RFLink - RAWDATA
-
Hallo,
ich habe jetzt die Admin 1.6.10 drauf. Mir ist aufgefallen, ich kann jetzt bei RAW-Data unter Objekte nichts mehr reinschreiben. Vorher ging das.
Selbst mit der neuen RFLink-Version aus dem Git kann ich die Klingel nicht steuern. :cry:
Gruß Marco
-
Hallo,
ich habe jetzt die Admin 1.6.10 drauf. Mir ist aufgefallen, ich kann jetzt bei RAW-Data unter Objekte nichts mehr reinschreiben. Vorher ging das.
Selbst mit der neuen RFLink-Version aus dem Git kann ich die Klingel nicht steuern. :cry:
Gruß Marco `
Debug output? -
rflink.0 2017-01-12 11:42:58.427 error already running rflink.0 2017-01-12 11:42:58.082 debug statesDB connected rflink.0 2017-01-12 11:42:57.998 debug objectDB connected rflink.0 2017-01-12 11:42:50.271 info done rflink.0.channels.Byron_1 rflink.0 2017-01-12 11:42:50.221 debug Set state "rflink.0.channels.Byron_1.SWITCH_01": true rflink.0 2017-01-12 11:42:50.190 info Add rflink.0.channels.Byron_1.SWITCH_01 rflink.0 2017-01-12 11:42:50.088 debug Set state "rflink.0.channels.Byron_1.CHIME_01": 1 rflink.0 2017-01-12 11:42:50.065 info Add rflink.0.channels.Byron_1.CHIME_01 rflink.0 2017-01-12 11:42:49.965 info Add rflink.0.channels.Byron_1 rflink.0 2017-01-12 11:42:49.716 debug Serial data received: 20;01;Byron;ID=0097;SWITCH=01;CMD=ON;CHIME=01; rflink.0 2017-01-12 11:42:43.591 debug stateChange rflink.0.inclusionOn {"val":true,"ack":false,"ts":1484217763574,"q":0,"from":"system.adapter.admin.0","lc":1484217763574} rflink.0 2017-01-12 11:42:42.565 debug sendTo "listUart" to system.adapter.admin.0 from system.adapter.rflink.0 rflink.0 2017-01-12 11:42:42.562 info List of port: [{"comName":"/dev/ttyAMA0"},{"comName":"/dev/ttyUSB0","manufacturer":"1a86","serialNumber":"1a86_USB2.0-Serial","pnpId":"usb-1a86_USB2.0-Serial-if00-port0","vendorId":"0x1a86","productI rflink.0 2017-01-12 11:42:42.547 debug sendTo "listUart" to system.adapter.admin.0 from system.adapter.rflink.0 rflink.0 2017-01-12 11:42:42.540 info List of port: [{"comName":"/dev/ttyAMA0"},{"comName":"/dev/ttyUSB0","manufacturer":"1a86","serialNumber":"1a86_USB2.0-Serial","pnpId":"usb-1a86_USB2.0-Serial-if00-port0","vendorId":"0x1a86","productI rflink.0 2017-01-12 11:42:24.439 debug Skip frame: 20;00;Nodo RadioFrequencyLink - RFLink Gateway V1.1 - R45; rflink.0 2017-01-12 11:42:24.409 debug Serial data received: 20;00;Nodo RadioFrequencyLink - RFLink Gateway V1.1 - R45; rflink.0 2017-01-12 11:42:24.399 info Connected rflink.0 2017-01-12 11:42:24.099 error already running rflink.0 2017-01-12 11:42:23.476 debug Send raw data: 10;REBOOT;] -
Ich habe jetzt nochmal alles neu angelernt.
