Jahresrückblick 2025 – unser neuer Blogbeitrag ist online! ✨

[RappiRN]

Nach Homorans Angaben müsste das HmIP-SMI55 sein.

Enrico

[foxriver76]

@RappiRN said in LONG PRESS und Toggle per Blockly:

HmIP-SMI55

Dafür sind jedenfalls keine Meta Informationen hinterlegt, falls du ( @Homoran ) sie auftreiben könntest durch einen Resync, wäre das super. ;-)

[Homoran]

@foxriver76
Ja, es ist der HmIP-SMI55

Habe gestern bereits mehrfach gelöscht und neu geladen.
Im Log steht nichts von send....

Metadaten dafür sind da.

hm-rpc.meta.VALUES.HmIP-SMI55.MAINTENANCE

aber nur für: KEY_TRANSCEIVER, MAINTANANCE, MOTION_DETRECTOR_TRANSCEIVER und STATE_RESET_TRANSCEIVER

Wie kann ich weiter helfen?

Gruß
Rainer

[foxriver76]

@Homoran sagte in LONG PRESS und Toggle per Blockly:

HmIP-SMI55

Entweder mal die Metadaten und das Gerät raus löschen (wäre vermutlich die schickere Lösung), dann auf den Log Eintrag hoffen oder die angelegten Metadaten zur Verfügung stellen.

[Homoran]

@foxriver76
Done!

2019-02-13 10:50:45.045  - debug: hm-rpc.1 getValueParamsets HmIP-SMI55.MAINTENANCE.1
2019-02-13 10:50:45.046  - info: hm-rpc.1 xmlrpc -> getParamsetDescription ["0014D709AEF7EF:0","VALUES"]
2019-02-13 10:50:45.068  - warn: hm-rpc.1 Send this info to developer: _id: "hm-rpc.meta.VALUES.HmIP-SMI55.MAINTENANCE.1"
2019-02-13 10:50:45.068  - warn: hm-rpc.1 Send this info to developer: {"type":"meta","meta":{"adapter":"hm-rpc","type":"paramsetDescription"},"common":{},"native":{"CONFIG_PENDING":{"MIN":false,"OPERATIONS":5,"MAX":true,"FLAGS":9,"ID":"CONFIG_PENDING","TYPE":"BOOL","DEFAULT":false},"DUTY_CYCLE":{"MIN":false,"OPERATIONS":5,"MAX":true,"FLAGS":1,"ID":"DUTY_CYCLE","TYPE":"BOOL","DEFAULT":false},"LOW_BAT":{"MIN":false,"OPERATIONS":5,"MAX":true,"FLAGS":9,"ID":"LOW_BAT","TYPE":"BOOL","DEFAULT":false},"INSTALL_TEST":{"MIN":false,"OPERATIONS":3,"MAX":true,"FLAGS":2,"ID":"INSTALL_TEST","TYPE":"BOOL","DEFAULT":false},"UNREACH":{"MIN":false,"OPERATIONS":5,"MAX":true,"FLAGS":25,"ID":"UNREACH","TYPE":"BOOL","DEFAULT":false},"OPERATING_VOLTAGE_STATUS":{"MIN":"NORMAL","OPERATIONS":5,"MAX":"OVERFLOW","FLAGS":1,"ID":"OPERATING_VOLTAGE_STATUS","TYPE":"ENUM","DEFAULT":"NORMAL","VALUE_LIST":["NORMAL","UNKNOWN","OVERFLOW"]},"RSSI_DEVICE":{"MIN":-128,"OPERATIONS":5,"MAX":127,"FLAGS":1,"ID":"RSSI_DEVICE","TYPE":"INTEGER","DEFAULT":0},"OPERATING_VOLTAGE":{"MIN":0,"OPERATIONS":5,"MAX":25.2,"FLAGS":1,"ID":"OPERATING_VOLTAGE","TYPE":"FLOAT","DEFAULT":0},"RSSI_PEER":{"MIN":-128,"OPERATIONS":5,"MAX":127,"FLAGS":1,"ID":"RSSI_PEER","TYPE":"INTEGER","DEFAULT":0},"ERROR_CODE":{"MIN":0,"OPERATIONS":5,"MAX":255,"FLAGS":9,"ID":"ERROR_CODE","TYPE":"INTEGER","DEFAULT":0},"UPDATE_PENDING":{"MIN":false,"OPERATIONS":5,"MAX":true,"FLAGS":9,"ID":"UPDATE_PENDING","TYPE":"BOOL","DEFAULT":false}}}

