Problem mit IO-Broker Reiter Adapter - Fehlermeldung

@Thomas-Braun
Also alle Updates erfolgreich erledigt.
Beim Start von IOBroker kann ich nun auch wieder den Reiter "Adapter" ohne Fehlermeldung öffnen.

Bleibt damit "nur" noch das Problem mit den IO-Adressen (die aus dem alten System im Backup übernommen wurden und dass die VIS sich nicht starten lässt.

Was soll ich als nächster schritt machen ?

Thomas Braun

@Frank-KNX sagte in Problem mit IO-Broker Reiter Adapter - Fehlermeldung:

Was soll ich als nächster schritt machen ?

Nochmal

iob diag

zeigen.
Den Befehl zum entbinden der IP hab ich gerade nicht parat. Steht bestimmt aber in der Doku drin.

Frank-KNX

@Thomas-Braun

hier das Ergebnis von iob diag:

Script v.2025-08-09

*** BASE SYSTEM ***
Operating System: Debian GNU/Linux 13 (trixie)
 Static hostname: visu
       Icon name: computer
          Kernel: Linux 6.12.62+rpt-rpi-2712
    Architecture: arm64
OS is similar to:

Model           : Raspberry Pi 5 Model B Rev 1.1
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 64 bit

Systemuptime and Load:
 14:08:22 up  1:24,  1 user,  load average: 0.71, 0.57, 0.49
CPU threads: 4


*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'trixie'!

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** TIME AND TIMEZONES ***
               Local time: Sat 2026-01-10 14:08:22 CET
           Universal time: Sat 2026-01-10 13:08:22 UTC
                 RTC time: Sat 2026-01-10 13:08:22
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
visadmin
HOME=/home/visadmin
GROUPS=visadmin adm dialout cdrom sudo audio video plugdev games users netdev gpio i2c spi render input iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
SUDO_HOME=/home/visadmin
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

*** DISPLAY-SERVER SETUP ***
Display-Server:         false
Unit display-manager.service could not be found.
Display-Manager:
Desktop:
Session:                tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            8.5G        1.3G        6.6G         15M        614M        7.1G
Swap:           2.1G          0B        2.1G
Total:           10G        1.3G        8.8G

Active iob-Instances:   10

         8058 M total memory
         1261 M used memory
         1149 M active memory
          301 M inactive memory
         6306 M free memory
           68 M buffer memory
          516 M swap cache
         2047 M total swap
            0 M used swap
         2047 M free swap

*** top - Table Of Processes  ***
top - 14:08:23 up  1:24,  1 user,  load average: 0.71, 0.57, 0.49
Tasks: 192 total,   1 running, 191 sleeping,   0 stopped,   0 zombie
%Cpu(s):  2.2 us,  0.0 sy,  0.0 ni, 97.8 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   8058.9 total,   6303.0 free,   1263.7 used,    587.6 buff/cache
MiB Swap:   2048.0 total,   2048.0 free,      0.0 used.   6795.3 avail Mem

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION

0 loaded units listed.


*** DMESG CRITICAL ERRORS ***
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  3.9G     0  3.9G   0% /dev
tmpfs          tmpfs     1.6G   14M  1.6G   1% /run
/dev/mmcblk0p2 ext4       58G  6.9G   48G  13% /
tmpfs          tmpfs     4.0G     0  4.0G   0% /dev/shm
tmpfs          tmpfs     5.0M   48K  5.0M   1% /run/lock
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/systemd-journald.service
tmpfs          tmpfs     4.0G  1.5M  4.0G   1% /tmp
/dev/mmcblk0p1 vfat      510M   66M  445M  13% /boot/firmware
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/getty@tty1.service
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/serial-getty@ttyAMA10.service
tmpfs          tmpfs     806M   32K  806M   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Sat Jan 10 12:44:12 2026] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0  numa=fake=8 system_heap.max_order=0 iommu_dma_numa_policy=interleave smsc95xx.macaddr=2C:CF:67:CC:31:18 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000  console=ttyAMA10,115200 console=tty1 root=PARTUUID=45188717-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=DE
[Sat Jan 10 12:44:16 2026] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[Sat Jan 10 12:44:16 2026] EXT4-fs (mmcblk0p2): mounted filesystem 21724cc6-e5a3-48a1-8643-7917dba3a9fb ro with ordered data mode. Quota mode: none.
[Sat Jan 10 12:44:18 2026] EXT4-fs (mmcblk0p2): re-mounted 21724cc6-e5a3-48a1-8643-7917dba3a9fb r/w.

Show mounted filesystems:
TARGET           SOURCE         FSTYPE OPTIONS
/                /dev/mmcblk0p2 ext4   rw,noatime,commit=600
`-/boot/firmware /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
2.5G    /var/
231M    /var/cache
225M    /var/cache/apt
181M    /var/lib
145M    /var/lib/apt

Archived and active journals take up 8M in the file system.

