NEWS
Admin Seite funktioniert nach Admin update nicht mehr
ioBroker Allgemein
35
Beiträge
3
Kommentatoren
2.4k
Aufrufe
3
Watching
-
Und das denke ich mal nicht ;) , weil er so komische Befehle reingeballert hat !
da bin ich Vorsichtig !
@Glasfaser
Mit geb0rkter Vorinstallation funktioniert alles über apt aber auch nicht mehr sauber. -
@Glasfaser
Mit geb0rkter Vorinstallation funktioniert alles über apt aber auch nicht mehr sauber.Dann warten wir mal .... was noch kommt . ;)
ohne Grund wird wohl der Admin nicht mehr aktiv gewesen sein nach dem Update !
-
Hey,
ich habe vorhin mal das neue Admin update gemacht. Dabei ist der Iobroker wohl ausgegangen und ich komme über die ip nicht mehr auf die Admin Seite. Die Vis Seiten funktionieren und Steuern kann ich auch alles normal. Auch der Vis Editor geht noch. Ich habe auch in der Fritzbox geschaut ob mein Pi 3b noch die gleiche IP hat und das hat er. Über Putty komme ich auch drauf und habe auch schon updates gemacht.
Weiß evtl schon jemand woran das liegen kann? Welche Infos braucht ihr evtl noch?
Grüße :)
@Hermanito33 sagte in Admin Seite funktioniert nach Admin update nicht mehr:
mein Pi 3b
Bevor du alles UptoDate machst ... wieviel Instanzen hast du laufen !?
-
cd /opt/iobroker iobroker stop curl -sL https://deb.nodesource.com/setup_12.x | bash - apt install -y nodejs npm rebuildich hoffe du hast es nicht vorher vermurkst !
@Glasfaser ```
Also ich habe das mal durchlaufen lassen. Ich glaube ich habe mein ganzen Iobroker sowieso schon vermurkst mit den ganzen befehlen die ich schon reingehauen habe. Müsste eigentlich mal komplett neu installieren. Aktuell laufen 19 Instanzen, ich habe mir aber nen Raspberry pi 4 mit 4GB bestellt.pi@ioBroker-Pi:~ $ cd /opt/iobroker pi@ioBroker-Pi:/opt/iobroker $ pi@ioBroker-Pi:/opt/iobroker $ iobroker stop pi@ioBroker-Pi:/opt/iobroker $ curl -sL https://deb.nodesource.com/setup_12.x | bash - ## Installing the NodeSource Node.js 12.x repo... ## Populating apt-get cache... + apt-get update Paketlisten werden gelesen... Fertig W: chmod 0700 of directory /var/lib/apt/lists/partial failed - SetupAPTPartialDi rectory (1: Die Operation ist nicht erlaubt) E: Sperrdatei /var/lib/apt/lists/lock konnte nicht geöffnet werden. - open (13: Keine Berechtigung) E: Das Verzeichnis /var/lib/apt/lists/ kann nicht gesperrt werden. W: Problem beim Entfernen (unlink) der Datei /var/cache/apt/pkgcache.bin - Remov eCaches (13: Keine Berechtigung) W: Problem beim Entfernen (unlink) der Datei /var/cache/apt/srcpkgcache.bin - Re moveCaches (13: Keine Berechtigung) Error executing command, exiting pi@ioBroker-Pi:/opt/iobroker $ apt install -y nodejs E: Sperrdatei /var/lib/dpkg/lock konnte nicht geöffnet werden. - open (13: Keine Berechtigung) E: Sperren des Administrationsverzeichnisses (/var/lib/dpkg/) nicht möglich, sin d Sie root? pi@ioBroker-Pi:/opt/iobroker $ npm rebuild > iobroker@2.0.2 install /opt/iobroker/node_modules/iobroker > node lib/checkVersions.js NPM version: 6.14.4 > iobroker@2.0.2 postinstall /opt/iobroker/node_modules/iobroker > node lib/install.js lib/install.js is not being run as part of an installation - skipping... > @abandonware/noble@1.9.2-5 install /opt/iobroker/node_modules/@abandonware/nob le > node-gyp rebuild make: Verzeichnis „/opt/iobroker/node_modules/@abandonware/noble/build“ wird bet reten SOLINK_MODULE(target) Release/obj.target/noble.node COPY Release/noble.node make: Verzeichnis „/opt/iobroker/node_modules/@abandonware/noble/build“ wird ver lassen > @serialport/bindings@2.0.8 install /opt/iobroker/node_modules/@serialport/bind ings > prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild prebuild-install WARN install No prebuilt binaries found (target=12.16.3 runtime =node arch=arm libc= platform=linux) make: Verzeichnis „/opt/iobroker/node_modules/@serialport/bindings/build“ wird b etreten CXX(target) Release/obj.target/bindings/src/serialport.o ../src/serialport.cpp: In function ‘void EIO_AfterGet(uv_work_t*)’: ../src/serialport.cpp:329:96: warning: ‘bool v8::Object::Set(v8::Local<v8::Value >, v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declara tions] an::New<v8::String>("cts").ToLocalChecked(), Nan::New<v8::Boolean>(data->cts)); ^ In file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8-int ernal.h:14:0, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2 7, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h :67, from ../../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:3499:22: note: declared here bool Set(Local<Value> key, Local<Value> value)); ^ /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in d efinition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/serialport.cpp:330:96: warning: ‘bool v8::Object::Set(v8::Local<v8::Value >, v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declara tions] an::New<v8::String>("dsr").ToLocalChecked(), Nan::New<v8::Boolean>(data->dsr)); ^ In file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8-int ernal.h:14:0, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2 7, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h :67, from ../../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:3499:22: note: declared here bool Set(Local<Value> key, Local<Value> value)); ^ /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in d efinition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/serialport.cpp:331:96: warning: ‘bool v8::Object::Set(v8::Local<v8::Value >, v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declara tions] an::New<v8::String>("dcd").ToLocalChecked(), Nan::New<v8::Boolean>(data->dcd)); ^ In file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8-int ernal.h:14:0, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2 7, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h :67, from ../../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:3499:22: note: declared here bool Set(Local<Value> key, Local<Value> value)); ^ /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in d efinition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/serialport.cpp: In function ‘void EIO_AfterGetBaudRate(uv_work_t*)’: ../src/serialport.cpp:378:106: warning: ‘bool v8::Object::Set(v8::Local<v8::Valu e>, v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declar ations] ::String>("baudRate").ToLocalChecked(), Nan::New<v8::Integer>(data->baudRate)); ^ In file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8-int ernal.h:14:0, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2 7, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h :67, from ../../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:3499:22: note: declared here bool Set(Local<Value> key, Local<Value> value)); ^ /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in d efinition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ CXX(target) Release/obj.target/bindings/src/serialport_unix.o CXX(target) Release/obj.target/bindings/src/poller.o CXX(target) Release/obj.target/bindings/src/serialport_linux.o SOLINK_MODULE(target) Release/obj.target/bindings.node COPY Release/bindings.node make: Verzeichnis „/opt/iobroker/node_modules/@serialport/bindings/build“ wird v erlassen > iobroker.javascript@4.5.1 postinstall /opt/iobroker/node_modules/iobroker.java script > node ./install/installTypings.js Installing NodeJS typings... latest @types: 14, installed node: 12 > iobroker.js-controller@2.2.10 preinstall /opt/iobroker/node_modules/iobroker.j s-controller > node lib/preinstallCheck.js NPM version: 6.14.4 > iobroker.js-controller@2.2.10 install /opt/iobroker/node_modules/iobroker.js-c ontroller > node iobroker.js setup first The following notifications happened during sync: - Ignoring Directory "daswetter.admin" because officially not created as meta ob ject. Please remove directory! - Ignoring Directory "habpanel" because officially not created as meta object. P lease remove directory! - Ignoring Directory "habpanel.admin" because officially not created as meta obj ect. Please remove directory! - Ignoring Directory "iogo.admin" because officially not created as meta object. Please remove directory! - Ignoring Directory "kodi" because officially not created as meta object. Pleas e remove directory! - Ignoring Directory "kodi.admin" because officially not created as meta object. Please remove directory! > ws@0.6.5 install /opt/iobroker/node_modules/websocket-stream/node_modules/ws > (node-gyp rebuild 2> builderror.log) || (exit 0) make: Verzeichnis „/opt/iobroker/node_modules/websocket-stream/node_modules/ws/b uild“ wird betreten CXX(target) Release/obj.target/bufferutil/src/bufferutil.o bufferutil.target.mk:111: die Regel für Ziel „Release/obj.target/bufferutil/src/ bufferutil.o“ scheiterte make: Verzeichnis „/opt/iobroker/node_modules/websocket-stream/node_modules/ws/b uild“ wird verlassen > ws@0.7.0 install /opt/iobroker/node_modules/create-stream-server/node_modules/ ws > (node-gyp rebuild 2> builderror.log) || (exit 0) make: Verzeichnis „/opt/iobroker/node_modules/create-stream-server/node_modules/ ws/build“ wird betreten CXX(target) Release/obj.target/bufferutil/src/bufferutil.o bufferutil.target.mk:111: die Regel für Ziel „Release/obj.target/bufferutil/src/ bufferutil.o“ scheiterte make: Verzeichnis „/opt/iobroker/node_modules/create-stream-server/node_modules/ ws/build“ wird verlassen > raw-socket@1.7.0 install /opt/iobroker/node_modules/iobroker.radar2/node_modul es/raw-socket > node-gyp rebuild make: Verzeichnis „/opt/iobroker/node_modules/iobroker.radar2/node_modules/raw-s ocket/build“ wird betreten CXX(target) Release/obj.target/raw/src/raw.o SOLINK_MODULE(target) Release/obj.target/raw.node COPY Release/raw.node make: Verzeichnis „/opt/iobroker/node_modules/iobroker.radar2/node_modules/raw-s ocket/build“ wird verlassen > usb@1.6.1 install /opt/iobroker/node_modules/iobroker.radar2/node_modules/usb > prebuild-install --verbose || node-gyp rebuild prebuild-install info begin Prebuild-install version 5.3.3 prebuild-install info looking for cached prebuild @ /home/iobroker/.npm/_prebuil ds/86d719-usb-v1.6.1-node-v72-linux-arm.tar.gz prebuild-install http request GET https://github.com/tessel/node-usb/releases/do wnload/v1.6.1/usb-v1.6.1-node-v72-linux-arm.tar.gz prebuild-install http 404 https://github.com/tessel/node-usb/releases/download/v 1.6.1/usb-v1.6.1-node-v72-linux-arm.tar.gz prebuild-install WARN install No prebuilt binaries found (target=12.16.3 runtime =node arch=arm libc= platform=linux) make: Verzeichnis „/opt/iobroker/node_modules/iobroker.radar2/node_modules/usb/b uild“ wird betreten CC(target) Release/obj.target/libusb/libusb/libusb/core.o CC(target) Release/obj.target/libusb/libusb/libusb/descriptor.o CC(target) Release/obj.target/libusb/libusb/libusb/hotplug.o CC(target) Release/obj.target/libusb/libusb/libusb/io.o CC(target) Release/obj.target/libusb/libusb/libusb/strerror.o CC(target) Release/obj.target/libusb/libusb/libusb/sync.o