Test Adapter MercedesMe v0.0.x

[ewc]

@sigma415 said in Test Adapter MercedesMe v0.0.x:

Reconnect delay stand auf 60 sec, habe jetzt wieder erhöht auf 300 sec.

Egal, was ich im "Reconnect" eingebe, sieht es so aus, als wenn die Verbindung alle 30 Sekunden "angepingt" wird, worauf ein "Pong" folgt

-schnipp____
mercedesme.0 2025-02-11 15:11:24.395 debug Ping
mercedesme.0 2025-02-11 15:11:24.441 debug Pong
mercedesme.0 2025-02-11 15:11:54.395 debug Ping
mercedesme.0 2025-02-11 15:11:54.417 debug Pong

[tombox]

@ewc bitte 0.3.7 testen es enthält weniger Mails und mehr Logs

[ewc]

@tombox said in Test Adapter MercedesMe v0.0.x:

@ewc bitte 0.3.7 testen es enthält weniger Mails und mehr Logs

Moin...

ist zwischenzeitlich auf 0.3.7 umgestellt

Ist das so mit dem Ping / Pong alle 30 Sekunden korrekt? das macht er nämlich immer noch

mercedesme.0 2025-02-12 11:33:37.103 debug Ping
mercedesme.0 2025-02-12 11:33:37.124 debug Pong
mercedesme.0 2025-02-12 11:34:03.984 debug Received State Updated
mercedesme.0 2025-02-12 11:34:03.984 debug update for -Vin habe ich entfernt
mercedesme.0 2025-02-12 11:34:03.984 debug write 31 states to proximityCalculationForVehiclePositionRequired
mercedesme.0 2025-02-12 11:34:03.998 debug write done
mercedesme.0 2025-02-12 11:34:03.998 debug write 31 states to tcuConnectionStateLowChannel
mercedesme.0 2025-02-12 11:34:04.018 debug Pong
mercedesme.0 2025-02-12 11:34:04.082 debug write done
mercedesme.0 2025-02-12 11:34:04.082 debug write 31 states to vehicleDataConnectionState
mercedesme.0 2025-02-12 11:34:04.143 debug write done
mercedesme.0 2025-02-12 11:34:04.144 debug write 31 states to vehiclePositionErrorCode
mercedesme.0 2025-02-12 11:34:04.161 debug write done
mercedesme.0 2025-02-12 11:34:07.103 debug Ping
mercedesme.0 2025-02-12 11:34:07.121 debug Pong

----update
soeben ist der Adapter offenbar wieder "rausgeschmissen"

mercedesme.0 2025-02-12 11:35:37.103 debug Ping
mercedesme.0 2025-02-12 11:35:37.135 debug Pong
mercedesme.0 2025-02-12 11:36:07.103 debug Ping
mercedesme.0 2025-02-12 11:36:07.132 debug Pong
mercedesme.0 2025-02-12 11:36:37.105 debug Ping
mercedesme.0 2025-02-12 11:36:37.135 debug Pong
mercedesme.0 2025-02-12 11:37:07.105 debug Ping
mercedesme.0 2025-02-12 11:37:07.132 debug Pong
mercedesme.0 2025-02-12 11:37:09.013 debug 1001
mercedesme.0 2025-02-12 11:37:09.013 debug Websocket closed

[tombox]

@ewc Ja ping ist gewollte damit er nicht die Verbindung verliert
Ein paar Statistiken wäre gut..
Wie lange dauert es bis websocket closed kommt und wieviel reconnects am Tag sind möglich

[sigma415]

@tombox

Hier meine Log-Zeilen seit der Installation von v0.3.7 gestern bis Mitternacht.
Ging dann nach Mitternacht identisch so weiter, Reconnects alle 60 Minuten.
Keine "429 Too many requests. The account is blocked until 0:00"-Einträge
Delay stand aber auf 240 sec.
Ich habe Delay jetzt wieder testweise auf 60 sec gesetzt

