NEWS
Инсталляция под Linux
-
Подскажите, как починить?
После пропадания питания вкладка "драйвера" пустая. `
Исправилось?Что говорит?
cd /opt/iobroker iobroker list instances
-
Исправилось?
Что говорит?
cd /opt/iobroker iobroker list instances ```` `
не исправилось
root@zvmubn:/opt/iobroker# iobroker list instances system.adapter.admin.0 : admin - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.web.0 : web - enabled, port: 8082, bind: 0.0.0.0, run as: admin system.adapter.vis.0 : vis - enabled system.adapter.s7.0 : s7 - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets - enabled system.adapter.vis-lcars.0 : vis-lcars - enabled system.adapter.vis-metro.0 : vis-metro - enabled system.adapter.javascript.0 : javascript - enabled system.adapter.history.0 : history - enabled system.adapter.rickshaw.0 : rickshaw - enabled system.adapter.vis-colorpicker.0 : vis-colorpicker - enabled system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png - enabled system.adapter.vis-bars.0 : vis-bars - enabled system.adapter.vis-plumb.0 : vis-plumb - enabled root@zvmubn:/opt/iobroker#
-
А на
cd /opt/iobroker iobroker update
?
-
А на
cd /opt/iobroker iobroker update
? `
root@zvmubn:/opt/iobroker# iobroker update update done Adapter "zwave" : 0.1.0 Adapter "yr" : 0.1.7 Adapter "web" : 0.4.3 , installed 0.4.3 Adapter "vis-plumb" : 0.1.5 , installed 0.1.5 Adapter "vis-metro" : 0.1.7 , installed 0.1.7 Adapter "vis-lcars" : 0.1.6 , installed 0.1.6 Adapter "vis-hqwidgets" : 0.1.0 , installed 0.1.0 Adapter "vis-colorpicker": 0.1.0 , installed 0.1.0 Adapter "vis-bars" : 0.0.3 , installed 0.0.3 Adapter "vis" : 0.6.13 , installed 0.6.12 [Updateable] Adapter "sonos" : 0.1.6 Adapter "rickshaw" : 0.2.2 , installed 0.2.2 Adapter "pushover" : 0.1.1 Adapter "pushbullet" : 0.0.6 Adapter "owfs" : 0.0.2 Adapter "onkyo" : 0.1.9 Adapter "socketio" : 0.4.5 Adapter "simple-api" : 0.1.1 Adapter "scenes" : 0.1.2 Adapter "sayit" : 0.3.11 Adapter "s7" : 0.1.8 , installed 0.1.8 Adapter "ping" : 0.1.4 Adapter "node-red" : 0.3.5 Adapter "mqtt" : 0.2.9 Adapter "megad" : 0.1.1 Adapter "knx" : 0.0.1 Controller "js-controller" : 0.7.10 , installed 0.7.7 [Updateable] Adapter "javascript" : 0.5.5 , installed 0.5.4 [Updateable] Adapter "icons-ultimate-png": 0.1.0 Adapter "icons-open-icon-library-png": 0.1.1 Adapter "icons-mfd-svg" : 0.1.0 Adapter "icons-mfd-png" : 0.1.0 Adapter "icons-material-svg": 0.1.0 Adapter "icons-material-png": 0.1.0 Adapter "icons-addictive-flavour-png": 0.1.0 , installed 0.1.0 Adapter "ical" : 1.1.1 Adapter "hmm" : 0.1.1 Adapter "hue" : 0.4.3 Adapter "hm-rpc" : 0.5.2 Adapter "hm-rega" : 0.2.2 Adapter "history" : 0.1.3 , installed 0.1.3 Adapter "harmony" : 0.5.2 Adapter "example" : 0.1.1 , installed 0.1.1 Adapter "fritzbox" : 0.2.1 Adapter "flot" : 0.1.1 Adapter "email" : 0.1.2 Adapter "dwd" : 0.1.10 Adapter "cul" : 0.0.4 Adapter "b-control-em" : 0.1.1 Adapter "artnet" : 0.0.3 Adapter "admin" : 0.5.8 , installed 0.5.8 root@zvmubn:/opt/iobroker#
-
Была ошибка. Починил в 0.7.10 `
Почему то некоторые (точнее почти все) адаптеры имеет статус "undefined".Скрин прилагаю.
