NEWS
fritzdect Adapter Fehler alle 10 Sekunden im Log
ioBroker Allgemein
28
Beiträge
12
Kommentatoren
3.3k
Aufrufe
11
Watching
-
@pjo123456 da fehlt noch der Instanzenname, und
@ro75 sagte in fritzdect Adapter Fehler alle 10 Sekunden im Log:
ein größeren Auszug aus dem Log wäre nicht schlecht.
damit man die Zusammenhänge erkennen kann, was diese Meldung auslöst.
Hier mal der Log nach einem Neustart des Adapters:
fritzdect.0 2024-12-29 12:11:52.399 error try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') fritzdect.0 2024-12-29 12:11:42.412 error try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') fritzdect.0 2024-12-29 12:11:32.090 info going over to cyclic polling, messages to poll activity only in debug-mode fritzdect.0 2024-12-29 12:11:32.089 info finished initial updating devices/groups fritzdect.0 2024-12-29 12:11:32.081 error try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') fritzdect.0 2024-12-29 12:11:31.767 info start initial updating devices/groups fritzdect.0 2024-12-29 12:11:31.767 info finished creating routines (if any) fritzdect.0 2024-12-29 12:11:31.494 info start creating routines fritzdect.0 2024-12-29 12:11:31.494 info routines are used(false) fritzdect.0 2024-12-29 12:11:31.494 info finished creating templates (if any) fritzdect.0 2024-12-29 12:11:31.245 info CREATE Templates 19 fritzdect.0 2024-12-29 12:11:30.927 info start creating templates fritzdect.0 2024-12-29 12:11:30.927 info templates are used(false) fritzdect.0 2024-12-29 12:11:30.927 info finished creating devices/groups (if any) fritzdect.0 2024-12-29 12:11:30.926 error iob err => undefined fritzdect.0 2024-12-29 12:11:30.926 error --------------- error calling the fritzbox ----------- fritzdect.0 2024-12-29 12:11:30.926 error try/catch createDevices TypeError: Cannot read properties of undefined (reading 'replace') fritzdect.0 2024-12-29 12:11:30.922 info CREATE Devices 8 fritzdect.0 2024-12-29 12:11:30.596 info start creating devices/groups fritzdect.0 2024-12-29 12:11:30.596 info finished creating global values fritzdect.0 2024-12-29 12:11:30.587 info create Main object global channel list fritzdect.0 2024-12-29 12:11:30.587 info ____________________________________________ fritzdect.0 2024-12-29 12:11:30.587 info start creating global values fritzdect.0 2024-12-29 12:11:30.587 info the rights are : {"Rights":{"Name":["Dial","App","HomeAuto","BoxAdmin","Phone","NAS"],"Access":["2","2","2","2","2","2"]}} fritzdect.0 2024-12-29 12:11:30.366 info checking user permissions fritzdect.0 2024-12-29 12:11:29.767 info fritzdect uses USER: pjo12345 fritzdect.0 2024-12-29 12:11:29.748 info fritzdect entered ready fritzdect.0 2024-12-29 12:11:29.734 info starting. Version 2.5.11 in /opt/iobroker/node_modules/iobroker.fritzdect, node: v18.20.5, js-controller: 7.0.3 fritzdect.0 2024-12-29 12:11:25.314 info terminating fritzdect.0 2024-12-29 12:11:24.994 error try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') fritzdect.0 2024-12-29 12:11:24.813 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason fritzdect.0 2024-12-29 12:11:24.813 info terminating fritzdect.0 2024-12-29 12:11:24.812 info cleaned everything up... fritzdect.0 2024-12-29 12:11:24.811 info Got terminate signal TERMINATE_YOURSELFFritzbox: 6660 Cable, FritzOS: 8.01
Geräte:-
Thermostate: 3x Comet DECT (Fritz DECT 300)
-
2x Fritzdect 200 Steckdosen
ioBroker läuft in einem Container auf proxmox (alles auf aktuellem Stand)
fritzdect Adapter: 2.5.11
npm: 10.8.2
nodejs: 18.20.5Moin aus dem Norden…
-
-
Hier mal der Log nach einem Neustart des Adapters:
fritzdect.0 2024-12-29 12:11:52.399 error try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') fritzdect.0 2024-12-29 12:11:42.412 error try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') fritzdect.0 2024-12-29 12:11:32.090 info going over to cyclic polling, messages to poll activity only in debug-mode fritzdect.0 2024-12-29 12:11:32.089 info finished initial updating devices/groups fritzdect.0 2024-12-29 12:11:32.081 error try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') fritzdect.0 2024-12-29 12:11:31.767 info start initial updating devices/groups fritzdect.0 2024-12-29 12:11:31.767 info finished creating routines (if any) fritzdect.0 2024-12-29 12:11:31.494 info start creating routines fritzdect.0 2024-12-29 12:11:31.494 info routines are used(false) fritzdect.0 2024-12-29 12:11:31.494 info finished creating templates (if any) fritzdect.0 2024-12-29 12:11:31.245 info CREATE Templates 19 fritzdect.0 2024-12-29 12:11:30.927 info start creating templates fritzdect.0 2024-12-29 12:11:30.927 info templates are used(false) fritzdect.0 2024-12-29 12:11:30.927 info finished creating devices/groups (if any) fritzdect.0 2024-12-29 12:11:30.926 error iob err => undefined fritzdect.0 2024-12-29 12:11:30.926 error --------------- error calling the fritzbox ----------- fritzdect.0 2024-12-29 12:11:30.926 error try/catch createDevices TypeError: Cannot read properties of undefined (reading 'replace') fritzdect.0 2024-12-29 12:11:30.922 info CREATE Devices 8 fritzdect.0 2024-12-29 12:11:30.596 info start creating devices/groups fritzdect.0 2024-12-29 12:11:30.596 info finished creating global values fritzdect.0 2024-12-29 12:11:30.587 info create Main object global channel list fritzdect.0 2024-12-29 12:11:30.587 info ____________________________________________ fritzdect.0 2024-12-29 12:11:30.587 info start creating global values fritzdect.0 2024-12-29 12:11:30.587 info the rights are : {"Rights":{"Name":["Dial","App","HomeAuto","BoxAdmin","Phone","NAS"],"Access":["2","2","2","2","2","2"]}} fritzdect.0 2024-12-29 12:11:30.366 info checking user permissions fritzdect.0 2024-12-29 12:11:29.767 info fritzdect uses USER: pjo12345 fritzdect.0 2024-12-29 12:11:29.748 info fritzdect entered ready fritzdect.0 2024-12-29 12:11:29.734 info starting. Version 2.5.11 in /opt/iobroker/node_modules/iobroker.fritzdect, node: v18.20.5, js-controller: 7.0.3 fritzdect.0 2024-12-29 12:11:25.314 info terminating fritzdect.0 2024-12-29 12:11:24.994 error try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') fritzdect.0 2024-12-29 12:11:24.813 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason fritzdect.0 2024-12-29 12:11:24.813 info terminating fritzdect.0 2024-12-29 12:11:24.812 info cleaned everything up... fritzdect.0 2024-12-29 12:11:24.811 info Got terminate signal TERMINATE_YOURSELFFritzbox: 6660 Cable, FritzOS: 8.01
Geräte:-
Thermostate: 3x Comet DECT (Fritz DECT 300)
-
2x Fritzdect 200 Steckdosen
ioBroker läuft in einem Container auf proxmox (alles auf aktuellem Stand)
fritzdect Adapter: 2.5.11
npm: 10.8.2
nodejs: 18.20.5@pjo123456 bitte einmal
iob diagsieht nicht aktuell aus
Und dann bitte noch die Konfiguration vom Adapter.
