[GELÖST] HILFE - Nach update js-controller nicht installierbar

Hans

leider kein Erfolg Georgius.

Hat jemand ansonsten noch eine Idee?

Ansonsten könnte ich auch den iobroker neu aufsetzten und das backup einspielen.

Könnte mir jemand sagen, wie das dann funktioniert?

Am liebsten würde ich natürlich diese Installation retten :?

Georgius

Anleitung von Github

https://github.com/simatec/ioBroker.bac … ackitup.md

Hans

Das Backup einspielen ansich ist nicht das Problem. Aber wie installiere ich iobroker auf dem Pi?

Ich hatte damals ein "All-In-One" Paket installiert.

Aber es muss doch trotzdem eine Möglichkeit geben, irgendwie mein Problem in den Griff zu bekommen?

Hans

Hilft das evtl. jemanden weiter? :idea:

! ````
pi@Raspberry:/opt/iobroker $ systemctl status iobroker.service
● iobroker.service - LSB: starts ioBroker
Loaded: loaded (/etc/init.d/iobroker.sh; generated; vendor preset: enabled)
Active: failed (Result: exit-code) since Mon 2018-12-31 16:53:58 CET; 47s ago
Docs: man:systemd-sysv-generator(8)
Process: 1318 ExecStart=/etc/init.d/iobroker.sh start (code=exited, status=1/FAILURE)
CPU: 296ms
! Dez 31 16:53:58 Raspberry iobroker.sh[1318]: at Function.Module._resolveFilename (module
Dez 31 16:53:58 Raspberry iobroker.sh[1318]: at Function.Module._load (module.js:474:25)
Dez 31 16:53:58 Raspberry iobroker.sh[1318]: at Function.Module.runMain (module.js:693:1
Dez 31 16:53:58 Raspberry iobroker.sh[1318]: at startup (bootstrap_node.js:188:16)
Dez 31 16:53:58 Raspberry iobroker.sh[1318]: at bootstrap_node.js:609:3
Dez 31 16:53:58 Raspberry sudo[1319]: pam_unix(sudo:session): session closed for user root
Dez 31 16:53:58 Raspberry systemd[1]: iobroker.service: Control process exited, code=exited
Dez 31 16:53:58 Raspberry systemd[1]: Failed to start LSB: starts ioBroker.
Dez 31 16:53:58 Raspberry systemd[1]: iobroker.service: Unit entered failed state.
Dez 31 16:53:58 Raspberry systemd[1]: iobroker.service: Failed with result 'exit-code'.
lines 1-17/17 (END)
! pi@Raspberry:/opt/iobroker $ journalctl -xe
--
-- Unit iobroker.service has begun starting up.
Dez 31 16:53:57 Raspberry sudo[1319]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/
Dez 31 16:53:57 Raspberry sudo[1319]: pam_unix(sudo:session): session opened for user root b
Dez 31 16:53:58 Raspberry iobroker.sh[1318]: Starting ioBrokermodule.js:549
Dez 31 16:53:58 Raspberry iobroker.sh[1318]: throw err;
Dez 31 16:53:58 Raspberry iobroker.sh[1318]: ^
Dez 31 16:53:58 Raspberry iobroker.sh[1318]: Error: Cannot find module '/opt/iobroker/node_m
Dez 31 16:53:58 Raspberry iobroker.sh[1318]: at Function.Module._resolveFilename (module
Dez 31 16:53:58 Raspberry iobroker.sh[1318]: at Function.Module._load (module.js:474:25)
Dez 31 16:53:58 Raspberry iobroker.sh[1318]: at Function.Module.runMain (module.js:693:1
Dez 31 16:53:58 Raspberry iobroker.sh[1318]: at startup (bootstrap_node.js:188:16)
Dez 31 16:53:58 Raspberry iobroker.sh[1318]: at bootstrap_node.js:609:3
Dez 31 16:53:58 Raspberry sudo[1319]: pam_unix(sudo:session): session closed for user root
Dez 31 16:53:58 Raspberry sudo[1312]: pam_unix(sudo:session): session closed for user root
Dez 31 16:53:58 Raspberry systemd[1]: iobroker.service: Control process exited, code=exited
Dez 31 16:53:58 Raspberry systemd[1]: Failed to start LSB: starts ioBroker.
-- Subject: Unit iobroker.service has failed
-- Defined-By: systemd
-- Support: https://www.debian.org/support
--
-- Unit iobroker.service has failed.
--
-- The result is failed.
Dez 31 16:53:58 Raspberry systemd[1]: iobroker.service: Unit entered failed state.
Dez 31 16:53:58 Raspberry systemd[1]: iobroker.service: Failed with result 'exit-code'.
lines 1492-1517/1517 (END)


Edit by eric2905, Logs & Co. bitte immer in Code- und ggf. Spoiler-Tags setzen

Georgius

Ich würde es neu machen. Gibt eh eine Anleitung im Forum.

