Monatsrückblick Januar/Februar 2026 ist online!

[Thomas Braun]

@zanabria

Das riecht nach Update-Stau auf dem System.

[zanabria]

Hallo zusammen, wie ein Wunder läuft die Instanz wieder. Ich habe nichts gemacht. Kein Update, keine weiteren Installationen oder so. Seit gestern kann ich den Receiver wieder bedienen.
@homoran, was meinst du mit "Fragebögen gelöscht".
LG von zanabria

[Thomas Braun]

@zanabria

Zeig mal die Ausgabe von

iob diag

[Homoran]

@zanabria sagte in Onkyo Instanz für "TX-NR 616" funktioniert nicht mehr:

@homoran, was meinst du mit "Fragebögen gelöscht".

wenn du in der Rubrik "Bugs" einen neuen Thread startest hast du automatisch ein paar Anweisungen und Fragen im Eröffnungspost.
Die Fragen sollst du beantworten und den Anweisungen folgen.

Diese Informationen benötigen due Helfenden.

Wenn diese vorformatierten Fragebögen im Eröffnungspost fehlen hat der User diese gelöscht.

Due Ausgabe von iob diag zu posten war übrigens bei den Anweisungen auch dabei

[zanabria]

Hallo zusammen, bei "iob diag" kommt bei mir erstmal folgende Meldung.
" *** iob diag is starting up, please wait ***
iob diag needs to be updated. Please execute 'iobroker fix' first. "
Wenn ich dann den FIX laufen lasse scheint alle OK.
Es kommt dann "Your installation was fixed successfully
Run iobroker start to start ioBroker again! "

Nach dem Start von "iob diag" kommt
*** ioBroker Diagnosis ***

Please stretch the window of your terminal programm (puTTY) as wide as possible or switch to full screen

The following checks may give hints to potential malconfigurations or errors, please post them in our forum:

https://forum.iobroker.net

Just copy and paste the Summary Page, including the ``` characters at start and end.
It helps us to help you!

---

• Some output is masked. For full results please use 'iob diag --unmask' *

---

Press any key to continue

[Thomas Braun]

@zanabria sagte in Onkyo Instanz für "TX-NR 616" funktioniert nicht mehr:

Press any key to continue

Haste den 'any'-key denn schon gedrückt?

[zanabria]

ja, dann ist er wieder im pi-Verzeichnis

[Thomas Braun]

@zanabria

Kann eigentlich nicht sein. Danach erfolgt ein
clear
und die Ausgabe erfolgt auf dem frischen Screen.
Was für ein Terminal verwendest du?

[zanabria]

sorry, das pi-Verzeichnis war nach dem "Fix".
habe es gleich nochmal angestartet und melde mich dann mit den Daten

[zanabria]

Nach "Press any key to continue" kommt

========== Start marking the full check here ===========

Script v.2025-08-09

*** BASE SYSTEM ***
Operating System: Raspbian GNU/Linux 12 (bookworm)
 Static hostname: raspberrypi
       Icon name: computer
          Kernel: Linux 6.1.74-v8+
    Architecture: arm64
OS is similar to: debian

Model           : Raspberry Pi 4 Model B Rev 1.2
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 32 bit

Systemuptime and Load:
 19:30:07 up 4 days, 20:51,  2 users,  load average: 0.76, 0.51, 0.36
CPU threads: 4


*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'bookworm'!

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** TIME AND TIMEZONES ***
               Local time: Mon 2025-12-15 19:30:08 CET
           Universal time: Mon 2025-12-15 18:30:08 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
pi
HOME=/home/pi
GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker

User that is running 'js-controller':
js-controller is not running

*** DISPLAY-SERVER SETUP ***
Display-Server:         false
Display-Manager:        * lightdm.service - Light Display Manager
Desktop:
Session:                tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            4.0G        198M        2.5G        1.2M        1.3G        3.8G
Swap:           209M          0B        209M
Total:          4.2G        198M        2.7G

Active iob-Instances:   1

         3793 M total memory
          189 M used memory
          219 M active memory
          858 M inactive memory
         2402 M free memory
          289 M buffer memory
          987 M swap cache
          199 M total swap
            0 M used swap
          199 M free swap

