Test Adapter ta-blnet NPM/Latest"
-
@weberk sagte in Test Adapter ta-blnet NPM/Latest":
Ist noch ein wenig U-Boot.
aber anscheinend schon einigermaßen dicht.
Adapter wird grün und die konfigurierten Daten kommen auch an, Objekte/DP's werden angelegt
Im log steht noch eine Warnung wegen polling (eingestellt auf 70s)2024-12-18 17:42:24.320 - info: ta-blnet.0 (1112004) starting. Version 1.0.31 (non-npm: weberk/ioBroker.ta-blnet#1ab69c07b805bd0cbc34e1942ef8ffa2a4305886) in /opt/iobroker/node_modules/iobroker.ta-blnet, node: v20.18.1, js-controller: 7.0.3 2024-12-18 17:42:24.326 - info: ta-blnet.0 (1112004) config ip_address: 192.168.178.204 2024-12-18 17:42:24.326 - info: ta-blnet.0 (1112004) config port: 80 2024-12-18 17:42:24.326 - info: ta-blnet.0 (1112004) config poll_interval: 70 2024-12-18 17:42:24.326 - info: ta-blnet.0 (1112004) expert_username: admin 2024-12-18 17:42:24.326 - info: ta-blnet.0 (1112004) expert_password: admin 2024-12-18 17:42:24.326 - info: ta-blnet.0 (1112004) selected_ta_logger: CMI 2024-12-18 17:42:24.326 - info: ta-blnet.0 (1112004) JavaScript Configuration Object: {"requests":[{"can_node_number":32,"data_objects":"I,O,D,Na,Nd,La,Ld"}]} 2024-12-18 17:43:34.347 - info: ta-blnet.0 (1112004) CAN Node Numbers Array: [32] 2024-12-18 17:43:36.361 - info: ta-blnet.0 (1112004) OK: 0 - OK 2024-12-18 17:43:36.362 - info: ta-blnet.0 (1112004) readSystemConfiguration succeeded. 2024-12-18 17:43:36.490 - warn: ta-blnet.0 (1112004) TOO MANY REQUESTS: Only one request per minute is permitted (4 - TOO MANY REQUESTS) 2024-12-18 17:44:38.601 - info: ta-blnet.0 (1112004) OK: 0 - OK 2024-12-18 17:44:38.608 - warn: ta-blnet.0 (1112004) TOO MANY REQUESTS: Only one request per minute is permitted (4 - TOO MANY REQUESTS)und noch die Objekte mit plausiblen Werten
Schade wegen dem Polling mit 60s...da ist der Modbus schneller.
Aber gute Arbeit. Wenn ich noch etwas probieren soll gib Bescheid
VG
Ulli -
@ullij , danke für die positive Rückmeldung.
Irgendwie passt die Fehlermeldung nicht ganz zu der im Abstand von 62 Sekunden verschickten Wiederholung. Ich habe daher die Wiederholungen jetzt dynamisiert, so dass sie mit 60 Sekunden Wartezeit beginnen und dann stets 12 Sekunden länger warten.2024-12-18 17:43:36.490 - warn: ta-blnet.0 (1112004) TOO MANY REQUESTS: Only one request per minute is permitted (4 - TOO MANY REQUESTS) 2024-12-18 17:44:38.608 - warn: ta-blnet.0 (1112004) TOO MANY REQUESTS: Only one request per minute is permitted (4 - TOO MANY REQUESTS)Wärs Dir möglich nochmal die Version auf v1.0.32 zu aktualisieren und die Instanz in den Debug-Modus zu versetzen, um besser dem Verlauf der Fehlerkompensation folgenen zu können? 5 Minuten Log sollten das Interaktionsmuster offenlegen können.
-
@weberk
mache ich morgen früh, kein Problem -
@weberk sagte in Test Adapter ta-blnet NPM/Latest":
Wärs Dir möglich nochmal die Version auf v1.0.32 zu aktualisieren und die Instanz in den Debug-Modus zu versetzen, um besser dem Verlauf der Fehlerkompensation folgenen zu können? 5 Minuten Log sollten das Interaktionsmuster offenlegen können.
Bitte sehr...-
die Modbus Instanz für parallelen Zugriff auf das CMI hatte ich abgeschaltet
-
die vorhandenen Datenpunkte werden nicht aktualisiert. Ich hatte den "Logging Analog":[{"Number":1,"AD":"A","Value":{"Value":492,"Unit":"60"}} im Influxadapter aktiviert. Erster Wert "492" (Uhrzeit der UVR) beim Start der Instanz, da bleibt der DP auch, obwohl bei den Folgeabfragen andere Werte kommen.
-
die Zeitstempel der anderen vorhandenen Objekte werden bei Adapterstart aktualisiert, danach nicht mehr
kann gerne weiter testen
VG
Ulli2024-12-20 08:03:47.705 - info: host.lxcIoBSlave instance system.adapter.ta-blnet.0 in version "1.0.32" (non-npm: weberk/ioBroker.ta-blnet#e4cd94e656cc1122d5aed06c63aa6ce61ee01404) started with pid 3250289 2024-12-20 08:03:47.996 - debug: ta-blnet.0 (3250289) Redis Objects: Use Redis connection: 192.168.178.9:9001 2024-12-20 08:03:48.012 - debug: ta-blnet.0 (3250289) Objects client ready ... initialize now 2024-12-20 08:03:48.059 - debug: ta-blnet.0 (3250289) Objects create System PubSub Client 2024-12-20 08:03:48.059 - debug: ta-blnet.0 (3250289) Objects create User PubSub Client 2024-12-20 08:03:48.130 - debug: ta-blnet.0 (3250289) Objects client initialize lua scripts 2024-12-20 08:03:48.132 - debug: ta-blnet.0 (3250289) Objects connected to redis: 192.168.178.9:9001 2024-12-20 08:03:48.154 - debug: ta-blnet.0 (3250289) Redis States: Use Redis connection: 192.168.178.9:9000 2024-12-20 08:03:48.188 - debug: ta-blnet.0 (3250289) States create System PubSub Client 2024-12-20 08:03:48.188 - debug: ta-blnet.0 (3250289) States create User PubSub Client 2024-12-20 08:03:48.250 - debug: ta-blnet.0 (3250289) States connected to redis: 192.168.178.9:9000 2024-12-20 08:03:48.398 - info: ta-blnet.0 (3250289) starting. Version 1.0.32 (non-npm: weberk/ioBroker.ta-blnet#e4cd94e656cc1122d5aed06c63aa6ce61ee01404) in /opt/iobroker/node_modules/iobroker.ta-blnet, node: v20.18.1, js-controller: 7.0.3 2024-12-20 08:03:48.404 - info: ta-blnet.0 (3250289) config ip_address: 192.168.178.204 2024-12-20 08:03:48.404 - info: ta-blnet.0 (3250289) config port: 80 2024-12-20 08:03:48.404 - info: ta-blnet.0 (3250289) config poll_interval: 70 2024-12-20 08:03:48.404 - info: ta-blnet.0 (3250289) expert_username: admin 2024-12-20 08:03:48.405 - info: ta-blnet.0 (3250289) expert_password: admin 2024-12-20 08:03:48.405 - info: ta-blnet.0 (3250289) selected_ta_logger: CMI 2024-12-20 08:03:48.405 - info: ta-blnet.0 (3250289) JavaScript Configuration Object: {"requests":[{"can_node_number":32,"data_objects":"I,O,D,Na,Nd,La,Ld"}]} 2024-12-20 08:03:48.433 - debug: ta-blnet.0 (3250289) onReady: Initialization time logger is the same as in configuration. 2024-12-20 08:04:58.435 - info: ta-blnet.0 (3250289) CAN Node Numbers Array: [32] 2024-12-20 08:04:58.435 - debug: ta-blnet.0 (3250289) readSystemConfiguration reading data for CAN node: 32 2024-12-20 08:04:58.436 - debug: ta-blnet.0 (3250289) fetchJSONDataFromDevice for CAN node: 32 with data_objects: "I,O,D,Na,Nd,La,Ld" 2024-12-20 08:04:58.436 - debug: ta-blnet.0 (3250289) Initiate attempt to fetch JSON data from CMI 2024-12-20 08:04:58.436 - debug: ta-blnet.0 (3250289) Sending request to 192.168.178.204 with options: {"auth":"admin:admin","hostname":"192.168.178.204","port":80,"path":"/INCLUDE/api.cgi?jsonnode=32&jsonparam=I,O,D,Na,Nd,La,Ld","method":"GET"} 2024-12-20 08:04:58.438 - debug: ta-blnet.0 (3250289) Sent request as attempt: 1 2024-12-20 08:04:58.438 - debug: ta-blnet.0 (3250289) Response object on attempt 1: {"data":{},"httpStatusCode":0,"httpStatusMessage":"","debug":""} 2024-12-20 08:05:00.691 - info: ta-blnet.0 (3250289) OK: 0 - OK 2024-12-20 08:05:00.691 - debug: ta-blnet.0 (3250289) fetchJSONDataFromDevice: {"Header":{"Version":7,"Device":"91","Timestamp":1734681900},"Data":{"Inputs":[{"Number":1,"AD":"A","Value":{"Value":42.4,"Unit":"1"}},{"Number":2,"AD":"A","Value":{"Value":37,"Unit":"1"}},{"Number":3,"AD":"A","Value":{"Value":649,"Unit":"3"}},{"Number":4,"AD":"A","Value":{"Value":37.8,"Unit":"1"}},{"Number":5,"AD":"A","Value":{"Value":15.6,"Unit":"1"}},{"Number":6,"AD":"A","Value":{"Value":26.1,"Unit":"1"}}],"Outputs":[{"Number":1,"AD":"D","Value":{"Value":0,"Unit":"43"}},{"Number":2,"AD":"D","Value":{"Value":0,"Unit":"43"}}],"DL-Bus":[{"Number":1,"AD":"A","Value":{"Value":0,"Unit":"3"}},{"Number":2,"AD":"A","Value":{"Value":61.1,"Unit":"8"}},{"Number":3,"AD":"A","Value":{"Value":14.4,"Unit":"1"}},{"Number":4,"AD":"A","Value":{"Value":6.7,"Unit":"1"}}],"Logging Analog":[{"Number":1,"AD":"A","Value":{"Value":492,"Unit":"60"}},{"Number":2,"AD":"A","Value":{"Value":636,"Unit":"3"}},{"Number":16,"AD":"A","Value":{"Value":0,"Unit":"69"}},{"Number":17,"AD":"A","Value":{"Value":0,"Unit":"69"}}],"Logging Digital":[]},"Status":"OK","Status code":0} 2024-12-20 08:05:00.692 - debug: ta-blnet.0 (3250289) deviceInfo is defined as:{"uvr_mode":"1CAN","uvr_type_str":["UVR610"],"uvr_type_code":["91"],"channelNodes":[32],"module_id":"--","firmware_version":"--","transmission_mode":"--"} 2024-12-20 08:05:00.692 - info: ta-blnet.0 (3250289) readSystemConfiguration succeeded. 