[gelöst] Windows 7 Fehler bei Installation von YAHKA

wolfpack57

Moin,

leider hänge ich auch bei der Installation und komme nicht weiter…

also habe ich das runtergeladen:

https://www.samuelattard.com/files/bonjourcore2.msi

dann installiert und die Datei wieder gelöscht

war das so gemeint?

dann habe ich diesen runtergeladen, installiert und die Datei wieder gelöscht:

https://www.samuelattard.com/files/bonjoursdksetup.exe

Hiermit kann ich leider gar nichts anfangen:

set BONJOUR_SDK_HOME=C:\Program Files\Bonjour SDK

muss ich das über das terminal ausführen? Und was soll bei dem Code rein?

Ich habe immer folgenden Fehler:

Fertig mit Fehler: host.DESKTOP-SK00CCS Cannot install yahka

es scheint irgendwie an den Ports zu liegen,

das steht im Log:

host.DESKTOP-SK00CCS 2019-01-29 15:46:56.981 info Restart adapter system.adapter.terminal.1 because enabled

host.DESKTOP-SK00CCS 2019-01-29 15:46:56.981 error instance system.adapter.terminal.1 terminated with code 1 ()

terminal.1 2019-01-29 15:46:56.828 info starting. Version 0.1.2 in C:/iobroker/node_modules/iobroker.terminal, node: v6.9.1

host.DESKTOP-SK00CCS 2019-01-29 15:46:56.268 info instance system.adapter.terminal.1 started with pid 33664

host.DESKTOP-SK00CCS 2019-01-29 15:46:26.260 info Restart adapter system.adapter.terminal.1 because enabled

host.DESKTOP-SK00CCS 2019-01-29 15:46:26.259 error instance system.adapter.terminal.1 terminated with code 1 ()

terminal.1 2019-01-29 15:46:26.225 error port 8088 already in use

terminal.1 2019-01-29 15:46:26.057 info starting. Version 0.1.2 in C:/iobroker/node_modules/iobroker.terminal, node: v6.9.1

host.DESKTOP-SK00CCS 2019-01-29 15:46:25.486 info instance system.adapter.terminal.1 started with pid 33028

apollon77

Das code weg inkl der eckigen Klammern. Und ja kommandozeile

Der Fehler mit der einen Zeile ist nicht sehr hilfreich.

Gesendet vom Handy …

wolfpack57

Danke erst mal für die Antwort!

:D

Ich habe das alles also noch mal ausgeführt…

Viel weitergebracht hat mich das nicht, aber jetzt läuft die Installation des adapters wenigstens an und ich bekomme auch einen anständigen Fehlercode angezeigt.

Wer ist eigentlich diese Python?

Fehler Bericht:

$ ./iobroker add yahka  --host DESKTOP-SK00CCS
NPM version: 3.10.8
npm install iobroker.yahka --production --save --prefix "C:/iobroker" (System call)
gyp
 ERR! configure error gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.
gyp ERR! stack     at failNoPython (C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\configure.js:449:14)
gyp ERR! stack     at C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\configure.js:404:11
gyp ERR! stack     at FSReqWrap.oncomplete (fs.js:123:15)

gyp ERR! System Windows_NT 10.0.17763gyp ERR! command "C:\\Program Files\\nodejs\\node.exe" "C:\\Program Files\\nodejs\\node_modules\\npm\\node_modules\\node-gyp\\bin\\node-gyp.js" "rebuild"
gyp ERR! cwd C:\iobroker\node_modules\iobroker.yahka\node_modules\curve25519-n
gyp ERR! node -v v6.9.1
gyp ERR! node-gyp -v
 v3.4.0gyp ERR! not ok 

npm ERR! Windows_NT 10.0.17763
npm ERR! argv "C:\\Program Files\\nodejs\\node.exe" "C:\\Program Files\\nodejs\\node_modules\\npm\\bin\\npm-cli.js" "install" "iobroker.yahka" "--production" "--save" "--prefix" "C:/iobroker"npm ERR! node v6.9.1
npm ERR! npm  v3.10.8
npm ERR! code ELIFECYCLE

npm 
ERR! curve25519-n@1.4.0 install: `node-gyp rebuild`npm ERR! Exit status 1
npm ERR! 
npm ERR! Failed at the curve25519-n@1.4.0 install script 'node-gyp rebuild'.

npm ERR! Make sure you have the latest version of node.js and npm installed.npm ERR! If you do, this is most likely a problem with the curve25519-n package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR!     node-gyp rebuild
npm ERR! You can get information on how to open an issue for this project with:
npm ERR!     npm bugs curve25519-n
npm ERR! Or if that isn't available, you can get their info via:
npm ERR!     npm owner ls curve25519-n
npm ERR! There is likely additional logging output above.

npm ERR! Please include the following file with any support request:npm ERR!     C:\iobroker\node_modules\iobroker\npm-debug.log
npm ERR! code 1

host.DESKTOP-SK00CCS install adapter yahka
NPM version: 3.10.8
npm install iobroker.yahka --production --save --prefix "C:/iobroker" (System call)
gyp

