Jahresrückblick 2025 – unser neuer Blogbeitrag ist online! ✨

[Thomas Braun]

@marcelinho sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':

wie kann das sein?

Gehst du über die IP rein? Die hat sich vielleicht geändert. Ich nutze ausschließlich hostnames.

[marcelinho]

ja über die IP 192.168.2.198 Port 22 über Putty steht Network error: Connection refused. Über http://192.168.2.198:8081/ ist iobroker normal erreichbar. Über Eingabeaufforderung:

ping 192.168.2.198

Ping wird ausgeführt für 192.168.2.198 mit 32 Bytes Daten:
Antwort von 192.168.2.198: Bytes=32 Zeit=4ms TTL=64
Antwort von 192.168.2.198: Bytes=32 Zeit=5ms TTL=64
Antwort von 192.168.2.198: Bytes=32 Zeit=5ms TTL=64
Antwort von 192.168.2.198: Bytes=32 Zeit=5ms TTL=64

Ping-Statistik für 192.168.2.198:
    Pakete: Gesendet = 4, Empfangen = 4, Verloren = 0
    (0% Verlust),
Ca. Zeitangaben in Millisek.:
    Minimum = 4ms, Maximum = 5ms, Mittelwert = 4ms

[Thomas Braun]

@marcelinho

Geh mal ohne puTTY drauf.

[marcelinho]

@Thomas-Braun wie meinst du genau? Kann ich über das Webterminal in iobroker das nicht fixen?

[Thomas Braun]

@marcelinho sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':

Kann ich über das Webterminal in iobroker das nicht fixen?

Was für ein 'Webterminal'?

[marcelinho]

@Thomas-Braun https://www.iobroker.net/#en/adapters/adapterref/iobroker.terminal/README.md

[Thomas Braun]

@marcelinho

Ach der alte Troublemaker. Funktioniert der überhaupt noch?

systemctl status sshd.service 

sagt?

[marcelinho]

@Thomas-Braun

/opt/iobroker$ systemctl status sshd.service

Unit sshd.service could not be found.
/opt/iobroker$  

[Thomas Braun]

@marcelinho

Eigentlich muss der laufen. Ich weiß aber nicht ob das Ding in dem Adapter vollen Zugriff auf das System hat.

sudo apt update
apt policy openssh-server

[marcelinho]

ich bin verwirrt:

/opt/iobroker$ systemctl status sshd.service

Unit sshd.service could not be found.
/opt/iobroker$ sudo su -

sudo: a terminal is required to read the password; either use the -S option to read from standard input or configure an askpass helper
sudo: a password is required
/opt/iobroker$ iob diag

TERM environment variable not set.
*** iob diag is starting up, please wait ***
npm error code ELSPROBLEMS
npm error invalid: buffer@5.7.1 /opt/iobroker/node_modules/buffer
npm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2026-01-02T20_16_50_125Z-debug-0.log
TERM environment variable not set.

107*** ioBroker Diagnosis ***

Please stretch the window of your terminal programm (puTTY) as wide as possible or switch to full screen

The following checks may give hints to potential malconfigurations or errors, please post them in our forum:

https://forum.iobroker.net

Just copy and paste the Summary Page, including the ``` characters at start and end.
It helps us to help you!

**************************************************************************
* Some output is masked. For full results please use 'iob diag --unmask' *
**************************************************************************

Press any key to continue
 
/opt/iobroker$ 
/opt/iobroker$ sudo apt update

TERM environment variable not set.

