Jahresrückblick 2025 – unser neuer Blogbeitrag ist online! ✨

[ticaki]

@erich-1 sagte in js-controller updaten:

@erich-1 Gibt es eigentlich eine Möglichkeit, die VM einer Proxmox-Installation irgendwie ausserhalb zu sichern?

Ja, ich hab den Promox Backup Server (PBS) installiert und damit etwas "rumgespielt". Dann angefangen damit meine Backups zu sichern... Und etwas später ist mir dann die Idee gekommen meinen x64 hauptrechner mit dem PBS Image von einem kleinen USB-Stick zu booten, und das System auf einem großen USB-Stick zu installieren - den stecke ich jetzt alle paar Wochen in den Windowskiste boote von ihm und syncronisiere den mit meinem normalen PBS - das wird zwar im Notfall dann ein gefummel werden... Aber wenn mir das alles abraucht, kommt darauf dann auch nicht mehr an.

[saeft_2003]

@erich-1 sagte in js-controller updaten:

@erich-1 Gibt es eigentlich eine Möglichkeit, die VM einer Proxmox-Installation irgendwie ausserhalb zu sichern?

Bei tuxis bekommt man kostenlos 160 GB PBS kostenlos. Das läuft bei mir seit Monaten ohne Probleme.

[crunchip]

@erich-1 Möglichkeiten gibt es einige, jedoch ohne Grundlagenkenntnisse in Sachen Linux eher schwierig.

[ticaki]

@saeft_2003 sagte in js-controller updaten:

tuxis

Das gibts zur Zeit leider nicht für Neukunden. Sonst wäre ich auch dort. :)

[saeft_2003]

@ticaki

Oh ok dann war das mal so…

[ticaki]

@saeft_2003
Da steht das es wegen eines Bugs in PBS aktuell die kostenlose Version nicht gibt. Kann mal also auf dem Schirm behalten :)

[Erich 1]

@thomas-braun said in js-controller updaten:

@erich-1 sagte in js-controller updaten:

Außerdem gilt auch noch:

@homoran sagte in js-controller updaten:

Nein, ich bastle mir eine weitere VM mit dem aktuellen debian und setze den ioBroker darauf neu auf. Der alte läuft ja soweit wieder, dass ich da keine Eile habe...

[Kodo_sh]

Moin zusammen,

da ich leider auch nicht so der Linux crack bin, möchte ich mich bei der Frage von Erich mit einklinken.
Vor allem weil ich mir in der Verangenheit schonmal mein system geschrottet habe.

Wie update ich sicher auf die aktuelle JS?
Was habe ich bereits gemacht? Apt-get update&upgrade, iobroker fix

Würde mich sehr über eure unterstützung freuen.
Danke schon mal
Alex

Anbei mein Log

*** BASE SYSTEM ***
 Static hostname: iobroker
       Icon name: computer-desktop
         Chassis: desktop 🖥️
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.1.0-21-amd64
    Architecture: x86-64
 Hardware Vendor: Lenovo
  Hardware Model: ThinkCentre M92p
Firmware Version: 9SKT9CAUS
OS is similar to:

model name      : Intel(R) Core(TM) i5-3470T CPU @ 2.90GHz
Docker          : false
Virtualization  : none
Kernel          : x86_64
Userland        : 64 bit

Systemuptime and Load:
 08:58:22 up 370 days, 20:00,  2 users,  load average: 0.69, 0.57, 0.46
CPU threads: 4


*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'bookworm'!

*** TIME AND TIMEZONES ***
               Local time: Thu 2025-06-05 08:58:22 CEST
           Universal time: Thu 2025-06-05 06:58:22 UTC
                 RTC time: Thu 2025-06-05 06:58:22
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout cdrom floppy sudo audio dip video plugdev users netdev

User that is running 'js-controller':
js-controller is not running

A default user should be created! This user will be enabled to temporarily switch to root via 'sudo'!
A root login is not required in most Linux Distributions.
Run 'iobroker fix' or use the system tools to create a user.
*** DISPLAY-SERVER SETUP ***
Display-Server: false
Desktop:
Terminal:       tty

System is booting into 'graphical.target'. Usually a server is running in 'multi-user.target'. Please set BootTarget to 'multi-user.target' or run 'iobroker fix'

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            3.9G        443M        2.0G        204K        1.7G        3.4G
Swap:           1.0G        3.2M        1.0G
Total:          4.9G        446M        3.0G

Active iob-Instances:   1

         3706 M total memory
          423 M used memory
          924 M active memory
          511 M inactive memory
         1931 M free memory
          698 M buffer memory
          932 M swap cache
          974 M total swap
            3 M used swap
          971 M free swap

*** top - Table Of Processes  ***
top - 08:58:23 up 370 days, 20:00,  2 users,  load average: 0.69, 0.57, 0.46
Tasks: 115 total,   1 running, 114 sleeping,   0 stopped,   0 zombie
%Cpu(s):  0.0 us,  0.0 sy,  0.0 ni,100.0 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   3706.3 total,   1930.7 free,    424.7 used,   1630.9 buff/cache
MiB Swap:    975.0 total,    971.9 free,      3.1 used.   3281.6 avail Mem

*** FAILED SERVICES ***

  UNIT             LOAD   ACTIVE SUB    DESCRIPTION
* iobroker.service loaded failed failed ioBroker Server

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.
1 loaded units listed.


