Neuer Blogbeitrag: Monatsrückblick - Dezember 2025 🎄

[Thomas Braun]

@Gonzokalle

Was genau wie installiert?
Bitte das richtige Log anschauen, nicht den unvollständigen, chronologischen Kram aus dem Admin.
Findet sich unter

iob logs

[Homoran]

@gonzokalle
@mcm1957 sagte in RPI2 Adapter kann nicht installiert werden:

der RPI 2 V3.x.x. ist für PI-OS TRIXIE

und was hast du?

[Gonzokalle]

@Thomas-Braun

Wenn ich im stable über Adapter rpi2 2.4.0 installiere kommt das:
Jetzt richtig?

$ iobroker add rpi2 auto --host RaspberryPi-Iobroker --debug

NPM version: 10.9.4

Installing iobroker.rpi2@2.4.0... (System call)

npm warn deprecated npmlog@4.1.2: This package is no longer supported.npm warn deprecated rimraf@3.0.2: Rimraf versions prior to v4 are no longer supportednpm warn deprecated are-we-there-yet@1.1.7: This package is no longer supported.npm warn deprecated glob@7.2.3: Glob versions prior to v9 are no longer supported

npm warn deprecated gauge@2.7.4: This package is no longer supported.

> iobroker.rpi2@2.4.0 preinstall> sudo apt-get install -y libgpiod-dev || exit 0

Paketlisten werden gelesen…

Abhängigkeitsbaum wird aufgebaut…

Statusinformationen werden eingelesen…

libgpiod-dev ist schon die neueste Version (2.2.1-2+deb13u1).0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.

> @stoprocent/noble@1.19.1 install> node-gyp-build

gyp info it worked if it ends with ok

gyp info using node-gyp@7.1.2gyp info using node@22.21.0 | linux | arm64

(node:15733) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.(Use `node --trace-deprecation ...` to show where the warning was created)

gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"

gyp ERR! UNCAUGHT EXCEPTION

gyp ERR! System Linux 6.12.47+rpt-rpi-2712gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/node-gyp/bin/node-gyp.js" "rebuild"gyp ERR! cwd /opt/iobroker/node_modules/@stoprocent/noblegyp ERR! node -v v22.21.0gyp ERR! node-gyp -v v7.1.2gyp ERR! Node-gyp failed to build your package.gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.

> authenticate-pam@1.0.5 install> node-gyp rebuild

gyp info it worked if it ends with ok

gyp info using node-gyp@7.1.2gyp info using node@22.21.0 | linux | arm64

(node:15748) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.(Use `node --trace-deprecation ...` to show where the warning was created)

gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"

gyp ERR! UNCAUGHT EXCEPTION gyp ERR! stack TypeError: Cannot assign to read only property 'cflags' of object '#<Object>'gyp ERR! stack at createConfigFile (/opt/iobroker/node_modules/node-gyp/lib/configure.js:117:21)gyp ERR! stack at /opt/iobroker/node_modules/node-gyp/lib/configure.js:84:9gyp ERR! stack at FSReqCallback.oncomplete (node:fs:187:23)gyp ERR! System Linux 6.12.47+rpt-rpi-2712gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild"gyp ERR! cwd /opt/iobroker/node_modules/authenticate-pamgyp ERR! node -v v22.21.0gyp ERR! node-gyp -v v7.1.2gyp ERR! Node-gyp failed to build your package.gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.

> node-dht-sensor@0.4.5 install> node-gyp configure

gyp info it worked if it ends with ok

gyp info using node-gyp@7.1.2gyp info using node@22.21.0 | linux | arm64

(node:15762) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.(Use `node --trace-deprecation ...` to show where the warning was created)

gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"

gyp ERR! UNCAUGHT EXCEPTION

> opengpio@1.0.18 install> node-gyp rebuild

gyp info it worked if it ends with ok

gyp info using node@22.21.0 | linux | arm64

(node:15776) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.(Use `node --trace-deprecation ...` to show where the warning was created)

gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"

gyp ERR! UNCAUGHT EXCEPTION

gyp ERR! stack TypeError: Cannot assign to read only property 'cflags' of object '#<Object>'gyp ERR! stack at createConfigFile (/opt/iobroker/node_modules/node-gyp/lib/configure.js:117:21)

gyp ERR! stack at /opt/iobroker/node_modules/node-gyp/lib/configure.js:84:9gyp ERR! stack at FSReqCallback.oncomplete (node:fs:187:23)gyp ERR! System Linux 6.12.47+rpt-rpi-2712gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild"gyp ERR! cwd /opt/iobroker/node_modules/opengpiogyp ERR! node -v v22.21.0gyp ERR! node-gyp -v v7.1.2gyp ERR! Node-gyp failed to build your package.gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.

npm error code 7

npm error path /opt/iobroker/node_modules/opengpionpm error command failednpm error command sh -c node-gyp rebuild

npm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2025-12-26T15_51_37_460Z-debug-0.log

