Weihnachtsangebot 2025! 🎄

[legro]

@Thomas-Braun

Vorgeschichte ..

Ich bin ja von meine Pi 4 -> Pi 5 umgezogen. Ist hier ggf. verloren gegangen?

Auf dem Pi 4 habe ich als Installationquelle die sog. "phantastischen Repositories" installiert.

[Thomas Braun]

@legro sagte in BackItUp sichert InfluxDB nicht mehr:

Leider erhalte ich anschließend denselben Fehler beim Installieren wie zuvor.

Weil die Quelle nicht angelegt wurde...

Stell dich in dein home und leg es danach an:

https://forum.iobroker.net/topic/59231/phantastische-repositories-und-wo-sie-zu-finden-sind

[Thomas Braun]

@legro sagte in BackItUp sichert InfluxDB nicht mehr:

Ist hier ggf. verloren gegangen?

Externe Quellen müssen neu angelegt werden.

[legro]

@Thomas-Braun sagte in BackItUp sichert InfluxDB nicht mehr:

Externe Quellen müssen neu angelegt werden.

Oh, da wird meine Dokumentation noch länger. ;-)

Ich habe nun die Quellen neu angelegt. Anschließend sudo apt update & upgrade durchgeführt. Leider war das Ganze nicht erfolgreich.

pi@Pi5:~ $ sudo apt install influxdb2-cli
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
influxdb2-cli is already the newest version (2.7.5-2).
The following packages were automatically installed and are no longer required:
  libunwind8 linux-headers-6.12.34+rpt-common-rpi linux-kbuild-6.12.34+rpt rpicam-apps-lite
Use 'sudo apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

[legro]

Nach meiner Dokumentation hatte ich bei der Vorbereitung des Umzugs den Pi 5 nicht nur mit dem neuesten OS ausgestattet, sondern ich hatte vorsorglich bereits alle Repositories eingepflegt bevor ich mittels BackItUp den Umzug einläutete.

[Thomas Braun]

@legro sagte in BackItUp sichert InfluxDB nicht mehr:

influxdb2-cli is already the newest version (2.7.5-2).

Heißt: Das Paket ist schon installiert.

[legro]

@Thomas-Braun

Ich habe das Backup erneut angestoßen: Es funktioniert! Super! Vielen Dank für deine wieder einmal großartige Unterstützung!

21:47:14.466DEBUGinfluxDBStart InfluxDB Backup ...
21:47:14.472DEBUGinfluxDBInfluxDB Backup tmp directory created
21:48:27.395DEBUGinfluxDBPacked 202MB so far...
21:48:37.472DEBUGinfluxDBPacked 406MB so far...
21:48:47.414DEBUGinfluxDBPacked 612MB so far...
21:48:57.400DEBUGinfluxDBPacked 797MB so far...
21:49:02.837DEBUGinfluxDBBackup created: /opt/iobroker/backups/influxDB_2025_11_21-21_47_15_ioBroker_backupiobroker.tar.gz
21:49:02.968DEBUGinfluxDBTry deleting the InfluxDB tmp directory: "/opt/iobroker/backups/influxDB_2025_11_21-21_47_15_ioBroker_backupiobroker"
21:49:04.731DEBUGinfluxDBdone

Der Pi4 -> Pi5 ist wie Trabbi -> BMW ;-)

[Laser]

Bei mir wird influxdb seit 4 Wochen nicht mehr gesichert. Änderungen seit dem- nur Linux- Updates.
Backitup bleibt mit 100% CPU Auslastung hier stehen:
13:34:37.871DEBUGinfluxDBInfluxDB-Backup started ...
13:34:37.904DEBUGinfluxDBStart InfluxDB Backup ...
13:34:37.911DEBUGinfluxDBInfluxDB Backup tmp directory created

in der Konsole:

xxxx@neuheizung:~ $ ls
export influxdb2-client-2.7.5-linux-arm64.tar.gz README.md
influx influxdb2-client-2.7.5-linux-arm64.tar.gz.1
influxdata-archive.key LICENSE

die Zeile mit "export" ist rot

[Thomas Braun]

@Laser

Das hast du nicht ordentlich über deinen Paketmanager installiert, scheint mir.
NUTZ das Ding, dafür ist er ja da! Mit tar.gz machst du auf einem Debian i.d.R. gar nichts.

