                        Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: entropy added to kernel pool: 34336
                        Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: FIPS 140-2 successes: 4
                        Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: FIPS 140-2 failures: 0
                        Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: FIPS 140-2(2001-10-10) Monobit: 0
                        Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: FIPS 140-2(2001-10-10) Poker: 0
                        Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: FIPS 140-2(2001-10-10) Runs: 0
                        Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: FIPS 140-2(2001-10-10) Long run: 0
                        Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: FIPS 140-2(2001-10-10) Continuous run: 0
                        Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: HRNG source speed: (min=190.938; avg=337.874; max=504.319)Kibits/s
                        Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: FIPS tests speed: (min=11.109; avg=11.998; max=12.345)Mibits/s
                        Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: Lowest ready-buffers level: 2
                        Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: Entropy starvations: 0
                        Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: Time spent starving for entropy: (min=0; avg=0.000; max=0)us
                        Jul 25 17:00:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                        Jul 25 17:01:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                        Jul 25 17:02:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                        Jul 25 17:03:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                        Jul 25 17:04:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                        Jul 25 17:04:30 raspberrypi4-iob systemd[1]: Started Session c3 of user pi.
                        Jul 25 17:05:04 raspberrypi4-iob dhcpcd[403]: wlan0: Router Advertisement from fe80::f2b0:14ff:fe18:2216
                        Jul 25 17:05:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                        Jul 25 17:06:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                        Jul 25 17:07:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                        Jul 25 17:08:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                        Jul 25 17:08:34 raspberrypi4-iob bash[25674]: ================================== > LOG REDIRECT system.adapter.admin.0 => false [system.adapter.admin.0.logging]
                        Jul 25 17:09:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                        Jul 25 17:10:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                        Jul 25 17:11:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                        Jul 25 17:12:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                        

                        MOD-Edit: Code in code-tags gesetzt!

                        Thomas BraunT 1 Antwort Letzte Antwort
                        0
                        • A arnold

                          meine /var/log/syslog (über winscp )

                          Jul 25 16:58:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                          Jul 25 16:59:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                          Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: bits received from HRNG source: 80064
                          Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: bits sent to kernel pool: 34336
                          Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: entropy added to kernel pool: 34336
                          Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: FIPS 140-2 successes: 4
                          Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: FIPS 140-2 failures: 0
                          Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: FIPS 140-2(2001-10-10) Monobit: 0
                          Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: FIPS 140-2(2001-10-10) Poker: 0
                          Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: FIPS 140-2(2001-10-10) Runs: 0
                          Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: FIPS 140-2(2001-10-10) Long run: 0
                          Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: FIPS 140-2(2001-10-10) Continuous run: 0
                          Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: HRNG source speed: (min=190.938; avg=337.874; max=504.319)Kibits/s
                          Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: FIPS tests speed: (min=11.109; avg=11.998; max=12.345)Mibits/s
                          Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: Lowest ready-buffers level: 2
                          Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: Entropy starvations: 0
                          Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: Time spent starving for entropy: (min=0; avg=0.000; max=0)us
                          Jul 25 17:00:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                          Jul 25 17:01:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                          Jul 25 17:02:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                          Jul 25 17:03:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                          Jul 25 17:04:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                          Jul 25 17:04:30 raspberrypi4-iob systemd[1]: Started Session c3 of user pi.
                          Jul 25 17:05:04 raspberrypi4-iob dhcpcd[403]: wlan0: Router Advertisement from fe80::f2b0:14ff:fe18:2216
                          Jul 25 17:05:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                          Jul 25 17:06:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                          Jul 25 17:07:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                          Jul 25 17:08:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                          Jul 25 17:08:34 raspberrypi4-iob bash[25674]: ================================== > LOG REDIRECT system.adapter.admin.0 => false [system.adapter.admin.0.logging]
                          Jul 25 17:09:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                          Jul 25 17:10:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                          Jul 25 17:11:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                          Jul 25 17:12:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                          

                          MOD-Edit: Code in code-tags gesetzt!