2025-02-12 15:07:47.268 - info: host.ubuntu-server iobroker url TA2k/ioBroker.mercedesme --host ubuntu-server --debug
2025-02-12 15:07:48.795 - info: host.ubuntu-server iobroker install TA2k/ioBroker.mercedesme
2025-02-12 15:07:49.055 - info: host.ubuntu-server iobroker NPM version: 10.8.2Installing TA2k/ioBroker.mercedesme... (System call)
2025-02-12 15:07:54.556 - info: host.ubuntu-server iobroker
2025-02-12 15:07:54.557 - info: host.ubuntu-server iobroker changed 1 package in 5s80 packages are looking for funding run `npm fund` for details
2025-02-12 15:07:54.646 - info: host.ubuntu-server iobroker upload [4] mercedesme.admin /opt/iobroker/node_modules/iobroker.mercedesme/admin/admin.d.ts admin.d.ts video/mp2t
2025-02-12 15:07:54.656 - info: host.ubuntu-server iobroker upload [3] mercedesme.admin /opt/iobroker/node_modules/iobroker.mercedesme/admin/index_m.html index_m.html text/html
2025-02-12 15:07:54.661 - info: host.ubuntu-server iobroker upload [2] mercedesme.admin /opt/iobroker/node_modules/iobroker.mercedesme/admin/mercedesme.png mercedesme.png image/png
2025-02-12 15:07:54.667 - info: host.ubuntu-server iobroker upload [1] mercedesme.admin /opt/iobroker/node_modules/iobroker.mercedesme/admin/style.css style.css text/css
2025-02-12 15:07:54.672 - info: host.ubuntu-server iobroker upload [0] mercedesme.admin /opt/iobroker/node_modules/iobroker.mercedesme/admin/words.js words.js application/javascript
2025-02-12 15:07:54.681 - info: host.ubuntu-server iobroker Updating objects from io-package.json for adapter "mercedesme" with version "0.3.7"
2025-02-12 15:07:54.713 - info: host.ubuntu-server iobroker Update "system.adapter.mercedesme.0"
2025-02-12 15:07:54.718 - info: host.ubuntu-server stopInstance system.adapter.mercedesme.0 (force=false, process=true)
2025-02-12 15:07:54.721 - info: mercedesme.0 (2940117) Got terminate signal TERMINATE_YOURSELF
2025-02-12 15:07:54.723 - info: mercedesme.0 (2940117) terminating
2025-02-12 15:07:54.724 - info: mercedesme.0 (2940117) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2025-02-12 15:07:54.763 - info: host.ubuntu-server stopInstance system.adapter.mercedesme.0 send kill signal
2025-02-12 15:07:55.226 - info: mercedesme.0 (2940117) terminating
2025-02-12 15:07:55.320 - info: host.ubuntu-server instance system.adapter.mercedesme.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2025-02-12 15:07:55.779 - info: host.ubuntu-server iobroker exit 0
2025-02-12 15:07:58.890 - info: host.ubuntu-server instance system.adapter.mercedesme.0 in version "0.3.7" (non-npm: TA2k/ioBroker.mercedesme) started with pid 2941072
2025-02-12 15:08:00.584 - info: mercedesme.0 (2941072) starting. Version 0.3.7 (non-npm: TA2k/ioBroker.mercedesme) in /opt/iobroker/node_modules/iobroker.mercedesme, node: v20.18.3, js-controller: 7.0.6
2025-02-12 15:08:00.809 - info: mercedesme.0 (2941072) Found old session. Try to refresh token
2025-02-12 15:08:01.011 - info: mercedesme.0 (2941072) Refresh token successfull
2025-02-12 15:08:01.217 - info: mercedesme.0 (2941072) Found 1 vehicles
2025-02-12 15:08:01.217 - info: mercedesme.0 (2941072) Creating vehicle <DELETED> with <DELETED>
2025-02-12 15:08:01.254 - info: mercedesme.0 (2941072) Start Websocket Connection
2025-02-12 15:10:17.720 - info: admin.0 (1145676) ==> Connected system.user.admin from ::ffff:192.168.<DELETED>
2025-02-12 15:10:26.841 - info: admin.0 (1145676) <== Disconnect system.user.admin from ::ffff:192.168.<DELETED>
2025-02-12 15:15:02.231 - info: admin.0 (1145676) <== Disconnect system.user.admin from ::ffff:192.168.<DELETED> admin
2025-02-12 15:25:01.295 - info: mercedesme.0 (2941072) No Data since 240 seconds. Lost WebSocket connection. Reconnect WebSocket. Reconnects Today: NaN
2025-02-12 15:43:33.333 - info: mercedesme.0 (2941072) No Data since 240 seconds. Lost WebSocket connection. Reconnect WebSocket. Reconnects Today: NaN
2025-02-12 16:05:05.379 - info: mercedesme.0 (2941072) No Data since 240 seconds. Lost WebSocket connection. Reconnect WebSocket. Reconnects Today: NaN
2025-02-12 16:08:01.127 - info: mercedesme.0 (2941072) Reconnect after refresh token