/opt/iobroker/backups:
17M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
256M    /opt/iobroker/iobroker-data/
230M    /opt/iobroker/iobroker-data/files
47M     /opt/iobroker/iobroker-data/files/admin.admin
46M     /opt/iobroker/iobroker-data/files/admin.admin/custom/assets
46M     /opt/iobroker/iobroker-data/files/admin.admin/custom

The five largest files in iobroker-data are:
30M     /opt/iobroker/iobroker-data/files/notification-manager.admin/build/index.js.map
11M     /opt/iobroker/iobroker-data/files/notification-manager.admin/build/index.js
9.8M    /opt/iobroker/iobroker-data/files/vis-2/material-icons/knx-uf.json
9.6M    /opt/iobroker/iobroker-data/objects.jsonl
8.1M    /opt/iobroker/iobroker-data/files/backitup.admin/assets/index-Djx0nwYT.js

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

No Devices found 'by-id'

Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


*** NodeJS-Installation ***

/usr/bin/nodejs         v22.21.0
/usr/bin/node           v22.21.0
/usr/bin/npm            10.9.4
/usr/bin/npx            10.9.4
/usr/bin/corepack       0.34.0

nodejs:
  Installed: 22.21.0-1nodesource1
  Candidate: 22.21.0-1nodesource1
  Version table:
 *** 22.21.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     22.20.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.4.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     20.19.2+dfsg-1 500
        500 http://deb.debian.org/debian trixie/main arm64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

Checking for nodejs vulnerability:


 █████  ██      ██           ██████   ██████   ██████  ██████         ██
██   ██ ██      ██          ██       ██    ██ ██    ██ ██   ██     ██  ██
███████ ██      ██          ██   ███ ██    ██ ██    ██ ██   ██         ██
██   ██ ██      ██          ██    ██ ██    ██ ██    ██ ██   ██     ██  ██
██   ██ ███████ ███████      ██████   ██████   ██████  ██████         ██



*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
visu                visu (version: 7.0.7, hostname: visu          , alive, uptime: 5044)

Core adapters versions
js-controller:  7.0.7
admin:          7.7.19
javascript:     9.0.11

nodejs modules from github:     0

Adapter State
+ system.adapter.admin.0                  : admin                 : visu                                     -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.backitup.0               : backitup              : visu                                     -  enabled
+ system.adapter.discovery.0              : discovery             : visu                                     -  enabled
  system.adapter.ical.0                   : ical                  : visu                                     -  enabled
  system.adapter.icons-mfd-png.0          : icons-mfd-png         : visu                                     - disabled
  system.adapter.info.0                   : info                  : visu                                     -  enabled
+ system.adapter.javascript.0             : javascript            : visu                                     -  enabled
+ system.adapter.knx.0                    : knx                   : visu                                     -  enabled, bind: 192.168.2.98
+ system.adapter.linux-control.0          : linux-control         : visu                                     -  enabled
+ system.adapter.node-red.0               : node-red              : visu                                     -  enabled, port: 1880, bind: 192.168.2.98
+ system.adapter.trashschedule.0          : trashschedule         : visu                                     -  enabled
+ system.adapter.upnp.0                   : upnp                  : visu                                     -  enabled
  system.adapter.vis-bars.0               : vis-bars              : visu                                     - disabled
  system.adapter.vis-colorpicker.0        : vis-colorpicker       : visu                                     - disabled
  system.adapter.vis-fancyswitch.0        : vis-fancyswitch       : visu                                     - disabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : visu                                     - disabled
  system.adapter.vis-jqui-mfd.0           : vis-jqui-mfd          : visu                                     - disabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : visu                                     - disabled
  system.adapter.vis.0                    : vis                   : visu                                     -  enabled
  system.adapter.web.0                    : web                   : visu                                     - disabled, port: 8082, bind: 0.0.0.0, run as: admin

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : visu                                     -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.node-red.0               : node-red              : visu                                     -  enabled, port: 1880, bind: 192.168.2.98

ioBroker-Repositories
┌────────────────────────────────────────────────────────────────────────────────────────────────────────
│ (index) │ name               │ url                                                     │ auto upgrade │
├────────────────────────────────────────────────────────────────────────────────────────────────────────
│ 0       │ 'Stable (default)' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'Beta (latest)'    │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└────────────────────────────────────────────────────────────────────────────────────────────────────────