*** DMESG CRITICAL ERRORS ***
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.8G     0  1.8G   0% /dev
tmpfs          tmpfs     371M  700K  370M   1% /run
/dev/sda1      ext4      457G  7.8G  426G   2% /
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     5.0M     0  5.0M   0% /run/lock
tmpfs          tmpfs     371M     0  371M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Thu May 30 12:57:47 2024] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none.
[Thu May 30 12:57:49 2024] EXT4-fs (sda1): re-mounted. Quota mode: none.

Show mounted filesystems:
TARGET SOURCE    FSTYPE OPTIONS
/      /dev/sda1 ext4   rw,relatime,errors=remount-ro

Files in neuralgic directories:

/var:
903M    /var/
456M    /var/cache
449M    /var/cache/apt
373M    /var/cache/apt/archives
267M    /var/log

Hint: You are currently not seeing messages from other users and the system.
      Users in groups 'adm', 'systemd-journal' can see all messages.
      Pass -q to turn off this notice.
Archived and active journals take up 100.5M in the file system.

/opt/iobroker/backups:
139M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
951M    /opt/iobroker/iobroker-data/
882M    /opt/iobroker/iobroker-data/files
617M    /opt/iobroker/iobroker-data/files/javascript.admin
560M    /opt/iobroker/iobroker-data/files/javascript.admin/static
558M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js

The five largest files in iobroker-data are:
38M     /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map
24M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map
24M     /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js.map
11M     /opt/iobroker/iobroker-data/objects.jsonl
9.3M    /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

No Devices found 'by-id'

*** ZigBee Settings ***
Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


*** NodeJS-Installation ***

/usr/bin/nodejs         v18.19.0
/usr/bin/node           v18.19.0
/usr/bin/npm            9.2.0
/usr/bin/npx            9.2.0
corepack:       N/A
*** nodejs is NOT correctly installed ***

nodejs:
  Installed: 18.19.0+dfsg-6~deb12u2
  Candidate: 18.19.0+dfsg-6~deb12u2
  Version table:
 *** 18.19.0+dfsg-6~deb12u2 500
        500 http://deb.debian.org/debian bookworm/main amd64 Packages
        100 /var/lib/dpkg/status
     18.19.0+dfsg-6~deb12u1 500
        500 http://security.debian.org/debian-security bookworm-security/main amd64 Packages
     18.17.1-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x bookworm/main amd64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is not running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
iobroker            iobroker (version: 5.0.19, hostname: iobroker      , alive, uptime: 32038930)

Core adapters versions
js-controller:  5.0.19
admin:          7.6.17
javascript:     8.8.3

nodejs modules from github:     1
| +-- syno@3.0.0 (git+https://git@github.com/MeisterTR/syno.git#0104a973d33fe332aa6b1ab5be7fe8c57d3c68b0)

Adapter State
  system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.alexa2.0                 : alexa2                : iobroker                                 -  enabled
  system.adapter.backitup.0               : backitup              : iobroker                                 -  enabled
  system.adapter.discovery.0              : discovery             : iobroker                                 -  enabled
  system.adapter.energiefluss.0           : energiefluss          : iobroker                                 - disabled
  system.adapter.fb-checkpresence.0       : fb-checkpresence      : iobroker                                 -  enabled
  system.adapter.icons-material-png.0     : icons-material-png    : iobroker                                 - disabled
  system.adapter.icons-mfd-png.0          : icons-mfd-png         : iobroker                                 - disabled
  system.adapter.icons-mfd-svg.0          : icons-mfd-svg         : iobroker                                 - disabled
  system.adapter.influxdb.0               : influxdb              : iobroker                                 - disabled, port: 8086
  system.adapter.iot.0                    : iot                   : iobroker                                 -  enabled
  system.adapter.javascript.0             : javascript            : iobroker                                 -  enabled
  system.adapter.modbus.0                 : modbus                : iobroker                                 - disabled
  system.adapter.ping.0                   : ping                  : iobroker                                 - disabled
  system.adapter.shelly.0                 : shelly                : iobroker                                 -  enabled, port: 1889, bind: 0.0.0.0
  system.adapter.shelly.1                 : shelly                : iobroker                                 -  enabled, port: 1882, bind: 0.0.0.0
  system.adapter.sonoff.0                 : sonoff                : iobroker                                 -  enabled, port: 1883, bind: 0.0.0.0
  system.adapter.sprinklecontrol.0        : sprinklecontrol       : iobroker                                 - disabled
  system.adapter.synology.0               : synology              : iobroker                                 -  enabled, port: 5000
  system.adapter.vis-bars.0               : vis-bars              : iobroker                                 - disabled
  system.adapter.vis-canvas-gauges.0      : vis-canvas-gauges     : iobroker                                 - disabled
  system.adapter.vis-fancyswitch.0        : vis-fancyswitch       : iobroker                                 - disabled
  system.adapter.vis-history.0            : vis-history           : iobroker                                 - disabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : iobroker                                 - disabled
  system.adapter.vis-icontwo.0            : vis-icontwo           : iobroker                                 - disabled
  system.adapter.vis-inventwo.0           : vis-inventwo          : iobroker                                 -  enabled
  system.adapter.vis-jqui-mfd.0           : vis-jqui-mfd          : iobroker                                 - disabled
  system.adapter.vis-justgage.0           : vis-justgage          : iobroker                                 - disabled
  system.adapter.vis-material-advanced.0  : vis-material-advanced : iobroker                                 - disabled
  system.adapter.vis-metro.0              : vis-metro             : iobroker                                 - disabled
  system.adapter.vis-plumb.0              : vis-plumb             : iobroker                                 - disabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : iobroker                                 - disabled
  system.adapter.vis-weather.0            : vis-weather           : iobroker                                 - disabled
  system.adapter.vis.0                    : vis                   : iobroker                                 -  enabled
  system.adapter.web.0                    : web                   : iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
  system.adapter.worx.0                   : worx                  : iobroker                                 -  enabled

