UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[Jens G.]

@peterfido Wo genau denn anpassen, oder wie erzeugt man den passenden converter?
Habe nur ki generiert sowas hier bekommen:

js
const fz = require('zigbee-herdsman-converters/converters/fromZigbee');
const tz = require('zigbee-herdsman-converters/converters/toZigbee');
const exposes = require('zigbee-herdsman-converters/lib/exposes');
const e = exposes.presets;

module.exports = [
  {
    zigbeeModel: ['ZBColorLightBulb'], // Anpassen an das tatsächliche Modell
    model: 'ZBColorLightBulb',
    vendor: 'Espressif',
    description: 'ESP32-C6 RGB LED',
    fromZigbee: [fz.on_off, fz.brightness, fz.color_colortemp, fz.color_xy], // je nach Firmware
    toZigbee: [tz.on_off, tz.brightness, tz.color_colortemp, tz.color_xy],
    exposes: [
      e.light_brightness_colorxy(), // Ermöglicht Helligkeit und Farbe
    ],
  },
];

Ist das so sinnvoll?

[Jens G.]

So wieder eine Runde weiter, siehe Bild

Habe einen Minimal Converter erstellt

[Asgothian]

@jens-g zumindest geht der Konverter. Ist das der oben gepostete >

A.

[Jens G.]

@asgothian Nein es ist dieser hier:

module.exports = [
    {
        fingerprint: [
            {modelID: 'ZBColorLightBulb', manufacturerName: 'Espressif'},
        ],
        model: 'ZBColorLightBulb',
        vendor: 'Espressif',
        description: 'ESP32-C6 RGB LED',
        fromZigbee: [],
        toZigbee: [],
        exposes: [],

];

[Asgothian]

@jens-g Meine Empfehlung:

• Aktualisieren auf die aktuelle Latest version 3.0.1 (oder aktuelle Github Version) Wichtig: Diesen Thread berücksichtigen

• den Converter anpassen:

import {light} from "zigbee-herdsman-converters/lib/modernExtend";

module.exports = [
{
    zigbeeModel: ['ZBColorLightBulb'], // Anpassen an das tatsächliche Modell
    model: 'ZBColorLightBulb',
    vendor: 'Espressif',
    description: 'ESP32-C6 RGB LED',
    extend: [light({colorTemp: {range: [150, 500]}, color: true})],}
];

Starten, und schauen was an Fehlermeldungen kommt.

Ohne das Update auf 3.0.1 wirst du den Pfad auf

import {light} from "zigbee-herdsman-converters/dist/lib/modernExtend";

anpassen müssen - allerdings muss diese Anpassung dann beim Wechsel auf die 3.x version rückgängig gemacht werden.

A.

[Jens G.]

@asgothian Ok ist es tatsächlich sicher auf Version 3 oder sollte ich bessern bei 2.0.5 bleiben?

[Asgothian]

@jens-g die 3.0.1 im Latest ist schon sehr stabil. Aber das musst du letztendlich selber wissen

A.

[Jens G.]

@asgothian So neue Version neues Problem:

Unable to apply converter from module: /opt/iobroker/iobroker-data/zigbee_0/esp32_c6_rgb.js - the code does not run: TypeError: light is not a function

[Asgothian]

@jens-g gibt es vorher weitere Meldungen, insbesondere wegen nicht gefundener Dateien ?

[Jens G.]

@asgothian Nein nur dieser Fehler

[Asgothian]

@jens-g Ich hab nach Meldungen gefragt, nicht nach Fehlern.

Es können warn- oder Info Meldungen sein

Bitte mal alle Meldungen vom Start des Adapters bis zum Fehler posten.

A.

[Homoran]

@jens-g bitte keine Schnipsel vom Log

Das Log besteht nicht ohne Grund aus timestamp, meldender Instanz, Schweregrad und eigentlicher Meldung.
Bitte immer alles zeigen, incl. etwas Kontext.
oft meldet auch der Controller oder der admin oder andere verbundene Instanzen weitere Informationen

[Jens G.]