Kostet mit einem Backup weniger Zeit als die Fehlersuche.

Hatte mit einem fertigen Image auch nur Probleme. Wenn alles funktioniert ist es super, aber wehe es spinnt.

Hans

Danke Dir!

Hast Du evtl den link zur Anleitung?

Guten Rutsch!!!

Georgius

Ist in jedem Forum als 4. Thread angepinnt. viewtopic.php?f=8&t=19111

Alte Weisheit: "Willst Du was verstecken pinne es an" ;)

Hans

Hallo zusammen und ein Frohes neues Jahr !!!

Ich konnte den js-controller mit diesem Befehl wieder installieren und iobroker wieder zum laufen bringen :D

sudo npm install iobroker.js-controller –unsafe-perm

Jetzt habe ich nur noch das Problem, dass ja mein eigentliches Ziel war, iobroker auf eine neuere Version zu updaten.

Wo alles wieder funktioniert, habe ich leider immer noch die alter Ansicht, obwohl das update anscheinend funktioniert hat s.u.

Kann man irgendwo die Ansicht umstellen?

Nachher:

pi@Raspberry:/opt/iobroker $ node -v

v8.15.0

pi@Raspberry:/opt/iobroker $ npm -v

6.4.1

Vorher:

pi@Raspberry:/opt/iobroker $ node -v

v8.11.1

pi@Raspberry:/opt/iobroker $ npm -v

5.8.0

10144_bildschirmfoto_2019-01-01_um_11.56.16.png

paul53

~~@Hans:~~

habe ich leider immer noch die alter Ansicht `
Die Ansicht wird durch den Admin-Adapter bestimmt. Deiner hat noch Version 2.0.9.

Hans

Top, Danke! :D

Glarios

Ich habe genau des gleiche Problem nach einem Update von Node.js. Bei mir läuft leider der unsafe Befehl nicht:


pi@ioBroker-RasPi:/opt/iobroker $ sudo npm install iobroker.js-controller –unsafe-perm
npm ERR! code EINVALIDTAGNAME
npm ERR! Invalid tag name "–unsafe-perm": Tags may not have any characters that encodeURIComponent encodes.

npm ERR! A complete log of this run can be found in:
npm ERR!     /root/.npm/_logs/2019-09-01T14_48_36_805Z-debug.log

Hat jemand eine Idee?

Glarios

Ich habe jetzt mal einfach nur -unsafe ausprobiert. Ergebnis aber wie vorher ohne diese Zusatz:

pi@ioBroker-RasPi:/opt/iobroker $ sudo npm install iobroker.js-controller unsafe

> iobroker.js-controller@1.5.14 preinstall /opt/iobroker/node_modules/iobroker.js-controller
> node lib/preinstallCheck.js

NPM version: 6.9.0
npm version >= 5: disabling package-lock

> serialport@4.0.7 install /opt/iobroker/node_modules/serialport
> node-pre-gyp install --fallback-to-build

