Homematic IP (Beschleunigungssensor): Kein Datenpunkt

derrapf

Hallo

Habe heute mein erstes Homematic IP Gerät (Beschleunigungssensor) eingebunden und deshalb in iobroker eine neue Adapterinstanz angelegt.

Im Log findet sich Folgendes.

Im Log steht ich soll das hier bitte dem Entwickler schicken ;-)

hm-rpc.2	2019-01-07 01:05:33.480	warn	Send this info to developer: {"type":"meta","meta":{"adapter":"hm-rpc","type":"paramsetDescription"},"common":{},"native":{"MOTION":{"MIN":false,"OPERATIONS":5,"MAX":true,"FLAGS":1,"ID":"MOTION","TYP
hm-rpc.2	2019-01-07 01:05:33.480	warn	Send this info to developer: _id: "hm-rpc.meta.VALUES.HmIP-SAM.ACCELERATION_TRANSCEIVER.1"
hm-rpc.2	2019-01-07 01:05:33.429	info	xmlrpc -> getParamsetDescription ["000F18A98C92BD:1","VALUES"]
hm-rpc.2	2019-01-07 01:05:33.381	warn	Send this info to developer: {"type":"meta","meta":{"adapter":"hm-rpc","type":"paramsetDescription"},"common":{},"native":{"CONFIG_PENDING":{"MIN":false,"OPERATIONS":5,"MAX":true,"FLAGS":9,"ID":"CONF
hm-rpc.2	2019-01-07 01:05:33.380	warn	Send this info to developer: _id: "hm-rpc.meta.VALUES.HmIP-SAM.MAINTENANCE.1"
hm-rpc.2	2019-01-07 01:05:33.080	info	xmlrpc -> getParamsetDescription ["000F18A98C92BD:0","VALUES"]
hm-rpc.2	2019-01-07 01:05:32.895	info	xmlrpc <- newDevices 6
hm-rpc.2	2019-01-07 01:05:32.683	info	xmlrpc -> 0 devices
hm-rpc.2	2019-01-07 01:05:32.676	info	xmlrpc <- listDevices ["hm-rpc.2"]
hm-rpc.2	2019-01-07 01:05:32.446	info	Connected
hm-rpc.2	2019-01-07 01:05:32.362	info	xmlrpc client is trying to connect to 192.168.111.160:2010/ with ["http://192.168.111.176:2010","hm-rpc.2"]
hm-rpc.2	2019-01-07 01:05:32.362	info	xmlrpc server is trying to listen on 192.168.111.176:2010
hm-rpc.2	2019-01-07 01:05:32.203	info	starting. Version 1.8.3 in /opt/iobroker/node_modules/iobroker.hm-rpc, node: v8.14.0
hm-rpc.2	2019-01-07 01:05:32.060	info	States connected to redis: 127.0.0.1:6379

Ausserdem werden die Ämderungen nicht an iobroker gemeldet, bzw. ich sehe sie nicht:

Man sieht nirgend die Meldung wie sie in der CCU steht ("Bewegung erkannt/senkrecht"). Es gibt nur den Datenpunkt Motion.

Version von hm-rpc ist 1.8.3, Node ist v8.14.0, Nodejs ist v8.14.0

Gruss Ralf

foxriver76

Bitte mal die send this Info to developer Zeilen aus dem Log auf der Platte oder per log herunterladen kopieren, da sonst angeschnitten.

maloross

Ich nutze diesen Sensor auch, der Datenpunkt Motion ist der, der die Bewegung meldet (true/false); waagerecht/senkrecht wird nur in der CCU angezeigt.