ERR! configure error gyp ERR! stack
 Error: Can't find Python executable "python", you can set the PYTHON env variable.gyp ERR! stack     at failNoPython (C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\configure.js:449:14)
gyp ERR! stack     at C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\configure.js:404:11
gyp ERR! stack     at FSReqWrap.oncomplete (fs.js:123:15)

gyp ERR! System Windows_NT 10.0.17763gyp ERR! command "C:\\Program Files\\nodejs\\node.exe" "C:\\Program Files\\nodejs\\node_modules\\npm\\node_modules\\node-gyp\\bin\\node-gyp.js" "rebuild"
gyp ERR! cwd C:\iobroker\node_modules\iobroker.yahka\node_modules\curve25519-n
gyp ERR! node -v v6.9.1
gyp ERR! node-gyp -v v3.4.0

gyp ERR! not ok 
npm
 ERR! Windows_NT 10.0.17763npm ERR! argv "C:\\Program Files\\nodejs\\node.exe" "C:\\Program Files\\nodejs\\node_modules\\npm\\bin\\npm-cli.js" "install" "iobroker.yahka" "--production" "--save" "--prefix" "C:/iobroker"
npm ERR! node v6.9.1
npm ERR! npm  v3.10.8
npm ERR! code ELIFECYCLE

npm
 ERR! curve25519-n@1.4.0 install: `node-gyp rebuild`npm ERR! Exit status 1
npm ERR! 
npm ERR! Failed at the curve25519-n@1.4.0 install script 'node-gyp rebuild'.
npm ERR! Make sure you have the latest version of node.js and npm installed.
npm ERR! If you do, this is most likely a problem with the curve25519-n package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR!
     node-gyp rebuildnpm ERR! You can get information on how to open an issue for this project with:
npm ERR!     npm bugs curve25519-n
npm ERR! Or if that isn't available, you can get their info via:
npm ERR!     npm owner ls curve25519-n
npm ERR! There is likely additional logging output above.

npm ERR! Please include the following file with any support request:npm ERR!     C:\iobroker\node_modules\iobroker\npm-debug.log
npm ERR! code 1

host.DESKTOP-SK00CCS install adapter yahka
NPM version: 3.10.8
npm install iobroker.yahka --production --save --prefix "C:/iobroker" (System call)
gyp
 ERR! configure error 
gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.gyp ERR! stack     at failNoPython (C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\configure.js:449:14)
gyp ERR! stack     at C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\configure.js:404:11

gyp ERR! stack     at FSReqWrap.oncomplete (fs.js:123:15)gyp ERR! System Windows_NT 10.0.17763

gyp ERR! command "C:\\Program Files\\nodejs\\node.exe" "C:\\Program Files\\nodejs\\node_modules\\npm\\node_modules\\node-gyp\\bin\\node-gyp.js" "rebuild"gyp ERR! cwd C:\iobroker\node_modules\iobroker.yahka\node_modules\curve25519-n
gyp ERR! node -v v6.9.1
gyp ERR! node-gyp -v v3.4.0
gyp ERR! not ok 

npm ERR!
 Windows_NT 10.0.17763npm ERR! argv "C:\\Program Files\\nodejs\\node.exe" "C:\\Program Files\\nodejs\\node_modules\\npm\\bin\\npm-cli.js" "install" "iobroker.yahka" "--production" "--save" "--prefix" "C:/iobroker"
npm ERR! node v6.9.1
npm ERR! npm  v3.10.8
npm ERR! code ELIFECYCLE

npm ERR! curve25519-n@1.4.0 install: `node-gyp rebuild`npm ERR! Exit status 1
npm
 ERR! npm ERR! Failed at the curve25519-n@1.4.0 install script 'node-gyp rebuild'.
npm ERR! Make sure you have the latest version of node.js and npm installed.
npm ERR! If you do, this is most likely a problem with the curve25519-n package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR!     node-gyp rebuild
npm ERR! You can get information on how to open an issue for this project with:
npm ERR!     npm bugs curve25519-n
npm ERR! Or if that isn't available, you can get their info via:
npm ERR!     npm owner ls curve25519-n
npm ERR!
 There is likely additional logging output above.

npm ERR! Please include the following file with any support request:npm ERR!     C:\iobroker\node_modules\iobroker\npm-debug.log
npm ERR! code 1

host.DESKTOP-SK00CCS install adapter yahka
ERROR: host.DESKTOP-SK00CCS Cannot install yahka

wolfpack57

ich komme damit einfach nicht weiter…

habt ihr noch ein Tipp für mich?

mein System:

dann habe ich erst mal das nodejs auf die von dem Infoadapter empfohlene Version gebracht

im Fehler stand was von Python, habe ich versucht das mal zu aktualisieren…

Hiermit habe ich natürlich auch experimentiert

das ist mir aber auch nicht ganz klar…

über die links kann ich die Set-up Dateien runterladen und installieren...

aber ist mit den execute und remove Befehlen nur das installieren der links und löschen der Set-up Dateien im Anschluss gemeint?

Wenn ich die Befehle über cmd eingebe, funktioniert das nicht...

der aktuelle Fehlerbericht vom installieren:

$ ./iobroker add yahka  --host DESKTOP-SK00CCS
NPM version: 6.4.1
npm install iobroker.yahka --production --save --prefix "C:/iobroker" (System call)
gyp
 ERR! configure error gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.
gyp ERR! stack     at PythonFinder.failNoPython (C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\configure.js:484:19)
gyp
 ERR! stack     at PythonFinder. <anonymous>(C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\configure.js:509:16)gyp ERR!

stack     at C:\Program Files\nodejs\node_modules\npm\node_modules\graceful-fs\polyfills.js:284:29gyp ERR! stack     at FSReqWrap.oncomplete (fs.js:152:21)
gyp
 ERR! System Windows_NT 10.0.17763gyp ERR! command "C:\\Program Files\\nodejs\\node.exe" "C:\\Program Files\\nodejs\\node_modules\\npm\\node_modules\\node-gyp\\bin\\node-gyp.js" "rebuild"
[attachment=1]2.PNG[/attachment]gyp 
ERR! cwd C:\iobroker\node_modules\iobroker.yahka\node_modules\curve25519-ngyp ERR! node -v v8.15.0
gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok 

npm
 ERR! code ELIFECYCLEnpm
 ERR! errno 1npm ERR! curve25519-n@1.4.0 install: `node-gyp rebuild`
npm ERR!
 Exit status 1npm ERR! 
npm ERR! Failed at the curve25519-n@1.4.0 install script.
npm ERR!
 This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:npm ERR!     C:\WINDOWS\system32\config\systemprofile\AppData\Roaming\npm-cache\_logs\2019-02-01T19_33_30_303Z-debug.log

