[Develop] Onkyo Adapter - VIS Weiterentwicklung
-
Genau, in der Liste ist er gelistet, unterstützt wohl nur nicht alle Kommandos. Mit Putty sehe ich die Signale. Es scheint die Verbindung zwischen Adapter und Verstärker nicht aufgebaut zu werden.
Kann ich da noch etwas tiefer im Adapter nach der Ursache suchen?
Gruß `
Dazu müsstest du das Logging im Expertenmodus des Adapters auf Debug setzen. Dann bekommst du mehr logmeldungen angezeigt. Eventuell sieht man da mehr.Gruß Eisbaeeer
-
Mit der Meldung hört der Log im Debug auf, danach passiert nichts mehr.
Es scheint, als wenn er keine Antwort von dem Receiver bekommt.
onkyo-vis.0 2018-03-07 21:25:30.743 debug DEBUG (sent_discovery) Sent broadcast discovery packet to 192.168.178.29:60128
onkyo-vis.0 2018-03-07 21:25:30.742 info Connecting to AVR 192.168.178.29:60128
Wie kann ich denn die Kommunikation mit dem Receiver per Putty o.ä. testen? Ich sehe da nur die Signale des Receivers, wenn ich ihn per Fernbedienung umschalte.
Wenn ich ein Kommando wie PWR01 eintippe und per Enter bestätige, bekomme ich auch in Putty keine Antwort, sollte da schon etwas passieren?
-
Hallo zusammen,
hätte da auch mal ne Frage. Finde den Onkyo Adapter echt klasse wenn er bei mir funktionieren würde.Nachdem ich die Version 1.0.2 installiert habe und die IP eingegeben hab verbindet sich auch der Adapter und leuchtet Grün.Es erscheinen auch allmöglichen Werte unter Objekten aber leider kann ich bis auf die Lautstärke kaum was steuern. Sobald ich unter commands zb PWR01 oder PWR00 eingebe passiert nicht ausser Fehler im Log. Irgendwas muss ich doch falsch machen….
6387_bildschirmfoto_2018-03-19_um_21.07.52.png -
Hallo Vossi80
Welchen Receiver verwendest Du?
Kannst du mal die Objekte Posten?
Gruß Eisbaeeer
-
Hey …
benutze den TX NR 509
6387_bildschirmfoto_2018-03-19_um_21.19.41.png -
Laut Log interpretiert er ein Zeichen Falsch. Versuche mal bitte den Receiver über das Objekt "Power_Zone1" ein- bzw. auszuschalten. Funktioniert das denn?
Einfach mal unter Objekte dort "true" oder "false" eintragen. Das "ack" flag darf nicht gesetzt werden.
Gruß Eisbaeeer
-
Danke erstmal für deine Hilfe Eisbaeeer…...
also wenn der Receiver an ist kann ich ihn tatsächlich mit "false" bei "Power Zone 1" ausschalten. Aber leider nicht wieder ein wenn ich "true" eintippe. Hier der Log...
Was meinst du mit: Das "ack" flag darf nicht gesetzt werden???
6387_bildschirmfoto_2018-03-19_um_21.34.15.png -
Ja da kommen wir der Sache schon näher.
Also ausschalten geht, einschalten nicht mehr. Kannst du mal mit deinem PC versuchen, den Receiver zu pingen, wenn er ausgeschaltet wurde?
Ich vermute hier, dass die Energiespar Einstellung des Receivers die Netzwerkschnittstelle ausschaltet. Das muss explizit in den Settings des Receivers eingestellt werden, dass die LAN Schnittstelle noch aktiv ist. Leider verbraucht er dann aber ein wenig mehr Strom im Standby.
Gruß Eisbaeeer
-
Leider liegt es nicht daran denn das hatte ich auch schon vermutet. Ich kann ihn ja aus der Handy app ein und aus schalten. Aber auch wenn er an ist nimmt er ja keine Befehle an :roll:
-
Setzte den Adapter mal bitte auf Debug Level. Erweiterte Admin Settings, dann kann man den Loglevel des Adapters hochsetzen, falls nicht schon gemacht.
Dann bitte mal das log löschen, den Filter auf onkyo setzen und den Adapter neu starten. Wenn der Onkyo alle infos an iobroker (der Adapter fragt den Onkyo erstmal jede Menge ab) gesendet hat (log wird ruhiger) bitte mal über das Objekt ausschalten und wieder einschalten versuchen.
Dann bitte den log hier posten (mit dem BBCode "Code" macht es sich einfacher zu lesen). Bin gerade nicht zuhause, aber ich schau mir das dann mal an. Sollte funktionieren. Deinen Receiver haben auch andere schon erfolgreich in Benutzung.
Gruß
-
Hoffe ich hab das jetzt richtig gemacht so wie du es wolltest…..
Aufgefallen ist mir das ich das Gerät mit dem "Power" Button unter Objekte Einschalten kann (Nicht aber ausschalten) und wie grade schon gesagt mit false ausschalten. Bei Commands kann ich eingeben was ich will es passier nichts.
Drücke Strg+A und danach Strg+C, um den Inhalt in die Zwischenablage zu kopieren. Klicke irgendwo, um das Fenster zu schliessen. onkyo-vis.0 2018-03-19 22:10:01.179 info EISCP String: PWR00 onkyo-vis.0 2018-03-19 22:10:00.775 info EISCP String: NLSC-P onkyo-vis.0 2018-03-19 22:09:59.677 info EISCP String: ZPW00 onkyo-vis.0 2018-03-19 22:09:48.657 error at Socket. (/opt/iobroker/node_modules/redis/index.js:274:27) onkyo-vis.0 2018-03-19 22:09:48.657 error at JavascriptRedisParser.execute (/opt/iobroker/node_modules/redis-parser/lib/parser.js:574:12) onkyo-vis.0 2018-03-19 22:09:48.657 error at JavascriptRedisParser.returnReply (/opt/iobroker/node_modules/redis/index.js:192:18) onkyo-vis.0 2018-03-19 22:09:48.657 error at RedisClient.return_reply (/opt/iobroker/node_modules/redis/index.js:833:9) onkyo-vis.0 2018-03-19 22:09:48.657 error at return_pub_sub (/opt/iobroker/node_modules/redis/index.js:794:18) onkyo-vis.0 2018-03-19 22:09:48.657 error at RedisClient.emit (events.js:194:7) onkyo-vis.0 2018-03-19 22:09:48.657 error at emitThree (events.js:116:13) onkyo-vis.0 2018-03-19 22:09:48.657 error at RedisClient. (/opt/iobroker/node_modules/iobroker.js-controller/lib/states/statesInRedis.js:102:25) onkyo-vis.0 2018-03-19 22:09:48.657 error at change (/opt/iobroker/node_modules/iobroker.js-controller/lib/adapter.js:3190:37) onkyo-vis.0 2018-03-19 22:09:48.657 error at Object.stateChange (/opt/iobroker/node_modules/iobroker.onkyo-vis/onkyo.js:33:31) onkyo-vis.0 2018-03-19 22:09:48.657 error TypeError: state.val.match is not a function onkyo-vis.0 2018-03-19 22:09:48.654 error pmessage io.onkyo-vis.0.command {'val':0,'ack':false,'ts':1521493788648,'q':0,'from':'system.adapter.admin.0','lc':1521493788648} state.val.match is not a function onkyo-vis.0 2018-03-19 22:09:37.945 info EISCP String: PWR01 onkyo-vis.0 2018-03-19 22:09:37.866 info EISCP String: NLSU0-No Item onkyo-vis.0 2018-03-19 22:09:37.862 info EISCP String: NLSC0P onkyo-vis.0 2018-03-19 22:09:37.860 error Empty command string! (value: undefined) onkyo-vis.0 2018-03-19 22:09:37.858 info EISCP String: NLTF00100000000000002FF00USB onkyo-vis.0 2018-03-19 22:09:28.970 info EISCP String: NLSC-P onkyo-vis.0 2018-03-19 22:09:25.934 info EISCP String: PWR00 onkyo-vis.0 2018-03-19 22:09:25.869 error Error: ERROR (cmd_not_exist) Command power_zone1 does not exist in zone main onkyo-vis.0 2018-03-19 22:09:19.456 info EISCP String: PWR00 onkyo-vis.0 2018-03-19 22:09:18.986 info EISCP String: NLSC-P onkyo-vis.0 2018-03-19 22:09:15.755 error at Socket. (/opt/iobroker/node_modules/redis/index.js:274:27) onkyo-vis.0 2018-03-19 22:09:15.755 error at JavascriptRedisParser.execute (/opt/iobroker/node_modules/redis-parser/lib/parser.js:574:12) onkyo-vis.0 2018-03-19 22:09:15.755 error at