2024-12-20 08:05:00.692 - debug: ta-blnet.0 (3250289) Setting connection status to: true 2024-12-20 08:05:00.738 - debug: ta-blnet.0 (3250289) logging_analog status: {"A01":{"value":492,"unit":"h"},"A02":{"value":636,"unit":"l/h"},"A16":{"value":0,"unit":"W"},"A17":{"value":0,"unit":"W"}} 2024-12-20 08:05:00.800 - debug: ta-blnet.0 (3250289) logging_digital status: {} 2024-12-20 08:05:00.801 - debug: ta-blnet.0 (3250289) inputs status: {"A01":{"value":42.4,"unit":"°C"},"A02":{"value":37,"unit":"°C"},"A03":{"value":649,"unit":"l/h"},"A04":{"value":37.8,"unit":"°C"},"A05":{"value":15.6,"unit":"°C"},"A06":{"value":26.1,"unit":"°C"}} 2024-12-20 08:05:00.882 - debug: ta-blnet.0 (3250289) outputs status: {"D01":{"value":0,"unit":"ON/OFF"},"D02":{"value":0,"unit":"ON/OFF"}} 2024-12-20 08:05:00.933 - debug: ta-blnet.0 (3250289) network_analog section: undefined 2024-12-20 08:05:00.933 - debug: ta-blnet.0 (3250289) network_digital section: undefined 2024-12-20 08:05:00.938 - debug: ta-blnet.0 (3250289) dl-bus status: {"A01":{"value":0,"unit":"l/h"},"A02":{"value":61.1,"unit":"%"},"A03":{"value":14.4,"unit":"°C"},"A04":{"value":6.7,"unit":"°C"}} 2024-12-20 08:05:01.013 - debug: ta-blnet.0 (3250289) general section: undefined 2024-12-20 08:05:01.014 - debug: ta-blnet.0 (3250289) date section: undefined 2024-12-20 08:05:01.014 - debug: ta-blnet.0 (3250289) time section: undefined 2024-12-20 08:05:01.014 - debug: ta-blnet.0 (3250289) sun section: undefined 2024-12-20 08:05:01.014 - debug: ta-blnet.0 (3250289) electrical_power section: undefined 2024-12-20 08:05:01.014 - debug: ta-blnet.0 (3250289) electrical_power section: undefined 2024-12-20 08:05:01.014 - debug: ta-blnet.0 (3250289) mbus section: undefined 2024-12-20 08:05:01.014 - debug: ta-blnet.0 (3250289) m-bus section: undefined 2024-12-20 08:05:01.014 - debug: ta-blnet.0 (3250289) modbus section: undefined 2024-12-20 08:05:01.014 - debug: ta-blnet.0 (3250289) knx section: undefined 2024-12-20 08:05:01.014 - debug: ta-blnet.0 (3250289) objects for metrics declared. 2024-12-20 08:05:01.014 - debug: ta-blnet.0 (3250289) Initialization succeeded. 2024-12-20 08:05:01.014 - debug: ta-blnet.0 (3250289) Polling state values from devices: [32] 2024-12-20 08:05:01.014 - debug: ta-blnet.0 (3250289) fetchStateValuesFromDevice CMI for CAN node id: 32 2024-12-20 08:05:01.014 - debug: ta-blnet.0 (3250289) fetchJSONDataFromDevice for CAN node: 32 with data_objects: "I,O,D,Na,Nd,La,Ld" 2024-12-20 08:05:01.014 - debug: ta-blnet.0 (3250289) Initiate attempt to fetch JSON data from CMI 2024-12-20 08:05:01.014 - debug: ta-blnet.0 (3250289) Sending request to 192.168.178.204 with options: {"auth":"admin:admin","hostname":"192.168.178.204","port":80,"path":"/INCLUDE/api.cgi?jsonnode=32&jsonparam=I,O,D,Na,Nd,La,Ld","method":"GET"} 2024-12-20 08:05:01.015 - debug: ta-blnet.0 (3250289) Sent request as attempt: 1 2024-12-20 08:05:01.015 - debug: ta-blnet.0 (3250289) Response object on attempt 1: {"data":{},"httpStatusCode":0,"httpStatusMessage":"","debug":""} 2024-12-20 08:05:01.022 - warn: ta-blnet.0 (3250289) TOO MANY REQUESTS: Only one request per minute is permitted (4 - TOO MANY REQUESTS) 2024-12-20 08:05:01.022 - debug: ta-blnet.0 (3250289) fetchJSONDataFromDevice: {"Header":{"Version":7,"Device":"91","Timestamp":1734681903},"Data":{},"Status":"TOO MANY REQUESTS","Status code":4} 2024-12-20 08:05:58.439 - debug: ta-blnet.0 (3250289) Sending request to 192.168.178.204 with options: {"auth":"admin:admin","hostname":"192.168.178.204","port":80,"path":"/INCLUDE/api.cgi?jsonnode=32&jsonparam=I,O,D,Na,Nd,La,Ld","method":"GET"} 2024-12-20 08:05:58.439 - debug: ta-blnet.0 (3250289) Sent request as attempt: 2 2024-12-20 08:05:58.439 - debug: ta-blnet.0 (3250289) Response object on attempt 2: {"data":{},"httpStatusCode":0,"httpStatusMessage":"","debug":""} 2024-12-20 08:06:00.691 - info: ta-blnet.0 (3250289) OK: 0 - OK 2024-12-20 08:06:00.692 - debug: ta-blnet.0 (3250289) fetchJSONDataFromDevice: {"Header":{"Version":7,"Device":"91","Timestamp":1734681960},"Data":{"Inputs":[{"Number":1,"AD":"A","Value":{"Value":42.4,"Unit":"1"}},{"Number":2,"AD":"A","Value":{"Value":37.1,"Unit":"1"}},{"Number":3,"AD":"A","Value":{"Value":626,"Unit":"3"}},{"Number":4,"AD":"A","Value":{"Value":37.8,"Unit":"1"}},{"Number":5,"AD":"A","Value":{"Value":15.7,"Unit":"1"}},{"Number":6,"AD":"A","Value":{"Value":26,"Unit":"1"}}],"Outputs":[{"Number":1,"AD":"D","Value":{"Value":0,"Unit":"43"}},{"Number":2,"AD":"D","Value":{"Value":0,"Unit":"43"}}],"DL-Bus":[{"Number":1,"AD":"A","Value":{"Value":0,"Unit":"3"}},{"Number":2,"AD":"A","Value":{"Value":61.1,"Unit":"8"}},{"Number":3,"AD":"A","Value":{"Value":14.4,"Unit":"1"}},{"Number":4,"AD":"A","Value":{"Value":6.7,"Unit":"1"}}],"Logging Analog":[{"Number":1,"AD":"A","Value":{"Value":493,"Unit":"60"}},{"Number":2,"AD":"A","Value":{"Value":645,"Unit":"3"}},{"Number":16,"AD":"A","Value":{"Value":0,"Unit":"69"}},{"Number":17,"AD":"A","Value":{"Value":0,"Unit":"69"}}],"Logging Digital":[]},"Status":"OK","Status code":0} 2024-12-20 08:06:01.015 - debug: ta-blnet.0 (3250289) Sending request to 192.168.178.204 with options: {"auth":"admin:admin","hostname":"192.168.178.204","port":80,"path":"/INCLUDE/api.cgi?jsonnode=32&jsonparam=I,O,D,Na,Nd,La,Ld","method":"GET"} 2024-12-20 08:06:01.016 - debug: ta-blnet.0 (3250289) Sent request as attempt: 2 2024-12-20 08:06:01.016 - debug: ta-blnet.0 (3250289) Response object on attempt 2: {"data":{},"httpStatusCode":0,"httpStatusMessage":"","debug":""} 2024-12-20 08:06:01.023 - warn: ta-blnet.0 (3250289) TOO MANY REQUESTS: Only one request per minute is permitted (4 - TOO MANY REQUESTS) 2024-12-20 08:06:01.024 - debug: ta-blnet.0 (3250289) fetchJSONDataFromDevice: {"Header":{"Version":7,"Device":"91","Timestamp":1734681963},"Data":{},"Status":"TOO MANY REQUESTS","Status code":4} 2024-12-20 08:07:10.440 - debug: ta-blnet.0 (3250289) Sending request to 192.168.178.204 with options: {"auth":"admin:admin","hostname":"192.168.178.204","port":80,"path":"/INCLUDE/api.cgi?jsonnode=32&jsonparam=I,O,D,Na,Nd,La,Ld","method":"GET"} 2024-12-20 08:07:10.440 - debug: ta-blnet.0 (3250289) Sent request as attempt: 3 2024-12-20 08:07:10.440 - debug: ta-blnet.0 (3250289) Response object on attempt 3: {"data":{},"httpStatusCode":0,"httpStatusMessage":"","debug":""} 2024-12-20 08:07:12.688 - info: ta-blnet.0 (3250289) OK: 0 - OK 2024-12-20 08:07:12.688 - debug: ta-blnet.0 (3250289) fetchJSONDataFromDevice: {"Header":{"Version":7,"Device":"91","Timestamp":1734682032},"Data":{"Inputs":[{"Number":1,"AD":"A","Value":{"Value":42.4,"Unit":"1"}},{"Number":2,"AD":"A","Value":{"Value":37.2,"Unit":"1"}},{"Number":3,"AD":"A","Value":{"Value":629,"Unit":"3"}},{"Number":4,"AD":"A","Value":{"Value":37.5,"Unit":"1"}},{"Number":5,"AD":"A","Value":{"Value":15.8,"Unit":"1"}},{"Number":6,"AD":"A","Value":{"Value":26,"Unit":"1"}}],"Outputs":[{"Number":1,"AD":"D","Value":{"Value":0,"Unit":"43"}},{"Number":2,"AD":"D","Value":{"Value":0,"Unit":"43"}}],"DL-Bus":[{"Number":1,"AD":"A","Value":{"Value":0,"Unit":"3"}},{"Number":2,"AD":"A","Value":{"Value":61.1,"Unit":"8"}},{"Number":3,"AD":"A","Value":{"Value":14.4,"Unit":"1"}},{"Number":4,"AD":"A","Value":{"Value":6.7,"Unit":"1"}}],"Logging Analog":[{"Number":1,"AD":"A","Value":{"Value":494,"Unit":"60"}},{"Number":2,"AD":"A","Value":{"Value":624,"Unit":"3"}},{"Number":16,"AD":"A","Value":{"Value":0,"Unit":"69"}},{"Number":17,"AD":"A","Value":{"Value":0,"Unit":"69"}}],"Logging