node-pre-gyp info it worked if it ends with ok
node-pre-gyp verb cli [ '/usr/bin/node',
node-pre-gyp verb cli   '/opt/iobroker/node_modules/serialport/node_modules/.bin/node-pre-gyp',
node-pre-gyp verb cli   'install',
node-pre-gyp verb cli   '--fallback-to-build' ]
node-pre-gyp info using node-pre-gyp@0.6.32
node-pre-gyp info using node@10.16.3 | linux | arm
node-pre-gyp verb command install []
node-pre-gyp info check checked for "/opt/iobroker/node_modules/serialport/build/Release/serialport.node" (not found)
node-pre-gyp http GET https://github.com/EmergingTechnologyAdvisors/node-serialport/releases/download/4.0.7/serialport-                                                                      v4.0.7-node-v64-linux-arm.tar.gz
node-pre-gyp ERR! Tried to download(undefined): https://github.com/EmergingTechnologyAdvisors/node-serialport/releases/                                                                      download/4.0.7/serialport-v4.0.7-node-v64-linux-arm.tar.gz
node-pre-gyp ERR! Pre-built binaries not found for serialport@4.0.7 and node@10.16.3 (node-v64 ABI) (falling back to so                                                                      urce compile with node-gyp)
node-pre-gyp http EACCES: permission denied, mkdir '/opt/iobroker/node_modules/serialport/build'
node-pre-gyp verb command build [ 'rebuild' ]
node-pre-gyp http 404 https://github.com/EmergingTechnologyAdvisors/node-serialport/releases/download/4.0.7/serialport-                                                                      v4.0.7-node-v64-linux-arm.tar.gz
node-pre-gyp ERR! Tried to download(404): https://github.com/EmergingTechnologyAdvisors/node-serialport/releases/downlo                                                                      ad/4.0.7/serialport-v4.0.7-node-v64-linux-arm.tar.gz
node-pre-gyp ERR! Pre-built binaries not found for serialport@4.0.7 and node@10.16.3 (node-v64 ABI) (falling back to so                                                                      urce compile with node-gyp)
node-pre-gyp http 404 status code downloading tarball https://github.com/EmergingTechnologyAdvisors/node-serialport/rel                                                                      eases/download/4.0.7/serialport-v4.0.7-node-v64-linux-arm.tar.gz
node-pre-gyp verb command build [ 'rebuild' ]
node-pre-gyp ERR! Tried to download(undefined): https://github.com/EmergingTechnologyAdvisors/node-serialport/releases/                                                                      download/4.0.7/serialport-v4.0.7-node-v64-linux-arm.tar.gz
node-pre-gyp ERR! Pre-built binaries not found for serialport@4.0.7 and node@10.16.3 (node-v64 ABI) (falling back to so                                                                      urce compile with node-gyp)
node-pre-gyp http Connection closed while downloading tarball file
node-pre-gyp verb command build [ 'rebuild' ]
gyp WARN EACCES user "root" does not have permission to access the dev dir "/root/.node-gyp/10.16.3"
gyp WARN EACCES attempting to reinstall using temporary dev dir "/tmp/.node-gyp"
gyp ERR! configure error
gyp ERR! stack Error: EACCES: permission denied, mkdir '/opt/iobroker/node_modules/serialport/build'
gyp ERR! System Linux 4.19.66-v7+
gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "configure" "--fallb                                                                      ack-to-build" "--module=/opt/iobroker/node_modules/serialport/build/Release/serialport.node" "--module_name=serialport"                                                                       "--module_path=/opt/iobroker/node_modules/serialport/build/Release"
gyp ERR! cwd /opt/iobroker/node_modules/serialport
gyp ERR! node -v v10.16.3
gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok
node-pre-gyp ERR! build error
node-pre-gyp ERR! stack Error: Failed to execute '/usr/bin/node /usr/lib/node_modules/npm/node_modules/node-gyp/bin/nod                                                                      e-gyp.js configure --fallback-to-build --module=/opt/iobroker/node_modules/serialport/build/Release/serialport.node --m                                                                      odule_name=serialport --module_path=/opt/iobroker/node_modules/serialport/build/Release' (1)
node-pre-gyp ERR! stack     at ChildProcess.<anonymous> (/opt/iobroker/node_modules/serialport/node_modules/node-pre-gy                                                                      p/lib/util/compile.js:83:29)
node-pre-gyp ERR! stack     at ChildProcess.emit (events.js:198:13)
node-pre-gyp ERR! stack     at maybeClose (internal/child_process.js:982:16)
node-pre-gyp ERR! stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:259:5)
node-pre-gyp ERR! System Linux 4.19.66-v7+
node-pre-gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/serialport/node_modules/.bin/node-pre-gyp" "insta                                                                      ll" "--fallback-to-build"
node-pre-gyp ERR! cwd /opt/iobroker/node_modules/serialport
node-pre-gyp ERR! node -v v10.16.3
node-pre-gyp ERR! node-pre-gyp -v v0.6.32
node-pre-gyp ERR! not ok
Failed to execute '/usr/bin/node /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js configure --fallback-t                                                                      o-build --module=/opt/iobroker/node_modules/serialport/build/Release/serialport.node --module_name=serialport --module_                                                                      path=/opt/iobroker/node_modules/serialport/build/Release' (1)