npm warn deprecated npmlog@4.1.2: This package is no longer supported.npm warn deprecated rimraf@3.0.2: Rimraf versions prior to v4 are no longer supportednpm warn deprecated are-we-there-yet@1.1.7: This package is no longer supported.npm warn deprecated glob@7.2.3: Glob versions prior to v9 are no longer supportednpm warn deprecated gauge@2.7.4: This package is no longer supported.gyp info it worked if it ends with okgyp info using node-gyp@7.1.2gyp info using node@22.21.0 | linux | arm64(node:15733) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.(Use `node --trace-deprecation ...` to show where the warning was created)gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"gyp ERR! UNCAUGHT EXCEPTION gyp ERR! stack TypeError: Cannot assign to read only property 'cflags' of object '#<Object>'gyp ERR! stack at createConfigFile (/opt/iobroker/node_modules/node-gyp/lib/configure.js:117:21)gyp ERR! stack at /opt/iobroker/node_modules/node-gyp/lib/configure.js:84:9gyp ERR! stack at FSReqCallback.oncomplete (node:fs:187:23)gyp ERR! System Linux 6.12.47+rpt-rpi-2712gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/node-gyp/bin/node-gyp.js" "rebuild"gyp ERR! cwd /opt/iobroker/node_modules/@stoprocent/noblegyp ERR! node -v v22.21.0gyp ERR! node-gyp -v v7.1.2gyp ERR! Node-gyp failed to build your package.gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.gyp info it worked if it ends with okgyp info using node-gyp@7.1.2gyp info using node@22.21.0 | linux | arm64(node:15748) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.(Use `node --trace-deprecation ...` to show where the warning was created)gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"gyp ERR! UNCAUGHT EXCEPTION gyp ERR! stack TypeError: Cannot assign to read only property 'cflags' of object '#<Object>'gyp ERR! stack at createConfigFile (/opt/iobroker/node_modules/node-gyp/lib/configure.js:117:21)gyp ERR! stack at /opt/iobroker/node_modules/node-gyp/lib/configure.js:84:9gyp ERR! stack at FSReqCallback.oncomplete (node:fs:187:23)gyp ERR! System Linux 6.12.47+rpt-rpi-2712gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild"gyp ERR! cwd /opt/iobroker/node_modules/authenticate-pamgyp ERR! node -v v22.21.0gyp ERR! node-gyp -v v7.1.2gyp ERR! Node-gyp failed to build your package.gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.gyp info it worked if it ends with okgyp info using node-gyp@7.1.2gyp info using node@22.21.0 | linux | arm64(node:15762) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.(Use `node --trace-deprecation ...` to show where the warning was created)gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"gyp ERR! UNCAUGHT EXCEPTION gyp ERR! stack TypeError: Cannot assign to read only property 'cflags' of object '#<Object>'gyp ERR! stack at createConfigFile (/opt/iobroker/node_modules/node-gyp/lib/configure.js:117:21)gyp ERR! stack at /opt/iobroker/node_modules/node-gyp/lib/configure.js:84:9gyp ERR! stack at FSReqCallback.oncomplete (node:fs:187:23)gyp ERR! System Linux 6.12.47+rpt-rpi-2712gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "configure"gyp ERR! cwd /opt/iobroker/node_modules/node-dht-sensorgyp ERR! node -v v22.21.0gyp ERR! node-gyp -v v7.1.2gyp ERR! Node-gyp failed to build your package.gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.gyp info it worked if it ends with okgyp info using node-gyp@7.1.2gyp info using node@22.21.0 | linux | arm64(node:15776) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.(Use `node --trace-deprecation ...` to show where the warning was created)gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"gyp ERR! UNCAUGHT EXCEPTION gyp ERR! stack TypeError: Cannot assign to read only property 'cflags' of object '#<Object>'gyp ERR! stack at createConfigFile (/opt/iobroker/node_modules/node-gyp/lib/configure.js:117:21)gyp ERR! stack at /opt/iobroker/node_modules/node-gyp/lib/configure.js:84:9gyp ERR! stack at FSReqCallback.oncomplete (node:fs:187:23)gyp ERR! System Linux 6.12.47+rpt-rpi-2712gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild"gyp ERR! cwd /opt/iobroker/node_modules/opengpiogyp ERR! node -v v22.21.0gyp ERR! node-gyp -v v7.1.2gyp ERR! Node-gyp failed to build your package.gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.npm error code 7npm error path /opt/iobroker/node_modules/opengpionpm error command failednpm error command sh -c node-gyp rebuildnpm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2025-12-26T15_51_37_460Z-debug-0.log

host.RaspberryPi-Iobroker Cannot install iobroker.rpi2@2.4.0: 7

ERROR: Process exited with code 25

[Gonzokalle]

@Homoran

Die 2.4.0 wird mir im stable angeboten.

Über von NPM keine Ahnung welche Version.

[Thomas Braun]

@Gonzokalle sagte in RPI2 Adapter kann nicht installiert werden:

Über von NPM keine Ahnung welche Version.

Ist die Version aus dem Latest/Beta-Repository.
Du solltest diese Version installieren:

latest: 3.0.2 for 25 days

[Gonzokalle]

@Thomas-Braun
Ich hatte mich hieran gehalten.

Wie kann ich denn die 3.0.2 installieren?

[Thomas Braun]

@Gonzokalle sagte in RPI2 Adapter kann nicht installiert werden:

Wie kann ich denn die 3.0.2 installieren?

In dem du genau die Version aus deinem obigen Schreenshot ranziehst.

[Gonzokalle]

@Thomas-Braun

Bitte mal etwas genauer über welchen Weg ich die 3.0.2 ranziehe.
Wenn ich es wüsste, hätte ich mir die Frage gerne gespart.

[Thomas Braun]

@Gonzokalle

[Homoran]

@Gonzokalle sagte in RPI2 Adapter kann nicht installiert werden:

@Thomas-Braun

Bitte mal etwas genauer über welchen Weg ich die 3.0.2 ranziehe.
Wenn ich es wüsste, hätte ich mir die Frage gerne gespart.

was ist hier noch inverständlich?

[Gonzokalle]

@Thomas-Braun

So hatte ich es schon gemacht.
Dachte nur, es währe falsch von mir, weil hier auch der Fehler auftritt wie mit der 2.4.0