2019-02-13 10:50:45.084  - debug: hm-rpc.1 getValueParamsets HmIP-SMI55.KEY_TRANSCEIVER.1
2019-02-13 10:50:45.084  - info: hm-rpc.1 xmlrpc -> getParamsetDescription ["0014D709AEF7EF:1","VALUES"]
2019-02-13 10:50:45.097  - warn: hm-rpc.1 Send this info to developer: _id: "hm-rpc.meta.VALUES.HmIP-SMI55.KEY_TRANSCEIVER.1"
2019-02-13 10:50:45.097  - warn: hm-rpc.1 Send this info to developer: {"type":"meta","meta":{"adapter":"hm-rpc","type":"paramsetDescription"},"common":{},"native":{"PRESS_SHORT":{"MIN":false,"OPERATIONS":4,"MAX":true,"FLAGS":1,"ID":"PRESS_SHORT","TYPE":"ACTION","DEFAULT":false,"CONTROL":"BUTTON_NO_FUNCTION.SHORT"},"PRESS_LONG":{"MIN":false,"OPERATIONS":4,"MAX":true,"FLAGS":1,"ID":"PRESS_LONG","TYPE":"ACTION","DEFAULT":false,"CONTROL":"BUTTON_NO_FUNCTION.LONG"}}}

2019-02-13 10:50:45.107  - info: hm-rpc.1 xmlrpc -> getParamsetDescription ["0014D709AEF7EF:3","VALUES"]
2019-02-13 10:50:45.127  - warn: hm-rpc.1 Send this info to developer: _id: "hm-rpc.meta.VALUES.HmIP-SMI55.MOTIONDETECTOR_TRANSCEIVER.1"
2019-02-13 10:50:45.127  - warn: hm-rpc.1 Send this info to developer: {"type":"meta","meta":{"adapter":"hm-rpc","type":"paramsetDescription"},"common":{},"native":{"MOTION":{"MIN":false,"OPERATIONS":5,"MAX":true,"FLAGS":1,"ID":"MOTION","TYPE":"BOOL","DEFAULT":false,"CONTROL":"MOTIONDETECTOR_TRANSCEIVER.MOTION_DETECTION_STATE"},"RESET_MOTION":{"MIN":false,"OPERATIONS":2,"MAX":true,"FLAGS":1,"ID":"RESET_MOTION","TYPE":"ACTION","DEFAULT":false,"CONTROL":"MOTIONDETECTOR_TRANSCEIVER.RESET_MOTION"},"ILLUMINATION":{"MIN":0,"OPERATIONS":5,"MAX":163830,"FLAGS":1,"ID":"ILLUMINATION","TYPE":"FLOAT","DEFAULT":0,"CONTROL":"MOTIONDETECTOR_TRANSCEIVER.ILLUMINATION"},"CURRENT_ILLUMINATION":{"MIN":0,"OPERATIONS":5,"MAX":163830,"FLAGS":1,"ID":"CURRENT_ILLUMINATION","TYPE":"FLOAT","DEFAULT":0},"CURRENT_ILLUMINATION_STATUS":{"MIN":"NORMAL","OPERATIONS":5,"MAX":"OVERFLOW","FLAGS":1,"ID":"CURRENT_ILLUMINATION_STATUS","TYPE":"ENUM","DEFAULT":"NORMAL","VALUE_LIST":["NORMAL","UNKNOWN","OVERFLOW"]},"ILLUMINATION_STATUS":{"MIN":"NORMAL","OPERATIONS":5,"MAX":"OVERFLOW","FLAGS":1,"ID":"ILLUMINATION_STATUS","TYPE":"ENUM","DEFAULT":"NORMAL","VALUE_LIST":["NORMAL","UNKNOWN","OVERFLOW"]},"MOTION_DETECTION_ACTIVE":{"MIN":false,"OPERATIONS":7,"MAX":true,"FLAGS":1,"ID":"MOTION_DETECTION_ACTIVE","TYPE":"BOOL","DEFAULT":true,"CONTROL":"MOTIONDETECTOR_TRANSCEIVER.MOTION_DETECTION_ACTIVE"}}}

das ist alles!