Ro75
-
-
@pjo123456 bitte einmal
iob diagsieht nicht aktuell aus
Und dann bitte noch die Konfiguration vom Adapter.
Ro75
========== Start marking the full check here =========== ```bash Script v.2024-10-19 *** BASE SYSTEM *** Static hostname: ioBrokerMasterLXC Icon name: computer-container Chassis: container ☐ Virtualization: lxc Operating System: Ubuntu 23.04 Kernel: Linux 6.8.12-5-pve Architecture: x86-64 Firmware Version: F5 OS is similar to: debian model name : Intel(R) Core(TM) i5-4200U CPU @ 1.60GHz Docker : false Virtualization : lxc Kernel : x86_64 Userland : 64 bit Systemuptime and Load: 12:27:59 up 8 days, 14:36, 2 users, load average: 1.17, 0.48, 0.21 CPU threads: 1 *** LIFE CYCLE STATUS *** Ubuntu Release codenamed 'lunar' reached its END OF LIFE and needs to be updated to the latest LTS release 'noble' NOW! *** TIME AND TIMEZONES *** Local time: Sun 2024-12-29 12:27:59 CET Universal time: Sun 2024-12-29 11:27:59 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: inactive RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': root HOME=/root GROUPS=root User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth A default user should be created! This user will be enabled to temporarily switch to root via 'sudo'! A root login is not required in most Linux Distributions. Run 'iobroker fix' or use the system tools to create a user. *** DISPLAY-SERVER SETUP *** Display-Server: false Desktop: Terminal: tty System is booting into 'graphical.target'. Usually a server is running in 'multi-user.target'. Please set BootTarget to 'multi-user.target' or run 'iobroker fix' *** MEMORY *** total used free shared buff/cache available Mem: 3.2G 1.4G 274M 94K 1.6G 1.8G Swap: 536M 244M 292M Total: 3.8G 1.6G 567M Active iob-Instances: 23 3072 M total memory 1326 M used memory 1241 M active memory 1423 M inactive memory 261 M free memory 0 M buffer memory 1484 M swap cache 512 M total swap 232 M used swap 279 M free swap *** top - Table Of Processes *** top - 12:27:59 up 8 days, 14:36, 2 users, load average: 1.17, 0.48, 0.21 Tasks: 50 total, 1 running, 49 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 0.0 sy, 0.0 ni,100.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3072.0 total, 259.3 free, 1327.8 used, 1485.2 buff/cache MiB Swap: 512.0 total, 279.0 free, 233.0 used. 1744.2 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * run-rpc_pipefs.mount loaded failed failed RPC Pipe File System LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** DMESG CRITICAL ERRORS *** dmesg: read kernel buffer failed: Operation not permitted No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/loop0 ext4 19G 13G 5.2G 71% / none tmpfs 492K 4.0K 488K 1% /dev efivarfs efivarfs 128K 96K 28K 78% /sys/firmware/efi/efivars tmpfs tmpfs 7.8G 0 7.8G 0% /dev/shm tmpfs tmpfs 3.2G 140K 3.2G 1% /run tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs tmpfs 1.6G 0 1.6G 0% /run/user/0 Messages concerning ext4 filesystem in dmesg: dmesg: read kernel buffer failed: Operation not permitted Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/loop0 ext4 rw,relatime Files in neuralgic directories: /var: 521M /var/ 233M /var/lib 164M /var/log 163M /var/log/journal/770cb772b2aa4c2a87f7acb50f04c359 163M /var/log/journal Archived and active journals take up 162.4M in the file system. /opt/iobroker/backups: 315M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 7.7G /opt/iobroker/iobroker-data/ 6.9G /opt/iobroker/iobroker-data/history 794M /opt/iobroker/iobroker-data/files 617M /opt/iobroker/iobroker-data/files/javascript.admin 560M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map 14M /opt/iobroker/iobroker-data/objects.jsonl 12M /opt/iobroker/iobroker-data/files/backitup.admin/static/js/main.bd24114f.js 9.6M /opt/iobroker/iobroker-data/history/20240312/history.ble.1.c4~7c~8d~6b~f9~60.rssi.json 9.5M /opt/iobroker/iobroker-data/history/20240311/history.ble.1.c4~7c~8d~6b~f9~60.rssi.json USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** NodeJS-Installation *** /usr/bin/nodejs v18.20.5 /usr/bin/node v18.20.5 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.4 nodejs: Installed: 18.20.5-1nodesource1 Candidate: 18.20.5-1nodesource1 Version table: *** 18.20.5-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 100 /var/lib/dpkg/status 18.20.4-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.20.3-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.20.2-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.20.1-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.20.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.19.1-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.19.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.18.2-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.18.1-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.18.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.17.1-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.17.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.16.1-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.16.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.15.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.14.2-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.14.1-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.14.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.13.0+dfsg1-1ubuntu2 500 500 http://archive.ubuntu.com/ubuntu lunar/universe amd64 Packages 18.13.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.12.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.11.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.10.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.9.1-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.9.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.8.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.7.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.6.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.5.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.4.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.3.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.2.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.1.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.0.