Originaler Klingelknopf: Beide Stationen klingeln.
in RFLink ausgelöst: Eine Station klingelt. :?: :roll:
inMem 2017-01-12 11:57:06.669 debug message rflink.0.* rflink.0.rawData val=20;17;OK; , ack=true, ts=1484218626644, q=0, from=system.adapter.rflink.0, lc=1484218626644 rflink.0 2017-01-12 11:57:06.597 debug Skip frame: 20;17;OK; rflink.0 2017-01-12 11:57:06.593 debug Serial data received: 20;17;OK; rflink.0 2017-01-12 11:57:06.037 debug Send raw data: 10;Byron;000097;01;ON; rflink.0 2017-01-12 11:57:06.036 debug Write: 10;Byron;000097;01;ON; rflink.0 2017-01-12 11:57:06.034 debug stateChange rflink.0.channels.Byron_1.CHIME_01 {"val":1,"ack":false,"ts":1484218626017,"q":0,"from":"system.adapter.admin.0","lc":1484217770097} -
rflink.0 2017-01-12 11:42:58.427 error already running rflink.0 2017-01-12 11:42:58.082 debug statesDB connected rflink.0 2017-01-12 11:42:57.998 debug objectDB connected rflink.0 2017-01-12 11:42:50.271 info done rflink.0.channels.Byron_1 rflink.0 2017-01-12 11:42:50.221 debug Set state "rflink.0.channels.Byron_1.SWITCH_01": true rflink.0 2017-01-12 11:42:50.190 info Add rflink.0.channels.Byron_1.SWITCH_01 rflink.0 2017-01-12 11:42:50.088 debug Set state "rflink.0.channels.Byron_1.CHIME_01": 1 rflink.0 2017-01-12 11:42:50.065 info Add rflink.0.channels.Byron_1.CHIME_01 rflink.0 2017-01-12 11:42:49.965 info Add rflink.0.channels.Byron_1 rflink.0 2017-01-12 11:42:49.716 debug Serial data received: 20;01;Byron;ID=0097;SWITCH=01;CMD=ON;CHIME=01; rflink.0 2017-01-12 11:42:43.591 debug stateChange rflink.0.inclusionOn {"val":true,"ack":false,"ts":1484217763574,"q":0,"from":"system.adapter.admin.0","lc":1484217763574} rflink.0 2017-01-12 11:42:42.565 debug sendTo "listUart" to system.adapter.admin.0 from system.adapter.rflink.0 rflink.0 2017-01-12 11:42:42.562 info List of port: [{"comName":"/dev/ttyAMA0"},{"comName":"/dev/ttyUSB0","manufacturer":"1a86","serialNumber":"1a86_USB2.0-Serial","pnpId":"usb-1a86_USB2.0-Serial-if00-port0","vendorId":"0x1a86","productI rflink.0 2017-01-12 11:42:42.547 debug sendTo "listUart" to system.adapter.admin.0 from system.adapter.rflink.0 rflink.0 2017-01-12 11:42:42.540 info List of port: [{"comName":"/dev/ttyAMA0"},{"comName":"/dev/ttyUSB0","manufacturer":"1a86","serialNumber":"1a86_USB2.0-Serial","pnpId":"usb-1a86_USB2.0-Serial-if00-port0","vendorId":"0x1a86","productI rflink.0 2017-01-12 11:42:24.439 debug Skip frame: 20;00;Nodo RadioFrequencyLink - RFLink Gateway V1.1 - R45; rflink.0 2017-01-12 11:42:24.409 debug Serial data received: 20;00;Nodo RadioFrequencyLink - RFLink Gateway V1.1 - R45; rflink.0 2017-01-12 11:42:24.399 info Connected rflink.0 2017-01-12 11:42:24.099 error already running rflink.0 2017-01-12 11:42:23.476 debug Send raw data: 10;REBOOT;] ```` `Das ist aber debug Output, von start. Ich sehe aber nicht, wie du versuchst rawData zu beschreiben.
-
Ich krame den alten Thread nochmal vor.
Ich habe auch eine Byron Türklingel. Eigentlich brauche ich nur die Status Änderung beim Klingel, damit ich diesen Status dazu benutzen kann um im VIS auf das Bild mit den Webcams umzuschalten.
Blöder Weise ist bei mir der Status der Klingel immer "True", egal ob geklingel wird oder nicht. Kann ich da irgendwie den Status abgreifen?
Da man diese Klingeln offensichtlich auch über ioB antriggern kann, gleich meine nächste blöde Frage - geht das mit der hier auch? Brauch ich eigentlich nicht, wäre halt interessant zu wissen.
Ich stehe mit rflink noch am Fuße des Berges. Vielen Dank für die Unterstützung.
