NEWS
Zigbee Stick keine Verbindung/nach Update
Hardware
12
Beiträge
4
Kommentatoren
261
Aufrufe
4
Watching
-
Hallo zusammen,
zur Zeit ist mal wieder der Wurm drin.
Ich habe erst die node.js aktuallisieren müssen, um den Zigbee Adapter zu updaten.
Seitdem sind alle Geräte weg und es erkannt den Stick nicht mehr.Zigbee Version 3.1.5
lsusb zeigt ihn mir an:
admin@iobroker:~ $ lsusb Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 1cf1:0030 Dresden Elektronik ZigBee gateway [ConBee II]Bei ls -la .. kommt allerdings kein Zugriff.
admin@iobroker:~ $ ls -la /dev/serial/by-id ls: cannot access '/dev/serial/by-id': No such file or directoryapt policy udev sagt bei mir:
admin@iobroker:~ $ apt policy udev E: Type 'sudo' is not known on line 1 in source list /etc/apt/sources.list.d/backports.list E: The list of sources could not be read. admin@iobroker:~ $Zum Abschluss noch iob diag
========== Start marking the full check here =========== ```bash Script v.2025-08-09 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 12 (bookworm) Static hostname: iobroker Icon name: computer Kernel: Linux 6.12.47+rpt-rpi-2712 Architecture: arm64 OS is similar to: Model : Raspberry Pi 5 Model B Rev 1.0 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 17:54:26 up 47 min, 3 users, load average: 0.99, 0.38, 0.29 CPU threads: 4 *** LIFE CYCLE STATUS *** Debian 'bookworm' is the current oldstable version. Please upgrade to the latest stable release 'trixie' in due time! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Wed 2025-11-12 17:54:26 CET Universal time: Wed 2025-11-12 16:54:26 UTC RTC time: Wed 2025-11-12 16:54:26 Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': admin HOME=/home/admin GROUPS=admin adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Display-Manager: * lightdm.service - Light Display Manager Desktop: Session: tty *** MEMORY *** total used free shared buff/cache available Mem: 8.5G 2.4G 4.6G 5.2M 1.6G 6.1G Swap: 536M 0B 536M Total: 9.0G 2.4G 5.1G Active iob-Instances: 26 8063 M total memory 2248 M used memory 2233 M active memory 1107 M inactive memory 4358 M free memory 149 M buffer memory 1398 M swap cache 511 M total swap 0 M used swap 511 M free swap *** top - Table Of Processes *** top - 17:54:28 up 47 min, 3 users, load average: 1.00, 0.39, 0.29 Tasks: 193 total, 1 running, 192 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 0.0 sy, 0.0 ni,100.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 8063.1 total, 4357.2 free, 2250.0 used, 1548.8 buff/cache MiB Swap: 512.0 total, 512.0 free, 0.0 used. 5813.2 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * proc-sys-fs-binfmt_misc.mount loaded failed failed Arbitrary Executable File Formats File System * systemd-binfmt.service loaded failed failed Set Up Additional Binary Formats LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 2 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.9G 0 3.9G 0% /dev tmpfs tmpfs 807M 4.8M 802M 1% /run /dev/mmcblk0p2 ext4 58G 11G 45G 20% / tmpfs tmpfs 4.0G 32K 4.0G 1% /dev/shm tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock /dev/mmcblk0p1 vfat 510M 78M 433M 16% /boot/firmware tmpfs tmpfs 807M 176K 807M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Wed Nov 12 17:06:50 2025] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0 numa=fake=8 system_heap.max_order=0 iommu_dma_numa_policy=interleave smsc95xx.macaddr=2C:CF:67:93:F3:49 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=c36ce0f5-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Wed Nov 12 17:06:51 2025] EXT4-fs (mmcblk0p2): mounted filesystem a36be96c-66be-4487-a7a6-0481bca99d89 ro with ordered data mode. Quota mode: none. [Wed Nov 12 17:06:54 2025] EXT4-fs (mmcblk0p2): re-mounted a36be96c-66be-4487-a7a6-0481bca99d89 r/w. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 2.2G /var/ 1.1G /var/cache/apt 1.1G /var/cache 971M /var/cache/apt/archives 411M /var/log Archived and active journals take up 409.2M in the file system. /opt/iobroker/backups: 25M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 938M /opt/iobroker/iobroker-data/ 826M /opt/iobroker/iobroker-data/files 617M /opt/iobroker/iobroker-data/files/javascript.admin 560M /opt/iobroker/iobroker-data/files/javascript.admin/static 558M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 38M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map 24M /opt/iobroker/iobroker-data/files/scenes.admin/static/js/main.c9369f6c.js.map 16M /opt/iobroker/iobroker-data/objects.jsonl 9.1M /opt/iobroker/iobroker-data/states.jsonl USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/ttyACM0 Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v22.21.0 /usr/bin/node v22.21.0 /usr/bin/npm 10.9.4 /usr/bin/npx 10.9.4 /usr/bin/corepack 0.34.0 E: Type 'sudo' is not known on line 1 in source list /etc/apt/sources.list.d/backports.list E: The list of sources could not be read. Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: iobroker iobroker (version: 7.0.7, hostname: iobroker , alive, uptime: 2853) Core adapters versions js-controller: 7.0.7 admin: 7.7.19 javascript: 8.8.3 nodejs modules from github: 1 | +-- syno@3.0.0 (git+https://git@github.com/MeisterTR/syno.git#0104a973d33fe332aa6b1ab5be7fe8c57d3c68b0) Adapter State + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.alexa2.0 : alexa2 : iobroker - enabled + system.adapter.backitup.0 : backitup : iobroker - enabled + system.adapter.bshb.1 : bshb : iobroker - enabled system.adapter.cloud.0 : cloud : iobroker - disabled + system.adapter.device-reminder.0 : device-reminder : iobroker - enabled + system.adapter.discovery.0 : discovery : iobroker - enabled + system.adapter.homeconnect.0 : homeconnect : iobroker - enabled + system.adapter.hue.0 : hue : iobroker - enabled, port: 443 + system.adapter.hue.1 : hue : iobroker - enabled, port: 443 + system.adapter.hue.2 : hue : iobroker - enabled, port: 443 system.adapter.iot.0 : iot : iobroker - disabled + system.adapter.javascript.0 : javascript : iobroker - enabled + system.adapter.meross.0 : meross : iobroker - enabled + system.adapter.notification-manager.0 : notification-manager : iobroker - enabled + system.adapter.pushover.0 : pushover : iobroker - enabled + system.adapter.scenes.0 : scenes : iobroker - enabled + system.adapter.shuttercontrol.0 : shuttercontrol : iobroker - enabled + system.adapter.smartcontrol.0 : smartcontrol : iobroker - enabled + system.adapter.sonoff.0 : sonoff : iobroker - enabled, port: 1885, bind: 0.0.0.0 + system.adapter.sonos.0 : sonos : iobroker - enabled system.adapter.synology.0 : synology : iobroker - disabled, port: 5000 + system.adapter.tahoma.0 : tahoma : iobroker - enabled + system.adapter.tuya.0 : tuya : iobroker - enabled + system.adapter.viessmannapi.0 : viessmannapi : iobroker - enabled + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.wled.0 : wled : iobroker - enabled + system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: /dev/ttyACM0 system.adapter.zigbee2mqtt.0 : zigbee2mqtt : iobroker - disabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.hue.0 : hue : iobroker - enabled, port: 443 + system.adapter.hue.1 : hue : iobroker - enabled, port: 443 + system.adapter.hue.2 : hue : iobroker - enabled, port: 443 + system.adapter.sonoff.0 : sonoff : iobroker - enabled, port: 1885, bind: 0.0.0.0 + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: /dev/ttyACM0 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.7.19 , installed 7.7.19 Adapter "alexa2" : 3.27.4 , installed 3.27.4 Adapter "backitup" : 3.3.10 , installed 3.0.31 [Updatable] Adapter "bshb" : 0.5.0 , installed 0.3.0 [Updatable] Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "daikin" : 1.5.1 , installed 1.4.2 [Updatable] Adapter "device-reminder": 3.1.2 , installed 3.1.2 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "homeconnect" : 1.4.3 , installed 1.4.3 Adapter "hue" : 3.16.2 , installed 3.16.2 Adapter "iot" : 5.0.7 , installed 3.3.0 [Updatable] Adapter "javascript" : 8.9.2 , installed 8.8.3 [Updatable] Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "meross" : 1.17.0 , installed 1.17.0 Adapter "notification-manager": 1.3.0, installed 1.2.1 [Updatable] Adapter "pushover" : 4.1.0 , installed 4.1.0 Adapter "scenes" : 3.2.3 , installed 3.2.3 Adapter "shuttercontrol": 2.0.5 , installed 1.8.5 [Updatable] Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "smartcontrol" : 2.0.1 , installed 2.0.1 Adapter "socketio" : 6.7.1 , installed 6.6.1 [Updatable] Adapter "sonoff" : 3.2.1 , installed 3.1.2 [Updatable] Adapter "sonos" : 3.0.0 , installed 3.0.0 Adapter "synology" : 3.1.0 , installed 3.1.0 Adapter "tahoma" : 0.10.4 , installed 0.10.4 Adapter "tuya" : 3.16.0 , installed 3.16.0 Adapter "web" : 7.0.8 , installed 6.2.5 [Updatable] Adapter "wled" : 0.7.2 , installed 