Homematic IP Cloud Adapter lässt sich nicht installieren

Homoran

@lukas8519 was kommt bei iob install hmip --debug ?

Thomas Braun

@lukas8519 sagte in Homematic IP Cloud Adapter lässt sich nicht installieren:

NPM version: 8.19.3

Deutet aber auch auf eine alte Version von nodejs hin.

Homoran

@thomas-braun

@lukas8519
dann bitte auch die Langfassung von iob diag

weil...

    "dependencies": [
      {
        "js-controller": ">=5.0.19"
      }
    ],
    "globalDependencies": [
      {
        "admin": ">=6.13.16"
      }
    ],

lukas8519

@homoran

lukas@iobroker:~ $ iob install hmip --debug
NPM version: 8.19.3
Installing iobroker.hmip@1.24.3... (System call)
npm ERR! code EBADENGINE
npm ERR! engine Unsupported engine
npm ERR! engine Not compatible with your version of node/npm: iobroker.hmip@1.24.3
npm ERR! notsup Not compatible with your version of node/npm: iobroker.hmip@1.24.3
npm ERR! notsup Required: {"node":">=18"}
npm ERR! notsup Actual:   {"npm":"8.19.3","node":"v16.19.0"}

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2024-11-09T18_08_07_112Z-debug-0.log
host.iobroker Cannot install iobroker.hmip@1.24.3: 1
lukas@iobroker:~ $ ^C
lukas@iobroker:~ $ lukas@iobroker:~ $ iob install hmip --debug
NPM version: 8.19.3
Installing iobroker.hmip@1.24.3... (System call)
npm ERR! code EBADENGINE
npm ERR! engine Unsupported engine
npm ERR! engine Not compatible with your version of node/npm: iobroker.hmip@1.24.3
npm ERR! notsup Not compatible with your version of node/npm: iobroker.hmip@1.24.3
npm ERR! notsup Required: {"node":">=18"}
npm ERR! notsup Actual:   {"npm":"8.19.3","node":"v16.19.0"}

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2024-11-09T18_08_07_112Z-debug-0.log
host.iobroker Cannot install iobroker.hmip@1.24.3: 1
lukas@iobroker:~ $ iob install hmip --debug
NPM version: 8.19.3
Installing iobroker.hmip@1.24.3... (System call)
npm ERR! code EBADENGINE
npm ERR! engine Unsupported engine
npm ERR! engine Not compatible with your version of node/npm: iobroker.hmip@1.24.3
npm ERR! notsup Not compatible with your version of node/npm: iobroker.hmip@1.24.3
host.iobroker Cannot install iobroker.hmip@1.24.3: 1_08_07_112Z-debug-0.log

Thomas Braun

@lukas8519 sagte in Homematic IP Cloud Adapter lässt sich nicht installieren:

"node":"v16.19.0"}

Zu alt...
Wir sind beim ioBroker bei nodejs20 als empfohlene Version, der Adapter verlangt mindestens 18.
Also updaten...

iob nodejs-update

Den Rest vom Fest dann auch aktualisieren.

lukas8519

@thomas-braun danke euch!

wie kann ich nochmal die installierte version checken ? ich glaube nämlich, dass es nicht funktioniert hat
...

Thomas Braun

@lukas8519

Installiert ist "node":"v16.19.0"

Schau per

iob diag

das Gesamtkonstrukt an.

Homoran

@lukas8519 sagte in Homematic IP Cloud Adapter lässt sich nicht installieren:

@thomas-braun danke euch!

wie kann ich nochmal die installierte version checken ? ich glaube nämlich, dass es nicht funktioniert hat
...

@homoran sagte in Homematic IP Cloud Adapter lässt sich nicht installieren:

bitte auch die Langfassung von iob diag

lukas8519

@thomas-braun sagte in Homematic IP Cloud Adapter lässt sich nicht installieren:

iob diag

*** iob diag is starting up, please wait ***
iob diag needs to be updated. Please execute 'iobroker fix' first.
lukas@iobroker:/opt/iobroker $

Homoran

@lukas8519 sagte in Homematic IP Cloud Adapter lässt sich nicht installieren:

Please execute 'iobroker fix' first.

oder hast du einen Raspi?