========== Start marking the full check here ===========

```bash
Script v.2025-08-09

107*** BASE SYSTEM ***
Operating System: Debian GNU/Linux 12 (bookworm)
Static hostname: raspberrypi
       Icon name: computer
          Kernel: Linux 6.12.47+rpt-rpi-v8
    Architecture: arm64
OS is similar to:

Model        : Raspberry Pi 4 Model B Rev 1.5
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 64 bit

Systemuptime and Load:
21:18:05 up 53 min,  1 user,  load average: 0.31, 0.42, 0.59
CPU threads: 4


107*** LIFE CYCLE STATUS ***
Debian 'bookworm' is the current oldstable version. Please upgrade to the latest stable release 'trixie' in due time!

107*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

107*** TIME AND TIMEZONES ***
               Local time: Fri 2026-01-02 21:18:05 CET
           Universal time: Fri 2026-01-02 20:18:05 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

107*** Users and Groups ***
User that called 'iob diag':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

A default user should be created! This user will be enabled to temporarily switch to root via 'sudo'!
A root login is not required in most Linux Distributions.
Run 'iobroker fix' or use the system tools to create a user.
107*** DISPLAY-SERVER SETUP ***
Display-Server:     false
Unit display-manager.service could not be found.
Display-Manager:     
Desktop:         
Session:         

107*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            4.0G        3.0G        365M        610K        673M        966M
Swap:           209M        209M        516K
Total:          4.2G        3.2G        365M

Active iob-Instances:     28

         3796 M total memory
         2874 M used memory
         1981 M active memory
         1256 M inactive memory
          348 M free memory
           55 M buffer memory
          587 M swap cache
          199 M total swap
          199 M used swap
            0 M free swap

107*** top - Table Of Processes  ***
top - 21:18:06 up 54 min,  1 user,  load average: 0.31, 0.42, 0.59
Tasks: 232 total,   1 running, 231 sleeping,   0 stopped,   0 zombie
%Cpu(s): 11.1 us, 11.1 sy,  0.0 ni, 66.7 id, 11.1 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   3796.9 total,    348.3 free,   2874.9 used,    642.8 buff/cache    
MiB Swap:    200.0 total,      0.5 free,    199.5 used.    922.0 avail Mem

107*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.


107*** DMESG CRITICAL ERRORS ***
sudo: a terminal is required to read the password; either use the -S option to read from standard input or configure an askpass helper
sudo: a password is required
No critical errors detected

107*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.6G     0  1.6G   0% /dev
tmpfs          tmpfs     760M  1.2M  759M   1% /run
/dev/mmcblk0p2 ext4       29G   18G  9.3G  66% /
tmpfs          tmpfs     1.9G  8.0K  1.9G   1% /dev/shm
tmpfs          tmpfs     5.0M   16K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      510M   78M  433M  16% /boot/firmware
tmpfs          tmpfs     380M   40K  380M   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
sudo
: a terminal is required to read the password; either use the -S option to read from standard input or configure an askpass helper
sudo: a password is required

Show mounted filesystems:
TARGET           SOURCE         FSTYPE OPTIONS
/                /dev/mmcblk0p2 ext4   rw,noatime
`-/boot/firmware /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
sudo: a terminal is required to read the password; either use the -S option to read from standard input or configure an askpass helper
sudo: a password is required

Hint: You are currently not seeing messages from other users and the system.
      Users in groups 'adm', 'systemd-journal' can see all messages.
      Pass -q to turn off this notice.
Archived and active journals take up 170.2M in the file system.

/opt/iobroker/backups:
145M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
1.8G    /opt/iobroker/iobroker-data/
1.4G    /opt/iobroker/iobroker-data/history
236M    /opt/iobroker/iobroker-data/files
109M    /opt/iobroker/iobroker-data/backup-objects
47M    /opt/iobroker/iobroker-data/files/admin.admin

The five largest files in iobroker-data are:
49M    /opt/iobroker/iobroker-data/objects.jsonl
24M    /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js.map
9.8M    /opt/iobroker/iobroker-data/files/vis-2/material-icons/knx-uf.json
9.8M    /opt/iobroker/iobroker-data/files/homekit-controller.admin/static/js/main.f592ece1.js
9.3M    /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_c4452914ae9ded11bf33d1a5a7669f5d-if00-port0

107*** ZigBee Settings ***
Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


107*** NodeJS-Installation ***

/usr/bin/nodejs     v22.21.1
/usr/bin/node         v22.21.1