JavascriptRedisParser.returnReply (/opt/iobroker/node_modules/redis/index.js:192:18) onkyo-vis.0 2018-03-19 22:09:15.755 error at RedisClient.return_reply (/opt/iobroker/node_modules/redis/index.js:833:9) onkyo-vis.0 2018-03-19 22:09:15.755 error at return_pub_sub (/opt/iobroker/node_modules/redis/index.js:794:18) onkyo-vis.0 2018-03-19 22:09:15.755 error at RedisClient.emit (events.js:194:7) onkyo-vis.0 2018-03-19 22:09:15.755 error at emitThree (events.js:116:13) onkyo-vis.0 2018-03-19 22:09:15.755 error at RedisClient. (/opt/iobroker/node_modules/iobroker.js-controller/lib/states/statesInRedis.js:102:25) onkyo-vis.0 2018-03-19 22:09:15.755 error at change (/opt/iobroker/node_modules/iobroker.js-controller/lib/adapter.js:3190:37) onkyo-vis.0 2018-03-19 22:09:15.755 error at Object.stateChange (/opt/iobroker/node_modules/iobroker.onkyo-vis/onkyo.js:33:31) onkyo-vis.0 2018-03-19 22:09:15.755 error TypeError: state.val.match is not a function onkyo-vis.0 2018-03-19 22:09:15.746 error pmessage io.onkyo-vis.0.command {'val':0,'ack':false,'ts':1521493755740,'q':0,'from':'system.adapter.admin.0','lc':1521493755740} state.val.match is not a function onkyo-vis.0 2018-03-19 22:09:09.024 info EISCP String: NLSC-P onkyo-vis.0 2018-03-19 22:08:59.052 info EISCP String: NLSC-P onkyo-vis.0 2018-03-19 22:08:49.087 info EISCP String: NLSC-P onkyo-vis.0 2018-03-19 22:08:39.102 info EISCP String: NLSC-P onkyo-vis.0 2018-03-19 22:08:29.131 info EISCP String: NLSC-P onkyo-vis.0 2018-03-19 22:08:19.168 info EISCP String: NLSC-P onkyo-vis.0 2018-03-19 22:08:09.186 info EISCP String: NLSC-P onkyo-vis.0 2018-03-19 22:07:59.255 info EISCP String: PWR00 onkyo-vis.0 2018-03-19 22:07:59.177 info EISCP String: NLSC-P onkyo-vis.0 2018-03-19 22:07:58.933 error Error: ERROR (cmd_not_exist) Command power_zone1 does not exist in zone main onkyo-vis.0 2018-03-19 22:07:51.164 error at Socket. (/opt/iobroker/node_modules/redis/index.js:274:27) onkyo-vis.0 2018-03-19 22:07:51.164 error at JavascriptRedisParser.execute (/opt/iobroker/node_modules/redis-parser/lib/parser.js:574:12) onkyo-vis.0 2018-03-19 22:07:51.164 error at JavascriptRedisParser.returnReply (/opt/iobroker/node_modules/redis/index.js:192:18) onkyo-vis.0 2018-03-19 22:07:51.164 error at RedisClient.return_reply (/opt/iobroker/node_modules/redis/index.js:833:9) onkyo-vis.0 2018-03-19 22:07:51.164 error at return_pub_sub (/opt/iobroker/node_modules/redis/index.js:794:18) onkyo-vis.0 2018-03-19 22:07:51.164 error at RedisClient.emit (events.js:194:7) onkyo-vis.0 2018-03-19 22:07:51.164 error at emitThree (events.js:116:13) onkyo-vis.0 2018-03-19 22:07:51.164 error at RedisClient. (/opt/iobroker/node_modules/iobroker.js-controller/lib/states/statesInRedis.js:102:25) onkyo-vis.0 2018-03-19 22:07:51.164 error at change (/opt/iobroker/node_modules/iobroker.js-controller/lib/adapter.js:3190:37) onkyo-vis.0 2018-03-19 22:07:51.164 error at Object.stateChange (/opt/iobroker/node_modules/iobroker.onkyo-vis/onkyo.js:33:31) onkyo-vis.0 2018-03-19 22:07:51.164 error TypeError: state.val.match is not a function onkyo-vis.0 2018-03-19 22:07:51.147 error pmessage io.onkyo-vis.0.command {'val':0,'ack':false,'ts':1521493671144,'q':0,'from':'system.adapter.admin.0','lc':1521493671144} state.val.match is not a function onkyo-vis.0 2018-03-19 22:07:42.671 info EISCP String: PWR01 onkyo-vis.0 2018-03-19 22:07:25.070 info EISCP String: PWR01 onkyo-vis.0 2018-03-19 22:07:24.620 info ISCP���������!1NLSU0-No Item onkyo-vis.0 2018-03-19 22:07:24.620 info EISCP String: NLSC0P onkyo-vis.0 2018-03-19 22:07:24.618 error Empty command string! (value: undefined) onkyo-vis.0 2018-03-19 22:07:24.616 info EISCP String: NLTF00100000000000002FF00USB onkyo-vis.0 2018-03-19 22:07:18.510 info EISCP String: NLSC-P onkyo-vis.0 2018-03-19 22:07:14.900 info EISCP String: PWR00 onkyo-vis.0 2018-03-19 22:07:14.450 error Error: ERROR (cmd_not_exist) Command power_zone1 does not exist in zone main onkyo-vis.0 2018-03-19 22:07:08.532 info EISCP String: NLSC-P onkyo-vis.0 2018-03-19 22:06:59.240 info EISCP String: MVL19 onkyo-vis.0 2018-03-19 22:06:58.769 info EISCP String: MVL19 onkyo-vis.0 2018-03-19 22:06:58.561 info EISCP String: NLSC-P onkyo-vis.0 2018-03-19 22:06:58.231 info EISCP String: AMT00 onkyo-vis.0 2018-03-19 22:06:57.718 info EISCP String: PWR00 onkyo-vis.0 2018-03-19 22:06:57.217 info EISCP String: SLI29 onkyo-vis.0 2018-03-19 22:06:55.959 info EISCP String: PRZ00 onkyo-vis.0 2018-03-19 22:06:55.718 info EISCP String: PRS00 onkyo-vis.0 2018-03-19 22:06:55.220 info EISCP String: TUZ10555 onkyo-vis.0 2018-03-19 22:06:54.719 info EISCP String: SLZ80 onkyo-vis.0 2018-03-19 22:06:53.207 info EISCP String: ZVLN/A onkyo-vis.0 2018-03-19 22:06:52.711 info EISCP String: ZMT00 onkyo-vis.0 2018-03-19 22:06:52.200 info EISCP String: ZPW01 onkyo-vis.0 2018-03-19 22:06:50.699 info EISCP String: ISTN/A onkyo-vis.0 2018-03-19 22:06:50.199 info EISCP String: ITRN/A onkyo-vis.0 2018-03-19 22:06:49.703 info EISCP String: ITMN/A onkyo-vis.0 2018-03-19 22:06:49.204 info EISCP String: ITIN/A onkyo-vis.0 2018-03-19 22:06:48.779 info EISCP String: IALN/A onkyo-vis.0 2018-03-19 22:06:48.588 info EISCP String: NLSC-P onkyo-vis.0 2018-03-19 22:06:48.194 info EISCP String: IATN/A onkyo-vis.0 2018-03-19 22:06:47.694 info EISCP String: IMDN/A onkyo-vis.0 2018-03-19 22:06:47.196 info EISCP String: NSTS-- onkyo-vis.0 2018-03-19 22:06:46.707 info EISCP String: NTR----/---- onkyo-vis.0 2018-03-19 22:06:46.188 info EISCP String: NTM00:56/--:-- onkyo-vis.0 2018-03-19 22:06:40.662 info EISCP String: SCTN/A onkyo-vis.0 2018-03-19 22:06:40.151 info EISCP String: SCHN/A onkyo-vis.0 2018-03-19 22:06:39.650 info EISCP String: STIN/A onkyo-vis.0 2018-03-19 22:06:39.154 info EISCP String: SATN/A onkyo-vis.0 2018-03-19 22:06:38.684 info EISCP String: SCNN/A onkyo-vis.0 2018-03-19 22:06:38.615 info EISCP String: NLSC-P onkyo-vis.0 2018-03-19 22:06:35.636 info EISCP String: PRS00 onkyo-vis.0 2018-03-19 22:06:34.632 info EISCP String: MOT00 onkyo-vis.0 2018-03-19 22:06:34.133 info EISCP String: DVLN/A onkyo-vis.0 2018-03-19 22:06:33.635 info EISCP String: ADV00 onkyo-vis.0 2018-03-19 22:06:33.134 info EISCP String: ADQ01 onkyo-vis.0 2018-03-19 22:06:32.621 info EISCP String: ADY01 onkyo-vis.0 2018-03-19 22:06:32.124 info EISCP String: RAS00 onkyo-vis.0 2018-03-19 22:06:31.627 info EISCP String: LTN00 onkyo-vis.0 2018-03-19 22:06:31.115 info EISCP String: LMD0B onkyo-vis.0 2018-03-19 22:06:29.619 info EISCP String: ISFN/A onkyo-vis.0 2018-03-19 22:06:28.644 info EISCP String: NLSC-P onkyo-vis.0 2018-03-19 22:06:28.595 info EISCP String: HAO02 onkyo-vis.0 2018-03-19 22:06:27.104 info EISCP String: SLA02 onkyo-vis.0 2018-03-19 22:06:26.092 info EISCP String: SLI29 onkyo-vis.0 2018-03-19 22:06:25.082 info EISCP String: IFA onkyo-vis.0 2018-03-19 22:06:24.579 info EISCP String: DIM00 onkyo-vis.0 