Active repo(s): Stable (default)
Upgrade policy: none

Installed ioBroker-Adapters
Used repository: Stable (default)
Adapter    "admin"        : 7.7.19   , installed 7.7.19
Adapter    "backitup"     : 3.3.13   , installed 3.3.13
Adapter    "discovery"    : 5.0.0    , installed 5.0.0
Adapter    "ical"         : 1.18.1   , installed 1.18.1
Adapter    "icons-mfd-png": 1.2.1    , installed 1.2.1
Adapter    "javascript"   : 9.0.11   , installed 9.0.11
Controller "js-controller": 7.0.7    , installed 7.0.7
Adapter    "knx"          : 2.0.30   , installed 2.0.30
Adapter    "linux-control": 1.1.5    , installed 1.1.5
Adapter    "node-red"     : 5.2.1    , installed 5.2.1
Adapter    "socketio"     : 6.7.1    , installed 7.0.8
Adapter    "trashschedule": 3.3.0    , installed 3.3.0
Adapter    "upnp"         : 1.1.0    , installed 1.1.0
Adapter    "vis"          : 1.5.6    , installed 1.5.6
Adapter    "vis-bars"     : 0.1.4    , installed 0.1.4
Adapter    "vis-colorpicker": 2.0.3  , installed 2.0.3
Adapter    "vis-fancyswitch": 1.1.0  , installed 1.1.0
Adapter    "vis-hqwidgets": 1.5.1    , installed 1.5.1
Adapter    "vis-jqui-mfd" : 1.1.1    , installed 1.1.1
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "web"          : 7.0.8    , installed 7.0.8
Adapter    "ws"           : 2.6.2    , installed 2.6.2

Objects and States
Please stand by - This may take a while
Objects:        3148
States:         2244

*** OS-Repositories and Updates ***
W: https://deb.nodesource.com/node_22.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details
Hit:1 http://deb.debian.org/debian trixie InRelease
Hit:2 http://archive.raspberrypi.com/debian trixie InRelease
Hit:3 http://deb.debian.org/debian trixie-updates InRelease
Hit:4 http://deb.debian.org/debian-security trixie-security InRelease
Hit:5 https://deb.nodesource.com/node_22.x nodistro InRelease
Reading package lists...
W: https://deb.nodesource.com/node_22.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details
Pending Updates: 38

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          6132       1179/sshd: /usr/sbi
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          895        1/init
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       7805       1165/iobroker.js-co
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       7800       1165/iobroker.js-co
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       7054       1201/io.admin.0
tcp6       0      0 :::22                   :::*                    LISTEN      0          6134       1179/sshd: /usr/sbi
tcp6       0      0 :::111                  :::*                    LISTEN      0          4699       1/init
udp        0      0 0.0.0.0:36212           0.0.0.0:*                           1001       12839      1387/io.knx.0
udp        0      0 0.0.0.0:44405           0.0.0.0:*                           1001       51544      1387/io.knx.0
udp        0      0 0.0.0.0:44405           0.0.0.0:*                           1001       41357      1387/io.knx.0
udp        0      0 0.0.0.0:48503           0.0.0.0:*                           1001       32708      1387/io.knx.0
udp        0      0 0.0.0.0:56695           0.0.0.0:*                           1001       32257      1387/io.knx.0
   .....   
udp
udp6       0      0 :::111                  :::*                                0          896        1/init
udp6       0      0 fe80::2ecf:67ff:fec:546 :::*                                0          8367       756/NetworkManager
udp6       0      0 :::5353                 :::*                                101        6665       692/avahi-daemon: r
udp6       0      0 :::43211                :::*                                101        6667       692/avahi-daemon: r