+ instance is alive

Enabled adapters with bindings
  system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.shelly.0                 : shelly                : iobroker                                 -  enabled, port: 1889, bind: 0.0.0.0
  system.adapter.shelly.1                 : shelly                : iobroker                                 -  enabled, port: 1882, bind: 0.0.0.0
  system.adapter.sonoff.0                 : sonoff                : iobroker                                 -  enabled, port: 1883, bind: 0.0.0.0
  system.adapter.synology.0               : synology              : iobroker                                 -  enabled, port: 5000
  system.adapter.web.0                    : web                   : iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Adapters
Used repository: stable
Adapter    "admin"        : 7.6.17   , installed 7.6.17
Adapter    "alexa2"       : 3.26.5   , installed 3.26.5
Adapter    "backitup"     : 3.2.2    , installed 3.0.31 [Updatable]
Adapter    "discovery"    : 5.0.0    , installed 5.0.0
Adapter    "energiefluss" : 3.6.2    , installed 3.6.2
Adapter    "fb-checkpresence": 1.3.1 , installed 1.3.1
Adapter    "icons-material-png": 0.1.0, installed 0.1.0
Adapter    "icons-mfd-png": 1.2.1    , installed 1.2.1
Adapter    "icons-mfd-svg": 1.2.0    , installed 1.2.0
Adapter    "influxdb"     : 4.0.2    , installed 4.0.2
Adapter    "iot"          : 3.3.0    , installed 3.3.0
Adapter    "javascript"   : 8.9.2    , installed 8.8.3  [Updatable]
Controller "js-controller": 7.0.6    , installed 5.0.19 [Updatable]
Adapter    "modbus"       : 6.3.2    , installed 6.3.2
Adapter    "ping"         : 1.6.2    , installed 1.6.2
Adapter    "shelly"       : 9.5.1    , installed 8.5.1  [Updatable]
Adapter    "simple-api"   : 2.8.0    , installed 2.8.0
Adapter    "socketio"     : 6.7.1    , installed 6.7.1
Adapter    "sonoff"       : 3.1.2    , installed 3.1.2
Adapter    "sprinklecontrol": 0.2.13 , installed 0.2.13
Adapter    "synology"     : 3.1.0    , installed 3.1.0
Adapter    "vis"          : 1.5.6    , installed 1.5.6
Adapter    "vis-bars"     : 0.1.4    , installed 0.1.4
Adapter    "vis-canvas-gauges": 1.0.1, installed 1.0.1
Adapter    "vis-fancyswitch": 1.1.0  , installed 1.1.0
Adapter    "vis-history"  : 1.0.0    , installed 1.0.0
Adapter    "vis-hqwidgets": 1.5.1    , installed 1.5.1
Adapter    "vis-icontwo"  : 1.11.0   , installed 1.11.0
Adapter    "vis-inventwo" : 3.3.5    , installed 3.3.4  [Updatable]
Adapter    "vis-jqui-mfd" : 1.1.1    , installed 1.1.1
Adapter    "vis-justgage" : 2.1.7    , installed 2.1.7
Adapter    "vis-material-advanced": 1.7.4, installed 1.7.4
Adapter    "vis-metro"    : 1.2.0    , installed 1.2.0
Adapter    "vis-plumb"    : 1.0.2    , installed 1.0.2
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "vis-weather"  : 2.5.11   , installed 2.5.9  [Updatable]
Adapter    "web"          : 7.0.8    , installed 6.2.5  [Updatable]
Adapter    "worx"         : 3.2.0    , installed 3.1.1  [Updatable]
Adapter    "ws"           : 2.6.2    , installed 2.6.2

Objects and States
Please stand by - This may take a while
Objects:        9167
States:         7645

