NEWS
⁹Iobroker 8081 nicht erreichbar Raspbian Buster
-
@OliverIO
Das habe ich gesehen und es geupdatet.pi@raspberrypi:~ $ sudo -H npm install -g npm@6 npm WARN npm npm does not support Node.js v10.15.2 npm WARN npm You should probably upgrade to a newer version of node as we npm WARN npm can't make any promises that npm will work with this version. npm WARN npm Supported releases of Node.js are the latest release of 4, 6, 7, 8, 9. npm WARN npm You can find the latest version at https://nodejs.org/ /usr/local/bin/npm -> /usr/local/lib/node_modules/npm/bin/npm-cli.js /usr/local/bin/npx -> /usr/local/lib/node_modules/npm/bin/npx-cli.js + npm@6.13.1 added 430 packages from 849 contributors in 49.768s pi@raspberrypi:~ $ npm -v 6.13.1
-
@Justus-Jonas node sollte auf v.10.17.0 upgedatet werden
-
@Homoran
Habe ich eigentlich vorher alles gelöscht.
Und zwar damit
sudo apt-get --purge remove nodesudo apt-get --purge remove nodejssudo apt-get autoremovesudo reboot -
@BBTown
Wie? Apt Update sagt alles up to date -
@Justus-Jonas und die Fehlermeldung deines Logs sagt, dass dein node-js für die installierte npm Version nicht aktuell genug ist, und die v10.17 ist die aktuelle 10er Version ... und nun??
-
@Justus-Jonas
Der nodejs curl mit anschließendem nodejs install sollte 10.17 installieren.Du scheinst auf ein falsches Repo zuzugreifen. Evtl. Von einer anderen Installation
-
@BBTown
Ja habe ich gelesen. Da steht aber das es Version 6,7,8,9 sein soll. 10 wird anscheint überhaupt nicht unterstützt
Wie mach ich das Update.
Danke -
@Homoran
Habe den Pi vor 2 Tagen aufgesetzt. Da kann eigentlich keine andere Installation drauf sein. Hmm? Wie verfahren? -
@Justus-Jonas sagte in ⁹Iobroker 8081 nicht erreichbar Raspbian Buster:
Da kann eigentlich keine andere Installation drauf sein
@Justus-Jonas sagte in ⁹Iobroker 8081 nicht erreichbar Raspbian Buster:
Und einen Logitech Media Server.
-
@Homoran
Der arbeitet eigentlich mit Pearl. Aber klar möglich ist es. Also nochmal aufsetzen und erst ioBroker und dann Logitech Media Server? Oder vertragen die sich überhaupt nicht? -
@BBTown
Ich habe nun auf verschieden wegen versucht zu update. Aber ich bekomme anschließend 10.15 angezeigt. Hast du evtl. eine Hilfestellung wie ich es auf die 10.17 bekomme? -
@Justus-Jonas hier ist eine Anleitung
-
@BBTown
Danke habe es nun hinbekommen. Bekomme nun folgende Versionen zurück:pi@raspberrypi:/opt/iobroker $ node -v v12.13.1 pi@raspberrypi:/opt/iobroker $ nodejs -v v10.17.0 pi@raspberrypi:/opt/iobroker $ npm -v 6.12.1
Wie bekomme ich nun ioBroker dauber vom System um es sauber neu zu installieren
-
@Justus-Jonas sagte in ⁹Iobroker 8081 nicht erreichbar Raspbian Buster:
habe es nun hinbekommen.
Nein, hast du nicht.
Du hast zwei nodejs Installationen parallel!
Einmal v12 und einmal v10Das geht schief
-
So hat sich erledigt. Habe die SD-Karte neu geflasht und den ioBroker zuerst installiert. Nun klappt es. Muss mich nun wahrscheinlich mit dem Logitech Media Server rum schlagen aber mal schauen.