/usr/bin/npm         11.6.4
/usr/bin/npx         11.6.4
/usr/bin/corepack     0.34.0

nodejs:
  Installed: 22.21.1-1nodesource1
  Candidate: 22.21.1-1nodesource1
  Version table:
*** 22.21.1-1nodesource1 100
        100 /var/lib/dpkg/status

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

Checking for nodejs vulnerability:


█████  ██      ██           ██████   ██████   ██████  ██████         ██
██   ██ ██      ██          ██       ██    ██ ██    ██ ██   ██     ██  ██
███████ ██      ██          ██   ███ ██    ██ ██    ██ ██   ██         ██
██   ██ ██      ██          ██    ██ ██    ██ ██    ██ ██   ██     ██  ██
██   ██ ███████ ███████      ██████   ██████   ██████  ██████         ██



107*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
raspberrypi         raspberrypi (version: 7.0.7, hostname: raspberrypi   , alive, uptime: 3217)

Core adapters versions
js-controller:     7.0.7
admin:         7.7.19
javascript:     9.0.11

nodejs modules from github:     1
+-- homebridge-tapo@1.4.17 (git+ssh://git@github.com/apatsufas/homebridge-tapo-p100.git#8d25f8ab9ffc1d7cca1118cd0081d1ba28fd3cd1)

Adapter State
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.awtrix-light.0           : awtrix-light          : raspberrypi                              -  enabled
+ system.adapter.backitup.0               : backitup              : raspberrypi                              -  enabled
+ system.adapter.cloud.0                  : cloud                 : raspberrypi                              -  enabled
+ system.adapter.daikin-cloud.0           : daikin-cloud          : raspberrypi                              -  enabled
+ system.adapter.daikin.0                 : daikin                : raspberrypi                              -  enabled
+ system.adapter.daikin.1                 : daikin                : raspberrypi                              -  enabled
+ system.adapter.discovery.0              : discovery             : raspberrypi                              -  enabled
+ system.adapter.ecovacs-deebot.0         : ecovacs-deebot        : raspberrypi                              -  enabled
+ system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: raspberrypi                              -  enabled
+ system.adapter.history.0                : history               : raspberrypi                              -  enabled
+ system.adapter.homeconnect.0            : homeconnect           : raspberrypi                              -  enabled
+ system.adapter.influxdb.0               : influxdb              : raspberrypi                              -  enabled, port: 8086
+ system.adapter.iqontrol.0               : iqontrol              : raspberrypi                              -  enabled
+ system.adapter.javascript.0             : javascript            : raspberrypi                              -  enabled
+ system.adapter.lg-thinq.0               : lg-thinq              : raspberrypi                              -  enabled
+ system.adapter.meross.0                 : meross                : raspberrypi                              -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : raspberrypi                              -  enabled, port: 1885, bind: 0.0.0.0
+ system.adapter.myenergi.0               : myenergi              : raspberrypi                              -  enabled
+ system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.statistics.0             : statistics            : raspberrypi                              -  enabled
+ system.adapter.sun2000.0                : sun2000               : raspberrypi                              -  enabled, port: 502
+ system.adapter.terminal.0               : terminal              : raspberrypi                              -  enabled, port: 8088, bind: 0.0.0.0, run as: admin
+ system.adapter.tesla-motors.0           : tesla-motors          : raspberrypi                              -  enabled
+ system.adapter.tuya.0                   : tuya                  : raspberrypi                              -  enabled
  system.adapter.vis-2.0                  : vis-2                 : raspberrypi                              - disabled
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee2mqtt.0            : zigbee2mqtt           : raspberrypi                              -  enabled

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.influxdb.0               : influxdb              : raspberrypi                              -  enabled, port: 8086
+ system.adapter.mqtt.0                   : mqtt                  : raspberrypi                              -  enabled, port: 1885, bind: 0.0.0.0
+ system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.sun2000.0                : sun2000               : raspberrypi                              -  enabled, port: 502