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian bookworm-updates InRelease
Hit:3 http://security.debian.org/debian-security bookworm-security InRelease
Hit:4 https://deb.nodesource.com/node_18.x bookworm InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          14796      1/systemd
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          137652652  694306/sshd: /usr/s
tcp6       0      0 :::111                  :::*                    LISTEN      0          14798      1/systemd
tcp6       0      0 :::22                   :::*                    LISTEN      0          137652654  694306/sshd: /usr/s
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          17515      401/dhclient
udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          14797      1/systemd
udp6       0      0 :::111                  :::*                                0          14799      1/systemd

*** Log File - Last 25 Lines ***

2025-06-05 08:56:25.411  - info: host.iobroker instance system.adapter.worx.0 terminated with code null ()
2025-06-05 08:56:25.411  - info: host.iobroker All instances are stopped.
2025-06-05 08:56:25.413  - error: host.iobroker Cannot find view "system" for search "instance" : Connection is closed.
2025-06-05 08:56:25.416  - error: host.iobroker Caught by controller[1]: This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). The promise rejected with the reason:
2025-06-05 08:56:25.416  - error: host.iobroker Caught by controller[1]: Error: DB closed
2025-06-05 08:56:25.416  - error: host.iobroker Caught by controller[1]:     at close (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:184:25)
2025-06-05 08:56:25.416  - error: host.iobroker Caught by controller[1]:     at Socket.<anonymous> (/opt/iobroker/node_modules/ioredis/built/redis/event_handler.js:151:20)
2025-06-05 08:56:25.416  - error: host.iobroker Caught by controller[1]:     at Object.onceWrapper (node:events:632:26)
2025-06-05 08:56:25.416  - error: host.iobroker Caught by controller[1]:     at Socket.emit (node:events:517:28)
2025-06-05 08:56:25.416  - error: host.iobroker Caught by controller[1]:     at Socket.emit (node:domain:489:12)
2025-06-05 08:56:25.417  - error: host.iobroker Caught by controller[1]:     at TCP.<anonymous> (node:net:351:12)
2025-06-05 08:56:25.417  - warn: host.iobroker instance system.adapter.shelly.0 terminated due to SIGTERM
2025-06-05 08:56:25.417  - info: host.iobroker instance system.adapter.shelly.0 terminated with code null ()
2025-06-05 08:56:25.417  - info: host.iobroker All instances are stopped.
2025-06-05 08:56:25.978  - error: host.iobroker Cannot find view "system" for search "instance" : Connection is closed.
2025-06-05 08:56:25.978  - info: host.iobroker instance system.adapter.javascript.0 terminated with code 0 (NO_ERROR)
2025-06-05 08:56:25.979  - info: host.iobroker All instances are stopped.
2025-06-05 08:56:25.983  - error: host.iobroker Cannot find view "system" for search "instance" : Connection is closed.
2025-06-05 08:56:25.984  - info: host.iobroker instance system.adapter.shelly.1 terminated with code 0 (NO_ERROR)
2025-06-05 08:56:25.984  - info: host.iobroker All instances are stopped.
2025-06-05 08:56:26.083  - error: host.iobroker Cannot find view "system" for search "instance" : Connection is closed.
2025-06-05 08:56:26.084  - warn: host.iobroker instance system.adapter.alexa2.0 terminated due to SIGTERM
2025-06-05 08:56:26.084  - info: host.iobroker instance system.adapter.alexa2.0 terminated with code null ()
2025-06-05 08:56:26.084  - info: host.iobroker All instances are stopped.
2025-06-05 08:56:26.214  - info: host.iobroker terminated

============ Mark until here for C&P =============

iob diag has finished.

[Thomas Braun]

@kodo_sh sagte in js-controller updaten:

A default user should be created! This user will be enabled to temporarily switch to root via 'sudo'! A root login is not required in most Linux Distributions. Run 'iobroker fix' or use the system tools to create a user.

Solltest du tun. Also:

iob stop
iob fix

Dabei kannst du auch gleich

System is booting into 'graphical.target'. Usually a server is running in 'multi-user.target'. Please set BootTarget to 'multi-user.target' or run 'iobroker fix'

sowie

Hint: You are currently not seeing messages from other users and the system.
Users in groups 'adm', 'systemd-journal' can see all messages.

dann korrigieren.

Systemuptime and Load
08:58:22 up 370 days, 20:00, 2 users, load average: 0.69, 0.57, 0.46

Da mit Sicherheit Kernelupdates usw. bei den Updates dabei waren:

sudo reboot

*** nodejs is NOT correctly installed ***

Mach das sauber:

iob nodejs-update

Und erst wenn Kiste dann robust aufgestellt ist:

iob stop
iob update
iob upgrade self
iob upgrade all 
iob start

Fertig.

[Kodo_sh]

@thomas-braun Super vielen lieben dank für die schnelle info.
Mein system läuft wieder und ist up2date .