[Laser]

Ich soll was genau über den Paketmanager installieren? Backitup? Influx habe ich seit über 1 Jahr nicht angefasst. Bis vor 4 Wochen funktionierte das Backup ja.
sudo apt update und sudo apt upgrade gemacht.

[Thomas Braun]

@Laser sagte in BackItUp sichert InfluxDB nicht mehr:

sudo apt update und sudo apt upgrade gemacht.

Zeig mal die Ausgabe davon. Ich befürchte, du hast da u. u. eine doppelte Installation.
Einmal über den Paketmanager und dann eine 'wilde' Installation am Paketmanager vorbei.
Warum sollte da sonst ein tarball in dem Verzeichnis liegen?

[Laser]

Update:

xxxx@neuheizung:~ $ sudo apt update
Hit:1 http://deb.debian.org/debian bookworm InRelease
Get:2 http://deb.debian.org/debian-security bookworm-security InRelease [48.0 kB]
Hit:3 http://archive.raspberrypi.com/debian bookworm InRelease
Get:4 http://deb.debian.org/debian bookworm-updates InRelease [55.4 kB]
Hit:5 https://repos.influxdata.com/debian stable InRelease
Get:6 https://packages.grafana.com/enterprise/deb stable InRelease [7,660 B]
Hit:7 https://deb.nodesource.com/node_20.x nodistro InRelease
Get:8 http://deb.debian.org/debian-security bookworm-security/main armhf Packages [270 kB]
Get:9 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages [285 kB]
Err:6 https://packages.grafana.com/enterprise/deb stable InRelease
  The following signatures were invalid: EXPKEYSIG 963FA27710458545 Grafana Labs <engineering@grafana.com>
Fetched 666 kB in 4s (185 kB/s)
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
2 packages can be upgraded. Run 'apt list --upgradable' to see them.
W: https://packages.grafana.com/enterprise/deb/dists/stable/InRelease: Key is stored in legacy trusted.gpg keyring (/etc/apt/trusted.gpg), see the DEPRECATION section in apt-key(8) for details.
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://packages.grafana.com/enterprise/deb stable InRelease: The following signatures were invalid: EXPKEYSIG 963FA27710458545 Grafana Labs <engineering@grafana.com>
W: Failed to fetch https://packages.grafana.com/enterprise/deb/dists/stable/InRelease  The following signatures were invalid: EXPKEYSIG 963FA27710458545 Grafana Labs <engineering@grafana.com>
W: Some index files failed to download. They have been ignored, or old ones used instead.

[Laser]

Upgrade (die Vorversion ist natürlich weg):
wieso gehen die Code-Tags nicht mehr?

xxxx@neuheizung:~ $ sudo apt upgrade
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Calculating upgrade... Done
The following packages were automatically installed and are no longer required:
  linux-headers-6.12.20+rpt-common-rpi linux-headers-6.12.20+rpt-rpi-2712
  linux-headers-6.12.20+rpt-rpi-v8 linux-headers-6.12.25+rpt-common-rpi
  linux-headers-6.12.25+rpt-rpi-2712 linux-headers-6.12.25+rpt-rpi-v8
  linux-headers-6.6.51+rpt-common-rpi linux-headers-6.6.51+rpt-rpi-2712
  linux-headers-6.6.51+rpt-rpi-v8 linux-headers-6.6.62+rpt-common-rpi
  linux-headers-6.6.62+rpt-rpi-2712 linux-headers-6.6.62+rpt-rpi-v8
  linux-headers-6.6.74+rpt-common-rpi linux-headers-6.6.74+rpt-rpi-2712
  linux-headers-6.6.74+rpt-rpi-v8 linux-image-6.12.20+rpt-rpi-2712
  linux-image-6.12.20+rpt-rpi-v8 linux-image-6.12.25+rpt-rpi-2712
  linux-image-6.12.25+rpt-rpi-v8 linux-image-6.6.51+rpt-rpi-2712
  linux-image-6.6.51+rpt-rpi-v8 linux-image-6.6.62+rpt-rpi-2712
  linux-image-6.6.62+rpt-rpi-v8 linux-image-6.6.74+rpt-rpi-2712
  linux-image-6.6.74+rpt-rpi-v8 linux-kbuild-6.12.20+rpt
  linux-kbuild-6.12.25+rpt linux-kbuild-6.6.51+rpt linux-kbuild-6.6.62+rpt
  linux-kbuild-6.6.74+rpt
Use 'sudo apt autoremove' to remove them.
The following packages have been kept back:
  raspi-utils
The following packages will be upgraded:
  rpi-eeprom
1 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.
Need to get 3,940 kB of archives.
After this operation, 5,245 kB of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 http://archive.raspberrypi.com/debian bookworm/main arm64 rpi-eeprom all 28.9-1 [3,940 kB]
Fetched 3,940 kB in 2s (2,295 kB/s)
Reading changelogs... Done
(Reading database ... 207535 files and directories currently installed.)
Preparing to unpack .../rpi-eeprom_28.9-1_all.deb ...
Unpacking rpi-eeprom (28.9-1) over (28.7-1~bookworm) ...
Setting up rpi-eeprom (28.9-1) ...
Processing triggers for man-db (2.11.2-2) ...