Der unter Teil vom Log stammt vom RFlinkLoader
! rflink.0 2018-12-25 20:02:52.389 debug system.adapter.admin.0: logging true
! rflink.0 2018-12-25 20:02:30.139 debug Set state "rflink.0.channels.Byron_1.CHIME_05": 5
! rflink.0 2018-12-25 20:02:30.139 debug Set state "rflink.0.channels.Byron_1.SWITCH_05": true
! rflink.0 2018-12-25 20:02:30.123 debug Serial data received: 20;01;Byron;ID=0097;SWITCH=05;CMD=ON;CHIME=05;
! rflink.0 2018-12-25 20:02:07.639 debug sendTo "readNewVersion" to system.adapter.admin.0 from system.adapter.rflink.0
! rflink.0 2018-12-25 20:02:07.530 debug sendTo "listUart" to system.adapter.admin.0 from system.adapter.rflink.0
! rflink.0 2018-12-25 20:02:07.514 info List of port: [{"comName":"COM1","manufacturer":"(Standardanschlusstypen)","pnpId":"ACPI\PNP0501\1"},{"comName":"COM3","manufacturer":"wch.cn","serialNumber":"5&28b2efbf&0&2","pnpId":"USB\VID_1A86
! rflink.0 2018-12-25 20:02:00.514 debug Skip frame: 20;00;Nodo RadioFrequencyLink - RFLink Gateway V1.1 - R48;
! rflink.0 2018-12-25 20:02:00.514 debug Serial data received: 20;00;Nodo RadioFrequencyLink - RFLink Gateway V1.1 - R48;
! rflink.0 2018-12-25 20:02:00.514 info Connected
! rflink.0 2018-12-25 20:01:59.592 debug Send raw data: 10;REBOOT;
! rflink.0 2018-12-25 20:01:59.592 info Serial port opened
! rflink.0 2018-12-25 20:01:59.530 info starting. Version 1.2.0 in C:/ioBroker/node_modules/iobroker.rflink, node: v8.13.0
! rflink.0 2018-12-25 20:01:59.342 debug statesDB connected
! rflink.0 2018-12-25 20:01:59.326 debug objectDB connected
! 20;00;Nodo RadioFrequencyLink - RFLink Gateway V1.1 - R48;
! 10;version;
! 20;01;VER=1.1;REV=48;BUILD=04;
! 10;status;
! 20;02;STATUS;setRF433=ON;setNodoNRF=OFF;setMilight=OFF;setLivingColors=OFF;setAnsluta=OFF;setGPIO=OFF;setBLE=OFF;setMysensors=OFF;
! 10;rfdebug=on;
! 20;03;RFDEBUG=ON;
! 20;04;DEBUG;Pulses=24;Pulses(uSec)=780,300,720,300,720,300,720,300,720,300,720,300,720,300,720,300,720,300,720,300,240,780,240,540;
! 20;05;DEBUG;Pulses=62;Pulses(uSec)=300,780,720,300,240,780,720,300,720,300,240,780,720,300,720,300,720,300,720,300,240,780,240,780,240,780,720,300,720,300,240,780,240,780,240,780,240,780,720,300,240,780,240,780,720,300,240,780,240,780,240,780,240,780,240,780,240,780,720,300,240,6990;
! 20;06;DEBUG;Pulses=511;Pulses(uSec)=330,570,270,240,600,240,600,570,270,240,600,570,240,570,270,570,270,240,600,570,270,240,600,570,240,5070,270,570,270,240,600,240,600,570,270,240,600,570,270,570,270,570,270,240,600,570,270,240,600,570,240,5070,270,570,270,240,600,240,600,570,270,240,600,570,270,570,270,570,270,240,600,570,270,240,600,570,240,5070,240,570,270,240,600,240,600,570,270,240,600,570,270,570,270,570,270,240,600,570,270,240,600,570,240,5070,270,570,270,240,600,240,600,570,270,240,600,570,270,570,270,570,270,240,600,570,270,240,600,570,240,5070,240,570,270,240,600,240,600,570,270,240,600,570,270,570,270,570,270,240,600,570,270,240,600,570,240,5070,270,570,270,240,600,240,600,570,270,240,600,570,270,570,270,570,270,240,600,570,270,240,600,570,240,5100,240,570,270,240,600,240,600,570,270,240,600,570,270,570,270,570,270,240,600,570,270,240,600,570,240,5100,270,570,270,240,600,240,600,570,270