                          Thomas BraunT Online
                          Thomas BraunT Online
                          Thomas Braun
                          Most Active
                          schrieb am zuletzt editiert von
                          #31

                          @arnold
                          Bitte in CodeTags setzen </>

                          Linux-Werkzeugkasten:
                          https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                          NodeJS Fixer Skript:
                          https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                          iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                          1 Antwort Letzte Antwort
                          0
                          • A Offline
                            A Offline
                            arnold
                            schrieb am zuletzt editiert von Homoran
                            #32

                            @Thomas-Braun said in Ble.0 Adapter bremst ganzen IObroker in 2 Min.:

                            CodeTags setzen </>
                            <

                            Jul 25 16:58:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                            Jul 25 16:59:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                            Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: bits received from HRNG source: 80064
                            Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: bits sent to kernel pool: 34336
                            Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: entropy added to kernel pool: 34336
                            Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: FIPS 140-2 successes: 4
                            Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: FIPS 140-2 failures: 0
                            Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: FIPS 140-2(2001-10-10) Monobit: 0
                            Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: FIPS 140-2(2001-10-10) Poker: 0
                            Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: FIPS 140-2(2001-10-10) Runs: 0
                            Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: FIPS 140-2(2001-10-10) Long run: 0
                            Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: FIPS 140-2(2001-10-10) Continuous run: 0
                            Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: HRNG source speed: (min=190.938; avg=337.874; max=504.319)Kibits/s
                            Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: FIPS tests speed: (min=11.109; avg=11.998; max=12.345)Mibits/s
                            Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: Lowest ready-buffers level: 2
                            Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: Entropy starvations: 0
                            Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: Time spent starving for entropy: (min=0; avg=0.000; max=0)us
                            Jul 25 17:00:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                            Jul 25 17:01:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                            Jul 25 17:02:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                            Jul 25 17:03:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                            Jul 25 17:04:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                            Jul 25 17:04:30 raspberrypi4-iob systemd[1]: Started Session c3 of user pi.
                            Jul 25 17:05:04 raspberrypi4-iob dhcpcd[403]: wlan0: Router Advertisement from fe80::f2b0:14ff:fe18:2216
                            Jul 25 17:05:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                            Jul 25 17:06:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                            Jul 25 17:07:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                            Jul 25 17:08:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                            Jul 25 17:08:34 raspberrypi4-iob bash[25674]: ================================== > LOG REDIRECT system.adapter.admin.0 => false [system.adapter.admin.0.logging]
                            Jul 25 17:09:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                            Jul 25 17:10:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                            Jul 25 17:11:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                            Jul 25 17:12:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                            

                            MOD-Edit: Code in code-tags gesetzt!

                            Thomas BraunT 1 Antwort Letzte Antwort
                            0
                            • A arnold

                              @Thomas-Braun said in Ble.0 Adapter bremst ganzen IObroker in 2 Min.:

                              CodeTags setzen </>
                              <

                              Jul 25 16:58:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                              Jul 25 16:59:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                              Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: bits received from HRNG source: 80064
                              Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: bits sent to kernel pool: 34336
                              Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: entropy added to kernel pool: 34336
                              Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: FIPS 140-2 successes: 4
                              Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: FIPS 140-2 failures: 0
                              Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: FIPS 140-2(2001-10-10) Monobit: 0
                              Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: FIPS 140-2(2001-10-10) Poker: 0
                              Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: FIPS 140-2(2001-10-10) Runs: 0
                              Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: FIPS 140-2(2001-10-10) Long run: 0
                              Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: FIPS 140-2(2001-10-10) Continuous run: 0
                              Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: HRNG source speed: (min=190.938; avg=337.874; max=504.319)Kibits/s
                              Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: FIPS tests speed: (min=11.109; avg=11.998; max=12.345)Mibits/s
                              Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: Lowest ready-buffers level: 2
                              Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: Entropy starvations: 0
                              Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: Time spent starving for entropy: (min=0; avg=0.000; max=0)us
                              Jul 25 17:00:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                              Jul 25 17:01:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                              Jul 25 17:02:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                              Jul 25 17:03:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                              Jul 25 17:04:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                              Jul 25 17:04:30 raspberrypi4-iob systemd[1]: Started Session c3 of user pi.
                              Jul 25 17:05:04 raspberrypi4-iob dhcpcd[403]: wlan0: Router Advertisement from fe80::f2b0:14ff:fe18:2216
                              Jul 25 17:05:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                              Jul 25 17:06:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                              Jul 25 17:07:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                              Jul 25 17:08:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                              Jul 25 17:08:34 raspberrypi4-iob bash[25674]: ================================== > LOG REDIRECT system.adapter.admin.0 => false [system.adapter.admin.0.logging]
                              Jul 25 17:09:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                              Jul 25 17:10:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                              Jul 25 17:11:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                              Jul 25 17:12:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                              

                              MOD-Edit: Code in code-tags gesetzt!