[Thomas Braun]

@Laser sagte in BackItUp sichert InfluxDB nicht mehr:

Solche Ausgaben aus dem Terminal bitte in CodeTags, danke.

raspi-utils

sudo apt upgrade raspi-utils

Und dann die Kiste einmal sauber durchstarten.

iob stop
sudo reboot

[Thomas Braun]

@Laser

Und dann legst du das grafana-Repository nochmal danach neu an:

https://forum.iobroker.net/topic/59231/phantastische-repositories-und-wo-sie-zu-finden-sind

[Laser]

Die Code Tags werden mir nicht mehr angeboten. Muß mal einen anderen Browser nehmen. z.Zt. Edge
Liegt vermutlich an meinem verwendeten "schnell antworten" Code Tags gehen.
Aber Backitup bleibt immer noch hängen...

[Thomas Braun]

@Laser sagte in BackItUp sichert InfluxDB nicht mehr:

Ligt vermutlich an meinem verwendeten "schnell antworten"

Du darfst dir gerne Zeit für ein ordentliches Posting nehmen.

[Laser]

Code Tags gehen wieder. Habe die vorherigen Beiträge korrigiert. Ebenso den Rechtschreibfehler bei "ligt".
Nur Backitup funktioniert immer noch nicht. Bleibt wie vorher stehen.
"Wilde Installation" -warum sollte ich etwas "wild" installieren? Zumindest nicht absichtlich.

[Thomas Braun]

@Laser

Was tust du dann mit den beiden Dateien in deinem /home?

influxdb2-client-2.7.5-linux-arm64.tar.gz
influxdb2-client-2.7.5-linux-arm64.tar.gz1

Für eine ordentliche Installation via Paketmanager braucht man die nicht.

Paketquellen aufgeräumt?
Was sagt denn

iob diag

zum Gesamtzustand der Kiste?

[Laser]

Wie diese beiden Dateien dort hinkommen, weiß ich nicht (mehr).