2018-03-19 22:06:24.081 info EISCP String: DIF00 onkyo-vis.0 2018-03-19 22:06:23.584 info EISCP String: CTL-7 onkyo-vis.0 2018-03-19 22:06:23.075 info EISCP String: SWL-2 onkyo-vis.0 2018-03-19 22:06:22.590 info EISCP String: SLP00 onkyo-vis.0 2018-03-19 22:06:20.491 info Initial query: master-volume onkyo-vis.0 2018-03-19 22:06:20.490 info Initial query: volume onkyo-vis.0 2018-03-19 22:06:20.489 info Initial query: audio-muting onkyo-vis.0 2018-03-19 22:06:20.488 info Initial query: system-power onkyo-vis.0 2018-03-19 22:06:20.485 info Initial query: input-selector onkyo-vis.0 2018-03-19 22:06:19.073 info EISCP String: TFRB-2T-2 onkyo-vis.0 2018-03-19 22:06:18.674 info EISCP String: NLSC-P onkyo-vis.0 2018-03-19 22:06:18.573 info EISCP String: MVL19 onkyo-vis.0 2018-03-19 22:06:18.079 info EISCP String: MVL19 onkyo-vis.0 2018-03-19 22:06:17.561 info EISCP String: SPLN/A onkyo-vis.0 2018-03-19 22:06:17.063 info EISCP String: SPBN/A onkyo-vis.0 2018-03-19 22:06:16.564 info EISCP String: SPAN/A onkyo-vis.0 2018-03-19 22:06:16.068 info EISCP String: AMT00 onkyo-vis.0 2018-03-19 22:06:15.549 info EISCP String: PWR00 onkyo-vis.0 2018-03-19 22:06:15.493 info EISCP String: NLSC-P onkyo-vis.0 2018-03-19 22:06:15.482 error Error: ERROR (arg_not_exist) Argument query does not exist in command listening-mode onkyo-vis.0 2018-03-19 22:06:15.482 error Error: ERROR (arg_not_exist) Argument query does not exist in command internet-radio-preset onkyo-vis.0 2018-03-19 22:06:15.481 error Error: ERROR (arg_not_exist) Argument query does not exist in command net-tune-network onkyo-vis.0 2018-03-19 22:06:15.475 error Error: ERROR (arg_not_exist) Argument query does not exist in command dab-display-info onkyo-vis.0 2018-03-19 22:06:15.470 error Error: ERROR (arg_not_exist) Argument query does not exist in command ipod-list-info onkyo-vis.0 2018-03-19 22:06:15.467 error Error: ERROR (arg_not_exist) Argument query does not exist in command universal-port onkyo-vis.0 2018-03-19 22:06:15.466 error Error: ERROR (arg_not_exist) Argument query does not exist in command cd-r-recorder onkyo-vis.0 2018-03-19 22:06:15.464 error Error: ERROR (arg_not_exist) Argument query does not exist in command md-recorder onkyo-vis.0 2018-03-19 22:06:15.462 error Error: ERROR (arg_not_exist) Argument query does not exist in command dvd-player onkyo-vis.0 2018-03-19 22:06:15.461 error Error: ERROR (arg_not_exist) Argument query does not exist in command dat-recorder onkyo-vis.0 2018-03-19 22:06:15.460 error Error: ERROR (arg_not_exist) Argument query does not exist in command graphics-equalizer onkyo-vis.0 2018-03-19 22:06:15.459 error Error: ERROR (arg_not_exist) Argument query does not exist in command tape2-b onkyo-vis.0 2018-03-19 22:06:15.458 error Error: ERROR (arg_not_exist) Argument query does not exist in command tape1-a onkyo-vis.0 2018-03-19 22:06:15.457 error Error: ERROR (arg_not_exist) Argument query does not exist in command cd-player onkyo-vis.0 2018-03-19 22:06:15.456 error Error: ERROR (arg_not_exist) Argument query does not exist in command net-popup-message onkyo-vis.0 2018-03-19 22:06:15.454 error Error: ERROR (arg_not_exist) Argument query does not exist in command net-keyboard onkyo-vis.0 2018-03-19 22:06:15.452 error Error: ERROR (arg_not_exist) Argument query does not exist in command net-service onkyo-vis.0 2018-03-19 22:06:15.451 error Error: ERROR (arg_not_exist) Argument query does not exist in command net-usb-jacket-art onkyo-vis.0 2018-03-19 22:06:15.450 error Error: ERROR (arg_not_exist) Argument query does not exist in command net-usb-list-info onkyo-vis.0 2018-03-19 22:06:15.449 error Error: ERROR (arg_not_exist) Argument query does not exist in command internet-radio-preset onkyo-vis.0 2018-03-19 22:06:15.446 error Error: ERROR (arg_not_exist) Argument query does not exist in command network-usb onkyo-vis.0 2018-03-19 22:06:15.440 error Error: ERROR (arg_not_exist) Argument query does not exist in command sirius-parental-lock onkyo-vis.0 2018-03-19 22:06:15.436 error Error: ERROR (arg_not_exist) Argument query does not exist in command tp-scan onkyo-vis.0 2018-03-19 22:06:15.436 error Error: ERROR (arg_not_exist) Argument query does not exist in command pty-scan onkyo-vis.0 2018-03-19 22:06:15.435 error Error: ERROR (arg_not_exist) Argument query does not exist in command rds-information onkyo-vis.0 2018-03-19 22:06:15.435 error Error: ERROR (arg_not_exist) Argument query does not exist in command preset-memory onkyo-vis.0 2018-03-19 22:06:15.421 error Error: ERROR (arg_not_exist) Argument query does not exist in command 12v-trigger-c onkyo-vis.0 2018-03-19 22:06:15.421 error Error: ERROR (arg_not_exist) Argument query does not exist in command 12v-trigger-b onkyo-vis.0 2018-03-19 22:06:15.420 error Error: ERROR (arg_not_exist) Argument query does not exist in command 12v-trigger-a onkyo-vis.0 2018-03-19 22:06:15.418 error Error: ERROR (arg_not_exist) Argument query does not exist in command memory-setup onkyo-vis.0 2018-03-19 22:06:15.418 error Error: ERROR (arg_not_exist) Argument query does not exist in command setup onkyo-vis.0 2018-03-19 22:06:15.416 error Error: ERROR (arg_not_exist) Argument query does not exist in command speaker-level-calibration onkyo-vis.0 2018-03-19 22:06:15.392 info Successfully connected to AVR onkyo-vis.0 2018-03-19 22:06:15.340 info Connecting to AVR 192.168.178.43:60128 onkyo-vis.0 2018-03-19 22:06:15.017 info Create new object: onkyo-vis.0.Video_Information, role = switch onkyo-vis.0 2018-03-19 22:06:15.017 info My array objects: onkyo-vis.0.Video_Information, role = switch onkyo-vis.0 2018-03-19 22:06:15.016 info Create new object: onkyo-vis.0.Audio_Information, role = switch onkyo-vis.0 2018-03-19 22:06:15.016 info My array objects: onkyo-vis.0.Audio_Information, role = switch onkyo-vis.0 2018-03-19 22:06:15.016 info Create new object: onkyo-vis.0.Listening_Mode, role = switch onkyo-vis.0 2018-03-19 22:06:15.015 info My array objects: onkyo-vis.0.Listening_Mode, role = switch onkyo-vis.0 2018-03-19 22:06:15.014 info Create new object: onkyo-vis.0.Tuner_Preset_Zone2, role = switch onkyo-vis.0 2018-03-19 22:06:15.014 info My array objects: onkyo-vis.0.Tuner_Preset_Zone2, role = switch onkyo-vis.0 2018-03-19 22:06:15.013 info Create new object: onkyo-vis.0.Tuner_Preset_Zone1, role = switch onkyo-vis.0 2018-03-19 22:06:15.012 info My array objects: onkyo-vis.0.Tuner_Preset_Zone1, role = switch onkyo-vis.0 2018-03-19 22:06:15.011 info Create new object: onkyo-vis.0.Audio_Mute_Zone2, role = switch onkyo-vis.0 2018-03-19 22:06:15.011 info My array objects: onkyo-vis.0.Audio_Mute_Zone2, role = switch onkyo-vis.0 2018-03-19 22:06:15.011 info Create new object: onkyo-vis.0.Audio_Mute_Zone1, role = switch onkyo-vis.0 2018-03-19 22:06:15.010 info My array objects: onkyo-vis.0.Audio_Mute_Zone1, role = switch