*** top - Table Of Processes  ***
top - 19:30:08 up 4 days, 20:51,  2 users,  load average: 0.76, 0.51, 0.36
Tasks: 151 total,   1 running, 150 sleeping,   0 stopped,   0 zombie
%Cpu(s):  0.0 us, 20.0 sy,  0.0 ni, 80.0 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   3793.3 total,   2402.1 free,    190.4 used,   1277.4 buff/cache
MiB Swap:    200.0 total,    200.0 free,      0.0 used.   3603.0 avail Mem

*** FAILED SERVICES ***

  UNIT             LOAD   ACTIVE SUB    DESCRIPTION
* dnsmasq.service  loaded failed failed dnsmasq - A lightweight DHCP and caching DNS server
* iobroker.service loaded failed failed ioBroker Server

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.
2 loaded units listed.


*** DMESG CRITICAL ERRORS ***
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       29G   16G   12G  58% /
devtmpfs       devtmpfs  1.9G     0  1.9G   0% /dev
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     759M  1.1M  758M   1% /run
tmpfs          tmpfs     5.0M  8.0K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      253M   52M  201M  21% /boot
tmpfs          tmpfs     380M   56K  380M   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Wed Dec 10 22:38:23 2025] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=/dev/ttyS0 root=PARTUUID=97709164-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait smsc95xx.macaddr=dc:a6:32:98:d1:5d
[Wed Dec 10 22:38:23 2025] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[Wed Dec 10 22:38:23 2025] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Wed Dec 10 22:38:25 2025] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

Show mounted filesystems:
TARGET  SOURCE         FSTYPE OPTIONS
/       /dev/mmcblk0p2 ext4   rw,noatime
`-/boot /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro

Files in neuralgic directories:

/var:
3.3G    /var/
1.9G    /var/log
1.2G    /var/log/lightdm
1003M   /var/cache
987M    /var/cache/apt

Archived and active journals take up 765.8M in the file system.

/opt/iobroker/backups:
443M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
412M    /opt/iobroker/iobroker-data/
193M    /opt/iobroker/iobroker-data/backup-objects
167M    /opt/iobroker/iobroker-data/files
47M     /opt/iobroker/iobroker-data/files/admin.admin
46M     /opt/iobroker/iobroker-data/files/admin.admin/custom/assets

The five largest files in iobroker-data are:
19M     /opt/iobroker/iobroker-data/objects.jsonl
14M     /opt/iobroker/iobroker-data/objects.json.migrated
14M     /opt/iobroker/iobroker-data/objects.json.bak.migrated
4.6M    /opt/iobroker/iobroker-data/files/javascript.admin/vs/language/typescript/tsWorker.js
4.6M    /opt/iobroker/iobroker-data/backup-objects/2025-12-15_17-59_objects.jsonl.gz

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-EnOcean_GmbH_EnOcean_USB_300_DC_FT411J9V-if00-port0

Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


*** NodeJS-Installation ***

/usr/bin/nodejs         v20.19.1
/usr/bin/node           v20.19.1
/usr/bin/npm            10.8.2
/usr/bin/npx            10.8.2
/usr/bin/corepack       0.31.0

nodejs:
  Installed: 20.19.1-1nodesource1
  Candidate: 20.19.1-1nodesource1
  Version table:
 *** 20.19.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
        100 /var/lib/dpkg/status
     20.19.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.18.3-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.18.2-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.18.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.18.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.17.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.16.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.15.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.15.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.14.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.13.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.13.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.12.2-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.12.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.12.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.11.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.11.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.10.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.9.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.8.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.8.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.7.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.6.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.6.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.5.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.5.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.4.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.3.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.3.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.2.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.1.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.0.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     18.20.4+dfsg-1~deb12u1+rpi1 500
        500 http://raspbian.raspberrypi.org/raspbian bookworm/main armhf Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

Checking for nodejs vulnerability:
Need to install the following packages:
is-my-node-vulnerable@1.6.1
Ok to proceed? (y) y

Nach ca. 45min stehe ich immer noch hier und habe dann abgebrochen.

[Thomas Braun]

@zanabria sagte in Onkyo Instanz für "TX-NR 616" funktioniert nicht mehr:

Userland : 32 bit

Installier das bei nächster Gelegenheit komplett neu.
Dann halt in der aktuellen Version 13 'Trixie'. (Lite, 64Bit, ohne Desktop).

js-controller is not running

Dann kann auch der Onkyo-Adapter nicht laufen.