[foxriver76]

Top, danke.
Und das ist der Dimmer, bei dem du meintest er hat für 50 % - 48,xy?

[Homoran]

@foxriver76
Nein der HMIP-SMI55, bei dem die Tasten ein True liefern (anscheinend beim Drücken und beim Loslassen) anstelle nur ein einmaliges Signal

Dimmer auch noch?

[paul53]

@Homoran sagte in LONG PRESS und Toggle per Blockly:

(anscheinend beim Drücken und beim Loslassen)

Beim Drücken ist noch nicht bekannt, ob ein langer Tastendruck erfolgt, sondern erst dann, wenn die zulässige Zeitspanne für den kurzen Tastendruck erreicht ist.

[foxriver76]

@Homoran Ja ich wollte dein Problem adressieren, dass der Dimmer die falschen Werte zeigt, insofern es daran liegt, was ich vermute. Bzgl dem Verhalten der Taster habe ich leider keine Erfahrung.

[Homoran]

@paul53
seltsamerweise aber doch - siehe log im früheren Screenshot
Das Blockly reagiert zweimal auf press-long

[Homoran]

@foxriver76
Was kann ich da für dich tun?

LEVEL	state state	level.dimmer			99.5 %

Copy aus den Objects - wurde per HM-Programm auf 100% gestellt

[foxriver76]

@Homoran Vermutlich das gleiche Spiel, vorher kannst du mal schauen, was da steht wenn du hinten auf den Stift bei dem State gehst und dann auf RAW. Da müsste dann ein MAX: 1.05 oder so stehen.

[Homoran]

@foxriver76 sagte in LONG PRESS und Toggle per Blockly:

Da müsste dann ein MAX: 1.05 oder so stehen.

oder so ;-)

"max": 100.49999999999999,

[paul53]

@Homoran sagte in LONG PRESS und Toggle per Blockly:

Das Blockly reagiert zweimal auf press-long

Das muss aber nicht bedeuten: Das erste Mal beim Drücken. Es kann auch sein, dass der erste Trigger zum Ende der PRESS_SHORT-Zeitspanne kommt. Zeichne bitte mal die beiden PRESS-Datenpunkte per History auf, damit wir alle schlauer werden.

Zur Lösung für Blockly: Ich würde eine Sperrvariable verwenden, die beim ersten Trigger auf true und wenn true, auf false gesetzt wird.

[Homoran]

@foxriver76
Hier die Send...