Лог работы iobroker:
!
host-bananapi 2015-08-23 15:56:01 info Update repository "default" under "conf/sources-dist.json" host-bananapi 2015-08-23 15:42:22 warn warning: Looks like there is no internet. host-bananapi 2015-08-23 15:42:17 info Update repository "default" under "conf/sources-dist.json" host-bananapi 2015-08-23 14:43:43 warn warning: Looks like there is no internet. host-bananapi 2015-08-23 14:43:37 info Update repository "default" under "conf/sources-dist.json" host-bananapi 2015-08-23 14:28:56 warn warning: Looks like there is no internet. host-bananapi 2015-08-23 14:28:50 info Update repository "default" under "conf/sources-dist.json" host-bananapi 2015-08-23 14:27:33 warn warning: Looks like there is no internet. host-bananapi 2015-08-23 14:27:27 info Update repository "default" under "conf/sources-dist.json" host-bananapi 2015-08-23 14:21:49 warn warning: Looks like there is no internet. host-bananapi 2015-08-23 14:21:43 info Update repository "default" under "conf/sources-dist.json" host-bananapi 2015-08-23 14:19:11 warn warning: Looks like there is no internet. host-bananapi 2015-08-23 14:19:06 info Update repository "default" under "conf/sources-dist.json" admin-0 2015-08-23 14:14:48 info received all objects admin-0 2015-08-23 14:14:48 info received all states admin-0 2015-08-23 14:14:48 info Use link "http://localhost:8081" to configure. admin-0 2015-08-23 14:14:48 info http server listening on port 8081 admin-0 2015-08-23 14:14:48 info requesting all objects admin-0 2015-08-23 14:14:48 info requesting all states admin-0 2015-08-23 14:14:48 info starting. Version 0.5.8 in /opt/iobroker/node_modules/iobroker.admin host-bananapi 2015-08-23 14:14:38 info instance system.adapter.admin.0 started with pid 2384 host-bananapi 2015-08-23 14:14:38 info starting 1 instance host-bananapi 2015-08-23 14:14:38 info 1 instance found host-bananapi 2015-08-23 14:14:38 info InMemoryDB connected inMem-objects 2015-08-23 14:14:38 info listening on port 9001 inMem-states 2015-08-23 14:14:38 info listening on port 9000 host-bananapi 2015-08-23 14:14:38 info ip addresses: 192.168.69.20 fe80::17:5ff:fe01:d974 host-bananapi 2015-08-23 14:14:38 info hostname: bananapi host-bananapi 2015-08-23 14:14:38 info Copyright (c) 2014-2015 bluefox, hobbyquaker host-bananapi 2015-08-23 14:14:38 info ioBroker.js-controller version 0.7.10 js-controller starting host-bananapi 2015-08-23 14:13:29 info received SIGTERM host-bananapi 2015-08-23 14:13:29 info terminated host-bananapi 2015-08-23 14:13:27 info instance system.adapter.admin.0 terminated with code 0 (OK) admin-0 2015-08-23 14:13:26 info terminating admin-0 2015-08-23 14:13:26 info terminating http server on port 8081 host-bananapi 2015-08-23 14:13:26 info stopInstance system.adapter.admin.0 killing pid 3053 host-bananapi 2015-08-23 14:13:26 info stopInstance system.adapter.admin.0 host-bananapi 2015-08-23 14:13:26 info received SIGTERM host-bananapi 2015-08-23 14:11:38 warn warning: Looks like there is no internet. host-bananapi 2015-08-23 14:11:31 info Update repository "default" under "conf/sources-dist.json" admin-0 2015-08-23 14:09:44 info received all states admin-0 2015-08-23 14:09:44 info received all objects admin-0 2015-08-23 14:09:44 info Use link "http://localhost:8081" to configure. admin-0 2015-08-23 14:09:44 info http server listening on port 8081 admin-0 2015-08-23 14:09:44 info requesting all objects admin-0 2015-08-23 14:09:44 info requesting all states admin-0 2015-08-23 14:09:43 info starting. Version 0.5.8 in /opt/iobroker/node_modules/iobroker.admin host-bananapi 2015-08-23 14:09:33 info instance system.adapter.admin.0 started with pid 3053 host-bananapi 2015-08-23 14:09:33 info starting 1 instance host-bananapi 2015-08-23 14:09:33 info 1 instance found host-bananapi 2015-08-23 14:09:33 info InMemoryDB connected inMem-objects 2015-08-23 14:09:33 info listening on port 9001 inMem-states 2015-08-23 14:09:33 info listening on port 9000 host-bananapi 2015-08-23 14:09:33 info ip addresses: 192.168.69.20 fe80::17:5ff:fe01:d974 host-bananapi 2015-08-23 14:09:33 info hostname: bananapi host-bananapi 2015-08-23 14:09:32 info Copyright (c) 2014-2015 bluefox, hobbyquaker !