CC(target) Release/obj.target/libusb/libusb/libusb/os/poll_posix.o CC(target) Release/obj.target/libusb/libusb/libusb/os/threads_posix.o CC(target) Release/obj.target/libusb/libusb/libusb/os/linux_usbfs.o CC(target) Release/obj.target/libusb/libusb/libusb/os/linux_udev.o AR(target) Release/obj.target/usb.a COPY Release/usb.a CXX(target) Release/obj.target/usb_bindings/src/node_usb.o ../src/node_usb.cc: In function ‘void handleHotplug(std::pair<libusb_device*, li busb_hotplug_event>)’: ../src/node_usb.cc:151:58: warning: ‘v8::Local<v8::Value> Nan::MakeCallback(v8:: Local<v8::Object>, const char*, int, v8::Local<v8::Value>*)’ is deprecated [-Wde precated-declarations] Nan::MakeCallback(Nan::New(hotplugThis), "emit", 2, argv); ^ In file included from ../src/helpers.h:3:0, from ../src/node_usb.h:21, from ../src/node_usb.cc:1: ../node_modules/nan/nan.h:1001:46: note: declared here NAN_DEPRECATED inline v8::Local<v8::Value> MakeCallback( ^~~~~~~~~~~~ CXX(target) Release/obj.target/usb_bindings/src/device.o ../src/device.cc: In static member function ‘static void Req::default_after(uv_w ork_t*)’: ../src/device.cc:237:64: warning: ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Lo cal<v8::Object>, v8::Local<v8::Function>, int, v8::Local<v8::Value>*)’ is deprec ated [-Wdeprecated-declarations] Nan::MakeCallback(device, Nan::New(baton->callback), 1, argv); ^ In file included from ../src/helpers.h:3:0, from ../src/node_usb.h:21, from ../src/device.cc:1: ../node_modules/nan/nan.h:959:46: note: declared here NAN_DEPRECATED inline v8::Local<v8::Value> MakeCallback( ^~~~~~~~~~~~ CXX(target) Release/obj.target/usb_bindings/src/transfer.o ../src/transfer.cc: In function ‘void handleCompletion(Transfer*)’: ../src/transfer.cc:126:72: warning: ‘v8::Local<v8::Value> Nan::MakeCallback(v8:: Local<v8::Object>, v8::Local<v8::Function>, int, v8::Local<v8::Value>*)’ is depr ecated [-Wdeprecated-declarations] Nan::MakeCallback(self->handle(), Nan::New(self->v8callback), 3, argv); ^ In file included from ../src/helpers.h:3:0, from ../src/node_usb.h:21, from ../src/transfer.cc:1: ../node_modules/nan/nan.h:959:46: note: declared here NAN_DEPRECATED inline v8::Local<v8::Value> MakeCallback( ^~~~~~~~~~~~ SOLINK_MODULE(target) Release/obj.target/usb_bindings.node COPY Release/usb_bindings.node make: Verzeichnis „/opt/iobroker/node_modules/iobroker.radar2/node_modules/usb/b uild“ wird verlassen > @abandonware/noble@1.9.2-5 install /opt/iobroker/node_modules/iobroker.radar2/ node_modules/@abandonware/noble > node-gyp rebuild make: Verzeichnis „/opt/iobroker/node_modules/iobroker.radar2/node_modules/@aban donware/noble/build“ wird betreten SOLINK_MODULE(target) Release/obj.target/noble.node COPY Release/noble.node make: Verzeichnis „/opt/iobroker/node_modules/iobroker.radar2/node_modules/@aban donware/noble/build“ wird verlassen > raw-socket@1.7.0 install /opt/iobroker/node_modules/iobroker.radar2/node_modul es/raw-socket > node-gyp rebuild make: Verzeichnis „/opt/iobroker/node_modules/iobroker.radar2/node_modules/raw-s ocket/build“ wird betreten CXX(target) Release/obj.target/raw/src/raw.o SOLINK_MODULE(target) Release/obj.target/raw.node COPY Release/raw.node make: Verzeichnis „/opt/iobroker/node_modules/iobroker.radar2/node_modules/raw-s ocket/build“ wird verlassen > node-bluetooth@1.2.6 install /opt/iobroker/node_modules/iobroker.radar2/node_m odules/node-bluetooth > node-gyp configure build make: Verzeichnis „/opt/iobroker/node_modules/iobroker.radar2/node_modules/node- bluetooth/build“ wird betreten CXX(target) Release/obj.target/BluetoothSerialPort/src/linux/BluetoothSerialPo rt.o ../src/linux/BluetoothSerialPort.cc:18:14: error: variable or field ‘InitAll’ de clared void void InitAll(Handle<Object> exports) { ^~~~~~ ../src/linux/BluetoothSerialPort.cc:18:14: error: ‘Handle’ was not declared in t his scope ../src/linux/BluetoothSerialPort.cc:18:27: error: expected primary-expression be fore ‘>’ token void InitAll(Handle<Object> exports) { ^ ../src/linux/BluetoothSerialPort.cc:18:29: error: ‘exports’ was not declared in this scope void InitAll(Handle<Object> exports) { ^~~~~~~ In file included from ../src/linux/BluetoothSerialPort.cc:12:0: ../src/linux/BluetoothSerialPort.cc:23:34: error: ‘InitAll’ was not declared in this scope NODE_MODULE(BluetoothSerialPort, InitAll) ^ /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:608:36: note: in defi nition of macro ‘NODE_MODULE_X’ (node::addon_register_func) (regfunc), \ ^~~~~~~ ../src/linux/BluetoothSerialPort.cc:23:1: note: in expansion of macro ‘NODE_MODU LE’ NODE_MODULE(BluetoothSerialPort, InitAll) ^~~~~~~~~~~ BluetoothSerialPort.target.mk:115: die Regel für Ziel „Release/obj.target/Blueto othSerialPort/src/linux/BluetoothSerialPort.o“ scheiterte make: *** [Release/obj.target/BluetoothSerialPort/src/linux/BluetoothSerialPort. o] Fehler 1 make: Verzeichnis „/opt/iobroker/node_modules/iobroker.radar2/node_modules/node- bluetooth/build“ wird verlassen gyp ERR! build error gyp ERR! stack Error: `make` failed with exit code: 2 gyp ERR! stack at ChildProcess.onExit (/usr/local/lib/node_modules/npm/node_ modules/node-gyp/lib/build.js:194:23) gyp ERR! stack at ChildProcess.emit (events.js:310:20) gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_proces s.js:275:12) gyp ERR! System Linux 4.19.66-v7+ gyp ERR! command "/usr/local/bin/node" "/usr/local/lib/node_modules/npm/node_mod ules/node-gyp/bin/node-gyp.js" "configure" "build" gyp ERR! cwd /opt/iobroker/node_modules/iobroker.radar2/node_modules/node-blueto oth gyp ERR! node -v v12.16.3 gyp ERR! node-gyp -v v5.1.0 gyp ERR! not ok npm ERR! code ELIFECYCLE npm ERR! errno 1 npm ERR! node-bluetooth@1.2.6 install: `node-gyp configure build` npm ERR! Exit status 1 npm ERR! npm ERR! Failed at the node-bluetooth@1.2.6 install script. npm ERR! This is probably not a problem with npm. There is likely additional log ging output above. npm ERR! A complete log of this run can be found in: npm ERR! /home/iobroker/.npm/_logs/2020-05-15T19_59_05_978Z-debug.log -