@asgothian Ok
also einmal das:

zigbee.0
2025-05-20 19:32:46.369	error	Unable to apply converter from module: /opt/iobroker/iobroker-data/zigbee_0/esp32_c6_rgb.js - the code does not run: TypeError: light is not a function

zigbee.0
2025-05-20 19:32:46.359	warn	Trying to run sandbox for /opt/iobroker/iobroker-data/zigbee_0/esp32_c6_rgb.js

zigbee.0
2025-05-20 19:32:46.356	warn	trying to add "light = require(../zigbee-herdsman-converters/dist/lib/modernExtend)" to sandbox


zigbee.0
2025-05-20 19:34:09.992	warn	Device 0xf0f5bdfffe1027bc "ZBColorLightBulb" not found.

[Asgothian]

@jens-g das ist nicht das wonach ich gefragt hatte, aber ok. Welche Adapter version ?

A.

[Homoran]

@jens-g nochmals!

bitte nichts schnibbeln, verändern, weglassen oder hinzufügen!

so wie du das gepostet hast, hast du ein Problem mit deiner Zeitlinie.
Wenn das die TVA erfährt, wirst du gestutzt.

[Jens G.]

@homoran Ok verstanden hier kompletter Log von heute:

log iobroker

[Homoran]

@jens-g sagte in ESP32-C6 Zigbee Support external converter Bitte um Hilfe:

hier kompletter Log von heute:

es reicht das log aus der Zeit nach dem Start der Instanz.
Dieses unverändert hier in code-tags posten.

Siehe auch
https://forum.iobroker.net/topic/51555/hinweise-für-gute-forenbeiträge/1

[Jens G.]

@asgothian Die von dir empfohlene Version 3.0.1

[Jens G.]

@homoran

so direkt nach Start des Adapters

zigbee.0
2025-05-20 19:49:07.335	warn	DeviceConfigure:0xa4c138f0cf2205e4 TS011F Failed to configure. --> ZCL command 0xa4c138f0cf2205e4/1 genBasic.read(["manufacturerName","zclVersion","appVersion","modelId","powerSource",65534], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"reservedBits":0,"writeUndiv":false}) failed (Data request failed with error: 'No network route' (205))

admin.0
2025-05-20 19:49:06.258	info	<== Disconnect system.user.admin from ::ffff:192.168.188.21

admin.0
2025-05-20 19:49:06.258	info	<== Disconnect system.user.admin from ::ffff:192.168.188.21

maxcul.0
2025-05-20 19:49:01.027	info	checkTimeIntervalFired

zigbee.0
2025-05-20 19:49:00.702	info	Timeout trying to configure 0xa4c138cb153fc055 ZG-227Z (starting CoM).

zigbee.0
2025-05-20 19:48:47.623	info	Handled all devices Queued for configuration.

zigbee.0
2025-05-20 19:48:42.624	info	Configuring 0xa4c138f0cf2205e4 TS011F_plug_1

zigbee.0
2025-05-20 19:48:42.623	info	DeviceConfigureQueue configuring 0xa4c138f0cf2205e4 TS011F

zigbee.0
2025-05-20 19:48:37.626	info	Configuring 0xa4c138cb153fc055 ZG-227Z

zigbee.0
2025-05-20 19:48:37.623	info	DeviceConfigureQueue configuring 0xa4c138cb153fc055 TS0601

zigbee.0
2025-05-20 19:48:36.520	info	Failed to ping 0xa4c138f0cf2205e4 TS011F

zigbee.0
2025-05-20 19:48:33.556	info	Failed to ping 0x7cb03eaa0a00c5df CLA60 TW OSRAM

zigbee.0
2025-05-20 19:48:33.363	warn	Device 0xf0f5bdfffe1027bc "ZBColorLightBulb" not found.