onkyo-vis.0 2018-03-19 22:06:15.010 info Create new object: onkyo-vis.0.Input_Select_Zone2, role = switch onkyo-vis.0 2018-03-19 22:06:15.009 info My array objects: onkyo-vis.0.Input_Select_Zone2, role = switch onkyo-vis.0 2018-03-19 22:06:15.008 info Create new object: onkyo-vis.0.Input_Select_Zone1, role = switch onkyo-vis.0 2018-03-19 22:06:15.008 info My array objects: onkyo-vis.0.Input_Select_Zone1, role = switch onkyo-vis.0 2018-03-19 22:06:15.005 info Create new object: onkyo-vis.0.Internet_Radio_Preset_Zone2, role = switch onkyo-vis.0 2018-03-19 22:06:15.005 info My array objects: onkyo-vis.0.Internet_Radio_Preset_Zone2, role = switch onkyo-vis.0 2018-03-19 22:06:15.002 info Create new object: onkyo-vis.0.Internet_Radio_Preset_Zone1, role = switch onkyo-vis.0 2018-03-19 22:06:15.002 info My array objects: onkyo-vis.0.Internet_Radio_Preset_Zone1, role = switch onkyo-vis.0 2018-03-19 22:06:15.001 info Create new object: onkyo-vis.0.Tuning_Zone2, role = switch onkyo-vis.0 2018-03-19 22:06:15.001 info My array objects: onkyo-vis.0.Tuning_Zone2, role = switch onkyo-vis.0 2018-03-19 22:06:15.000 info Create new object: onkyo-vis.0.Tuning_Zone1, role = switch onkyo-vis.0 2018-03-19 22:06:14.999 info My array objects: onkyo-vis.0.Tuning_Zone1, role = switch onkyo-vis.0 2018-03-19 22:06:14.999 info Create new object: onkyo-vis.0.Volume_Zone2, role = switch onkyo-vis.0 2018-03-19 22:06:14.999 info My array objects: onkyo-vis.0.Volume_Zone2, role = switch onkyo-vis.0 2018-03-19 22:06:14.998 info Create new object: onkyo-vis.0.Volume_Zone1, role = switch onkyo-vis.0 2018-03-19 22:06:14.998 info My array objects: onkyo-vis.0.Volume_Zone1, role = switch onkyo-vis.0 2018-03-19 22:06:14.997 info Create new object: onkyo-vis.0.NET_Shuffle_Status, role = switch onkyo-vis.0 2018-03-19 22:06:14.997 info My array objects: onkyo-vis.0.NET_Shuffle_Status, role = switch onkyo-vis.0 2018-03-19 22:06:14.997 info Create new object: onkyo-vis.0.NET_Repeat_Status, role = switch onkyo-vis.0 2018-03-19 22:06:14.996 info My array objects: onkyo-vis.0.NET_Repeat_Status, role = switch onkyo-vis.0 2018-03-19 22:06:14.995 info Create new object: onkyo-vis.0.NET_Play_Status, role = switch onkyo-vis.0 2018-03-19 22:06:14.995 info My array objects: onkyo-vis.0.NET_Play_Status, role = switch onkyo-vis.0 2018-03-19 22:06:14.994 info Create new object: onkyo-vis.0.NET/USB_Track_Info, role = switch onkyo-vis.0 2018-03-19 22:06:14.993 info My array objects: onkyo-vis.0.NET/USB_Track_Info, role = switch onkyo-vis.0 2018-03-19 22:06:14.991 info Create new object: onkyo-vis.0.NET/USB_Album_Name_Info, role = switch onkyo-vis.0 2018-03-19 22:06:14.990 info My array objects: onkyo-vis.0.NET/USB_Album_Name_Info, role = switch onkyo-vis.0 2018-03-19 22:06:14.989 info Create new object: onkyo-vis.0.NET/USB_Time, role = switch onkyo-vis.0 2018-03-19 22:06:14.988 info My array objects: onkyo-vis.0.NET/USB_Time, role = switch onkyo-vis.0 2018-03-19 22:06:14.987 info Create new object: onkyo-vis.0.NET/USB_Time_Current, role = switch onkyo-vis.0 2018-03-19 22:06:14.986 info My array objects: onkyo-vis.0.NET/USB_Time_Current, role = switch onkyo-vis.0 2018-03-19 22:06:14.985 info Create new object: onkyo-vis.0.NET/USB_Time_Info, role = switch onkyo-vis.0 2018-03-19 22:06:14.984 info My array objects: onkyo-vis.0.NET/USB_Time_Info, role = switch onkyo-vis.0 2018-03-19 22:06:14.983 info Create new object: onkyo-vis.0.NET/USB_Title_Name, role = switch onkyo-vis.0 2018-03-19 22:06:14.982 info My array objects: onkyo-vis.0.NET/USB_Title_Name, role = switch onkyo-vis.0 2018-03-19 22:06:14.981 info Create new object: onkyo-vis.0.NET/USB_Artist_Name_Info, role = switch onkyo-vis.0 2018-03-19 22:06:14.981 info My array objects: onkyo-vis.0.NET/USB_Artist_Name_Info, role = switch onkyo-vis.0 2018-03-19 22:06:14.980 info Create new object: onkyo-vis.0.Power_Zone2, role = switch onkyo-vis.0 2018-03-19 22:06:14.979 info My array objects: onkyo-vis.0.Power_Zone2, role = switch onkyo-vis.0 2018-03-19 22:06:14.978 info Create new object: onkyo-vis.0.Power_Zone1, role = switch onkyo-vis.0 2018-03-19 22:06:14.976 info My array objects: onkyo-vis.0.Power_Zone1, role = switch onkyo-vis.0 2018-03-19 22:06:14.965 info Create new object: onkyo-vis.0.command, role = switch onkyo-vis.0 2018-03-19 22:06:14.965 info My array objects: onkyo-vis.0.command, role = switch onkyo-vis.0 2018-03-19 22:06:14.951 info starting. Version 1.0.2 in /opt/iobroker/node_modules/iobroker.onkyo-vis, node: v6.12.0 onkyo-vis.0 2018-03-19 22:06:14.877 info States connected to redis: 127.0.0.1:6379 onkyo-vis.0 2018-03-19 22:06:10.662 info terminating onkyo-vis.0 2018-03-19 22:06:10.644 info AVR disconnected -
Hey, prima. Alles richtig gemacht.
Ich glaube ich hab da noch eine Idee. Und eventuell ist das auch das Problem von einem anderen User.
Kann es sein, dass du deinen Receiver mit nur einer Zone betreibst? Also gar keine 2. Zone benutzt?
Wenn das so ist, hast du schon weiter geholfen. Dann liegt der Fehler noch in meinem Adapter. Denn ich bin immer davon ausgegangen, dass 2 Zonen verwendet werden (mea culpa).
Wenn du kein 7.1 verwendest, kannst du mal versuchen, die 2. Zone in deinem Onkyo zu aktivieren/konfigurieren. Wenn es dann geht, muss ich den Adapter nochmal anpassen. Laut deinem erweiterten Log bekomme ich nämlich für Zone2 keine Daten.
Gruß Eisbaeeer
-
Hey Eisbaeer….
also du hast recht das ich Zone 2 nicht nutze. Ich hab heut morgen mal versucht die Zone 2 zu aktivieren( am Reciever eingeschaltet) um zu gucken ob ich dann über Objekte was steuern kann doch leider mit dem selben Ergebnis. Du meinst ich sollte Zone 2 aktivieren bzw. einstellen. Was genau meinst du damit ? Reicht nicht das einschalten der Zone 2 ????
-
Du meinst ich sollte Zone 2 aktivieren bzw. einstellen. Was genau meinst du damit ? Reicht nicht das einschalten der Zone 2 ???? `
Da ich den 509 nicht habe, bin ich mal die Anleitung durchgegangen. Bei muss für die Zone 2 nichts konfiguriert werden. Das ist bei meinem anders, da er für die Zone2 schon eine Endstufe mit eingebaut hat.-
Prüfe mal bitte noch die folgende Einstellung des Onkyo: Setup -> Hardware -> Network -> Network Control option . Die bitte auf an, sollte aber wohl schon so sein, sonst könntest du nicht über die App einschalten.
-
Das node-module, das für den Adapter verwendet wird, hat noch "high-level" commands integriert. Kannst du mal versuchen, in das Objekt "command" die folgenden Befehle einzutragen:
- power on
power off power:on power:off main.power on main.power off main power on main power off main.power=on main.power=offIch kann das alles im Moment nur leider nicht testen, da ich im Hotel sitze. Bitte gib mir dann eine Rückmeldung, ob und welche Befehle geklappt haben.
Und könntest du mir noch einen Screenshot der Adaptereinstellung in iobroker vom onkyo-vis hier reinstellen?
