js-controller Lucy (Version 7.0) jetzt im Stable Repository

jolic

Hallo Thomas, wie du vielleicht aus dem alten Thread iobroker-auf-manjaro-und-raspberry-4 weißt, nutze ich Manjaro ARM auf einem Pi4.

Der "iob fix" funktioniert nach wie vor wie im Thread beschrieben, mit Ausnahme der Debian-Warnungen wie „apt-get: Befehl nicht gefunden“ hier mit curl gestartet:

[pi4m@manjaro-arm ~]$ curl -fsSL https://iobroker.net/fix.sh | bash -
library: loaded
Library version=2024-10-22

==========================================================================

    Welcome to the ioBroker installation fixer!
    Script version: 2024-10-22
    
    You might need to enter your password a couple of times.

==========================================================================


==========================================================================
    Installing prerequisites (1/5)
==========================================================================

sudo: apt-get: Befehl nicht gefunden
sudo: apt-get: Befehl nicht gefunden
Installed acl
sudo: apt-get: Befehl nicht gefunden
Installed sudo
sudo: apt-get: Befehl nicht gefunden
Installed libcap2-bin
sudo: apt-get: Befehl nicht gefunden
Installed build-essential
sudo: apt-get: Befehl nicht gefunden
Installed gcc
sudo: apt-get: Befehl nicht gefunden
Installed make
sudo: apt-get: Befehl nicht gefunden
Installed libavahi-compat-libdnssd-dev
sudo: apt-get: Befehl nicht gefunden
Installed libudev-dev
sudo: apt-get: Befehl nicht gefunden
Installed libpam0g-dev
sudo: apt-get: Befehl nicht gefunden
Installed pkg-config
sudo: apt-get: Befehl nicht gefunden
Installed git
sudo: apt-get: Befehl nicht gefunden
Installed curl
sudo: apt-get: Befehl nicht gefunden
Installed unzip
sudo: apt-get: Befehl nicht gefunden
Installed distro-info
sudo: apt-get: Befehl nicht gefunden
Installed libcairo2-dev
sudo: apt-get: Befehl nicht gefunden
Installed libpango1.0-dev
sudo: apt-get: Befehl nicht gefunden
Installed libjpeg-dev
sudo: apt-get: Befehl nicht gefunden
Installed libgif-dev
sudo: apt-get: Befehl nicht gefunden
Installed librsvg2-dev
sudo: apt-get: Befehl nicht gefunden
Installed libpixman-1-dev
sudo: apt-get: Befehl nicht gefunden
Installed net-tools
sudo: apt-get: Befehl nicht gefunden
Installed cmake
sudo: apt-get: Befehl nicht gefunden
Installed polkitd
sudo: apt-get: Befehl nicht gefunden
Installed passwd

==========================================================================
    Checking ioBroker user and directory permissions (2/5)
==========================================================================

Created /etc/sudoers.d/iobroker
Fixing directory permissions...

==========================================================================
    Check and cleanup npm temporary directories (3/5)
==========================================================================

Done.

==========================================================================
    Database maintenance (4/5)
==========================================================================

Checking for uncompressed JSONL databases... This might take a while!

Compressing /opt/iobroker/iobroker-data/states.jsonl
Compressing /opt/iobroker/iobroker-data/objects.jsonl
Compressed 2 JSONL files. Done

==========================================================================
    Checking autostart (5/5)
==========================================================================

Enabling autostart...
Autostart enabled!

==========================================================================

    Your installation was fixed successfully
    Run iobroker start to start ioBroker again!

==========================================================================

Der "iob diag" hatte im August auch funktioniert, heute erhalte ich diese Meldung:

*** iob diag is starting up, please wait ***
iob diag needs to be updated. Please execute 'iobroker fix' first.

Mir ist bewusst, dass ioBroker offiziell nur Debian unterstützt und supportet. Aber vielleicht hast du trotzdem eine Idee, wie ich „iob diag“ unter Manjaro wieder zum Laufen bringen könnte?

Thomas Braun

@jolic sagte in js-controller Lucy (Version 7.0) jetzt im Stable Repository:

Aber vielleicht hast du trotzdem eine Idee, wie ich „iob diag“ unter Manjaro wieder zum Laufen bringen könnte?

Hab ich.

pacman -S distro-info

und es sollte laufen.

Mein EndeavourOS meldet sich nämlich so:

*** BASE SYSTEM ***
 Static hostname: roamer
       Icon name: computer-laptop
         Chassis: laptop 💻
Operating System: EndeavourOS
          Kernel: Linux 6.12.1-arch1-1
    Architecture: x86-64
 Hardware Vendor: Lenovo
  Hardware Model: Lenovo V17 G4 IRU
Firmware Version: MCCN29WW
   Firmware Date: Sun 2024-09-29
    Firmware Age: 2month 2d
OS is similar to: arch

model name      : 13th Gen Intel(R) Core(TM) i5-1335U
Docker          : false
Virtualization  : none
Kernel          : x86_64
Userland        : 64 bit

Systemuptime and Load:
 23:42:06 up 14:44,  2 users,  load average: 0.22, 0.33, 0.37
CPU threads: 12


*** LIFE CYCLE STATUS ***
Unknown release codenamed 'rolling'. Please check yourself if the Operating System is actively maintained.

jolic

@thomas-braun

Prima! langt die SUMMARY?
Nachtrag, wahrscheinlich nein, hier alles:

Script v.2024-10-19

*** BASE SYSTEM ***
 Static hostname: manjaro-arm
       Icon name: computer
Operating System: Manjaro ARM Linux
          Kernel: Linux 6.6.59-1-MANJARO-RPI4
    Architecture: arm64
OS is similar to: arch

Model           : Raspberry Pi 4 Model B Rev 1.5
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 64 bit

Systemuptime and Load:
 23:47:13 up  1:04,  2 users,  load average: 0.32, 0.33, 0.28
CPU threads: 4


*** LIFE CYCLE STATUS ***
Unknown release codenamed 'n/a'. Please check yourself if the Operating System is actively maintained.