,240,600,570,270,570,270,570,270,240,600,570,270,240,600,570,240,5100,270,570,270,240,600,240,600,570,270,240,600,570,270,570,270,570,270,240,600,570,270,240,600,570,240,5100,270,570,270,240,600,240,600,570,270,240,600,570,270,570,270,570,270,240,600,570,270,240,600,570,240,5070,270,570,270,240,600,240,600,570,270,240,600,570,270,570,270,570,270,240,600,570,270,240,600,570,240,5070,270,570,270,240,600,240,600,570,270,240,600,570,270,570,270,570,270,240,600,570,270,240,600,570,240,5100,270,570,270,240,600,240,600,570,270,240,600,570,270,570,270,570,270,240,600,570,270,240,600,570,240,5100,240,570,270,240,600,240,600,570,270,240,600,570,270,570,270,570,270,240,600,570,270,240,600,570,240,5070,270,570,270,240,600,240,600,570,270,240,600,570,270,570,270,570,270,240,600,570,270,240,600,570,240,5070,240,570,240,240,600,240,600,570,270,240,600,570,270,570,270,570,270,240,600,570,270,240,600,570,240,5070,270,570,270,240,600,240,600,570,270,240,600,570,270,570,270,570,270,240,600,570,270,240,600,570,240,5070,240,570,270,240,600,240,600,570,270,240,600,570,270,570,270,570,270,240,600,570,270,240,600,570,240,5070,270,570,270,240,600,240,600,570,270,240,600,570,270,570,270,570,270;
! 20;07;Byron;ID=0097;SWITCH=05;CMD=ON;CHIME=05;
! 20;08;DEBUG;Pulses=511;Pulses(uSec)=60,570,270,240,600,570,240,5070,270,570,270,240,600,240,600,570,270,240,600,570,270,570,270,570,270,240,600,570,270,240,600,570,240,5130,270,570,270,240,600,240,600,570,270,240,600,570,270,570,270,570,270,240,600,570,270,240,600,570,240,5070,240,570,270,240,600,240,600,570,270,240,600,570,270,570,270,570,240,240,600,570,270,240,600,570,240,5070,270,570,270,240,600,240,600,570,270,240,600,570,270,570,270,570,270,240,600,570,270,240,600,570,240,5070,240,570,240,240,600,240,600,570,240,240,600,570,270,570,240,570,240,240,600,570,270,240,600,570,240,5070,270,570,270,240,600,240,600,570,270,240,600,570,270,570,270,570,270,240,600,570,270,240,600,570,240,5070,240,570,270,240,600,240,600,570,270,240,600,570,270,570,270,570,270,240,600,570,270,240,600,570,240,5070,240,570,240,240,600,240,600,570,240,240,600,570,270,570,240,570,270,240,600,570,240,240,600,570,240,5100,240,570,270,240,600,240,600,570,270,240,600,570,270,570,270,570,270,240,600,570,270,240,600,570,240,5070,240,570,240,240,600,240,600,570,240,240,600,570,270,570,270,570,240,240,600,570,270,240,600,570,240,5070,240,570,270,240,600,240,600,570,270,240,600,570,270,570,270,570,270,240,600,570,270,240,600,570,240,5070,270,570,270,240,600,240,600,570,270,240,600,570,270,570,270,570,270,240,600,570,270,240,600,570,240,5070,240,570,270,240,600,240,600,570,240,240,600,570,270,570,270,570,240,240,600,570,270,240,600,570,240,5070,270,570,270,240,600,240,600,570,270,240,600,570,270,570,270,570,270,240,600,570,270,240,600,570,240,5070,240,570,270,240,600,240,600,570,270,240,600,570,240,570,240,570,270,240,600,570,270,240,600,570,240,5100,270,570,270,240,600,240,600,570,270,240,600,570,270,570,270,570,270,240,600,570,270,240,600,570,240,5070,270,570,270,240,600,240,600,570,270,240,600,570,270,570,270,570,270,240,600,570,270,240,600,570,240,5070,240,570,240,240,600,240,600,570,240,240,600,570,270,570,270,570,270,240,600,570,270,240,600,570,240,5070,240,570,270,240,600,240,600,570,270,240,600,570,270,570,270,570,270,240,600,570,270,240,600,570,240,5070,270,570,270,240,600,240,600,570,270;