Danke und Grüße
-
-
Hallo Eisbaeer….
ich hab jetzt alle Befehle eingegeben wie du sie mir vorgegeben hast. Leider nimmt er nichts davon an. Hab vorsichtshalber auch mit eingeschalteter Zone2 das auch probiert mit dem gleichen Ergebnis. Wenn ich mit dem Power Button einschalte, was ja geht, steht bei commands PWR01....gebe ich das aber direkt ein kommt nichts :roll:
Drücke Strg+A und danach Strg+C, um den Inhalt in die Zwischenablage zu kopieren. Klicke irgendwo, um das Fenster zu schliessen. onkyo-vis.0 2018-03-20 19:26:22.455 info EISCP String: PWR00 onkyo-vis.0 2018-03-20 19:24:01.318 error at Socket. (/opt/iobroker/node_modules/redis/index.js:274:27) onkyo-vis.0 2018-03-20 19:24:01.318 error at JavascriptRedisParser.execute (/opt/iobroker/node_modules/redis-parser/lib/parser.js:574:12) onkyo-vis.0 2018-03-20 19:24:01.318 error at JavascriptRedisParser.returnReply (/opt/iobroker/node_modules/redis/index.js:192:18) onkyo-vis.0 2018-03-20 19:24:01.318 error at RedisClient.return_reply (/opt/iobroker/node_modules/redis/index.js:833:9) onkyo-vis.0 2018-03-20 19:24:01.318 error at return_pub_sub (/opt/iobroker/node_modules/redis/index.js:794:18) onkyo-vis.0 2018-03-20 19:24:01.318 error at RedisClient.emit (events.js:194:7) onkyo-vis.0 2018-03-20 19:24:01.318 error at emitThree (events.js:116:13) onkyo-vis.0 2018-03-20 19:24:01.318 error at RedisClient. (/opt/iobroker/node_modules/iobroker.js-controller/lib/states/statesInRedis.js:102:25) onkyo-vis.0 2018-03-20 19:24:01.318 error at change (/opt/iobroker/node_modules/iobroker.js-controller/lib/adapter.js:3190:37) onkyo-vis.0 2018-03-20 19:24:01.318 error at Object.stateChange (/opt/iobroker/node_modules/iobroker.onkyo-vis/onkyo.js:33:31) onkyo-vis.0 2018-03-20 19:24:01.318 error TypeError: state.val.match is not a function onkyo-vis.0 2018-03-20 19:24:01.315 error pmessage io.onkyo-vis.0.command {'val':0,'ack':false,'ts':1521570241309,'q':0,'from':'system.adapter.admin.0','lc':1521570191882} state.val.match is not a function onkyo-vis.0 2018-03-20 19:23:42.894 error at Socket. (/opt/iobroker/node_modules/redis/index.js:274:27) onkyo-vis.0 2018-03-20 19:23:42.894 error at JavascriptRedisParser.execute (/opt/iobroker/node_modules/redis-parser/lib/parser.js:574:12) onkyo-vis.0 2018-03-20 19:23:42.894 error at JavascriptRedisParser.returnReply (/opt/iobroker/node_modules/redis/index.js:192:18) onkyo-vis.0 2018-03-20 19:23:42.894 error at RedisClient.return_reply (/opt/iobroker/node_modules/redis/index.js:833:9) onkyo-vis.0 2018-03-20 19:23:42.894 error at return_pub_sub (/opt/iobroker/node_modules/redis/index.js:794:18) onkyo-vis.0 2018-03-20 19:23:42.894 error at RedisClient.emit (events.js:194:7) onkyo-vis.0 2018-03-20 19:23:42.894 error at emitThree (events.js:116:13) onkyo-vis.0 2018-03-20 19:23:42.894 error at RedisClient. (/opt/iobroker/node_modules/iobroker.js-controller/lib/states/statesInRedis.js:102:25) onkyo-vis.0 2018-03-20 19:23:42.894 error at change (/opt/iobroker/node_modules/iobroker.js-controller/lib/adapter.js:3190:37) onkyo-vis.0 2018-03-20 19:23:42.894 error at Object.stateChange (/opt/iobroker/node_modules/iobroker.onkyo-vis/onkyo.js:33:31) onkyo-vis.0 2018-03-20 19:23:42.894 error TypeError: state.val.match is not a function onkyo-vis.0 2018-03-20 19:23:42.890 error pmessage io.onkyo-vis.0.command {'val':0,'ack':false,'ts':1521570222884,'q':0,'from':'system.adapter.admin.0','lc':1521570191882} state.val.match is not a function onkyo-vis.0 2018-03-20 19:23:24.045 error at Socket. (/opt/iobroker/node_modules/redis/index.js:274:27) onkyo-vis.0 2018-03-20 19:23:24.045 error at JavascriptRedisParser.execute (/opt/iobroker/node_modules/redis-parser/lib/parser.js:574:12) onkyo-vis.0 2018-03-20 19:23:24.045 error at JavascriptRedisParser.returnReply (/opt/iobroker/node_modules/redis/index.js:192:18) onkyo-vis.0 2018-03-20 19:23:24.045 error at RedisClient.return_reply (/opt/iobroker/node_modules/redis/index.js:833:9) onkyo-vis.0 2018-03-20 19:23:24.045 error at return_pub_sub (/opt/iobroker/node_modules/redis/index.js:794:18) onkyo-vis.0 2018-03-20 19:23:24.045 error at RedisClient.emit (events.js:194:7) onkyo-vis.0 2018-03-20 19:23:24.045 error at emitThree (events.js:116:13) onkyo-vis.0 2018-03-20 19:23:24.045 error at RedisClient. (/opt/iobroker/node_modules/iobroker.js-controller/lib/states/statesInRedis.js:102:25) onkyo-vis.0 2018-03-20 19:23:24.045 error at change (/opt/iobroker/node_modules/iobroker.js-controller/lib/adapter.js:3190:37) onkyo-vis.0 2018-03-20 19:23:24.045 error at Object.stateChange (/opt/iobroker/node_modules/iobroker.onkyo-vis/onkyo.js:33:31) onkyo-vis.0 2018-03-20 19:23:24.045 error TypeError: state.val.match is not a function onkyo-vis.0 2018-03-20 19:23:24.042 error pmessage io.onkyo-vis.0.command {'val':0,'ack':false,'ts':1521570204036,'q':0,'from':'system.adapter.admin.0','lc':1521570191882} state.val.match is not a function onkyo-vis.0 2018-03-20 19:23:11.892 error at Socket. (/opt/iobroker/node_modules/redis/index.js:274:27) onkyo-vis.0 2018-03-20 19:23:11.892 error at JavascriptRedisParser.execute (/opt/iobroker/node_modules/redis-parser/lib/parser.js:574:12) onkyo-vis.0 2018-03-20 19:23:11.892 error at JavascriptRedisParser.returnReply (/opt/iobroker/node_modules/redis/index.js:192:18) onkyo-vis.0 2018-03-20 19:23:11.892 error at RedisClient.return_reply (/opt/iobroker/node_modules/redis/index.js:833:9) onkyo-vis.0 2018-03-20 19:23:11.892 error at return_pub_sub (/opt/iobroker/node_modules/redis/index.js:794:18) onkyo-vis.0 2018-03-20 19:23:11.892 error at RedisClient.emit (events.js:194:7) onkyo-vis.0 2018-03-20 19:23:11.892 error at emitThree (events.js:116:13) onkyo-vis.0 2018-03-20 19:23:11.892 error at RedisClient. (/opt/iobroker/node_modules/iobroker.js-controller/lib/states/statesInRedis.js:102:25) onkyo-vis.0 2018-03-20 19:23:11.892 error at change (/opt/iobroker/node_modules/iobroker.js-controller/lib/adapter.js:3190:37) onkyo-vis.0 2018-03-20 19:23:11.892 error at Object.stateChange (/opt/iobroker/node_modules/iobroker.onkyo-vis/onkyo.js:33:31) onkyo-vis.0 2018-03-20 19:23:11.892 error TypeError: state.val.match is not a function onkyo-vis.0 2018-03-20 19:23:11.888 error pmessage io.onkyo-vis.0.command {'val':0,'ack':false,'ts':1521570191882,'q':0,'from':'system.adapter.admin.0','lc':1521570191882} state.val.match is not a function onkyo-vis.0 2018-03-20 19:22:42.014 info EISCP String: PWR00 onkyo-vis.0 2018-03-20 19:22:41.488 info EISCP String: ZPW01 onkyo-vis.0 2018-03-20 19:22:21.409 info EISCP String: PWR01 onkyo-vis.0 2018-03-20 19:22:18.464 info EISCP String: PWR00 onkyo-vis.0 2018-03-20 19:22:18.112 error Error: ERROR (cmd_not_exist) Command power_zone1 does not exist in zone main onkyo-vis.0 2018-03-20 19:22:11.184 error at Socket. (/opt/iobroker/node_modules/redis/index.js:274:27) onkyo-vis.0 2018-03-20 19:22:11.184 error at JavascriptRedisParser.execute (/opt/iobroker/node_modules/redis-parser/lib/parser.js:574:12) onkyo-vis.0 2018-03-20 19:22:11.184 error at JavascriptRedisParser.returnReply (/opt/iobroker/node_modules/redis/index.js:192:18) onkyo-vis.0 2018-03-20 19:22:11.184 error at RedisClient.return_reply (/opt/iobroker/node_modules/redis/index.js:833:9) onkyo-vis.0 2018-03-20 19:22:11.184 error at return_pub_sub (/opt/iobroker/node_modules/redis/index.js:794:18) onkyo-vis.0 