2019-02-13 11:37:21.099  - debug: hm-rpc.1 getValueParamsets HmIP-BDT.MAINTENANCE.2
2019-02-13 11:37:21.100  - info: hm-rpc.1 xmlrpc -> getParamsetDescription ["0008D8A998C04E:0","VALUES"]
2019-02-13 11:37:21.130  - warn: hm-rpc.1 Send this info to developer: _id: "hm-rpc.meta.VALUES.HmIP-BDT.MAINTENANCE.2"
2019-02-13 11:37:21.130  - warn: hm-rpc.1 Send this info to developer: {"type":"meta","meta":{"adapter":"hm-rpc","type":"paramsetDescription"},"common":{},"native":{"CONFIG_PENDING":{"MIN":false,"OPERATIONS":5,"MAX":true,"FLAGS":9,"ID":"CONFIG_PENDING","TYPE":"BOOL","DEFAULT":false},"DUTY_CYCLE":{"MIN":false,"OPERATIONS":5,"MAX":true,"FLAGS":1,"ID":"DUTY_CYCLE","TYPE":"BOOL","DEFAULT":false},"INSTALL_TEST":{"MIN":false,"OPERATIONS":3,"MAX":true,"FLAGS":2,"ID":"INSTALL_TEST","TYPE":"BOOL","DEFAULT":false},"ERROR_OVERHEAT":{"MIN":false,"OPERATIONS":5,"MAX":true,"FLAGS":9,"ID":"ERROR_OVERHEAT","TYPE":"BOOL","DEFAULT":false},"OPERATING_VOLTAGE_STATUS":{"MIN":"NORMAL","OPERATIONS":5,"MAX":"OVERFLOW","FLAGS":1,"ID":"OPERATING_VOLTAGE_STATUS","TYPE":"ENUM","DEFAULT":"NORMAL","VALUE_LIST":["NORMAL","UNKNOWN","OVERFLOW"]},"ERROR_UPDATE":{"MIN":false,"OPERATIONS":5,"MAX":true,"FLAGS":1,"ID":"ERROR_UPDATE","TYPE":"BOOL","DEFAULT":false},"ACTUAL_TEMPERATURE_STATUS":{"MIN":"NORMAL","OPERATIONS":5,"MAX":"UNDERFLOW","FLAGS":1,"ID":"ACTUAL_TEMPERATURE_STATUS","TYPE":"ENUM","DEFAULT":"NORMAL","VALUE_LIST":["NORMAL","UNKNOWN","OVERFLOW","UNDERFLOW"]},"RSSI_PEER":{"MIN":-128,"OPERATIONS":5,"MAX":127,"FLAGS":1,"ID":"RSSI_PEER","TYPE":"INTEGER","DEFAULT":0},"ERROR_OVERLOAD":{"MIN":false,"OPERATIONS":5,"MAX":true,"FLAGS":1,"ID":"ERROR_OVERLOAD","TYPE":"BOOL","DEFAULT":false},"ERROR_CODE":{"MIN":0,"OPERATIONS":5,"MAX":255,"FLAGS":9,"ID":"ERROR_CODE","TYPE":"INTEGER","DEFAULT":0},"UPDATE_PENDING":{"MIN":false,"OPERATIONS":5,"MAX":true,"FLAGS":9,"ID":"UPDATE_PENDING","TYPE":"BOOL","DEFAULT":false},"UNREACH":{"MIN":false,"OPERATIONS":5,"MAX":true,"FLAGS":25,"ID":"UNREACH","TYPE":"BOOL","DEFAULT":false},"RSSI_DEVICE":{"MIN":-128,"OPERATIONS":5,"MAX":127,"FLAGS":1,"ID":"RSSI_DEVICE","TYPE":"INTEGER","DEFAULT":0},"ACTUAL_TEMPERATURE":{"MIN":-3276.8,"OPERATIONS":5,"MAX":3276.7,"FLAGS":1,"ID":"ACTUAL_TEMPERATURE","TYPE":"FLOAT","DEFAULT":0},"OPERATING_VOLTAGE":{"MIN":0,"OPERATIONS":5,"MAX":25.2,"FLAGS":1,"ID":"OPERATING_VOLTAGE","TYPE":"FLOAT","DEFAULT":0}}}