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** TIME AND TIMEZONES ***
               Local time: Sat 2024-11-30 23:47:13 CET
           Universal time: Sat 2024-11-30 22:47:13 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
pi4m
HOME=/home/pi4m
GROUPS=sys network power users video storage lp input audio wheel pi4m iobroker

User that is running 'js-controller':
js-controller is not running

*** DISPLAY-SERVER SETUP ***
Display-Server: false
Desktop: 
Terminal:       tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            8.2G        302M        6.3G        3.1M        1.7G        7.9G
Swap:            12G          0B         12G
Total:           20G        302M         18G

Active iob-Instances:   1

         7806 M total memory
          289 M used memory
         1130 M active memory
          460 M inactive memory
         5989 M free memory
          118 M buffer memory
         1519 M swap cache
        11709 M total swap
            0 M used swap
        11709 M free swap

*** top - Table Of Processes  ***
top - 23:47:14 up  1:04,  2 users,  load average: 0.32, 0.33, 0.28
Tasks: 160 total,   3 running, 157 sleeping,   0 stopped,   0 zombie
%Cpu(s):  2.1 us,  4.2 sy,  0.0 ni, 93.8 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st 
MiB Mem :   7806.6 total,   5988.0 free,    290.4 used,   1638.3 buff/cache     
MiB Swap:  11710.0 total,  11710.0 free,      0.0 used.   7516.3 avail Mem 

*** FAILED SERVICES ***

  UNIT             LOAD   ACTIVE SUB    DESCRIPTION
* iobroker.service loaded failed failed ioBroker Server

Legend: LOAD   -> Reflects whether the unit definition was properly loaded.
        ACTIVE -> The high-level unit activation state, i.e. generalization of SUB.
        SUB    -> The low-level unit activation state, values depend on unit type.

1 loaded units listed.


*** DMESG CRITICAL ERRORS ***
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
dev            devtmpfs  3.8G     0  3.8G   0% /dev
run            tmpfs     3.9G  1.1M  3.9G   1% /run
/dev/sda2      ext4      917G  7.2G  873G   1% /
tmpfs          tmpfs     3.9G  1.9M  3.9G   1% /dev/shm
tmpfs          tmpfs     3.9G   20K  3.9G   1% /tmp
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/systemd-journald.service
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/systemd-network-generator.service
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/systemd-udev-load-credentials.service
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/systemd-tmpfiles-setup-dev-early.service
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/systemd-sysctl.service
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/systemd-tmpfiles-setup-dev.service
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/systemd-networkd.service
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/systemd-vconsole-setup.service
/dev/sda1      vfat      458M   51M  407M  12% /boot
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/systemd-tmpfiles-setup.service
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/getty@tty1.service
tmpfs          tmpfs     781M  4.0K  781M   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Sat Nov 30 22:42:51 2024] EXT4-fs (sda2): mounted filesystem 4f15f9f9-8c71-4493-986e-d850a02a0242 r/w with ordered data mode. Quota mode: none.
[Sat Nov 30 22:42:53 2024] EXT4-fs (sda2): re-mounted 4f15f9f9-8c71-4493-986e-d850a02a0242 r/w. Quota mode: none.

Show mounted filesystems:
TARGET  SOURCE    FSTYPE OPTIONS
/       /dev/sda2 ext4   rw,noatime
`-/boot /dev/sda1 vfat   rw,nodev,noexec,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,showexec,errors=remount-ro

Files in neuralgic directories:

/var:
526M    /var/
498M    /var/log
497M    /var/log/journal/256940e9bd0e49078df2cc99156a71f7
497M    /var/log/journal
23M     /var/lib/pacman

Archived and active journals take up 496.5M in the file system.

/opt/iobroker/backups:
11M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
1.1G    /opt/iobroker/iobroker-data/
950M    /opt/iobroker/iobroker-data/files
617M    /opt/iobroker/iobroker-data/files/javascript.admin
560M    /opt/iobroker/iobroker-data/files/javascript.admin/static
558M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js

The five largest files in iobroker-data are:
24M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map
24M     /opt/iobroker/iobroker-data/files/vis-2/static/js/main.f305bc29.js.map
24M     /opt/iobroker/iobroker-data/files/vis-2/static/js/main.8e80ccb0.js.map
24M     /opt/iobroker/iobroker-data/files/vis-2/customWidgets.js.map
13M     /opt/iobroker/iobroker-data/objects.jsonl

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

No Devices found 'by-id'

*** NodeJS-Installation ***

/usr/bin/nodejs         v20.18.0
/usr/bin/node           v20.18.0
/usr/bin/npm            10.9.0
/usr/bin/npx            10.9.0
/usr/bin/corepack       0.29.3

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is not running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
manjaro-arm         manjaro-arm (version: 7.0.3, hostname: manjaro-arm   , alive, uptime: 619)