derrapf

Hallo

Anbei ein Auszg aus dem Logfile

2019-01-07 01:05:32.060  - [32minfo[39m: hm-rpc.2 States connected to redis: 127.0.0.1:6379
2019-01-07 01:05:32.203  - [32minfo[39m: hm-rpc.2 starting. Version 1.8.3 in /opt/iobroker/node_modules/iobroker.hm-rpc, node: v8.14.0
2019-01-07 01:05:32.362  - [32minfo[39m: hm-rpc.2 xmlrpc server is trying to listen on 192.168.111.176:2010
2019-01-07 01:05:32.362  - [32minfo[39m: hm-rpc.2 xmlrpc client is trying to connect to 192.168.111.160:2010/ with ["http://192.168.111.176:2010","hm-rpc.2"]
2019-01-07 01:05:32.446  - [32minfo[39m: hm-rpc.2 Connected
2019-01-07 01:05:32.676  - [32minfo[39m: hm-rpc.2 xmlrpc <- listDevices ["hm-rpc.2"]
2019-01-07 01:05:32.683  - [32minfo[39m: hm-rpc.2 xmlrpc -> 0 devices
2019-01-07 01:05:32.895  - [32minfo[39m: hm-rpc.2 xmlrpc <- newDevices 6
2019-01-07 01:05:33.080  - [32minfo[39m: hm-rpc.2 xmlrpc -> getParamsetDescription ["000F18A98C92BD:0","VALUES"]
2019-01-07 01:05:33.380  - [33mwarn[39m: hm-rpc.2 Send this info to developer: _id: "hm-rpc.meta.VALUES.HmIP-SAM.MAINTENANCE.1"
2019-01-07 01:05:33.381  - [33mwarn[39m: hm-rpc.2 Send this info to developer: {"type":"meta","meta":{"adapter":"hm-rpc","type":"paramsetDescription"},"common":{},"native":{"CONFIG_PENDING":{"MIN":false,"OPERATIONS":5,"MAX":true,"FLAGS":9,"ID":"CONFIG_PENDING","TYPE":"BOOL","DEFAULT":false},"DUTY_CYCLE":{"MIN":false,"OPERATIONS":5,"MAX":true,"FLAGS":1,"ID":"DUTY_CYCLE","TYPE":"BOOL","DEFAULT":false},"LOW_BAT":{"MIN":false,"OPERATIONS":5,"MAX":true,"FLAGS":9,"ID":"LOW_BAT","TYPE":"BOOL","DEFAULT":false},"UNREACH":{"MIN":false,"OPERATIONS":5,"MAX":true,"FLAGS":25,"ID":"UNREACH","TYPE":"BOOL","DEFAULT":false},"RSSI_DEVICE":{"MIN":-128,"OPERATIONS":5,"MAX":127,"FLAGS":1,"ID":"RSSI_DEVICE","TYPE":"INTEGER","DEFAULT":0},"SENSOR_ERROR":{"MIN":false,"OPERATIONS":5,"MAX":true,"FLAGS":9,"ID":"SENSOR_ERROR","TYPE":"BOOL","DEFAULT":false},"OPERATING_VOLTAGE":{"MIN":0,"OPERATIONS":5,"MAX":25.2,"FLAGS":1,"ID":"OPERATING_VOLTAGE","TYPE":"FLOAT","DEFAULT":0},"RSSI_PEER":{"MIN":-128,"OPERATIONS":5,"MAX":127,"FLAGS":1,"ID":"RSSI_PEER","TYPE":"INTEGER","DEFAULT":0},"ERROR_CODE":{"MIN":0,"OPERATIONS":5,"MAX":255,"FLAGS":9,"ID":"ERROR_CODE","TYPE":"INTEGER","DEFAULT":0},"UPDATE_PENDING":{"MIN":false,"OPERATIONS":5,"MAX":true,"FLAGS":9,"ID":"UPDATE_PENDING","TYPE":"BOOL","DEFAULT":false}}}
2019-01-07 01:05:33.429  - [32minfo[39m: hm-rpc.2 xmlrpc -> getParamsetDescription ["000F18A98C92BD:1","VALUES"]
2019-01-07 01:05:33.480  - [33mwarn[39m: hm-rpc.2 Send this info to developer: _id: "hm-rpc.meta.VALUES.HmIP-SAM.ACCELERATION_TRANSCEIVER.1"
2019-01-07 01:05:33.480  - [33mwarn[39m: hm-rpc.2 Send this info to developer: {"type":"meta","meta":{"adapter":"hm-rpc","type":"paramsetDescription"},"common":{},"native":{"MOTION":{"MIN":false,"OPERATIONS":5,"MAX":true,"FLAGS":1,"ID":"MOTION","TYPE":"BOOL","DEFAULT":false}}}
2019-01-07 01:05:33.534  - [32minfo[39m: host.ioBroker-Tinker object change system.adapter.hm-rpc.2
2019-01-07 01:05:33.535  - [32minfo[39m: host.ioBroker-Tinker stopInstance system.adapter.hm-rpc.2