host.DESKTOP-SK00CCS install adapter yahka
NPM version: 6.4.1
npm install iobroker.yahka --production --save --prefix "C:/iobroker" (System call)
gyp
 ERR! configure error gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.
gyp ERR! stack
     at PythonFinder.failNoPython (C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\configure.js:484:19)gyp ERR! stack     at PythonFinder. <anonymous>(C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\configure.js:509:16)
gyp ERR! stack     at C:\Program Files\nodejs\node_modules\npm\node_modules\graceful-fs\polyfills.js:284:29
gyp ERR! stack     at FSReqWrap.oncomplete (fs.js:152:21)

gyp ERR! System Windows_NT 10.0.17763gyp ERR! command
 "C:\\Program Files\\nodejs\\node.exe" "C:\\Program Files\\nodejs\\node_modules\\npm\\node_modules\\node-gyp\\bin\\node-gyp.js" "rebuild"gyp ERR! cwd C:\iobroker\node_modules\iobroker.yahka\node_modules\curve25519-n
gyp ERR! node -v v8.15.0
gyp
 ERR! node-gyp -v v3.8.0gyp ERR! not ok 

npm
 ERR! code ELIFECYCLEnpm ERR! errno 1

npm
 ERR! curve25519-n@1.4.0 install: `node-gyp rebuild`npm ERR! Exit status 1
npm ERR! 
npm
 ERR! Failed at the curve25519-n@1.4.0 install script.npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:npm ERR!     C:\WINDOWS\system32\config\systemprofile\AppData\Roaming\npm-cache\_logs\2019-02-01T19_33_37_892Z-debug.log

host.DESKTOP-SK00CCS install adapter yahka
NPM version: 6.4.1
npm install iobroker.yahka --production --save --prefix "C:/iobroker" (System call)
gyp
 ERR! configure error gyp 
ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.gyp ERR! stack     at PythonFinder.failNoPython (C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\configure.js:484:19)
gyp ERR! stack     at PythonFinder. <anonymous>(C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\configure.js:509:16)
gyp ERR! stack     at C:\Program Files\nodejs\node_modules\npm\node_modules\graceful-fs\polyfills.js:284:29
gyp 
ERR! 
stack     at FSReqWrap.oncomplete (fs.js:152:21)gyp ERR! System Windows_NT 10.0.17763
gyp ERR! command
 "C:\\Program Files\\nodejs\\node.exe" "C:\\Program Files\\nodejs\\node_modules\\npm\\node_modules\\node-gyp\\bin\\node-gyp.js" "rebuild"gyp ERR! cwd C:\iobroker\node_modules\iobroker.yahka\node_modules\curve25519-n
gyp ERR! node -v v8.15.0
gyp ERR! node-gyp -v v3.8.0

gyp ERR! not ok 
npm
 ERR! code ELIFECYCLEnpm ERR! errno 1

npm
 ERR! curve25519-n@1.4.0 install: `node-gyp rebuild`npm ERR! Exit status 1
npm ERR! 
npm 
ERR! Failed at the curve25519-n@1.4.0 install script.npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:npm ERR!     C:\WINDOWS\system32\config\systemprofile\AppData\Roaming\npm-cache\_logs\2019-02-01T19_33_45_471Z-debug.log

host.DESKTOP-SK00CCS install adapter yahka
ERROR: host.DESKTOP-SK00CCS Cannot install yahka
ERROR: process exited with code 13</anonymous></anonymous></anonymous>

Stabilostick

Die PYTHON-Umgebungsvariable wird von den Windows-Build-Tools hinzugefügt. Wenn sie bei Dir fehlt, hast Du entweder Deinen Rechner nach der Installation der Build-Tools nicht neu gestartet oder es ist etwas bei der Installation evtl. schiefgelaufen. Hattest Du eine administrative Kommabdozeile zur Installation genutzt?

Mache zum Test dann einfach eine neue Kommandozeile auf und gib den Befehl SET ein. In dessen Aisgabe muss irgendwo PYTHON stehen. Wenn ja, dann mit einem neu gestarteten ioBroker die Installation von yahka noch einmal versuchen.

wolfpack57

Moin und erst mal danke für Deine Antwort.

Ja, ich habe das damals als Administrator installiert…

auch jetzt habe ich cmd als Administrator geöffnet und set eingegeben.

Irgendwo in der Mitte steht was von Python 27

hier ein Screenshot:

Dann habe ich jetzt den Rechner zum x-ten Mal neu gestartet und zum x-ten Mal installiert

und bekam wieder folgenden Fehler:

$ ./iobroker add yahka  --host DESKTOP-SK00CCS
NPM version: 6.4.1
npm install iobroker.yahka --production --save --prefix "C:/iobroker" (System call)
gyp
 ERR! configure error gyp
 ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.gyp ERR! stack     at PythonFinder.failNoPython (C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\configure.js:484:19)
gyp ERR! stack     at PythonFinder. <anonymous>(C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\configure.js:509:16)
gyp ERR! stack     at C:\Program Files\nodejs\node_modules\npm\node_modules\graceful-fs\polyfills.js:284:29
gyp ERR! stack     at FSReqWrap.oncomplete (fs.js:152:21)

gyp ERR! System Windows_NT 10.0.17763gyp 
ERR! command "C:\\Program Files\\nodejs\\node.exe" "C:\\Program Files\\nodejs\\node_modules\\npm\\node_modules\\node-gyp\\bin\\node-gyp.js" "rebuild"gyp ERR! cwd C:\iobroker\node_modules\iobroker.yahka\node_modules\curve25519-n
gyp ERR! node -v v8.15.0
gyp ERR! node-gyp -v v3.8.0