                              Thomas BraunT Online
                              Thomas BraunT Online
                              Thomas Braun
                              Most Active
                              schrieb am zuletzt editiert von
                              #33

                              @arnold
                              Fast...

                              Text markieren und dann das fünfte Icon in der Icon-Leiste anklicken. Sieht so aus: </>

                              Linux-Werkzeugkasten:
                              https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                              NodeJS Fixer Skript:
                              https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                              iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                              1 Antwort Letzte Antwort
                              0
                              • A Offline
                                A Offline
                                arnold
                                schrieb am zuletzt editiert von
                                #34
                                Jul 25 16:58:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                                Jul 25 16:59:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                                Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: bits received from HRNG source: 80064
                                Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: bits sent to kernel pool: 34336
                                Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: entropy added to kernel pool: 34336
                                Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: FIPS 140-2 successes: 4
                                Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: FIPS 140-2 failures: 0
                                Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: FIPS 140-2(2001-10-10) Monobit: 0
                                Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: FIPS 140-2(2001-10-10) Poker: 0
                                Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: FIPS 140-2(2001-10-10) Runs: 0
                                Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: FIPS 140-2(2001-10-10) Long run: 0
                                Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: FIPS 140-2(2001-10-10) Continuous run: 0
                                Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: HRNG source speed: (min=190.938; avg=337.874; max=504.319)Kibits/s
                                Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: FIPS tests speed: (min=11.109; avg=11.998; max=12.345)Mibits/s
                                Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: Lowest ready-buffers level: 2
                                Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: Entropy starvations: 0
                                Jul 25 16:59:28 raspberrypi4-iob rngd[348]: stats: Time spent starving for entropy: (min=0; avg=0.000; max=0)us
                                Jul 25 17:00:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                                Jul 25 17:01:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                                Jul 25 17:02:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                                Jul 25 17:03:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                                Jul 25 17:04:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                                Jul 25 17:04:30 raspberrypi4-iob systemd[1]: Started Session c3 of user pi.
                                Jul 25 17:05:04 raspberrypi4-iob dhcpcd[403]: wlan0: Router Advertisement from fe80::f2b0:14ff:fe18:2216
                                Jul 25 17:05:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                                Jul 25 17:06:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                                Jul 25 17:07:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                                Jul 25 17:08:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                                Jul 25 17:08:34 raspberrypi4-iob bash[25674]: ================================== > LOG REDIRECT system.adapter.admin.0 => false [system.adapter.admin.0.logging]
                                Jul 25 17:09:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                                Jul 25 17:10:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                                Jul 25 17:11:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                                Jul 25 17:12:19 raspberrypi4-iob bash[25674]: cat: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: Keine Berechtigung
                                
                                
                                1 Antwort Letzte Antwort
                                0
                                • A Offline
                                  A Offline
                                  arnold
                                  schrieb am zuletzt editiert von
                                  #35

                                  wenn ich Ble. 0 starte dann geht meine wlan verbindung in 80 sek von 72Mbit/s auf
                                  1Mbit/s und somit kein Zugriff auf iobroker !!!
                                  Wenn ich Ble.0 Stoppe (rechtzeitig ) geht meine Verbindung wieder auf 72Mbit/s

                                  Thomas BraunT apollon77A 2 Antworten Letzte Antwort
                                  0
                                  • A arnold

                                    wenn ich Ble. 0 starte dann geht meine wlan verbindung in 80 sek von 72Mbit/s auf
                                    1Mbit/s und somit kein Zugriff auf iobroker !!!
                                    Wenn ich Ble.0 Stoppe (rechtzeitig ) geht meine Verbindung wieder auf 72Mbit/s

                                    Thomas BraunT Online
                                    Thomas BraunT Online
                                    Thomas Braun
                                    Most Active
                                    schrieb am zuletzt editiert von
                                    #36

                                    @arnold

                                    uname -a 
                                    who -r
                                    sudo apt update
                                    