0.7.2 Adapter "ws" : 2.6.2 , installed 2.5.11 [Updatable] Adapter "zigbee" : 3.1.5 , installed 3.1.5 Adapter "zigbee2mqtt" : 3.0.9 , installed 3.0.9 Objects and States Please stand by - This may take a while Objects: 11202 States: 9574 *** OS-Repositories and Updates *** E: Type 'sudo' is not known on line 1 in source list /etc/apt/sources.list.d/backports.list E: The list of sources could not be read. E: Type 'sudo' is not known on line 1 in source list /etc/apt/sources.list.d/backports.list E: The list of sources could not be read. E: Type 'sudo' is not known on line 1 in source list /etc/apt/sources.list.d/backports.list E: The list of sources could not be read. Pending Updates: *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 6603 641/iobroker.js-con tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 6608 641/iobroker.js-con tcp 0 0 0.0.0.0:8081 0.0.0.0:* LISTEN 1001 8002 823/io.admin.0 tcp 0 0 0.0.0.0:8082 0.0.0.0:* LISTEN 1001 9252 1166/io.web.0 tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 24404 11944/cupsd tcp 0 0 0.0.0.0:3500 0.0.0.0:* LISTEN 1001 6802 933/io.sonos.0 tcp 0 0 0.0.0.0:1885 0.0.0.0:* LISTEN 1001 875 986/io.sonoff.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 27245 20223/sshd: /usr/sb tcp6 0 0 :::22 :::* LISTEN 0 27247 20223/sshd: /usr/sb udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 1017 1106/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 1018 1106/io.tuya.0 udp 0 0 0.0.0.0:60440 0.0.0.0:* 104 7587 495/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 8481 1183/io.wled.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 7585 495/avahi-daemon: r udp6 0 0 fe80::2ecf:67ff:fe9:546 :::* 0 31569 3697/NetworkManager *** Log File - Last 25 Lines *** E: Type 'sudo' is not known on line 1 in source list /etc/apt/sources.list.d/backports.list E: The list of sources could not be read. 2025-11-12 17:50:22.666 - info: meross.0 (1001) Can not get Data for Device 2007165239742090820048e1e92598aa: Error: Device has no data connection available 2025-11-12 17:50:22.666 - warn: meross.0 (1001) Can not get Data for Device 2007165239742090820048e1e92598aa: undefined 2025-11-12 17:51:23.110 - info: meross.0 (1001) Can not get Data for Device 2007165239742090820048e1e92598aa: Error: Device has no data connection available 2025-11-12 17:51:23.110 - warn: meross.0 (1001) Can not get Data for Device 2007165239742090820048e1e92598aa: undefined 2025-11-12 17:52:23.597 - info: meross.0 (1001) Can not get Data for Device 2007165239742090820048e1e92598aa: Error: Device has no data connection available 2025-11-12 17:52:23.597 - warn: meross.0 (1001) Can not get Data for Device 2007165239742090820048e1e92598aa: undefined 2025-11-12 17:53:24.079 - info: meross.0 (1001) Can not get Data for Device 2007165239742090820048e1e92598aa: Error: Device has no data connection available 2025-11-12 17:53:24.079 - warn: meross.0 (1001) Can not get Data for Device 2007165239742090820048e1e92598aa: undefined 2025-11-12 17:54:03.595 - info: tahoma.0 (1076) State value to set for "tahoma.0.devices.Außensensor_-2.states.netatmo:LastMessageDateTimeState" has to be type "number" but received type "string" 2025-11-12 17:54:03.595 - info: tahoma.0 (1076) State value to set for "tahoma.0.devices.Windmesser.states.core:WindDirectionState" has to be type "number" but received type "string" 2025-11-12 17:54:03.596 - info: tahoma.0 (1076) State value to set for "tahoma.0.devices.Windmesser-1.states.netatmo:LastMessageDateTimeState" has to be type "number" but received type "string" 2025-11-12 17:54:03.596 - info: tahoma.0 (1076) State value to set for "tahoma.0.devices.Regenmesser-1.states.netatmo:LastMessageDateTimeState" has to be type "number" but received type "string" 2025-11-12 17:54:24.489 - info: meross.0 (1001) Can not get Data for Device 2007165239742090820048e1e92598aa: Error: Device has no data connection available 2025-11-12 17:54:24.489 - warn: meross.0 (1001) Can not get Data for Device 2007165239742090820048e1e92598aa: undefined 2025-11-12 17:55:04.490 - warn: host.iobroker Could not check for new OS updates: Command failed: sudo apt list --upgradeable WARNING: apt does not have a stable CLI interface. Use with caution in scripts. E: Type 'sudo' is not known on line 1 in source list /etc/apt/sources.list.d/backports.list E: The list of sources could not be read.@13patrick37 die Datei ...