gyp ERR! not ok 
npm
 ERR! code ELIFECYCLEnpm ERR! errno 1

npm
 ERR! curve25519-n@1.4.0 install: `node-gyp rebuild`npm ERR! Exit status 1
npm ERR! 
npm ERR! Failed at the curve25519-n@1.4.0 install script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:npm ERR!     C:\WINDOWS\system32\config\systemprofile\AppData\Roaming\npm-cache\_logs\2019-02-04T10_24_29_493Z-debug.log

host.DESKTOP-SK00CCS install adapter yahka
NPM version: 6.4.1
npm install iobroker.yahka --production --save --prefix "C:/iobroker" (System call)
gyp
 ERR! configure error 
gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.gyp ERR! stack     at PythonFinder.failNoPython (C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\configure.js:484:19)
gyp ERR! stack     at PythonFinder. <anonymous>(C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\configure.js:509:16)
gyp ERR! stack     at C:\Program Files\nodejs\node_modules\npm\node_modules\graceful-fs\polyfills.js:284:29
gyp ERR! stack     at FSReqWrap.oncomplete (fs.js:152:21)

gyp ERR!

System Windows_NT 10.0.17763gyp ERR! command "C:\\Program Files\\nodejs\\node.exe" "C:\\Program Files\\nodejs\\node_modules\\npm\\node_modules\\node-gyp\\bin\\node-gyp.js" "rebuild"
gyp ERR! cwd C:\iobroker\node_modules\iobroker.yahka\node_modules\curve25519-n
gyp
 ERR! node -v v8.15.0gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok 

npm
 ERR! code ELIFECYCLEnpm ERR! errno 1

npm
 ERR! curve25519-n@1.4.0 install: `node-gyp rebuild`npm ERR! Exit status 1
npm ERR! 
npm
 ERR! Failed at the curve25519-n@1.4.0 install script.npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:npm ERR!     C:\WINDOWS\system32\config\systemprofile\AppData\Roaming\npm-cache\_logs\2019-02-04T10_24_37_199Z-debug.log

host.DESKTOP-SK00CCS install adapter yahka
NPM version: 6.4.1
npm install iobroker.yahka --production --save --prefix "C:/iobroker" (System call)
gyp
 ERR!
 configure error gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.
gyp ERR! stack     at PythonFinder.failNoPython (C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\configure.js:484:19)
gyp ERR! stack     at PythonFinder. <anonymous>(C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\configure.js:509:16)
gyp ERR! stack
     at C:\Program Files\nodejs\node_modules\npm\node_modules\graceful-fs\polyfills.js:284:29gyp ERR! stack     at FSReqWrap.oncomplete (fs.js:152:21)
gyp ERR! System Windows_NT 10.0.17763
gyp ERR! command "C:\\Program Files\\nodejs\\node.exe" "C:\\Program Files\\nodejs\\node_modules\\npm\\node_modules\\node-gyp\\bin\\node-gyp.js" "rebuild"

gyp ERR! cwd C:\iobroker\node_modules\iobroker.yahka\node_modules\curve25519-ngyp ERR! node -v v8.15.0
gyp ERR! node-gyp -v v3.8.0

gyp ERR! not ok 
npm
 ERR! code ELIFECYCLEnpm ERR! errno 1

npm ERR! curve25519-n@1.4.0 install: `node-gyp rebuild`npm ERR! Exit status 1

npm ERR! npm ERR! Failed at the curve25519-n@1.4.0 install script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:npm ERR!     C:\WINDOWS\system32\config\systemprofile\AppData\Roaming\npm-cache\_logs\2019-02-04T10_24_44_781Z-debug.log

host.DESKTOP-SK00CCS install adapter yahka
ERROR: host.DESKTOP-SK00CCS Cannot install yahka
ERROR: process exited with code 13</anonymous></anonymous></anonymous>

Stabilostick

Es fehlt die PYTHON-Umgebungsvariable mi dem exakten Pfad zu Python.exe

Google das mal.

Stabilostick

Oder teste damit (als Admin ausführen):

 npm --add-python-to-path='true' --debug install --global windows-build-tools

wolfpack57

o. k., über die Computer Einstellung… Umgebungsvariablen habe ich jetzt den Python path herausgefunden und schon mal kopiert,

aber wo muss ich den jetzt eingeben??

Stabilostick

In der Kommandozeile

set PYTHON=hier/der/Pfad/inkl./der/EXE

wolfpack57

also das lief problemlos durch, hat aber beim Installieren von dem Adapter keinen Fortschritt gebracht

npm –add-python-to-path='true' --debug install --global windows-build-tools

dann habe ich versucht Deinen Befehl (set PYTHON=hier/der/Pfad/inkl./der/EXE) mit dem Path zusammenzubringen, aber ich denke da mache ich was falsch. Wenn ich das ausführe kommt eigentlich keine Reaktion...

muss ich mir den Path von den Benutzervariablen holen

C:\Users\stingray29.windows-build-tools\python27\

oder von den Systemvariablen holen?

Stabilostick

Weder noch. Du schaust mit dem Explorer, wo die python.exe liegt und gibst in der administrativen Kommandozeile den entsprechenden set-Befehl ein. Inkl. exe. Und der set Befehl hat (fast) nichts mit der Path-Variablen zu tun.

wolfpack57

o. k., habe ich gemacht…

anschließend neu gestartet und die Installation noch mal versucht:

$ ./iobroker add yahka  --host DESKTOP-SK00CCS
NPM version: 6.4.1
npm install iobroker.yahka --production --save --prefix "C:/iobroker" (System call)
gyp
 ERR! configure error gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.
gyp ERR! stack     at PythonFinder.failNoPython (C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\configure.js:484:19)
gyp ERR! stack     at PythonFinder. <anonymous>(C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\configure.js:509:16)
gyp ERR! stack     at C:\Program Files\nodejs\node_modules\npm\node_modules\graceful-fs\polyfills.js:284:29
gyp ERR! stack     at FSReqWrap.oncomplete (fs.js:152:21)

gyp ERR! System Windows_NT 10.0.17763gyp ERR! command "C:\\Program Files\\nodejs\\node.exe" "C:\\Program Files\\nodejs\\node_modules\\npm\\node_modules\\node-gyp\\bin\\node-gyp.js" "rebuild"
gyp ERR! cwd
 C:\iobroker\node_modules\iobroker.yahka\node_modules\curve25519-ngyp ERR! node -v v8.15.0
gyp ERR! node-gyp -v v3.8.0
gyp
 ERR! not ok 
npm ERR! code ELIFECYCLEnpm ERR! errno 1
npm ERR! curve25519-n@1.4.0 install: `node-gyp rebuild`
npm ERR! Exit status 1
npm ERR! 
npm ERR! Failed at the curve25519-n@1.4.0 install script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:npm ERR!     C:\WINDOWS\system32\config\systemprofile\AppData\Roaming\npm-cache\_logs\2019-02-04T11_36_49_131Z-debug.log

host.DESKTOP-SK00CCS install adapter yahka
NPM version: 6.4.1
npm install iobroker.yahka --production --save --prefix "C:/iobroker" (System call)
gyp
 ERR! configure error 
gyp
 ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.gyp ERR! stack     at PythonFinder.failNoPython (C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\configure.js:484:19)
gyp ERR! stack     at PythonFinder. <anonymous>(C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\configure.js:509:16)
gyp ERR! stack     at C:\Program Files\nodejs\node_modules\npm\node_modules\graceful-fs\polyfills.js:284:29
gyp ERR! stack     at FSReqWrap.oncomplete (fs.js:152:21)

gyp ERR! System Windows_NT 10.0.17763gyp ERR! command "C:\\Program Files\\nodejs\\node.exe" "C:\\Program Files\\nodejs\\node_modules\\npm\\node_modules\\node-gyp\\bin\\node-gyp.js" "rebuild"

gyp ERR! cwd C:\iobroker\node_modules\iobroker.yahka\node_modules\curve25519-ngyp ERR! node -v v8.15.0
gyp ERR! node-gyp -v v3.8.0
gyp ERR!
 not ok 
npm
 ERR! code ELIFECYCLEnpm ERR! errno 1

npm
 ERR! curve25519-n@1.4.0 install: `node-gyp rebuild`npm ERR! Exit status 1
npm ERR! 
npm 
ERR! Failed at the curve25519-n@1.4.0 install script.npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:npm ERR!     C:\WINDOWS\system32\config\systemprofile\AppData\Roaming\npm-cache\_logs\2019-02-04T11_36_56_685Z-debug.log

host.DESKTOP-SK00CCS install adapter yahka
NPM version: 6.4.1
npm install iobroker.yahka --production --save --prefix "C:/iobroker" (System call)
gyp
 ERR! configure error gyp 
ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.gyp ERR! stack     at PythonFinder.failNoPython (C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\configure.js:484:19)
gyp ERR! stack     at PythonFinder. <anonymous>(C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\configure.js:509:16)
gyp ERR! stack     at C:\Program Files\nodejs\node_modules\npm\node_modules\graceful-fs\polyfills.js:284:29
gyp ERR! stack     at FSReqWrap.oncomplete (fs.js:152:21)
gyp ERR!
 System Windows_NT 10.0.17763gyp ERR! command "C:\\Program Files\\nodejs\\node.exe" "C:\\Program Files\\nodejs\\node_modules\\npm\\node_modules\\node-gyp\\bin\\node-gyp.js" "rebuild"
gyp ERR! cwd C:\iobroker\node_modules\iobroker.yahka\node_modules\curve25519-n
gyp ERR! node -v v8.15.0
gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok 

npm
 ERR! code ELIFECYCLEnpm ERR! errno 1

npm ERR! curve25519-n@1.4.0 install: `node-gyp rebuild`npm ERR! Exit status 1

npm ERR! npm ERR! Failed at the curve25519-n@1.4.0 install script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:npm ERR!     C:\WINDOWS\system32\config\systemprofile\AppData\Roaming\npm-cache\_logs\2019-02-04T11_37_05_651Z-debug.log

host.DESKTOP-SK00CCS install adapter yahka
ERROR: host.DESKTOP-SK00CCS Cannot install yahka
ERROR: process exited with code 13</anonymous></anonymous></anonymous>

Im Log meckert jetzt auch node red…

ich glaube, das war vorher nicht...

