Onkyo Instanz für "TX-NR 616" funktioniert nicht mehr
-
Hallo zusammen, wie ein Wunder läuft die Instanz wieder. Ich habe nichts gemacht. Kein Update, keine weiteren Installationen oder so. Seit gestern kann ich den Receiver wieder bedienen.
@homoran, was meinst du mit "Fragebögen gelöscht".
LG von zanabria -
Hallo zusammen, wie ein Wunder läuft die Instanz wieder. Ich habe nichts gemacht. Kein Update, keine weiteren Installationen oder so. Seit gestern kann ich den Receiver wieder bedienen.
@homoran, was meinst du mit "Fragebögen gelöscht".
LG von zanabria@zanabria sagte in Onkyo Instanz für "TX-NR 616" funktioniert nicht mehr:
@homoran, was meinst du mit "Fragebögen gelöscht".
wenn du in der Rubrik "Bugs" einen neuen Thread startest hast du automatisch ein paar Anweisungen und Fragen im Eröffnungspost.
Die Fragen sollst du beantworten und den Anweisungen folgen.Diese Informationen benötigen due Helfenden.
Wenn diese vorformatierten Fragebögen im Eröffnungspost fehlen hat der User diese gelöscht.
Due Ausgabe von
iob diagzu posten war übrigens bei den Anweisungen auch dabei -
Hallo zusammen, bei "iob diag" kommt bei mir erstmal folgende Meldung.
" *** iob diag is starting up, please wait ***
iob diag needs to be updated. Please execute 'iobroker fix' first. "
Wenn ich dann den FIX laufen lasse scheint alle OK.
Es kommt dann "Your installation was fixed successfully
Run iobroker start to start ioBroker again! "Nach dem Start von "iob diag" kommt
*** ioBroker Diagnosis ***Please stretch the window of your terminal programm (puTTY) as wide as possible or switch to full screen
The following checks may give hints to potential malconfigurations or errors, please post them in our forum:
Just copy and paste the Summary Page, including the ``` characters at start and end.
It helps us to help you!
- Some output is masked. For full results please use 'iob diag --unmask' *
Press any key to continue
-
Hallo zusammen, bei "iob diag" kommt bei mir erstmal folgende Meldung.
" *** iob diag is starting up, please wait ***
iob diag needs to be updated. Please execute 'iobroker fix' first. "
Wenn ich dann den FIX laufen lasse scheint alle OK.
Es kommt dann "Your installation was fixed successfully
Run iobroker start to start ioBroker again! "Nach dem Start von "iob diag" kommt
*** ioBroker Diagnosis ***Please stretch the window of your terminal programm (puTTY) as wide as possible or switch to full screen
The following checks may give hints to potential malconfigurations or errors, please post them in our forum:
Just copy and paste the Summary Page, including the ``` characters at start and end.
It helps us to help you!
- Some output is masked. For full results please use 'iob diag --unmask' *
Press any key to continue
@zanabria sagte in Onkyo Instanz für "TX-NR 616" funktioniert nicht mehr:
Press any key to continue
Haste den 'any'-key denn schon gedrückt?
-
Kann eigentlich nicht sein. Danach erfolgt ein
clear
und die Ausgabe erfolgt auf dem frischen Screen.