Vielen Dank. Super Hilfe und vor allem sehr schnell
-
(Thread ist Treffer bei Suche nach "main: line 272: return:")
Ich hänge mich mal ran, da es bei mir trotz Neuinstall nicht funzt. Die Install läuft durch, wirft einige Warnings.
Auffällig ist nur diese letzte Zeile:
main: line 272: return: 192.168.137.200: numeric argument requiredIMHO geht das Binding an das Netzwerk-Interface schief. Hierzu vielleicht 'ne Info zu meinem Setup:
Raspi2, via LAN an einer Win10-Kiste (ohne Switch), die Win10 hat connectionsharing auf ihrem WLAN und routet für den Pi. Win legt dabei 192.168.137.1 auf eth0, deshalb musste ich die cmdline.txt anpassen:... rootwait ip=192.168.137.200::192.168.137.1:255.255.255.0::eth0:off
Nachfolgend die Console während der Installation. Die Warnings habe ich gekürzt.
pi@raspberrypi:~ $ df -h Filesystem Size Used Avail Use% Mounted on /dev/root 7.2G 1.5G 5.4G 22% / devtmpfs 459M 0 459M 0% /dev tmpfs 464M 0 464M 0% /dev/shm tmpfs 464M 6.2M 457M 2% /run tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs 464M 0 464M 0% /sys/fs/cgroup /dev/mmcblk0p1 253M 52M 201M 21% /boot tmpfs 93M 0 93M 0% /run/user/1000 pi@raspberrypi:~ $ node -v v10.17.0 pi@raspberrypi:~ $ nodejs -v v10.17.0 pi@raspberrypi:~ $ npm -v 6.11.3 pi@raspberrypi:~ $ curl -sL https://iobroker.net/install.sh | bash - ========================================================================== Welcome to the ioBroker installer! Installer version: 2019-11-10 You might need to enter your password a couple of times. ========================================================================== ========================================================================== Installing prerequisites (1/4) ========================================================================== Hit:1 http://raspbian.raspberrypi.org/raspbian buster InRelease Hit:2 http://archive.raspberrypi.org/debian buster InRelease Hit:3 https://deb.nodesource.com/node_10.x buster InRelease Reading package lists... Done Changing npm registry to https://registry.npmjs.org Installed acl Installed git Installed python-dev ========================================================================== Creating ioBroker user and directory (2/4) ========================================================================== User iobroker created Created /etc/sudoers.d/iobroker Directory /opt/iobroker created ========================================================================== Installing ioBroker (3/4) ========================================================================== In file included from ../src/main.cpp:3: ../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../nan/nan.h:2298:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ ....snap.... /home/pi/.cache/node-gyp/10.17.0/include/node/v8.h: In instantiation of ‘void v8::PersistentBase<T>::SetWeak(P*, typename v8::WeakCallbackInfo<P>::Callback, v8::WeakCallbackType) [with P = Nan::ObjectWrap; T = v8::Object; typename v8::WeakCallbackInfo<P>::Callback = void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)]’: ../../nan/nan_object_wrap.h:65:61: required from here /home/pi/.cache/node-gyp/10.17.0/include/node/v8.h:9502:16: warning: cast between incompatible function types from ‘v8::WeakCallbackInfo<Nan::ObjectWrap>::Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<Nan::ObjectWrap>&)’} to ‘Callback’ {aka ‘void (*)(const v8::WeakCallbackInfo<void>&)’} [-Wcast-function-type] ========================================================================== Finalizing installation (4/4) ========================================================================== Enabling autostart... Created symlink /etc/systemd/system/multi-user.target.wants/iobroker.service → /lib/systemd/system/iobroker.service. Autostart enabled! Fixing directory permissions... main: line 272: return: 192.168.137.200: numeric argument required ========================================================================== ioBroker was installed successfully Open http://:8081 in a browser and start configuring! ========================================================================== You need to re-login before doing anything else on the console!
Wer kann helfen?