Digital":[]},"Status":"OK","Status code":0} 2024-12-20 08:07:13.017 - debug: ta-blnet.0 (3250289) Sending request to 192.168.178.204 with options: {"auth":"admin:admin","hostname":"192.168.178.204","port":80,"path":"/INCLUDE/api.cgi?jsonnode=32&jsonparam=I,O,D,Na,Nd,La,Ld","method":"GET"} 2024-12-20 08:07:13.017 - debug: ta-blnet.0 (3250289) Sent request as attempt: 3 2024-12-20 08:07:13.017 - debug: ta-blnet.0 (3250289) Response object on attempt 3: {"data":{},"httpStatusCode":0,"httpStatusMessage":"","debug":""} 2024-12-20 08:07:13.024 - warn: ta-blnet.0 (3250289) TOO MANY REQUESTS: Only one request per minute is permitted (4 - TOO MANY REQUESTS) 2024-12-20 08:07:13.024 - debug: ta-blnet.0 (3250289) fetchJSONDataFromDevice: {"Header":{"Version":7,"Device":"91","Timestamp":1734682035},"Data":{},"Status":"TOO MANY REQUESTS","Status code":4} 2024-12-20 08:08:28.034 - info: javascript.0 (3826864) script.js.common.4000_EnergieErzeugung.Energiezähler: +++ Einspeisung total aktualisiert +++ 2024-12-20 08:08:28.034 - info: javascript.0 (3826864) script.js.common.4000_EnergieErzeugung.Energiezähler: +++ Wärmepumpe aktualisiert +++ 2024-12-20 08:08:34.441 - debug: ta-blnet.0 (3250289) Sending request to 192.168.178.204 with options: {"auth":"admin:admin","hostname":"192.168.178.204","port":80,"path":"/INCLUDE/api.cgi?jsonnode=32&jsonparam=I,O,D,Na,Nd,La,Ld","method":"GET"} 2024-12-20 08:08:34.441 - debug: ta-blnet.0 (3250289) Sent request as attempt: 4 2024-12-20 08:08:34.441 - debug: ta-blnet.0 (3250289) Response object on attempt 4: {"data":{},"httpStatusCode":0,"httpStatusMessage":"","debug":""} 2024-12-20 08:08:36.690 - info: ta-blnet.0 (3250289) OK: 0 - OK 2024-12-20 08:08:36.690 - debug: ta-blnet.0 (3250289) fetchJSONDataFromDevice: {"Header":{"Version":7,"Device":"91","Timestamp":1734682116},"Data":{"Inputs":[{"Number":1,"AD":"A","Value":{"Value":42.5,"Unit":"1"}},{"Number":2,"AD":"A","Value":{"Value":37.3,"Unit":"1"}},{"Number":3,"AD":"A","Value":{"Value":640,"Unit":"3"}},{"Number":4,"AD":"A","Value":{"Value":37.4,"Unit":"1"}},{"Number":5,"AD":"A","Value":{"Value":16,"Unit":"1"}},{"Number":6,"AD":"A","Value":{"Value":26,"Unit":"1"}}],"Outputs":[{"Number":1,"AD":"D","Value":{"Value":0,"Unit":"43"}},{"Number":2,"AD":"D","Value":{"Value":0,"Unit":"43"}}],"DL-Bus":[{"Number":1,"AD":"A","Value":{"Value":0,"Unit":"3"}},{"Number":2,"AD":"A","Value":{"Value":61.1,"Unit":"8"}},{"Number":3,"AD":"A","Value":{"Value":14.4,"Unit":"1"}},{"Number":4,"AD":"A","Value":{"Value":6.7,"Unit":"1"}}],"Logging Analog":[{"Number":1,"AD":"A","Value":{"Value":495,"Unit":"60"}},{"Number":2,"AD":"A","Value":{"Value":628,"Unit":"3"}},{"Number":16,"AD":"A","Value":{"Value":0,"Unit":"69"}},{"Number":17,"AD":"A","Value":{"Value":0,"Unit":"69"}}],"Logging Digital":[]},"Status":"OK","Status code":0} 2024-12-20 08:08:37.018 - debug: ta-blnet.0 (3250289) Sending request to 192.168.178.204 with options: {"auth":"admin:admin","hostname":"192.168.178.204","port":80,"path":"/INCLUDE/api.cgi?jsonnode=32&jsonparam=I,O,D,Na,Nd,La,Ld","method":"GET"} 2024-12-20 08:08:37.018 - debug: ta-blnet.0 (3250289) Sent request as attempt: 4 2024-12-20 08:08:37.018 - debug: ta-blnet.0 (3250289) Response object on attempt 4: {"data":{},"httpStatusCode":0,"httpStatusMessage":"","debug":""} 2024-12-20 08:08:37.026 - warn: ta-blnet.0 (3250289) TOO MANY REQUESTS: Only one request per minute is permitted (4 - TOO MANY REQUESTS) 2024-12-20 08:08:37.026 - debug: ta-blnet.0 (3250289) fetchJSONDataFromDevice: {"Header":{"Version":7,"Device":"91","Timestamp":1734682119},"Data":{},"Status":"TOO MANY REQUESTS","Status code":4} 2024-12-20 08:10:10.441 - debug: ta-blnet.0 (3250289) Sending request to 192.168.178.204 with options: {"auth":"admin:admin","hostname":"192.168.178.204","port":80,"path":"/INCLUDE/api.cgi?jsonnode=32&jsonparam=I,O,D,Na,Nd,La,Ld","method":"GET"} 2024-12-20 08:10:10.442 - debug: ta-blnet.0 (3250289) Sent request as attempt: 5 2024-12-20 08:10:10.442 - debug: ta-blnet.0 (3250289) Response object on attempt 5: {"data":{},"httpStatusCode":0,"httpStatusMessage":"","debug":""} 2024-12-20 08:10:12.691 - info: ta-blnet.0 (3250289) OK: 0 - OK 2024-12-20 08:10:12.691 - debug: ta-blnet.0 (3250289) fetchJSONDataFromDevice: {"Header":{"Version":7,"Device":"91","Timestamp":1734682212},"Data":{"Inputs":[{"Number":1,"AD":"A","Value":{"Value":42.5,"Unit":"1"}},{"Number":2,"AD":"A","Value":{"Value":37.4,"Unit":"1"}},{"Number":3,"AD":"A","Value":{"Value":641,"Unit":"3"}},{"Number":4,"AD":"A","Value":{"Value":37.2,"Unit":"1"}},{"Number":5,"AD":"A","Value":{"Value":16.2,"Unit":"1"}},{"Number":6,"AD":"A","Value":{"Value":26,"Unit":"1"}}],"Outputs":[{"Number":1,"AD":"D","Value":{"Value":0,"Unit":"43"}},{"Number":2,"AD":"D","Value":{"Value":0,"Unit":"43"}}],"DL-Bus":[{"Number":1,"AD":"A","Value":{"Value":0,"Unit":"3"}},{"Number":2,"AD":"A","Value":{"Value":61.1,"Unit":"8"}},{"Number":3,"AD":"A","Value":{"Value":14.4,"Unit":"1"}},{"Number":4,"AD":"A","Value":{"Value":6.7,"Unit":"1"}}],"Logging Analog":[{"Number":1,"AD":"A","Value":{"Value":497,"Unit":"60"}},{"Number":2,"AD":"A","Value":{"Value":627,"Unit":"3"}},{"Number":16,"AD":"A","Value":{"Value":0,"Unit":"69"}},{"Number":17,"AD":"A","Value":{"Value":0,"Unit":"69"}}],"Logging Digital":[]},"Status":"OK","Status code":0} 2024-12-20 08:10:13.019 - debug: ta-blnet.0 (3250289) Sending request to 192.168.178.204 with options: {"auth":"admin:admin","hostname":"192.168.178.204","port":80,"path":"/INCLUDE/api.cgi?jsonnode=32&jsonparam=I,O,D,Na,Nd,La,Ld","method":"GET"} 2024-12-20 08:10:13.020 - debug: ta-blnet.0 (3250289) Sent request as attempt: 5 2024-12-20 08:10:13.020 - debug: ta-blnet.0 (3250289) Response object on attempt 5: {"data":{},"httpStatusCode":0,"httpStatusMessage":"","debug":""} 2024-12-20 08:10:13.020 - error: ta-blnet.0 (3250289) Error during communication with device: Error: Max retries reached. Unable to communicate with device. 2024-12-20 08:10:13.027 - warn: ta-blnet.0 (3250289) TOO MANY REQUESTS: Only one request per minute is permitted (4 - TOO MANY REQUESTS) 2024-12-20 08:10:13.028 - debug: ta-blnet.0 (3250289) fetchJSONDataFromDevice: {"Header":{"Version":7,"Device":"91","Timestamp":1734682215},"Data":{},"Status":"TOO MANY REQUESTS","Status code":4} 2024-12-20 08:10:13.060 - error: ta-blnet.0 (3250289) Error polling state values: Error: Max retries reached. Unable to communicate with device. 2024-12-20 08:10:54.578 - info: host.lxcIoBSlave "system.adapter.ta-blnet.0" disabled 2024-12-20 08:10:54.579 - info: host.lxcIoBSlave stopInstance system.adapter.ta-blnet.0 (force=false, process=true) 2024-12-20 08:10:54.598 - info: ta-blnet.0 (3250289) Got terminate signal TERMINATE_YOURSELF 2024-12-20 08:10:54.598 - debug: ta-blnet.0 (3250289) onUnload: Cleared orphan timeout. 2024-12-20 08:10:54.599 - info: ta-blnet.0 (3250289) terminating 2024-12-20 08:10:54.599 - info: ta-blnet.0 (3250289) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2024-12-20 08:10:54.753 - info: host.lxcIoBSlave stopInstance system.adapter.ta-blnet.0 send kill signal 2024-12-20 08:10:55.099 - info: ta-blnet.0 (3250289) terminating 2024-12-20 08:10:55.221 - info: host.lxcIoBSlave instance system.adapter.ta-blnet.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) -
-
@ullij ja, die Aktualisierung hat sich aufgrund von zu viel asynchronen Aufrufen selber überholt und endlich eingehende Ergebnisse dann ignoriert. v1.0.33 hab ich diesbezüglich verbessert. Hoffe nun werden die Daten auch aktualisiert. Bitte erneut 5 Minuten mitloggen.
-
bitte schön...
Habe 2 min länger laufen lassen. In den ersten 5min bleibt die Instanz auf gelb, ab 09:57:40 dann grün.