Was für ein Terminal verwendest du? -
Nach "Press any key to continue" kommt
========== Start marking the full check here ===========
Script v.2025-08-09 *** BASE SYSTEM *** Operating System: Raspbian GNU/Linux 12 (bookworm) Static hostname: raspberrypi Icon name: computer Kernel: Linux 6.1.74-v8+ Architecture: arm64 OS is similar to: debian Model : Raspberry Pi 4 Model B Rev 1.2 Docker : false Virtualization : none Kernel : aarch64 Userland : 32 bit Systemuptime and Load: 19:30:07 up 4 days, 20:51, 2 users, load average: 0.76, 0.51, 0.36 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'bookworm'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Mon 2025-12-15 19:30:08 CET Universal time: Mon 2025-12-15 18:30:08 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker User that is running 'js-controller': js-controller is not running *** DISPLAY-SERVER SETUP *** Display-Server: false Display-Manager: * lightdm.service - Light Display Manager Desktop: Session: tty *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 198M 2.5G 1.2M 1.3G 3.8G Swap: 209M 0B 209M Total: 4.2G 198M 2.7G Active iob-Instances: 1 3793 M total memory 189 M used memory 219 M active memory 858 M inactive memory 2402 M free memory 289 M buffer memory 987 M swap cache 199 M total swap 0 M used swap 199 M free swap *** top - Table Of Processes *** top - 19:30:08 up 4 days, 20:51, 2 users, load average: 0.76, 0.51, 0.36 Tasks: 151 total, 1 running, 150 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 20.0 sy, 0.0 ni, 80.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3793.3 total, 2402.1 free, 190.4 used, 1277.4 buff/cache MiB Swap: 200.0 total, 200.0 free, 0.0 used. 3603.0 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * dnsmasq.service loaded failed failed dnsmasq - A lightweight DHCP and caching DNS server * iobroker.service loaded failed failed ioBroker Server LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 2 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 29G 16G 12G 58% / devtmpfs devtmpfs 1.9G 0 1.9G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 1.1M 758M 1% /run tmpfs tmpfs 5.0M 8.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 253M 52M 201M 21% /boot tmpfs tmpfs 380M 56K 380M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Wed Dec 10 22:38:23 2025] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=/dev/ttyS0 root=PARTUUID=97709164-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait smsc95xx.macaddr=dc:a6:32:98:d1:5d [Wed Dec 10 22:38:23 2025] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Wed Dec 10 22:38:23 2025] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Wed Dec 10 22:38:25 2025] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro Files in neuralgic directories: /var: 3.3G /var/ 1.9G /var/log 1.2G /var/log/lightdm 1003M /var/cache 987M /var/cache/apt Archived and active journals take up 765.8M in the file system. /opt/iobroker/backups: 443M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 412M /opt/iobroker/iobroker-data/ 193M /opt/iobroker/iobroker-data/backup-objects 167M /opt/iobroker/iobroker-data/files 47M /opt/iobroker/iobroker-data/files/admin.admin 46M /opt/iobroker/iobroker-data/files/admin.admin/custom/assets The five largest files in iobroker-data are: 19M /opt/iobroker/iobroker-data/objects.jsonl 14M /opt/iobroker/iobroker-data/objects.json.migrated 14M /opt/iobroker/iobroker-data/objects.json.bak.migrated 4.6M /opt/iobroker/iobroker-data/files/javascript.admin/vs/language/typescript/tsWorker.js 4.6M /opt/iobroker/iobroker-data/backup-objects/2025-12-15_17-59_objects.jsonl.gz USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-EnOcean_GmbH_EnOcean_USB_300_DC_FT411J9V-if00-port0 Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v20.19.1 /usr/bin/node v20.19.1 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.31.0 nodejs: Installed: 20.19.1-1nodesource1 Candidate: 20.19.1-1nodesource1 Version table: *** 20.19.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 20.19.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.18.3-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.18.2-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.18.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.18.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.17.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.16.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.15.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.15.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.14.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.13.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.13.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.12.2-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.12.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.12.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.11.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.11.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.10.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.9.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.8.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.8.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.7.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.6.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.6.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.5.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.5.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.4.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.3.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.3.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.2.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.1.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.0.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 18.20.4+dfsg-1~deb12u1+rpi1 500 500 http://raspbian.raspberrypi.org/raspbian bookworm/main armhf Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: Need to install the following packages: is-my-node-vulnerable@1.6.1 Ok to proceed? (y) y Nach ca. 45min stehe ich immer noch hier und habe dann abgebrochen. -
Nach "Press any key to continue" kommt
========== Start marking the full check here ===========