> iobroker.js-controller@1.5.14 install /opt/iobroker/node_modules/iobroker.js-controller
> node iobroker.js setup first

gyp WARN EACCES user "root" does not have permission to access the dev dir "/root/.node-gyp/10.16.3"
gyp WARN EACCES attempting to reinstall using temporary dev dir "/tmp/.node-gyp"
gyp ERR! configure error
gyp ERR! stack Error: EACCES: permission denied, mkdir '/opt/iobroker/node_modules/serialport/build'
gyp ERR! System Linux 4.19.66-v7+
gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "configure" "--fallb                                                                      ack-to-build" "--module=/opt/iobroker/node_modules/serialport/build/Release/serialport.node" "--module_name=serialport"                                                                       "--module_path=/opt/iobroker/node_modules/serialport/build/Release"
gyp ERR! cwd /opt/iobroker/node_modules/serialport
gyp ERR! node -v v10.16.3
gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok
gyp WARN EACCES user "root" does not have permission to access the dev dir "/root/.node-gyp/10.16.3"
gyp WARN EACCES attempting to reinstall using temporary dev dir "/tmp/.node-gyp"
gyp ERR! configure error
gyp ERR! stack Error: EACCES: permission denied, mkdir '/opt/iobroker/node_modules/serialport/build'
gyp ERR! System Linux 4.19.66-v7+
gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "configure" "--fallb                                                                      ack-to-build" "--module=/opt/iobroker/node_modules/serialport/build/Release/serialport.node" "--module_name=serialport"                                                                       "--module_path=/opt/iobroker/node_modules/serialport/build/Release"
gyp ERR! cwd /opt/iobroker/node_modules/serialport
gyp ERR! node -v v10.16.3
gyp ERR! node-gyp -v v3.8.0
gyp ERR! not ok
Cannot delete file. Not critical: Error: EACCES: permission denied, unlink '/opt/iobroker/node_modules/iobroker.js-cont                                                                      roller/lib/setup/../../_service_iobroker.bat'
Cannot delete file. Not critical: Error: EACCES: permission denied, unlink '/opt/iobroker/node_modules/iobroker.js-cont                                                                      roller/lib/setup/../../iobroker.bat'
fs.js:114
    throw err;
    ^

Error: EACCES: permission denied, mkdir '/opt/iobroker/node_modules/iobroker.js-controller/lib/setup/../../tmp'
    at Object.mkdirSync (fs.js:757:3)
    at Setup.setup (/opt/iobroker/node_modules/iobroker.js-controller/lib/setup/setupSetup.js:189:58)
    at /opt/iobroker/node_modules/iobroker.js-controller/lib/setup.js:653:27
    at processCommand (/opt/iobroker/node_modules/iobroker.js-controller/lib/setup.js:691:15)
    at Object.module.exports.execute (/opt/iobroker/node_modules/iobroker.js-controller/lib/setup.js:3193:5)
    at Object.<anonymous> (/opt/iobroker/node_modules/iobroker.js-controller/iobroker.js:1:38)
    at Module._compile (internal/modules/cjs/loader.js:778:30)
    at Object.Module._extensions..js (internal/modules/cjs/loader.js:789:10)
    at Module.load (internal/modules/cjs/loader.js:653:32)
    at tryModuleLoad (internal/modules/cjs/loader.js:593:12)
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: serialport@4.0.7 (node_modules/serialport):
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: serialport@4.0.7 install: `node-pre-gyp install --fallback-to-build`
npm WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1

npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! iobroker.js-controller@1.5.14 install: `node iobroker.js setup first`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the iobroker.js-controller@1.5.14 install script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

npm ERR! A complete log of this run can be found in:
npm ERR!     /root/.npm/_logs/2019-09-01T14_57_46_659Z-debug.log

Ist da noch etwas zu retten, oder muss ich alles neu aufsetzen? :(

Community Forum

NEWS

[GELÖST] HILFE - Nach update js-controller nicht installierbar

Support us

801

32.5k

81.7k

1.3m