iobroker	2019-02-04 12:37:05.675	info	exit 13
iobroker	2019-02-04 12:37:05.668	error	host.DESKTOP-SK00CCS Cannot install yahka
iobroker	2019-02-04 12:37:05.667	info	host.DESKTOP-SK00CCS install adapter yahka
iobroker	2019-02-04 12:37:05.656	info	
iobroker	2019-02-04 12:37:05.656	info	npm ERR! A complete log of this run can be found in:npm ERR! C:\WINDOWS\system32\config\systemprofile\AppData\Roaming\npm-cache\_logs\2019-02-04T11_37_05_651Z-debug.log
iobroker	2019-02-04 12:37:05.656	info	
iobroker	2019-02-04 12:37:05.646	info	
iobroker	2019-02-04 12:37:05.646	info	npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
iobroker	2019-02-04 12:37:05.646	info	npm ERR! npm ERR! Failed at the curve25519-n@1.4.0 install script.
iobroker	2019-02-04 12:37:05.646	info	
iobroker	2019-02-04 12:37:05.646	info	npm ERR! curve25519-n@1.4.0 install: `node-gyp rebuild`npm ERR! Exit status 1
iobroker	2019-02-04 12:37:05.645	info	
iobroker	2019-02-04 12:37:05.645	info	ERR! code ELIFECYCLEnpm ERR! errno 1
iobroker	2019-02-04 12:37:05.645	info	npm
iobroker	2019-02-04 12:37:05.524	info	
iobroker	2019-02-04 12:37:05.524	info	gyp ERR! not ok
iobroker	2019-02-04 12:37:05.524	info	gyp ERR! node-gyp -v v3.8.0
iobroker	2019-02-04 12:37:05.524	info	gyp ERR! node -v v8.15.0
iobroker	2019-02-04 12:37:05.524	info	gyp ERR! cwd C:\iobroker\node_modules\iobroker.yahka\node_modules\curve25519-n
iobroker	2019-02-04 12:37:05.524	info	System Windows_NT 10.0.17763gyp ERR! command "C:\\Program Files\\nodejs\\node.exe" "C:\\Program Files\\nodejs\\node_modules\\npm\\node_modules\\node-gyp\\bin\\node-gyp.js" "rebuild"
iobroker	2019-02-04 12:37:05.524	info	gyp ERR!
iobroker	2019-02-04 12:37:05.524	info	gyp ERR! stack at FSReqWrap.oncomplete (fs.js:152:21)
iobroker	2019-02-04 12:37:05.524	info	gyp ERR! stack at C:\Program Files\nodejs\node_modules\npm\node_modules\graceful-fs\polyfills.js:284:29
iobroker	2019-02-04 12:37:05.524	info	gyp ERR! stack at PythonFinder. <anonymous>(C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\configure.js:509:16)
iobroker	2019-02-04 12:37:05.524	info	ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.gyp ERR! stack at PythonFinder.failNoPython (C:\Program Files\nodejs\node_modules\npm\node_modules\nod
iobroker	2019-02-04 12:37:05.524	info	ERR! configure error gyp
iobroker	2019-02-04 12:37:05.524	info	gyp
iobroker	2019-02-04 12:36:57.282	info	npm install iobroker.yahka --production --save --prefix "C:/iobroker" (System call)
iobroker	2019-02-04 12:36:57.282	info	NPM version: 6.4.1
iobroker	2019-02-04 12:36:56.708	info	host.DESKTOP-SK00CCS install adapter yahka
iobroker	2019-02-04 12:36:56.693	info	
iobroker	2019-02-04 12:36:56.693	info	npm ERR! A complete log of this run can be found in:npm ERR! C:\WINDOWS\system32\config\systemprofile\AppData\Roaming\npm-cache\_logs\2019-02-04T11_36_56_685Z-debug.log
iobroker	2019-02-04 12:36:56.693	info	
iobroker	2019-02-04 12:36:56.684	info	
iobroker	2019-02-04 12:36:56.684	info	ERR! Failed at the curve25519-n@1.4.0 install script.npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
iobroker	2019-02-04 12:36:56.684	info	npm
iobroker	2019-02-04 12:36:56.684	info	npm ERR!
iobroker	2019-02-04 12:36:56.684	info	ERR! curve25519-n@1.4.0 install: `node-gyp rebuild`npm ERR! Exit status 1
iobroker	2019-02-04 12:36:56.684	info	npm
iobroker	2019-02-04 12:36:56.683	info	
iobroker	2019-02-04 12:36:56.683	info	ERR! code ELIFECYCLEnpm ERR! errno 1
iobroker	2019-02-04 12:36:56.683	info	npm
iobroker	2019-02-04 12:36:56.573	info	not ok
iobroker	2019-02-04 12:36:56.573	info	gyp ERR!
iobroker	2019-02-04 12:36:56.573	info	gyp ERR! node-gyp -v v3.8.0
iobroker	2019-02-04 12:36:56.573	info	gyp ERR! cwd C:\iobroker\node_modules\iobroker.yahka\node_modules\curve25519-ngyp ERR! node -v v8.15.0
iobroker	2019-02-04 12:36:56.572	info	
iobroker	2019-02-04 12:36:56.572	info	gyp ERR! System Windows_NT 10.0.17763gyp ERR! command "C:\\Program Files\\nodejs\\node.exe" "C:\\Program Files\\nodejs\\node_modules\\npm\\node_modules\\node-gyp\\bin\\node-gyp.js" "rebuild"
iobroker	2019-02-04 12:36:56.572	info	
iobroker	2019-02-04 12:36:56.572	info	gyp ERR! stack at FSReqWrap.oncomplete (fs.js:152:21)
iobroker	2019-02-04 12:36:56.572	info	gyp ERR! stack at C:\Program Files\nodejs\node_modules\npm\node_modules\graceful-fs\polyfills.js:284:29
iobroker	2019-02-04 12:36:56.572	info	gyp ERR! stack at PythonFinder. <anonymous>(C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\configure.js:509:16)
iobroker	2019-02-04 12:36:56.572	info	ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.gyp ERR! stack at PythonFinder.failNoPython (C:\Program Files\nodejs\node_modules\npm\node_modules\no