========== Start marking the full check here ===========

```bash
Script v.2025-03-08

*** BASE SYSTEM ***
 Static hostname: iobroker
       Icon name: computer-desktop
         Chassis: desktop 🖥️
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.1.0-21-amd64
    Architecture: x86-64
 Hardware Vendor: Lenovo
  Hardware Model: ThinkCentre M92p
Firmware Version: 9SKT9CAUS
OS is similar to:

model name      : Intel(R) Core(TM) i5-3470T CPU @ 2.90GHz
Docker          : false
Virtualization  : none
Kernel          : x86_64
Userland        : 64 bit

Systemuptime and Load:
 10:03:26 up 3 min,  2 users,  load average: 0.65, 0.62, 0.27
CPU threads: 4


*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'bookworm'!

*** TIME AND TIMEZONES ***
               Local time: Thu 2025-06-05 10:03:26 CEST
           Universal time: Thu 2025-06-05 08:03:26 UTC
                 RTC time: Thu 2025-06-05 08:03:27
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout cdrom floppy sudo audio dip video plugdev users netdev

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout cdrom floppy sudo audio dip video plugdev users netdev

A default user should be created! This user will be enabled to temporarily switch to root via 'sudo'!
A root login is not required in most Linux Distributions.
Run 'iobroker fix' or use the system tools to create a user.
*** DISPLAY-SERVER SETUP ***
Display-Server: false
Desktop:
Terminal:       tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            3.9G        1.4G        2.3G        733K        387M        2.5G
Swap:           1.0G          0B        1.0G
Total:          4.9G        1.4G        3.3G

Active iob-Instances:   16

         3706 M total memory
         1356 M used memory
          139 M active memory
         1208 M inactive memory
         2196 M free memory
           40 M buffer memory
          329 M swap cache
          974 M total swap
            0 M used swap
          974 M free swap

*** top - Table Of Processes  ***
top - 10:03:27 up 3 min,  2 users,  load average: 0.65, 0.62, 0.27
Tasks: 143 total,   1 running, 142 sleeping,   0 stopped,   0 zombie
%Cpu(s):  0.0 us,  0.0 sy,  0.0 ni, 77.8 id, 22.2 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   3706.3 total,   2195.9 free,   1357.5 used,    370.5 buff/cache
MiB Swap:    975.0 total,    975.0 free,      0.0 used.   2348.8 avail Mem

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.


*** DMESG CRITICAL ERRORS ***
[sudo] password for iobroker:
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.8G     0  1.8G   0% /dev
tmpfs          tmpfs     371M  696K  370M   1% /run
/dev/sda1      ext4      457G  6.7G  427G   2% /
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     5.0M     0  5.0M   0% /run/lock
tmpfs          tmpfs     371M     0  371M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Thu Jun  5 10:00:09 2025] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none.
[Thu Jun  5 10:00:12 2025] EXT4-fs (sda1): re-mounted. Quota mode: none.

Show mounted filesystems:
TARGET SOURCE    FSTYPE OPTIONS
/      /dev/sda1 ext4   rw,relatime,errors=remount-ro

Files in neuralgic directories:

/var:
937M    /var/
487M    /var/cache
480M    /var/cache/apt
403M    /var/cache/apt/archives
275M    /var/log

Hint: You are currently not seeing messages from other users and the system.
      Users in groups 'adm', 'systemd-journal' can see all messages.
      Pass -q to turn off this notice.
Archived and active journals take up 100.5M in the file system.

/opt/iobroker/backups:
161M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
339M    /opt/iobroker/iobroker-data/
265M    /opt/iobroker/iobroker-data/files
57M     /opt/iobroker/iobroker-data/backup-objects
48M     /opt/iobroker/iobroker-data/files/iot.admin
47M     /opt/iobroker/iobroker-data/files/iot.admin/static/js

The five largest files in iobroker-data are:
38M     /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map
24M     /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js.map
12M     /opt/iobroker/iobroker-data/objects.jsonl
9.3M    /opt/iobroker/iobroker-data/files/modbus.admin/static/js/main.6a71b34c.js
8.8M    /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

No Devices found 'by-id'

*** ZigBee Settings ***
Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


*** NodeJS-Installation ***

/usr/bin/nodejs         v20.19.2
/usr/bin/node           v20.19.2
/usr/bin/npm            10.8.2
/usr/bin/npx            10.8.2
/usr/bin/corepack       0.31.0

nodejs:
  Installed: 20.19.2-1nodesource1
  Candidate: 20.19.2-1nodesource1
  Version table:
 *** 20.19.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
        100 /var/lib/dpkg/status
     20.19.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.18.3-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.12.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.12.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.11.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.8.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.6.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.3.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     18.19.0+dfsg-6~deb12u2 500