/etc/apt/sources.list.d/backports.list
... ist Grütze ...
bei meinem Proxmox LXC-Container x64 debian 12 gibt es die Datei gar nicht ..
Intel(R) Celeron(R) CPU N3000 @ 1.04GHz 8G RAM 480G SSD
Virtualization : unprivileged lxc container (debian 12 on Proxmox 8.4.14)
Linux pve 6.8.12-16-pve
6 GByte RAM für den Container
Fritzbox 6591 FW 8.03 (Vodafone Leih-Box)
Remote-Access über Wireguard der Fritzbox -
Hallo zusammen,
zur Zeit ist mal wieder der Wurm drin.
Ich habe erst die node.js aktuallisieren müssen, um den Zigbee Adapter zu updaten.
Seitdem sind alle Geräte weg und es erkannt den Stick nicht mehr.Zigbee Version 3.1.5
lsusb zeigt ihn mir an:
admin@iobroker:~ $ lsusb Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 1cf1:0030 Dresden Elektronik ZigBee gateway [ConBee II]Bei ls -la .. kommt allerdings kein Zugriff.
admin@iobroker:~ $ ls -la /dev/serial/by-id ls: cannot access '/dev/serial/by-id': No such file or directoryapt policy udev sagt bei mir:
admin@iobroker:~ $ apt policy udev E: Type 'sudo' is not known on line 1 in source list /etc/apt/sources.list.d/backports.list E: The list of sources could not be read. admin@iobroker:~ $Zum Abschluss noch iob diag
========== Start marking the full check here =========== ```bash Script v.2025-08-09 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 12 (bookworm) Static hostname: iobroker Icon name: computer Kernel: Linux 6.12.47+rpt-rpi-2712 Architecture: arm64 OS is similar to: Model : Raspberry Pi 5 Model B Rev 1.0 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 17:54:26 up 47 min, 3 users, load average: 0.99, 0.38, 0.29 CPU threads: 4 *** LIFE CYCLE STATUS *** Debian 'bookworm' is the current oldstable version. Please upgrade to the latest stable release 'trixie' in due time! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Wed 2025-11-12 17:54:26 CET Universal time: Wed 2025-11-12 16:54:26 UTC RTC time: Wed 2025-11-12 16:54:26 Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': admin HOME=/home/admin GROUPS=admin adm dialout cdrom sudo audio video plugdev games users input render netdev lpadmin gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Display-Manager: * lightdm.service - Light Display Manager Desktop: Session: tty *** MEMORY *** total used free shared buff/cache available Mem: 8.5G 2.4G 4.6G 5.2M 1.6G 6.1G Swap: 536M 0B 536M Total: 9.0G 2.4G 5.1G Active iob-Instances: 26 8063 M total memory 2248 M used memory 2233 M active memory 1107 M inactive memory 4358 M free memory 149 M buffer memory 1398 M swap cache 511 M total swap 0 M used swap 511 M free swap *** top - Table Of Processes *** top - 17:54:28 up 47 min, 3 users, load average: 1.00, 0.39, 0.29 Tasks: 193 total, 1 running, 192 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 0.0 sy, 0.0 ni,100.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 8063.1 total, 4357.2 free, 2250.0 used, 1548.8 buff/cache MiB Swap: 512.0 total, 512.0 free, 0.0 used. 5813.2 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * proc-sys-fs-binfmt_misc.mount loaded failed failed Arbitrary Executable File Formats File System * systemd-binfmt.service loaded failed failed Set Up Additional Binary Formats LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 2 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.9G 0 3.9G 0% /dev tmpfs tmpfs 807M 4.8M 802M 1% /run /dev/mmcblk0p2 ext4 58G 11G 45G 20% / tmpfs tmpfs 4.0G 32K 4.0G 1% /dev/shm tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock /dev/mmcblk0p1 vfat 510M 78M 433M 16% /boot/firmware tmpfs tmpfs 807M 176K 807M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Wed Nov 12 17:06:50 2025] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0 numa=fake=8 system_heap.max_order=0 iommu_dma_numa_policy=interleave smsc95xx.macaddr=2C:CF:67:93:F3:49 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=c36ce0f5-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [Wed Nov 12 17:06:51 2025] EXT4-fs (mmcblk0p2): mounted filesystem a36be96c-66be-4487-a7a6-0481bca99d89 ro with ordered data mode. Quota mode: none. [Wed Nov 12 17:06:54 2025] EXT4-fs (mmcblk0p2): re-mounted a36be96c-66be-4487-a7a6-0481bca99d89 r/w. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 2.2G /var/ 1.1G /var/cache/apt 1.1G /var/cache 971M /var/cache/apt/archives 411M /var/log Archived and active journals take up 409.2M in the file system. /opt/iobroker/backups: 25M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 938M /opt/iobroker/iobroker-data/ 826M /opt/iobroker/iobroker-data/files 617M /opt/iobroker/iobroker-data/files/javascript.admin 560M /opt/iobroker/iobroker-data/files/javascript.admin/static 558M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 38M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map 24M /opt/iobroker/iobroker-data/files/scenes.admin/static/js/main.c9369f6c.js.map 16M /opt/iobroker/iobroker-data/objects.jsonl 9.1M /opt/iobroker/iobroker-data/states.jsonl USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** ZigBee Settings *** HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/ttyACM0 Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v22.21.0 /usr/bin/node v22.21.0 /usr/bin/npm 10.9.4 /usr/bin/npx 10.9.4 /usr/bin/corepack 0.34.0 E: Type 'sudo' is not known on line 1 in source list /etc/apt/sources.list.d/backports.list E: The list of sources could not be read. Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: iobroker iobroker (version: 7.0.7, hostname: iobroker , alive, uptime: 2853) Core adapters versions js-controller: 7.0.7 admin: 7.7.19 javascript: 8.8.3 nodejs modules from github: 1 | +-- syno@3.0.0 (git+https://git@github.com/MeisterTR/syno.git#0104a973d33fe332aa6b1ab5be7fe8c57d3c68b0) Adapter State + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.alexa2.0 : alexa2 : iobroker - enabled + system.adapter.backitup.0 : backitup : iobroker - enabled + system.adapter.bshb.1 : bshb : iobroker - enabled system.adapter.cloud.0 : cloud : iobroker - disabled + system.adapter.device-reminder.0 : device-reminder : iobroker - enabled + system.adapter.discovery.0 : discovery : iobroker - enabled + system.adapter.homeconnect.0 : homeconnect : iobroker - enabled + system.adapter.hue.0 : hue : iobroker - enabled, port: 443 + system.adapter.hue.1 : hue : iobroker - enabled, port: 443 + system.adapter.hue.2 : hue : iobroker - enabled, port: 443 system.adapter.iot.0 : iot : iobroker - disabled + system.adapter.javascript.0 : javascript : iobroker - enabled + system.adapter.meross.0 : meross : iobroker - enabled + system.adapter.notification-manager.0 : notification-manager : iobroker - enabled + system.adapter.pushover.0 : pushover : iobroker - enabled + system.adapter.scenes.0 : scenes : iobroker - enabled + system.adapter.shuttercontrol.0 : shuttercontrol : iobroker - enabled + system.adapter.smartcontrol.0 : smartcontrol : iobroker - enabled + system.adapter.sonoff.0 : sonoff : iobroker - enabled, port: 1885, bind: 0.0.0.0 + system.adapter.sonos.0 : sonos : iobroker - enabled system.adapter.synology.0 : synology : iobroker - disabled, port: 5000 + system.adapter.tahoma.0 : tahoma : iobroker - enabled + system.adapter.tuya.0 : tuya : iobroker - enabled + system.adapter.viessmannapi.0 : viessmannapi : iobroker - enabled + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.wled.0 : wled : iobroker - enabled + system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: /dev/ttyACM0 system.adapter.zigbee2mqtt.0 : zigbee2mqtt : iobroker - disabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.hue.0 : hue : iobroker - enabled, port: 443 + system.adapter.hue.1 : hue : iobroker - enabled, port: 443 + system.adapter.hue.2 : hue : iobroker - enabled, port: 443 + system.adapter.sonoff.0 : sonoff : iobroker - enabled, port: 1885, bind: 0.0.0.0 + system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : iobroker - enabled, port: /dev/ttyACM0 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Adapters Used repository: stable Adapter "admin" : 7.7.19 , installed 7.7.19 Adapter "alexa2" : 3.27.4 , installed 3.27.4 Adapter "backitup" : 3.3.10 , installed 3.0.31 [Updatable] Adapter "bshb" : 0.5.0 , installed 0.3.0 [Updatable] Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "daikin" : 1.5.1 , installed 1.4.2 [Updatable] Adapter "device-reminder": 3.1.2 , installed 3.1.2 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "homeconnect" : 1.4.3 , installed 1.4.3 Adapter "hue" : 3.16.2 , installed 3.16.2 Adapter "iot" : 5.0.7 , installed 3.3.0 [Updatable] Adapter "javascript" : 8.9.2 , installed 8.8.3 [Updatable] Controller "js-controller": 7.0.7 , installed 7.0.7 Adapter "meross" : 1.17.0 , installed 1.17.0 Adapter "notification-manager": 1.3.0, installed 1.2.1 [Updatable] Adapter "pushover" : 4.1.0 , installed 4.1.0 Adapter "scenes" : 3.2.3 , installed 3.2.3 Adapter "shuttercontrol": 2.0.5 , installed 1.8.5 [Updatable] Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "smartcontrol" : 2.0.1 , installed 2.0.1 Adapter "socketio" : 6.7.1 , installed 6.6.1 [Updatable] Adapter "sonoff" : 3.2.1 , installed 3.1.2 [Updatable] Adapter "sonos" : 3.0.0 , installed 3.0.0 Adapter "synology" : 3.1.0 , installed 3.1.0 Adapter "tahoma" : 0.10.4 , installed 0.10.4 Adapter "tuya" : 3.16.0 , installed 3.16.0 Adapter "web" : 7.0.8 , installed 6.2.5 [Updatable] Adapter "wled" : 0.7.2 , installed 0.7.2 Adapter "ws" : 2.6.2 , installed 2.5.11 [Updatable] Adapter "zigbee" : 3.1.5 , installed 3.1.5 Adapter "zigbee2mqtt" : 3.0.9 , installed 3.0.9 Objects and States Please stand by - This may take a while Objects: 11202 States: 9574 *** OS-Repositories and Updates *** E: Type 'sudo' is not known on line 1 in source list /etc/apt/sources.list.d/backports.list E: The list of sources could not be read. E: Type 'sudo' is not known on line 1 in source list /etc/apt/sources.list.d/backports.list E: The list of sources could not be read. E: Type 'sudo' is not known on line 1 in source list /etc/apt/sources.list.d/backports.list E: The list of sources could not be read. Pending Updates: *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 6603 641/iobroker.js-con tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 6608 641/iobroker.js-con tcp 0 0 0.0.0.0:8081 0.0.0.0:* LISTEN 1001 8002 823/io.admin.0 tcp 0 0 0.0.0.0:8082 0.0.0.0:* LISTEN 1001 9252 1166/io.web.0 tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 24404 11944/cupsd tcp 0 0 0.0.0.0:3500 0.0.0.0:* LISTEN 1001 6802 933/io.sonos.0 tcp 0 0 0.0.0.0:1885 0.0.0.0:* LISTEN 1001 875 986/io.sonoff.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 27245 20223/sshd: /usr/sb tcp6 0 0 :::22 :::* LISTEN 0 27247 20223/sshd: /usr/sb udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 1017 1106/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 1018 1106/io.tuya.0 udp 0 0 0.0.0.0:60440 0.0.0.0:* 104 7587 495/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 1001 8481 1183/io.wled.