Core adapters versions
js-controller:  7.0.3
admin:          7.1.5
javascript:     8.8.3

nodejs modules from github:     0

Adapter State
  system.adapter.admin.0                  : admin                 : manjaro-arm                              -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
  system.adapter.backitup.0               : backitup              : manjaro-arm                              -  enabled
  system.adapter.dwd.0                    : dwd                   : manjaro-arm                              -  enabled
  system.adapter.email.0                  : email                 : manjaro-arm                              -  enabled
  system.adapter.fullybrowser.0           : fullybrowser          : manjaro-arm                              -  enabled
  system.adapter.ical.0                   : ical                  : manjaro-arm                              -  enabled
  system.adapter.icons-fatcow-hosting.0   : icons-fatcow-hosting  : manjaro-arm                              - disabled
  system.adapter.javascript.0             : javascript            : manjaro-arm                              -  enabled
  system.adapter.mqtt.0                   : mqtt                  : manjaro-arm                              -  enabled, port: 1883, bind: 0.0.0.0
  system.adapter.ping.0                   : ping                  : manjaro-arm                              -  enabled
  system.adapter.shelly.0                 : shelly                : manjaro-arm                              -  enabled, port: 1882, bind: 0.0.0.0
  system.adapter.simple-api.0             : simple-api            : manjaro-arm                              -  enabled, port: 8087, bind: 192.168.0.164, run as: admin
  system.adapter.tr-064.0                 : tr-064                : manjaro-arm                              -  enabled
  system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: manjaro-arm                              -  enabled
  system.adapter.vis-2.0                  : vis-2                 : manjaro-arm                              -  enabled
  system.adapter.vis-fancyswitch.0        : vis-fancyswitch       : manjaro-arm                              -  enabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : manjaro-arm                              -  enabled
  system.adapter.vis-jqui-mfd.0           : vis-jqui-mfd          : manjaro-arm                              -  enabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : manjaro-arm                              -  enabled
  system.adapter.vis.0                    : vis                   : manjaro-arm                              -  enabled
  system.adapter.web.0                    : web                   : manjaro-arm                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
  system.adapter.yahka.0                  : yahka                 : manjaro-arm                              -  enabled
  system.adapter.zwave2.0                 : zwave2                : manjaro-arm                              -  enabled

+ instance is alive

Enabled adapters with bindings
  system.adapter.admin.0                  : admin                 : manjaro-arm                              -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
  system.adapter.mqtt.0                   : mqtt                  : manjaro-arm                              -  enabled, port: 1883, bind: 0.0.0.0
  system.adapter.shelly.0                 : shelly                : manjaro-arm                              -  enabled, port: 1882, bind: 0.0.0.0
  system.adapter.simple-api.0             : simple-api            : manjaro-arm                              -  enabled, port: 8087, bind: 192.168.0.164, run as: admin
  system.adapter.web.0                    : web                   : manjaro-arm                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
┌─────────┬────────────────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name               │ url                                                     │ auto upgrade │
├─────────┼────────────────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'Stable (default)' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'Beta (latest)'    │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴────────────────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): Stable (default)
Upgrade policy: none

Installed ioBroker-Instances
Used repository: Stable (default)
Adapter    "admin"        : 7.1.5    , installed 7.1.5
Adapter    "backitup"     : 3.0.25   , installed 3.0.25
Adapter    "dwd"          : 2.8.5    , installed 2.8.5
Adapter    "email"        : 1.3.1    , installed 1.3.1
Adapter    "fullybrowser" : 3.0.12   , installed 3.0.12
Adapter    "ical"         : 1.16.1   , installed 1.16.1
Adapter    "icons-fatcow-hosting": 0.1.0, installed 0.1.0
Adapter    "javascript"   : 8.8.3    , installed 8.8.3
Controller "js-controller": 7.0.3    , installed 7.0.3
Adapter    "mqtt"         : 6.1.2    , installed 6.1.2
Adapter    "ping"         : 1.6.2    , installed 1.6.2
Adapter    "shelly"       : 8.2.1    , installed 8.2.1
Adapter    "simple-api"   : 2.8.0    , installed 2.8.0
Adapter    "socketio"     : 6.7.1    , installed 6.7.1
Adapter    "tr-064"       : 4.3.0    , installed 4.3.0
Adapter    "vis"          : 1.5.6    , installed 1.5.6
Adapter    "vis-2"        : 2.9.64   , installed 2.9.64
Adapter    "vis-2-widgets-material": 1.4.10, installed 1.4.10
Adapter    "vis-fancyswitch": 1.1.0  , installed 1.1.0
Adapter    "vis-hqwidgets": 1.5.1    , installed 1.5.1
Adapter    "vis-jqui-mfd" : 1.1.1    , installed 1.1.1
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "web"          : 6.2.5    , installed 6.2.5
Adapter    "ws"           : 2.6.2    , installed 2.6.2
Adapter    "yahka"        : 1.0.3    , installed 1.0.3
Adapter    "zwave2"       : 3.1.0    , installed 3.1.0

Objects and States
Please stand by - This may take a while
Objects:        2325
States:         1800

*** OS-Repositories and Updates ***
No Debian-based Linux detected.

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name    
tcp        0      0 127.0.0.1:4711          0.0.0.0:*               LISTEN      968        5055       563/pihole-FTL      
tcp        0      0 127.0.0.1:5335          0.0.0.0:*               LISTEN      0          5975       450/unbound         
tcp        0      0 0.0.0.0:53              0.0.0.0:*               LISTEN      968        5051       563/pihole-FTL      
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          4094       552/sshd: /usr/bin/ 
tcp        0      0 0.0.0.0:80              0.0.0.0:*               LISTEN      0          3973       472/lighttpd        
tcp6       0      0 ::1:4711                :::*                    LISTEN      968        5056       563/pihole-FTL      
tcp6       0      0 :::53                   :::*                    LISTEN      968        5053       563/pihole-FTL      
tcp6       0      0 :::22                   :::*                    LISTEN      0          4096       552/sshd: /usr/bin/ 
udp        0      0 0.0.0.0:53              0.0.0.0:*                           968        5050       563/pihole-FTL      
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          6685       453/dhcpcd: [networ 
udp        0      0 127.0.0.1:5335          0.0.0.0:*                           0          5974       450/unbound         
udp6       0      0 :::53                   :::*                                968        5052       563/pihole-FTL      
udp6       0      0 :::546                  :::*                                0          6687       453/dhcpcd: [networ 