Aktualisierung der DP in den ersten 5min: keine, ab 9:57 okMache das später nochmal und lass es einfach mal laufen
2024-12-21 09:50:13.051 - info: host.lxcIoBSlave "system.adapter.ta-blnet.0" enabled 2024-12-21 09:50:13.627 - info: host.lxcIoBSlave instance system.adapter.ta-blnet.0 in version "1.0.33" (non-npm: weberk/ioBroker.ta-blnet#74f5f32c5d515757fb2079546f2ccdc85b54a96b) started with pid 1198552 2024-12-21 09:50:13.914 - debug: ta-blnet.0 (1198552) Redis Objects: Use Redis connection: 192.168.178.9:9001 2024-12-21 09:50:13.929 - debug: ta-blnet.0 (1198552) Objects client ready ... initialize now 2024-12-21 09:50:13.929 - debug: ta-blnet.0 (1198552) Objects create System PubSub Client 2024-12-21 09:50:13.930 - debug: ta-blnet.0 (1198552) Objects create User PubSub Client 2024-12-21 09:50:13.956 - debug: ta-blnet.0 (1198552) Objects client initialize lua scripts 2024-12-21 09:50:13.958 - debug: ta-blnet.0 (1198552) Objects connected to redis: 192.168.178.9:9001 2024-12-21 09:50:13.977 - debug: ta-blnet.0 (1198552) Redis States: Use Redis connection: 192.168.178.9:9000 2024-12-21 09:50:13.990 - debug: ta-blnet.0 (1198552) States create System PubSub Client 2024-12-21 09:50:13.991 - debug: ta-blnet.0 (1198552) States create User PubSub Client 2024-12-21 09:50:14.072 - debug: ta-blnet.0 (1198552) States connected to redis: 192.168.178.9:9000 2024-12-21 09:50:14.197 - info: ta-blnet.0 (1198552) starting. Version 1.0.33 (non-npm: weberk/ioBroker.ta-blnet#74f5f32c5d515757fb2079546f2ccdc85b54a96b) in /opt/iobroker/node_modules/iobroker.ta-blnet, node: v20.18.1, js-controller: 7.0.3 2024-12-21 09:50:14.202 - info: ta-blnet.0 (1198552) config ip_address: 192.168.178.204 2024-12-21 09:50:14.202 - info: ta-blnet.0 (1198552) config port: 80 2024-12-21 09:50:14.202 - info: ta-blnet.0 (1198552) config poll_interval: 62 2024-12-21 09:50:14.202 - info: ta-blnet.0 (1198552) expert_username: admin 2024-12-21 09:50:14.202 - info: ta-blnet.0 (1198552) expert_password: admin 2024-12-21 09:50:14.202 - info: ta-blnet.0 (1198552) selected_ta_logger: CMI 2024-12-21 09:50:14.202 - info: ta-blnet.0 (1198552) JavaScript Configuration Object: {"requests":[{"can_node_number":32,"data_objects":"I,O,D,Na,Nd,La,Ld"}]} 2024-12-21 09:50:14.226 - debug: ta-blnet.0 (1198552) onReady: Initialization time logger is the same as in configuration. 2024-12-21 09:51:16.227 - info: ta-blnet.0 (1198552) CAN Node Numbers Array: [32] 2024-12-21 09:51:16.228 - debug: ta-blnet.0 (1198552) readSystemConfiguration reading data for CAN node: 32 2024-12-21 09:51:16.228 - debug: ta-blnet.0 (1198552) fetchJSONDataFromDevice for CAN node: 32 with data_objects: "I,O,D,Na,Nd,La,Ld" 2024-12-21 09:51:16.228 - debug: ta-blnet.0 (1198552) Initiate attempt to fetch JSON data from CMI 2024-12-21 09:51:16.228 - debug: ta-blnet.0 (1198552) Sending request to 192.168.178.204 with options: {"auth":"admin:admin","hostname":"192.168.178.204","port":80,"path":"/INCLUDE/api.cgi?jsonnode=32&jsonparam=I,O,D,Na,Nd,La,Ld","method":"GET"} 2024-12-21 09:51:16.230 - debug: ta-blnet.0 (1198552) Sending request as attempt: 1 2024-12-21 09:51:18.232 - debug: ta-blnet.0 (1198552) Response object on attempt 1: {"data":{"Header":{"Version":7,"Device":"91","Timestamp":1734774677},"Data":{"Inputs":[{"Number":1,"AD":"A","Value":{"Value":40,"Unit":"1"}},{"Number":2,"AD":"A","Value":{"Value":36.6,"Unit":"1"}},{"Number":3,"AD":"A","Value":{"Value":682,"Unit":"3"}},{"Number":4,"AD":"A","Value":{"Value":36.1,"Unit":"1"}},{"Number":5,"AD":"A","Value":{"Value":21.6,"Unit":"1"}},{"Number":6,"AD":"A","Value":{"Value":27.9,"Unit":"1"}}],"Outputs":[{"Number":1,"AD":"D","Value":{"Value":0,"Unit":"43"}},{"Number":2,"AD":"D","Value":{"Value":0,"Unit":"43"}}],"DL-Bus":[{"Number":1,"AD":"A","Value":{"Value":0,"Unit":"3"}},{"Number":2,"AD":"A","Value":{"Value":63.1,"Unit":"8"}},{"Number":3,"AD":"A","Value":{"Value":13.4,"Unit":"1"}},{"Number":4,"AD":"A","Value":{"Value":6.2,"Unit":"1"}}],"Logging Analog":[{"Number":1,"AD":"A","Value":{"Value":598,"Unit":"60"}},{"Number":2,"AD":"A","Value":{"Value":697,"Unit":"3"}},{"Number":16,"AD":"A","Value":{"Value":0,"Unit":"69"}},{"Number":17,"AD":"A","Value":{"Value":0,"Unit":"69"}}],"Logging Digital":[]},"Status":"OK","Status code":0},"httpStatusCode":200,"httpStatusMessage":"OK","debug":"Call to 192.168.178.204 returning 200: OK CMI Code: 0"} 2024-12-21 09:51:18.232 - debug: ta-blnet.0 (1198552) deviceInfo is defined as:{"uvr_mode":"1CAN","uvr_type_str":["UVR610"],"uvr_type_code":["91"],"channelNodes":[32],"module_id":"--","firmware_version":"--","transmission_mode":"--"} 2024-12-21 09:51:18.232 - info: ta-blnet.0 (1198552) readSystemConfiguration succeeded. 2024-12-21 09:51:18.232 - debug: ta-blnet.0 (1198552) Setting connection status to: true 2024-12-21 09:51:18.273 - debug: ta-blnet.0 (1198552) logging_analog status: {"A01":{"value":598,"unit":"h"},"A02":{"value":697,"unit":"l/h"},"A16":{"value":0,"unit":"W"},"A17":{"value":0,"unit":"W"}} 2024-12-21 09:51:18.328 - debug: ta-blnet.0 (1198552) logging_digital status: {} 2024-12-21 09:51:18.329 - debug: ta-blnet.0 (1198552) inputs status: {"A01":{"value":40,"unit":"°C"},"A02":{"value":36.6,"unit":"°C"},"A03":{"value":682,"unit":"l/h"},"A04":{"value":36.1,"unit":"°C"},"A05":{"value":21.6,"unit":"°C"},"A06":{"value":27.9,"unit":"°C"}} 2024-12-21 09:51:18.390 - debug: ta-blnet.0 (1198552) outputs status: {"D01":{"value":0,"unit":"ON/OFF"},"D02":{"value":0,"unit":"ON/OFF"}} 2024-12-21 09:51:18.440 - debug: ta-blnet.0 (1198552) network_analog section: undefined 2024-12-21 09:51:18.440 - debug: ta-blnet.0 (1198552) network_digital section: undefined 2024-12-21 09:51:18.441 - debug: ta-blnet.0 (1198552) dl-bus status: {"A01":{"value":0,"unit":"l/h"},"A02":{"value":63.1,"unit":"%"},"A03":{"value":13.4,"unit":"°C"},"A04":{"value":6.2,"unit":"°C"}} 2024-12-21 09:51:18.495 - debug: ta-blnet.0 (1198552) general section: undefined 2024-12-21 09:51:18.495 - debug: ta-blnet.0 (1198552) date section: undefined 2024-12-21 09:51:18.495 - debug: ta-blnet.0 (1198552) time section: undefined 2024-12-21 09:51:18.495 - debug: ta-blnet.0 (1198552) sun section: undefined 2024-12-21 09:51:18.495 - debug: ta-blnet.0 (1198552) electrical_power section: undefined 2024-12-21 09:51:18.495 - debug: ta-blnet.0 (1198552) electrical_power section: undefined 2024-12-21 09:51:18.495 - debug: ta-blnet.0 (1198552) mbus section: undefined 2024-12-21 09:51:18.495 - debug: ta-blnet.0 (1198552) m-bus section: undefined 2024-12-21 09:51:18.495 - debug: ta-blnet.0 (1198552) modbus section: undefined 2024-12-21 09:51:18.495 - debug: ta-blnet.0 (1198552) knx section: undefined 2024-12-21 09:51:18.495 - debug: ta-blnet.0 (1198552) objects for metrics declared. 2024-12-21 09:51:18.495 - debug: ta-blnet.0 (1198552) Initialization succeeded. 