        500 http://deb.debian.org/debian bookworm/main amd64 Packages
     18.19.0+dfsg-6~deb12u1 500
        500 http://security.debian.org/debian-security bookworm-security/main amd64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
iobroker            iobroker (version: 7.0.6, hostname: iobroker      , alive, uptime: 219)

Core adapters versions
js-controller:  7.0.6
admin:          7.6.17
javascript:     8.9.2

nodejs modules from github:     1
| +-- syno@3.0.0 (git+https://git@github.com/MeisterTR/syno.git#0104a973d33fe332aa6b1ab5be7fe8c57d3c68b0)

Adapter State
+ system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : iobroker                                 -  enabled
+ system.adapter.backitup.0               : backitup              : iobroker                                 -  enabled
+ system.adapter.discovery.0              : discovery             : iobroker                                 -  enabled
  system.adapter.energiefluss.0           : energiefluss          : iobroker                                 - disabled
+ system.adapter.fb-checkpresence.0       : fb-checkpresence      : iobroker                                 -  enabled
  system.adapter.icons-material-png.0     : icons-material-png    : iobroker                                 - disabled
  system.adapter.icons-mfd-png.0          : icons-mfd-png         : iobroker                                 - disabled
  system.adapter.icons-mfd-svg.0          : icons-mfd-svg         : iobroker                                 - disabled
+ system.adapter.iot.0                    : iot                   : iobroker                                 -  enabled
+ system.adapter.javascript.0             : javascript            : iobroker                                 -  enabled
+ system.adapter.modbus.0                 : modbus                : iobroker                                 -  enabled
  system.adapter.ping.0                   : ping                  : iobroker                                 - disabled
+ system.adapter.shelly.0                 : shelly                : iobroker                                 -  enabled, port: 1889, bind: 0.0.0.0
+ system.adapter.shelly.1                 : shelly                : iobroker                                 -  enabled, port: 1882, bind: 0.0.0.0
  system.adapter.solarmanpv.0             : solarmanpv            : iobroker                                 - disabled
+ system.adapter.sonoff.0                 : sonoff                : iobroker                                 -  enabled, port: 1883, bind: 0.0.0.0
  system.adapter.sprinklecontrol.0        : sprinklecontrol       : iobroker                                 - disabled
+ system.adapter.synology.0               : synology              : iobroker                                 -  enabled, port: 5000
  system.adapter.vis-bars.0               : vis-bars              : iobroker                                 - disabled
  system.adapter.vis-canvas-gauges.0      : vis-canvas-gauges     : iobroker                                 - disabled
  system.adapter.vis-fancyswitch.0        : vis-fancyswitch       : iobroker                                 - disabled
  system.adapter.vis-history.0            : vis-history           : iobroker                                 - disabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : iobroker                                 - disabled
  system.adapter.vis-icontwo.0            : vis-icontwo           : iobroker                                 - disabled
+ system.adapter.vis-inventwo.0           : vis-inventwo          : iobroker                                 -  enabled
  system.adapter.vis-jqui-mfd.0           : vis-jqui-mfd          : iobroker                                 - disabled
  system.adapter.vis-justgage.0           : vis-justgage          : iobroker                                 - disabled
  system.adapter.vis-material-advanced.0  : vis-material-advanced : iobroker                                 - disabled
  system.adapter.vis-metro.0              : vis-metro             : iobroker                                 - disabled
  system.adapter.vis-plumb.0              : vis-plumb             : iobroker                                 - disabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : iobroker                                 - disabled
  system.adapter.vis-weather.0            : vis-weather           : iobroker                                 - disabled
  system.adapter.vis.0                    : vis                   : iobroker                                 -  enabled
+ system.adapter.web.0                    : web                   : iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.worx.0                   : worx                  : iobroker                                 -  enabled

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.shelly.0                 : shelly                : iobroker                                 -  enabled, port: 1889, bind: 0.0.0.0
+ system.adapter.shelly.1                 : shelly                : iobroker                                 -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.sonoff.0                 : sonoff                : iobroker                                 -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.synology.0               : synology              : iobroker                                 -  enabled, port: 5000