*** Log File - Last 25 Lines ***

2024-11-30 23:06:39.942  - info: host.manjaro-arm instance system.adapter.mqtt.0 terminated with code 0 (NO_ERROR)
2024-11-30 23:06:40.004  - info: host.manjaro-arm instance system.adapter.shelly.0 terminated with code 0 (NO_ERROR)
2024-11-30 23:06:40.004  - info: host.manjaro-arm instance system.adapter.backitup.0 terminated with code 0 (NO_ERROR)
2024-11-30 23:06:40.124  - info: host.manjaro-arm stopInstance timeout system.adapter.javascript.0 killing pid 1637
2024-11-30 23:06:40.125  - info: host.manjaro-arm stopInstance timeout system.adapter.ping.0 killing pid 1727
2024-11-30 23:06:40.125  - info: host.manjaro-arm stopInstance timeout system.adapter.zwave2.0 killing pid 1769
2024-11-30 23:06:40.126  - info: host.manjaro-arm stopInstance timeout system.adapter.web.0 killing pid 1875
2024-11-30 23:06:40.262  - info: host.manjaro-arm instance system.adapter.email.0 terminated with code 0 (NO_ERROR)
2024-11-30 23:06:40.263  - info: host.manjaro-arm instance system.adapter.tr-064.0 terminated with code 0 (NO_ERROR)
2024-11-30 23:06:40.286  - info: host.manjaro-arm instance system.adapter.admin.0 terminated with code 0 (NO_ERROR)
2024-11-30 23:06:40.343  - info: host.manjaro-arm instance system.adapter.fullybrowser.0 terminated with code 0 (NO_ERROR)
2024-11-30 23:06:40.343  - info: host.manjaro-arm All instances are stopped.
2024-11-30 23:06:40.544  - warn: host.manjaro-arm instance system.adapter.javascript.0 terminated due to SIGKILL
2024-11-30 23:06:40.544  - info: host.manjaro-arm instance system.adapter.javascript.0 terminated with code null ()
2024-11-30 23:06:40.545  - info: host.manjaro-arm All instances are stopped.
2024-11-30 23:06:40.545  - warn: host.manjaro-arm instance system.adapter.ping.0 terminated due to SIGKILL
2024-11-30 23:06:40.545  - info: host.manjaro-arm instance system.adapter.ping.0 terminated with code null ()
2024-11-30 23:06:40.545  - info: host.manjaro-arm All instances are stopped.
2024-11-30 23:06:40.585  - warn: host.manjaro-arm instance system.adapter.zwave2.0 terminated due to SIGKILL
2024-11-30 23:06:40.585  - info: host.manjaro-arm instance system.adapter.zwave2.0 terminated with code null ()
2024-11-30 23:06:40.585  - info: host.manjaro-arm All instances are stopped.
2024-11-30 23:06:40.586  - warn: host.manjaro-arm instance system.adapter.web.0 terminated due to SIGKILL
2024-11-30 23:06:40.586  - info: host.manjaro-arm instance system.adapter.web.0 terminated with code null ()
2024-11-30 23:06:40.586  - info: host.manjaro-arm All instances are stopped.
2024-11-30 23:06:40.750  - info: host.manjaro-arm terminated

======================= SUMMARY =======================
                        v.2024-10-19


 Static hostname: manjaro-arm
       Icon name: computer
Operating System: Manjaro ARM Linux
          Kernel: Linux 6.6.59-1-MANJARO-RPI4
    Architecture: arm64

Installation:           native
Kernel:                 aarch64
Userland:               64 bit
Timezone:               Europe/Berlin (CET, +0100)
User-ID:                1000
Display-Server:         false
Boot Target:            multi-user.target

Pending OS-Updates:     0
Pending iob updates:    0

Nodejs-Installation:
/usr/bin/nodejs         v20.18.0
/usr/bin/node           v20.18.0
/usr/bin/npm            10.9.0
/usr/bin/npx            10.9.0
/usr/bin/corepack       0.29.3

Recommended versions are nodejs 20.18.1 and npm 10.8.2
nodeJS installation is correct

MEMORY: 
               total        used        free      shared  buff/cache   available
Mem:            8.2G        297M        6.3G        3.1M        1.7G        7.9G
Swap:            12G          0B         12G
Total:           20G        297M         18G

Active iob-Instances:   1
Upgrade policy: none

ioBroker Core:          js-controller           7.0.3
                        admin                   7.1.5

ioBroker Status:        iobroker is not running on this host.


Objects type: jsonl
States  type: jsonl

Status admin and web instance:
  system.adapter.admin.0                  : admin                 : manjaro-arm                              -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
  system.adapter.web.0                    : web                   : manjaro-arm                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

Objects:                2325
States:                 1800

Size of iob-Database:

13M     /opt/iobroker/iobroker-data/objects.jsonl
376K    /opt/iobroker/iobroker-data/states.jsonl


Unknown release codenamed 'n/a'. Please check yourself if the Operating System is actively maintained.

=================== END OF SUMMARY ====================

Thomas Braun

@jolic
Außer, das der ioBroker nicht läuft, sieht man da halt nicht viel.

jolic

@thomas-braun

Ja, hatte zu schnell "Press any key for a summary" gedrückt, habe oben alles hinzugefügt. Erkennst du dort ein Problem?

Thomas Braun

@jolic

Der ioBroker läuft halt nicht.