2024-12-21 09:51:18.495 - debug: ta-blnet.0 (1198552) Polling state values from devices: [32] 2024-12-21 09:51:18.495 - debug: ta-blnet.0 (1198552) fetchStateValuesFromDevice CMI for CAN node id: 32 2024-12-21 09:51:18.495 - debug: ta-blnet.0 (1198552) fetchJSONDataFromDevice for CAN node: 32 with data_objects: "I,O,D,Na,Nd,La,Ld" 2024-12-21 09:51:18.495 - debug: ta-blnet.0 (1198552) Initiate attempt to fetch JSON data from CMI 2024-12-21 09:51:18.495 - debug: ta-blnet.0 (1198552) Sending request to 192.168.178.204 with options: {"auth":"admin:admin","hostname":"192.168.178.204","port":80,"path":"/INCLUDE/api.cgi?jsonnode=32&jsonparam=I,O,D,Na,Nd,La,Ld","method":"GET"} 2024-12-21 09:51:18.496 - debug: ta-blnet.0 (1198552) Sending request as attempt: 1 2024-12-21 09:51:18.503 - warn: ta-blnet.0 (1198552) TOO MANY REQUESTS: Only one request per minute is permitted (4 - TOO MANY REQUESTS) 2024-12-21 09:51:18.503 - error: ta-blnet.0 (1198552) Error during communication with device on attempt 1: Error: Non-zero status code 2024-12-21 09:52:18.233 - debug: ta-blnet.0 (1198552) Response object on attempt 1: {"data":{"Header":{"Version":7,"Device":"91","Timestamp":1734774677},"Data":{"Inputs":[{"Number":1,"AD":"A","Value":{"Value":40,"Unit":"1"}},{"Number":2,"AD":"A","Value":{"Value":36.6,"Unit":"1"}},{"Number":3,"AD":"A","Value":{"Value":682,"Unit":"3"}},{"Number":4,"AD":"A","Value":{"Value":36.1,"Unit":"1"}},{"Number":5,"AD":"A","Value":{"Value":21.6,"Unit":"1"}},{"Number":6,"AD":"A","Value":{"Value":27.9,"Unit":"1"}}],"Outputs":[{"Number":1,"AD":"D","Value":{"Value":0,"Unit":"43"}},{"Number":2,"AD":"D","Value":{"Value":0,"Unit":"43"}}],"DL-Bus":[{"Number":1,"AD":"A","Value":{"Value":0,"Unit":"3"}},{"Number":2,"AD":"A","Value":{"Value":63.1,"Unit":"8"}},{"Number":3,"AD":"A","Value":{"Value":13.4,"Unit":"1"}},{"Number":4,"AD":"A","Value":{"Value":6.2,"Unit":"1"}}],"Logging Analog":[{"Number":1,"AD":"A","Value":{"Value":598,"Unit":"60"}},{"Number":2,"AD":"A","Value":{"Value":697,"Unit":"3"}},{"Number":16,"AD":"A","Value":{"Value":0,"Unit":"69"}},{"Number":17,"AD":"A","Value":{"Value":0,"Unit":"69"}}],"Logging Digital":[]},"Status":"OK","Status code":0},"httpStatusCode":200,"httpStatusMessage":"OK","debug":"Call to 192.168.178.204 returning 200: OK CMI Code: 0"} 2024-12-21 09:52:18.233 - debug: ta-blnet.0 (1198552) Sending request to 192.168.178.204 with options: {"auth":"admin:admin","hostname":"192.168.178.204","port":80,"path":"/INCLUDE/api.cgi?jsonnode=32&jsonparam=I,O,D,Na,Nd,La,Ld","method":"GET"} 2024-12-21 09:52:18.234 - debug: ta-blnet.0 (1198552) Sending request as attempt: 2 2024-12-21 09:52:18.504 - debug: ta-blnet.0 (1198552) Response object on attempt 1: {"data":{"Header":{"Version":7,"Device":"91","Timestamp":1734774680},"Data":{},"Status":"TOO MANY REQUESTS","Status code":4},"httpStatusCode":200,"httpStatusMessage":"OK","debug":"Call to 192.168.178.204 returning 200: OK CMI Code: 4"} 2024-12-21 09:52:18.504 - debug: ta-blnet.0 (1198552) Sending request to 192.168.178.204 with options: {"auth":"admin:admin","hostname":"192.168.178.204","port":80,"path":"/INCLUDE/api.cgi?jsonnode=32&jsonparam=I,O,D,Na,Nd,La,Ld","method":"GET"} 2024-12-21 09:52:18.505 - debug: ta-blnet.0 (1198552) Sending request as attempt: 2 2024-12-21 09:52:20.489 - debug: ta-blnet.0 (1198552) Response object on attempt 2: {"data":{"Header":{"Version":7,"Device":"91","Timestamp":1734774739},"Data":{"Inputs":[{"Number":1,"AD":"A","Value":{"Value":40,"Unit":"1"}},{"Number":2,"AD":"A","Value":{"Value":36.5,"Unit":"1"}},{"Number":3,"AD":"A","Value":{"Value":681,"Unit":"3"}},{"Number":4,"AD":"A","Value":{"Value":36,"Unit":"1"}},{"Number":5,"AD":"A","Value":{"Value":21.6,"Unit":"1"}},{"Number":6,"AD":"A","Value":{"Value":27.8,"Unit":"1"}}],"Outputs":[{"Number":1,"AD":"D","Value":{"Value":0,"Unit":"43"}},{"Number":2,"AD":"D","Value":{"Value":0,"Unit":"43"}}],"DL-Bus":[{"Number":1,"AD":"A","Value":{"Value":0,"Unit":"3"}},{"Number":2,"AD":"A","Value":{"Value":63.1,"Unit":"8"}},{"Number":3,"AD":"A","Value":{"Value":13.4,"Unit":"1"}},{"Number":4,"AD":"A","Value":{"Value":6.2,"Unit":"1"}}],"Logging Analog":[{"Number":1,"AD":"A","Value":{"Value":599,"Unit":"60"}},{"Number":2,"AD":"A","Value":{"Value":696,"Unit":"3"}},{"Number":16,"AD":"A","Value":{"Value":0,"Unit":"69"}},{"Number":17,"AD":"A","Value":{"Value":0,"Unit":"69"}}],"Logging Digital":[]},"Status":"OK","Status code":0},"httpStatusCode":200,"httpStatusMessage":"OK","debug":"Call to 192.168.178.204 returning 200: OK CMI Code: 0"} 2024-12-21 09:52:20.495 - warn: ta-blnet.0 (1198552) TOO MANY REQUESTS: Only one request per minute is permitted (4 - TOO MANY REQUESTS) 2024-12-21 09:52:20.495 - error: ta-blnet.0 (1198552) Error during communication with device on attempt 2: Error: Non-zero status code 2024-12-21 09:53:32.489 - debug: ta-blnet.0 (1198552) Response object on attempt 2: {"data":{"Header":{"Version":7,"Device":"91","Timestamp":1734774739},"Data":{"Inputs":[{"Number":1,"AD":"A","Value":{"Value":40,"Unit":"1"}},{"Number":2,"AD":"A","Value":{"Value":36.5,"Unit":"1"}},{"Number":3,"AD":"A","Value":{"Value":681,"Unit":"3"}},{"Number":4,"AD":"A","Value":{"Value":36,"Unit":"1"}},{"Number":5,"AD":"A","Value":{"Value":21.6,"Unit":"1"}},{"Number":6,"AD":"A","Value":{"Value":27.8,"Unit":"1"}}],"Outputs":[{"Number":1,"AD":"D","Value":{"Value":0,"Unit":"43"}},{"Number":2,"AD":"D","Value":{"Value":0,"Unit":"43"}}],"DL-Bus":[{"Number":1,"AD":"A","Value":{"Value":0,"Unit":"3"}},{"Number":2,"AD":"A","Value":{"Value":63.1,"Unit":"8"}},{"Number":3,"AD":"A","Value":{"Value":13.4,"Unit":"1"}},{"Number":4,"AD":"A","Value":{"Value":6.2,"Unit":"1"}}],"Logging Analog":[{"Number":1,"AD":"A","Value":{"Value":599,"Unit":"60"}},{"Number":2,"AD":"A","Value":{"Value":696,"Unit":"3"}},{"Number":16,"AD":"A","Value":{"Value":0,"Unit":"69"}},{"Number":17,"AD":"A","Value":{"Value":0,"Unit":"69"}}],"Logging Digital":[]},"Status":"OK","Status code":0},"httpStatusCode":200,"httpStatusMessage":"OK","debug":"Call to 192.168.178.204 returning 200: OK CMI Code: 0"} 2024-12-21 09:53:32.489 - debug: ta-blnet.0 (1198552) Sending request to 192.168.178.204 with options: {"auth":"admin:admin","hostname":"192.168.178.204","port":80,"path":"/INCLUDE/api.cgi?jsonnode=32&jsonparam=I,O,D,Na,Nd,La,Ld","method":"GET"} 2024-12-21 09:53:32.490 - debug: ta-blnet.0 (1198552) Sending request as attempt: 3 2024-12-21 09:53:32.496 - debug: ta-blnet.0 (1198552) Response object on attempt 2: {"data":{"Header":{"Version":7,"Device":"91","Timestamp":1734774742},"Data":{},"Status":"TOO MANY REQUESTS","Status code":4},"httpStatusCode":200,"httpStatusMessage":"OK","debug":"Call to 192.168.178.204 returning 200: OK CMI Code: 4"} 2024-12-21 09:53:32.496 - debug: ta-blnet.0 (1198552) Sending request to 192.168.178.204 with options: {"auth":"admin:admin","hostname":"192.168.178.204","port":80,"path":"/INCLUDE/api.cgi?jsonnode=32&jsonparam=I,O,D,Na,Nd,La,Ld","method":"GET"} 2024-12-21 09:53:32.496 - debug: ta-blnet.0 (1198552) Sending request as attempt: 3 2024-12-21 09:53:34.741 - debug: ta-blnet.0 (1198552) Response object on attempt 3: {"data":{"Header":{"Version":7,"Device":"91","Timestamp":1734774814},"Data":{"Inputs":[{"Number":1,"AD":"A","Value":{"Value":40,"Unit":"1"}},{"Number":2,"AD":"A","Value":{"Value":36.5,"Unit":"1"}},{"Number":3,"AD":"A","Value":{"Value":712,"Unit":"3"}},{"Number":4,"AD":"A","Value":{"Value":35.9,"Unit":"1"}},{"Number":5,"AD":"A","Value":{"Value":21.6,"Unit":"1"}},{"Number":6,"AD":"A","Value":{"Value":27.8,"Unit":"1"}}],"Outputs":[{"Number":1,"AD":"D","Value":{"Value":0,"Unit":"43"}},{"Number":2,"AD":"D","Value":{"Value":0,"Unit":"43"}}],"DL-Bus":[{"Number":1,"AD":"A","Value":{"Value":0,"Unit":"3"}},{"Number":2,"AD":"A","Value":{"Value":63.1,"Unit":"8"}},{"Number":3,"AD":"A","Value":{"Value":13.4,"Unit":"1"}},{"Number":4,"AD":"A","Value":{"Value":6.2,"Unit":"1"}}],"Logging Analog":[{"Number":1,"AD":"A","Value":{"Value":600,"Unit":"60"}},{"Number":2,"AD":"A","Value":{"Value":709,"Unit":"3"}},{"Number":16,"AD":"A","Value":{"Value":0,"Unit":"69"}},{"Number":17,"AD":"A","Value":{"Value":0,"Unit":"69"}}],"Logging Digital":[]},"Status":"OK","Status code":0},"httpStatusCode":200,"httpStatusMessage":"OK","debug":"Call to 192.168.178.204 returning 200: OK CMI Code: 0"} 2024-12-21 09:53:34.747 - warn: ta-blnet.0 (1198552) TOO MANY REQUESTS: Only one request per minute is permitted (4 - TOO MANY REQUESTS) 2024-12-21 09:53:34.747 - error: ta-blnet.0 (1198552) Error during communication with device on attempt 3: Error: Non-zero status code 2024-12-21 09:54:58.741 - debug: ta-blnet.0 (1198552) Response object on attempt 3: {"data":{"Header":{"Version":7,"Device":"91","Timestamp":1734774814},"Data":{"Inputs":[{"Number":1,"AD":"A","Value":{"Value":40,"Unit":"1"}},{"Number":2,"AD":"A","Value":{"Value":36.5,"Unit":"1"}},{"Number":3,"AD":"A","Value":{"Value":712,"Unit":"3"}},{"Number":4,"AD":"A","Value":{"Value":35.9,"Unit":"1"}},{"Number":5,"AD":"A","Value":{"Value":21.6,"Unit":"1"}},{"Number":6,"AD":"A","Value":{"Value":27.8,"Unit":"1"}}],"Outputs":[{"Number":1,"AD":"D","Value":{"Value":0,"Unit":"43"}},{"Number":2,"AD":"D","Value":{"Value":0,"Unit":"43"}}],"DL-Bus":[{"Number":1,"AD":"A","Value":{"Value":0,"Unit":"3"}},{"Number":2,"AD":"A","Value":{"Value":63.1,"Unit":"8"}},{"Number":3,"AD":"A","Value":{"Value":13.4,"Unit":"1"}},{"Number":4,"AD":"A","Value":{"Value":6.2,"Unit":"1"}}],"Logging Analog":[{"Number":1,"AD":"A","Value":{"Value":600,"Unit":"60"}},{"Number":2,"AD":"A","Value":{"Value":709,"Unit":"3"}},{"Number":16,"AD":"A","Value":{"Value":0,"Unit":"69"}},{"Number":17,"AD":"A","Value":{"Value":0,"Unit":"69"}}],"Logging Digital":[]},"Status":"OK","Status code":0},"httpStatusCode":200,"httpStatusMessage":"OK","debug":"Call to 192.168.178.204 returning 200: OK CMI Code: 0"} 2024-12-21 09:54:58.741 - debug: ta-blnet.0 (1198552) Sending request to 192.168.178.204 with options: {"auth":"admin:admin","hostname":"192.168.178.204","port":80,"path":"/INCLUDE/api.cgi?jsonnode=32&jsonparam=I,O,D,Na,Nd,La,Ld","method":"GET"} 2024-12-21 09:54:58.742 - debug: ta-blnet.0 (1198552) Sending request as attempt: 4 2024-12-21 09:54:58.748 - debug: ta-blnet.0 (1198552) Response object on attempt 3: {"data":{"Header":{"Version":7,"Device":"91","Timestamp":1734774816},"Data":{},"Status":"TOO MANY REQUESTS","Status code":4},"httpStatusCode":200,"httpStatusMessage":"OK","debug":"Call to 192.168.178.204 returning 200: OK CMI Code: 4"} 2024-12-21 09:54:58.748 - debug: ta-blnet.0 (1198552) Sending request to 192.168.178.204 with options: {"auth":"admin:admin","hostname":"192.168.178.204","port":80,"path":"/INCLUDE/api.cgi?jsonnode=32&jsonparam=I,O,D,Na,Nd,La,Ld","method":"GET"} 2024-12-21 09:54:58.749 - debug: ta-blnet.0 (1198552) Sending request as attempt: 4 2024-12-21 09:55:00.744 - debug: ta-blnet.0 (1198552) Response object on attempt 4: {"data":{"Header":{"Version":7,"Device":"91","Timestamp":1734774900},"Data":{"Inputs":[{"Number":1,"AD":"A","Value":{"Value":40.1,"Unit":"1"}},{"Number":2,"AD":"A","Value":{"Value":36.6,"Unit":"1"}},{"Number":3,"AD":"A","Value":{"Value":707,"Unit":"3"}},{"Number":4,"AD":"A","Value":{"Value":35.8,"Unit":"1"}},{"Number":5,"AD":"A","Value":{"Value":21.7,"Unit":"1"}},{"Number":6,"AD":"A","Value":{"Value":27.7,"Unit":"1"}}],"Outputs":[{"Number":1,"AD":"D","Value":{"Value":0,"Unit":"43"}},{"Number":2,"AD":"D","Value":{"Value":0,"Unit":"43"}}],"DL-Bus":[{"Number":1,"AD":"A","Value":{"Value":0,"Unit":"3"}},{"Number":2,"AD":"A","Value":{"Value":63.1,"Unit":"8"}},{"Number":3,"AD":"A","Value":{"Value":13.4,"Unit":"1"}},{"Number":4,"AD":"A","Value":{"Value":6.2,"Unit":"1"}}],"Logging Analog":[{"Number":1,"AD":"A","Value":{"Value":602,"Unit":"60"}},{"Number":2,"AD":"A","Value":{"Value":714,"Unit":"3"}},{"Number":16,"AD":"A","Value":{"Value":0,"Unit":"69"}},{"Number":17,"AD":"A","Value":{"Value":0,"Unit":"69"}}],"Logging Digital":[]},"Status":"OK","Status code":0},"httpStatusCode":200,"httpStatusMessage":"OK","debug":"Call to 192.168.178.204 returning 200: OK CMI Code: 0"} 2024-12-21 09:55:00.750 - warn: ta-blnet.0 (1198552) TOO MANY REQUESTS: Only one request per minute is permitted (4 - TOO MANY REQUESTS) 2024-12-21 09:55:00.750 - error: ta-blnet.0 (1198552) Error during communication with device on attempt 4: Error: Non-zero status code 2024-12-21 09:56:36.745 - debug: ta-blnet.0 (1198552) Response object on attempt 4: {"data":{"Header":{"Version":7,"Device":"91","Timestamp":1734774900},"Data":{"Inputs":[{"Number":1,"AD":"A","Value":{"Value":40.1,"Unit":"1"}},{"Number":2,"AD":"A","Value":{"Value":36.6,"Unit":"1"}},{"Number":3,"AD":"A","Value":{"Value":707,"Unit":"3"}},{"Number":4,"AD":"A","Value":{"Value":35.8,"Unit":"1"}},{"Number":5,"AD":"A","Value":{"Value":21.7,"Unit":"1"}},{"Number":6,"AD":"A","Value":{"Value":27.7,"Unit":"1"}}],"Outputs":[{"Number":1,"AD":"D","Value":{"Value":0,"Unit":"43"}},{"Number":2,"AD":"D","Value":{"Value":0,"Unit":"43"}}],"DL-Bus":[{"Number":1,"AD":"A","Value":{"Value":0,"Unit":"3"}},{"Number":2,"AD":"A","Value":{"Value":63.1,"Unit":"8"}},{"Number":3,"AD":"A","Value":{"Value":13.4,"Unit":"1"}},{"Number":4,"AD":"A","Value":{"Value":6.2,"Unit":"1"}}],"Logging Analog":[{"Number":1,"AD":"A","Value":{"Value":602,"Unit":"60"}},{"Number":2,"AD":"A","Value":{"Value":714,"Unit":"3"}},{"Number":16,"AD":"A","Value":{"Value":0,"Unit":"69"}},{"Number":17,"AD":"A","Value":{"Value":0,"Unit":"69"}}],"Logging Digital":[]},"Status":"OK","Status code":0},"httpStatusCode":200,"httpStatusMessage":"OK","debug":"Call to 192.168.178.204 returning 200: OK CMI Code: 0"} 2024-12-21 09:56:36.745 - debug: ta-blnet.0 (1198552) Sending request to 192.168.178.204 with options: {"auth":"admin:admin","hostname":"192.168.178.204","port":80,"path":"/INCLUDE/api.cgi?jsonnode=32&jsonparam=I,O,D,Na,Nd,La,Ld","method":"GET"} 2024-12-21 09:56:36.746 - debug: ta-blnet.0 (1198552) Sending request as attempt: 5 2024-12-21 09:56:36.750 - debug: ta-blnet.0 (1198552) Response object on attempt 4: {"data":{"Header":{"Version":7,"Device":"91","Timestamp":1734774902},"Data":{},"Status":"TOO MANY REQUESTS","Status code":4},"httpStatusCode":200,"httpStatusMessage":"OK","debug":"Call to 192.168.178.204 returning 200: OK CMI Code: 4"} 2024-12-21 09:56:36.750 - debug: ta-blnet.0 (1198552) Sending request to 192.168.178.204 with options: {"auth":"admin:admin","hostname":"192.168.178.204","port":80,"path":"/INCLUDE/api.cgi?jsonnode=32&jsonparam=I,O,D,Na,Nd,La,Ld","method":"GET"} 2024-12-21 09:56:36.751 - debug: ta-blnet.0 (1198552) Sending request as attempt: 5 2024-12-21 09:56:38.747 - debug: ta-blnet.0 (1198552) Response object on attempt 5: {"data":{"Header":{"Version":7,"Device":"91","Timestamp":1734774998},"Data":{"Inputs":[{"Number":1,"AD":"A","Value":{"Value":40.2,"Unit":"1"}},{"Number":2,"AD":"A","Value":{"Value":36.2,"Unit":"1"}},{"Number":3,"AD":"A","Value":{"Value":713,"Unit":"3"}},{"Number":4,"AD":"A","Value":{"Value":35.8,"Unit":"1"}},{"Number":5,"AD":"A","Value":{"Value":21.7,"Unit":"1"}},{"Number":6,"AD":"A","Value":{"Value":27.7,"Unit":"1"}}],"Outputs":[{"Number":1,"AD":"D","Value":{"Value":0,"Unit":"43"}},{"Number":2,"AD":"D","Value":{"Value":0,"Unit":"43"}}],"DL-Bus":[{"Number":1,"AD":"A","Value":{"Value":0,"Unit":"3"}},{"Number":2,"AD":"A","Value":{"Value":63.1,"Unit":"8"}},{"Number":3,"AD":"A","Value":{"Value":13.4,"Unit":"1"}},{"Number":4,"AD":"A","Value":{"Value":6.2,"Unit":"1"}}],"Logging Analog":[{"Number":1,"AD":"A","Value":{"Value":604,"Unit":"60"}},{"Number":2,"AD":"A","Value":{"Value":714,"Unit":"3"}},{"Number":16,"AD":"A","Value":{"Value":0,"Unit":"69"}},{"Number":17,"AD":"A","Value":{"Value":0,"Unit":"69"}}],"Logging Digital":[]},"Status":"OK","Status code":0},"httpStatusCode":200,"httpStatusMessage":"OK","debug":"Call to 192.168.178.204 returning 200: OK CMI Code: 0"} 2024-12-21 09:56:38.747 - debug: ta-blnet.0 (1198552) Response object on attempt 5: {"data":{"Header":{"Version":7,"Device":"91","Timestamp":1734774998},"Data":{"Inputs":[{"Number":1,"AD":"A","Value":{"Value":40.2,"Unit":"1"}},{"Number":2,"AD":"A","Value":{"Value":36.2,"Unit":"1"}},{"Number":3,"AD":"A","Value":{"Value":713,"Unit":"3"}},{"Number":4,"AD":"A","Value":{"Value":35.8,"Unit":"1"}},{"Number":5,"AD":"A","Value":{"Value":21.7,"Unit":"1"}},{"Number":6,"AD":"A","Value":{"Value":27.7,"Unit":"1"}}],"Outputs":[{"Number":1,"AD":"D","Value":{"Value":0,"Unit":"43"}},{"Number":2,"AD":"D","Value":{"Value":0,"Unit":"43"}}],"DL-Bus":[{"Number":1,"AD":"A","Value":{"Value":0,"Unit":"3"}},{"Number":2,"AD":"A","Value":{"Value":63.1,"Unit":"8"}},{"Number":3,"AD":"A","Value":{"Value":13.4,"Unit":"1"}},{"Number":4,"AD":"A","Value":{"Value":6.2,"Unit":"1"}}],"Logging