2025-02-12 16:26:03.165 - info: mercedesme.0 (2941072) No Data since 240 seconds. Lost WebSocket connection. Reconnect WebSocket. Reconnects Today: NaN
2025-02-12 16:43:35.208 - info: mercedesme.0 (2941072) No Data since 240 seconds. Lost WebSocket connection. Reconnect WebSocket. Reconnects Today: NaN
2025-02-12 16:59:37.253 - info: mercedesme.0 (2941072) No Data since 240 seconds. Lost WebSocket connection. Reconnect WebSocket. Reconnects Today: NaN
2025-02-12 17:08:01.506 - info: mercedesme.0 (2941072) Reconnect after refresh token
2025-02-12 17:28:33.546 - info: mercedesme.0 (2941072) No Data since 240 seconds. Lost WebSocket connection. Reconnect WebSocket. Reconnects Today: NaN
2025-02-12 17:47:35.588 - info: mercedesme.0 (2941072) No Data since 240 seconds. Lost WebSocket connection. Reconnect WebSocket. Reconnects Today: NaN
2025-02-12 18:01:05.143 - error: fiat.0 (2085114) AxiosError: Request failed with status code 504
2025-02-12 18:01:05.150 - error: fiat.0 (2085114) Request failed: svla
2025-02-12 18:01:05.150 - error: fiat.0 (2085114) {"name":"Internal server error","message":"Internal server error"}
2025-02-12 18:01:05.150 - error: fiat.0 (2085114) get vehicles svla failed
2025-02-12 18:03:37.623 - info: mercedesme.0 (2941072) No Data since 240 seconds. Lost WebSocket connection. Reconnect WebSocket. Reconnects Today: NaN
2025-02-12 18:08:01.229 - info: mercedesme.0 (2941072) Reconnect after refresh token
2025-02-12 18:18:50.769 - info: admin.0 (1145676) Adapter rating updated
2025-02-12 18:29:03.271 - info: mercedesme.0 (2941072) No Data since 240 seconds. Lost WebSocket connection. Reconnect WebSocket. Reconnects Today: NaN
2025-02-12 18:49:35.311 - info: mercedesme.0 (2941072) No Data since 240 seconds. Lost WebSocket connection. Reconnect WebSocket. Reconnects Today: NaN
2025-02-12 19:08:01.114 - info: mercedesme.0 (2941072) Reconnect after refresh token
2025-02-12 19:24:03.152 - info: mercedesme.0 (2941072) No Data since 240 seconds. Lost WebSocket connection. Reconnect WebSocket. Reconnects Today: NaN
2025-02-12 19:42:05.196 - info: mercedesme.0 (2941072) No Data since 240 seconds. Lost WebSocket connection. Reconnect WebSocket. Reconnects Today: NaN
2025-02-12 20:00:37.231 - info: mercedesme.0 (2941072) No Data since 240 seconds. Lost WebSocket connection. Reconnect WebSocket. Reconnects Today: NaN
2025-02-12 20:08:01.118 - info: mercedesme.0 (2941072) Reconnect after refresh token
2025-02-12 20:29:33.161 - info: mercedesme.0 (2941072) No Data since 240 seconds. Lost WebSocket connection. Reconnect WebSocket. Reconnects Today: NaN
2025-02-12 20:48:35.202 - info: mercedesme.0 (2941072) No Data since 240 seconds. Lost WebSocket connection. Reconnect WebSocket. Reconnects Today: NaN
2025-02-12 21:08:01.091 - info: mercedesme.0 (2941072) Reconnect after refresh token
2025-02-12 21:27:03.131 - info: mercedesme.0 (2941072) No Data since 240 seconds. Lost WebSocket connection. Reconnect WebSocket. Reconnects Today: NaN
2025-02-12 21:44:05.175 - info: mercedesme.0 (2941072) No Data since 240 seconds. Lost WebSocket connection. Reconnect WebSocket. Reconnects Today: NaN
2025-02-12 22:02:37.222 - info: mercedesme.0 (2941072) No Data since 240 seconds. Lost WebSocket connection. Reconnect WebSocket. Reconnects Today: NaN
2025-02-12 22:08:01.097 - info: mercedesme.0 (2941072) Reconnect after refresh token
2025-02-12 22:27:33.143 - info: mercedesme.0 (2941072) No Data since 240 seconds. Lost WebSocket connection. Reconnect WebSocket. Reconnects Today: NaN
2025-02-12 22:47:05.181 - info: mercedesme.0 (2941072) No Data since 240 seconds. Lost WebSocket connection. Reconnect WebSocket. Reconnects Today: NaN
2025-02-12 23:05:37.227 - info: mercedesme.0 (2941072) No Data since 240 seconds. Lost WebSocket connection. Reconnect WebSocket. Reconnects Today: NaN
2025-02-12 23:08:01.118 - info: mercedesme.0 (2941072) Reconnect after refresh token
2025-02-12 23:25:33.165 - info: mercedesme.0 (2941072) No Data since 240 seconds. Lost WebSocket connection. Reconnect WebSocket. Reconnects Today: NaN
2025-02-12 23:41:35.197 - info: mercedesme.0 (2941072) No Data since 240 seconds. Lost WebSocket connection. Reconnect WebSocket. Reconnects Today: NaN