+ system.adapter.web.0                    : web                   : iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): stable
Upgrade policy: none

Installed ioBroker-Adapters
Used repository: stable
Adapter    "admin"        : 7.6.17   , installed 7.6.17
Adapter    "alexa2"       : 3.26.5   , installed 3.26.5
Adapter    "backitup"     : 3.2.2    , installed 3.2.2
Adapter    "discovery"    : 5.0.0    , installed 5.0.0
Adapter    "energiefluss" : 3.6.2    , installed 3.6.2
Adapter    "fb-checkpresence": 1.3.1 , installed 1.3.1
Adapter    "icons-material-png": 0.1.0, installed 0.1.0
Adapter    "icons-mfd-png": 1.2.1    , installed 1.2.1
Adapter    "icons-mfd-svg": 1.2.0    , installed 1.2.0
Adapter    "iot"          : 3.3.0    , installed 3.3.0
Adapter    "javascript"   : 8.9.2    , installed 8.9.2
Controller "js-controller": 7.0.6    , installed 7.0.6
Adapter    "modbus"       : 6.3.2    , installed 6.3.2
Adapter    "ping"         : 1.6.2    , installed 1.6.2
Adapter    "shelly"       : 9.5.1    , installed 9.5.1
Adapter    "socketio"     : 6.7.1    , installed 6.7.1
Adapter    "solarmanpv"   : 0.7.1    , installed 0.7.1
Adapter    "sonoff"       : 3.1.2    , installed 3.1.2
Adapter    "sprinklecontrol": 0.2.13 , installed 0.2.13
Adapter    "synology"     : 3.1.0    , installed 3.1.0
Adapter    "vis"          : 1.5.6    , installed 1.5.6
Adapter    "vis-bars"     : 0.1.4    , installed 0.1.4
Adapter    "vis-canvas-gauges": 1.0.1, installed 1.0.1
Adapter    "vis-fancyswitch": 1.1.0  , installed 1.1.0
Adapter    "vis-history"  : 1.0.0    , installed 1.0.0
Adapter    "vis-hqwidgets": 1.5.1    , installed 1.5.1
Adapter    "vis-icontwo"  : 1.11.0   , installed 1.11.0
Adapter    "vis-inventwo" : 3.3.5    , installed 3.3.5
Adapter    "vis-jqui-mfd" : 1.1.1    , installed 1.1.1
Adapter    "vis-justgage" : 2.1.7    , installed 2.1.7
Adapter    "vis-material-advanced": 1.7.4, installed 1.7.4
Adapter    "vis-metro"    : 1.2.0    , installed 1.2.0
Adapter    "vis-plumb"    : 1.0.2    , installed 1.0.2
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "vis-weather"  : 2.5.11   , installed 2.5.11
Adapter    "web"          : 7.0.8    , installed 7.0.8
Adapter    "worx"         : 3.2.0    , installed 3.2.0
Adapter    "ws"           : 2.6.2    , installed 2.6.2

Objects and States
Please stand by - This may take a while
Objects:        9216
States:         7780

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian bookworm-updates InRelease
Hit:3 http://security.debian.org/debian-security bookworm-security InRelease
Hit:4 https://deb.nodesource.com/node_20.x nodistro InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1000       18063      490/iobroker.js-con
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1000       18480      490/iobroker.js-con
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          15218      1/init
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          17997      498/sshd: /usr/sbin
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1000       18699      737/io.sonoff.0
tcp        0      0 0.0.0.0:1882            0.0.0.0:*               LISTEN      1000       17156      784/io.shelly.1
tcp6       0      0 :::111                  :::*                    LISTEN      0          15220      1/init
tcp6       0      0 :::22                   :::*                    LISTEN      0          17999      498/sshd: /usr/sbin
tcp6       0      0 :::8081                 :::*                    LISTEN      1000       18502      566/io.admin.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1000       18876      906/io.web.0
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          17947      384/dhclient
udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          15219      1/init
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1000       18277      705/io.shelly.0
udp6       0      0 :::111                  :::*                                0          15221      1/init

*** Log File - Last 25 Lines ***

2025-06-05 10:03:36.628  - info: shelly.0 (705) [authEnabled] 192.168.178.25 (shellyrgbw2 / shellyrgbw2-AE7B3F / SHRGBW2#AE7B3F#1): This device is not protected via restricted login (see adapter documentation for details)
2025-06-05 10:03:40.912  - info: shelly.0 (705) [authEnabled] 192.168.178.74 (shellydimmer2 / shellydimmer2-409151585823 / SHDM-2#409151585823#1): This device is not protected via restricted login (see adapter documentation for details)
2025-06-05 10:03:41.664  - info: shelly.0 (705) [authEnabled] 192.168.178.42 (shellyix3 / shellyix3-483FDA8D44F7 / SHIX3-1#483FDA8D44F7#1): This device is not protected via restricted login (see adapter documentation for details)
2025-06-05 10:03:50.539  - info: shelly.0 (705) [authEnabled] 192.168.178.84 (shellyuni / shellyuni-C8C9A31B3C7A / SHUNI-1#C8C9A31B3C7A#1): This device is not protected via restricted login (see adapter documentation for details)
2025-06-05 10:03:50.853  - info: shelly.0 (705) [authEnabled] 192.168.178.46 (shellyplug-s / shellyplug-s-C18521 / SHPLG-S#C18521#1): This device is not protected via restricted login (see adapter documentation for details)