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 7585 495/avahi-daemon: r udp6 0 0 fe80::2ecf:67ff:fe9:546 :::* 0 31569 3697/NetworkManager *** Log File - Last 25 Lines *** E: Type 'sudo' is not known on line 1 in source list /etc/apt/sources.list.d/backports.list E: The list of sources could not be read. 2025-11-12 17:50:22.666 - info: meross.0 (1001) Can not get Data for Device 2007165239742090820048e1e92598aa: Error: Device has no data connection available 2025-11-12 17:50:22.666 - warn: meross.0 (1001) Can not get Data for Device 2007165239742090820048e1e92598aa: undefined 2025-11-12 17:51:23.110 - info: meross.0 (1001) Can not get Data for Device 2007165239742090820048e1e92598aa: Error: Device has no data connection available 2025-11-12 17:51:23.110 - warn: meross.0 (1001) Can not get Data for Device 2007165239742090820048e1e92598aa: undefined 2025-11-12 17:52:23.597 - info: meross.0 (1001) Can not get Data for Device 2007165239742090820048e1e92598aa: Error: Device has no data connection available 2025-11-12 17:52:23.597 - warn: meross.0 (1001) Can not get Data for Device 2007165239742090820048e1e92598aa: undefined 2025-11-12 17:53:24.079 - info: meross.0 (1001) Can not get Data for Device 2007165239742090820048e1e92598aa: Error: Device has no data connection available 2025-11-12 17:53:24.079 - warn: meross.0 (1001) Can not get Data for Device 2007165239742090820048e1e92598aa: undefined 2025-11-12 17:54:03.595 - info: tahoma.0 (1076) State value to set for "tahoma.0.devices.Außensensor_-2.states.netatmo:LastMessageDateTimeState" has to be type "number" but received type "string" 2025-11-12 17:54:03.595 - info: tahoma.0 (1076) State value to set for "tahoma.0.devices.Windmesser.states.core:WindDirectionState" has to be type "number" but received type "string" 2025-11-12 17:54:03.596 - info: tahoma.0 (1076) State value to set for "tahoma.0.devices.Windmesser-1.states.netatmo:LastMessageDateTimeState" has to be type "number" but received type "string" 2025-11-12 17:54:03.596 - info: tahoma.0 (1076) State value to set for "tahoma.0.devices.Regenmesser-1.states.netatmo:LastMessageDateTimeState" has to be type "number" but received type "string" 2025-11-12 17:54:24.489 - info: meross.0 (1001) Can not get Data for Device 2007165239742090820048e1e92598aa: Error: Device has no data connection available 2025-11-12 17:54:24.489 - warn: meross.0 (1001) Can not get Data for Device 2007165239742090820048e1e92598aa: undefined 2025-11-12 17:55:04.490 - warn: host.iobroker Could not check for new OS updates: Command failed: sudo apt list --upgradeable WARNING: apt does not have a stable CLI interface. Use with caution in scripts. E: Type 'sudo' is not known on line 1 in source list /etc/apt/sources.list.d/backports.list E: The list of sources could not be read.@13patrick37 sagte in Zigbee Stick keine Verbindung/nach Update:
Debian 'bookworm' is the current oldstable version. Please upgrade to the latest stable release 'trixie' in due time!
Bring das in nächster Zeit auf den aktuellen Stand.
Display-Manager: * lightdm.service - Light Display Manager
Schalt das aus.
*** FAILED SERVICES ***
{1}
UNIT LOAD ACTIVE SUB DESCRIPTION
-
proc-sys-fs-binfmt_misc.mount loaded failed failed Arbitrary Executable File Formats File System
-
systemd-binfmt.service loaded failed failed Set Up Additional Binary Formats
Sollte auch nicht erscheinen. Schau die die Meldungen dazu an.
No Devices found 'by-id'
Steck den Stick nochmal neu..
Halt deine Adapter besser auf Stand.
-
-
@13patrick37 die Datei ...
/etc/apt/sources.list.d/backports.list
... ist Grütze ...
bei meinem Proxmox LXC-Container x64 debian 12 gibt es die Datei gar nicht ..
@martinp sagte in Zigbee Stick keine Verbindung/nach Update:
... ist Grütze ...
Ja, Backports vermeidet man auf einem Server.
-
@13patrick37 die Datei ...
/etc/apt/sources.list.d/backports.list
... ist Grütze ...
bei meinem Proxmox LXC-Container x64 debian 12 gibt es die Datei gar nicht ..
@martinp said in Zigbee Stick keine Verbindung/nach Update:
@13patrick37 die Datei ...
/etc/apt/sources.list.d/backports.list
... ist Grütze ...
bei meinem Proxmox LXC-Container x64 debian 12 gibt es die Datei gar nicht ..
Das hatte ich im Forum gelesen, da bei einigen ein Bug drin war. Wie entferne ich das wieder am geschicktesten?