2019-02-13 11:37:21.147  - debug: hm-rpc.1 getValueParamsets HmIP-BDT.KEY_TRANSCEIVER.2
2019-02-13 11:37:21.148  - info: hm-rpc.1 xmlrpc -> getParamsetDescription ["0008D8A998C04E:1","VALUES"]
2019-02-13 11:37:21.158  - warn: hm-rpc.1 Send this info to developer: _id: "hm-rpc.meta.VALUES.HmIP-BDT.KEY_TRANSCEIVER.2"
2019-02-13 11:37:21.158  - warn: hm-rpc.1 Send this info to developer: {"type":"meta","meta":{"adapter":"hm-rpc","type":"paramsetDescription"},"common":{},"native":{"PRESS_SHORT":{"MIN":false,"OPERATIONS":4,"MAX":true,"FLAGS":1,"ID":"PRESS_SHORT","TYPE":"ACTION","DEFAULT":false,"CONTROL":"BUTTON_NO_FUNCTION.SHORT"},"PRESS_LONG":{"MIN":false,"OPERATIONS":4,"MAX":true,"FLAGS":1,"ID":"PRESS_LONG","TYPE":"ACTION","DEFAULT":false,"CONTROL":"BUTTON_NO_FUNCTION.LONG"}}}
...
2019-02-13 11:37:21.193  - warn: hm-rpc.1 Send this info to developer: _id: "hm-rpc.meta.VALUES.HmIP-BDT.DIMMER_TRANSMITTER.2"
2019-02-13 11:37:21.193  - warn: hm-rpc.1 Send this info to developer: {"type":"meta","meta":{"adapter":"hm-rpc","type":"paramsetDescription"},"common":{},"native":{"SECTION_STATUS":{"MIN":"NORMAL","OPERATIONS":5,"MAX":"UNKNOWN","FLAGS":1,"ID":"SECTION_STATUS","TYPE":"ENUM","DEFAULT":"NORMAL","VALUE_LIST":["NORMAL","UNKNOWN"]},"LEVEL_STATUS":{"MIN":"NORMAL","OPERATIONS":5,"MAX":"ERROR","FLAGS":1,"ID":"LEVEL_STATUS","TYPE":"ENUM","DEFAULT":"NORMAL","VALUE_LIST":["NORMAL","UNKNOWN","OVERFLOW","UNDERFLOW","ERROR"]},"PROCESS":{"MIN":"STABLE","OPERATIONS":5,"MAX":"NOT_STABLE","FLAGS":1,"ID":"PROCESS","TYPE":"ENUM","DEFAULT":"STABLE","VALUE_LIST":["STABLE","NOT_STABLE"]},"LEVEL":{"MIN":0,"OPERATIONS":5,"MAX":1.005,"FLAGS":1,"ID":"LEVEL","TYPE":"FLOAT","DEFAULT":0,"CONTROL":"DIMMER_REAL.LEVEL"},"SECTION":{"MIN":0,"OPERATIONS":5,"MAX":15,"FLAGS":1,"ID":"SECTION","TYPE":"INTEGER","DEFAULT":0},"ACTIVITY_STATE":{"MIN":"UNKNOWN","OPERATIONS":5,"MAX":"STABLE","FLAGS":1,"ID":"ACTIVITY_STATE","TYPE":"ENUM","DEFAULT":"UNKNOWN","VALUE_LIST":["UNKNOWN","UP","DOWN","STABLE"]}}}
...
2019-02-13 11:37:21.230  - warn: hm-rpc.1 Send this info to developer: _id: "hm-rpc.meta.VALUES.HmIP-BDT.DIMMER_VIRTUAL_RECEIVER.2"
2019-02-13 11:37:21.230  - warn: hm-rpc.1 Send this info to developer: {"type":"meta","meta":{"adapter":"hm-rpc","type":"paramsetDescription"},"common":{},"native":{"SECTION_STATUS":{"MIN":"NORMAL","OPERATIONS":5,"MAX":"UNKNOWN","FLAGS":1,"ID":"SECTION_STATUS","TYPE":"ENUM","DEFAULT":"NORMAL","VALUE_LIST":["NORMAL","UNKNOWN"]},"LEVEL_STATUS":{"MIN":"NORMAL","OPERATIONS":5,"MAX":"ERROR","FLAGS":1,"ID":"LEVEL_STATUS","TYPE":"ENUM","DEFAULT":"NORMAL","VALUE_LIST":["NORMAL","UNKNOWN","OVERFLOW","UNDERFLOW","ERROR"]},"ON_TIME":{"MIN":0,"UNIT":"s","OPERATIONS":2,"MAX":8580000,"FLAGS":1,"ID":"ON_TIME","TYPE":"FLOAT","DEFAULT":0},"PROCESS":{"MIN":"STABLE","OPERATIONS":5,"MAX":"NOT_STABLE","FLAGS":1,"ID":"PROCESS","TYPE":"ENUM","DEFAULT":"STABLE","VALUE_LIST":["STABLE","NOT_STABLE"]},"RAMP_TIME":{"MIN":0,"UNIT":"s","OPERATIONS":2,"MAX":8580000,"FLAGS":1,"ID":"RAMP_TIME","TYPE":"FLOAT","DEFAULT":0.5},"LEVEL":{"MIN":0,"UNIT":"100%","OPERATIONS":7,"MAX":1.005,"FLAGS":1,"ID":"LEVEL","TYPE":"FLOAT","DEFAULT":0,"CONTROL":"DIMMER.LEVEL"},"SECTION":{"MIN":0,"OPERATIONS":5,"MAX":15,"FLAGS":1,"ID":"SECTION","TYPE":"INTEGER","DEFAULT":0},"ACTIVITY_STATE":{"MIN":"UNKNOWN","OPERATIONS":5,"MAX":"STABLE","FLAGS":1,"ID":"ACTIVITY_STATE","TYPE":"ENUM","DEFAULT":"UNKNOWN","VALUE_LIST":["UNKNOWN","UP","DOWN","STABLE"]}}}