*** Log File - Last 25 Lines ***

2026-01-10 14:08:56.204  - info: knx.0 (1387) Change state from STATE_NOT_CONNECTED(0) to STATE_NOT_CONNECTED(0)
2026-01-10 14:08:56.204  - info: knx.0 (1387)  Connection persists.....closing now
2026-01-10 14:08:56.204  - info: knx.0 (1387)  ... not able to close connection, because already closed
2026-01-10 14:08:56.204  - info: knx.0 (1387)  STATE_NOT_CONNECTED : Stop connection :  STATE_NOT_CONNECTED(0) to STATE_NOT_CONNECTED(0).
2026-01-10 14:08:57.204  - info: knx.0 (1387) Using UDP with local IP: 192.168.2.98
2026-01-10 14:08:57.204  - info: knx.0 (1387) Change state from STATE_NOT_CONNECTED(0) to STATE_OPENING_PORT(1)
2026-01-10 14:08:57.204  - info: knx.0 (1387) Change state from STATE_OPENING_PORT(1) to STATE_NOT_CONNECTED(0)
2026-01-10 14:08:57.205  - info: knx.0 (1387)  Connection persists.....closing now
2026-01-10 14:08:57.205  - info: knx.0 (1387)  ... not able to close connection, because already closed
2026-01-10 14:08:57.205  - info: knx.0 (1387)  STATE_NOT_CONNECTED : Try to connect / reconnect :  STATE_OPENING_PORT(1) to STATE_NOT_CONNECTED(0).
2026-01-10 14:08:59.205  - info: knx.0 (1387) Event : UDP - listening
2026-01-10 14:08:59.205  - info: knx.0 (1387) Change state from STATE_NOT_CONNECTED(0) to STATE_PORT_OPENED(2)
2026-01-10 14:08:59.205  - info: knx.0 (1387)  STATE_PORT_OPENED : no defined handling for transition from State:  STATE_NOT_CONNECTED(0) to STATE_PORT_OPENED(2).
2026-01-10 14:08:59.205  - info: knx.0 (1387) Connected  - local UDP Server listening on 192.168.2.98:57067
2026-01-10 14:08:59.205  - info: knx.0 (1387) Send : UDP Connection State Request :  06 10 02 07 00 10 00 00 08 01 00 00 00 00 aa c6     sent from Port:  to 192.168.2.99:3671
2026-01-10 14:08:59.206  - info: knx.0 (1387) Change state from STATE_PORT_OPENED(2) to STATE_CONNECTION_STATE_REQUEST(5)
2026-01-10 14:08:59.206  - info: knx.0 (1387)  STATE_CONNECTION_STATE_REQUEST : no defined handling for transition from State:  STATE_PORT_OPENED(2) to STATE_CONNECTION_STATE_REQUEST(5).
2026-01-10 14:08:59.207  - info: knx.0 (1387) Received CONNECTIONSTATE_RESPONSE :    06 10 02 08 00 08 00 21                                                              192.168.2.99:3671 ChID : 0 SeqCntIN : 0 SeqCntOUT : 0  msgCode : [object Object]
2026-01-10 14:08:59.207  - info: knx.0 (1387) Change state from STATE_CONNECTION_STATE_REQUEST(5) to STATE_CONNECTION_STATE_RESPONSE(6)
2026-01-10 14:08:59.208  - info: knx.0 (1387) Change state from STATE_CONNECTION_STATE_RESPONSE(6) to STATE_DISCONNECT_REQUEST(15)
2026-01-10 14:08:59.208  - info: knx.0 (1387)  STATE_DISCONNECT_REQUEST : no defined handling for transition from State: STATE_CONNECTION_STATE_RESPONSE(6) to STATE_DISCONNECT_REQUEST(15).
2026-01-10 14:08:59.208  - info: knx.0 (1387) Change state from STATE_DISCONNECT_REQUEST(15) to STATE_NOT_CONNECTED(0)
2026-01-10 14:08:59.208  - info: knx.0 (1387)  Connection persists.....closing now
2026-01-10 14:08:59.208  - info: knx.0 (1387)  ... not able to close connection, because already closed
2026-01-10 14:08:59.208  - info: knx.0 (1387)  STATE_NOT_CONNECTED : Try to connect / reconnect :  STATE_DISCONNECT_REQUEST(15) to STATE_NOT_CONNECTED(0).

============ Mark until here for C&P =============

Thomas Braun

@Frank-KNX sagte in Problem mit IO-Broker Reiter Adapter - Fehlermeldung:

Pending Updates: 38

Einspielen. Das ist Trixie 13.3 dann.

Homoran

@Thomas-Braun sagte in Problem mit IO-Broker Reiter Adapter - Fehlermeldung:

Den Befehl zum entbinden der IP hab ich gerade nicht parat

@frank-knx
muss doch auch in der Konfiguration der Instanz gehen.

zeig die mal

Frank-KNX

@Thomas-Braun

Ich kann deinem Kommentar leider nicht folgen. Ich stehe wohl "wieder" auf dem Schlauch.

Was soll ich machen ?

Thomas Braun

@Frank-KNX sagte in Problem mit IO-Broker Reiter Adapter - Fehlermeldung:

Was soll ich machen ?

Updates einspielen und damit das Betriebssystem auf Stand halten.
Wie üblich:

sudo apt update
iob stop
sudo apt full-upgrade
sudo reboot

Frank-KNX

@Homoran
Ich konnte im ersten Bild (siehe Anhang keine Manuelle IP-Adresse eintragen. Lediglich aus einer Auswahl etwas auswählen. Nun tauchte auch die passende auf. Ich habe also die x.x.x.148 ausgewählt. In der Instanzen-Anzeige ist node-red nun auch grün ohne Fehlermeldung.
Allerdings in der Übersicht im IOBroker ist node-red unverändert mit der alten IP-Adresse x.x.x.98 gelistet (siehe zweites Bild).
Für mich ein Widerspruch und offenbar habe ich das Problem nicht ganz gelöst.