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: ioBroker-Slave2 ioBroker-Slave2 (version: 7.0.3, hostname: ioBroker-Slave2, alive, uptime: 741772) ioBrokerMasterLXC ioBrokerMasterLXC (version: 7.0.3, hostname: ioBrokerMasterLXC, alive, uptime: 739393) Core adapters versions js-controller: 7.0.3 admin: 7.1.5 javascript: 8.8.3 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : ioBrokerMasterLXC - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : ioBroker-Slave2 - enabled + system.adapter.backitup.1 : backitup : ioBrokerMasterLXC - enabled system.adapter.ble.0 : ble : ioBrokerMasterLXC - disabled + system.adapter.ble.1 : ble : ioBroker-Slave2 - enabled + system.adapter.chromecast.0 : chromecast : ioBrokerMasterLXC - enabled + system.adapter.cloud.0 : cloud : ioBrokerMasterLXC - enabled + system.adapter.discovery.0 : discovery : ioBrokerMasterLXC - enabled + system.adapter.email.0 : email : ioBrokerMasterLXC - enabled system.adapter.flot.0 : flot : ioBrokerMasterLXC - disabled + system.adapter.fritzbox.0 : fritzbox : ioBrokerMasterLXC - enabled + system.adapter.fritzdect.0 : fritzdect : ioBrokerMasterLXC - enabled + system.adapter.history.0 : history : ioBrokerMasterLXC - enabled system.adapter.ical.0 : ical : ioBrokerMasterLXC - enabled + system.adapter.info.0 : info : ioBrokerMasterLXC - enabled + system.adapter.javascript.0 : javascript : ioBrokerMasterLXC - enabled + system.adapter.linux-control.0 : linux-control : ioBrokerMasterLXC - enabled + system.adapter.mqtt.0 : mqtt : ioBrokerMasterLXC - enabled, port: 1883, bind: 0.0.0.0 system.adapter.net-tools.0 : net-tools : ioBrokerMasterLXC - disabled system.adapter.pi-hole.0 : pi-hole : ioBrokerMasterLXC - disabled + system.adapter.ping.0 : ping : ioBrokerMasterLXC - enabled + system.adapter.proxmox.0 : proxmox : ioBrokerMasterLXC - enabled, port: 8006 + system.adapter.rpi2.1 : rpi2 : ioBroker-Slave2 - enabled + system.adapter.sayit.0 : sayit : ioBrokerMasterLXC - enabled + system.adapter.sonoff.0 : sonoff : ioBrokerMasterLXC - enabled, port: 1885, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : ioBrokerMasterLXC - enabled, port: 8443, bind: 0.0.0.0 system.adapter.vis-2-widgets-energy.0 : vis-2-widgets-energy : ioBrokerMasterLXC - disabled system.adapter.vis-2-widgets-gauges.0 : vis-2-widgets-gauges : ioBrokerMasterLXC - disabled system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: ioBrokerMasterLXC - disabled system.adapter.vis.0 : vis : ioBrokerMasterLXC - enabled + system.adapter.web.0 : web : ioBrokerMasterLXC - enabled, port: 8082, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : ioBrokerMasterLXC - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.mqtt.0 : mqtt : ioBrokerMasterLXC - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.proxmox.0 : proxmox : ioBrokerMasterLXC - enabled, port: 8006 + system.adapter.sonoff.0 : sonoff : ioBrokerMasterLXC - enabled, port: 1885, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : ioBrokerMasterLXC - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : ioBrokerMasterLXC - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Instances Used repository: stable Adapter "admin" : 7.1.5 , installed 7.1.5 Adapter "backitup" : 3.0.25 , installed 3.0.25 Adapter "ble" : 0.14.0 , installed 0.14.0 Adapter "chromecast" : 4.0.0 , installed 4.0.0 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "email" : 1.3.1 , installed 1.3.1 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fritzbox" : 0.6.0 , installed 0.6.0 Adapter "fritzdect" : 2.5.11 , installed 2.5.11 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "ical" : 1.16.1 , installed 1.16.1 Adapter "javascript" : 8.8.3 , installed 8.8.3 Controller "js-controller": 7.0.6 , installed 7.0.3 [Updatable] Adapter "linux-control": 1.1.5 , installed 1.1.5 Adapter "mqtt" : 6.1.2 , installed 6.1.2 Adapter "net-tools" : 1.0.11 , installed 1.0.11 Adapter "pi-hole" : 1.3.6 , installed 1.3.6 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "proxmox" : 2.3.0 , installed 2.3.0 Adapter "sayit" : 5.0.0 , installed 5.0.0 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "sonoff" : 3.1.2 , installed 3.1.2 Adapter "telegram" : 3.9.0 , installed 3.9.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-2-widgets-energy": 1.0.2, installed 1.0.2 Adapter "vis-2-widgets-gauges": 1.1.0, installed 1.1.0 Adapter "vis-2-widgets-material": 1.4.10, installed 1.4.10 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "ws" : 2.6.2 , installed 2.6.2 Objects and States Please stand by - This may take a while Objects: 3051 States: 2539 *** OS-Repositories and Updates *** E: The repository 'http://archive.ubuntu.com/ubuntu lunar Release' no longer has a Release file. E: The repository 'http://archive.ubuntu.com/ubuntu lunar-updates Release' no longer has a Release file. E: The repository 'http://archive.ubuntu.com/ubuntu lunar-security Release' no longer has a Release file. Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.54:53 0.0.0.0:* LISTEN 996 12306 101/systemd-resolve tcp 0 0 0.0.0.0:1885 0.0.0.0:* LISTEN 1000 240687 4857/io.sonoff.0 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1000 239390 4815/io.mqtt.0 tcp 0 0 127.0.0.53:53 0.0.0.0:* LISTEN 996 12304 101/systemd-resolve tcp 0 0 0.0.0.0:9001 0.0.0.0:* LISTEN 1000 237188 4623/iobroker.js-co tcp 0 0 0.0.0.0:9000 0.0.0.0:* LISTEN 1000 237195 4623/iobroker.js-co tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 10612 1/init tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 12891 287/master tcp6 0 0 ::1:25 :::* LISTEN 0 12892 287/master tcp6 0 0 :::22 :::* LISTEN 0 12314 1/init tcp6 0 0 :::111 :::* LISTEN 0 10614 1/init tcp6 0 0 :::8081 :::* LISTEN 1000 237339 4641/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1000 242532 5351/io.web.