50_pic_44.jpg
50_pic_43.jpg -
А где undefined?
-
Теперь почему-то вылетает Node-Red
`node-red-0 2015-08-24 04:14:18 info node-red exited with 1 node-red-0 2015-08-24 04:14:18 debug at Error (native) node-red-0 2015-08-24 04:14:18 debug 24 Aug 04:14:18 - Error: ENOENT, open '/opt/iobroker/opt/iobroker/log/iobroker.log.2015-08-24' node-red-0 2015-08-24 04:14:18 debug 24 Aug 04:14:18 - [red] Uncaught Exception: node-red-0 2015-08-24 04:14:18 debug 24 Aug 04:14:18 - [info] /opt/iobroker/iobroker-data/node-red/ node-red-0 2015-08-24 04:14:18 debug 24 Aug 04:14:18 - [info] in the directory: node-red-0 2015-08-24 04:14:18 debug 24 Aug 04:14:18 - [info] npm install node-red-0 2015-08-24 04:14:18 debug 24 Aug 04:14:18 - [info] To install any of these missing modules, run: node-red-0 2015-08-24 04:14:18 debug 24 Aug 04:14:18 - [info] - serial-port (provided by npm module node-red-node-serialport) node-red-0 2015-08-24 04:14:18 debug 24 Aug 04:14:18 - [info] Waiting for missing types to be registered: node-red-0 2015-08-24 04:14:18 debug 24 Aug 04:14:18 - [info] Starting flows node-red-0 2015-08-24 04:14:18 debug 24 Aug 04:14:18 - [info] Server now running at http://127.0.0.1:1880/ node-red-0 2015-08-24 04:14:18 debug 24 Aug 04:14:18 - [info] Flows file : /opt/iobroker/iobroker-data/node-red/flows.json node-red-0 2015-08-24 04:14:18 debug 24 Aug 04:14:18 - [info] User directory : /opt/iobroker/iobroker-data/node-red/ node-red-0 2015-08-24 04:14:18 debug 24 Aug 04:14:18 - [info] Settings file : /opt/iobroker/iobroker-data/node-red/settings.js`[/red]
-
Спасибо с ioBroker.js-controller 0.7.11 всё опять заработало.
-
BlueFox, подскажи пожалуйста, почему сервер не может получить сведения об обновлениях?
Скрин лога прилагаю.
Хотя интернет есть, все сайты пингуются, в том числе гитхаб…
50_pic_45.jpg -
BlueFox, подскажи пожалуйста, почему сервер не может получить сведения об обновлениях?
Скрин лога прилагаю.
Хотя интернет есть, все сайты пингуются, в том числе гитхаб… `
Что пишет, если ты в консоли вызываешьiobroker update
?
-
Спасибо за обновление драйвера Mega-D!
А сейчас процесс установки на Debian Ubuntu (amd64) чемто отличается от приведенный на первой странице?
Дохожу до
/opt/iobroker# npm install iobroker
А в ответ сразу:
npm WARN cannot run in wd iobroker@0.5.6 node lib/setup.js (wd=/opt/iobroker/node_modules/iobroker)
iobroker@0.5.6 node_modules/iobroker
└── yargs@1.2.6 (minimist@0.1.0)
И дальше тишина …
Одинаково и в Debian 0.8.2 и Ubuntu 14.04
Можно как-то обновить инструкцию...
-
Попробуй: sudo npm install iobroker
4867_skript.jpg -
Попробуй: sudo npm install iobroker `
Я все запускал от root-а.Все оказалось очень просто…
Установка node из репозитория.
chmod 777 /opt/iobroker
и ссылка на "node" с помощью команды "sudo ln -s /usr/bin/nodejs /usr/bin/node"
После этого
npm install iobroker
Прошла как по маслу...
Спасибо.
-
Надо внести в инструкцию:
` > Firts check if node.js is installed. You can do it with commandnode -v
.If you got an answer, you can continue with the installation.