Einstellung Node-red.png

Frank-KNX

Thomas Braun

@Frank-KNX sagte in Problem mit IO-Broker Reiter Adapter - Fehlermeldung:

Allerdings in der Übersicht im IOBroker ist node-red unverändert mit der alten IP-Adresse x.x.x.98 gelistet (siehe zweites Bild).

Lad den Admin mal neu. Oder hau die Updates drauf und starte die Kiste komplett durch, dann erledigt sich das auch.

Homoran

@Frank-KNX sagte in Problem mit IO-Broker Reiter Adapter - Fehlermeldung:

Ich habe also die x.x.x.148

steht bei

@Frank-KNX sagte in Problem mit IO-Broker Reiter Adapter - Fehlermeldung:

einer Auswahl

nicht auch 0.0.0.0?

sonst rennst du da bald wieder rein.

Homoran

@Frank-KNX sagte in Problem mit IO-Broker Reiter Adapter - Fehlermeldung:

node-red unverändert mit der alten IP-Adresse x.x.x.98 gelistet (siehe zweites Bild).

Browsercache geleert?

Frank-KNX

@Thomas-Braun

hier der Stand nach der ganzen Befehlskette:

========== Start marking the full check here ===========

Script v.2025-08-09

*** BASE SYSTEM ***
Operating System: Debian GNU/Linux 13 (trixie)
 Static hostname: visu
       Icon name: computer
          Kernel: Linux 6.12.62+rpt-rpi-2712
    Architecture: arm64
OS is similar to:

Model           : Raspberry Pi 5 Model B Rev 1.1
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 64 bit

Systemuptime and Load:
 15:22:43 up 5 min,  1 user,  load average: 0.34, 0.27, 0.13
CPU threads: 4


*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'trixie'!

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** TIME AND TIMEZONES ***
               Local time: Sat 2026-01-10 15:22:43 CET
           Universal time: Sat 2026-01-10 14:22:43 UTC
                 RTC time: Sat 2026-01-10 14:22:43
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
visadmin
HOME=/home/visadmin
GROUPS=visadmin adm dialout cdrom sudo audio video plugdev games users netdev gpio i2c spi render input iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
SUDO_HOME=/home/visadmin
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

*** DISPLAY-SERVER SETUP ***
Display-Server:         false
Unit display-manager.service could not be found.
Display-Manager:
Desktop:
Session:                tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            8.5G        1.4G        6.6G         15M        612M        7.1G
Swap:           2.1G          0B        2.1G
Total:           10G        1.4G        8.7G

Active iob-Instances:   10

         8058 M total memory
         1295 M used memory
         1194 M active memory
          302 M inactive memory
         6272 M free memory
           67 M buffer memory
          516 M swap cache
         2047 M total swap
            0 M used swap
         2047 M free swap

*** top - Table Of Processes  ***
top - 15:22:43 up 5 min,  1 user,  load average: 0.34, 0.27, 0.13
Tasks: 206 total,   1 running, 205 sleeping,   0 stopped,   0 zombie
%Cpu(s):  0.0 us,  2.2 sy,  0.0 ni, 97.8 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   8058.9 total,   6270.1 free,   1296.8 used,    586.8 buff/cache
MiB Swap:   2048.0 total,   2048.0 free,      0.0 used.   6762.2 avail Mem

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION

0 loaded units listed.


*** DMESG CRITICAL ERRORS ***
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  3.9G     0  3.9G   0% /dev
tmpfs          tmpfs     1.6G   14M  1.6G   1% /run
/dev/mmcblk0p2 ext4       58G  6.9G   48G  13% /
tmpfs          tmpfs     4.0G     0  4.0G   0% /dev/shm
tmpfs          tmpfs     5.0M   48K  5.0M   1% /run/lock
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/systemd-journald.service
tmpfs          tmpfs     4.0G  1.5M  4.0G   1% /tmp
/dev/mmcblk0p1 vfat      510M   66M  445M  13% /boot/firmware
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/getty@tty1.service
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/serial-getty@ttyAMA10.service
tmpfs          tmpfs     806M   32K  806M   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Sat Jan 10 15:17:32 2026] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0  numa=fake=8 system_heap.max_order=0 iommu_dma_numa_policy=interleave smsc95xx.macaddr=2C:CF:67:CC:31:18 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000  console=ttyAMA10,115200 console=tty1 root=PARTUUID=45188717-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=DE
[Sat Jan 10 15:17:36 2026] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[Sat Jan 10 15:17:36 2026] EXT4-fs (mmcblk0p2): mounted filesystem 21724cc6-e5a3-48a1-8643-7917dba3a9fb ro with ordered data mode. Quota mode: none.
[Sat Jan 10 15:17:38 2026] EXT4-fs (mmcblk0p2): re-mounted 21724cc6-e5a3-48a1-8643-7917dba3a9fb r/w.