iobroker	2019-02-04 12:36:56.572	info	gyp
iobroker	2019-02-04 12:36:56.571	info	ERR! configure error
iobroker	2019-02-04 12:36:56.571	info	gyp
iobroker	2019-02-04 12:36:49.767	info	npm install iobroker.yahka --production --save --prefix "C:/iobroker" (System call)
iobroker	2019-02-04 12:36:49.766	info	NPM version: 6.4.1
iobroker	2019-02-04 12:36:49.172	info	host.DESKTOP-SK00CCS install adapter yahka
iobroker	2019-02-04 12:36:49.145	info	
iobroker	2019-02-04 12:36:49.145	info	npm ERR! A complete log of this run can be found in:npm ERR! C:\WINDOWS\system32\config\systemprofile\AppData\Roaming\npm-cache\_logs\2019-02-04T11_36_49_131Z-debug.log
iobroker	2019-02-04 12:36:49.144	info	
iobroker	2019-02-04 12:36:49.129	info	
iobroker	2019-02-04 12:36:49.129	info	npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
iobroker	2019-02-04 12:36:49.129	info	npm ERR! Failed at the curve25519-n@1.4.0 install script.
iobroker	2019-02-04 12:36:49.129	info	npm ERR!
iobroker	2019-02-04 12:36:49.129	info	npm ERR! Exit status 1
iobroker	2019-02-04 12:36:49.129	info	npm ERR! curve25519-n@1.4.0 install: `node-gyp rebuild`
iobroker	2019-02-04 12:36:49.129	info	npm ERR! code ELIFECYCLEnpm ERR! errno 1
iobroker	2019-02-04 12:36:49.018	info	ERR! not ok
iobroker	2019-02-04 12:36:49.017	info	gyp
iobroker	2019-02-04 12:36:49.017	info	gyp ERR! node-gyp -v v3.8.0
iobroker	2019-02-04 12:36:49.017	info	C:\iobroker\node_modules\iobroker.yahka\node_modules\curve25519-ngyp ERR! node -v v8.15.0
iobroker	2019-02-04 12:36:49.017	info	gyp ERR! cwd
iobroker	2019-02-04 12:36:49.017	info	gyp ERR! System Windows_NT 10.0.17763gyp ERR! command "C:\\Program Files\\nodejs\\node.exe" "C:\\Program Files\\nodejs\\node_modules\\npm\\node_modules\\node-gyp\\bin\\node-gyp.js" "rebuild"
iobroker	2019-02-04 12:36:49.017	info	
iobroker	2019-02-04 12:36:49.017	info	gyp ERR! stack at FSReqWrap.oncomplete (fs.js:152:21)
iobroker	2019-02-04 12:36:49.017	info	gyp ERR! stack at C:\Program Files\nodejs\node_modules\npm\node_modules\graceful-fs\polyfills.js:284:29
iobroker	2019-02-04 12:36:49.017	info	gyp ERR! stack at PythonFinder. <anonymous>(C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\configure.js:509:16)
iobroker	2019-02-04 12:36:49.017	info	gyp ERR! stack at PythonFinder.failNoPython (C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\configure.js:484:19)
iobroker	2019-02-04 12:36:49.017	info	ERR! configure error gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.
iobroker	2019-02-04 12:36:49.016	info	gyp
iobroker	2019-02-04 12:36:40.478	info	npm install iobroker.yahka --production --save --prefix "C:/iobroker" (System call)
iobroker	2019-02-04 12:36:39.940	info	NPM version: 6.4.1
iobroker	2019-02-04 12:36:38.916	info	add yahka --host DESKTOP-SK00CCS
info.0	2019-02-04 12:36:38.054	info	starting. Version 1.0.2 in C:/iobroker/node_modules/iobroker.info, node: v8.15.0
host.DESKTOP-SK00CCS	2019-02-04 12:36:37.686	info	instance system.adapter.info.0 started with pid 10824
text2command.1	2019-02-04 12:36:34.122	info	starting. Version 1.2.4 in C:/iobroker/node_modules/iobroker.text2command, node: v8.15.0
host.DESKTOP-SK00CCS	2019-02-04 12:36:33.688	info	instance system.adapter.text2command.1 started with pid 16096
host.DESKTOP-SK00CCS	2019-02-04 12:36:29.686	info	instance scheduled system.adapter.daswetter.1 */15 * * * *
iot.0	2019-02-04 12:36:27.542	info	Connection changed: connect
node-red.0	2019-02-04 12:36:27.441	warn	
node-red.0	2019-02-04 12:36:27.441	warn	4 Feb 12:36:27 - [warn] Projects disabled : set editorTheme.projects.enabled=true to enable
node-red.0	2019-02-04 12:36:27.439	warn	
node-red.0	2019-02-04 12:36:27.439	warn	4 Feb 12:36:27 - [info] Settings file : C:\iobroker\node_modules\iobroker.node-red\userdata\settings.js
node-red.0	2019-02-04 12:36:27.439	warn	4 Feb 12:36:27 - [warn] ------------------------------------------------------
node-red.0	2019-02-04 12:36:27.439	warn	4 Feb 12:36:27 - [warn] [node-red/tail] Not currently supported on Windows.
node-red.0	2019-02-04 12:36:27.439	warn	
node-red.0	2019-02-04 12:36:27.439	warn	4 Feb 12:36:27 - [warn] ------------------------------------------------------
iot.0	2019-02-04 12:36:26.852	info	Connecting with a18wym7vjdl22g.iot.eu-west-1.amazonaws.com
iot.0	2019-02-04 12:36:26.843	info	starting. Version 0.2.2 in C:/iobroker/node_modules/iobroker.iot, node: v8.15.0
node-red.0	2019-02-04 12:36:26.129	warn	
node-red.0	2019-02-04 12:36:26.129	warn	4 Feb 12:36:26 - [warn] rpi-gpio : Raspberry Pi specific node set inactive</anonymous></anonymous></anonymous>