Script v.2025-08-09 *** BASE SYSTEM *** Operating System: Raspbian GNU/Linux 12 (bookworm) Static hostname: raspberrypi Icon name: computer Kernel: Linux 6.1.74-v8+ Architecture: arm64 OS is similar to: debian Model : Raspberry Pi 4 Model B Rev 1.2 Docker : false Virtualization : none Kernel : aarch64 Userland : 32 bit Systemuptime and Load: 19:30:07 up 4 days, 20:51, 2 users, load average: 0.76, 0.51, 0.36 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'bookworm'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Mon 2025-12-15 19:30:08 CET Universal time: Mon 2025-12-15 18:30:08 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker User that is running 'js-controller': js-controller is not running *** DISPLAY-SERVER SETUP *** Display-Server: false Display-Manager: * lightdm.service - Light Display Manager Desktop: Session: tty *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 198M 2.5G 1.2M 1.3G 3.8G Swap: 209M 0B 209M Total: 4.2G 198M 2.7G Active iob-Instances: 1 3793 M total memory 189 M used memory 219 M active memory 858 M inactive memory 2402 M free memory 289 M buffer memory 987 M swap cache 199 M total swap 0 M used swap 199 M free swap *** top - Table Of Processes *** top - 19:30:08 up 4 days, 20:51, 2 users, load average: 0.76, 0.51, 0.36 Tasks: 151 total, 1 running, 150 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 20.0 sy, 0.0 ni, 80.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3793.3 total, 2402.1 free, 190.4 used, 1277.4 buff/cache MiB Swap: 200.0 total, 200.0 free, 0.0 used. 3603.0 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * dnsmasq.service loaded failed failed dnsmasq - A lightweight DHCP and caching DNS server * iobroker.service loaded failed failed ioBroker Server LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 2 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 29G 16G 12G 58% / devtmpfs devtmpfs 1.9G 0 1.9G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 1.1M 758M 1% /run tmpfs tmpfs 5.0M 8.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 253M 52M 201M 21% /boot tmpfs tmpfs 380M 56K 380M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Wed Dec 10 22:38:23 2025] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=/dev/ttyS0 root=PARTUUID=97709164-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait smsc95xx.macaddr=dc:a6:32:98:d1:5d [Wed Dec 10 22:38:23 2025] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Wed Dec 10 22:38:23 2025] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Wed Dec 10 22:38:25 2025] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro Files in neuralgic directories: /var: 3.3G /var/ 1.9G /var/log 1.2G /var/log/lightdm 1003M /var/cache 987M /var/cache/apt Archived and active journals take up 765.8M in the file system. /opt/iobroker/backups: 443M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 412M /opt/iobroker/iobroker-data/ 193M /opt/iobroker/iobroker-data/backup-objects 167M /opt/iobroker/iobroker-data/files 47M /opt/iobroker/iobroker-data/files/admin.admin 46M /opt/iobroker/iobroker-data/files/admin.admin/custom/assets The five largest files in iobroker-data are: 19M /opt/iobroker/iobroker-data/objects.jsonl 14M /opt/iobroker/iobroker-data/objects.json.migrated 14M /opt/iobroker/iobroker-data/objects.json.bak.migrated 4.6M /opt/iobroker/iobroker-data/files/javascript.admin/vs/language/typescript/tsWorker.js 4.6M /opt/iobroker/iobroker-data/backup-objects/2025-12-15_17-59_objects.jsonl.gz USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-EnOcean_GmbH_EnOcean_USB_300_DC_FT411J9V-if00-port0 Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v20.19.1 /usr/bin/node v20.19.1 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.31.0 nodejs: Installed: 20.19.1-1nodesource1 Candidate: 20.19.1-1nodesource1 Version table: *** 20.19.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 20.19.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.18.3-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.18.2-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.18.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.18.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.17.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.16.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.15.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.15.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.14.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.13.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.13.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.12.2-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.12.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.12.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.11.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.11.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.10.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.9.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.8.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.8.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.7.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.6.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.6.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.5.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.5.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.4.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.3.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.3.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.2.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.1.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.0.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 18.20.4+dfsg-1~deb12u1+rpi1 500 500 http://raspbian.raspberrypi.org/raspbian bookworm/main armhf Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: Need to install the following packages: is-my-node-vulnerable@1.6.1 Ok to proceed? (y) y Nach ca. 45min stehe ich immer noch hier und habe dann abgebrochen.@zanabria sagte in Onkyo Instanz für "TX-NR 616" funktioniert nicht mehr:
Userland : 32 bit
Installier das bei nächster Gelegenheit komplett neu.
Dann halt in der aktuellen Version 13 'Trixie'. (Lite, 64Bit, ohne Desktop).js-controller is not running
Dann kann auch der Onkyo-Adapter nicht laufen.
Update die Kiste erstmal ordentlich:
iob stop sudo apt update && sudo apt full-upgrade sudo reboot -
Ja, 64 bit Version werde ich in im Januar neu aufziehen.
Habe im Moment leider keine Zeit dazu.
Danke für die Infos und Anregungen.PS: Onkyo-Adapter, der läuft im Moment. Seltsam, seltsam...