                                    Linux-Werkzeugkasten:
                                    https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                                    NodeJS Fixer Skript:
                                    https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                                    iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                                    1 Antwort Letzte Antwort
                                    0
                                    • A Offline
                                      A Offline
                                      arnold
                                      schrieb am zuletzt editiert von
                                      #37
                                      pi@raspberrypi4-iob:~ $ uname -a
                                      Linux raspberrypi4-iob 5.4.51-v7l+ #1327 SMP Thu Jul 23 11:04:39 BST 2020 armv7l GNU/Linux
                                      pi@raspberrypi4-iob:~ $ who -r
                                               Runlevel 5   2020-07-25 16:52
                                      pi@raspberrypi4-iob:~ $ sudo apt update
                                      OK:1 http://raspbian.raspberrypi.org/raspbian buster InRelease
                                      OK:2 http://archive.raspberrypi.org/debian buster InRelease
                                      OK:3 https://deb.nodesource.com/node_10.x buster InRelease
                                      Paketlisten werden gelesen... Fertig
                                      Abhängigkeitsbaum wird aufgebaut.
                                      Statusinformationen werden eingelesen.... Fertig
                                      Aktualisierung für 7 Pakete verfügbar. Führen Sie »apt list --upgradable« aus, um sie anzuzeigen.
                                      pi@raspberrypi4-iob:~ $
                                      
                                      
                                      Thomas BraunT 1 Antwort Letzte Antwort
                                      0
                                      • A arnold
                                        pi@raspberrypi4-iob:~ $ uname -a
                                        Linux raspberrypi4-iob 5.4.51-v7l+ #1327 SMP Thu Jul 23 11:04:39 BST 2020 armv7l GNU/Linux
                                        pi@raspberrypi4-iob:~ $ who -r
                                                 Runlevel 5   2020-07-25 16:52
                                        pi@raspberrypi4-iob:~ $ sudo apt update
                                        OK:1 http://raspbian.raspberrypi.org/raspbian buster InRelease
                                        OK:2 http://archive.raspberrypi.org/debian buster InRelease
                                        OK:3 https://deb.nodesource.com/node_10.x buster InRelease
                                        Paketlisten werden gelesen... Fertig
                                        Abhängigkeitsbaum wird aufgebaut.
                                        Statusinformationen werden eingelesen.... Fertig
                                        Aktualisierung für 7 Pakete verfügbar. Führen Sie »apt list --upgradable« aus, um sie anzuzeigen.
                                        pi@raspberrypi4-iob:~ $
                                        
                                        
                                        Thomas BraunT Online
                                        Thomas BraunT Online
                                        Thomas Braun
                                        Most Active
                                        schrieb am zuletzt editiert von Thomas Braun
                                        #38

                                        @arnold
                                        Lass den Server in Runlevel 3 laufen.

                                        sudo raspi-config
                                        

                                        3 Boot Options
                                        B1 Desktop / CLI
                                        B1 oder B2 (Je nach Vorliebe, ich würde B1 empfehlen)

                                        Linux-Werkzeugkasten:
                                        https://forum.iobroker.net/topic/42952/der-kleine-iobroker-linux-werkzeugkasten
                                        NodeJS Fixer Skript:
                                        https://forum.iobroker.net/topic/68035/iob-node-fix-skript
                                        iob_diag: curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

                                        1 Antwort Letzte Antwort
                                        0
                                        • A Offline
                                          A Offline
                                          arnold
                                          schrieb am zuletzt editiert von
                                          #39

                                          @Thomas-Braun said in Ble.0 Adapter bremst ganzen IObroker in 2 Min.:

                                          Server in Runlevel 3

                                          wie mache ich das --Server in Runlevel 3 laufen ???

                                          Thomas BraunT 1 Antwort Letzte Antwort
                                          0
                                          Antworten
                                          • In einem neuen Thema antworten
                                          Anmelden zum Antworten
                                          • Älteste zuerst
                                          • Neuste zuerst
                                          • Meiste Stimmen


                                          Support us

                                          ioBroker
                                          Community Adapters
                                          Donate
                                          FAQ Cloud / IOT
                                          HowTo: Node.js-Update
                                          HowTo: Backup/Restore
                                          Downloads
                                          BLOG

                                          355

                                          Online

                                          32.5k

                                          Benutzer

                                          81.6k

                                          Themen

                                          1.3m

                                          Beiträge
                                          Community
                                          Impressum | Datenschutz-Bestimmungen | Nutzungsbedingungen | Einwilligungseinstellungen
                                          ioBroker Community 2014-2025
                                          logo
                                          • Anmelden

                                          • Du hast noch kein Konto? Registrieren

                                          • Anmelden oder registrieren, um zu suchen
                                          • Erster Beitrag
                                            Letzter Beitrag
                                          0
                                          • Home
                                          • Aktuell
                                          • Tags
                                          • Ungelesen 0
                                          • Kategorien
                                          • Unreplied
                                          • Beliebt
                                          • GitHub
                                          • Docu
                                          • Hilfe