@Glasfaser ```
Also ich habe das mal durchlaufen lassen. Ich glaube ich habe mein ganzen Iobroker sowieso schon vermurkst mit den ganzen befehlen die ich schon reingehauen habe. Müsste eigentlich mal komplett neu installieren. Aktuell laufen 19 Instanzen, ich habe mir aber nen Raspberry pi 4 mit 4GB bestellt.pi@ioBroker-Pi:~ $ cd /opt/iobroker pi@ioBroker-Pi:/opt/iobroker $ pi@ioBroker-Pi:/opt/iobroker $ iobroker stop pi@ioBroker-Pi:/opt/iobroker $ curl -sL https://deb.nodesource.com/setup_12.x | bash - ## Installing the NodeSource Node.js 12.x repo... ## Populating apt-get cache... + apt-get update Paketlisten werden gelesen... Fertig W: chmod 0700 of directory /var/lib/apt/lists/partial failed - SetupAPTPartialDi rectory (1: Die Operation ist nicht erlaubt) E: Sperrdatei /var/lib/apt/lists/lock konnte nicht geöffnet werden. - open (13: Keine Berechtigung) E: Das Verzeichnis /var/lib/apt/lists/ kann nicht gesperrt werden. W: Problem beim Entfernen (unlink) der Datei /var/cache/apt/pkgcache.bin - Remov eCaches (13: Keine Berechtigung) W: Problem beim Entfernen (unlink) der Datei /var/cache/apt/srcpkgcache.bin - Re moveCaches (13: Keine Berechtigung) Error executing command, exiting pi@ioBroker-Pi:/opt/iobroker $ apt install -y nodejs E: Sperrdatei /var/lib/dpkg/lock konnte nicht geöffnet werden. - open (13: Keine Berechtigung) E: Sperren des Administrationsverzeichnisses (/var/lib/dpkg/) nicht möglich, sin d Sie root? pi@ioBroker-Pi:/opt/iobroker $ npm rebuild > iobroker@2.0.2 install /opt/iobroker/node_modules/iobroker > node lib/checkVersions.js NPM version: 6.14.4 > iobroker@2.0.2 postinstall /opt/iobroker/node_modules/iobroker > node lib/install.js lib/install.js is not being run as part of an installation - skipping... > @abandonware/noble@1.9.2-5 install /opt/iobroker/node_modules/@abandonware/nob le > node-gyp rebuild make: Verzeichnis „/opt/iobroker/node_modules/@abandonware/noble/build“ wird bet reten SOLINK_MODULE(target) Release/obj.target/noble.node COPY Release/noble.node make: Verzeichnis „/opt/iobroker/node_modules/@abandonware/noble/build“ wird ver lassen > @serialport/bindings@2.0.8 install /opt/iobroker/node_modules/@serialport/bind ings > prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild prebuild-install WARN install No prebuilt binaries found (target=12.16.3 runtime =node arch=arm libc= platform=linux) make: Verzeichnis „/opt/iobroker/node_modules/@serialport/bindings/build“ wird b etreten CXX(target) Release/obj.target/bindings/src/serialport.o ../src/serialport.cpp: In function ‘void EIO_AfterGet(uv_work_t*)’: ../src/serialport.cpp:329:96: warning: ‘bool v8::Object::Set(v8::Local<v8::Value >, v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declara tions] an::New<v8::String>("cts").ToLocalChecked(), Nan::New<v8::Boolean>(data->cts)); ^ In file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8-int ernal.h:14:0, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2 7, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h :67, from ../../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:3499:22: note: declared here bool Set(Local<Value> key, Local<Value> value)); ^ /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in d efinition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/serialport.cpp:330:96: warning: ‘bool v8::Object::Set(v8::Local<v8::Value >, v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declara tions] an::New<v8::String>("dsr").ToLocalChecked(), Nan::New<v8::Boolean>(data->dsr)); ^ In file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8-int ernal.h:14:0, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2 7, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h :67, from ../../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:3499:22: note: declared here bool Set(Local<Value> key, Local<Value> value)); ^ /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in d efinition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/serialport.cpp:331:96: warning: ‘bool v8::Object::Set(v8::Local<v8::Value >, v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declara tions] an::New<v8::String>("dcd").ToLocalChecked(), Nan::New<v8::Boolean>(data->dcd)); ^ In file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8-int ernal.h:14:0, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2 7, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h :67, from ../../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:3499:22: note: declared here bool Set(Local<Value> key, Local<Value> value)); ^ /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in d efinition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ ../src/serialport.cpp: In function ‘void EIO_AfterGetBaudRate(uv_work_t*)’: ../src/serialport.cpp:378:106: warning: ‘bool v8::Object::Set(v8::Local<v8::Valu e>, v8::Local<v8::Value>)’ is deprecated: Use maybe version [-Wdeprecated-declar ations] ::String>("baudRate").ToLocalChecked(), Nan::New<v8::Integer>(data->baudRate)); ^ In file included from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8-int ernal.h:14:0, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:2 7, from /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h :67, from ../../../nan/nan.h:54, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8.h:3499:22: note: declared here bool Set(Local<Value> key, Local<Value> value)); ^ /home/iobroker/.cache/node-gyp/12.16.3/include/node/v8config.h:328:3: note: in d efinition of macro ‘V8_DEPRECATED’ declarator __attribute__((deprecated(message))) ^~~~~~~~~~ CXX(target) Release/obj.target/bindings/src/serialport_unix.o CXX(target) Release/obj.target/bindings/src/poller.o CXX(target) Release/obj.target/bindings/src/serialport_linux.o SOLINK_MODULE(target) Release/obj.target/bindings.node COPY Release/bindings.node make: Verzeichnis „/opt/iobroker/node_modules/@serialport/bindings/build“ wird v erlassen > iobroker.javascript@4.5.1 postinstall /opt/iobroker/node_modules/iobroker.java script > node ./install/installTypings.js Installing NodeJS typings... latest @types: 14, installed node: 12 > iobroker.js-controller@2.2.10 preinstall /opt/iobroker/node_modules/iobroker.j s-controller > node lib/preinstallCheck.js NPM version: 6.14.4 > iobroker.js-controller@2.2.10 install /opt/iobroker/node_modules/iobroker.js-c ontroller > node iobroker.js setup first The following notifications happened during sync: - Ignoring Directory "daswetter.admin" because officially not created as meta ob ject. Please remove directory! - Ignoring Directory "habpanel" because officially not created as meta object. P lease remove directory! - Ignoring Directory "habpanel.admin" because officially not created as meta obj ect. Please remove directory! - Ignoring Directory "iogo.admin" because officially not created as meta object. Please remove directory! - Ignoring Directory "kodi" because officially not created as meta object. Pleas e remove directory! - Ignoring Directory "kodi.admin" because officially not created as meta object. Please remove directory! > ws@0.6.5 install /opt/iobroker/node_modules/websocket-stream/node_modules/ws > (node-gyp rebuild 2> builderror.log) || (exit 0) make: Verzeichnis „/opt/iobroker/node_modules/websocket-stream/node_modules/ws/b uild“ wird betreten CXX(target) Release/obj.target/bufferutil/src/bufferutil.o bufferutil.target.mk:111: die Regel für Ziel „Release/obj.target/bufferutil/src/ bufferutil.o“ scheiterte make: Verzeichnis „/opt/iobroker/node_modules/websocket-stream/node_modules/ws/b uild“ wird verlassen > ws@0.7.0 install /opt/iobroker/node_modules/create-stream-server/node_modules/ ws > (node-gyp rebuild 2> builderror.log) || (exit 0) make: Verzeichnis „/opt/iobroker/node_modules/create-stream-server/node_modules/ ws/build“ wird betreten CXX(target) Release/obj.target/bufferutil/src/bufferutil.o bufferutil.target.mk:111: die Regel für Ziel „Release/obj.target/bufferutil/src/ bufferutil.o“ scheiterte make: Verzeichnis „/opt/iobroker/node_modules/create-stream-server/node_modules/ ws/build“ wird verlassen > raw-socket@1.7.0 install /opt/iobroker/node_modules/iobroker.radar2/node_modul es/raw-socket > node-gyp rebuild make: Verzeichnis „/opt/iobroker/node_modules/iobroker.radar2/node_modules/raw-s ocket/build“ wird betreten CXX(target) Release/obj.target/raw/src/raw.o SOLINK_MODULE(target) Release/obj.target/raw.node COPY Release/raw.node make: Verzeichnis „/opt/iobroker/node_modules/iobroker.radar2/node_modules/raw-s ocket/build“ wird verlassen > usb@1.6.1 install /opt/iobroker/node_modules/iobroker.radar2/node_modules/usb > prebuild-install --verbose || node-gyp rebuild prebuild-install info begin Prebuild-install version 5.3.3 prebuild-install info looking for cached prebuild @ /home/iobroker/.npm/_prebuil ds/86d719-usb-v1.6.1-node-v72-linux-arm.tar.gz prebuild-install http request GET https://github.com/tessel/node-usb/releases/do wnload/v1.6.1/usb-v1.6.1-node-v72-linux-arm.tar.gz prebuild-install http 404 https://github.com/tessel/node-usb/releases/download/v 1.6.1/usb-v1.6.1-node-v72-linux-arm.tar.gz prebuild-install WARN install No prebuilt binaries found (target=12.16.3 runtime =node arch=arm libc= platform=linux) make: Verzeichnis „/opt/iobroker/node_modules/iobroker.radar2/node_modules/usb/b uild“ wird betreten CC(target) Release/obj.target/libusb/libusb/libusb/core.o CC(target) Release/obj.target/libusb/libusb/libusb/descriptor.o CC(target) Release/obj.target/libusb/libusb/libusb/hotplug.o CC(target) Release/obj.target/libusb/libusb/libusb/io.o CC(target) Release/obj.target/libusb/libusb/libusb/strerror.o CC(target) Release/obj.target/libusb/libusb/libusb/sync.o CC(target) Release/obj.target/libusb/libusb/libusb/os/poll_posix.o CC(target) Release/obj.target/libusb/libusb/libusb/os/threads_posix.o CC(target) Release/obj.target/libusb/libusb/libusb/os/linux_usbfs.o CC(target) Release/obj.target/libusb/libusb/libusb/os/linux_udev.o AR(target) Release/obj.target/usb.a COPY Release/usb.a CXX(target) Release/obj.target/usb_bindings/src/node_usb.o ../src/node_usb.cc: In function ‘void handleHotplug(std::pair<libusb_device*, li busb_hotplug_event>)’: ../src/node_usb.cc:151:58: warning: ‘v8::Local<v8::Value> Nan::MakeCallback(v8:: Local<v8::Object>, const char*, int, v8::Local<v8::Value>*)’ is deprecated [-Wde