If not. Try to install node.js with
apt-get install nodejs
.Sometimes node.js has not installed the soft link. If you see outputs with
/usr/bin/nodejs -v
, following can help:ln -s /usr/bin/nodejs /usr/bin/node
` -
Подскажите, как починить?
вкладка "драйвера" пустая.
upd:
вкладка "сервера" тоже пустая.
А в настройках все штатно: `
Вот при каждой попытке обновления js-controller происходит такая штука. Приходится заново руками js-controller устанавливать. Может у меня чего-то не так установилось изначально или строки какой-нить не хватает? -
Подскажите, как починить?
вкладка "драйвера" пустая.
upd:
вкладка "сервера" тоже пустая.
А в настройках все штатно:
Вот при ****каждой**** попытке обновления js-controller происходит такая штука. Приходится заново руками js-controller устанавливать. Может у меня чего-то не так установилось изначально или строки какой-нить не хватает?
Попробуй поиграться с правами на папку iobroker. Мне помогло вроде… -
Сегодня "пал смертью храбрых" хард на неттопе где крутился iobroker, вагон бедов
Отсель вопрос как быстро натянуть назад iobroker, ставил в первые версии, всё руками и исходников, что изменилось
Сори ,что спрашиваю не перелопатив ветки и вики.
-
ioBroker ставится 4мя командами:
sudo mkdir /opt/iobroker cd /opt/iobroker sudo chmod 777 . sudo npm install iobroker
-
Поменял хард, накатил debian 8.2.0, node, ставлю iobroker и получаю вагон варнингов и ошибок
Может чего не установилось или забыл поставить, прошлый раз ноду собирал из сырцов, сейчас водрузил с репо
! ````
root@SmartHome:/opt/iobroker# npm install iobrokeriobroker@0.5.6 install /opt/node_modules/iobroker
node lib/setup.js
! npm install iobroker.js-controller --production --prefix /opt
npm WARN engine hawk@3.1.0: wanted: {"node":">=0.10.32"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine hoek@2.16.3: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine boom@2.10.1: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine cryptiles@2.0.5: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
In file included from ../src/validation.cc:15:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/validation/src/validation.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error:make
failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/node_modules/iobroker.js-controller/node_modules/socket.io/node_modules/engine.io/node_modules/ws/node_modules/utf-8-validate
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.DebianIn file included from ../src/bufferutil.cc:16:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error:make
failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/node_modules/iobroker.js-controller/node_modules/socket.io/node_modules/engine.io/node_modules/ws/node_modules/bufferutil
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing utf-8-validate@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.DebianIn file included from ../src/validation.cc:15:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/validation/src/validation.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error:make
failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/node_modules/utf-8-validate
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing bufferutil@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.DebianIn file included from ../src/bufferutil.cc:16:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error:make
failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/node_modules/bufferutil
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing utf-8-validate@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debiannpm WARN optional dep failed, continuing bufferutil@1.2.1
npm install iobroker.admin --production --prefix /opt
npm WARN engine hawk@3.1.0: wanted: {"node":">=0.10.32"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine boom@2.10.1: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine hoek@2.16.3: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine cryptiles@2.0.5: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
In file included from ../src/validation.cc:15:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/validation/src/validation.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error:make
failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/node_modules/iobroker.admin/node_modules/socket.io/node_modules/engine.io/node_modules/ws/node_modules/utf-8-validate
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.DebianIn file included from ../src/bufferutil.cc:16:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error:make
failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/node_modules/iobroker.admin/node_modules/socket.io/node_modules/engine.io/node_modules/ws/node_modules/bufferutil
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing utf-8-validate@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.DebianIn file included from ../src/validation.cc:15:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/validation/src/validation.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error:make
failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/node_modules/iobroker.admin/node_modules/socket.io/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/node_modules/utf-8-validate
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing bufferutil@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.DebianIn file included from ../src/bufferutil.cc:16:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error:make
failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/node_modules/iobroker.admin/node_modules/socket.io/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/node_modules/bufferutil
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing utf-8-validate@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debiannpm WARN optional dep failed, continuing bufferutil@1.2.1
Non-critical error: EISDIR, illegal operation on a directory '/opt/node_modules/iobroker/lib/../../../iobroker'
iobroker@0.5.6 ../node_modules/iobroker
└── yargs@1.2.6 (minimist@0.1.0)
root@SmartHome:/opt/iobroker#! ````
-
При помощи буна,гугла и какой-то матери я его поставил.
8294_zwite_log.txt