[diverandre]

@shadow_cb konntest du die Datenpunkte zum wechseln des Ladeprogramm finden ?

[tombox]

@sigma415 bitte das mit der GitHub version wiederholen

[sigma415]

@tombox
??? Das war die Github-Version 0.3.7.
Gibt es eine neuere ?

[sigma415]

@tombox

Mit Delay = 60 sec kommen die "429 Too many requests. The account is blocked until 0:00. Reconnects Today: NaN"
wieder alle 5 Minuten zwischen ca. 23:40 h und 01:00h.
Danach wieder "Reconnect after refresh token" alle 60 Minuten.
Gehe wieder auf Delay = 240.

GitHub-Version 0.3.7

[klassisch]

@sigma415 sagte in Test Adapter MercedesMe v0.0.x:

Gehe wieder auf Delay = 240.

Ich fahre noch immer mit delay = 600

[tombox]

@sigma415 GitHub version 5b76638a09e5237cb72edf7e3cb84020805987e3

[sigma415]

@tombox
OK. Wo finde ich die und wie installiere ich die ?

[Duffy]

@tombox

Hallo tombox,

ich habe die 0.3.6 installiert aber es kommt keine Mail und entsprechend wir der Adapter nicht grün.

Es wird folgende Meldung in Protokoll ausgegeben:

mercedesme.0
	2025-02-15 13:53:21.657	error	No credentials found please enter your credentials in the instance settings

E-Mail habe ich natürlich eingeben.

Was kann ich machen damit der Adapter wieder läuft?

VG Duffy

[sigma415]

@sigma415 sagte in Test Adapter MercedesMe v0.0.x:

@tombox
OK. Wo finde ich die und wie installiere ich die ?

@tombox : OK, ich glaube ich hab's hingekriegt ?!?!

War das richtig so ?
Die HTTPS-URL aus GitHub kopiert

und in ioB eine "Benutzerdefinierte Installation" von diesem Link gemacht.

Jedenfalls steht dann im Log was von "non-npm: TA2k/ioBroker.mercedesme#5b76638a09e5237cb72edf7e3cb84020805987e3"

2025-02-15 17:48:55.647 - info: mercedesme.0 (3862272) terminating
2025-02-15 17:48:55.742 - info: host.ubuntu-server instance system.adapter.mercedesme.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2025-02-15 17:48:59.485 - info: host.ubuntu-server instance system.adapter.mercedesme.0 in version "0.3.7" (non-npm: TA2k/ioBroker.mercedesme#5b76638a09e5237cb72edf7e3cb84020805987e3) started with pid 3862782
2025-02-15 17:49:01.169 - info: mercedesme.0 (3862782) starting. Version 0.3.7 (non-npm: TA2k/ioBroker.mercedesme#5b76638a09e5237cb72edf7e3cb84020805987e3) in /opt/iobroker/node_modules/iobroker.mercedesme, node: v20.18.3, js-controller: 7.0.6
2025-02-15 17:49:01.396 - info: mercedesme.0 (3862782) Found old session. Try to refresh token
2025-02-15 17:49:01.623 - info: mercedesme.0 (3862782) Refresh token successfull
2025-02-15 17:49:01.919 - info: mercedesme.0 (3862782) Found 1 vehicles
2025-02-15 17:49:01.919 - info: mercedesme.0 (3862782) Creating vehicle WWWWWWWWWW with XXXXXX
2025-02-15 17:49:01.971 - info: mercedesme.0 (3862782) Start Websocket Connection
2025-02-15 17:51:59.810 - info: admin.0 (1145676) <== Disconnect system.user.admin from ::ffff:192.168.xxx.yyy

Passt das erstmal so ?

[tombox]

@sigma415 Ja das passt

[tombox]

@duffy Email und Passwort in den Einstellungen eingeben

[Duffy]

@tombox

Danke, läuft

Gruß Duffy

[sigma415]

@tombox sagte in Test Adapter MercedesMe v0.0.x:

@sigma415 bitte das mit der GitHub version wiederholen

@tombox Hier ein 24h-Tages-Log aus GitHub-Version TA2k/ioBroker.mercedesme#5b76638a09e5237cb72edf7e3cb84020805987e3 mit Delay = 240 Sekunden.
Ich wiederhole das jetzt mit Delay = 60 Sekunden. Neues Log folgt dann übermorgen.

iobroker.2025-02-16_anonym.log

[sigma415]

@tombox
Hier jetzt 2 Stück 24h-Logs mit Delay = 60 Sekunden:
iobroker.2025-02-18_anonym.log
iobroker.2025-02-19_anonym.log

[tombox]

@sigma415 Ein test mit 70 wäre noch interessant