Bis in 2026. Macht's gut
Wie sieht denn nun ein vollständiger Lauf aus?
-
IOB-Diag - Fensterinfos!
*** iob diag is starting up, please wait ***
iob diag needs to be updated. Please execute 'iobroker fix' first.*** ioBroker Diagnosis ***
Please stretch the window of your terminal programm (puTTY) as wide as possible or switch to full screen
The following checks may give hints to potential malconfigurations or errors, please post them in our forum:
Just copy and paste the Summary Page, including the ``` characters at start and end.
It helps us to help you!
- Some output is masked. For full results please use 'iob diag --unmask' *
Press any key to continue
pi@raspberrypi:~ $
pi@raspberrypi:~ $ iob diag --unmask
Dann kommt>>>
*** iob diag is starting up, please wait ***
iob diag needs to be updated. Please execute 'iobroker fix' first.Dann wieder*** ioBroker Diagnosis ***
Please stretch the window of your terminal programm (puTTY) as wide as possible or switch to full screen
The following checks may give hints to potential malconfigurations or errors, please post them in our forum:
Just copy and paste the Summary Page, including the ``` characters at start and end.
It helps us to help you!Press any key to continue
Dann>>>
========== Start marking the full check here ===========
Script v.2025-08-09 *** BASE SYSTEM *** Operating System: Raspbian GNU/Linux 12 (bookworm) Static hostname: raspberrypi Icon name: computer Kernel: Linux 6.1.74-v8+ Architecture: arm64 OS is similar to: debian Model : Raspberry Pi 4 Model B Rev 1.2 Docker : false Virtualization : none Kernel : aarch64 Userland : 32 bit Systemuptime and Load: 08:32:36 up 8 days, 9:54, 2 users, load average: 0.09, 0.17, 0.26 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'bookworm'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Fri 2025-12-19 08:32:36 CET Universal time: Fri 2025-12-19 07:32:36 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker User that is running 'js-controller': js-controller is not running *** DISPLAY-SERVER SETUP *** Display-Server: false Display-Manager: * lightdm.service - Light Display Manager Desktop: Session: tty *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 198M 2.5G 1.2M 1.4G 3.8G Swap: 209M 0B 209M Total: 4.2G 198M 2.7G Active iob-Instances: 1 3793 M total memory 188 M used memory 217 M active memory 877 M inactive memory 2382 M free memory 289 M buffer memory 1009 M swap cache 199 M total swap 0 M used swap 199 M free swap *** top - Table Of Processes *** top - 08:32:36 up 8 days, 9:54, 2 users, load average: 0.09, 0.17, 0.26 Tasks: 144 total, 1 running, 143 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 0.0 sy, 0.0 ni,100.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3793.3 total, 2382.1 free, 188.9 used, 1298.9 buff/cache MiB Swap: 200.0 total, 200.0 free, 0.0 used. 3604.4 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * dnsmasq.service loaded failed failed dnsmasq - A lightweight DHCP and caching DNS server * iobroker.service loaded failed failed ioBroker Server LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 2 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 29G 16G 12G 58% / devtmpfs devtmpfs 1.9G 0 1.9G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 1.1M 758M 1% /run tmpfs tmpfs 5.0M 8.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 253M 52M 201M 21% /boot tmpfs tmpfs 380M 56K 380M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Wed Dec 10 22:38:23 2025] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=/dev/ttyS0 root=PARTUUID=97709164-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait smsc95xx.macaddr=dc:a6:32:98:d1:5d [Wed Dec 10 22:38:23 2025] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Wed Dec 10 22:38:23 2025] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Wed Dec 10 22:38:25 2025] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro Files in neuralgic directories: /var: 3.3G /var/ 1.9G /var/log 1.2G /var/log/lightdm 1003M /var/cache 987M /var/cache/apt Archived and active journals take up 765.8M in the file system. /opt/iobroker/backups: 443M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 425M /opt/iobroker/iobroker-data/ 193M /opt/iobroker/iobroker-data/backup-objects 167M /opt/iobroker/iobroker-data/files 47M /opt/iobroker/iobroker-data/files/admin.admin 46M /opt/iobroker/iobroker-data/files/admin.admin/custom/assets The five largest files in iobroker-data are: 29M /opt/iobroker/iobroker-data/objects.jsonl 14M /opt/iobroker/iobroker-data/objects.json.migrated 14M /opt/iobroker/iobroker-data/objects.json.bak.migrated 4.6M /opt/iobroker/iobroker-data/files/javascript.admin/vs/language/typescript/tsWorker.js 4.6M /opt/iobroker/iobroker-data/backup-objects/2025-12-19_06-40_objects.jsonl.gz USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-EnOcean_GmbH_EnOcean_USB_300_DC_FT411J9V-if00-port0 Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.* Extended Pan ID: grep: /opt/iobroker/iobroker-data/zigbee_*/nvbackup.json: No such file or directory Pan ID: grep: /opt/iobroker/iobroker-data/zigbee_*/nvbackup.json: No such file or directory /home/iobroker/.diag.sh: line 713: printf: 0x: invalid hex number 0 Channel: grep: /opt/iobroker/iobroker-data/zigbee_*/nvbackup.json: No such file or directory Network Key: grep: /opt/iobroker/iobroker-data/zigbee_*/nvbackup.json: No such file or directory *** NodeJS-Installation *** /usr/bin/nodejs v20.19.1 /usr/bin/node v20.19.1 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.31.0 nodejs: Installed: 20.19.1-1nodesource1 Candidate: 20.19.1-1nodesource1 Version table: *** 20.19.