2019-01-07 01:05:34.535  - [32minfo[39m: host.ioBroker-Tinker stopInstance timeout "1000 system.adapter.hm-rpc.2 killing pid  10497
2019-01-07 01:05:34.537  - [32minfo[39m: hm-rpc.2 xmlrpc -> 192.168.111.160:2010/ init ["http://192.168.111.176:2010",""]
2019-01-07 01:05:34.596  - [32minfo[39m: hm-rpc.2 Disconnected
2019-01-07 01:05:34.600  - [32minfo[39m: hm-rpc.2 xmlrpc -> 192.168.111.160:2010/ init ["http://192.168.111.176:2010",""]
2019-01-07 01:05:34.614  - [32minfo[39m: host.ioBroker-Tinker instance system.adapter.hm-rpc.2 terminated with code 0 (OK)
2019-01-07 01:05:37.053  - [32minfo[39m: host.ioBroker-Tinker instance system.adapter.hm-rpc.2 started with pid 10507
2019-01-07 01:05:37.737  - [32minfo[39m: hm-rpc.2 States connected to redis: 127.0.0.1:6379
2019-01-07 01:05:37.877  - [32minfo[39m: hm-rpc.2 starting. Version 1.8.3 in /opt/iobroker/node_modules/iobroker.hm-rpc, node: v8.14.0
2019-01-07 01:05:38.025  - [32minfo[39m: hm-rpc.2 xmlrpc server is trying to listen on 192.168.111.176:2010
2019-01-07 01:05:38.025  - [32minfo[39m: hm-rpc.2 xmlrpc client is trying to connect to 192.168.111.160:2010/ with ["http://192.168.111.176:2010","hm-rpc.2"]
2019-01-07 01:05:38.126  - [32minfo[39m: hm-rpc.2 Connected
2019-01-07 01:05:38.419  - [32minfo[39m: hm-rpc.2 xmlrpc <- listDevices ["hm-rpc.2"]
2019-01-07 01:05:38.426  - [32minfo[39m: hm-rpc.2 xmlrpc -> 0 devices
2019-01-07 01:05:38.691  - [32minfo[39m: hm-rpc.2 xmlrpc <- newDevices 6
2019-01-07 01:05:38.698  - [32minfo[39m: hm-rpc.2 new HmIP devices/channels after filter: 0
2019-01-07 01:06:01.232  - [32minfo[39m: tvspielfilm.0 force terminating adapter after 1 minute
2019-01-07 01:06:01.751  - [32minfo[39m: host.ioBroker-Tinker instance system.adapter.tvspielfilm.0 terminated with code 0 (OK)
2019-01-07 01:06:47.973  - [32minfo[39m: javascript.0 script.js.common.Statusansagen: TempUnter. im Hauswirtschaftsraum:16.6
2019-01-07 01:08:38.132  - [33mwarn[39m: hm-rpc.2 [KEEPALIVE] Connection timed out
2019-01-07 01:09:01.659  - [32minfo[39m: javascript.0 script.js.common.Statusansagen: TempUnter. im Hauswirtschaftsraum:16.7
2019-01-07 01:09:08.624  - [32minfo[39m: hm-rpc.2 xmlrpc <- listDevices ["hm-rpc.2"]

Die Date selbst ist zu gross.

Gruss Ralf

derrapf

~~@maloross:~~

Ich nutze diesen Sensor auch, der Datenpunkt Motion ist der, der die Bewegung meldet (true/false); waagerecht/senkrecht wird nur in der CCU angezeigt. `

Ach, echt? Sonst gibt's da nichts?

Dann muss ich nochmal schauen. Ich hab mit dem Ding rumgewackelt; in der CCU hat sich was getan, beim IOBroker nicht. Ich prüf das aber nochmal.

Gruss Ralf

J Riemann

derrapf

Danke

Jetzt gehts bei mir auch.

Der Trick war ,dass man im Rega Adapter auch HM-IP eintragen muss!

Gruss Ralf

skokarl

Moin,

kann man den nun fürs Garagentor nehmen oder nicht ?
( ich habe keine CCU, nur den hmip Adapter )

Gibt es da nur den Zustand true/false oder auch senkrecht waagrecht ?
Ich habs noch nicht ganz verstanden.

Danke, Gruß

Community Forum

NEWS

Homematic IP (Beschleunigungssensor): Kein Datenpunkt

Support us

382

32.8k

82.8k

1.3m