2018-03-20 19:22:11.184 error at RedisClient.emit (events.js:194:7) onkyo-vis.0 2018-03-20 19:22:11.184 error at emitThree (events.js:116:13) onkyo-vis.0 2018-03-20 19:22:11.184 error at RedisClient. (/opt/iobroker/node_modules/iobroker.js-controller/lib/states/statesInRedis.js:102:25) onkyo-vis.0 2018-03-20 19:22:11.184 error at change (/opt/iobroker/node_modules/iobroker.js-controller/lib/adapter.js:3190:37) onkyo-vis.0 2018-03-20 19:22:11.184 error at Object.stateChange (/opt/iobroker/node_modules/iobroker.onkyo-vis/onkyo.js:33:31) onkyo-vis.0 2018-03-20 19:22:11.184 error TypeError: state.val.match is not a function onkyo-vis.0 2018-03-20 19:22:11.182 error pmessage io.onkyo-vis.0.command {'val':0,'ack':false,'ts':1521570131179,'q':0,'from':'system.adapter.admin.0','lc':1521570058198} state.val.match is not a function onkyo-vis.0 2018-03-20 19:21:56.865 error at Socket. (/opt/iobroker/node_modules/redis/index.js:274:27) onkyo-vis.0 2018-03-20 19:21:56.865 error at JavascriptRedisParser.execute (/opt/iobroker/node_modules/redis-parser/lib/parser.js:574:12) onkyo-vis.0 2018-03-20 19:21:56.865 error at JavascriptRedisParser.returnReply (/opt/iobroker/node_modules/redis/index.js:192:18) onkyo-vis.0 2018-03-20 19:21:56.865 error at RedisClient.return_reply (/opt/iobroker/node_modules/redis/index.js:833:9) onkyo-vis.0 2018-03-20 19:21:56.865 error at return_pub_sub (/opt/iobroker/node_modules/redis/index.js:794:18) onkyo-vis.0 2018-03-20 19:21:56.865 error at RedisClient.emit (events.js:194:7) onkyo-vis.0 2018-03-20 19:21:56.865 error at emitThree (events.js:116:13) onkyo-vis.0 2018-03-20 19:21:56.865 error at RedisClient. (/opt/iobroker/node_modules/iobroker.js-controller/lib/states/statesInRedis.js:102:25) onkyo-vis.0 2018-03-20 19:21:56.865 error at change (/opt/iobroker/node_modules/iobroker.js-controller/lib/adapter.js:3190:37) onkyo-vis.0 2018-03-20 19:21:56.865 error at Object.stateChange (/opt/iobroker/node_modules/iobroker.onkyo-vis/onkyo.js:33:31) onkyo-vis.0 2018-03-20 19:21:56.865 error TypeError: state.val.match is not a function onkyo-vis.0 2018-03-20 19:21:56.860 error pmessage io.onkyo-vis.0.command {'val':0,'ack':false,'ts':1521570116838,'q':0,'from':'system.adapter.admin.0','lc':1521570058198} state.val.match is not a function onkyo-vis.0 2018-03-20 19:21:37.947 error at Socket. (/opt/iobroker/node_modules/redis/index.js:274:27) onkyo-vis.0 2018-03-20 19:21:37.947 error at JavascriptRedisParser.execute (/opt/iobroker/node_modules/redis-parser/lib/parser.js:574:12) onkyo-vis.0 2018-03-20 19:21:37.947 error at JavascriptRedisParser.returnReply (/opt/iobroker/node_modules/redis/index.js:192:18) onkyo-vis.0 2018-03-20 19:21:37.947 error at RedisClient.return_reply (/opt/iobroker/node_modules/redis/index.js:833:9) onkyo-vis.0 2018-03-20 19:21:37.947 error at return_pub_sub (/opt/iobroker/node_modules/redis/index.js:794:18) onkyo-vis.0 2018-03-20 19:21:37.947 error at RedisClient.emit (events.js:194:7) onkyo-vis.0 2018-03-20 19:21:37.947 error at emitThree (events.js:116:13) onkyo-vis.0 2018-03-20 19:21:37.947 error at RedisClient. (/opt/iobroker/node_modules/iobroker.js-controller/lib/states/statesInRedis.js:102:25) onkyo-vis.0 2018-03-20 19:21:37.947 error at change (/opt/iobroker/node_modules/iobroker.js-controller/lib/adapter.js:3190:37) onkyo-vis.0 2018-03-20 19:21:37.947 error at Object.stateChange (/opt/iobroker/node_modules/iobroker.onkyo-vis/onkyo.js:33:31) onkyo-vis.0 2018-03-20 19:21:37.947 error TypeError: state.val.match is not a function onkyo-vis.0 2018-03-20 19:21:37.941 error pmessage io.onkyo-vis.0.command {'val':0,'ack':false,'ts':1521570097924,'q':0,'from':'system.adapter.admin.0','lc':1521570058198} state.val.match is not a function onkyo-vis.0 2018-03-20 19:21:21.640 error at Socket. (/opt/iobroker/node_modules/redis/index.js:274:27) onkyo-vis.0 2018-03-20 19:21:21.640 error at JavascriptRedisParser.execute (/opt/iobroker/node_modules/redis-parser/lib/parser.js:574:12) onkyo-vis.0 2018-03-20 19:21:21.640 error at JavascriptRedisParser.returnReply (/opt/iobroker/node_modules/redis/index.js:192:18) onkyo-vis.0 2018-03-20 19:21:21.640 error at RedisClient.return_reply (/opt/iobroker/node_modules/redis/index.js:833:9) onkyo-vis.0 2018-03-20 19:21:21.640 error at return_pub_sub (/opt/iobroker/node_modules/redis/index.js:794:18) onkyo-vis.0 2018-03-20 19:21:21.640 error at RedisClient.emit (events.js:194:7) onkyo-vis.0 2018-03-20 19:21:21.640 error at emitThree (events.js:116:13) onkyo-vis.0 2018-03-20 19:21:21.640 error at RedisClient. (/opt/iobroker/node_modules/iobroker.js-controller/lib/states/statesInRedis.js:102:25) onkyo-vis.0 2018-03-20 19:21:21.640 error at change (/opt/iobroker/node_modules/iobroker.js-controller/lib/adapter.js:3190:37) onkyo-vis.0 2018-03-20 19:21:21.640 error at Object.stateChange (/opt/iobroker/node_modules/iobroker.onkyo-vis/onkyo.js:33:31) onkyo-vis.0 2018-03-20 19:21:21.640 error TypeError: state.val.match is not a function onkyo-vis.0 2018-03-20 19:21:21.635 error pmessage io.onkyo-vis.0.command {'val':0,'ack':false,'ts':1521570081628,'q':0,'from':'system.adapter.admin.0','lc':1521570058198} state.val.match is not a function onkyo-vis.0 2018-03-20 19:20:58.249 error at Socket. (/opt/iobroker/node_modules/redis/index.js:274:27) onkyo-vis.0 2018-03-20 19:20:58.249 error at JavascriptRedisParser.execute (/opt/iobroker/node_modules/redis-parser/lib/parser.js:574:12) onkyo-vis.0 2018-03-20 19:20:58.249 error at JavascriptRedisParser.returnReply (/opt/iobroker/node_modules/redis/index.js:192:18) onkyo-vis.0 2018-03-20 19:20:58.249 error at RedisClient.return_reply (/opt/iobroker/node_modules/redis/index.js:833:9) onkyo-vis.0 2018-03-20 19:20:58.249 error at return_pub_sub (/opt/iobroker/node_modules/redis/index.js:794:18) onkyo-vis.0 2018-03-20 19:20:58.249 error at RedisClient.emit (events.js:194:7) onkyo-vis.0 2018-03-20 19:20:58.249 error at emitThree (events.js:116:13) onkyo-vis.0 2018-03-20 19:20:58.249 error at RedisClient. (/opt/iobroker/node_modules/iobroker.js-controller/lib/states/statesInRedis.js:102:25) onkyo-vis.0 2018-03-20 19:20:58.249 error at change (/opt/iobroker/node_modules/iobroker.js-controller/lib/adapter.js:3190:37) onkyo-vis.0 2018-03-20 19:20:58.249 error at Object.stateChange (/opt/iobroker/node_modules/iobroker.onkyo-vis/onkyo.js:33:31) onkyo-vis.0 2018-03-20 19:20:58.249 error TypeError: state.val.match is not a function onkyo-vis.0 2018-03-20 19:20:58.206 error pmessage io.onkyo-vis.0.command {'val':0,'ack':false,'ts':1521570058198,'q':0,'from':'system.adapter.admin.0','lc':1521570058198} state.val.match is not a function onkyo-vis.0 2018-03-20 19:20:29.514 info EISCP String: MVL1B onkyo-vis.0 2018-03-20 19:20:29.008 info EISCP String: MVL1B onkyo-vis.0 2018-03-20 19:20:28.491 info EISCP String: AMT00 onkyo-vis.0 2018-03-20 19:20:27.978 info EISCP String: PWR01 onkyo-vis.0 2018-03-20 19:20:27.499 info EISCP String: SLI10 onkyo-vis.0 2018-03-20 19:20:26.276 info EISCP String: PRZ00 onkyo-vis.0 2018-03-20 19:20:25.993 info EISCP String: PRS00 onkyo-vis.0 2018-03-20 19:20:25.480 info EISCP String: TUZ10555 onkyo-vis.0 2018-03-20 19:20:24.999 info EISCP String: SLZ80 onkyo-vis.0 2018-03-20 19:20:23.476 info EISCP String: ZVLN/A onkyo-vis.0 2018-03-20 