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 20.19.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.18.3-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.18.2-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.18.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.18.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.17.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.16.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.15.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.15.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.14.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.13.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.13.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.12.2-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.12.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.12.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.11.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.11.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.10.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.9.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.8.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.8.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.7.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.6.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.6.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.5.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.5.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.4.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.3.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.3.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.2.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.1.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.0.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 18.20.4+dfsg-1~deb12u1+rpi1 500 500 http://raspbian.raspberrypi.org/raspbian bookworm/main armhf Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: Need to install the following packages: is-my-node-vulnerable@1.6.1 Ok to proceed? (y) Nach Y und Enter und 2 Stunden Wartezeit habe ich PuTTY geschlossen. -
IOB-Diag - Fensterinfos!
*** iob diag is starting up, please wait ***
iob diag needs to be updated. Please execute 'iobroker fix' first.*** ioBroker Diagnosis ***
Please stretch the window of your terminal programm (puTTY) as wide as possible or switch to full screen
The following checks may give hints to potential malconfigurations or errors, please post them in our forum:
Just copy and paste the Summary Page, including the ``` characters at start and end.
It helps us to help you!
- Some output is masked. For full results please use 'iob diag --unmask' *
Press any key to continue
pi@raspberrypi:~ $
pi@raspberrypi:~ $ iob diag --unmask
Dann kommt>>>
*** iob diag is starting up, please wait ***
iob diag needs to be updated. Please execute 'iobroker fix' first.Dann wieder*** ioBroker Diagnosis ***
Please stretch the window of your terminal programm (puTTY) as wide as possible or switch to full screen
The following checks may give hints to potential malconfigurations or errors, please post them in our forum:
Just copy and paste the Summary Page, including the ``` characters at start and end.
It helps us to help you!Press any key to continue
Dann>>>
========== Start marking the full check here ===========
Script v.2025-08-09 *** BASE SYSTEM *** Operating System: Raspbian GNU/Linux 12 (bookworm) Static hostname: raspberrypi Icon name: computer Kernel: Linux 6.1.74-v8+ Architecture: arm64 OS is similar to: debian Model : Raspberry Pi 4 Model B Rev 1.2 Docker : false Virtualization : none Kernel : aarch64 Userland : 32 bit Systemuptime and Load: 08:32:36 up 8 days, 9:54, 2 users, load average: 0.09, 0.17, 0.26 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'bookworm'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Fri 2025-12-19 08:32:36 CET Universal time: Fri 2025-12-19 07:32:36 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker User that is running 'js-controller': js-controller is not running *** DISPLAY-SERVER SETUP *** Display-Server: false Display-Manager: * lightdm.service - Light Display Manager Desktop: Session: tty *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 198M 2.5G 1.2M 1.4G 3.8G Swap: 209M 0B 209M Total: 4.2G 198M 2.7G Active iob-Instances: 1 3793 M total memory 188 M used memory 217 M active memory 877 M inactive memory 2382 M free memory 289 M buffer memory 1009 M swap cache 199 M total swap 0 M used swap 199 M free swap *** top - Table Of Processes *** top - 08:32:36 up 8 days, 9:54, 2 users, load average: 0.09, 0.17, 0.26 Tasks: 144 total, 1 running, 143 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 0.0 sy, 0.0 ni,100.