2019-02-13 11:37:21.262  - debug: hm-rpc.1 getValueParamsets HmIP-BDT.DIMMER_WEEK_PROFILE.2
2019-02-13 11:37:21.263  - info: hm-rpc.1 xmlrpc -> getParamsetDescription ["0008D8A998C04E:7","VALUES"]
2019-02-13 11:37:21.275  - warn: hm-rpc.1 Send this info to developer: _id: "hm-rpc.meta.VALUES.HmIP-BDT.DIMMER_WEEK_PROFILE.2"
2019-02-13 11:37:21.275  - warn: hm-rpc.1 Send this info to developer: {"type":"meta","meta":{"adapter":"hm-rpc","type":"paramsetDescription"},"common":{},"native":{"WEEK_PROGRAM_TARGET_CHANNEL_LOCK":{"MIN":"MANU_MODE","OPERATIONS":2,"MAX":"AUTO_MODE_WITHOUT_RESET","FLAGS":1,"ID":"WEEK_PROGRAM_TARGET_CHANNEL_LOCK","TYPE":"ENUM","DEFAULT":"MANU_MODE","VALUE_LIST":["MANU_MODE","AUTO_MODE_WITH_RESET","AUTO_MODE_WITHOUT_RESET"],"CONTROL":"WEEK_PROFILE.TARGET_CHANNEL_LOCK"},"WEEK_PROGRAM_TARGET_CHANNEL_LOCKS":{"MIN":0,"OPERATIONS":2,"MAX":16777215,"FLAGS":1,"ID":"WEEK_PROGRAM_TARGET_CHANNEL_LOCKS","TYPE":"INTEGER","DEFAULT":0,"CONTROL":"WEEK_PROFILE.TARGET_CHANNEL_LOCKS"},"WEEK_PROGRAM_CHANNEL_LOCKS":{"MIN":0,"OPERATIONS":5,"MAX":16777215,"FLAGS":1,"ID":"WEEK_PROGRAM_CHANNEL_LOCKS","TYPE":"INTEGER","DEFAULT":0,"CONTROL":"WEEK_PROFILE.CHANNEL_LOCKS"}}}

[foxriver76]

@Homoran Ja genau, für dich lokal, könntest du das Problem einfach hier beseitigen. Wenn es für dich kein Aufwand ist, wäre Meta + Objekt löschen und Daten hier posten für die Allgemeinheit cool. ;-)

EDIT: hast ja schon.. vielen Dank :-)

[Homoran]

@paul53 sagte in LONG PRESS und Toggle per Blockly:

Zeichne bitte mal die beiden PRESS-Datenpunkte per History auf, damit wir alle schlauer werden.

mach ich!

@paul53 sagte in LONG PRESS und Toggle per Blockly:

Ich würde eine Sperrvariable verwenden, die beim ersten Trigger auf true und wenn true, auf false gesetzt wird.

und da habe ich einiges versucht, hat aber nicht geklappt.

Da kommen wir an meine Grenzen, ich weiß anscheinend nicht genau, wo ich sie starten und wo beenden muss.
Eine oder zwei Sekunden müssten reichen

[paul53]

@Homoran sagte in LONG PRESS und Toggle per Blockly:

Da kommen wir an meine Grenzen, ich weiß anscheinend nicht genau, wo ich sie starten und wo beenden muss.