*** FAILED SERVICES ***

  UNIT             LOAD   ACTIVE SUB    DESCRIPTION
* iobroker.service loaded failed failed ioBroker Server

Startet der nicht per

iob start

Dann mal in den

systemctl status iobroker.service

werfen.

jolic

@thomas-braun
Sorry, war wegen "iob fix", sicherheitshalber mache ich nun ein reboot und dann nocheinmal eine "iob diag".

jolic

@thomas-braun

2ter Versuch, ioB läuft und keine Fehler im Webinterface Protokoll, iob diag:

Script v.2024-10-19

*** BASE SYSTEM ***
 Static hostname: manjaro-arm
       Icon name: computer
Operating System: Manjaro ARM Linux
          Kernel: Linux 6.6.59-1-MANJARO-RPI4
    Architecture: arm64
OS is similar to: arch

Model           : Raspberry Pi 4 Model B Rev 1.5
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 64 bit

Systemuptime and Load:
 00:02:46 up 5 min,  2 users,  load average: 1.13, 1.00, 0.48
CPU threads: 4


*** LIFE CYCLE STATUS ***
Unknown release codenamed 'n/a'. Please check yourself if the Operating System is actively maintained.

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** TIME AND TIMEZONES ***
               Local time: Sun 2024-12-01 00:02:47 CET
           Universal time: Sat 2024-11-30 23:02:47 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
pi4m
HOME=/home/pi4m
GROUPS=sys network power users video storage lp input audio wheel pi4m iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
SUDO_HOME=/home/pi4m
GROUPS=tty video uucp audio iobroker

*** DISPLAY-SERVER SETUP ***
Display-Server: false
Desktop: 
Terminal:       tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            8.2G        1.4G        6.2G        2.7M        660M        6.8G
Swap:            12G          0B         12G
Total:           20G        1.4G         18G

Active iob-Instances:   15

         7806 M total memory
         1335 M used memory
         1321 M active memory
          347 M inactive memory
         5950 M free memory
           77 M buffer memory
          552 M swap cache
        11709 M total swap
            0 M used swap
        11709 M free swap

*** top - Table Of Processes  ***
top - 00:02:48 up 5 min,  2 users,  load average: 1.13, 1.00, 0.48
Tasks: 177 total,   1 running, 176 sleeping,   0 stopped,   0 zombie
%Cpu(s):  2.0 us,  3.9 sy,  0.0 ni, 94.1 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st 
MiB Mem :   7806.6 total,   5949.5 free,   1336.6 used,    630.3 buff/cache     
MiB Swap:  11710.0 total,  11710.0 free,      0.0 used.   6470.1 avail Mem 

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION

0 loaded units listed.


*** DMESG CRITICAL ERRORS ***
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
dev            devtmpfs  3.8G     0  3.8G   0% /dev
run            tmpfs     3.9G  744K  3.9G   1% /run
/dev/sda2      ext4      917G  7.1G  873G   1% /
tmpfs          tmpfs     3.9G  1.9M  3.9G   1% /dev/shm
tmpfs          tmpfs     3.9G   20K  3.9G   1% /tmp
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/systemd-journald.service
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/systemd-network-generator.service
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/systemd-udev-load-credentials.service
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/systemd-sysctl.service
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/systemd-tmpfiles-setup-dev-early.service
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/systemd-sysusers.service
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/systemd-tmpfiles-setup-dev.service
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/systemd-networkd.service
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/systemd-vconsole-setup.service
/dev/sda1      vfat      458M   51M  407M  12% /boot
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/systemd-tmpfiles-setup.service
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/getty@tty1.service
tmpfs          tmpfs     781M  4.0K  781M   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Sat Nov 30 23:57:45 2024] EXT4-fs (sda2): mounted filesystem 4f15f9f9-8c71-4493-986e-d850a02a0242 r/w with ordered data mode. Quota mode: none.
[Sat Nov 30 23:57:48 2024] EXT4-fs (sda2): re-mounted 4f15f9f9-8c71-4493-986e-d850a02a0242 r/w. Quota mode: none.

Show mounted filesystems:
TARGET  SOURCE    FSTYPE OPTIONS
/       /dev/sda2 ext4   rw,noatime
`-/boot /dev/sda1 vfat   rw,nodev,noexec,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,showexec,errors=remount-ro

Files in neuralgic directories:

/var:
456M    /var/
428M    /var/log
427M    /var/log/journal/256940e9bd0e49078df2cc99156a71f7
427M    /var/log/journal
23M     /var/lib/pacman

Archived and active journals take up 426.2M in the file system.

/opt/iobroker/backups:
11M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
1.1G    /opt/iobroker/iobroker-data/
950M    /opt/iobroker/iobroker-data/files
617M    /opt/iobroker/iobroker-data/files/javascript.admin
560M    /opt/iobroker/iobroker-data/files/javascript.admin/static
558M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js

The five largest files in iobroker-data are:
24M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map
24M     /opt/iobroker/iobroker-data/files/vis-2/static/js/main.f305bc29.js.map
24M     /opt/iobroker/iobroker-data/files/vis-2/static/js/main.8e80ccb0.js.map
24M     /opt/iobroker/iobroker-data/files/vis-2/customWidgets.js.map
14M     /opt/iobroker/iobroker-data/objects.jsonl

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

No Devices found 'by-id'

*** NodeJS-Installation ***

/usr/bin/nodejs         v20.18.0
/usr/bin/node           v20.18.0
/usr/bin/npm            10.9.0
/usr/bin/npx            10.9.0
/usr/bin/corepack       0.29.3

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
manjaro-arm         manjaro-arm (version: 7.0.3, hostname: manjaro-arm   , alive, uptime: 306)