precated-declarations] Nan::MakeCallback(Nan::New(hotplugThis), "emit", 2, argv); ^ In file included from ../src/helpers.h:3:0, from ../src/node_usb.h:21, from ../src/node_usb.cc:1: ../node_modules/nan/nan.h:1001:46: note: declared here NAN_DEPRECATED inline v8::Local<v8::Value> MakeCallback( ^~~~~~~~~~~~ CXX(target) Release/obj.target/usb_bindings/src/device.o ../src/device.cc: In static member function ‘static void Req::default_after(uv_w ork_t*)’: ../src/device.cc:237:64: warning: ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Lo cal<v8::Object>, v8::Local<v8::Function>, int, v8::Local<v8::Value>*)’ is deprec ated [-Wdeprecated-declarations] Nan::MakeCallback(device, Nan::New(baton->callback), 1, argv); ^ In file included from ../src/helpers.h:3:0, from ../src/node_usb.h:21, from ../src/device.cc:1: ../node_modules/nan/nan.h:959:46: note: declared here NAN_DEPRECATED inline v8::Local<v8::Value> MakeCallback( ^~~~~~~~~~~~ CXX(target) Release/obj.target/usb_bindings/src/transfer.o ../src/transfer.cc: In function ‘void handleCompletion(Transfer*)’: ../src/transfer.cc:126:72: warning: ‘v8::Local<v8::Value> Nan::MakeCallback(v8:: Local<v8::Object>, v8::Local<v8::Function>, int, v8::Local<v8::Value>*)’ is depr ecated [-Wdeprecated-declarations] Nan::MakeCallback(self->handle(), Nan::New(self->v8callback), 3, argv); ^ In file included from ../src/helpers.h:3:0, from ../src/node_usb.h:21, from ../src/transfer.cc:1: ../node_modules/nan/nan.h:959:46: note: declared here NAN_DEPRECATED inline v8::Local<v8::Value> MakeCallback( ^~~~~~~~~~~~ SOLINK_MODULE(target) Release/obj.target/usb_bindings.node COPY Release/usb_bindings.node make: Verzeichnis „/opt/iobroker/node_modules/iobroker.radar2/node_modules/usb/b uild“ wird verlassen > @abandonware/noble@1.9.2-5 install /opt/iobroker/node_modules/iobroker.radar2/ node_modules/@abandonware/noble > node-gyp rebuild make: Verzeichnis „/opt/iobroker/node_modules/iobroker.radar2/node_modules/@aban donware/noble/build“ wird betreten SOLINK_MODULE(target) Release/obj.target/noble.node COPY Release/noble.node make: Verzeichnis „/opt/iobroker/node_modules/iobroker.radar2/node_modules/@aban donware/noble/build“ wird verlassen > raw-socket@1.7.0 install /opt/iobroker/node_modules/iobroker.radar2/node_modul es/raw-socket > node-gyp rebuild make: Verzeichnis „/opt/iobroker/node_modules/iobroker.radar2/node_modules/raw-s ocket/build“ wird betreten CXX(target) Release/obj.target/raw/src/raw.o SOLINK_MODULE(target) Release/obj.target/raw.node COPY Release/raw.node make: Verzeichnis „/opt/iobroker/node_modules/iobroker.radar2/node_modules/raw-s ocket/build“ wird verlassen > node-bluetooth@1.2.6 install /opt/iobroker/node_modules/iobroker.radar2/node_m odules/node-bluetooth > node-gyp configure build make: Verzeichnis „/opt/iobroker/node_modules/iobroker.radar2/node_modules/node- bluetooth/build“ wird betreten CXX(target) Release/obj.target/BluetoothSerialPort/src/linux/BluetoothSerialPo rt.o ../src/linux/BluetoothSerialPort.cc:18:14: error: variable or field ‘InitAll’ de clared void void InitAll(Handle<Object> exports) { ^~~~~~ ../src/linux/BluetoothSerialPort.cc:18:14: error: ‘Handle’ was not declared in t his scope ../src/linux/BluetoothSerialPort.cc:18:27: error: expected primary-expression be fore ‘>’ token void InitAll(Handle<Object> exports) { ^ ../src/linux/BluetoothSerialPort.cc:18:29: error: ‘exports’ was not declared in this scope void InitAll(Handle<Object> exports) { ^~~~~~~ In file included from ../src/linux/BluetoothSerialPort.cc:12:0: ../src/linux/BluetoothSerialPort.cc:23:34: error: ‘InitAll’ was not declared in this scope NODE_MODULE(BluetoothSerialPort, InitAll) ^ /home/iobroker/.cache/node-gyp/12.16.3/include/node/node.h:608:36: note: in defi nition of macro ‘NODE_MODULE_X’ (node::addon_register_func) (regfunc), \ ^~~~~~~ ../src/linux/BluetoothSerialPort.cc:23:1: note: in expansion of macro ‘NODE_MODU LE’ NODE_MODULE(BluetoothSerialPort, InitAll) ^~~~~~~~~~~ BluetoothSerialPort.target.mk:115: die Regel für Ziel „Release/obj.target/Blueto othSerialPort/src/linux/BluetoothSerialPort.o“ scheiterte make: *** [Release/obj.target/BluetoothSerialPort/src/linux/BluetoothSerialPort. o] Fehler 1 make: Verzeichnis „/opt/iobroker/node_modules/iobroker.radar2/node_modules/node- bluetooth/build“ wird verlassen gyp ERR! build error gyp ERR! stack Error: `make` failed with exit code: 2 gyp ERR! stack at ChildProcess.onExit (/usr/local/lib/node_modules/npm/node_ modules/node-gyp/lib/build.js:194:23) gyp ERR! stack at ChildProcess.emit (events.js:310:20) gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_proces s.js:275:12) gyp ERR! System Linux 4.19.66-v7+ gyp ERR! command "/usr/local/bin/node" "/usr/local/lib/node_modules/npm/node_mod ules/node-gyp/bin/node-gyp.js" "configure" "build" gyp ERR! cwd /opt/iobroker/node_modules/iobroker.radar2/node_modules/node-blueto oth gyp ERR! node -v v12.16.3 gyp ERR! node-gyp -v v5.1.0 gyp ERR! not ok npm ERR! code ELIFECYCLE npm ERR! errno 1 npm ERR! node-bluetooth@1.2.6 install: `node-gyp configure build` npm ERR! Exit status 1 npm ERR! npm ERR! Failed at the node-bluetooth@1.2.6 install script. npm ERR! This is probably not a problem with npm. There is likely additional log ging output above. npm ERR! A complete log of this run can be found in: npm ERR! /home/iobroker/.npm/_logs/2020-05-15T19_59_05_978Z-debug.logsudo apt upgrade -
sudo apt upgradeMüssen die nicht auf der gleichen Version sein?