! 20;09;DEBUG;Pulses=286;Pulses(uSec)=270,540,240,210,570,210,570,540,240,210,570,570,270,570,270,570,270,240,600,570,270,240,600,570,240,5070,240,570,270,240,600,240,600,570,240,240,600,570,270,570,240,570,270,240,600,570,270,240,600,570,240,5070,240,570,270,240,600,240,600,570,270,240,600,570,270,570,270,570,270,240,600,570,270,240,600,570,240,5070,270,570,270,240,600,240,600,570,270,240,600,570,270,570,270,570,270,240,600,570,270,240,600,570,240,5100,240,570,270,240,600,240,600,570,270,240,600,570,270,570,270,570,270,240,600,570,270,240,600,570,240,5070,270,570,270,240,600,240,600,570,270,240,600,570,270,570,270,570,270,240,600,570,270,240,600,570,240,5070,240,570,240,240,600,240,600,570,240,240,600,570,270,570,240,570,240,240,600,570,240,240,600,570,240,5070,270,570,270,240,600,240,600,570,270,240,600,570,270,570,270,570,270,240,600,570,270,240,600,570,240,5070,270,570,270,240,600,240,600,570,270,240,600,570,270,570,270,570,270,240,600,570,270,240,600,570,240,5070,240,570,240,240,600,240,600,570,240,240,600,570,240,570,240,570,240,240,600,570,240,240,600,570,240,5070,270,570,270,240,600,240,600,570,270,240,600,570,270,570,270,570,270,240,600,570,270,240,600,570,240,6990;
! 20;0A;DEBUG;Pulses=50;Pulses(uSec)=1380,420,1350,420,1350,420,1350,420,360,1380,360,1380,360,1380,1350,420,360,1380,1350,420,360,1380,360,1380,1350,390,1350,420,1350,420,1350,420,1350,420,360,1380,360,1380,360,1380,360,1380,360,1380,360,1380,1350,390,390,6990;
! 20;0B;Chuango;ID=0eb07e;SWITCH=02;CMD=OFF;
! 20;0C;DEBUG;Pulses=50;Pulses(uSec)=1410,420,1350,420,1350,420,1350,420,360,1380,360,1380,360,1380,1350,420,360,1380,1350,420,360,1380,360,1380,1350,420,1350,390,1350,390,1350,420,1350,420,360,1380,390,1380,360,1380,360,1380,360,1380,360,1380,1350,390,390,6990;
! 20;0D;DEBUG;Pulses=112;Pulses(uSec)=840,300,720,300,720,300,720,300,720,300,720,300,720,300,720,300,720,300,720,300,240,780,240,780,720,300,720,300,720,420,240,780,720,300,720,300,720,300,720,420,210,780,240,780,720,300,720,300,720,420,240,780,720,300,240,780,240,780,720,420,240,780,720,300,720,300,720,300,720,420,240,780,720,300,720,300,240,780,720,420,240,780,240,780,720,300,240,780,720,420,240,780,720,300,720,300,240,780,720,420,240,780,240,780,240,780,720,300,720,420,240,6990; -
Triggern auf Update anstatt Änderung
Sent from my iPhone using Tapatalk
-
…. und wie macht man das im Skript? Ich bin in Js-Skript überhaupt gar nicht fit.
` > function seitenwechsel(){
setState('vis.0.control.instance', 'FFFFFFFF');
setState('vis.0.control.data', '200_Webcam'); // 200_Webcam steht für den Namen der View die du anzeigen willst wenn was passiert
setState('vis.0.control.command', 'changeView');
}
// Abfragen des gewünschen Sensors
// wenn der Status auf true wechselt wird 200_Webcam angezeigt
on("rflink.0.channels.Byron_1.SWITCH_05", function(dp) { if(dp.state.val) seitenwechsel(); }); `
-
Nein geht nicht - die JavaSkript Prüfung macht schon ein rotes Kreuz in die Zeile.
713
Online32.7k
Benutzer82.5k
Themen1.3m
Beiträge