Show mounted filesystems:
TARGET           SOURCE         FSTYPE OPTIONS
/                /dev/mmcblk0p2 ext4   rw,noatime,commit=600
`-/boot/firmware /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
2.5G    /var/
230M    /var/cache
225M    /var/cache/apt
180M    /var/lib
145M    /var/lib/apt

Archived and active journals take up 8M in the file system.

/opt/iobroker/backups:
17M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
261M    /opt/iobroker/iobroker-data/
230M    /opt/iobroker/iobroker-data/files
47M     /opt/iobroker/iobroker-data/files/admin.admin
46M     /opt/iobroker/iobroker-data/files/admin.admin/custom/assets
46M     /opt/iobroker/iobroker-data/files/admin.admin/custom

The five largest files in iobroker-data are:
30M     /opt/iobroker/iobroker-data/files/notification-manager.admin/build/index.js.map
11M     /opt/iobroker/iobroker-data/objects.jsonl
11M     /opt/iobroker/iobroker-data/files/notification-manager.admin/build/index.js
9.8M    /opt/iobroker/iobroker-data/files/vis-2/material-icons/knx-uf.json
8.1M    /opt/iobroker/iobroker-data/files/backitup.admin/assets/index-Djx0nwYT.js

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

No Devices found 'by-id'

Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


*** NodeJS-Installation ***

/usr/bin/nodejs         v22.21.0
/usr/bin/node           v22.21.0
/usr/bin/npm            10.9.4
/usr/bin/npx            10.9.4
/usr/bin/corepack       0.34.0

nodejs:
  Installed: 22.21.0-1nodesource1
  Candidate: 22.21.0-1nodesource1
  Version table:
 *** 22.21.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     22.20.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.4.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     20.19.2+dfsg-1 500
        500 http://deb.debian.org/debian trixie/main arm64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

Checking for nodejs vulnerability:


 █████  ██      ██           ██████   ██████   ██████  ██████         ██
██   ██ ██      ██          ██       ██    ██ ██    ██ ██   ██     ██  ██
███████ ██      ██          ██   ███ ██    ██ ██    ██ ██   ██         ██
██   ██ ██      ██          ██    ██ ██    ██ ██    ██ ██   ██     ██  ██
██   ██ ███████ ███████      ██████   ██████   ██████  ██████         ██



*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
visu                visu (version: 7.0.7, hostname: visu          , alive, uptime: 304)

Core adapters versions
js-controller:  7.0.7
admin:          7.7.19
javascript:     9.0.11

nodejs modules from github:     0

Adapter State
+ system.adapter.admin.0                  : admin                 : visu                                     -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.backitup.0               : backitup              : visu                                     -  enabled
+ system.adapter.discovery.0              : discovery             : visu                                     -  enabled
  system.adapter.ical.0                   : ical                  : visu                                     -  enabled
  system.adapter.icons-mfd-png.0          : icons-mfd-png         : visu                                     - disabled
  system.adapter.info.0                   : info                  : visu                                     -  enabled
+ system.adapter.javascript.0             : javascript            : visu                                     -  enabled
+ system.adapter.knx.0                    : knx                   : visu                                     -  enabled, bind: 192.168.2.148
+ system.adapter.linux-control.0          : linux-control         : visu                                     -  enabled
+ system.adapter.node-red.0               : node-red              : visu                                     -  enabled, port: 1880, bind: 192.168.2.148
+ system.adapter.trashschedule.0          : trashschedule         : visu                                     -  enabled
+ system.adapter.upnp.0                   : upnp                  : visu                                     -  enabled
  system.adapter.vis-bars.0               : vis-bars              : visu                                     - disabled
  system.adapter.vis-colorpicker.0        : vis-colorpicker       : visu                                     - disabled
  system.adapter.vis-fancyswitch.0        : vis-fancyswitch       : visu                                     - disabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : visu                                     - disabled
  system.adapter.vis-jqui-mfd.0           : vis-jqui-mfd          : visu                                     - disabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : visu                                     - disabled
  system.adapter.vis.0                    : vis                   : visu                                     -  enabled
  system.adapter.web.0                    : web                   : visu                                     - disabled, port: 8082, bind: 0.0.0.0, run as: admin

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : visu                                     -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.node-red.0               : node-red              : visu                                     -  enabled, port: 1880, bind: 192.168.2.148

ioBroker-Repositories
┌────────────────────────────────────────────────────────────────────────────────────────────────────────
│ (index) │ name               │ url                                                     │ auto upgrade │
├────────────────────────────────────────────────────────────────────────────────────────────────────────
│ 0       │ 'Stable (default)' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'Beta (latest)'    │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└────────────────────────────────────────────────────────────────────────────────────────────────────────