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 1000 240819 4887/io.chromecast. udp 0 0 127.0.0.54:53 0.0.0.0:* 996 12305 101/systemd-resolve udp 0 0 127.0.0.53:53 0.0.0.0:* 996 12303 101/systemd-resolve udp 0 0 192.168.1.67:68 0.0.0.0:* 998 15897654 93/systemd-networkd udp 0 0 0.0.0.0:111 0.0.0.0:* 0 10613 1/init udp6 0 0 :::111 :::* 0 10615 1/init *** Log File - Last 25 Lines *** 2024-12-29 12:25:22.449 - error: fritzdect.0 (358172) try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') 2024-12-29 12:25:32.450 - error: fritzdect.0 (358172) try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') 2024-12-29 12:25:42.456 - error: fritzdect.0 (358172) try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') 2024-12-29 12:25:52.450 - error: fritzdect.0 (358172) try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') 2024-12-29 12:25:55.734 - info: linux-control.0 (5366) getting data from ioBrokerSlave_2 (192.168.1.57:22) 2024-12-29 12:25:55.738 - info: linux-control.0 (5366) [getConnection] Host 'ioBrokerSlave_2' (192.168.1.57:22) seems not to be online 2024-12-29 12:26:02.457 - error: fritzdect.0 (358172) try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') 2024-12-29 12:26:12.475 - error: fritzdect.0 (358172) try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') 2024-12-29 12:26:22.457 - error: fritzdect.0 (358172) try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') 2024-12-29 12:26:32.489 - error: fritzdect.0 (358172) try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') 2024-12-29 12:26:42.484 - error: fritzdect.0 (358172) try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') 2024-12-29 12:26:52.464 - error: fritzdect.0 (358172) try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') 2024-12-29 12:26:55.743 - info: linux-control.0 (5366) getting data from ioBrokerSlave_2 (192.168.1.57:22) 2024-12-29 12:26:55.746 - info: linux-control.0 (5366) [getConnection] Host 'ioBrokerSlave_2' (192.168.1.57:22) seems not to be online 2024-12-29 12:27:02.458 - error: fritzdect.0 (358172) try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') 2024-12-29 12:27:12.460 - error: fritzdect.0 (358172) try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') 2024-12-29 12:27:22.487 - error: fritzdect.0 (358172) try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') 2024-12-29 12:27:32.465 - error: fritzdect.0 (358172) try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') 2024-12-29 12:27:42.467 - error: fritzdect.0 (358172) try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') 2024-12-29 12:27:52.505 - error: fritzdect.0 (358172) try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') 2024-12-29 12:27:55.753 - info: linux-control.0 (5366) getting data from ioBrokerSlave_2 (192.168.1.57:22) 2024-12-29 12:27:55.756 - info: linux-control.0 (5366) [getConnection] Host 'ioBrokerSlave_2' (192.168.1.57:22) seems not to be online 2024-12-29 12:28:02.475 - error: fritzdect.0 (358172) try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') 2024-12-29 12:28:12.464 - error: fritzdect.0 (358172) try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') 2024-12-29 12:28:22.468 - error: fritzdect.0 (358172) try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace')============ Mark until here for C&P =============
Adapter Konfiguration? Was benötigst du da? Screenshot?Moin aus dem Norden…
-
========== Start marking the full check here =========== ```bash Script v.2024-10-19 *** BASE SYSTEM *** Static hostname: ioBrokerMasterLXC Icon name: computer-container Chassis: container ☐ Virtualization: lxc Operating System: Ubuntu 23.04 Kernel: Linux 6.8.12-5-pve Architecture: x86-64 Firmware Version: F5 OS is similar to: debian model name : Intel(R) Core(TM) i5-4200U CPU @ 1.60GHz Docker : false Virtualization : lxc Kernel : x86_64 Userland : 64 bit Systemuptime and Load: 12:27:59 up 8 days, 14:36, 2 users, load average: 1.17, 0.48, 0.21 CPU threads: 1 *** LIFE CYCLE STATUS *** Ubuntu Release codenamed 'lunar' reached its END OF LIFE and needs to be updated to the latest LTS release 'noble' NOW! *** TIME AND TIMEZONES *** Local time: Sun 2024-12-29 12:27:59 CET Universal time: Sun 2024-12-29 11:27:59 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: inactive RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': root HOME=/root GROUPS=root User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth A default user should be created! This user will be enabled to temporarily switch to root via 'sudo'! A root login is not required in most Linux Distributions. Run 'iobroker fix' or use the system tools to create a user. *** DISPLAY-SERVER SETUP *** Display-Server: false Desktop: Terminal: tty System is booting into 'graphical.target'. Usually a server is running in 'multi-user.target'. Please set BootTarget to 'multi-user.target' or run 'iobroker fix' *** MEMORY *** total used free shared buff/cache available Mem: 3.2G 1.4G 274M 94K 1.6G 1.8G Swap: 536M 244M 292M Total: 3.8G 1.6G 567M Active iob-Instances: 23 3072 M total memory 1326 M used memory 1241 M active memory 1423 M inactive memory 261 M free memory 0 M buffer memory 1484 M swap cache 512 M total swap 232 M used swap 279 M free swap *** top - Table Of Processes *** top - 12:27:59 up 8 days, 14:36, 2 users, load average: 1.17, 0.48, 0.21 Tasks: 50 total, 1 running, 49 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 0.0 sy, 0.0 ni,100.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3072.0 total, 259.3 free, 1327.8 used, 1485.2 buff/cache MiB Swap: 512.0 total, 279.0 free, 233.0 used. 1744.2 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * run-rpc_pipefs.mount loaded failed failed RPC Pipe File System LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** DMESG CRITICAL ERRORS *** dmesg: read kernel buffer failed: Operation not permitted No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/loop0 ext4 19G 13G 5.2G 71% / none tmpfs 492K 4.0K 488K 1% /dev efivarfs efivarfs 128K 96K 28K 78% /sys/firmware/efi/efivars tmpfs tmpfs 7.8G 0 7.8G 0% /dev/shm tmpfs tmpfs 3.2G 140K 3.2G 1% /run tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs tmpfs 1.6G 0 1.6G 0% /run/user/0 Messages concerning ext4 filesystem in dmesg: dmesg: read kernel buffer failed: Operation not permitted Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/loop0 ext4 rw,relatime Files in neuralgic directories: /var: 521M /var/ 233M /var/lib 164M /var/log 163M /var/log/journal/770cb772b2aa4c2a87f7acb50f04c359 163M /var/log/journal Archived and active journals take up 162.4M in the file system. /opt/iobroker/backups: 315M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 7.7G /opt/iobroker/iobroker-data/ 6.9G /opt/iobroker/iobroker-data/history 794M /opt/iobroker/iobroker-data/files 617M /opt/iobroker/iobroker-data/files/javascript.admin 560M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map 14M /opt/iobroker/iobroker-data/objects.jsonl 12M /opt/iobroker/iobroker-data/files/backitup.admin/static/js/main.bd24114f.js 9.6M /opt/iobroker/iobroker-data/history/20240312/history.ble.1.c4~7c~8d~6b~f9~60.rssi.json 9.5M /opt/iobroker/iobroker-data/history/20240311/history.ble.1.c4~7c~8d~6b~f9~60.rssi.json USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** NodeJS-Installation *** /usr/bin/nodejs v18.20.5 /usr/bin/node v18.20.5 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.29.4 nodejs: Installed: 18.20.5-1nodesource1 Candidate: 18.20.5-1nodesource1 Version table: *** 18.20.5-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 100 /var/lib/dpkg/status 18.20.4-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.20.3-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.20.2-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.20.1-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.20.