zigbee.0
2025-05-20 19:48:32.905	info	debug devices set to []

zigbee.0
2025-05-20 19:48:32.631	info	DeviceConfigure 0xa4c138f0cf2205e4 TS011F_plug_1 needed - Device added to Configuration Queue

zigbee.0
2025-05-20 19:48:32.620	info	DeviceConfigure 0xa4c138cb153fc055 ZG-227Z needed - Device added to Configuration Queue

zigbee.0
2025-05-20 19:48:32.590	info	Zigbee started

zigbee.0
2025-05-20 19:48:32.588	info	Currently 12 devices are joined:

zigbee.0
2025-05-20 19:48:32.587	info	0xf0f5bdfffe1027bc (addr 46627): Unsupported (model ZBColorLightBulb)(EndDevice)

zigbee.0
2025-05-20 19:48:32.585	info	0x0cae5ffffe82e3d6 (addr 32534): TS0207_repeater - Tuya Repeater (Router)

zigbee.0
2025-05-20 19:48:32.580	info	0xa4c138c634121179 (addr 19196): TS011F_plug_1 - Tuya Smart plug (with power monitoring) (Router)

zigbee.0
2025-05-20 19:48:32.574	info	0xa4c138f0cf2205e4 (addr 60744): TS011F_plug_1 - Tuya Smart plug (with power monitoring) (Router)

zigbee.0
2025-05-20 19:48:32.567	info	0xa4c13882aaaf7096 (addr 7741): TS0207_water_leak_detector_1 - Tuya Zigbee water flood sensor + 1m probe cable (EndDevice)

zigbee.0
2025-05-20 19:48:32.559	info	0xa4c138cb153fc055 (addr 19127): ZG-227Z - Tuya Temperature and humidity sensor (EndDevice)

zigbee.0
2025-05-20 19:48:32.411	info	0xe406bffffe38c827 (addr 603): ZBMINIR2 - SONOFF Zigbee smart switch (Router)

zigbee.0
2025-05-20 19:48:32.385	info	0xa4c1384e05b39d11 (addr 57525): TS011F_plug_1 - Tuya Smart plug (with power monitoring) (Router)

zigbee.0
2025-05-20 19:48:32.145	info	0x7cb03eaa0a00c5df (addr 56980): AC03642 - OSRAM SMART+ CLASSIC A 60 TW (Router)

zigbee.0
2025-05-20 19:48:32.128	info	0x00158d00051e85e8 (addr 16633): WSDCGQ11LM - Aqara Temperature and humidity sensor (EndDevice)

zigbee.0
2025-05-20 19:48:32.123	info	0x00158d0002732ad3 (addr 25672): RTCGQ11LM - Aqara Motion sensor (EndDevice)

zigbee.0
2025-05-20 19:48:32.113	info	0x00158d0002f7bc51 (addr 27407): WXKG01LM - Xiaomi Mi wireless switch (EndDevice)

zigbee.0
2025-05-20 19:48:31.985	info	Unable to disable LED, unsupported function.

zigbee.0
2025-05-20 19:48:31.983	info	Zigbee-Herdsman started successfully with Coordinator firmware version: zStack3x0 : 20230507 (2-1.2.7.1)

zigbee.0
2025-05-20 19:48:31.465	info	Starting Zigbee-Herdsman

zigbee.0
2025-05-20 19:48:31.461	info	Installed Version: iobroker.zigbee@3.0.1 (Converters 23.13.0 Herdsman 3.3.2)

zigbee.0
2025-05-20 19:48:31.440	info	Starting Adapter npm ...

zigbee.0
2025-05-20 19:48:31.433	info	--> transmitPower : high+

zigbee.0
2025-05-20 19:48:27.454	info	List of port: [{"path":"/dev/ttyUSB0","manufacturer":"SHK","serialNumber":"868","pnpId":"usb-SHK_NANO_CUL_868-if00-port0","vendorId":"0403","productId":"6001"},{"path":"/dev/ttyUSB1","manufacturer":"ITead","serialNumber":"78c227e46ed8ed11ad85736162c613ac","pnpId":"usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_78c227e46ed8ed11ad85736162c613ac-if00-port0","vendorId":"10c4","productId":"ea60"}]

admin.0
2025-05-20 19:48:27.192	info	==> Connected system.user.admin from ::ffff:192.168.188.21

admin.0
2025-05-20 19:47:39.912	info	<== Disconnect system.user.admin from ::ffff:192.168.188.21

zigbee.0
2025-05-20 19:47:37.963	info	List of port: [{"path":"/dev/ttyUSB0","manufacturer":"SHK","serialNumber":"868","pnpId":"usb-SHK_NANO_CUL_868-if00-port0","vendorId":"0403","productId":"6001"},{"path":"/dev/ttyUSB1","manufacturer":"ITead","serialNumber":"78c227e46ed8ed11ad85736162c613ac","pnpId":"usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_78c227e46ed8ed11ad85736162c613ac-if00-port0","vendorId":"10c4","productId":"ea60"}]

[Asgothian]

@jens-g Nein, ist es nicht. Das fehlt was.