[Homoran]

@paul53
Danke!
Mach ich gleich.

Doch zuerst die letzten Studien.
log :

2019-02-13 11:51:20.996  - info: javascript.0 script.js.Licht.Badlicht_repair: oben lang!
2019-02-13 11:51:20.997  - info: javascript.0 script.js.Licht.Badlicht_repair: nicht hell
2019-02-13 11:51:21.556  - info: javascript.0 script.js.Licht.Badlicht_repair: oben lang!
2019-02-13 11:51:21.556  - info: javascript.0 script.js.Licht.Badlicht_repair: nicht hell
2019-02-13 11:51:34.487  - info: javascript.0 script.js.Licht.Badlicht_repair: oben lang!
2019-02-13 11:51:34.487  - info: javascript.0 script.js.Licht.Badlicht_repair: hell
2019-02-13 11:51:34.919  - info: javascript.0 script.js.Licht.Badlicht_repair: oben lang!
2019-02-13 11:51:34.919  - info: javascript.0 script.js.Licht.Badlicht_repair: hell
2019-02-13 11:51:40.389  - info: javascript.0 script.js.Licht.Badlicht_repair: oben lang!
2019-02-13 11:51:40.389  - info: javascript.0 script.js.Licht.Badlicht_repair: nicht hell
2019-02-13 11:51:40.931  - info: javascript.0 script.js.Licht.Badlicht_repair: oben lang!
2019-02-13 11:51:40.931  - info: javascript.0 script.js.Licht.Badlicht_repair: nicht hell
2019-02-13 11:51:42.652  - info: javascript.0 script.js.Licht.Badlicht_repair: oben lang!
2019-02-13 11:51:42.652  - info: javascript.0 script.js.Licht.Badlicht_repair: hell
2019-02-13 11:51:42.898  - info: javascript.0 script.js.Licht.Badlicht_repair: oben lang!
2019-02-13 11:51:42.898  - info: javascript.0 script.js.Licht.Badlicht_repair: hell
2019-02-13 11:51:44.408  - info: javascript.0 script.js.Licht.Badlicht_repair: oben lang!
2019-02-13 11:51:44.408  - info: javascript.0 script.js.Licht.Badlicht_repair: nicht hell
2019-02-13 11:51:44.653  - info: javascript.0 script.js.Licht.Badlicht_repair: oben lang!
2019-02-13 11:51:44.653  - info: javascript.0 script.js.Licht.Badlicht_repair: nicht hell

History:

true	true		2019-02-13 11:51:44.652	
true	true		2019-02-13 11:51:44.407	
true	true		2019-02-13 11:51:42.897	
true	true		2019-02-13 11:51:42.651	
true	true		2019-02-13 11:51:40.930	
true	true		2019-02-13 11:51:40.388	
true	true		2019-02-13 11:51:34.918	
true	true		2019-02-13 11:51:34.486	
true	true		2019-02-13 11:51:21.556	
true	true		2019-02-13 11:51:20.995	
true	true		2019-02-13 11:48:44.555	
true	true		2019-02-13 11:48:43.520	
true	true		2019-02-13 11:48:40.226	
true	true		2019-02-13 11:48:39.925	
true	true		2019-02-13 11:48:37.540	
true	true		2019-02-13 11:48:36.601	
true	true		2019-02-13 11:48:34.290	
true	true		2019-02-13 11:48:33.352	
true	true		2019-02-13 11:48:30.586	
true	true		2019-02-13 11:48:29.662	
true	true		2019-02-13 11:48:24.156	
true	true		2019-02-13 11:48:23.196	
null	true		2019-02-13 11:44:52.355	

[paul53]

@Homoran sagte in LONG PRESS und Toggle per Blockly:

History:

Danke.
Der Vergleich mit PRESS_SHORT wäre noch interessant: Kommt der erste PRESS_LONG-Trigger vor dem PRESS_SHORT-Trigger (beim Drücken) oder gleichzeitig ? Kennst Du die Zeitspanne für PRESS_SHORT ?