Core adapters versions
js-controller:  7.0.3
admin:          7.1.5
javascript:     8.8.3

nodejs modules from github:     0

Adapter State
+ system.adapter.admin.0                  : admin                 : manjaro-arm                              -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.backitup.0               : backitup              : manjaro-arm                              -  enabled
  system.adapter.dwd.0                    : dwd                   : manjaro-arm                              -  enabled
+ system.adapter.email.0                  : email                 : manjaro-arm                              -  enabled
+ system.adapter.fullybrowser.0           : fullybrowser          : manjaro-arm                              -  enabled
  system.adapter.ical.0                   : ical                  : manjaro-arm                              -  enabled
  system.adapter.icons-fatcow-hosting.0   : icons-fatcow-hosting  : manjaro-arm                              - disabled
+ system.adapter.javascript.0             : javascript            : manjaro-arm                              -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : manjaro-arm                              -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.ping.0                   : ping                  : manjaro-arm                              -  enabled
+ system.adapter.shelly.0                 : shelly                : manjaro-arm                              -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : manjaro-arm                              -  enabled, port: 8087, bind: 192.168.0.164, run as: admin
+ system.adapter.tr-064.0                 : tr-064                : manjaro-arm                              -  enabled
  system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: manjaro-arm                              -  enabled
+ system.adapter.vis-2.0                  : vis-2                 : manjaro-arm                              -  enabled
  system.adapter.vis-fancyswitch.0        : vis-fancyswitch       : manjaro-arm                              -  enabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : manjaro-arm                              -  enabled
  system.adapter.vis-jqui-mfd.0           : vis-jqui-mfd          : manjaro-arm                              -  enabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : manjaro-arm                              -  enabled
  system.adapter.vis.0                    : vis                   : manjaro-arm                              -  enabled
+ system.adapter.web.0                    : web                   : manjaro-arm                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.yahka.0                  : yahka                 : manjaro-arm                              -  enabled
+ system.adapter.zwave2.0                 : zwave2                : manjaro-arm                              -  enabled

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : manjaro-arm                              -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.mqtt.0                   : mqtt                  : manjaro-arm                              -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.shelly.0                 : shelly                : manjaro-arm                              -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : manjaro-arm                              -  enabled, port: 8087, bind: 192.168.0.164, run as: admin
+ system.adapter.web.0                    : web                   : manjaro-arm                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
┌─────────┬────────────────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name               │ url                                                     │ auto upgrade │
├─────────┼────────────────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'Stable (default)' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'Beta (latest)'    │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴────────────────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): Stable (default)
Upgrade policy: none

Installed ioBroker-Instances
Used repository: Stable (default)
Adapter    "admin"        : 7.1.5    , installed 7.1.5
Adapter    "backitup"     : 3.0.25   , installed 3.0.25
Adapter    "dwd"          : 2.8.5    , installed 2.8.5
Adapter    "email"        : 1.3.1    , installed 1.3.1
Adapter    "fullybrowser" : 3.0.12   , installed 3.0.12
Adapter    "ical"         : 1.16.1   , installed 1.16.1
Adapter    "icons-fatcow-hosting": 0.1.0, installed 0.1.0
Adapter    "javascript"   : 8.8.3    , installed 8.8.3
Controller "js-controller": 7.0.3    , installed 7.0.3
Adapter    "mqtt"         : 6.1.2    , installed 6.1.2
Adapter    "ping"         : 1.6.2    , installed 1.6.2
Adapter    "shelly"       : 8.2.1    , installed 8.2.1
Adapter    "simple-api"   : 2.8.0    , installed 2.8.0
Adapter    "socketio"     : 6.7.1    , installed 6.7.1
Adapter    "tr-064"       : 4.3.0    , installed 4.3.0
Adapter    "vis"          : 1.5.6    , installed 1.5.6
Adapter    "vis-2"        : 2.9.64   , installed 2.9.64
Adapter    "vis-2-widgets-material": 1.4.10, installed 1.4.10
Adapter    "vis-fancyswitch": 1.1.0  , installed 1.1.0
Adapter    "vis-hqwidgets": 1.5.1    , installed 1.5.1
Adapter    "vis-jqui-mfd" : 1.1.1    , installed 1.1.1
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "web"          : 6.2.5    , installed 6.2.5
Adapter    "ws"           : 2.6.2    , installed 2.6.2
Adapter    "yahka"        : 1.0.3    , installed 1.0.3
Adapter    "zwave2"       : 3.1.0    , installed 3.1.0

Objects and States
Please stand by - This may take a while
Objects:        2325
States:         1952

*** OS-Repositories and Updates ***
No Debian-based Linux detected.

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name    
tcp        0      0 127.0.0.1:38919         0.0.0.0:*               LISTEN      1001       15199      1131/io.yahka.0     
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       7840       557/iobroker.js-con 
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       1015       557/iobroker.js-con 
tcp        0      0 127.0.0.1:4711          0.0.0.0:*               LISTEN      968        6421       571/pihole-FTL      
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          919        559/sshd: /usr/bin/ 
tcp        0      0 0.0.0.0:53              0.0.0.0:*               LISTEN      968        7466       571/pihole-FTL      
tcp        0      0 0.0.0.0:80              0.0.0.0:*               LISTEN      0          8248       471/lighttpd        
tcp        0      0 192.168.0.164:8087      0.0.0.0:*               LISTEN      1001       15568      1092/io.simple-api. 
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       6669       997/io.mqtt.0       
tcp        0      0 0.0.0.0:42169           0.0.0.0:*               LISTEN      1001       15193      1131/io.yahka.0     
tcp        0      0 127.0.0.1:5335          0.0.0.0:*               LISTEN      0          7390       460/unbound         
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       8446       789/io.admin.0      
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       15166      1112/io.web.0       
tcp6       0      0 ::1:4711                :::*                    LISTEN      968        6422       571/pihole-FTL      
tcp6       0      0 :::22                   :::*                    LISTEN      0          921        559/sshd: /usr/bin/ 
tcp6       0      0 :::53                   :::*                    LISTEN      968        7468       571/pihole-FTL      
udp        0      0 127.0.0.1:5335          0.0.0.0:*                           0          7389       460/unbound         
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           1001       15195      1131/io.yahka.0     
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           1001       15194      1131/io.yahka.0     
udp        0      0 192.168.0.164:5353      0.0.0.0:*                           1001       13543      1037/io.tr-064.0    
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       11209      1026/io.shelly.0    
udp        0      0 0.0.0.0:53              0.0.0.0:*                           968        7465       571/pihole-FTL      
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          6273       457/dhcpcd: [networ 
udp6       0      0 :::53                   :::*                                968        7467       571/pihole-FTL      
udp6       0      0 :::546                  :::*                                0          6275       457/dhcpcd: [networ 