Beispiel wie es aussehen müsste:

2025-05-20 19:50:06.463 - info: host.raspberrypi instance system.adapter.zigbee.0 in version "3.0.0" (non-npm: asgothian/ioBroker.zigbee#3.0.x_RC1) started with pid 3671847
2025-05-20 19:50:07.362 - info: zigbee.0 (3671847) starting. Version 3.0.0 (non-npm: asgothian/ioBroker.zigbee#3.0.x_RC1) in /opt/iobroker/node_modules/iobroker.zigbee, node: v20.19.1, js-controller: 7.0.6
2025-05-20 19:50:07.378 - info: zigbee.0 (3671847) Adapter ready - starting subsystems. Adapter is running in info mode.
2025-05-20 19:50:07.380 - warn: zigbee.0 (3671847) trying to add "m = require(../zigbee-herdsman-converters/dist/lib/modernExtend)" to sandbox
2025-05-20 19:50:07.381 - warn: zigbee.0 (3671847) trying to add "type {DefinitionWithExtend} = require(../zigbee-herdsman-converters/dist/lib/types)" to sandbox
2025-05-20 19:50:07.382 - error: zigbee.0 (3671847) converter does not export any converter array, please add 'module.exports' statement to /opt/iobroker/iobroker-data/zigbee_0/shelly.js
2025-05-20 19:50:07.382 - info: zigbee.0 (3671847) Ignoring converter from module: /opt/iobroker/iobroker-data/zigbee_0/shelly.js - see warn messages for reason
2025-05-20 19:50:07.383 - warn: zigbee.0 (3671847) Trying to run sandbox for /opt/iobroker/iobroker-data/zigbee_0/esp.js
2025-05-20 19:50:07.386 - info: zigbee.0 (3671847) Model ZBColorLightBulb defined in external converter /opt/iobroker/iobroker-data/zigbee_0/esp.js
2025-05-20 19:50:07.387 - info: zigbee.0 (3671847) added external converter using addExternalDefinition (0 ms)
2025-05-20 19:50:07.387 - info: zigbee.0 (3671847) init localConfig
2025-05-20 19:50:07.391 - info: zigbee.0 (3671847) --> transmitPower : normal
2025-05-20 19:50:07.415 - info: zigbee.0 (3671847) delete old Backup files. keep only last 10
2025-05-20 19:50:07.416 - info: zigbee.0 (3671847) --- creating device debug ---
2025-05-20 19:50:07.417 - info: zigbee.0 (3671847) Starting Adapter npm ...
2025-05-20 19:50:07.427 - info: zigbee.0 (3671847) Installed Version: asgothian/ioBroker.zigbee#3.0.x_RC1 (Converters 23.13.0 Herdsman 3.3.2)
2025-05-20 19:50:07.428 - info: zigbee.0 (3671847) Starting Zigbee-Herdsman
2025-05-20 19:50:07.785 - info: zigbee.0 (3671847) Zigbee-Herdsman started successfully with Coordinator firmware version: zStack3x0 : 20210708 (2-1.2.7.1)
2025-05-20 19:50:07.785 - info: zigbee.0 (3671847) Unable to disable LED, unsupported function.

Seis Drum:

Bitte den externen Konverter anpassen:

modernExtend = require("zigbee-herdsman-converters/lib/modernExtend");
 
module.exports = [
{
    zigbeeModel: ['ZBColorLightBulb'], // Anpassen an das tats  chliche Modell
    model: 'ZBColorLightBulb',
    vendor: 'Espressif',
    description: 'ESP32-C6 RGB LED',
    extend: [modernExtend.light({colorTemp: {range: [150, 500]}, color: true})],}
];