Analog":[{"Number":1,"AD":"A","Value":{"Value":604,"Unit":"60"}},{"Number":2,"AD":"A","Value":{"Value":714,"Unit":"3"}},{"Number":16,"AD":"A","Value":{"Value":0,"Unit":"69"}},{"Number":17,"AD":"A","Value":{"Value":0,"Unit":"69"}}],"Logging Digital":[]},"Status":"OK","Status code":0},"httpStatusCode":200,"httpStatusMessage":"OK","debug":"Call to 192.168.178.204 returning 200: OK CMI Code: 0"} 2024-12-21 09:56:38.753 - warn: ta-blnet.0 (1198552) TOO MANY REQUESTS: Only one request per minute is permitted (4 - TOO MANY REQUESTS) 2024-12-21 09:56:38.753 - error: ta-blnet.0 (1198552) Error during communication with device on attempt 5: Error: Non-zero status code 2024-12-21 09:56:38.753 - debug: ta-blnet.0 (1198552) Response object on attempt 5: {"data":{"Header":{"Version":7,"Device":"91","Timestamp":1734775000},"Data":{},"Status":"TOO MANY REQUESTS","Status code":4},"httpStatusCode":200,"httpStatusMessage":"OK","debug":"Call to 192.168.178.204 returning 200: OK CMI Code: 4"} 2024-12-21 09:56:38.753 - error: ta-blnet.0 (1198552) Error during communication with device: Error: Max retries reached. Unable to communicate with device. 2024-12-21 09:56:38.805 - error: ta-blnet.0 (1198552) Error polling state values: Error: Max retries reached. Unable to communicate with device. 2024-12-21 09:57:40.805 - debug: ta-blnet.0 (1198552) Polling state values from devices: [32] 2024-12-21 09:57:40.806 - debug: ta-blnet.0 (1198552) fetchStateValuesFromDevice CMI for CAN node id: 32 2024-12-21 09:57:40.806 - debug: ta-blnet.0 (1198552) fetchJSONDataFromDevice for CAN node: 32 with data_objects: "I,O,D,Na,Nd,La,Ld" 2024-12-21 09:57:40.806 - debug: ta-blnet.0 (1198552) Initiate attempt to fetch JSON data from CMI 2024-12-21 09:57:40.806 - debug: ta-blnet.0 (1198552) Sending request to 192.168.178.204 with options: {"auth":"admin:admin","hostname":"192.168.178.204","port":80,"path":"/INCLUDE/api.cgi?jsonnode=32&jsonparam=I,O,D,Na,Nd,La,Ld","method":"GET"} 2024-12-21 09:57:40.806 - debug: ta-blnet.0 (1198552) Sending request as attempt: 1 2024-12-21 09:57:42.808 - debug: ta-blnet.0 (1198552) Response object on attempt 1: {"data":{"Header":{"Version":7,"Device":"91","Timestamp":1734775062},"Data":{"Inputs":[{"Number":1,"AD":"A","Value":{"Value":40.1,"Unit":"1"}},{"Number":2,"AD":"A","Value":{"Value":36.1,"Unit":"1"}},{"Number":3,"AD":"A","Value":{"Value":691,"Unit":"3"}},{"Number":4,"AD":"A","Value":{"Value":35.7,"Unit":"1"}},{"Number":5,"AD":"A","Value":{"Value":21.7,"Unit":"1"}},{"Number":6,"AD":"A","Value":{"Value":27.6,"Unit":"1"}}],"Outputs":[{"Number":1,"AD":"D","Value":{"Value":0,"Unit":"43"}},{"Number":2,"AD":"D","Value":{"Value":0,"Unit":"43"}}],"DL-Bus":[{"Number":1,"AD":"A","Value":{"Value":0,"Unit":"3"}},{"Number":2,"AD":"A","Value":{"Value":63.1,"Unit":"8"}},{"Number":3,"AD":"A","Value":{"Value":13.4,"Unit":"1"}},{"Number":4,"AD":"A","Value":{"Value":6.2,"Unit":"1"}}],"Logging Analog":[{"Number":1,"AD":"A","Value":{"Value":605,"Unit":"60"}},{"Number":2,"AD":"A","Value":{"Value":686,"Unit":"3"}},{"Number":16,"AD":"A","Value":{"Value":0,"Unit":"69"}},{"Number":17,"AD":"A","Value":{"Value":0,"Unit":"69"}}],"Logging Digital":[]},"Status":"OK","Status code":0},"httpStatusCode":200,"httpStatusMessage":"OK","debug":"Call to 192.168.178.204 returning 200: OK CMI Code: 0"} 2024-12-21 09:57:42.808 - debug: ta-blnet.0 (1198552) JS Record created from JSON response: {"Inputs":{"A01":{"value":40.1,"unit":"°C"},"A02":{"value":36.1,"unit":"°C"},"A03":{"value":691,"unit":"l/h"},"A04":{"value":35.7,"unit":"°C"},"A05":{"value":21.7,"unit":"°C"},"A06":{"value":27.6,"unit":"°C"}},"Outputs":{"D01":{"value":0,"unit":"ON/OFF"},"D02":{"value":0,"unit":"ON/OFF"}},"DL-Bus":{"A01":{"value":0,"unit":"l/h"},"A02":{"value":63.1,"unit":"%"},"A03":{"value":13.4,"unit":"°C"},"A04":{"value":6.2,"unit":"°C"}},"Logging Analog":{"A01":{"value":605,"unit":"h"},"A02":{"value":686,"unit":"l/h"},"A16":{"value":0,"unit":"W"},"A17":{"value":0,"unit":"W"}},"Logging Digital":{}} 2024-12-21 09:57:42.808 - debug: ta-blnet.0 (1198552) fetchStateValuesFromDevice successful. 2024-12-21 09:57:42.830 - debug: ta-blnet.0 (1198552) logging_analog status: {"A01":{"value":605,"unit":"h"},"A02":{"value":686,"unit":"l/h"},"A16":{"value":0,"unit":"W"},"A17":{"value":0,"unit":"W"}} 2024-12-21 09:57:42.893 - debug: ta-blnet.0 (1198552) logging_digital status: {} 2024-12-21 09:57:42.893 - debug: ta-blnet.0 (1198552) inputs status: {"A01":{"value":40.1,"unit":"°C"},"A02":{"value":36.1,"unit":"°C"},"A03":{"value":691,"unit":"l/h"},"A04":{"value":35.7,"unit":"°C"},"A05":{"value":21.7,"unit":"°C"},"A06":{"value":27.6,"unit":"°C"}} 2024-12-21 09:57:42.953 - debug: ta-blnet.0 (1198552) outputs status: {"D01":{"value":0,"unit":"ON/OFF"},"D02":{"value":0,"unit":"ON/OFF"}} 2024-12-21 09:57:43.000 - debug: ta-blnet.0 (1198552) network_analog section: undefined 2024-12-21 09:57:43.000 - debug: ta-blnet.0 (1198552) network_digital section: undefined 2024-12-21 09:57:43.001 - debug: ta-blnet.0 (1198552) dl-bus status: {"A01":{"value":0,"unit":"l/h"},"A02":{"value":63.1,"unit":"%"},"A03":{"value":13.4,"unit":"°C"},"A04":{"value":6.2,"unit":"°C"}} 2024-12-21 09:57:43.065 - debug: ta-blnet.0 (1198552) general section: undefined 2024-12-21 09:57:43.065 - debug: ta-blnet.0 (1198552) date section: undefined 2024-12-21 09:57:43.066 - debug: ta-blnet.0 (1198552) time section: undefined 2024-12-21 09:57:43.066 - debug: ta-blnet.0 (1198552) sun section: undefined 2024-12-21 09:57:43.066 - debug: ta-blnet.0 (1198552) electrical_power section: undefined 2024-12-21 09:57:43.066 - debug: ta-blnet.0 (1198552) electrical_power section: undefined 2024-12-21 09:57:43.066 - debug: ta-blnet.0 (1198552) mbus section: undefined 2024-12-21 09:57:43.066 - debug: ta-blnet.0 (1198552) m-bus section: undefined 2024-12-21 09:57:43.066 - debug: ta-blnet.0 (1198552) modbus section: undefined 2024-12-21 09:57:43.066 - debug: ta-blnet.0 (1198552) knx section: undefined 2024-12-21 09:57:43.066 - debug: ta-blnet.0 (1198552) objects for metrics updated. -
@weberk
läuft jetzt ca. 1h und habe die Uhrzeit der UVR (Minuten seit Tagesbeginn) in die DB schreiben lassen. Hat ab und zu Aussetzer...21.12.2024 10:29 637 true ta-blnet.0 21.12.2024 10:36 643 true ta-blnet.0 21.12.2024 10:38 645 true ta-blnet.0 21.12.2024 10:39 646 true ta-blnet.0 21.12.2024 10:41 648 true ta-blnet.0 21.12.2024 10:42 649 true ta-blnet.0 21.12.2024 10:44 651 true ta-blnet.0 21.12.2024 10:45 652 true ta-blnet.0 21.12.2024 10:47 654 true ta-blnet.0 21.12.2024 10:48 656 true ta-blnet.0 21.12.2024 10:50 658 true ta-blnet.0 21.12.2024 10:51 659 true ta-blnet.0 21.12.2024 10:53 661 true ta-blnet.0 21.12.2024 10:54 662 true ta-blnet.0 21.12.2024 10:57:03.091 664 true ta-blnet.0 21.12.2024 10:58 665 true ta-blnet.0 21.12.2024 11:00 667 true ta-blnet.0 21.12.2024 11:01 668 true ta-blnet.0 21.12.2024 11:03 670 true ta-blnet.0 21.12.2024 11:04 671 true ta-blnet.0 21.12.2024 11:06 673 true ta-blnet.0 21.12.2024 11:07 674 true ta-blnet.0 21.12.2024 11:09 676 true ta-blnet.0 21.12.2024 11:10 678 true ta-blnet.0 21.12.2024 11:12 680 true ta-blnet.0 21.12.2024 11:13 681 true ta-blnet.0 21.12.2024 11:15:56.023 683 true ta-blnet.0 21.12.2024 11:17 684 true ta-blnet.0 21.12.2024 11:19 686 true ta-blnet.0 21.12.2024 11:20 687 true ta-blnet.0 21.12.2024 11:22 689 true ta-blnet.0 21.12.2024 11:23 690 true ta-blnet.0Im Log ändert sich nichts gegenüber dem im vorherigen Posting
-
@ullij wieder was gelernt und in v1.0.35 wie folgt geändert:
- das Pollintervall kannst Du nun auch auf 10s setzen, da es nur darum geht längere Abfrageintervalle, als das Minimum zu erlauben
- intern wird vor jeder Abfrage immer 60 s gewartet, so dass in den meisten Fällen kein Retry notwendig sein wird.