Active repo(s): Stable (default)
Upgrade policy: none

Installed ioBroker-Adapters
Used repository: Stable (default)
Adapter    "admin"        : 7.7.19   , installed 7.7.19
Adapter    "backitup"     : 3.3.13   , installed 3.3.13
Adapter    "discovery"    : 5.0.0    , installed 5.0.0
Adapter    "ical"         : 1.18.1   , installed 1.18.1
Adapter    "icons-mfd-png": 1.2.1    , installed 1.2.1
Adapter    "javascript"   : 9.0.11   , installed 9.0.11
Controller "js-controller": 7.0.7    , installed 7.0.7
Adapter    "knx"          : 2.0.30   , installed 2.0.30
Adapter    "linux-control": 1.1.5    , installed 1.1.5
Adapter    "node-red"     : 5.2.1    , installed 5.2.1
Adapter    "socketio"     : 6.7.1    , installed 7.0.8
Adapter    "trashschedule": 3.3.0    , installed 3.3.0
Adapter    "upnp"         : 1.1.0    , installed 1.1.0
Adapter    "vis"          : 1.5.6    , installed 1.5.6
Adapter    "vis-bars"     : 0.1.4    , installed 0.1.4
Adapter    "vis-colorpicker": 2.0.3  , installed 2.0.3
Adapter    "vis-fancyswitch": 1.1.0  , installed 1.1.0
Adapter    "vis-hqwidgets": 1.5.1    , installed 1.5.1
Adapter    "vis-jqui-mfd" : 1.1.1    , installed 1.1.1
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "web"          : 7.0.8    , installed 7.0.8
Adapter    "ws"           : 2.6.2    , installed 2.6.2

Objects and States
Please stand by - This may take a while
Objects:        3148
States:         2265

*** OS-Repositories and Updates ***
W: https://deb.nodesource.com/node_22.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details
Hit:1 http://deb.debian.org/debian trixie InRelease
Hit:2 http://deb.debian.org/debian trixie-updates InRelease
Hit:3 http://archive.raspberrypi.com/debian trixie InRelease
Hit:4 http://deb.debian.org/debian-security trixie-security InRelease
Hit:5 https://deb.nodesource.com/node_22.x nodistro InRelease
Reading package lists...
W: https://deb.nodesource.com/node_22.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       9408       1168/iobroker.js-co
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       9399       1168/iobroker.js-co
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          6934       1184/sshd: /usr/sbi
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          282        1/init
tcp        0      0 192.168.2.148:1880      0.0.0.0:*               LISTEN      1001       7569       1292/node-red
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       10527      1536/io.admin.0
tcp6       0      0 :::22                   :::*                    LISTEN      0          6936       1184/sshd: /usr/sbi
tcp6       0      0 :::111                  :::*                    LISTEN      0          1187       1/init
udp        0      0 0.0.0.0:38243           0.0.0.0:*                           1001       10336      1456/io.upnp.0
udp        0      0 0.0.0.0:1900            0.0.0.0:*                           1001       8907       1456/io.upnp.0
udp        0      0 0.0.0.0:1900            0.0.0.0:*                           1001       8906       1456/io.upnp.0
udp        0      0 0.0.0.0:57433           0.0.0.0:*                           101        6542       696/avahi-daemon: r
udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          3458       1/init
udp        0      0 192.168.2.148:33747     0.0.0.0:*                           1001       9669       1348/io.knx.0
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           101        6540       696/avahi-daemon: r
udp6       0      0 :::57217                :::*                                101        6543       696/avahi-daemon: r
udp6       0      0 :::111                  :::*                                0          283        1/init
udp6       0      0 fe80::2ecf:67ff:fec:546 :::*                                0          7453       757/NetworkManager
udp6       0      0 :::5353                 :::*                                101        6541       696/avahi-daemon: r