========== Start marking the full check here ===========

```bash
Script v.2025-08-09

*** BASE SYSTEM ***
Operating System: Debian GNU/Linux 12 (bookworm)
 Static hostname: neuheizung
       Icon name: computer
          Kernel: Linux 6.12.47+rpt-rpi-v8
    Architecture: arm64
OS is similar to:

Model           : Raspberry Pi 4 Model B Rev 1.5
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 64 bit

Systemuptime and Load:
 15:13:07 up 24 min,  2 users,  load average: 2.27, 2.96, 2.57
CPU threads: 4


*** LIFE CYCLE STATUS ***
Debian 'bookworm' is the current oldstable version. Please upgrade to the latest stable release 'trixie' in due time!

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** TIME AND TIMEZONES ***
               Local time: Thu 2025-12-04 15:13:07 CET
           Universal time: Thu 2025-12-04 14:13:07 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
otto
HOME=/home/otto
GROUPS=otto adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

*** DISPLAY-SERVER SETUP ***
Display-Server:         false
Unit display-manager.service could not be found.
Display-Manager:
Desktop:
Session:                tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            8.2G        2.5G        1.7G        1.2M        4.1G        5.7G
Swap:           209M          0B        209M
Total:          8.4G        2.5G        1.9G

Active iob-Instances:   28

         7819 M total memory
         2365 M used memory
         2809 M active memory
         3195 M inactive memory
         1624 M free memory
           47 M buffer memory
         3875 M swap cache
          199 M total swap
            0 M used swap
          199 M free swap

*** top - Table Of Processes  ***
top - 15:13:08 up 24 min,  2 users,  load average: 2.27, 2.96, 2.57
Tasks: 210 total,   1 running, 209 sleeping,   0 stopped,   0 zombie
%Cpu(s): 10.0 us, 10.0 sy,  0.0 ni, 60.0 id, 10.0 wa,  0.0 hi, 10.0 si,  0.0 st
MiB Mem :   7819.8 total,   1623.0 free,   2367.0 used,   3922.7 buff/cache
MiB Swap:    200.0 total,    200.0 free,      0.0 used.   5452.8 avail Mem

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.


*** DMESG CRITICAL ERRORS ***
29 CRITICAL ERRORS DETECTED!
Check 'sudo dmesg --level=emerg,alert,crit -T' for details

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  3.6G     0  3.6G   0% /dev
tmpfs          tmpfs     1.6G  1.2M  1.6G   1% /run
/dev/sda2      ext4      110G   61G   44G  59% /
tmpfs          tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs          tmpfs     5.0M   16K  5.0M   1% /run/lock
/dev/sda1      vfat      510M   66M  445M  13% /boot/firmware
tmpfs          tmpfs     782M     0  782M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Thu Dec  4 14:48:56 2025] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  numa=fake=2 system_heap.max_order=0 smsc95xx.macaddr=D8:3A:DD:0D:3B:C5 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000  console=ttyS0,115200 console=tty1 root=PARTUUID=522926e5-02 rootfstype=ext4 fsck.repair=yes rootwait
[Thu Dec  4 14:48:59 2025] EXT4-fs (sda2): mounted filesystem 6835594d-a5f3-459f-a244-318060e7e0ab ro with ordered data mode. Quota mode: none.
[Thu Dec  4 14:49:01 2025] EXT4-fs (sda2): re-mounted 6835594d-a5f3-459f-a244-318060e7e0ab r/w.

Show mounted filesystems:
TARGET           SOURCE    FSTYPE OPTIONS
/                /dev/sda2 ext4   rw,noatime
`-/boot/firmware /dev/sda1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
36G     /var/
34G     /var/lib/influxdb/engine/data/7b6dd0929a6bb818/autogen
34G     /var/lib/influxdb/engine/data/7b6dd0929a6bb818
34G     /var/lib/influxdb/engine/data
34G     /var/lib/influxdb/engine

Archived and active journals take up 1023.5M in the file system.

/opt/iobroker/backups:
9.5G    /opt/iobroker/backups/
814M    /opt/iobroker/backups/influxDB_2025_02_01-10_20_38_backupiobroker
4.0K    /opt/iobroker/backups/influxDB_2023_11_20-10_53_21_backupiobroker

/opt/iobroker/iobroker-data:
7.5G    /opt/iobroker/iobroker-data/
7.0G    /opt/iobroker/iobroker-data/history
406M    /opt/iobroker/iobroker-data/files
98M     /opt/iobroker/iobroker-data/backup-objects
73M     /opt/iobroker/iobroker-data/files/vis-2

The five largest files in iobroker-data are:
26M     /opt/iobroker/iobroker-data/files/echarts/static/js/main.41cee985.js.map
26M     /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.41cee985.js.map
24M     /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js.map
24M     /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.70a15e1f.js.map
20M     /opt/iobroker/iobroker-data/objects.jsonl

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-1a86_USB2.0-Ser_-if00-port0
/dev/serial/by-id/usb-VictronEnergy_BV_VE_Direct_cable_VE82E1IJ-if00-port0

*** ZigBee Settings ***
Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


*** NodeJS-Installation ***

/usr/bin/nodejs         v20.19.6
/usr/bin/node           v20.19.6
/usr/bin/npm            10.8.2
/usr/bin/npx            10.8.2
/usr/bin/corepack       0.34.1

nodejs:
  Installed: 20.19.6-1nodesource1
  Candidate: 20.19.6-1nodesource1
  Version table:
 *** 20.19.6-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     20.19.5-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.19.4-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.19.3-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.19.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.19.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.18.3-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.11.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.8.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.6.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.3.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     20.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages
     18.20.4+dfsg-1~deb12u1 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages
        500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

Checking for nodejs vulnerability:


 █████  ██      ██           ██████   ██████   ██████  ██████         ██
██   ██ ██      ██          ██       ██    ██ ██    ██ ██   ██     ██  ██
███████ ██      ██          ██   ███ ██    ██ ██    ██ ██   ██         ██
██   ██ ██      ██          ██    ██ ██    ██ ██    ██ ██   ██     ██  ██
██   ██ ███████ ███████      ██████   ██████   ██████  ██████         ██



*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
debian11            debian11 (version: 4.0.24, hostname: debian11      , dead, uptime: 198)
neuheizung          neuheizung (version: 7.0.7, hostname: neuheizung    , alive, uptime: 1438)

Core adapters versions
js-controller:  7.0.7
admin:          7.7.19
javascript:     9.0.11

nodejs modules from github:     1
+-- iobroker.vedirect@0.3.3 (git+ssh://git@github.com/DrozmotiX/ioBroker.vedirect.git#0a83b8b987ee94d0c49f2ee7299bbb8d5d329dde)

Adapter State
+ system.adapter.admin.1                  : admin                 : neuheizung                               -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.alias-manager.0          : alias-manager         : neuheizung                               - disabled
+ system.adapter.backitup.0               : backitup              : neuheizung                               -  enabled
+ system.adapter.discovery.0              : discovery             : neuheizung                               -  enabled
+ system.adapter.echarts.0                : echarts               : neuheizung                               -  enabled
+ system.adapter.email.0                  : email                 : neuheizung                               -  enabled
+ system.adapter.energiefluss.0           : energiefluss          : neuheizung                               -  enabled
  system.adapter.flot.0                   : flot                  : neuheizung                               - disabled
+ system.adapter.history.0                : history               : neuheizung                               -  enabled
+ system.adapter.hm-rega.0                : hm-rega               : neuheizung                               -  enabled
+ system.adapter.hm-rpc.0                 : hm-rpc                : neuheizung                               -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : neuheizung                               -  enabled, port: 0
  system.adapter.i2c.0                    : i2c                   : neuheizung                               - disabled
+ system.adapter.influxdb.0               : influxdb              : neuheizung                               -  enabled, port: 8086
+ system.adapter.javascript.0             : javascript            : neuheizung                               -  enabled
+ system.adapter.modbus.0                 : modbus                : neuheizung                               -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : neuheizung                               -  enabled, port: 1886, bind: 0.0.0.0
+ system.adapter.opendtu.0                : opendtu               : neuheizung                               -  enabled
+ system.adapter.opendtu.1                : opendtu               : neuheizung                               -  enabled
+ system.adapter.opendtu.2                : opendtu               : neuheizung                               -  enabled
+ system.adapter.owfs.0                   : owfs                  : neuheizung                               -  enabled, port: 4304
+ system.adapter.rpi2.0                   : rpi2                  : neuheizung                               -  enabled
+ system.adapter.shelly.0                 : shelly                : neuheizung                               -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.shelly.1                 : shelly                : neuheizung                               -  enabled, port: 1884, bind: 0.0.0.0
+ system.adapter.shuttercontrol.0         : shuttercontrol        : neuheizung                               -  enabled