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.19.1-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.19.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.18.2-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.18.1-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.18.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.17.1-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.17.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.16.1-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.16.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.15.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.14.2-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.14.1-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.14.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.13.0+dfsg1-1ubuntu2 500 500 http://archive.ubuntu.com/ubuntu lunar/universe amd64 Packages 18.13.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.12.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.11.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.10.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.9.1-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.9.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.8.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.7.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.6.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.5.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.4.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.3.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.2.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.1.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.0.0-1nodesource1 600 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: ioBroker-Slave2 ioBroker-Slave2 (version: 7.0.3, hostname: ioBroker-Slave2, alive, uptime: 741772) ioBrokerMasterLXC ioBrokerMasterLXC (version: 7.0.3, hostname: ioBrokerMasterLXC, alive, uptime: 739393) Core adapters versions js-controller: 7.0.3 admin: 7.1.5 javascript: 8.8.3 nodejs modules from github: 0 Adapter State + system.adapter.admin.0 : admin : ioBrokerMasterLXC - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : ioBroker-Slave2 - enabled + system.adapter.backitup.1 : backitup : ioBrokerMasterLXC - enabled system.adapter.ble.0 : ble : ioBrokerMasterLXC - disabled + system.adapter.ble.1 : ble : ioBroker-Slave2 - enabled + system.adapter.chromecast.0 : chromecast : ioBrokerMasterLXC - enabled + system.adapter.cloud.0 : cloud : ioBrokerMasterLXC - enabled + system.adapter.discovery.0 : discovery : ioBrokerMasterLXC - enabled + system.adapter.email.0 : email : ioBrokerMasterLXC - enabled system.adapter.flot.0 : flot : ioBrokerMasterLXC - disabled + system.adapter.fritzbox.0 : fritzbox : ioBrokerMasterLXC - enabled + system.adapter.fritzdect.0 : fritzdect : ioBrokerMasterLXC - enabled + system.adapter.history.0 : history : ioBrokerMasterLXC - enabled system.adapter.ical.0 : ical : ioBrokerMasterLXC - enabled + system.adapter.info.0 : info : ioBrokerMasterLXC - enabled + system.adapter.javascript.0 : javascript : ioBrokerMasterLXC - enabled + system.adapter.linux-control.0 : linux-control : ioBrokerMasterLXC - enabled + system.adapter.mqtt.0 : mqtt : ioBrokerMasterLXC - enabled, port: 1883, bind: 0.0.0.0 system.adapter.net-tools.0 : net-tools : ioBrokerMasterLXC - disabled system.adapter.pi-hole.0 : pi-hole : ioBrokerMasterLXC - disabled + system.adapter.ping.0 : ping : ioBrokerMasterLXC - enabled + system.adapter.proxmox.0 : proxmox : ioBrokerMasterLXC - enabled, port: 8006 + system.adapter.rpi2.1 : rpi2 : ioBroker-Slave2 - enabled + system.adapter.sayit.0 : sayit : ioBrokerMasterLXC - enabled + system.adapter.sonoff.0 : sonoff : ioBrokerMasterLXC - enabled, port: 1885, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : ioBrokerMasterLXC - enabled, port: 8443, bind: 0.0.0.0 system.adapter.vis-2-widgets-energy.0 : vis-2-widgets-energy : ioBrokerMasterLXC - disabled system.adapter.vis-2-widgets-gauges.0 : vis-2-widgets-gauges : ioBrokerMasterLXC - disabled system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: ioBrokerMasterLXC - disabled system.adapter.vis.0 : vis : ioBrokerMasterLXC - enabled + system.adapter.web.0 : web : ioBrokerMasterLXC - enabled, port: 8082, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : ioBrokerMasterLXC - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.mqtt.0 : mqtt : ioBrokerMasterLXC - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.proxmox.0 : proxmox : ioBrokerMasterLXC - enabled, port: 8006 + system.adapter.sonoff.0 : sonoff : ioBrokerMasterLXC - enabled, port: 1885, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : ioBrokerMasterLXC - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : ioBrokerMasterLXC - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): stable Upgrade policy: none Installed ioBroker-Instances Used repository: stable Adapter "admin" : 7.1.5 , installed 7.1.5 Adapter "backitup" : 3.0.25 , installed 3.0.25 Adapter "ble" : 0.14.0 , installed 0.14.0 Adapter "chromecast" : 4.0.0 , installed 4.0.0 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "email" : 1.3.1 , installed 1.3.1 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fritzbox" : 0.6.0 , installed 0.6.0 Adapter "fritzdect" : 2.5.11 , installed 2.5.11 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "ical" : 1.16.1 , installed 1.16.1 Adapter "javascript" : 8.8.3 , installed 8.8.3 Controller "js-controller": 7.0.6 , installed 7.0.3 [Updatable] Adapter "linux-control": 1.1.5 , installed 1.1.5 Adapter "mqtt" : 6.1.2 , installed 6.1.2 Adapter "net-tools" : 1.0.11 , installed 1.0.11 Adapter "pi-hole" : 1.3.6 , installed 1.3.6 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "proxmox" : 2.3.0 , installed 2.3.0 Adapter "sayit" : 5.0.0 , installed 5.0.0 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "sonoff" : 3.1.2 , installed 3.1.2 Adapter "telegram" : 3.9.0 , installed 3.9.