2025-12-26 17:49:33.255 - info: host.RaspberryPi-Iobroker iobroker url iobroker.rpi2@latest --host RaspberryPi-Iobroker --debug
2025-12-26 17:49:34.066 - info: host.RaspberryPi-Iobroker iobroker install iobroker.rpi2@latest
2025-12-26 17:49:34.180 - info: host.RaspberryPi-Iobroker iobroker NPM version: 10.9.4
2025-12-26 17:49:34.182 - info: host.RaspberryPi-Iobroker iobroker Installing iobroker.rpi2@latest... (System call)
2025-12-26 17:49:36.779 - info: host.RaspberryPi-Iobroker iobroker npm warn deprecated npmlog@4.1.2: This package is no longer supported.npm warn deprecated rimraf@3.0.2: Rimraf versions prior to v4 are no longer supported
2025-12-26 17:49:36.781 - info: host.RaspberryPi-Iobroker iobroker npm warn deprecated are-we-there-yet@1.1.7: This package is no longer supported.
2025-12-26 17:49:36.783 - info: host.RaspberryPi-Iobroker iobroker npm warn deprecated glob@7.2.3: Glob versions prior to v9 are no longer supported
2025-12-26 17:49:36.800 - info: host.RaspberryPi-Iobroker iobroker npm warn deprecated gauge@2.7.4: This package is no longer supported.
2025-12-26 17:49:36.919 - info: host.RaspberryPi-Iobroker iobroker > iobroker.rpi2@3.0.2 preinstall
2025-12-26 17:49:36.920 - info: host.RaspberryPi-Iobroker iobroker > bash ./preinstall-check.sh
2025-12-26 17:49:36.927 - info: host.RaspberryPi-Iobroker iobroker Checking package: libgpiod-dev >= 2.2
2025-12-26 17:49:36.944 - info: host.RaspberryPi-Iobroker iobroker libgpiod-dev version OK: 2.2.1-2+deb13u1
2025-12-26 17:49:36.950 - info: host.RaspberryPi-Iobroker iobroker > @stoprocent/noble@1.19.1 install> node-gyp-build
2025-12-26 17:49:37.094 - info: host.RaspberryPi-Iobroker iobroker gyp info it worked if it ends with ok
2025-12-26 17:49:37.095 - info: host.RaspberryPi-Iobroker iobroker gyp info using node-gyp@7.1.2
2025-12-26 17:49:37.096 - info: host.RaspberryPi-Iobroker iobroker gyp info using node@22.21.0 | linux | arm64
2025-12-26 17:49:37.141 - info: host.RaspberryPi-Iobroker iobroker (node:19334) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.(Use `node --trace-deprecation ...` to show where the warning was created)
2025-12-26 17:49:37.182 - info: host.RaspberryPi-Iobroker iobroker gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"
2025-12-26 17:49:37.358 - info: host.RaspberryPi-Iobroker iobroker gyp ERR! UNCAUGHT EXCEPTION gyp ERR! stack TypeError: Cannot assign to read only property 'cflags' of object '#'gyp ERR! stack at createConfigFile (/opt/iobroker/node_modules/node-gyp/lib/configure.js:117:21)gyp ERR! stack at /opt/iobroker/node_modules/node-gyp/lib/configure.js:84:9gyp ERR! stack at FSReqCallback.oncomplete (node:fs:187:23)gyp ERR! System Linux 6.12.47+rpt-rpi-2712gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/node-gyp/bin/node-gyp.js" "rebuild"gyp ERR! cwd /opt/iobroker/node_modules/@stoprocent/noblegyp ERR! node -v v22.21.0gyp ERR! node-gyp -v v7.1.2gyp ERR! Node-gyp failed to build your package.gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.
2025-12-26 17:49:37.363 - info: host.RaspberryPi-Iobroker iobroker
2025-12-26 17:49:37.364 - info: host.RaspberryPi-Iobroker iobroker > authenticate-pam@1.0.5 install> node-gyp rebuild
2025-12-26 17:49:37.432 - info: host.RaspberryPi-Iobroker iobroker gyp info it worked if it ends with ok
2025-12-26 17:49:37.433 - info: host.RaspberryPi-Iobroker iobroker gyp info using node-gyp@7.1.2gyp info using node@22.21.0 | linux | arm64
2025-12-26 17:49:37.477 - info: host.RaspberryPi-Iobroker iobroker (node:19348) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.(Use `node --trace-deprecation ...` to show where the warning was created)
2025-12-26 17:49:37.561 - info: host.RaspberryPi-Iobroker iobroker gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"
2025-12-26 17:49:37.723 - info: host.RaspberryPi-Iobroker iobroker gyp ERR! UNCAUGHT EXCEPTION
2025-12-26 17:49:37.723 - info: host.RaspberryPi-Iobroker iobroker gyp ERR! stack TypeError: Cannot assign to read only property 'cflags' of object '#'gyp ERR! stack at createConfigFile (/opt/iobroker/node_modules/node-gyp/lib/configure.js:117:21)gyp ERR! stack at /opt/iobroker/node_modules/node-gyp/lib/configure.js:84:9gyp ERR! stack at FSReqCallback.oncomplete (node:fs:187:23)
2025-12-26 17:49:37.724 - info: host.RaspberryPi-Iobroker iobroker gyp ERR! System Linux 6.12.47+rpt-rpi-2712gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild"gyp ERR! cwd /opt/iobroker/node_modules/authenticate-pamgyp ERR! node -v v22.21.0gyp ERR! node-gyp -v v7.1.2gyp ERR! Node-gyp failed to build your package.gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.
2025-12-26 17:49:37.728 - info: host.RaspberryPi-Iobroker iobroker > node-dht-sensor@0.4.5 install
2025-12-26 17:49:37.728 - info: host.RaspberryPi-Iobroker iobroker > node-gyp configure
2025-12-26 17:49:37.790 - info: host.RaspberryPi-Iobroker iobroker gyp info it worked if it ends with ok
2025-12-26 17:49:37.791 - info: host.RaspberryPi-Iobroker iobroker gyp info using node-gyp@7.1.2
2025-12-26 17:49:37.793 - info: host.RaspberryPi-Iobroker iobroker gyp info using node@22.21.0 | linux | arm64
2025-12-26 17:49:37.824 - info: host.RaspberryPi-Iobroker iobroker (node:19363) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.(Use `node --trace-deprecation ...` to show where the warning was created)
2025-12-26 17:49:37.863 - info: host.RaspberryPi-Iobroker iobroker gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"
2025-12-26 17:49:38.035 - info: host.RaspberryPi-Iobroker iobroker gyp ERR! UNCAUGHT EXCEPTION
2025-12-26 17:49:38.035 - info: host.RaspberryPi-Iobroker iobroker gyp ERR! stack TypeError: Cannot assign to read only property 'cflags' of object '#'gyp ERR! stack at createConfigFile (/opt/iobroker/node_modules/node-gyp/lib/configure.js:117:21)gyp ERR! stack at /opt/iobroker/node_modules/node-gyp/lib/configure.js:84:9gyp ERR! stack at FSReqCallback.oncomplete (node:fs:187:23)
2025-12-26 17:49:38.036 - info: host.RaspberryPi-Iobroker iobroker gyp ERR! System Linux 6.12.47+rpt-rpi-2712gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "configure"gyp ERR! cwd /opt/iobroker/node_modules/node-dht-sensorgyp ERR! node -v v22.21.0gyp ERR! node-gyp -v v7.1.2gyp ERR! Node-gyp failed to build your package.gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.
2025-12-26 17:49:38.041 - info: host.RaspberryPi-Iobroker iobroker > opengpio@2.0.2 install
2025-12-26 17:49:38.042 - info: host.RaspberryPi-Iobroker iobroker > node-gyp rebuild
2025-12-26 17:49:38.103 - info: host.RaspberryPi-Iobroker iobroker gyp info it worked if it ends with ok
2025-12-26 17:49:38.104 - info: host.RaspberryPi-Iobroker iobroker gyp info using node-gyp@7.1.2