19:20:22.982 info EISCP String: ZMT00 onkyo-vis.0 2018-03-20 19:20:22.468 info EISCP String: ZPW00 onkyo-vis.0 2018-03-20 19:20:20.968 info EISCP String: ISTN/A onkyo-vis.0 2018-03-20 19:20:20.447 info EISCP String: ITRN/A onkyo-vis.0 2018-03-20 19:20:19.949 info EISCP String: ITMN/A onkyo-vis.0 2018-03-20 19:20:19.449 info EISCP String: ITIN/A onkyo-vis.0 2018-03-20 19:20:18.969 info EISCP String: IALN/A onkyo-vis.0 2018-03-20 19:20:18.460 info EISCP String: IATN/A onkyo-vis.0 2018-03-20 19:20:17.963 info EISCP String: IMDN/A onkyo-vis.0 2018-03-20 19:20:17.457 info EISCP String: NSTS-- onkyo-vis.0 2018-03-20 19:20:17.001 info EISCP String: NTR----/---- onkyo-vis.0 2018-03-20 19:20:16.445 info EISCP String: NTM00:56/--:-- onkyo-vis.0 2018-03-20 19:20:10.944 info EISCP String: SCTN/A onkyo-vis.0 2018-03-20 19:20:10.429 info EISCP String: SCHN/A onkyo-vis.0 2018-03-20 19:20:09.929 info EISCP String: STIN/A onkyo-vis.0 2018-03-20 19:20:09.421 info EISCP String: SATN/A onkyo-vis.0 2018-03-20 19:20:08.928 info EISCP String: SCNN/A onkyo-vis.0 2018-03-20 19:20:05.950 info EISCP String: PRS00 onkyo-vis.0 2018-03-20 19:20:04.939 info EISCP String: MOT00 onkyo-vis.0 2018-03-20 19:20:04.403 info EISCP String: DVLN/A onkyo-vis.0 2018-03-20 19:20:03.895 info EISCP String: ADV00 onkyo-vis.0 2018-03-20 19:20:03.419 info EISCP String: ADQ00 onkyo-vis.0 2018-03-20 19:20:02.891 info EISCP String: ADY00 onkyo-vis.0 2018-03-20 19:20:02.404 info EISCP String: RAS00 onkyo-vis.0 2018-03-20 19:20:01.898 info EISCP String: LTN00 onkyo-vis.0 2018-03-20 19:20:01.410 info EISCP String: LMD0C onkyo-vis.0 2018-03-20 19:19:59.883 info EISCP String: ISFN/A onkyo-vis.0 2018-03-20 19:19:58.902 info EISCP String: HAO02 onkyo-vis.0 2018-03-20 19:19:57.385 info EISCP String: SLA04 onkyo-vis.0 2018-03-20 19:19:56.398 info EISCP String: SLI10 onkyo-vis.0 2018-03-20 19:19:55.384 info EISCP String: IFAAnalog,,,,All Ch Stereo,5.1 ch, onkyo-vis.0 2018-03-20 19:19:54.874 info EISCP String: DIM00 onkyo-vis.0 2018-03-20 19:19:54.373 info EISCP String: DIF00 onkyo-vis.0 2018-03-20 19:19:53.864 info EISCP String: CTL-7 onkyo-vis.0 2018-03-20 19:19:53.362 info EISCP String: SWL-2 onkyo-vis.0 2018-03-20 19:19:52.871 info EISCP String: SLP00 onkyo-vis.0 2018-03-20 19:19:50.768 info Initial query: master-volume onkyo-vis.0 2018-03-20 19:19:50.768 info Initial query: volume onkyo-vis.0 2018-03-20 19:19:50.768 info Initial query: audio-muting onkyo-vis.0 2018-03-20 19:19:50.767 info Initial query: system-power onkyo-vis.0 2018-03-20 19:19:50.766 info Initial query: input-selector onkyo-vis.0 2018-03-20 19:19:49.361 info EISCP String: TFRB-2T-2 onkyo-vis.0 2018-03-20 19:19:48.871 info EISCP String: MVL1B onkyo-vis.0 2018-03-20 19:19:48.360 info EISCP String: MVL1B onkyo-vis.0 2018-03-20 19:19:47.874 info EISCP String: SPLN/A onkyo-vis.0 2018-03-20 19:19:47.346 info EISCP String: SPBN/A onkyo-vis.0 2018-03-20 19:19:46.860 info EISCP String: SPAN/A onkyo-vis.0 2018-03-20 19:19:46.338 info EISCP String: AMT00 onkyo-vis.0 2018-03-20 19:19:45.846 info EISCP String: PWR01 onkyo-vis.0 2018-03-20 19:19:45.763 error Error: ERROR (arg_not_exist) Argument query does not exist in command listening-mode onkyo-vis.0 2018-03-20 19:19:45.762 error Error: ERROR (arg_not_exist) Argument query does not exist in command internet-radio-preset onkyo-vis.0 2018-03-20 19:19:45.762 error Error: ERROR (arg_not_exist) Argument query does not exist in command net-tune-network onkyo-vis.0 2018-03-20 19:19:45.757 error Error: ERROR (arg_not_exist) Argument query does not exist in command dab-display-info onkyo-vis.0 2018-03-20 19:19:45.755 error Error: ERROR (arg_not_exist) Argument query does not exist in command ipod-list-info onkyo-vis.0 2018-03-20 19:19:45.751 error Error: ERROR (arg_not_exist) Argument query does not exist in command universal-port onkyo-vis.0 2018-03-20 19:19:45.750 error Error: ERROR (arg_not_exist) Argument query does not exist in command cd-r-recorder onkyo-vis.0 2018-03-20 19:19:45.749 error Error: ERROR (arg_not_exist) Argument query does not exist in command md-recorder onkyo-vis.0 2018-03-20 19:19:45.748 error Error: ERROR (arg_not_exist) Argument query does not exist in command dvd-player onkyo-vis.0 2018-03-20 19:19:45.747 error Error: ERROR (arg_not_exist) Argument query does not exist in command dat-recorder onkyo-vis.0 2018-03-20 19:19:45.747 error Error: ERROR (arg_not_exist) Argument query does not exist in command graphics-equalizer onkyo-vis.0 2018-03-20 19:19:45.746 error Error: ERROR (arg_not_exist) Argument query does not exist in command tape2-b onkyo-vis.0 2018-03-20 19:19:45.745 error Error: ERROR (arg_not_exist) Argument query does not exist in command tape1-a onkyo-vis.0 2018-03-20 19:19:45.744 error Error: ERROR (arg_not_exist) Argument query does not exist in command cd-player onkyo-vis.0 2018-03-20 19:19:45.742 error Error: ERROR (arg_not_exist) Argument query does not exist in command net-popup-message onkyo-vis.0 2018-03-20 19:19:45.742 error Error: ERROR (arg_not_exist) Argument query does not exist in command net-keyboard onkyo-vis.0 2018-03-20 19:19:45.741 error Error: ERROR (arg_not_exist) Argument query does not exist in command net-service onkyo-vis.0 2018-03-20 19:19:45.740 error Error: ERROR (arg_not_exist) Argument query does not exist in command net-usb-jacket-art onkyo-vis.0 2018-03-20 19:19:45.739 error Error: ERROR (arg_not_exist) Argument query does not exist in command net-usb-list-info onkyo-vis.0 2018-03-20 19:19:45.738 error Error: ERROR (arg_not_exist) Argument query does not exist in command internet-radio-preset onkyo-vis.0 2018-03-20 19:19:45.734 error Error: ERROR (arg_not_exist) Argument query does not exist in command network-usb onkyo-vis.0 2018-03-20 19:19:45.728 error Error: ERROR (arg_not_exist) Argument query does not exist in command sirius-parental-lock onkyo-vis.0 2018-03-20 19:19:45.725 error Error: ERROR (arg_not_exist) Argument query does not exist in command tp-scan onkyo-vis.0 2018-03-20 19:19:45.724 error Error: ERROR (arg_not_exist) Argument query does not exist in command pty-scan onkyo-vis.0 2018-03-20 19:19:45.722 error Error: ERROR (arg_not_exist) Argument query does not exist in command rds-information onkyo-vis.0 2018-03-20 19:19:45.721 error Error: ERROR (arg_not_exist) Argument query does not exist in command preset-memory onkyo-vis.0 2018-03-20 19:19:45.707 error Error: ERROR (arg_not_exist) Argument query does not exist in command 12v-trigger-c onkyo-vis.0 2018-03-20 19:19:45.706 error Error: ERROR (arg_not_exist) Argument query does not exist in command 12v-trigger-b onkyo-vis.0 2018-03-20 19:19:45.706 error Error: ERROR (arg_not_exist) Argument query does not exist in command 12v-trigger-a onkyo-vis.0 2018-03-20 19:19:45.704 error Error: ERROR (arg_not_exist) Argument query does not exist in command memory-setup onkyo-vis.0 2018-03-20 19:19:45.703 error Error: ERROR (arg_not_exist) Argument query does not exist in command setup onkyo-vis.0 2018-03-20 19:19:45.701 error Error: ERROR (arg_not_exist) Argument query does not exist in command speaker-level-calibration onkyo-vis.0 2018-03-20 19:19:45.678 info Successfully connected to AVR onkyo-vis.0 2018-03-20 19:19:45.625 info Connecting to AVR 192.168.178.43:60128 onkyo-vis.0 2018-03-20 19:19:45.295 