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-2-widgets-energy": 1.0.2, installed 1.0.2 Adapter "vis-2-widgets-gauges": 1.1.0, installed 1.1.0 Adapter "vis-2-widgets-material": 1.4.10, installed 1.4.10 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "ws" : 2.6.2 , installed 2.6.2 Objects and States Please stand by - This may take a while Objects: 3051 States: 2539 *** OS-Repositories and Updates *** E: The repository 'http://archive.ubuntu.com/ubuntu lunar Release' no longer has a Release file. E: The repository 'http://archive.ubuntu.com/ubuntu lunar-updates Release' no longer has a Release file. E: The repository 'http://archive.ubuntu.com/ubuntu lunar-security Release' no longer has a Release file. Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.54:53 0.0.0.0:* LISTEN 996 12306 101/systemd-resolve tcp 0 0 0.0.0.0:1885 0.0.0.0:* LISTEN 1000 240687 4857/io.sonoff.0 tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1000 239390 4815/io.mqtt.0 tcp 0 0 127.0.0.53:53 0.0.0.0:* LISTEN 996 12304 101/systemd-resolve tcp 0 0 0.0.0.0:9001 0.0.0.0:* LISTEN 1000 237188 4623/iobroker.js-co tcp 0 0 0.0.0.0:9000 0.0.0.0:* LISTEN 1000 237195 4623/iobroker.js-co tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 10612 1/init tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 12891 287/master tcp6 0 0 ::1:25 :::* LISTEN 0 12892 287/master tcp6 0 0 :::22 :::* LISTEN 0 12314 1/init tcp6 0 0 :::111 :::* LISTEN 0 10614 1/init tcp6 0 0 :::8081 :::* LISTEN 1000 237339 4641/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1000 242532 5351/io.web.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 1000 240819 4887/io.chromecast. udp 0 0 127.0.0.54:53 0.0.0.0:* 996 12305 101/systemd-resolve udp 0 0 127.0.0.53:53 0.0.0.0:* 996 12303 101/systemd-resolve udp 0 0 192.168.1.67:68 0.0.0.0:* 998 15897654 93/systemd-networkd udp 0 0 0.0.0.0:111 0.0.0.0:* 0 10613 1/init udp6 0 0 :::111 :::* 0 10615 1/init *** Log File - Last 25 Lines *** 2024-12-29 12:25:22.449 - error: fritzdect.0 (358172) try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') 2024-12-29 12:25:32.450 - error: fritzdect.0 (358172) try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') 2024-12-29 12:25:42.456 - error: fritzdect.0 (358172) try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') 2024-12-29 12:25:52.450 - error: fritzdect.0 (358172) try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') 2024-12-29 12:25:55.734 - info: linux-control.0 (5366) getting data from ioBrokerSlave_2 (192.168.1.57:22) 2024-12-29 12:25:55.738 - info: linux-control.0 (5366) [getConnection] Host 'ioBrokerSlave_2' (192.168.1.57:22) seems not to be online 2024-12-29 12:26:02.457 - error: fritzdect.0 (358172) try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') 2024-12-29 12:26:12.475 - error: fritzdect.0 (358172) try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') 2024-12-29 12:26:22.457 - error: fritzdect.0 (358172) try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') 2024-12-29 12:26:32.489 - error: fritzdect.0 (358172) try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') 2024-12-29 12:26:42.484 - error: fritzdect.0 (358172) try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') 2024-12-29 12:26:52.464 - error: fritzdect.0 (358172) try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') 2024-12-29 12:26:55.743 - info: linux-control.0 (5366) getting data from ioBrokerSlave_2 (192.168.1.57:22) 2024-12-29 12:26:55.746 - info: linux-control.0 (5366) [getConnection] Host 'ioBrokerSlave_2' (192.168.1.57:22) seems not to be online 2024-12-29 12:27:02.458 - error: fritzdect.0 (358172) try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') 2024-12-29 12:27:12.460 - error: fritzdect.0 (358172) try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') 2024-12-29 12:27:22.487 - error: fritzdect.0 (358172) try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') 2024-12-29 12:27:32.465 - error: fritzdect.0 (358172) try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') 2024-12-29 12:27:42.467 - error: fritzdect.0 (358172) try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') 2024-12-29 12:27:52.505 - error: fritzdect.0 (358172) try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') 2024-12-29 12:27:55.753 - info: linux-control.0 (5366) getting data from ioBrokerSlave_2 (192.168.1.57:22) 2024-12-29 12:27:55.756 - info: linux-control.0 (5366) [getConnection] Host 'ioBrokerSlave_2' (192.168.1.57:22) seems not to be online 2024-12-29 12:28:02.475 - error: fritzdect.0 (358172) try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') 2024-12-29 12:28:12.464 - error: fritzdect.0 (358172) try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') 2024-12-29 12:28:22.468 - error: fritzdect.0 (358172) try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace')============ Mark until here for C&P =============
Adapter Konfiguration? Was benötigst du da? Screenshot?@pjo123456 sagte in fritzdect Adapter Fehler alle 10 Sekunden im Log:
Adapter Konfiguration? Was benötigst du da? Screenshot?
ja
- Ubuntu-Version ist nur eine "Zwischenversion" - bereits abgelaufen. Da muss was aktuelles her, ggfs. eine LTS Version
- nodejs - empfohlen V20.x
- Kernel Fehler.
Ro75.
-
@ro75 Hier die Konfig vom Adapter (ich hoffe es ist das richtige):
zu 1.: Da muss ich mich erst belesen, wie ich das updaten muss
zu 2.: werde ich machen
zu 3.: kein Plan@pjo123456 setze bei "excludes" dort bei allen 3 den Haken.
Ro75.
-
@pjo123456 setze bei "excludes" dort bei allen 3 den Haken.
Ro75.
-
@pjo123456 du hast Master / Slave - Betrieb?
Ro75.
-
@pjo123456 du hast Master / Slave - Betrieb?
Ro75.
-
@ro75 Ja. Master im LXC Container, Slave auf Raspi. Der Slave hat aber nur ein paar Bluetooth Thermometer.
Bist Du das mit dem Issue?
https://github.com/foxthefox/ioBroker.fritzdect/issues/599
Edit: Wenn nein, dann häng Dich mit ran.
Dann brauchen wir hier nicht weiter suchen und Du kannst Dein System solange auf Stand bringen . -
Bist Du das mit dem Issue?
https://github.com/foxthefox/ioBroker.fritzdect/issues/599
Edit: Wenn nein, dann häng Dich mit ran.