+ system.adapter.terminal.0               : terminal              : raspberrypi                              -  enabled, port: 8088, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): stable
Upgrade policy: none

Installed ioBroker-Adapters
Used repository: stable
Adapter    "admin"        : 7.7.19   , installed 7.7.19
Adapter    "awtrix-light" : 3.0.0    , installed 3.0.0
Adapter    "backitup"     : 3.3.10   , installed 3.3.10
Adapter    "cloud"        : 5.0.1    , installed 5.0.1
Adapter    "daikin"       : 1.5.1    , installed 1.5.1
Adapter    "daikin-cloud" : 0.4.12   , installed 0.4.12
Adapter    "discovery"    : 5.0.0    , installed 5.0.0
Adapter    "ecovacs-deebot": 1.4.15  , installed 1.4.15
Adapter    "energiefluss-erweitert": 0.8.1, installed 0.8.1
Adapter    "history"      : 3.0.1    , installed 3.0.1
Adapter    "homeconnect"  : 1.4.3    , installed 1.4.3
Adapter    "homekit-controller": 0.5.11, installed 0.5.11
Adapter    "influxdb"     : 4.0.2    , installed 4.0.2
Adapter    "iqontrol"     : 3.0.0    , installed 3.0.0
Adapter    "javascript"   : 9.0.11   , installed 9.0.11
Controller "js-controller": 7.0.7    , installed 7.0.7
Adapter    "lg-thinq"     : 1.1.3    , installed 1.1.3
Adapter    "meross"       : 1.17.0   , installed 1.17.0
Adapter    "modbus"       : 6.3.2    , installed 6.3.2
Adapter    "mqtt"         : 6.1.4    , installed 6.1.4
Adapter    "mqtt-client"  : 3.0.0    , installed 3.0.0
Adapter    "myenergi"     : 0.0.3    , installed 0.0.3
Adapter    "openhab"      : 1.2.0    , installed 1.2.0
Adapter    "shelly"       : 10.4.1   , installed 10.4.1
Adapter    "simple-api"   : 2.8.0    , installed 2.8.0
Adapter    "socketio"     : 6.7.1    , installed 6.7.1
Adapter    "statistics"   : 2.4.0    , installed 2.4.0
Adapter    "sun2000"      : 2.3.5    , installed 2.3.5
Adapter    "terminal"     : 1.0.0    , installed 1.0.0
Adapter    "tesla-motors" : 1.3.2    , installed 1.3.2
Adapter    "tuya"         : 3.16.0   , installed 3.16.0
Adapter    "vis-2"        : 2.13.4   , installed 2.13.8
Adapter    "web"          : 7.0.8    , installed 7.0.8
Adapter    "ws"           : 2.6.2    , installed 2.6.2
Adapter    "zigbee"       : 3.1.5    , installed 3.1.5
Adapter    "zigbee2mqtt"  : 3.0.9    , installed 3.0.9

Objects and States
Please stand by - This may take a while
Objects:     6475
States:     5056

107*** OS-Repositories and Updates ***
Hit:1 http://archive.raspberrypi.org/debian trixie InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian trixie InRelease
Reading package lists...

Pending Updates: 0

107*** Listening Ports ***
sudo: a terminal is required to read the password; either use the -S option to read from standard input or configure an askpass helper
sudo: a password is required

107*** Log File - Last 25 Lines ***

2026-01-02 21:11:14.167  - info: host.raspberrypi iobroker host.raspberrypi object system.adapter.terminal.0.memHeapTotal created
2026-01-02 21:11:14.176  - info: host.raspberrypi iobroker host.raspberrypi object system.adapter.terminal.0.memRss created
2026-01-02 21:11:14.188  - info: host.raspberrypi iobroker host.raspberrypi object system.adapter.terminal.0.uptime created
2026-01-02 21:11:14.197  - info: host.raspberrypi iobroker host.raspberrypi object system.adapter.terminal.0.inputCount created
2026-01-02 21:11:14.208  - info: host.raspberrypi iobroker host.raspberrypi object system.adapter.terminal.0.outputCount created
2026-01-02 21:11:14.216  - info: host.raspberrypi iobroker host.raspberrypi object system.adapter.terminal.0.eventLoopLag created
2026-01-02 21:11:14.225  - info: host.raspberrypi iobroker host.raspberrypi object system.adapter.terminal.0.sigKill created
2026-01-02 21:11:14.236  - info: host.raspberrypi iobroker host.raspberrypi object system.adapter.terminal.0.logLevel created
2026-01-02 21:11:14.250  - info: host.raspberrypi iobroker host.raspberrypi object system.adapter.terminal.upload created
2026-01-02 21:11:14.259  - info: host.raspberrypi iobroker host.raspberrypi object terminal.0.info created
2026-01-02 21:11:14.266  - info: host.raspberrypi iobroker host.raspberrypi object terminal.0.info.connection created
2026-01-02 21:11:14.274  - info: host.raspberrypi iobroker host.raspberrypi Set default value of terminal.0.info.connection: false
2026-01-02 21:11:14.285  - info: host.raspberrypi iobroker host.raspberrypi object system.adapter.terminal.0 created
2026-01-02 21:11:15.320  - info: host.raspberrypi iobroker exit 0
2026-01-02 21:11:17.283  - info: admin.0 (1428) ==> Connected system.user.admin from ::ffff:192.168.2.119
2026-01-02 21:11:18.266  - info: host.raspberrypi instance system.adapter.terminal.0 in version "1.0.0" started with pid 5426
2026-01-02 21:11:19.115  - info: admin.0 (1428) <== Disconnect system.user.admin from ::ffff:192.168.2.119