Thomas Braun

@lukas8519

Ist das ein Raspberry da? Dann vorübergehend die Raspbian-Beta-Version von hier verwenden:

https://forum.iobroker.net/topic/59549/iob-diag-skript

lukas8519

@homoran jaa

Homoran

@lukas8519 dann bitte

curl https://raw.githubusercontent.com/Grothesk242/ioBroker/refs/heads/Raspbian/diag.sh > iob_diag.sh
chmod 744 iob_diag.sh
./iob_diag.sh

ausführen

lukas8519

@homoran

Copy text starting here:

```bash
======================= SUMMARY =======================
                        v.2024-10-26 Raspbian


   Static hostname: iobroker
         Icon name: computer
  Operating System: Debian GNU/Linux 11 (bullseye)
            Kernel: Linux 5.15.61-v8+
      Architecture: arm64

Installation:           native
Kernel:                 aarch64
Userland:               64 bit
Timezone:               Europe/Berlin (CET, +0100)
User-ID:                1000
Display-Server:         false
Boot Target:            multi-user.target

Pending OS-Updates:     320
Pending iob updates:    40

Nodejs-Installation:
nodejs:                 N/A
/usr/bin/node           v16.19.0
/usr/bin/npm            8.19.3
/usr/bin/npx            8.19.3
/usr/bin/corepack       0.15.1

Recommended versions are nodejs 20.18.0 and npm 10.8.2
*** nodejs is NOT correctly installed ***
Wrong installation path detected. This needs to be fixed.

Please execute
iob nodejs-update
to fix these errors.

MEMORY:
               total        used        free      shared  buff/cache   available
Mem:            3.8G        510M        1.8G         35M        1.5G        3.3G
Swap:            99M        1.0M         98M
Total:          3.9G        511M        1.9G

Active iob-Instances:   1
Active repo(s): stable

ioBroker Core:          js-controller           4.0.24
                        admin                   7.1.5

ioBroker Status:        iobroker is not running on this host.


Objects type: jsonl
States  type: jsonl

Status admin and web instance:
  system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.web.0                    : web                   : iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

Objects:                25596
States:                 20358

Size of iob-Database:

21M     /opt/iobroker/iobroker-data/objects.jsonl
5.9M    /opt/iobroker/iobroker-data/states.jsonl


Unknown release codenamed 'bullseye'. Please check yourself if the Operating System is actively maintained.

=================== END OF SUMMARY ====================

=== Mark text until here for copying ===

Thomas Braun

@lukas8519 sagte in Homematic IP Cloud Adapter lässt sich nicht installieren:

Pending OS-Updates: 320
Pending iob updates: 40

Hatte ich mir schon gedacht, das da allgemeiner Update-Stau herrscht...

iob stop
sudo apt update
sudo apt full-upgrade
sudo reboot

Wenn die Kiste wieder greifbar ist:

iob update 
iob upgrade 
iob stop
iob upgrade self
iob update
iob upgrade
iob nodejs-update

lukas8519

@lukas8519
jetzt kommt das

lukas@iobroker:/opt/iobroker $ iob stop
lukas@iobroker:/opt/iobroker $ sudo apt update
Hit:1 http://deb.debian.org/debian bullseye InRelease
Hit:2 http://deb.debian.org/debian bullseye-updates InRelease
Hit:3 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:4 http://security.debian.org/debian-security bullseye-security InRelease
Get:5 https://repos.influxdata.com/debian stretch InRelease [12.9 kB]
Get:6 https://packages.grafana.com/oss/deb stable InRelease [7,660 B]
Hit:7 https://deb.nodesource.com/node_20.x nodistro InRelease
Err:5 https://repos.influxdata.com/debian stretch InRelease
  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
Err:6 https://packages.grafana.com/oss/deb stable InRelease
  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545
Reading package lists... Done
W: GPG error: https://repos.influxdata.com/debian stretch InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D8FF8E1F7DF8B07E