2025-12-26 17:49:38.104 - info: host.RaspberryPi-Iobroker iobroker gyp info using node@22.21.0 | linux | arm64
2025-12-26 17:49:38.143 - info: host.RaspberryPi-Iobroker iobroker (node:19377) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.(Use `node --trace-deprecation ...` to show where the warning was created)
2025-12-26 17:49:38.183 - info: host.RaspberryPi-Iobroker iobroker gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"
2025-12-26 17:49:38.356 - info: host.RaspberryPi-Iobroker iobroker gyp ERR! UNCAUGHT EXCEPTION gyp ERR! stack TypeError: Cannot assign to read only property 'cflags' of object '#'gyp ERR! stack at createConfigFile (/opt/iobroker/node_modules/node-gyp/lib/configure.js:117:21)
2025-12-26 17:49:38.357 - info: host.RaspberryPi-Iobroker iobroker gyp ERR! stack at /opt/iobroker/node_modules/node-gyp/lib/configure.js:84:9gyp ERR! stack at FSReqCallback.oncomplete (node:fs:187:23)gyp ERR! System Linux 6.12.47+rpt-rpi-2712gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild"gyp ERR! cwd /opt/iobroker/node_modules/opengpiogyp ERR! node -v v22.21.0gyp ERR! node-gyp -v v7.1.2gyp ERR! Node-gyp failed to build your package.gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.
2025-12-26 17:49:38.390 - info: host.RaspberryPi-Iobroker iobroker npm error code 7npm error path /opt/iobroker/node_modules/opengpionpm error command failednpm error command sh -c node-gyp rebuild
2025-12-26 17:49:38.392 - info: host.RaspberryPi-Iobroker iobroker npm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2025-12-26T16_49_34_254Z-debug-0.log
2025-12-26 17:49:38.401 - error: host.RaspberryPi-Iobroker iobroker npm warn deprecated npmlog@4.1.2: This package is no longer supported.npm warn deprecated rimraf@3.0.2: Rimraf versions prior to v4 are no longer supportednpm warn deprecated are-we-there-yet@1.1.7: This package is no longer supported.npm warn deprecated glob@7.2.3: Glob versions prior to v9 are no longer supportednpm warn deprecated gauge@2.7.4: This package is no longer supported.gyp info it worked if it ends with okgyp info using node-gyp@7.1.2gyp info using node@22.21.0 | linux | arm64(node:19334) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.(Use `node --trace-deprecation ...` to show where the warning was created)gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"gyp ERR! UNCAUGHT EXCEPTION gyp ERR! stack TypeError: Cannot assign to read only property 'cflags' of object '#'gyp ERR! stack at createConfigFile (/opt/iobroker/node_modules/node-gyp/lib/configure.js:117:21)gyp ERR! stack at /opt/iobroker/node_modules/node-gyp/lib/configure.js:84:9gyp ERR! stack at FSReqCallback.oncomplete (node:fs:187:23)gyp ERR! System Linux 6.12.47+rpt-rpi-2712gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/node-gyp/bin/node-gyp.js" "rebuild"gyp ERR! cwd /opt/iobroker/node_modules/@stoprocent/noblegyp ERR! node -v v22.21.0gyp ERR! node-gyp -v v7.1.2gyp ERR! Node-gyp failed to build your package.gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.gyp info it worked if it ends with okgyp info using node-gyp@7.1.2gyp info using node@22.21.0 | linux | arm64(node:19348) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.(Use `node --trace-deprecation ...` to show where the warning was created)gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"gyp ERR! UNCAUGHT EXCEPTION gyp ERR! stack TypeError: Cannot assign to read only property 'cflags' of object '#'gyp ERR! stack at createConfigFile (/opt/iobroker/node_modules/node-gyp/lib/configure.js:117:21)gyp ERR! stack at /opt/iobroker/node_modules/node-gyp/lib/configure.js:84:9gyp ERR! stack at FSReqCallback.oncomplete (node:fs:187:23)gyp ERR! System Linux 6.12.47+rpt-rpi-2712gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild"gyp ERR! cwd /opt/iobroker/node_modules/authenticate-pamgyp ERR! node -v v22.21.0gyp ERR! node-gyp -v v7.1.2gyp ERR! Node-gyp failed to build your package.gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.gyp info it worked if it ends with okgyp info using node-gyp@7.1.2gyp info using node@22.21.0 | linux | arm64(node:19363) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.(Use `node --trace-deprecation ...` to show where the warning was created)gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"gyp ERR! UNCAUGHT EXCEPTION gyp ERR! stack TypeError: Cannot assign to read only property 'cflags' of object '#'gyp ERR! stack at createConfigFile (/opt/iobroker/node_modules/node-gyp/lib/configure.js:117:21)gyp ERR! stack at /opt/iobroker/node_modules/node-gyp/lib/configure.js:84:9gyp ERR! stack at FSReqCallback.oncomplete (node:fs:187:23)gyp ERR! System Linux 6.12.47+rpt-rpi-2712gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "configure"gyp ERR! cwd /opt/iobroker/node_modules/node-dht-sensorgyp ERR! node -v v22.21.0gyp ERR! node-gyp -v v7.1.2gyp ERR! Node-gyp failed to build your package.gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.gyp info it worked if it ends with okgyp info using node-gyp@7.1.2gyp info using node@22.21.0 | linux | arm64(node:19377) [DEP0060] DeprecationWarning: The `util._extend` API is deprecated. Please use Object.assign() instead.(Use `node --trace-deprecation ...` to show where the warning was created)gyp info find Python using Python version 3.13.5 found at "/usr/bin/python3"gyp ERR! UNCAUGHT EXCEPTION gyp ERR! stack TypeError: Cannot assign to read only property 'cflags' of object '#'gyp ERR! stack at createConfigFile (/opt/iobroker/node_modules/node-gyp/lib/configure.js:117:21)gyp ERR! stack at /opt/iobroker/node_modules/node-gyp/lib/configure.js:84:9gyp ERR! stack at FSReqCallback.oncomplete (node:fs:187:23)gyp ERR! System Linux 6.12.47+rpt-rpi-2712gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild"gyp ERR! cwd /opt/iobroker/node_modules/opengpiogyp ERR! node -v v22.21.0gyp ERR! node-gyp -v v7.1.2gyp ERR! Node-gyp failed to build your package.gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.npm error code 7npm error path /opt/iobroker/node_modules/opengpionpm error command failednpm error command sh -c node-gyp rebuildnpm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2025-12-26T16_49_34_254Z-debug-0.log
2025-12-26 17:49:38.402 - error: host.RaspberryPi-Iobroker iobroker host.RaspberryPi-Iobroker Cannot install iobroker.rpi2@latest: 7
2025-12-26 17:49:39.415 - info: host.RaspberryPi-Iobroker iobroker exit 25
2025-12-26 17:49:39.603 - info: host.RaspberryPi-Iobroker iobroker upload rpi2 --debug
2025-12-26 17:49:40.414 - error: host.RaspberryPi-Iobroker iobroker No alive host found which has the adapter rpi2 installed! No upload possible. Skipped.
2025-12-26 17:49:41.327 - info: javascript.0 (10154) script.js.FBH_Steuerung: 388
2025-12-26 17:49:41.427 - info: host.RaspberryPi-Iobroker iobroker exit 0