2026-01-02 21:11:21.606  - info: terminal.0 (5426) starting. Version 1.0.0 in /opt/iobroker/node_modules/iobroker.terminal, node: v22.21.1, js-controller: 7.0.7
2026-01-02 21:11:21.680  - info: terminal.0 (5426) http server listening on port 8088
2026-01-02 21:12:13.033  - info: daikin-cloud.0 (1904) Daikin-Cloud tokens updated ...
2026-01-02 21:12:13.034  - info: daikin-cloud.0 (1904) Daikin token updated in adapter configuration ...
2026-01-02 21:14:44.067  - info: tuya.0 (1658) 73103057e868e767b347: Connect locally to device
2026-01-02 21:14:44.068  - info: tuya.0 (1658) 73103057e868e767b347 Init with IP=192.168.2.128, Key=5xJDx8!3L%N;&}6E, Version=3.3
2026-01-02 21:16:14.359  - info: admin.0 (1428) <== Disconnect system.user.admin from ::ffff:192.168.2.119 admin
2026-01-02 21:16:17.892  - info: admin.0 (1428) <== Disconnect system.user.admin from ::ffff:192.168.2.119 admin

============ Mark until here for C&P =============

iob diag has finished.

/opt/iobroker$ sudo apt update

WARNING: apt does not have a stable CLI interface. Use with caution in scripts.

Hit:1 http://archive.raspberrypi.org/debian trixie InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian trixie InRelease
Reading package lists...

Building dependency tree...

Reading state information...

30 packages can be upgraded. Run 'apt list --upgradable' to see them.
/opt/iobroker$ apt policy openssh-server

WARNING: apt does not have a stable CLI interface. Use with caution in scripts.

openssh-server:
Installed: (none)
Candidate: (none)
Version table:
1:9.2p1-2+deb12u7 -1
100 /var/lib/dpkg/status
/opt/iobroker$
/opt/iobroker$ sudo apt update apt policy openssh-server

WARNING: apt does not have a stable CLI interface. Use with caution in scripts.

E:
The update command takes no arguments
/opt/iobroker$

[Thomas Braun]

@marcelinho sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':

sudo su -

Wer erzählt so einen Unsinn?

[marcelinho]

chat gpt.. ich versuche es gerade eben wieder zum laufen zu bringen und kenne mich nicht so aus.

[Thomas Braun]

@marcelinho sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':

Debian GNU/Linux 12 (bookworm)

Wolltest du nicht Debian 13 installieren?

Ich weiß nicht welche shell in dem Terminal aufgerufen wird. Scheint mir was altes zu sein.

[marcelinho]

doch ja debian 13, ich war bis zu dem Punkt: sudo apt full-upgrade und dann hab ich den reboot gemacht und jetzt kann ich nicht mehr zugreifen.

[Thomas Braun]

@marcelinho

Lass BITTE die Finger von ChatGPT. Das nutzt dir nur was, wenn du den Quark auch einordnen kannst, der dir da verklickert wird.

[Homoran]

@marcelinho sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':

doch ja debian 13, ich war bis zu dem Punkt: sudo apt full-upgrade

upgrade bei raspberryOS?
Das geht doch nicht

[Thomas Braun]

@Homoran sagte in Upgrade von Debian 12 'Bookworm' auf Debian 13 'Trixie':

Das geht doch nicht

Doch, von einem sauberen Raspberry12 kommst du auch auf ein sauberes 13.
Nur von 11 auf 12 geht es bei Raspberry nicht.

[marcelinho]

ich hab hier noch ne micro SD Karte da ich ziehe da neu Debian 13 drauf und würde die Backups einspielen, geht das auch? Ich komme bei der aktuellen Karte zwar nicht mit putty drauf aber könnte mit die Backups neu erstellen (iobroker ist ja erreichbar) und einspielen oder?

[Thomas Braun]

@marcelinho

Haste keine aktuellen Backups vorher gemacht???
Du bist ganz schön blauäugig...

@homoran
Kannst du die letzten Postings bitte separieren? Das hat mit dem Ursprungsthema nicht mehr viel zu tun.

geht das auch?

Natürlich geht das.

[Thomas Braun]

@marcelinho

Irgendwo und irgendwie hast du dir die Paketquellen zersemmelt.
Denn

*** OS-Repositories and Updates ***
Hit:1 http://archive.raspberrypi.org/debian trixie InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian trixie InRelease
Reading package lists...

Pending Updates: 0

passt null zu

openssh-server:
Installed: (none)
Candidate: (none)
Version table:
1:9.2p1-2+deb12u7 -1

Auf einem 'gesunden' Trixie muss da das kommen:

echad@chet:~ $ apt policy openssh-server
openssh-server:
  Installiert:           1:10.0p1-7
  Installationskandidat: 1:10.0p1-7
  Versionstabelle:
 *** 1:10.0p1-7 500
        500 http://deb.debian.org/debian trixie/main arm64 Packages
        100 /var/lib/dpkg/status
echad@chet:~ $ 

Die Basis-Repos sind auch zu dritt:

OK:1 http://deb.debian.org/debian trixie InRelease
Holen:2 http://deb.debian.org/debian-security trixie-security InRelease [43,4 kB]                                                       
Holen:3 http://deb.debian.org/debian trixie-updates InRelease [47,3 kB]

Bei dir ist da aber gar nix mehr. Und deswegen geht da auch kein Upgrade.

Edit: Ich sehe gerade, das fehlte von Anfang an. Hab ich übersehen.

Installier es neu.