info Create new object: onkyo-vis.0.Video_Information, role = switch onkyo-vis.0 2018-03-20 19:19:45.294 info My array objects: onkyo-vis.0.Video_Information, role = switch onkyo-vis.0 2018-03-20 19:19:45.294 info Create new object: onkyo-vis.0.Audio_Information, role = switch onkyo-vis.0 2018-03-20 19:19:45.294 info My array objects: onkyo-vis.0.Audio_Information, role = switch onkyo-vis.0 2018-03-20 19:19:45.292 info Create new object: onkyo-vis.0.Listening_Mode, role = switch onkyo-vis.0 2018-03-20 19:19:45.291 info My array objects: onkyo-vis.0.Listening_Mode, role = switch onkyo-vis.0 2018-03-20 19:19:45.290 info Create new object: onkyo-vis.0.Tuner_Preset_Zone2, role = switch onkyo-vis.0 2018-03-20 19:19:45.289 info My array objects: onkyo-vis.0.Tuner_Preset_Zone2, role = switch onkyo-vis.0 2018-03-20 19:19:45.286 info Create new object: onkyo-vis.0.Tuner_Preset_Zone1, role = switch onkyo-vis.0 2018-03-20 19:19:45.285 info My array objects: onkyo-vis.0.Tuner_Preset_Zone1, role = switch onkyo-vis.0 2018-03-20 19:19:45.284 info Create new object: onkyo-vis.0.Audio_Mute_Zone2, role = switch onkyo-vis.0 2018-03-20 19:19:45.283 info My array objects: onkyo-vis.0.Audio_Mute_Zone2, role = switch onkyo-vis.0 2018-03-20 19:19:45.281 info Create new object: onkyo-vis.0.Audio_Mute_Zone1, role = switch onkyo-vis.0 2018-03-20 19:19:45.281 info My array objects: onkyo-vis.0.Audio_Mute_Zone1, role = switch onkyo-vis.0 2018-03-20 19:19:45.281 info Create new object: onkyo-vis.0.Input_Select_Zone2, role = switch onkyo-vis.0 2018-03-20 19:19:45.280 info My array objects: onkyo-vis.0.Input_Select_Zone2, role = switch onkyo-vis.0 2018-03-20 19:19:45.279 info Create new object: onkyo-vis.0.Input_Select_Zone1, role = switch onkyo-vis.0 2018-03-20 19:19:45.278 info My array objects: onkyo-vis.0.Input_Select_Zone1, role = switch onkyo-vis.0 2018-03-20 19:19:45.276 info Create new object: onkyo-vis.0.Internet_Radio_Preset_Zone2, role = switch onkyo-vis.0 2018-03-20 19:19:45.275 info My array objects: onkyo-vis.0.Internet_Radio_Preset_Zone2, role = switch onkyo-vis.0 2018-03-20 19:19:45.273 info Create new object: onkyo-vis.0.Internet_Radio_Preset_Zone1, role = switch onkyo-vis.0 2018-03-20 19:19:45.272 info My array objects: onkyo-vis.0.Internet_Radio_Preset_Zone1, role = switch onkyo-vis.0 2018-03-20 19:19:45.272 info Create new object: onkyo-vis.0.Tuning_Zone2, role = switch onkyo-vis.0 2018-03-20 19:19:45.272 info My array objects: onkyo-vis.0.Tuning_Zone2, role = switch onkyo-vis.0 2018-03-20 19:19:45.271 info Create new object: onkyo-vis.0.Tuning_Zone1, role = switch onkyo-vis.0 2018-03-20 19:19:45.271 info My array objects: onkyo-vis.0.Tuning_Zone1, role = switch onkyo-vis.0 2018-03-20 19:19:45.270 info Create new object: onkyo-vis.0.Volume_Zone2, role = switch onkyo-vis.0 2018-03-20 19:19:45.270 info My array objects: onkyo-vis.0.Volume_Zone2, role = switch onkyo-vis.0 2018-03-20 19:19:45.269 info Create new object: onkyo-vis.0.Volume_Zone1, role = switch onkyo-vis.0 2018-03-20 19:19:45.269 info My array objects: onkyo-vis.0.Volume_Zone1, role = switch onkyo-vis.0 2018-03-20 19:19:45.269 info Create new object: onkyo-vis.0.NET_Shuffle_Status, role = switch onkyo-vis.0 2018-03-20 19:19:45.268 info My array objects: onkyo-vis.0.NET_Shuffle_Status, role = switch onkyo-vis.0 2018-03-20 19:19:45.268 info Create new object: onkyo-vis.0.NET_Repeat_Status, role = switch onkyo-vis.0 2018-03-20 19:19:45.268 info My array objects: onkyo-vis.0.NET_Repeat_Status, role = switch onkyo-vis.0 2018-03-20 19:19:45.267 info Create new object: onkyo-vis.0.NET_Play_Status, role = switch onkyo-vis.0 2018-03-20 19:19:45.267 info My array objects: onkyo-vis.0.NET_Play_Status, role = switch onkyo-vis.0 2018-03-20 19:19:45.266 info Create new object: onkyo-vis.0.NET/USB_Track_Info, role = switch onkyo-vis.0 2018-03-20 19:19:45.265 info My array objects: onkyo-vis.0.NET/USB_Track_Info, role = switch onkyo-vis.0 2018-03-20 19:19:45.264 info Create new object: onkyo-vis.0.NET/USB_Album_Name_Info, role = switch onkyo-vis.0 2018-03-20 19:19:45.264 info My array objects: onkyo-vis.0.NET/USB_Album_Name_Info, role = switch onkyo-vis.0 2018-03-20 19:19:45.263 info Create new object: onkyo-vis.0.NET/USB_Time, role = switch onkyo-vis.0 2018-03-20 19:19:45.262 info My array objects: onkyo-vis.0.NET/USB_Time, role = switch onkyo-vis.0 2018-03-20 19:19:45.261 info Create new object: onkyo-vis.0.NET/USB_Time_Current, role = switch onkyo-vis.0 2018-03-20 19:19:45.260 info My array objects: onkyo-vis.0.NET/USB_Time_Current, role = switch onkyo-vis.0 2018-03-20 19:19:45.259 info Create new object: onkyo-vis.0.NET/USB_Time_Info, role = switch onkyo-vis.0 2018-03-20 19:19:45.258 info My array objects: onkyo-vis.0.NET/USB_Time_Info, role = switch onkyo-vis.0 2018-03-20 19:19:45.257 info Create new object: onkyo-vis.0.NET/USB_Title_Name, role = switch onkyo-vis.0 2018-03-20 19:19:45.257 info My array objects: onkyo-vis.0.NET/USB_Title_Name, role = switch onkyo-vis.0 2018-03-20 19:19:45.256 info Create new object: onkyo-vis.0.NET/USB_Artist_Name_Info, role = switch onkyo-vis.0 2018-03-20 19:19:45.255 info My array objects: onkyo-vis.0.NET/USB_Artist_Name_Info, role = switch onkyo-vis.0 2018-03-20 19:19:45.254 info Create new object: onkyo-vis.0.Power_Zone2, role = switch onkyo-vis.0 2018-03-20 19:19:45.253 info My array objects: onkyo-vis.0.Power_Zone2, role = switch onkyo-vis.0 2018-03-20 19:19:45.252 info Create new object: onkyo-vis.0.Power_Zone1, role = switch onkyo-vis.0 2018-03-20 19:19:45.250 info My array objects: onkyo-vis.0.Power_Zone1, role = switch onkyo-vis.0 2018-03-20 19:19:45.234 info Create new object: onkyo-vis.0.command, role = switch onkyo-vis.0 2018-03-20 19:19:45.233 info My array objects: onkyo-vis.0.command, role = switch onkyo-vis.0 2018-03-20 19:19:45.218 info starting. Version 1.0.2 in /opt/iobroker/node_modules/iobroker.onkyo-vis, node: v6.12.0 onkyo-vis.0 2018-03-20 19:19:45.159 info States connected to redis: 127.0.0.1:6379 -
Hi Vossi80
Leider sind in den Log´s keine Debug infos mit drin. Kannst du in iobroker bitte die folgenden 3 Einstellungen setzen und das ganze nochmals testen. Es reicht aber auch schon aus, wenn du in command einmal PWR00 und PWR01 setzt. Das Log sollte dann Meldungen mit Debug enthalten. Wie im letzten Screenshot.
Gruß Eisbaeeer
-
Hab dir den Log mal in eine Datei gepackt. War für 3 min ganz schön groß. Hoffe du kannst da was raus lesen
6387_log.rtf -
Ach ja. Bitte unbedingt den Loglevel auch wieder auf Info zurückstellen!
-
Hi Vossi80
Ein letzter Versuch, wenn du noch die Geduld mit mir hast
Mich irritiert, dass im Log als Befehl anstatt "PWR00" oder "PWR01" immer sowas hier steht: "0,"
Kannst du in VIS mal einen Testview anlegen, dort einen einfachen boolean Button (also z.B. Licht an/aus) ablegen und dort die Objekt-ID Power_Zone1 auswählen. Lässt er sich dann über VIS ein bzw. ausschalten?
Ich möchte damit nur ausschließen, dass bei deiner Eingabe unter Objekten etwas schief läuft. Ich hab sonst erstmal keine Idee mehr und wir müssten das mal auf nächste Woche verschieben. Da bin ich wieder zuhause und kann an meinem Onkyo testen.
Gruß Eisbaeeer
-
Ok gerne probiere ich das allerdings schaffe ich das heut nicht mehr weil die Arbeit ruft
Werd mich morgen zurück melden…..