[Gonzokalle]

@Homoran
Hatte dir ja schon geschrieben, dass ich es über NPM versucht habe.

[Thomas Braun]

@Gonzokalle sagte in RPI2 Adapter kann nicht installiert werden:

Die Fehlermeldungen kommen aus einer anderen Ecke.
Was sagt

iob diag

[Gonzokalle]

@Thomas-Braun

========== Start marking the full check here ===========

```bash
Script v.2025-08-09

*** BASE SYSTEM ***
Operating System: Debian GNU/Linux 13 (trixie)
**************************************************************************

Press any key to continue
 Static hostname: RaspberryPi-Iobroker
       Icon name: computer
          Kernel: Linux 6.12.47+rpt-rpi-2712
    Architecture: arm64
OS is similar to:

Model           : Raspberry Pi 5 Model B Rev 1.0
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 64 bit

Systemuptime and Load:
 18:06:55 up  3:48,  3 users,  load average: 0.60, 0.50, 0.51
CPU threads: 4


*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'trixie'!

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** TIME AND TIMEZONES ***
               Local time: Fri 2025-12-26 18:06:55 CET
           Universal time: Fri 2025-12-26 17:06:55 UTC
                 RTC time: Fri 2025-12-26 17:06:55
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
martin
HOME=/home/martin
GROUPS=martin adm dialout cdrom sudo audio video plugdev games users netdev gpio i2c spi render input iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
SUDO_HOME=/home/martin
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

*** DISPLAY-SERVER SETUP ***
Display-Server:         true
Display-Manager:        * lightdm.service - Light Display Manager
Desktop:
Session:                tty

System is booting into 'graphical.target'. Usually a server is running in 'multi-user.target'. Please set BootTarget to 'multi-user.target' or run 'iobroker fix'

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            8.5G        3.9G        1.5G         98M        3.5G        4.6G
Swap:           2.1G          0B        2.1G
Total:           10G        3.9G        3.6G

Active iob-Instances:   30

         8063 M total memory
         3690 M used memory
         3556 M active memory
         2322 M inactive memory
         1387 M free memory
          231 M buffer memory
         3062 M swap cache
         2047 M total swap
            0 M used swap
         2047 M free swap

*** top - Table Of Processes  ***
top - 18:06:56 up  3:48,  3 users,  load average: 0.60, 0.50, 0.51
Tasks: 272 total,   1 running, 271 sleeping,   0 stopped,   0 zombie
%Cpu(s):  9.3 us,  2.3 sy,  0.0 ni, 88.4 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   8063.0 total,   1383.8 free,   3693.1 used,   3295.0 buff/cache
MiB Swap:   2048.0 total,   2048.0 free,      0.0 used.   4369.9 avail Mem

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION

0 loaded units listed.


*** DMESG CRITICAL ERRORS ***
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  3.9G     0  3.9G   0% /dev
tmpfs          tmpfs     1.6G   15M  1.6G   1% /run
/dev/nvme0n1p2 ext4      917G  9.9G  870G   2% /
tmpfs          tmpfs     4.0G  432K  4.0G   1% /dev/shm
tmpfs          tmpfs     5.0M   48K  5.0M   1% /run/lock
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/systemd-journald.service
/dev/nvme0n1p1 vfat      510M   86M  425M  17% /boot/firmware
tmpfs          tmpfs     4.0G  9.5M  4.0G   1% /tmp
tmpfs          tmpfs     807M  256K  807M   1% /run/user/1000
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/getty@tty1.service
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/serial-getty@ttyAMA10.service

Messages concerning ext4 filesystem in dmesg:
[Fri Dec 26 14:18:18 2025] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0  numa=fake=8 system_heap.max_order=0 iommu_dma_numa_policy=interleave smsc95xx.macaddr=2C:CF:67:82:17:A3 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000  console=ttyAMA10,115200 console=tty1 root=PARTUUID=e4c2f3ef-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=DE
[Fri Dec 26 14:18:19 2025] EXT4-fs (nvme0n1p2): orphan cleanup on readonly fs
[Fri Dec 26 14:18:19 2025] EXT4-fs (nvme0n1p2): mounted filesystem d6944274-f2f7-4644-96a4-213c3b367f5c ro with ordered data mode. Quota mode: none.
[Fri Dec 26 14:18:19 2025] EXT4-fs (nvme0n1p2): re-mounted d6944274-f2f7-4644-96a4-213c3b367f5c r/w.

Show mounted filesystems:
TARGET           SOURCE         FSTYPE OPTIONS
/                /dev/nvme0n1p2 ext4   rw,noatime
`-/boot/firmware /dev/nvme0n1p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
2.5G    /var/
221M    /var/lib
216M    /var/cache
203M    /var/cache/apt
154M    /var/lib/apt

Archived and active journals take up 8M in the file system.

/opt/iobroker/backups:
33M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
883M    /opt/iobroker/iobroker-data/
497M    /opt/iobroker/iobroker-data/history
319M    /opt/iobroker/iobroker-data/files
67M     /opt/iobroker/iobroker-data/files/echarts.admin
61M     /opt/iobroker/iobroker-data/files/echarts

The five largest files in iobroker-data are:
58M     /opt/iobroker/iobroker-data/objects.jsonl
26M     /opt/iobroker/iobroker-data/files/echarts/static/js/main.41cee985.js.map
26M     /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.41cee985.js.map
24M     /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.70a15e1f.js.map
18M     /opt/iobroker/iobroker-data/files/echarts/preview/static/js/main.5fe9c7da.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-SHK_JeeLink_LaCrosse-if00-port0
/dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2469419-if00

*** ZigBee Settings ***

HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting:
/dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2469419-if00
Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


*** NodeJS-Installation ***

/usr/bin/nodejs         v22.21.0
/usr/bin/node           v22.21.0
/usr/bin/npm            10.9.4
/usr/bin/npx            10.9.4
/usr/bin/corepack       0.34.0

nodejs:
  Installed: 22.21.0-1nodesource1
  Candidate: 22.21.0-1nodesource1
  Version table:
 *** 22.21.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     22.20.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.4.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     20.19.2+dfsg-1 500
        500 http://deb.debian.org/debian trixie/main arm64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

Checking for nodejs vulnerability:


 █████  ██      ██           ██████   ██████   ██████  ██████         ██