*** Log File - Last 25 Lines ***

2026-01-10 15:23:13.396  - info: knx.0 (1348) =====> STATE_TUNNELING_ACK
2026-01-10 15:23:13.397  - info: knx.0 (1348) ( 4 ) Sending Tunnel_Request ACK  : 06 10 04 21 00 0a 04 ab 75 00   ChID : 171 SeqCntIN : 117 SeqCntOUT : 29 queue length : 0
2026-01-10 15:23:13.397  - info: knx.0 (1348) ( 4.b ) return to STATE_READY, processing : false
2026-01-10 15:23:13.397  - info: knx.0 (1348) Change state from STATE_TUNNELLING_ACK(14) to STATE_READY(7)
2026-01-10 15:23:13.423  - info: knx.0 (1348) ( 3.2 ) Received TUNNEL_REQUEST (WRITE - send ACK )         :    06 10 04 20 00 19 04 ab 76 00 29 00 bc d0 10 10 28 41 05 00 80 42 04 00 00   ChID: 171
2026-01-10 15:23:13.424  - info: knx.0 (1348) WRITE : mappedName : Hauptzaehler Leisung P2    dest : 5/0/65  val: 33   (DPT14.056) Hauptzaehler_Leisung_P2
2026-01-10 15:23:13.424  - info: knx.0 (1348) Change state from STATE_READY(7) to STATE_TUNNELLING_REQUEST(13)
2026-01-10 15:23:13.424  - info: knx.0 (1348) Change state from STATE_TUNNELLING_REQUEST(13) to STATE_TUNNELLING_ACK(14)
2026-01-10 15:23:13.424  - info: knx.0 (1348) =====> STATE_TUNNELING_ACK
2026-01-10 15:23:13.424  - info: knx.0 (1348) ( 4 ) Sending Tunnel_Request ACK  : 06 10 04 21 00 0a 04 ab 76 00   ChID : 171 SeqCntIN : 118 SeqCntOUT : 29 queue length : 0
2026-01-10 15:23:13.424  - info: knx.0 (1348) ( 4.b ) return to STATE_READY, processing : false
2026-01-10 15:23:13.424  - info: knx.0 (1348) Change state from STATE_TUNNELLING_ACK(14) to STATE_READY(7)
2026-01-10 15:23:13.451  - info: knx.0 (1348) ( 3.2 ) Received TUNNEL_REQUEST (WRITE - send ACK )         :    06 10 04 20 00 19 04 ab 77 00 29 00 bc d0 10 10 28 42 05 00 80 42 8c 00 00   ChID: 171
2026-01-10 15:23:13.451  - info: knx.0 (1348) WRITE : mappedName : Hauptzaehler Leisung P3    dest : 5/0/66  val: 70   (DPT14.056) Hauptzaehler_Leisung_P3
2026-01-10 15:23:13.451  - info: knx.0 (1348) Change state from STATE_READY(7) to STATE_TUNNELLING_REQUEST(13)
2026-01-10 15:23:13.451  - info: knx.0 (1348) Change state from STATE_TUNNELLING_REQUEST(13) to STATE_TUNNELLING_ACK(14)
2026-01-10 15:23:13.451  - info: knx.0 (1348) =====> STATE_TUNNELING_ACK
2026-01-10 15:23:13.452  - info: knx.0 (1348) ( 4 ) Sending Tunnel_Request ACK  : 06 10 04 21 00 0a 04 ab 77 00   ChID : 171 SeqCntIN : 119 SeqCntOUT : 29 queue length : 0
2026-01-10 15:23:13.452  - info: knx.0 (1348) ( 4.b ) return to STATE_READY, processing : false
2026-01-10 15:23:13.452  - info: knx.0 (1348) Change state from STATE_TUNNELLING_ACK(14) to STATE_READY(7)
2026-01-10 15:23:15.452  - info: knx.0 (1348) Send : UDP Connection State Request :  06 10 02 07 00 10 ab 00 08 01 00 00 00 00 83 d3     sent from Port:  to 192.168.2.99:3671
2026-01-10 15:23:15.452  - info: knx.0 (1348) Change state from STATE_READY(7) to STATE_CONNECTION_STATE_REQUEST(5)
2026-01-10 15:23:15.454  - info: knx.0 (1348) Received CONNECTIONSTATE_RESPONSE :    06 10 02 08 00 08 ab 00                                                              192.168.2.99:3671 ChID : 171 SeqCntIN : 119 SeqCntOUT : 29  msgCode : [object Object]
2026-01-10 15:23:15.454  - info: knx.0 (1348) Change state from STATE_CONNECTION_STATE_REQUEST(5) to STATE_CONNECTION_STATE_RESPONSE(6)
2026-01-10 15:23:15.454  - info: knx.0 (1348) Change state from STATE_CONNECTION_STATE_RESPONSE(6) to STATE_READY(7)

============ Mark until here for C&P =============

Frank-KNX

Nun noch folgende 2 Fehlerbilder:

Instanz info.0 fehlerhaft. Rot hinterlegt und beim Auswahl dieses Fehlerbild:

Homoran

@Frank-KNX sagte in Problem mit IO-Broker Reiter Adapter - Fehlermeldung:

Instanz info.0 fehlerhaft

lösch die.
Den Adapter gibt es nicht mehr

Frank-KNX

Fehler 2 ist Instanz VIS.0
Bei Anwahl folgender Bildschirm, dass nicht erreichbar.
VIS nicht verfügbar.jpg

Community Forum

NEWS

Problem mit IO-Broker Reiter Adapter - Fehlermeldung

Support us

505

32.6k

82.0k

1.3m