-
Müssen die nicht auf der gleichen Version sein?
@Hermanito33
Nein. nodejs und node müssen gleich sein:nodejs -v && node -v && npm -vUnd bitte keine Screenshots, sondern Konsolenausgaben in </> CodeTags packen.
-
@Hermanito33
Nein. nodejs und node müssen gleich sein:nodejs -v && node -v && npm -vUnd bitte keine Screenshots, sondern Konsolenausgaben in </> CodeTags packen.
@Thomas-Braun ```
code_textpi@ioBroker-Pi:/opt/iobroker $ nodejs -v && node -v && npm -v v10.20.1 v12.16.3 6.14.4 -
@Thomas-Braun ```
code_textpi@ioBroker-Pi:/opt/iobroker $ nodejs -v && node -v && npm -v v10.20.1 v12.16.3 6.14.4@Hermanito33
Falsch installiert.which nodejs which node which npm -
@Hermanito33
Falsch installiert.which nodejs which node which npm@Thomas-Braun ```
pi@ioBroker-Pi:/opt/iobroker $ which nodejs /usr/bin/nodejs pi@ioBroker-Pi:/opt/iobroker $ which node /usr/local/bin/node pi@ioBroker-Pi:/opt/iobroker $ which npm /usr/local/bin/npm pi@ioBroker-Pi:/opt/iobroker $ -
@Thomas-Braun ```
pi@ioBroker-Pi:/opt/iobroker $ which nodejs /usr/bin/nodejs pi@ioBroker-Pi:/opt/iobroker $ which node /usr/local/bin/node pi@ioBroker-Pi:/opt/iobroker $ which npm /usr/local/bin/npm pi@ioBroker-Pi:/opt/iobroker $Ojehh .... :sunglasses:
Synology 918+ 16GB - ioBroker in Docker v9 , VISO auf Trekstor Primebook C13 13,3" , Hikvision Domkameras mit Surveillance Station .. CCU RaspberryMatic in Synology VM .. Zigbee CC2538+CC2592 .. Sonoff .. KNX .. Modbus ..
-
Ojehh .... :sunglasses:
-
@Glasfaser Dachte ich mir fast :D
Da hast du aber alles quer !!!
-
@Thomas-Braun ```
pi@ioBroker-Pi:/opt/iobroker $ which nodejs /usr/bin/nodejs pi@ioBroker-Pi:/opt/iobroker $ which node /usr/local/bin/node pi@ioBroker-Pi:/opt/iobroker $ which npm /usr/local/bin/npm pi@ioBroker-Pi:/opt/iobroker $@Hermanito33
Wie schafft ihr das eigentlich immer eine Installation so zu vermurksen?
Wo steht die Anleitung so im Netz?sudo rm /usr/local/bin/node sudo rm /usr/local/bin/npm curl -sL https://deb.nodesource.com/setup_12.x | sudo -E bash - sudo apt upgrade sudo apt install nodejs --reinstall -
@Hermanito33
Wie schafft ihr das eigentlich immer eine Installation so zu vermurksen?
Wo steht die Anleitung so im Netz?sudo rm /usr/local/bin/node sudo rm /usr/local/bin/npm curl -sL https://deb.nodesource.com/setup_12.x | sudo -E bash - sudo apt upgrade sudo apt install nodejs --reinstall@Thomas-Braun ```
So... Weiß auch nicht wie ich das hinbekommen habe....pi@ioBroker-Pi:/opt/iobroker $ sudo rm /usr/local/bin/node pi@ioBroker-Pi:/opt/iobroker $ sudo rm /usr/local/bin/npm pi@ioBroker-Pi:/opt/iobroker $ curl -sL https://deb.nodesource.com/setup_12.x | sudo -E bash - ## Installing the NodeSource Node.js 12.x repo... ## Populating apt-get cache... + apt-get update OK:1 http://archive.raspberrypi.org/debian stretch InRelease OK:2 http://raspbian.raspberrypi.org/raspbian stretch InRelease OK:3 https://deb.nodesource.com/node_10.x stretch InRelease Paketlisten werden gelesen... Fertig ## Confirming "stretch" is supported... + curl -sLf -o /dev/null 'https://deb.nodesource.com/node_12.x/dists/stretch/Release' ## Adding the NodeSource signing key to your keyring... + curl -s https://deb.nodesource.com/gpgkey/nodesource.gpg.key | apt-key add - OK ## Creating apt sources list file for the NodeSource Node.js 12.x repo... + echo 'deb https://deb.nodesource.com/node_12.x stretch main' > /etc/apt/sources.list.d/nodesource.list + echo 'deb-src https://deb.nodesource.com/node_12.x stretch main' >> /etc/apt/sources.list.d/nodesource.list ## Running `apt-get update` for you... + apt-get update OK:1 http://archive.raspberrypi.org/debian stretch InRelease OK:2 http://raspbian.raspberrypi.org/raspbian stretch InRelease Holen:3 https://deb.nodesource.com/node_12.x stretch InRelease [4.585 B] Holen:4 https://deb.nodesource.com/node_12.x stretch/main armhf Packages [775 B] Es wurden 5.360 B in 1 s geholt (3.784 B/s). Paketlisten werden gelesen... Fertig ## Run `sudo apt-get install -y nodejs` to install Node.js 12.x and npm ## You may also need development tools to build native addons: sudo apt-get install gcc g++ make ## To install the Yarn package manager, run: curl -sL https://dl.yarnpkg.com/debian/pubkey.gpg | sudo apt-key add - echo "deb https://dl.yarnpkg.com/debian/ stable main" | sudo tee /etc/apt/sources.list.d/yarn.list sudo apt-get update && sudo apt-get install yarn pi@ioBroker-Pi:/opt/iobroker $ sudo apt upgrade Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig Paketaktualisierung (Upgrade) wird berechnet... Fertig Die folgenden Pakete werden aktualisiert (Upgrade): nodejs 1 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert. Es müssen 15,9 MB an Archiven heruntergeladen werden. Nach dieser Operation werden 5.960 kB Plattenplatz zusätzlich benutzt. Möchten Sie fortfahren? [J/n] j Holen:1 https://deb.nodesource.com/node_12.x stretch/main armhf nodejs armhf 12.16.3-1nodesource1 [15,9 MB] Es wurden 15,9 MB in 4 s geholt (3.855 kB/s). Lese Changelogs... Fertig (Lese Datenbank ... 41744 Dateien und Verzeichnisse sind derzeit installiert.) Vorbereitung zum Entpacken von .../nodejs_12.16.3-1nodesource1_armhf.deb ... Detected old npm client, removing... Entpacken von nodejs (12.16.3-1nodesource1) über (10.20.1-1nodesource1) ... nodejs (12.16.3-1nodesource1) wird eingerichtet ... Trigger für man-db (2.7.6.1-2) werden verarbeitet ... pi@ioBroker-Pi:/opt/iobroker $ -