██   ██ ██      ██          ██       ██    ██ ██    ██ ██   ██     ██  ██
███████ ██      ██          ██   ███ ██    ██ ██    ██ ██   ██         ██
██   ██ ██      ██          ██    ██ ██    ██ ██    ██ ██   ██     ██  ██
██   ██ ███████ ███████      ██████   ██████   ██████  ██████         ██



*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
RaspberryPi-Iobroker RaspberryPi-Iobroker (version: 7.0.7, hostname: RaspberryPi-Iobroker, alive, uptime: 12512)

Core adapters versions
js-controller:  7.0.7
admin:          7.7.19
javascript:     9.0.11

nodejs modules from github:     1
+-- iobroker.eusec@2.0.3 (git+ssh://git@github.com/iobroker-community-adapters/ioBroker.eusec.git#f625cbb12aea40dcf6faf11a17d93328f069b753)

Adapter State
+ system.adapter.admin.0                  : admin                 : RaspberryPi-Iobroker                     -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.backitup.0               : backitup              : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.device-watcher.0         : device-watcher        : RaspberryPi-Iobroker                     -  enabled
  system.adapter.devices.0                : devices               : RaspberryPi-Iobroker                     - disabled
+ system.adapter.echarts.0                : echarts               : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.energiefluss.0           : energiefluss          : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.eusec.0                  : eusec                 : RaspberryPi-Iobroker                     -  enabled
  system.adapter.flot.0                   : flot                  : RaspberryPi-Iobroker                     - disabled
+ system.adapter.fullybrowser.0           : fullybrowser          : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.history.0                : history               : RaspberryPi-Iobroker                     -  enabled
  system.adapter.icons-icons8.0           : icons-icons8          : RaspberryPi-Iobroker                     - disabled
+ system.adapter.iot.0                    : iot                   : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.iqontrol.0               : iqontrol              : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.iqontrol.1               : iqontrol              : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.javascript.0             : javascript            : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.jeelink.0                : jeelink               : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : RaspberryPi-Iobroker                     -  enabled, port: 1884, bind: 0.0.0.0
  system.adapter.netatmo-crawler.0        : netatmo-crawler       : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.opendtu.0                : opendtu               : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.opendtu.1                : opendtu               : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.radar2.0                 : radar2                : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.reolink.0                : reolink               : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.reolink.1                : reolink               : RaspberryPi-Iobroker                     -  enabled
  system.adapter.reolink.2                : reolink               : RaspberryPi-Iobroker                     - disabled
+ system.adapter.reolink.3                : reolink               : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.shelly.0                 : shelly                : RaspberryPi-Iobroker                     -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.smartgarden.0            : smartgarden           : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.sonoff.0                 : sonoff                : RaspberryPi-Iobroker                     -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.telegram.0               : telegram              : RaspberryPi-Iobroker                     -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.terminal.0               : terminal              : RaspberryPi-Iobroker                     -  enabled, port: 8088, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : RaspberryPi-Iobroker                     -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.wled.0                   : wled                  : RaspberryPi-Iobroker                     -  enabled
+ system.adapter.zigbee.0                 : zigbee                : RaspberryPi-Iobroker                     -  enabled, port: /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2469419-if00

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : RaspberryPi-Iobroker                     -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.mqtt.0                   : mqtt                  : RaspberryPi-Iobroker                     -  enabled, port: 1884, bind: 0.0.0.0
+ system.adapter.shelly.0                 : shelly                : RaspberryPi-Iobroker                     -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.sonoff.0                 : sonoff                : RaspberryPi-Iobroker                     -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.telegram.0               : telegram              : RaspberryPi-Iobroker                     -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.terminal.0               : terminal              : RaspberryPi-Iobroker                     -  enabled, port: 8088, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : RaspberryPi-Iobroker                     -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : RaspberryPi-Iobroker                     -  enabled, port: /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2469419-if00

ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): stable
Upgrade policy: none

Installed ioBroker-Adapters
Used repository: stable
Adapter    "admin"        : 7.7.19   , installed 7.7.19
Adapter    "alexa2"       : 3.27.4   , installed 3.27.4
Adapter    "backitup"     : 3.3.10   , installed 3.3.10
Adapter    "device-watcher": 2.13.1  , installed 2.13.1
Adapter    "devices"      : 1.2.8    , installed 1.2.8
Adapter    "echarts"      : 1.9.2    , installed 1.9.2
Adapter    "energiefluss" : 3.6.2    , installed 3.6.2
Adapter    "eusec"        : 2.0.3    , installed 2.0.3
Adapter    "flot"         : 1.12.0   , installed 1.12.0
Adapter    "fullybrowser" : 3.1.2    , installed 3.1.2
Adapter    "history"      : 3.0.1    , installed 3.0.1
Adapter    "icons-icons8" : 0.0.1    , installed 0.0.1