Jetzt sollte die Adapterinstanz nach ca. 60 Sekunden grün werden und nach weiteren 60 Sekunden die Aktualisierung einsetzen.
-
Hi, auf den Adapter habe ich schon lange gewartet. Danke mal vorab. Installation habe ich über den github link durchgeführt. Einstellungen konnte ich nicht vornehmen da das Fenster sich nicht geöffnet hat. In liste der Instanzen taucht er nicht auf aber in den Objekten. Wo könnte das Problem sein? Danke nochmals
-
@weberk sagte in Test Adapter ta-blnet NPM/Latest":
v1.0.35 wie folgt geändert:
sieht geschmeidig aus
log ist ruhig, keine Warungen/Fehler. Habe jetzt nicht alles in den Spoiler kopiert.
Aktualisierung klappt auch
gut gemacht
Schöne Feiertage -
@tomowner
die Instanz musst Du manuell hinzufügen. Wird bei Adaptern von Github nicht automatisch gemacht -
@tomowner . Geht es jetzt mit Ullis Tipp?
Hast du v1.0.35? -
Hallo Zusammen,
Danke für die Hilfe. Instanz installiert und Verbindung steht. Es hat sich allerdings ein anderes Problem aufgetan (siehe Bilder)
Danke
-
@tomowner sieht so aus, als hättest du den BLNET-Modus aktiv, und eine UVR1611 per DL-Bus angebunden? Bitte hänge ein Text-Kopie des Logs des gesamten Startvorgangs an. Bitte die Instanz vor dem Testlauf auf Debug-Level schalten.
-
2024-12-23 10:43:43.129 - info: host.LenovoIObroker stopInstance system.adapter.ta-blnet.0 (force=false, process=true)
2024-12-23 10:43:43.134 - info: ta-blnet.0 (9601) Got terminate signal TERMINATE_YOURSELF
2024-12-23 10:43:43.135 - debug: ta-blnet.0 (9601) onUnload: Cleared orphan timeout.
2024-12-23 10:43:43.135 - info: ta-blnet.0 (9601) terminating
2024-12-23 10:43:43.136 - info: ta-blnet.0 (9601) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2024-12-23 10:43:43.226 - info: host.LenovoIObroker stopInstance system.adapter.ta-blnet.0 send kill signal
2024-12-23 10:43:43.636 - info: ta-blnet.0 (9601) terminating
2024-12-23 10:43:43.691 - info: host.LenovoIObroker instance system.adapter.ta-blnet.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2024-12-23 10:43:46.765 - info: easee.0 (9366) Token has expired - refresh
2024-12-23 10:43:46.924 - info: easee.0 (9366) RefreshToken successful
2024-12-23 10:43:47.086 - info: host.LenovoIObroker instance system.adapter.ta-blnet.0 in version "1.0.35" (non-npm: weberk/ioBroker.ta-blnet) started with pid 9660
2024-12-23 10:43:47.927 - debug: ta-blnet.0 (9660) Redis Objects: Use Redis connection: 127.0.0.1:9001
2024-12-23 10:43:47.950 - debug: ta-blnet.0 (9660) Objects client ready ... initialize now
2024-12-23 10:43:47.951 - debug: ta-blnet.0 (9660) Objects create System PubSub Client
2024-12-23 10:43:47.951 - debug: ta-blnet.0 (9660) Objects create User PubSub Client
2024-12-23 10:43:47.984 - debug: ta-blnet.0 (9660) Objects client initialize lua scripts
2024-12-23 10:43:47.988 - debug: ta-blnet.0 (9660) Objects connected to redis: 127.0.0.1:9001
2024-12-23 10:43:48.011 - debug: ta-blnet.0 (9660) Redis States: Use Redis connection: 127.0.0.1:9000
2024-12-23 10:43:48.020 - debug: ta-blnet.0 (9660) States create System PubSub Client
2024-12-23 10:43:48.021 - debug: ta-blnet.0 (9660) States create User PubSub Client
2024-12-23 10:43:48.078 - debug: ta-blnet.0 (9660) States connected to redis: 127.0.0.1:9000
2024-12-23 10:43:48.188 - info: ta-blnet.0 (9660) starting. Version 1.0.35 (non-npm: weberk/ioBroker.ta-blnet) in /opt/iobroker/node_modules/iobroker.ta-blnet, node: v20.18.1, js-controller: 7.0.3
2024-12-23 10:43:48.199 - info: ta-blnet.0 (9660) config ip_address: 192.168.1.199
2024-12-23 10:43:48.199 - info: ta-blnet.0 (9660) config port: 40000
2024-12-23 10:43:48.200 - info: ta-blnet.0 (9660) config poll_interval: 30
2024-12-23 10:43:48.200 - info: ta-blnet.0 (9660) expert_username: expert
2024-12-23 10:43:48.200 - info: ta-blnet.0 (9660) expert_password: password
2024-12-23 10:43:48.200 - info: ta-blnet.0 (9660) selected_ta_logger: BL-NET
2024-12-23 10:43:48.201 - info: ta-blnet.0 (9660) JavaScript Configuration Object: {"requests":[{"can_node_number":7,"data_objects":"La,Ld,I,O,Na,Nd,D"},{"can_node_number":11,"data_objects":"I,O"},{"can_node_number":45,"data_objects":"I,O,D,Sg,Sd,St,Ss,Sp,Na,Nd,M,AM,AK,La,Ld"}]}
2024-12-23 10:43:48.217 - debug: ta-blnet.0 (9660) onReady: Initialization time logger has changed.
2024-12-23 10:43:48.217 - debug: ta-blnet.0 (9660) Objects to be deleted for: ta-blnet.0
2024-12-23 10:43:48.218 - debug: ta-blnet.0 (9660) Deleting objects under ta-blnet.0.bl-net
2024-12-23 10:43:48.234 - debug: ta-blnet.0 (9660) Deleting objects under ta-blnet.0.cmi -
@tomowner dies sind die wesentlichen Parameter für den BL-NET:
said in [Test Adapter ta\-blnet NPM/Latest"](/post/1231522): > 2024-12-23 10:43:48.199 - info: ta-blnet.0 (9660) config ip_address: 192.168.1.199 > 2024-12-23 10:43:48.199 - info: ta-blnet.0 (9660) config port: 40000 > 2024-12-23 10:43:48.200 - info: ta-blnet.0 (9660) config poll_interval: 30 > 2024-12-23 10:43:48.200 - info: ta-blnet.0 (9660) selected_ta_logger: BL-NETWenn deine IP korrekt ist, sollte das passen.
Jetzt fehlt mir der nächste Teil des Logs, wo es um die eigentliche fehlerhafte Kommunikation geht.Es dauert nach der Ausgabe der Konfig-Werte noch weitere 30s, bis die erste Kommunikation startet, also etwas Geduld...
Aus deinen obigen Fehlermeldungen zu schliessen konnte der Adapter mit dem BLNET kurz erfolgreich reden, sonst würde er nicht wissen, dass dieser im 1DL-Modus arbeitet.
D.h. wenn dann im Anschluss nicht erfolgreich die Daten ausgelesen werden kann es nur an 2 Gründen liegen:- der BLNET ist überlastet. Bitte schalte andere Zugriffe auf den BLNET aus (z.B. Webbrowser)
- der BLNET denkt eine UVR1611 gilt es zu lesen und es kommen die Daten eines anderen Geräts rein.
Mal sehn, was Dein Log an Erklärungen hergibt. Bitte erläutere zusätzlich Deine tatsächliche Systemkonfiguration.
Klappt das Lesen der Daten mit Winsol? -
@tomowner sagte in Test Adapter ta-blnet NPM/Latest":
2024-12-23 10:43:48.201 - info: ta-blnet.0 (9660) JavaScript Configuration Object: {"requests":[{"can_node_number":7,"data_objects":"La,Ld,I,O,Na,Nd,D"},{"can_node_number":11,"data_objects":"I,O"},{"can_node_number":45,"data_objects":"I,O,D,Sg,Sd,St,Ss,Sp,Na,Nd,M,AM,AK,La,Ld"}]}
Json Konfiguration richtig? 3 Teilnehmer am Canbus? sieht irgendwie nach der Standardkonfig aus
-
Hallo Zusamnen,
bei Umbauarbeiten (BL wurde nur zur Visualisierung verendet) war statt der DL der Can Bus angeschlossen. Den Fehler habe ich jetzt behoben. Der Zugriff funktioniert jetzt auch leider sehe ich noch keine Daten.
Danke für die Hilfe
-
@tomowner ich bat ja um das Debug-Log unter 'Protokolle'.
Unter Deiner Instanz sind keine BL-NET-Objekte angelegt. Unter den sichtbaren technischen Objekten ist auch der LogLevel, der als Info eingestellt scheint. Bitte prüfe unter den Instanzeinstellungen, dass debug aktiv ist.
Hier mein Protokollabschnitt als Beispiel, wie ich ihn bitte auch von Dir brauche:
D.h. 1:1 aus dem Webbrowser rauskopiert. (Spoiler muss du anklicken, damit er sich öffnet).
Ach ja und die Frage nach Winsol hast Du noch nicht beantwortet: klappt es die aktuellen Daten mit Winsol zu lesen? -
@weberk Hi, ich habe gerade WinSol installiert und ausgelesen. In der Instanz ist jetzt auch alles vorhanden. Das Problem scheint gelöst zu sein. Danke für die Hilfe.