@Thomas-Braun Stick habe ich schon mehrfach neu eingesteckt. Jetzt wird er wieder erkannt, aber Zigbee Adapter gibt trotzdem Fehlermeldung:Unable to obtain herdsman settings Starting zigbee-herdsman problem : failed to start adapter connection to firmware Failed to start Zigbee: no message given reading access rights for /dev/ttyACM0 read and write access available for /dev/ttyACM0 -
@martinp said in Zigbee Stick keine Verbindung/nach Update:
@13patrick37 die Datei ...
/etc/apt/sources.list.d/backports.list
... ist Grütze ...
bei meinem Proxmox LXC-Container x64 debian 12 gibt es die Datei gar nicht ..
Das hatte ich im Forum gelesen, da bei einigen ein Bug drin war. Wie entferne ich das wieder am geschicktesten?
@Thomas-Braun Stick habe ich schon mehrfach neu eingesteckt. Jetzt wird er wieder erkannt, aber Zigbee Adapter gibt trotzdem Fehlermeldung:Unable to obtain herdsman settings Starting zigbee-herdsman problem : failed to start adapter connection to firmware Failed to start Zigbee: no message given reading access rights for /dev/ttyACM0 read and write access available for /dev/ttyACM0@13patrick37 sagte in Zigbee Stick keine Verbindung/nach Update:
Wie entferne ich das wieder am geschicktesten?
Ich würde die Datei komplett löschen.
sudo rm /etc/apt/sources.list.d/backports.list -
@martinp said in Zigbee Stick keine Verbindung/nach Update:
@13patrick37 die Datei ...
/etc/apt/sources.list.d/backports.list
... ist Grütze ...
bei meinem Proxmox LXC-Container x64 debian 12 gibt es die Datei gar nicht ..
Das hatte ich im Forum gelesen, da bei einigen ein Bug drin war. Wie entferne ich das wieder am geschicktesten?
@Thomas-Braun Stick habe ich schon mehrfach neu eingesteckt. Jetzt wird er wieder erkannt, aber Zigbee Adapter gibt trotzdem Fehlermeldung:Unable to obtain herdsman settings Starting zigbee-herdsman problem : failed to start adapter connection to firmware Failed to start Zigbee: no message given reading access rights for /dev/ttyACM0 read and write access available for /dev/ttyACM0@13patrick37 sagte in Zigbee Stick keine Verbindung/nach Update:
Jetzt wird er wieder erkannt,
Und wie steht der jetzt 'by-id' drin?
-
@13patrick37 sagte in Zigbee Stick keine Verbindung/nach Update:
Jetzt wird er wieder erkannt,
Und wie steht der jetzt 'by-id' drin?
admin@iobroker:~ $ ls -la /dev/serial/by-id/ total 0 drwxr-xr-x 2 root root 60 Nov 12 18:07 . drwxr-xr-x 4 root root 80 Nov 12 18:07 .. lrwxrwxrwx 1 root root 13 Nov 12 18:07 usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2469458-if00 -> ../../ttyACM0Wie schalte ich das diesen Display Manager aus?
Display-Manager: * lightdm.service - Light Display Manager -
admin@iobroker:~ $ ls -la /dev/serial/by-id/ total 0 drwxr-xr-x 2 root root 60 Nov 12 18:07 . drwxr-xr-x 4 root root 80 Nov 12 18:07 .. lrwxrwxrwx 1 root root 13 Nov 12 18:07 usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2469458-if00 -> ../../ttyACM0Wie schalte ich das diesen Display Manager aus?
Display-Manager: * lightdm.service - Light Display Manager@13patrick37 sagte in Zigbee Stick keine Verbindung/nach Update:
Wie schalte ich das diesen Display Manager aus?
Indem du z. B. nur in multi-user bootest.
Geht persudo systemctl set-default multi-user.targetEdit: Typo
-
@13patrick37 sagte in Zigbee Stick keine Verbindung/nach Update:
Wie schalte ich das diesen Display Manager aus?
Indem du z. B. nur in multi-user bootest.
Geht persudo systemctl set-default multi-user.targetEdit: Typo
Da kommt:
admin@iobroker:~ $ sudo systemct set-default multi-user.target sudo: systemct: command not found -
Da kommt:
admin@iobroker:~ $ sudo systemct set-default multi-user.target sudo: systemct: command not found
Support us
831
Online32.4k
Benutzer81.5k
Themen1.3m
Beiträge