*** Log File - Last 25 Lines ***

2024-12-01 00:00:00.111  - info: host.manjaro-arm instance system.adapter.ical.0 in version "1.16.1" started with pid 1177
2024-12-01 00:00:02.735  - info: admin.0 (789) failed connection to socket.io from ::ffff:192.168.0.45: Passport was not initialized
2024-12-01 00:00:03.497  - info: ical.0 (1177) starting. Version 1.16.1 in /opt/iobroker/node_modules/iobroker.ical, node: v20.18.0, js-controller: 7.0.3
2024-12-01 00:00:04.045  - info: ical.0 (1177) processing URL: AbfuhrkalenderMasholder https://art-trier.de/ics-feed/54634:Bitburg-Masholder::Masholder@.ics
2024-12-01 00:00:04.097  - info: javascript.0 (860) script.js.common.Abfall: <table class='Abfall'><tr><td class='Abfallimage'><img width='80' height='80' src='/vis-2.0/Abfall/gelber_sack_und_papierabfall.png'></td><td class='Abfallimage'><img width='80' height='80' src='/vis-2.0/Abfall/restmuell.png'></td><td class='Abfallimage'><img width='80' height='80' src='/vis-2.0/Abfall/restmuell.png'></td><td class='Abfallimage'><img width='80' height='80' src='/vis-2.0/Abfall/gelber_sack_und_papierabfall.png'></td></tr><tr><td class='AbfallText'>02.12.2024</td><td class='AbfallText'>12.12.2024</td><td class='AbfallText'>27.12.2024</td><td class='AbfallText'>30.12.2024</td></tr></table>
2024-12-01 00:00:07.559  - info: admin.0 (789) ==> Connected system.user.admin from ::ffff:192.168.0.45
2024-12-01 00:00:09.334  - info: ical.0 (1177) Terminated (NO_ERROR): Without reason
2024-12-01 00:00:10.238  - info: host.manjaro-arm instance system.adapter.ical.0 having pid 1177 terminated with code 0 (NO_ERROR)
2024-12-01 00:00:45.047  - info: host.manjaro-arm instance system.adapter.dwd.0 in version "2.8.5" started with pid 1280
2024-12-01 00:00:47.463  - info: dwd.0 (1280) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v20.18.0, js-controller: 7.0.3
2024-12-01 00:00:48.030  - info: dwd.0 (1280) State value to set for "dwd.0.warning1.begin" has to be type "string" but received type "number" 
2024-12-01 00:00:48.079  - info: dwd.0 (1280) State value to set for "dwd.0.warning1.end" has to be type "string" but received type "number" 
2024-12-01 00:00:48.185  - info: dwd.0 (1280) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2024-12-01 00:00:48.769  - info: host.manjaro-arm instance system.adapter.dwd.0 having pid 1280 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2024-12-01 00:00:49.838  - info: web.0 (1112) ==> Connected system.user.admin from ::ffff:192.168.0.3
2024-12-01 00:00:52.057  - info: web.0 (1112) <== Disconnect system.user.admin from ::ffff:192.168.0.3 vis-2
2024-12-01 00:00:56.783  - info: web.0 (1112) ==> Connected system.user.admin from ::ffff:192.168.0.3
2024-12-01 00:00:57.410  - info: javascript.0 (860) script.js.common.tabletLadestatus: Tablet Akku 30%  -> Ladestrom einschalten

======================= SUMMARY =======================
                        v.2024-10-19


 Static hostname: manjaro-arm
       Icon name: computer
Operating System: Manjaro ARM Linux
          Kernel: Linux 6.6.59-1-MANJARO-RPI4
    Architecture: arm64

Installation:           native
Kernel:                 aarch64
Userland:               64 bit
Timezone:               Europe/Berlin (CET, +0100)
User-ID:                1000
Display-Server:         false
Boot Target:            multi-user.target

Pending OS-Updates:     0
Pending iob updates:    0

Nodejs-Installation:
/usr/bin/nodejs         v20.18.0
/usr/bin/node           v20.18.0
/usr/bin/npm            10.9.0
/usr/bin/npx            10.9.0
/usr/bin/corepack       0.29.3

Recommended versions are nodejs 20.18.1 and npm 10.8.2
nodeJS installation is correct

MEMORY: 
               total        used        free      shared  buff/cache   available
Mem:            8.2G        1.5G        5.3G        2.7M        1.5G        6.7G
Swap:            12G          0B         12G
Total:           20G        1.5G         17G

Active iob-Instances:   15
Upgrade policy: none

ioBroker Core:          js-controller           7.0.3
                        admin                   7.1.5

ioBroker Status:        iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Status admin and web instance:
+ system.adapter.admin.0                  : admin                 : manjaro-arm                              -  enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
+ system.adapter.web.0                    : web                   : manjaro-arm                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

Objects:                2325
States:                 1952

Size of iob-Database:

14M     /opt/iobroker/iobroker-data/objects.jsonl
728K    /opt/iobroker/iobroker-data/states.jsonl


Unknown release codenamed 'n/a'. Please check yourself if the Operating System is actively maintained.

=================== END OF SUMMARY ====================

Thomas Braun

@jolic

Schaut doch gut aus.
Zu vis2 und cams kann ich aber nix sagen.

jolic

@thomas-braun

OK, trotzdem vielen Dank für deine großartige Unterstützung und den Hinweis auf die "distro-info"!