Update die Kiste erstmal ordentlich:

iob stop
sudo apt update && sudo apt full-upgrade
sudo reboot

[zanabria]

Ja, 64 bit Version werde ich in im Januar neu aufziehen.
Habe im Moment leider keine Zeit dazu.
Danke für die Infos und Anregungen.

PS: Onkyo-Adapter, der läuft im Moment. Seltsam, seltsam...

Bis in 2026. Macht's gut

[Thomas Braun]

@zanabria

Wie sieht denn nun ein vollständiger Lauf aus?

[zanabria]

IOB-Diag - Fensterinfos!

*** iob diag is starting up, please wait ***
iob diag needs to be updated. Please execute 'iobroker fix' first.

*** ioBroker Diagnosis ***

Please stretch the window of your terminal programm (puTTY) as wide as possible or switch to full screen

The following checks may give hints to potential malconfigurations or errors, please post them in our forum:

https://forum.iobroker.net

Just copy and paste the Summary Page, including the ``` characters at start and end.
It helps us to help you!

---

• Some output is masked. For full results please use 'iob diag --unmask' *

---

Press any key to continue

pi@raspberrypi:~ $

pi@raspberrypi:~ $ iob diag --unmask

Dann kommt>>>

*** iob diag is starting up, please wait ***
iob diag needs to be updated. Please execute 'iobroker fix' first.

Dann wieder*** ioBroker Diagnosis ***

Please stretch the window of your terminal programm (puTTY) as wide as possible or switch to full screen

The following checks may give hints to potential malconfigurations or errors, please post them in our forum:

https://forum.iobroker.net

Just copy and paste the Summary Page, including the ``` characters at start and end.
It helps us to help you!

Press any key to continue

Dann>>>

========== Start marking the full check here ===========

Script v.2025-08-09

*** BASE SYSTEM ***
Operating System: Raspbian GNU/Linux 12 (bookworm)
 Static hostname: raspberrypi
       Icon name: computer
          Kernel: Linux 6.1.74-v8+
    Architecture: arm64
OS is similar to: debian

Model           : Raspberry Pi 4 Model B Rev 1.2
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 32 bit

Systemuptime and Load:
 08:32:36 up 8 days,  9:54,  2 users,  load average: 0.09, 0.17, 0.26
CPU threads: 4


*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'bookworm'!

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** TIME AND TIMEZONES ***
               Local time: Fri 2025-12-19 08:32:36 CET
           Universal time: Fri 2025-12-19 07:32:36 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
pi
HOME=/home/pi
GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi iobroker

User that is running 'js-controller':
js-controller is not running

*** DISPLAY-SERVER SETUP ***
Display-Server:         false
Display-Manager:        * lightdm.service - Light Display Manager
Desktop:
Session:                tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            4.0G        198M        2.5G        1.2M        1.4G        3.8G
Swap:           209M          0B        209M
Total:          4.2G        198M        2.7G

Active iob-Instances:   1

         3793 M total memory
          188 M used memory
          217 M active memory
          877 M inactive memory
         2382 M free memory
          289 M buffer memory
         1009 M swap cache
          199 M total swap
            0 M used swap
          199 M free swap

*** top - Table Of Processes  ***
top - 08:32:36 up 8 days,  9:54,  2 users,  load average: 0.09, 0.17, 0.26
Tasks: 144 total,   1 running, 143 sleeping,   0 stopped,   0 zombie
%Cpu(s):  0.0 us,  0.0 sy,  0.0 ni,100.0 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   3793.3 total,   2382.1 free,    188.9 used,   1298.9 buff/cache
MiB Swap:    200.0 total,    200.0 free,      0.0 used.   3604.4 avail Mem

*** FAILED SERVICES ***

  UNIT             LOAD   ACTIVE SUB    DESCRIPTION
* dnsmasq.service  loaded failed failed dnsmasq - A lightweight DHCP and caching DNS server
* iobroker.service loaded failed failed ioBroker Server

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.
2 loaded units listed.