Adapter    "iot"          : 5.0.7    , installed 5.0.7
Adapter    "iqontrol"     : 3.0.0    , installed 3.0.0
Adapter    "javascript"   : 9.0.11   , installed 9.0.11
Adapter    "jeelink"      : 1.2.5    , installed 1.2.5
Controller "js-controller": 7.0.7    , installed 7.0.7
Adapter    "mqtt"         : 6.1.4    , installed 6.1.4
Adapter    "netatmo-crawler": 1.1.0  , installed 1.1.0
Adapter    "opendtu"      : 3.1.0    , installed 3.1.0
Adapter    "radar2"       : 2.4.0    , installed 2.4.0
Adapter    "reolink"      : 1.2.3    , installed 1.2.3
Adapter    "shelly"       : 10.4.1   , installed 10.4.1
Adapter    "smartgarden"  : 2.0.1    , installed 2.0.1
Adapter    "socketio"     : 6.7.1    , installed 7.0.8
Adapter    "sonoff"       : 3.2.1    , installed 3.2.1
Adapter    "telegram"     : 4.1.0    , installed 4.1.0
Adapter    "terminal"     : 1.0.0    , installed 1.0.0
Adapter    "web"          : 7.0.8    , installed 7.0.8
Adapter    "wled"         : 0.7.2    , installed 0.7.2
Adapter    "ws"           : 2.6.2    , installed 3.0.19
Adapter    "zigbee"       : 3.1.5    , installed 3.2.5

Objects and States
Please stand by - This may take a while
Objects:        6937
States:         5878

*** OS-Repositories and Updates ***
lease stretch the window of your terminal programm (puTTY) as wide as possible or switch to full screen

The following checks may give hints to potential malconfigurations or errors, please post them in our forum:

https://forum.iobroker.net

Just copy and paste the Summary Page, including the ``` characters at start and end.
It helps us to help you!

**************************************************************************
* Some output is masked. For full results please use 'iob diag --unmask' *
**************************************************************************

Press any key to continue
W: https://deb.nodesource.com/node_22.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details
Hit:1 http://deb.debian.org/debian trixie InRelease
Hit:2 http://deb.debian.org/debian trixie-updates InRelease
Hit:3 http://archive.raspberrypi.com/debian trixie InRelease
Hit:4 http://deb.debian.org/debian-security trixie-security InRelease
Hit:5 https://deb.nodesource.com/node_22.x nodistro InRelease
Reading package lists...
W: https://deb.nodesource.com/node_22.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          5984       1/init
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          11320      981/sshd: /usr/sbin
tcp        0      0 0.0.0.0:1884            0.0.0.0:*               LISTEN      1001       46426      10527/io.mqtt.0
tcp        0      0 0.0.0.0:1882            0.0.0.0:*               LISTEN      1001       47256      10689/io.shelly.0
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       46720      10707/io.sonoff.0
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       35794      7194/iobroker.js-co
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       38181      7194/iobroker.js-co
tcp        0      0 127.0.0.1:631           0.0.0.0:*               LISTEN      0          11273      955/cupsd
tcp6       0      0 :::111                  :::*                    LISTEN      0          2197       1/init
tcp6       0      0 :::22                   :::*                    LISTEN      0          11322      981/sshd: /usr/sbin
tcp6       0      0 :::21                   :::*                    LISTEN      0          137963     14164/vsftpd
tcp6       0      0 :::8554                 :::*                    LISTEN      1001       45422      10444/go2rtc
tcp6       0      0 :::8555                 :::*                    LISTEN      1001       45424      10444/go2rtc
tcp6       0      0 :::1984                 :::*                    LISTEN      1001       45430      10444/go2rtc
tcp6       0      0 :::5900                 :::*                    LISTEN      985        11334      986/wayvnc
tcp6       0      0 :::3000                 :::*                    LISTEN      1001       44932      10450/io.fullybrows
tcp6       0      0 :::8088                 :::*                    LISTEN      1001       47309      10734/io.terminal.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       46779      10749/io.web.0
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       37290      7220/io.admin.0
tcp6       0      0 ::1:631                 :::*                    LISTEN      0          11272      955/cupsd
udp        0      0 0.0.0.0:58196           0.0.0.0:*                           101        888        696/avahi-daemon: r
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           1001       47310      10768/io.wled.0
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           101        886        696/avahi-daemon: r
udp        0      0 0.0.0.0:67              0.0.0.0:*                           1001       48164      10587/io.radar2.0
udp        0      0 0.0.0.0:36940           0.0.0.0:*                           1001       44911      10429/io.eusec.0
udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          2196       1/init
udp6       0      0 :::5353                 :::*                                101        887        696/avahi-daemon: r
udp6       0      0 :::45056                :::*                                101        889        696/avahi-daemon: r
udp6       0      0 :::111                  :::*                                0          461        1/init
udp6       0      0 :::8555                 :::*                                1001       45425      10444/go2rtc

*** Log File - Last 25 Lines ***

2025-12-26 18:04:11.412  - info: javascript.0 (10154) script.js.FBH_Steuerung: 581
2025-12-26 18:04:21.346  - info: javascript.0 (10154) script.js.FBH_Steuerung: 591
2025-12-26 18:04:29.182  - info: javascript.0 (10154) script.js.Cam_Reo_Alle_Trigger: Datei überschrieben: Terrasse.mp4
2025-12-26 18:04:31.291  - info: javascript.0 (10154) script.js.FBH_Steuerung: 584
2025-12-26 18:04:33.183  - info: javascript.0 (10154) script.js.Cam_Reo_Alle_Trigger: Datei überschrieben: Terrasse.jpg
2025-12-26 18:04:41.424  - info: javascript.0 (10154) script.js.FBH_Steuerung: 574
2025-12-26 18:04:51.367  - info: javascript.0 (10154) script.js.FBH_Steuerung: 572
2025-12-26 18:05:01.185  - info: javascript.0 (10154) script.js.Cam_Reo_Alle_Trigger: Datei überschrieben: Terrasse.mp4
2025-12-26 18:05:01.341  - info: javascript.0 (10154) script.js.FBH_Steuerung: 863
2025-12-26 18:05:11.365  - info: javascript.0 (10154) script.js.FBH_Steuerung: 820