+ system.adapter.simple-api.0             : simple-api            : neuheizung                               -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.sourceanalytix.0         : sourceanalytix        : neuheizung                               -  enabled
+ system.adapter.vedirect.0               : vedirect              : neuheizung                               -  enabled
+ system.adapter.vis-2.0                  : vis-2                 : neuheizung                               -  enabled
  system.adapter.vis-colorpicker.0        : vis-colorpicker       : neuheizung                               -  enabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : neuheizung                               - disabled
  system.adapter.vis-material.0           : vis-material          : neuheizung                               - disabled
  system.adapter.vis-metro.0              : vis-metro             : neuheizung                               - disabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : neuheizung                               - disabled
  system.adapter.vis.0                    : vis                   : neuheizung                               -  enabled
+ system.adapter.web.0                    : web                   : neuheizung                               -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.1                  : admin                 : neuheizung                               -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.hm-rpc.0                 : hm-rpc                : neuheizung                               -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : neuheizung                               -  enabled, port: 0
+ system.adapter.influxdb.0               : influxdb              : neuheizung                               -  enabled, port: 8086
+ system.adapter.mqtt.0                   : mqtt                  : neuheizung                               -  enabled, port: 1886, bind: 0.0.0.0
+ system.adapter.owfs.0                   : owfs                  : neuheizung                               -  enabled, port: 4304
+ system.adapter.shelly.0                 : shelly                : neuheizung                               -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.shelly.1                 : shelly                : neuheizung                               -  enabled, port: 1884, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : neuheizung                               -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : neuheizung                               -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): stable
Upgrade policy: none

Installed ioBroker-Adapters
Used repository: stable
Adapter    "admin"        : 7.7.19   , installed 7.7.19
Adapter    "alias-manager": 2.0.0    , installed 2.0.0
Adapter    "backitup"     : 3.3.10   , installed 3.3.10
Adapter    "discovery"    : 5.0.0    , installed 5.0.0
Adapter    "echarts"      : 1.9.2    , installed 1.9.2
Adapter    "email"        : 2.0.4    , installed 2.0.4
Adapter    "energiefluss" : 3.6.2    , installed 3.6.2
Adapter    "flot"         : 1.12.0   , installed 1.12.0
Adapter    "history"      : 3.0.1    , installed 3.0.1
Adapter    "hm-rega"      : 5.1.0    , installed 5.1.0
Adapter    "hm-rpc"       : 2.0.2    , installed 2.0.2
Adapter    "i2c"          : 1.2.1    , installed 1.2.1
Adapter    "influxdb"     : 4.0.2    , installed 4.0.2
Adapter    "javascript"   : 9.0.11   , installed 9.0.11
Controller "js-controller": 7.0.7    , installed 7.0.7
Adapter    "modbus"       : 6.3.2    , installed 6.3.2
Adapter    "mqtt"         : 6.1.4    , installed 6.1.4
Adapter    "opendtu"      : 3.1.0    , installed 3.1.0
Adapter    "owfs"         : 0.7.0    , installed 0.7.0
Adapter    "rpi2"         : 2.4.0    , installed 2.4.0
Adapter    "shelly"       : 10.4.1   , installed 10.4.1
Adapter    "shuttercontrol": 2.0.7   , installed 2.0.7
Adapter    "simple-api"   : 2.8.0    , installed 2.8.0
Adapter    "socketio"     : 6.7.1    , installed 6.7.1
Adapter    "vis"          : 1.5.6    , installed 1.5.6
Adapter    "vis-2"        : 2.13.4   , installed 2.13.4
Adapter    "vis-colorpicker": 2.0.3  , installed 2.0.3
Adapter    "vis-hqwidgets": 1.5.1    , installed 1.5.1
Adapter    "vis-material" : 0.2.0    , installed 0.2.0
Adapter    "vis-metro"    : 1.2.0    , installed 1.2.0
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "web"          : 7.0.8    , installed 7.0.8
Adapter    "ws"           : 2.6.2    , installed 2.6.2

Objects and States
Please stand by - This may take a while
Objects:        4514
States:         3686

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:4 https://repos.influxdata.com/debian stable InRelease
Hit:5 http://deb.debian.org/debian bookworm-updates InRelease
Hit:6 https://deb.nodesource.com/node_20.x nodistro InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          6361       731/sshd: /usr/sbin
tcp        0      0 0.0.0.0:9000            0.0.0.0:*               LISTEN      1001       6885       909/iobroker.js-con