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3793.3 total, 2382.1 free, 188.9 used, 1298.9 buff/cache MiB Swap: 200.0 total, 200.0 free, 0.0 used. 3604.4 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * dnsmasq.service loaded failed failed dnsmasq - A lightweight DHCP and caching DNS server * iobroker.service loaded failed failed ioBroker Server LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 2 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 29G 16G 12G 58% / devtmpfs devtmpfs 1.9G 0 1.9G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 1.1M 758M 1% /run tmpfs tmpfs 5.0M 8.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 253M 52M 201M 21% /boot tmpfs tmpfs 380M 56K 380M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Wed Dec 10 22:38:23 2025] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=/dev/ttyS0 root=PARTUUID=97709164-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait smsc95xx.macaddr=dc:a6:32:98:d1:5d [Wed Dec 10 22:38:23 2025] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Wed Dec 10 22:38:23 2025] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Wed Dec 10 22:38:25 2025] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro Files in neuralgic directories: /var: 3.3G /var/ 1.9G /var/log 1.2G /var/log/lightdm 1003M /var/cache 987M /var/cache/apt Archived and active journals take up 765.8M in the file system. /opt/iobroker/backups: 443M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 425M /opt/iobroker/iobroker-data/ 193M /opt/iobroker/iobroker-data/backup-objects 167M /opt/iobroker/iobroker-data/files 47M /opt/iobroker/iobroker-data/files/admin.admin 46M /opt/iobroker/iobroker-data/files/admin.admin/custom/assets The five largest files in iobroker-data are: 29M /opt/iobroker/iobroker-data/objects.jsonl 14M /opt/iobroker/iobroker-data/objects.json.migrated 14M /opt/iobroker/iobroker-data/objects.json.bak.migrated 4.6M /opt/iobroker/iobroker-data/files/javascript.admin/vs/language/typescript/tsWorker.js 4.6M /opt/iobroker/iobroker-data/backup-objects/2025-12-19_06-40_objects.jsonl.gz USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-EnOcean_GmbH_EnOcean_USB_300_DC_FT411J9V-if00-port0 Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.* Extended Pan ID: grep: /opt/iobroker/iobroker-data/zigbee_*/nvbackup.json: No such file or directory Pan ID: grep: /opt/iobroker/iobroker-data/zigbee_*/nvbackup.json: No such file or directory /home/iobroker/.diag.sh: line 713: printf: 0x: invalid hex number 0 Channel: grep: /opt/iobroker/iobroker-data/zigbee_*/nvbackup.json: No such file or directory Network Key: grep: /opt/iobroker/iobroker-data/zigbee_*/nvbackup.json: No such file or directory *** NodeJS-Installation *** /usr/bin/nodejs v20.19.1 /usr/bin/node v20.19.1 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.31.0 nodejs: Installed: 20.19.1-1nodesource1 Candidate: 20.19.1-1nodesource1 Version table: *** 20.19.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 20.19.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.18.3-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.18.2-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.18.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.18.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.17.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.16.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.15.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.15.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.14.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.13.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.13.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.12.2-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.12.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.12.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.11.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.11.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.10.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.9.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.8.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.8.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.7.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.6.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.6.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.5.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.5.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.4.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.3.1-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.3.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.2.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.1.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 20.0.0-1nodesource1 600 500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages 18.20.4+dfsg-1~deb12u1+rpi1 500 500 http://raspbian.raspberrypi.org/raspbian bookworm/main armhf Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: Need to install the following packages: is-my-node-vulnerable@1.6.1 Ok to proceed? (y) Nach Y und Enter und 2 Stunden Wartezeit habe ich PuTTY geschlossen.@zanabria sagte in Onkyo Instanz für "TX-NR 616" funktioniert nicht mehr:
Userland : 32 bit
Installier da NEU das aktuelle Release RaspberryOS 13 'Trixie'.
In der 64Bit-Lite-Version, ohne Desktop.Die Kiste dann künftig regelmäßiger bzw. überhaupt mal aktuell halten.
Support us
396
Online32.7k
Benutzer82.5k
Themen1.3m
Beiträge