2025-12-26 18:05:21.387  - info: javascript.0 (10154) script.js.FBH_Steuerung: 622
2025-12-26 18:05:31.307  - info: javascript.0 (10154) script.js.FBH_Steuerung: 484
2025-12-26 18:05:41.462  - info: javascript.0 (10154) script.js.FBH_Steuerung: 500
2025-12-26 18:05:50.011  - info: host.RaspberryPi-Iobroker instance system.adapter.netatmo-crawler.0 in version "1.1.0" started with pid 21134
2025-12-26 18:05:51.264  - info: javascript.0 (10154) script.js.FBH_Steuerung: 482
2025-12-26 18:05:54.244  - info: host.RaspberryPi-Iobroker instance system.adapter.netatmo-crawler.0 having pid 21134 terminated with code 0 (NO_ERROR)
2025-12-26 18:06:01.344  - info: javascript.0 (10154) script.js.FBH_Steuerung: 453
2025-12-26 18:06:11.384  - info: javascript.0 (10154) script.js.FBH_Steuerung: 446
2025-12-26 18:06:21.322  - info: javascript.0 (10154) script.js.FBH_Steuerung: 437
2025-12-26 18:06:31.313  - info: javascript.0 (10154) script.js.FBH_Steuerung: 441
2025-12-26 18:06:41.436  - info: javascript.0 (10154) script.js.FBH_Steuerung: 442
2025-12-26 18:06:51.339  - info: javascript.0 (10154) script.js.FBH_Steuerung: 438
2025-12-26 18:07:01.364  - info: javascript.0 (10154) script.js.FBH_Steuerung: 441
2025-12-26 18:07:11.454  - info: javascript.0 (10154) script.js.FBH_Steuerung: 450
2025-12-26 18:07:21.287  - info: javascript.0 (10154) script.js.FBH_Steuerung: 457

============ Mark until here for C&P =============

iob diag has finished.

[Thomas Braun]

@Gonzokalle sagte in RPI2 Adapter kann nicht installiert werden:

Display-Server: true

Ausschalten.

Dann schau dir

cd /opt/iobroker && npm ls

an.

[Gonzokalle]

@Thomas-Braun

martin@RaspberryPi-Iobroker:~ $ cd /opt/iobroker && npm ls
iobroker.inst@3.0.0 /opt/iobroker
├── @iobroker-javascript.0/node-wol@npm:node-wol@0.1.1
├── @iobroker-javascript.0/wake_on_lan@npm:wake_on_lan@1.0.0
├── @stoprocent/bluetooth-hci-socket@1.5.2 extraneous
├── @types/w3c-web-usb@1.0.13 extraneous
├── @yarnpkg/lockfile@1.1.0 extraneous
├── chalk@4.1.2 extraneous
├── find-yarn-workspace-root@2.0.0 extraneous
├── has-flag@4.0.0 extraneous
├── iobroker.admin@7.7.19
├── iobroker.alexa2@3.27.4
├── iobroker.backitup@3.3.10
├── iobroker.device-watcher@2.13.1
├── iobroker.devices@1.2.8
├── iobroker.echarts@1.9.2
├── iobroker.energiefluss@3.6.2
├── iobroker.eusec@2.0.3 (git+ssh://git@github.com/iobroker-community-adapters/ioBroker.eusec.git#f625cbb12aea40dcf6faf11a17d93328f069b753)
├── iobroker.flot@1.12.0
├── iobroker.fullybrowser@3.1.2
├── iobroker.history@3.0.1
├── iobroker.icons-icons8@0.0.1
├── iobroker.iot@5.0.7
├── iobroker.iqontrol@3.0.0
├── iobroker.javascript@9.0.11
├── iobroker.jeelink@1.2.5
├── iobroker.js-controller@7.0.7
├── iobroker.mqtt@6.1.4
├── iobroker.netatmo-crawler@1.1.0
├── iobroker.opendtu@3.1.0
├── iobroker.radar2@2.4.0
├── iobroker.reolink@1.2.3
├── iobroker.shelly@10.4.1
├── iobroker.smartgarden@2.0.1
├── iobroker.sonoff@3.2.1
├── iobroker.telegram@4.1.0
├── iobroker.terminal@1.0.0
├── iobroker.web@7.0.8
├── iobroker.wled@0.7.2
├── iobroker.zigbee@3.2.5
├── is-docker@2.2.1 extraneous
├── is-wsl@2.2.0 extraneous
├── json-stable-stringify@1.3.0 extraneous
├── jsonify@0.0.1 extraneous
├── klaw-sync@6.0.0 extraneous
├── node-addon-api@8.5.0 extraneous
├── open@7.4.2 extraneous
├── patch-package@8.0.1 extraneous
├── slash@2.0.0 extraneous
├── supports-color@7.2.0 extraneous
├── tmp@0.2.5 extraneous
├── usb@2.16.0 extraneous
└── yaml@2.8.2 extraneous

[Thomas Braun]

@Gonzokalle

Da geht der Build von (mehreren) Paketen in die Hose.

stoprocent/noble:

gyp ERR! UNCAUGHT EXCEPTION 
gyp ERR! stack TypeError: Cannot assign to read only property 'cflags' of object '#'
gyp ERR! stack at createConfigFile (/opt/iobroker/node_modules/node-gyp/lib/configure.js:117:21)
gyp ERR! stack at /opt/iobroker/node_modules/node-gyp/lib/configure.js:84:9
gyp ERR! stack at FSReqCallback.oncomplete (node:fs:187:23)
gyp ERR! System Linux 6.12.47+rpt-rpi-2712
gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/@stoprocent/noble
gyp ERR! node -v v22.21.0
gyp ERR! node-gyp -v v7.1.2
gyp ERR! Node-gyp failed to build your package.
gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.

Ich meine mich erinnern zu können das es damit unlängst auch bei anderen zu Problemen kam. Finde den Thread aber jetzt nicht.

Nächster Build-Error ist bei node-dht-sensor:

gyp ERR! stack TypeError: Cannot assign to read only property 'cflags' of object '#'
gyp ERR! stack at createConfigFile (/opt/iobroker/node_modules/node-gyp/lib/configure.js:117:21)
gyp ERR! stack at /opt/iobroker/node_modules/node-gyp/lib/configure.js:84:9
gyp ERR! stack at FSReqCallback.oncomplete (node:fs:187:23)

gyp ERR! System Linux 6.12.47+rpt-rpi-2712
gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "configure"
gyp ERR! cwd /opt/iobroker/node_modules/node-dht-sensor
gyp ERR! node -v v22.21.0
gyp ERR! node-gyp -v v7.1.2
gyp ERR! Node-gyp failed to build your package.
gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.

3. Build-Error:

gyp ERR! UNCAUGHT EXCEPTION 
gyp ERR! stack TypeError: Cannot assign to read only property 'cflags' of object '#'
gyp ERR! stack at createConfigFile (/opt/iobroker/node_modules/node-gyp/lib/configure.js:117:21)
gyp ERR! stack at /opt/iobroker/node_modules/node-gyp/lib/configure.js:84:9
gyp ERR! stack at FSReqCallback.oncomplete (node:fs:187:23)
gyp ERR! System Linux 6.12.47+rpt-rpi-2712
gyp ERR! command "/usr/bin/node" "/opt/iobroker/node_modules/.bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/opengpio
gyp ERR! node -v v22.21.0
gyp ERR! node-gyp -v v7.1.2
gyp ERR! Node-gyp failed to build your package.gyp ERR! Try to update npm and/or node-gyp and if it does not help file an issue with the package author.
npm error code 7
npm error path /opt/iobroker/node_modules/opengpio
npm error command failednpm error command sh -c node-gyp rebuild
npm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2025-12-26T16_49_34_254Z-debug-0.log

Musste mal schauen, wo diese Module verwendet werden. Den enstprechenden Adapter dann reinstallieren oder neubauen.

[Homoran]

noble, dht und opengpio klingen verdächtig nach Raspi

[Gonzokalle]

@Thomas-Braun
Erstmal Danke für deine Hilfe.
Bin verwundert, dass so viel nicht passt.
Wie kann das kommen?
Ich habe heute Mittag Trixie neu aufgespielt und danach mit dem Backup alle Adapter neu erstellen lassen.
Bis auf dem PRI2 habe null Probleme im Log.

[Gonzokalle]

@Homoran
Meinst du durch den RPI2 Adapter oder das der Raspi einen weg hat?