@Thomas-Braun ```
So... Weiß auch nicht wie ich das hinbekommen habe....pi@ioBroker-Pi:/opt/iobroker $ sudo rm /usr/local/bin/node pi@ioBroker-Pi:/opt/iobroker $ sudo rm /usr/local/bin/npm pi@ioBroker-Pi:/opt/iobroker $ curl -sL https://deb.nodesource.com/setup_12.x | sudo -E bash - ## Installing the NodeSource Node.js 12.x repo... ## Populating apt-get cache... + apt-get update OK:1 http://archive.raspberrypi.org/debian stretch InRelease OK:2 http://raspbian.raspberrypi.org/raspbian stretch InRelease OK:3 https://deb.nodesource.com/node_10.x stretch InRelease Paketlisten werden gelesen... Fertig ## Confirming "stretch" is supported... + curl -sLf -o /dev/null 'https://deb.nodesource.com/node_12.x/dists/stretch/Release' ## Adding the NodeSource signing key to your keyring... + curl -s https://deb.nodesource.com/gpgkey/nodesource.gpg.key | apt-key add - OK ## Creating apt sources list file for the NodeSource Node.js 12.x repo... + echo 'deb https://deb.nodesource.com/node_12.x stretch main' > /etc/apt/sources.list.d/nodesource.list + echo 'deb-src https://deb.nodesource.com/node_12.x stretch main' >> /etc/apt/sources.list.d/nodesource.list ## Running `apt-get update` for you... + apt-get update OK:1 http://archive.raspberrypi.org/debian stretch InRelease OK:2 http://raspbian.raspberrypi.org/raspbian stretch InRelease Holen:3 https://deb.nodesource.com/node_12.x stretch InRelease [4.585 B] Holen:4 https://deb.nodesource.com/node_12.x stretch/main armhf Packages [775 B] Es wurden 5.360 B in 1 s geholt (3.784 B/s). Paketlisten werden gelesen... Fertig ## Run `sudo apt-get install -y nodejs` to install Node.js 12.x and npm ## You may also need development tools to build native addons: sudo apt-get install gcc g++ make ## To install the Yarn package manager, run: curl -sL https://dl.yarnpkg.com/debian/pubkey.gpg | sudo apt-key add - echo "deb https://dl.yarnpkg.com/debian/ stable main" | sudo tee /etc/apt/sources.list.d/yarn.list sudo apt-get update && sudo apt-get install yarn pi@ioBroker-Pi:/opt/iobroker $ sudo apt upgrade Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig Paketaktualisierung (Upgrade) wird berechnet... Fertig Die folgenden Pakete werden aktualisiert (Upgrade): nodejs 1 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert. Es müssen 15,9 MB an Archiven heruntergeladen werden. Nach dieser Operation werden 5.960 kB Plattenplatz zusätzlich benutzt. Möchten Sie fortfahren? [J/n] j Holen:1 https://deb.nodesource.com/node_12.x stretch/main armhf nodejs armhf 12.16.3-1nodesource1 [15,9 MB] Es wurden 15,9 MB in 4 s geholt (3.855 kB/s). Lese Changelogs... Fertig (Lese Datenbank ... 41744 Dateien und Verzeichnisse sind derzeit installiert.) Vorbereitung zum Entpacken von .../nodejs_12.16.3-1nodesource1_armhf.deb ... Detected old npm client, removing... Entpacken von nodejs (12.16.3-1nodesource1) über (10.20.1-1nodesource1) ... nodejs (12.16.3-1nodesource1) wird eingerichtet ... Trigger für man-db (2.7.6.1-2) werden verarbeitet ... pi@ioBroker-Pi:/opt/iobroker $nodejs -v && node -v && npm -v -
nodejs -v && node -v && npm -v@Thomas-Braun ```
code_textpi@ioBroker-Pi:/opt/iobroker $ nodejs -v && node -v && npm -v v12.16.3 -bash: /usr/local/bin/node: Datei oder Verzeichnis nicht gefunden pi@ioBroker-Pi:/opt/iobroker $ -
@Thomas-Braun ```
code_textpi@ioBroker-Pi:/opt/iobroker $ nodejs -v && node -v && npm -v v12.16.3 -bash: /usr/local/bin/node: Datei oder Verzeichnis nicht gefunden pi@ioBroker-Pi:/opt/iobroker $@Hermanito33 Log dich mal aus und wieder ein. Oder startet die Kiste durch. Wie du Lust hast.
-
@Hermanito33 Log dich mal aus und wieder ein. Oder startet die Kiste durch. Wie du Lust hast.
@Thomas-Braun ```
Das sieht ganz gut aus :)pi@ioBroker-Pi:~ $ nodejs -v && node -v && npm -v v12.16.3 v12.16.3 6.14.4 pi@ioBroker-Pi:~ $ -
@Thomas-Braun ```
Das sieht ganz gut aus :)pi@ioBroker-Pi:~ $ nodejs -v && node -v && npm -v v12.16.3 v12.16.3 6.14.4 pi@ioBroker-Pi:~ $cd /opt/iobroker npm rebuild
766
Online32.5k
Benutzer81.7k
Themen1.3m
Beiträge