*** DMESG CRITICAL ERRORS ***
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       29G   16G   12G  58% /
devtmpfs       devtmpfs  1.9G     0  1.9G   0% /dev
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     759M  1.1M  758M   1% /run
tmpfs          tmpfs     5.0M  8.0K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      253M   52M  201M  21% /boot
tmpfs          tmpfs     380M   56K  380M   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Wed Dec 10 22:38:23 2025] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=/dev/ttyS0 root=PARTUUID=97709164-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait smsc95xx.macaddr=dc:a6:32:98:d1:5d
[Wed Dec 10 22:38:23 2025] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
[Wed Dec 10 22:38:23 2025] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Wed Dec 10 22:38:25 2025] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.

Show mounted filesystems:
TARGET  SOURCE         FSTYPE OPTIONS
/       /dev/mmcblk0p2 ext4   rw,noatime
`-/boot /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro

Files in neuralgic directories:

/var:
3.3G    /var/
1.9G    /var/log
1.2G    /var/log/lightdm
1003M   /var/cache
987M    /var/cache/apt

Archived and active journals take up 765.8M in the file system.

/opt/iobroker/backups:
443M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
425M    /opt/iobroker/iobroker-data/
193M    /opt/iobroker/iobroker-data/backup-objects
167M    /opt/iobroker/iobroker-data/files
47M     /opt/iobroker/iobroker-data/files/admin.admin
46M     /opt/iobroker/iobroker-data/files/admin.admin/custom/assets

The five largest files in iobroker-data are:
29M     /opt/iobroker/iobroker-data/objects.jsonl
14M     /opt/iobroker/iobroker-data/objects.json.migrated
14M     /opt/iobroker/iobroker-data/objects.json.bak.migrated
4.6M    /opt/iobroker/iobroker-data/files/javascript.admin/vs/language/typescript/tsWorker.js
4.6M    /opt/iobroker/iobroker-data/backup-objects/2025-12-19_06-40_objects.jsonl.gz

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-EnOcean_GmbH_EnOcean_USB_300_DC_FT411J9V-if00-port0


Zigbee Network Settings on your coordinator/in nvbackup are:
zigbee.*
Extended Pan ID:
grep: /opt/iobroker/iobroker-data/zigbee_*/nvbackup.json: No such file or directory
Pan ID:
grep: /opt/iobroker/iobroker-data/zigbee_*/nvbackup.json: No such file or directory
/home/iobroker/.diag.sh: line 713: printf: 0x: invalid hex number
0
Channel:
grep: /opt/iobroker/iobroker-data/zigbee_*/nvbackup.json: No such file or directory
Network Key:
grep: /opt/iobroker/iobroker-data/zigbee_*/nvbackup.json: No such file or directory

*** NodeJS-Installation ***

/usr/bin/nodejs         v20.19.1
/usr/bin/node           v20.19.1
/usr/bin/npm            10.8.2
/usr/bin/npx            10.8.2
/usr/bin/corepack       0.31.0

nodejs:
  Installed: 20.19.1-1nodesource1
  Candidate: 20.19.1-1nodesource1
  Version table:
 *** 20.19.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
        100 /var/lib/dpkg/status
     20.19.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.18.3-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.18.2-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.18.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.18.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.17.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.16.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.15.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.15.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.14.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.13.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.13.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.12.2-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.12.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.12.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.11.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.11.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.10.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.9.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.8.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.8.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.7.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.6.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.6.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.5.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.5.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.4.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.3.1-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.3.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.2.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.1.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.0.0-1nodesource1 600
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     18.20.4+dfsg-1~deb12u1+rpi1 500
        500 http://raspbian.raspberrypi.org/raspbian bookworm/main armhf Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected
Checking for nodejs vulnerability:
Need to install the following packages:
is-my-node-vulnerable@1.6.1
Ok to proceed? (y)

Nach Y und Enter
und 2 Stunden Wartezeit habe ich PuTTY geschlossen.

[Thomas Braun]

@zanabria sagte in Onkyo Instanz für "TX-NR 616" funktioniert nicht mehr:

Userland : 32 bit

Installier da NEU das aktuelle Release RaspberryOS 13 'Trixie'.
In der 64Bit-Lite-Version, ohne Desktop.

Die Kiste dann künftig regelmäßiger bzw. überhaupt mal aktuell halten.

[zanabria]

Ja, mache ich nach Weihnachten.
Dir schöne Feiertage und Danke für die Hilfe.