Stabilostick

Was sagt

npm config list -ls

?

wolfpack57

Stabilostick

Öhem, das sieht, obwohl es nicht funktioniert, gut aus. Du hast im npm eine Konfiguration zu Python stehen, die identisch ist mit der Umgebungsvariable….

Was sagt „where python.exe“ in der Kommandozeile?

Nächster Versuch:

Stoppe den iobroker-Dienst. Starte in einer neuen administrativen Kommandozeile ioBroker im iobroker-Verzeichnis mit „iobroker start“. Öffnen sich mehrere schwarze Fenster? Mache dann den Admin im Webbrowser auf. Klappt jetzt das hinzufügen von yahka? Kommt wieder die gleiche Fehlermeldung, das Python nicht gefunden werden kann?

wolfpack57

soweit so gut

Stabilostick

Passt. Und was macht der von Kommandozeile aus gestartete ioBroker?

wolfpack57

also…

ich habe über den Task Manager den Dienst gestoppt...

dann als Administrator das neue Fenster cmd geöffnet und wie folgt neu gestartet...

es hat sich dann aber kein weiteres Fenster geöffnet.

Anschließend den Adapter wieder versucht zu installieren:

wie immer

$ ./iobroker add yahka  --host DESKTOP-SK00CCS
NPM version: 6.4.1
npm install iobroker.yahka --production --save --prefix "C:/iobroker" (System call)
gyp
 ERR! configure error gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.
gyp ERR! stack     at PythonFinder.failNoPython (C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\configure.js:484:19)
gyp ERR! stack     at PythonFinder. <anonymous>(C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\configure.js:509:16)
gyp ERR! stack     at C:\Program Files\nodejs\node_modules\npm\node_modules\graceful-fs\polyfills.js:284:29
gyp ERR! stack     at FSReqWrap.oncomplete (fs.js:152:21)

gyp 
ERR! System Windows_NT 10.0.17763gyp ERR! command "C:\\Program Files\\nodejs\\node.exe" "C:\\Program Files\\nodejs\\node_modules\\npm\\node_modules\\node-gyp\\bin\\node-gyp.js" "rebuild"
gyp ERR! cwd C:\iobroker\node_modules\iobroker.yahka\node_modules\curve25519-n
gyp ERR! node -v v8.15.0
gyp ERR!
 node-gyp -v v3.8.0gyp ERR! not ok 

npm
 ERR! code ELIFECYCLEnpm ERR! errno 1

npm
 ERR! curve25519-n@1.4.0 install: `node-gyp rebuild`npm ERR! Exit status 1
npm ERR! 
npm ERR!
 Failed at the curve25519-n@1.4.0 install script.npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:npm ERR!     C:\WINDOWS\system32\config\systemprofile\AppData\Roaming\npm-cache\_logs\2019-02-04T15_17_39_048Z-debug.log

host.DESKTOP-SK00CCS install adapter yahka
NPM version: 6.4.1
npm install iobroker.yahka --production --save --prefix "C:/iobroker" (System call)
gyp
 ERR! configure error 
gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.gyp ERR! stack     at PythonFinder.failNoPython (C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\configure.js:484:19)
gyp ERR! stack     at PythonFinder. <anonymous>(C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\configure.js:509:16)

gyp ERR! 
stack     at C:\Program Files\nodejs\node_modules\npm\node_modules\graceful-fs\polyfills.js:284:29gyp ERR! stack     at FSReqWrap.oncomplete (fs.js:152:21)
gyp 
ERR! System Windows_NT 10.0.17763gyp ERR! command
 "C:\\Program Files\\nodejs\\node.exe" "C:\\Program Files\\nodejs\\node_modules\\npm\\node_modules\\node-gyp\\bin\\node-gyp.js" "rebuild"gyp ERR! cwd C:\iobroker\node_modules\iobroker.yahka\node_modules\curve25519-n
gyp
 ERR! node -v v8.15.0gyp ERR! node-gyp -v v3.8.0
gyp 
ERR! not ok 
npm
 ERR! code ELIFECYCLEnpm ERR! errno 1

npm
 ERR! curve25519-n@1.4.0 install: `node-gyp rebuild`npm ERR! Exit status 1
npm ERR! 
npm ERR!
 Failed at the curve25519-n@1.4.0 install script.npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:npm ERR!     C:\WINDOWS\system32\config\systemprofile\AppData\Roaming\npm-cache\_logs\2019-02-04T15_17_47_517Z-debug.log

host.DESKTOP-SK00CCS install adapter yahka
NPM version: 6.4.1
npm install iobroker.yahka --production --save --prefix "C:/iobroker" (System call)
gyp
 ERR! configure error 
gyp
 ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.gyp ERR! stack     at PythonFinder.failNoPython (C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\configure.js:484:19)
gyp ERR! stack     at PythonFinder. <anonymous>(C:\Program Files\nodejs\node_modules\npm\node_modules\node-gyp\lib\configure.js:509:16)
gyp ERR! stack     at C:\Program Files\nodejs\node_modules\npm\node_modules\graceful-fs\polyfills.js:284:29
gyp ERR! stack     at FSReqWrap.oncomplete (fs.js:152:21)

gyp ERR! System Windows_NT 10.0.17763
gyp ERR! command "C:\\Program Files\\nodejs\\node.exe" "C:\\Program Files\\nodejs\\node_modules\\npm\\node_modules\\node-gyp\\bin\\node-gyp.js" "rebuild"gyp ERR! cwd C:\iobroker\node_modules\iobroker.yahka\node_modules\curve25519-n
gyp ERR! node -v v8.15.0
gyp ERR! node-gyp -v v3.8.0
gyp ERR!
 not ok 
npm
 ERR! code ELIFECYCLEnpm ERR! errno 1

npm
 ERR! curve25519-n@1.4.0 install: `node-gyp rebuild`npm ERR! Exit status 1
npm ERR! 
npm 
ERR! Failed at the curve25519-n@1.4.0 install script.npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:npm ERR!     C:\WINDOWS\system32\config\systemprofile\AppData\Roaming\npm-cache\_logs\2019-02-04T15_17_57_512Z-debug.log

host.DESKTOP-SK00CCS install adapter yahka
ERROR: host.DESKTOP-SK00CCS Cannot install yahka
ERROR: process exited with code 13</anonymous></anonymous></anonymous>

Stabilostick

Ok, dann lasse den ioBroker als Dienst weiter laufen.

Jetzt in der als Admin gestarteten Kommandozeile den Befehl

npm install iobroker.yahka --production --save

eingeben. Gleicher Fehler? Bring „echo %python%“ etwas?

Community Forum

NEWS

[gelöst] Windows 7 Fehler bei Installation von YAHKA

Support us

480

32.7k

82.6k

1.3m