tcp        0      0 0.0.0.0:9001            0.0.0.0:*               LISTEN      1001       976        909/iobroker.js-con
tcp        0      0 192.168.2.54:2010       0.0.0.0:*               LISTEN      1001       9424       1141/io.hm-rpc.0
tcp        0      0 192.168.2.54:2001       0.0.0.0:*               LISTEN      1001       9453       1156/io.hm-rpc.1
tcp        0      0 0.0.0.0:1884            0.0.0.0:*               LISTEN      1001       10947      1355/io.shelly.1
tcp        0      0 0.0.0.0:1886            0.0.0.0:*               LISTEN      1001       9689       1385/io.mqtt.0
tcp        0      0 0.0.0.0:1882            0.0.0.0:*               LISTEN      1001       9634       1278/io.shelly.0
tcp6       0      0 :::22                   :::*                    LISTEN      0          6363       731/sshd: /usr/sbin
tcp6       0      0 :::3000                 :::*                    LISTEN      106        6928       908/grafana
tcp6       0      0 :::8086                 :::*                    LISTEN      999        6849       789/influxd
tcp6       0      0 :::8087                 :::*                    LISTEN      1001       9748       1430/io.simple-api.
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       7305       939/io.admin.1
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       13210      1464/io.web.0
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           104        4920       574/avahi-daemon: r
udp        0      0 0.0.0.0:35882           0.0.0.0:*                           104        4922       574/avahi-daemon: r
udp6       0      0 fe80::75d1:70aa:4ea:546 :::*                                0          6414       676/NetworkManager
udp6       0      0 :::5353                 :::*                                104        4921       574/avahi-daemon: r
udp6       0      0 :::42613                :::*                                104        4923       574/avahi-daemon: r

*** Log File - Last 25 Lines ***

2025-12-04 14:51:10.912  - error: shelly.1 (1355) [MQTT] Error in function setMqttPrefixHttp (Gen 1) for client undefined: TypeError: Cannot read properties of undefined (reading 'replace')
2025-12-04 14:51:10.917  - error: shelly.1 (1355) [MQTT] Unable to get mqttprefix of client with id "shellypmminig3-543204701224"
2025-12-04 14:51:12.448  - error: shelly.0 (1278) [MQTT] Unable to get mqttprefix of client with id "shelly1pmminig3-543204508220"
2025-12-04 14:51:12.589  - error: shelly.0 (1278) [MQTT] Unable to get mqttprefix of client with id "shellyplus2pm-80646fdbcf04"
2025-12-04 14:51:13.460  - error: shelly.0 (1278) [MQTT] Error in function setMqttPrefixHttp (Gen 1) for client undefined: TypeError: Cannot read properties of undefined (reading 'replace')
2025-12-04 14:51:13.461  - error: shelly.0 (1278) [MQTT] Unable to get mqttprefix of client with id "shelly1pmminig3-543204505ee4"
2025-12-04 14:51:16.076  - info: host.neuheizung instance system.adapter.web.0 in version "7.0.8" started with pid 1464
2025-12-04 14:51:20.078  - info: host.neuheizung instance system.adapter.vis-2.0 in version "2.13.4" started with pid 1475
2025-12-04 14:51:28.103  - info: host.neuheizung instance system.adapter.energiefluss.0 in version "3.6.2" started with pid 1505
2025-12-04 14:51:33.143  - warn: energiefluss.0 (1505) The adapter could not find the state alias.0.ZaehlerET.zaehler-Watt! Please review your configuration of the adapter!
2025-12-04 14:51:34.015  - info: host.neuheizung instance system.adapter.vis.0 terminated while should be started once
2025-12-04 15:01:43.937  - error: hm-rega.0 (1086) post request error: socket hang up
2025-12-04 15:01:43.942  - error: hm-rega.0 (1086) CCU 192.168.2.85 unreachable
2025-12-04 15:05:56.744  - warn: opendtu.2 (1370) setInverterLimit axios error: Error: socket hang up
2025-12-04 15:08:19.912  - warn: host.neuheizung "system.host.debian11" is offline
2025-12-04 15:10:22.983  - info: host.neuheizung stopInstance system.adapter.backitup.0 (force=false, process=true)
2025-12-04 15:10:23.034  - info: host.neuheizung stopInstance system.adapter.backitup.0 send kill signal
2025-12-04 15:10:23.694  - info: host.neuheizung instance system.adapter.backitup.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2025-12-04 15:10:27.575  - info: host.neuheizung instance system.adapter.backitup.0 in version "3.3.10" started with pid 3313
2025-12-04 15:10:33.642  - error: backitup.0 (3313) Error: Command failed: sudo mount -t cifs -o username=iobroker,password=****,rw,forceuid,uid=iobroker,forcegid,gid=iobroker,file_mode=0777,dir_mode=0777 //192.168.2.57/backup /opt/iobroker/backups
mount error(16): Device or resource busy
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) and kernel log messages (dmesg)

2025-12-04 15:14:07.211  - warn: host.neuheizung "system.host.debian11" is offline
2025-12-04 15:14:07.497  - warn: host.neuheizung "system.host.debian11" is offline

============ Mark until here for C&P =============

iob diag has finished.

Soll ich "bookworm" ersetzen oder erst mal nicht?