Dann brauchen wir hier nicht weiter suchen und Du kannst Dein System solange auf Stand bringen .@haselchen Moin!
Habe zwar auch ein Issue aufgemacht aber wegen einem anderen Problem. Aber vielleicht hängt das alles damit zusammen.
Issue 598: (https://github.com/foxthefox/ioBroker.fritzdect/issues/598)
-
Ich hänge mich mal hier dran. Folgende Erlebnisse:
Nach dem Update meiner Fritzbox 7590ax auf FritzOS v8.02 gabs Probleme, die durch die Version 2.5.12 aus dem Beta repository behoben zu sein schienen.Was ich aber erst sehr viel später festgestellt habe ist die Tatsache, dass der iobroker fritzdect Adapter v2.5.12 anscheinen per API calls die Box irgendwie zumüllt und das zur Folge hat, dass das UI der Fritzbox quasi unbrauchbar langsam wird. Selbst zum Login auf dem UI kann man 2 Minuten warten, bis sich der Screen aufgebaut hat.
Im Log finde ich derweil sowas hier unter v2.5.12, haufenweise:
2025-02-27 00:03:47.033 - [31merror[39m: fritzdect.0 (800200) --------------- error calling the fritzbox ----------- 2025-02-27 00:03:47.034 - [31merror[39m: fritzdect.0 (800200) API msg => error calling executeCommand 2025-02-27 00:03:47.034 - [31merror[39m: fritzdect.0 (800200) API funct => login_SID 2025-02-27 00:03:47.034 - [31merror[39m: fritzdect.0 (800200) no response part in returned error message 2025-02-27 00:03:47.034 - [31merror[39m: fritzdect.0 (800200) API err => {"msg":"failed to get challenge","function":"get_sid","error":{"msg":"error http.request","function":"get_login_state","error":{"errno":-110,"code":"ETIMEDOUT","syscall":"connect","address":"192.168.178.1","port":80}}} 2025-02-27 00:04:07.513 - [31merror[39m: fritzdect.0 (800200) --------------- error calling the fritzbox ----------- 2025-02-27 00:04:07.513 - [31merror[39m: fritzdect.0 (800200) API msg => error calling executeCommand 2025-02-27 00:04:07.513 - [31merror[39m: fritzdect.0 (800200) API funct => login_SID 2025-02-27 00:04:07.513 - [31merror[39m: fritzdect.0 (800200) no response part in returned error message 2025-02-27 00:04:07.514 - [31merror[39m: fritzdect.0 (800200) API err => {"msg":"failed to get challenge","function":"get_sid","error":{"msg":"error http.request","function":"get_login_state","error":{"errno":-110,"code":"ETIMEDOUT","syscall":"connect","address":"192.168.178.1","port":80}}} 2025-02-27 00:04:07.514 - [33mwarn[39m: fritzdect.0 (800200) [Polling] <== TypeError: Cannot read properties of undefined (reading 'replace')Erst durch den AVM Support ist mir der Tip mit dem Einfluss des Raspi mit dem iobroker bewusst geworden und die Fehler.
Ich habe dann denn Adapter wieder auf 2.5.11 gedowngraded und schwups läuft das UI der Fritzbox wieder normal.Leider ist damit dann wieder der Adapter disfunktional. Die DP werden nicht aktualisiert und das Log wird nach 2-3 Minuten mit "try/catch issue updating device in updateDevices TypeError" Fehler zugespammt (unter v.2.5.12).
fritzdect.0 2025-02-27 17:58:58.772 error try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') fritzdect.0 2025-02-27 17:58:53.820 error try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') fritzdect.0 2025-02-27 17:58:48.802 error try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') fritzdect.0 2025-02-27 17:58:43.881 error try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') fritzdect.0 2025-02-27 17:58:39.839 error try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') fritzdect.0 2025-02-27 17:58:33.011 info going over to cyclic polling, messages to poll activity only in debug-mode fritzdect.0 2025-02-27 17:58:33.011 info finished initial updating devices/groups fritzdect.0 2025-02-27 17:58:33.001 error try/catch issue updating device in updateDevices TypeError: Cannot read properties of undefined (reading 'replace') fritzdect.0 2025-02-27 17:58:32.070 info start initial updating devices/groups fritzdect.0 2025-02-27 17:58:32.069 info finished creating routines (if any) fritzdect.0 2025-02-27 17:58:31.903 info CREATE Routines 6 fritzdect.0 2025-02-27 17:58:31.086 info start creating routines fritzdect.0 2025-02-27 17:58:31.085 info routines are used(false) fritzdect.0 2025-02-27 17:58:31.085 info finished creating templates (if any) fritzdect.0 2025-02-27 17:58:30.695 info CREATE Templates 30 fritzdect.0 2025-02-27 17:58:30.158 info start creating templates fritzdect.0 2025-02-27 17:58:30.157 info templates are used(false) fritzdect.0 2025-02-27 17:58:30.156 info finished creating devices/groups (if any) fritzdect.0 2025-02-27 17:58:30.155 error iob err => undefined fritzdect.0 2025-02-27 17:58:30.154 error --------------- error calling the fritzbox ----------- fritzdect.0 2025-02-27 17:58:30.152 error try/catch createDevices TypeError: Cannot read properties of undefined (reading 'replace') fritzdect.0 2025-02-27 17:58:30.144 info CREATE Devices 31 fritzdect.0 2025-02-27 17:58:29.126 info start creating devices/groups fritzdect.0 2025-02-27 17:58:29.124 info finished creating global values fritzdect.0 2025-02-27 17:58:29.062 info create Main object global channel list fritzdect.0 2025-02-27 17:58:29.061 info ____________________________________________ fritzdect.0 2025-02-27 17:58:29.060 info start creating global values fritzdect.0 2025-02-27 17:58:29.059 info the rights are : {"Rights":{"Name":"HomeAuto","Access":"2"}} fritzdect.0 2025-02-27 17:58:28.351 info checking user permissions fritzdect.0 2025-02-27 17:57:24.618 info fritzdect uses USER: iobroker fritzdect.0 2025-02-27 17:57:24.574 info fritzdect entered ready fritzdect.0 2025-02-27 17:57:24.547 info starting. Version 2.5.11 in /opt/iobroker/node_modules/iobroker.fritzdect, node: v20.18.2, js-controller: 7.0.6 fritzdect.0 2025-02-27 17:57:11.032 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason fritzdect.0 2025-02-27 17:57:11.031 info terminating fritzdect.0 2025-02-27 17:57:11.030 info cleaned everything up... fritzdect.0 2025-02-27 17:57:11.028 info Got terminate signal TERMINATE_YOURSELFIch habe also die Wahl zwischen unbenutzbarer Fritzbox-UI, aber aktuellen DP in iobroker ODER funktionierender Fritzbox UI und fritzdect-Adapter kaputt.