Das mit dem Refresh der Bilder ist wirklich kurios. Mal sehen, ob es an mir liegt oder ob jemand anderes ein ähnliches Problem hat. Falls jemand das bestätigen oder eine Lösung anbieten kann, gerne Bescheid geben!

Ich habe mir das im Browser über die Konsole (F12) im Tab "Netzwerk" angesehen. Dort sehe ich, dass der Webcam-Snapshot geladen wird, aber es gibt scheinbar keinen "Refresh". Das könnte also an VIS2 liegen. Blöd, dass mir das nicht früher aufgefallen ist. Ich werde mal weiter nachforschen...

jolic

Es scheint ein Bug in VIS2 zu sein. Tatsächlich ist mir das zunächst nicht aufgefallen – es handelt sich ja um Standbilder, die nur alle paar Sekunden wechseln. Ich lasse nun die Uhrzeit im Bild einblenden.

github Quellen:
Basic image does not refresh itself anymore when using a binding
und
Basic Image Updatezeit V2.9.50

Sorry, dass ich den Thread dafür genutzt habe. Anfangs sah es so aus, als würde das Problem am neuen JS-Controller liegen – dieser läuft aber absolut problemlos!

Nachtrag: Ich habe als Workaround ein Script geschrieben, das mit mehreren Widgets funktioniert (GitHub Link).

steinchen

Leider startet nach update des js-controllers mein Lupusec Adapter nicht mehr.
eine neuinstallation des Adapters hat nicht geholfen.
Was könnte ich denn da tun ?

vg steinchen

Thomas Braun

@steinchen

Du könntest den Text aus dem LogFile

iob logs --watch

in Textform in CodeTags eingebettet posten und nicht als Screenshot.
Und du könntest die empfohlene nodejs-Version verwenden...

iob nodejs-update

steinchen

@thomas-braun

so hier ein neuer Versuch

2024-12-02 13:22:07.346  - info: host.lichtenhain instance system.adapter.lupusec.0 terminated with code 0 (NO_ERROR)
2024-12-02 13:22:07.347  - info: host.lichtenhain Restart adapter system.adapter.lupusec.0 because enabled
2024-12-02 13:22:38.156  - info: host.lichtenhain instance system.adapter.lupusec.0 in version "1.3.6" started with pid 1867
2024-12-02 13:22:41.378  - info: lupusec.0 (1867) Plugin sentry Sentry Plugin disabled for this process because sending of statistic data is disabled for the system
2024-12-02 13:22:41.553  - info: lupusec.0 (1867) starting. Version 1.3.6 in /opt/iobroker/node_modules/iobroker.lupusec, node: v18.20.4, js-controller: 7.0.3
2024-12-02 13:22:41.579  - info: lupusec.0 (1867) Starting Adapter lupusec.0 in version 1.3.6
2024-12-02 13:22:41.693  - info: lupusec.0 (1867) Restarting Adapter because of changeing Sentry settings
2024-12-02 13:22:41.694  - warn: lupusec.0 (1867) Restart initiated
2024-12-02 13:22:41.704  - info: lupusec.0 (1867) terminating
2024-12-02 13:22:41.706  - info: lupusec.0 (1867) Terminated (NO_ERROR): Without reason
2024-12-02 13:22:42.202  - info: lupusec.0 (1867) terminating
2024-12-02 13:22:42.305  - info: host.lichtenhain instance system.adapter.lupusec.0 terminated with code 0 (NO_ERROR)
2024-12-02 13:22:42.306  - info: host.lichtenhain Restart adapter system.adapter.lupusec.0 because enabled

steinchen

@thomas-braun

hab leider noch Debian Buster

Debian 10 'Buster' has reached End of Life and is not supported anymore.
Recent versions of nodejs won't install.
Please install the current Debian Stable

Thomas Braun

@steinchen sagte in js-controller Lucy (Version 7.0) jetzt im Stable Repository:

hab leider noch Debian Buster

Dann musst du das als erstes ändern. Buster ist mehr als tot.

mcm1957

@steinchen said in js-controller Lucy (Version 7.0) jetzt im Stable Repository:

Leider startet nach update des js-controllers mein Lupusec Adapter nicht mehr.
eine neuinstallation des Adapters hat nicht geholfen.
Was könnte ich denn da tun ?

vg steinchen

Welche Version des js-controllers hattest du vorher drauf?

An sich ist es bekannt, dass der Adapter Probleme macht:

https://github.com/schmupu/ioBroker.lupusec/issues/84

Versuch mal ausnahmsweise (!) die Version 2.0 von Github zu installieren - vorzugsweise auf einem Testsystem. Von dIrekten GitHub Installationen wird jedenfalls weiterhin abgeraten und ich sage ausdrücklich nur bei einwandfreiem Backup und unter dem Bewuußtsein eine ALPHA Version zu installieren eventuell ausprobieren.

Und schreib dem Maintainer an dass er doch bitte eine saubere Releas 2.x.x erstellen soll...

steinchen

@mcm1957
jo, mit der 2.x von Github geht es

ich habe Ihn auf Git angeschrieben, hattest du ja auch :)

danke erstmal.

@Thomas-Braun

update wird auf einem pi5 gemacht, ist schon in der Vorbereitung.
trotzdem meinen Dank

Thomas Braun

@steinchen sagte in js-controller Lucy (Version 7.0) jetzt im Stable Repository:

update wird auf einem pi5 gemacht

Neuinstallation. Vob Buster führt keine Weg zu Bookworm.

steinchen

@thomas-braun
mein ich doch :)
neuer Pi mit Neuinstallation

Community Forum

NEWS

js-controller Lucy (Version 7.0) jetzt im Stable Repository

Support us

787

32.4k

81.4k

1.3m