2025-06-05 10:03:51.922  - info: shelly.0 (705) [authEnabled] 192.168.178.25 (shellyrgbw2 / shellyrgbw2-AE7B3F / SHRGBW2#AE7B3F#1): This device is not protected via restricted login (see adapter documentation for details)
2025-06-05 10:03:56.067  - info: shelly.0 (705) [authEnabled] 192.168.178.74 (shellydimmer2 / shellydimmer2-409151585823 / SHDM-2#409151585823#1): This device is not protected via restricted login (see adapter documentation for details)
2025-06-05 10:03:56.836  - info: shelly.0 (705) [authEnabled] 192.168.178.42 (shellyix3 / shellyix3-483FDA8D44F7 / SHIX3-1#483FDA8D44F7#1): This device is not protected via restricted login (see adapter documentation for details)
2025-06-05 10:04:06.259  - info: shelly.0 (705) [authEnabled] 192.168.178.46 (shellyplug-s / shellyplug-s-C18521 / SHPLG-S#C18521#1): This device is not protected via restricted login (see adapter documentation for details)
2025-06-05 10:04:06.644  - info: shelly.0 (705) [authEnabled] 192.168.178.84 (shellyuni / shellyuni-C8C9A31B3C7A / SHUNI-1#C8C9A31B3C7A#1): This device is not protected via restricted login (see adapter documentation for details)
2025-06-05 10:04:07.217  - info: shelly.0 (705) [authEnabled] 192.168.178.25 (shellyrgbw2 / shellyrgbw2-AE7B3F / SHRGBW2#AE7B3F#1): This device is not protected via restricted login (see adapter documentation for details)
2025-06-05 10:04:11.229  - info: shelly.0 (705) [authEnabled] 192.168.178.74 (shellydimmer2 / shellydimmer2-409151585823 / SHDM-2#409151585823#1): This device is not protected via restricted login (see adapter documentation for details)
2025-06-05 10:04:12.072  - info: shelly.0 (705) [authEnabled] 192.168.178.42 (shellyix3 / shellyix3-483FDA8D44F7 / SHIX3-1#483FDA8D44F7#1): This device is not protected via restricted login (see adapter documentation for details)
2025-06-05 10:04:14.341  - info: modbus.0 (690) Connected to slave 192.168.178.200
2025-06-05 10:04:19.541  - warn: modbus.0 (690) [DevID_1] Poll error count: 4 code: "App Timeout"
2025-06-05 10:04:21.054  - warn: modbus.0 (690) Error: undefined
2025-06-05 10:04:21.055  - error: modbus.0 (690) Request timed out.
2025-06-05 10:04:21.055  - error: modbus.0 (690) Client in error state.
2025-06-05 10:04:21.521  - info: shelly.0 (705) [authEnabled] 192.168.178.46 (shellyplug-s / shellyplug-s-C18521 / SHPLG-S#C18521#1): This device is not protected via restricted login (see adapter documentation for details)
2025-06-05 10:04:22.056  - info: modbus.0 (690) Disconnected from slave 192.168.178.200
2025-06-05 10:04:22.153  - info: shelly.0 (705) [authEnabled] 192.168.178.84 (shellyuni / shellyuni-C8C9A31B3C7A / SHUNI-1#C8C9A31B3C7A#1): This device is not protected via restricted login (see adapter documentation for details)
2025-06-05 10:04:22.532  - info: shelly.0 (705) [authEnabled] 192.168.178.25 (shellyrgbw2 / shellyrgbw2-AE7B3F / SHRGBW2#AE7B3F#1): This device is not protected via restricted login (see adapter documentation for details)
2025-06-05 10:04:23.803  - debug: alexa2.0 (666) Alexa-Remote HTTP2-PUSH: Send Ping
2025-06-05 10:04:26.372  - info: shelly.0 (705) [authEnabled] 192.168.178.74 (shellydimmer2 / shellydimmer2-409151585823 / SHDM-2#409151585823#1): This device is not protected via restricted login (see adapter documentation for details)
2025-06-05 10:04:27.304  - info: shelly.0 (705) [authEnabled] 192.168.178.42 (shellyix3 / shellyix3-483FDA8D44F7 / SHIX3-1#483FDA8D44F7#1): This device is not protected via restricted login (see adapter documentation for details)

============ Mark until here for C&P =============

iob diag has finished.

[Thomas Braun]

@kodo_sh sagte in js-controller updaten:

Mein system läuft wieder und ist up2date .

Naja...

Einen User abseits von 'iobroker' solltest du anlegen. Hast du keinen schönen Vornamen? Oder halt den Nick im Forum oder sonst was gescheites...
Dann wären auch diese beiden Meldungen weg:

A default user should be created! This user will be enabled to temporarily switch to root via 'sudo'!

A root login is not required in most Linux Distributions.

Hint: You are currently not seeing messages from other users and the system.
Users in groups 'adm', 'systemd-journal' can see all messages.

Davon abgesehen steht das System aber nun gut da.
Halte das ganze Ding regelmäßiger auf Stand.

[Kodo_sh]

@thomas-braun
Jetzt auch erledigt 😌 nenne ich einfach "updater"

Tja wenn alles läuft vergisst man das so gerne.
Habe nun einen Wiederholungstermin einmal im Monat gesetzt;

[Codierknecht]

@kodo_sh
Der ist ja nicht nur für Updates da, sondern für alles was man so in der Shell treibt.
Ob der Name da besonders geschickt gewählt ist? Ist aber reine Kosmetik.

[Thomas Braun]

@codierknecht sagte in js-controller updaten:

Ob der Name da besonders geschickt gewählt ist? Ist aber reine Kosmetik.

Jedenfalls besser als 'root', 'admin', 'pi' oder 'iobroker'.
Wobei halt ein individueller Name immer besser ist. Gegen die gängigen usernames kannst du ja auch leichter Wörterbuch-Attacken fahren. Weswegen z. B. RaspberryOS seit geraumer Zeit einen vom username 'pi' abweichenden user bei einer Neuinstallation vorsieht.