Tips?
-
@bertderkleine said in fritzdect Adapter Fehler alle 10 Sekunden im Log:
Tips?
Ich habe gerade auf Github gesehen, dass es eine Version 2.6.1 gibt. Die ist als debug Version ladbar. Mit der ist der Adapter wieder mit fritzboxOS 8.02 arbeitsfähig. Vielleicht geht es bei Dir damit auch.
-
@bertderkleine said in fritzdect Adapter Fehler alle 10 Sekunden im Log:
Tips?
Ich habe gerade auf Github gesehen, dass es eine Version 2.6.1 gibt. Die ist als debug Version ladbar. Mit der ist der Adapter wieder mit fritzboxOS 8.02 arbeitsfähig. Vielleicht geht es bei Dir damit auch.
@peter-c
Danke Dir. Ist einen Versuch wert. -
@bertderkleine said in fritzdect Adapter Fehler alle 10 Sekunden im Log:
Tips?
Ich habe gerade auf Github gesehen, dass es eine Version 2.6.1 gibt. Die ist als debug Version ladbar. Mit der ist der Adapter wieder mit fritzboxOS 8.02 arbeitsfähig. Vielleicht geht es bei Dir damit auch.
@peter-c sagte in fritzdect Adapter Fehler alle 10 Sekunden im Log:
Ich habe gerade auf Github gesehen, dass es eine Version 2.6.1 gibt. Die ist als debug Version ladbar. Mit der ist der Adapter wieder mit fritzboxOS 8.02 arbeitsfähig. Vielleicht geht es bei Dir damit auch.
Es scheint, als ob die v2.6.1 mit FritzOS v8.02 so tut, wie es soll.
Danke Dir für den Tip! -
@peter-c sagte in fritzdect Adapter Fehler alle 10 Sekunden im Log:
Ich habe gerade auf Github gesehen, dass es eine Version 2.6.1 gibt. Die ist als debug Version ladbar. Mit der ist der Adapter wieder mit fritzboxOS 8.02 arbeitsfähig. Vielleicht geht es bei Dir damit auch.
Es scheint, als ob die v2.6.1 mit FritzOS v8.02 so tut, wie es soll.
Danke Dir für den Tip!@bertderkleine said in fritzdect Adapter Fehler alle 10 Sekunden im Log:
Danke Dir für den Tip!
Gerne
-
@bertderkleine said in fritzdect Adapter Fehler alle 10 Sekunden im Log:
Tips?
Ich habe gerade auf Github gesehen, dass es eine Version 2.6.1 gibt. Die ist als debug Version ladbar. Mit der ist der Adapter wieder mit fritzboxOS 8.02 arbeitsfähig. Vielleicht geht es bei Dir damit auch.
@peter-c Hallo, ich bin Anfänger bei iobroker deshalb meine Frage, da meine Fritzbox nach Update auf ios Version 8.02 auch nicht mehr läuft, wie kann ich die Version 2.6.1 von Fritzbox dect bekommen und installieren?
Wie gessagt absoluter Neuling, die Update habe ich sonst wenn Verfügbar über iobroker installiert.Vielen dank für eure Hilfe.
Gruß Detlef
-
@peter-c sagte in fritzdect Adapter Fehler alle 10 Sekunden im Log:
Ich habe gerade auf Github gesehen, dass es eine Version 2.6.1 gibt. Die ist als debug Version ladbar. Mit der ist der Adapter wieder mit fritzboxOS 8.02 arbeitsfähig. Vielleicht geht es bei Dir damit auch.
Es scheint, als ob die v2.6.1 mit FritzOS v8.02 so tut, wie es soll.
Danke Dir für den Tip!@bertderkleine sagte in fritzdect Adapter Fehler alle 10 Sekunden im Log:
@peter-c sagte in fritzdect Adapter Fehler alle 10 Sekunden im Log:
Ich habe gerade auf Github gesehen, dass es eine Version 2.6.1 gibt. Die ist als debug Version ladbar. Mit der ist der Adapter wieder mit fritzboxOS 8.02 arbeitsfähig. Vielleicht geht es bei Dir damit auch.
Es scheint, als ob die v2.6.1 mit FritzOS v8.02 so tut, wie es soll.
Danke Dir für den Tip!Kannst du mir bitte mal den link geben zur 2.6.1 habe das gleiche Problem.
-
@bertderkleine sagte in fritzdect Adapter Fehler alle 10 Sekunden im Log:
@peter-c sagte in fritzdect Adapter Fehler alle 10 Sekunden im Log:
Ich habe gerade auf Github gesehen, dass es eine Version 2.6.1 gibt. Die ist als debug Version ladbar. Mit der ist der Adapter wieder mit fritzboxOS 8.02 arbeitsfähig. Vielleicht geht es bei Dir damit auch.
Es scheint, als ob die v2.6.1 mit FritzOS v8.02 so tut, wie es soll.
Danke Dir für den Tip!Kannst du mir bitte mal den link geben zur 2.6.1 habe das gleiche Problem.
@walter-o und @Detlef-Meissner : Ich glaube er meint die NPM-Version vom "fritzdect"-Adapter. Ich hatte das gleiche Problem wie ihr und konnte es mit der besagten NPM-Version 2.6.0 vom fritzdect-Adapter lösen.
- Dazu deinstalliert ihr erstmal den offiziellen Adapter: Adapter > fritzdect > Adapter löschen
- Weiterhin im Reiter "Adapter" auf den "Expertenmodus" umschalten (Kopfsymbol oben in der Leiste)
- Daraufhin seht ihr das Katzensymbol direkt unterhalb des Expertenmodus-Symbols. Nennt sich "Installieren aus eigener URL"
- Standardmäßig sollte dort bereits "von NPM" ausgewählt sein, so das ihr aus der DropDown-Liste nur noch "fritzdect" wählen und suchen müsst.
- Auf "Installieren" klicken
- Im Nachgang noch eine neue Instanz für den Adapter anlegen
423
Online32.4k
Benutzer81.5k
Themen1.3m
Beiträge