E: The repository 'https://repos.influxdata.com/debian stretch InRelease' is not signed.
N: Updating from such a repository can't be done securely, and is therefore disabled by default.
N: See apt-secure(8) manpage for repository creation and user configuration details.
W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://packages.grafana.com/oss/deb stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545
lukas@iobroker:/opt/iobroker $ sudo apt full-upgrade
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Calculating upgrade... Done
The following packages were automatically installed and are no longer required:
  libfuse2 libwpe-1.0-1 libwpebackend-fdo-1.0-1 raspinfo
Use 'sudo apt autoremove' to remove them.
The following NEW packages will be installed:
  kms++-utils raspi-utils
The following packages will be upgraded:
  adduser agnostics arandr avahi-daemon base-files bind9-host bind9-libs bluez
  bluez-firmware bsdextrautils bsdutils chromium-browser chromium-browser-l10n
  chromium-codecs-ffmpeg-extra cifs-utils cpio cups cups-browsed cups-client cups-common
  cups-core-drivers cups-daemon cups-filters cups-filters-core-drivers cups-ipp-utils
  cups-ppdc cups-server-common dbus dbus-user-session dbus-x11 debian-archive-keyring
  dhcpcd5 distro-info-data dns-root-data dpkg dpkg-dev e2fsprogs eject exfatprogs fdisk
  ffmpeg file firmware-atheros firmware-brcm80211 firmware-libertas firmware-misc-nonfree
  firmware-realtek ghostscript gir1.2-gdkpixbuf-2.0 gir1.2-gtk-3.0 gir1.2-rsvg-2.0 git
  git-man gldriver-test grafana grep gstreamer1.0-alsa gstreamer1.0-plugins-bad
  gstreamer1.0-plugins-base gstreamer1.0-plugins-good gstreamer1.0-x gtk-update-icon-cache
  gtk2-engines-pixbuf gui-pkinst isc-dhcp-client isc-dhcp-common less libaom0 libatspi2.0-0
  libavahi-client-dev libavahi-client3 libavahi-common-data libavahi-common-dev
  libavahi-common3 libavahi-compat-libdnssd-dev libavahi-compat-libdnssd1 libavahi-core7
  libavahi-glib1 libavcodec58 libavdevice58 libavfilter7 libavformat58 libavresample4
  libavutil56 libblas3 libblkid-dev libblkid1 libbluetooth3 libbluray2 libbsd0 libc-bin
  libc-dev-bin libc-devtools libc-l10n libc6 libc6-dbg libc6-dev libcamera-apps
  libcamera-tools libcamera0 libcom-err2 libcups2 libcupsfilters1 libcupsimage2
  libcurl3-gnutls libdav1d4 libdbus-1-3 libdbus-1-dev libde265-0 libdpkg-perl libegl-mesa0
  libexpat1 libexpat1-dev libext2fs2 libfdisk1 libflac8 libfontembed1 libgbm1
  libgdk-pixbuf-2.0-0 libgdk-pixbuf-2.0-dev libgdk-pixbuf2.0-bin libgdk-pixbuf2.0-common
  libgl1-mesa-dri libglapi-mesa libgles2-mesa libglib2.0-0 libglib2.0-bin libglib2.0-data
  libglib2.0-dev libglib2.0-dev-bin libglx-mesa0 libgnutls30 libgs9 libgs9-common
  libgssapi-krb5-2 libgstreamer-gl1.0-0 libgstreamer-plugins-bad1.0-0
  libgstreamer-plugins-base1.0-0 libgtk-3-0 libgtk-3-common libgtk2.0-0 libgtk2.0-bin
  libgtk2.0-common libimlib2 libjavascriptcoregtk-4.0-18 libjson-c5 libk5crypto3 libkms++0
  libkrb5-3 libkrb5support0 libksba8 liblapack3 libmagic-mgc libmagic1 libmount-dev
  libmount1 libmutter-7-0 libncurses6 libncursesw6 libndp0 libnftables1 libnghttp2-14
  libnss3 libntfs-3g883 libopenexr25 libpam-systemd libperl5.32 libpostproc55
  libprotobuf-lite23 libqt5concurrent5 libqt5core5a libqt5dbus5 libqt5gui5 libqt5network5
  libqt5printsupport5 libqt5sql5 libqt5sql5-sqlite libqt5test5 libqt5widgets5 libqt5xml5
  libraspberrypi-bin libraspberrypi-dev libraspberrypi-doc libraspberrypi0 librsvg2-2
  librsvg2-common librsvg2-dev libsepol1 libsepol1-dev libsmartcols1 libsmbclient
  libsqlite3-0 libss2 libssh-gcrypt-4 libssh2-1 libssl1.1 libswresample3 libswscale5
  libsynctex2 libsystemd0 libtasn1-6 libtiff5 libtinfo6 libudev-dev libudev1 libuuid1
  libuv1 libvlc-bin libvlc5 libvlccore9 libvncclient1 libvpx6 libwbclient0
  libwebkit2gtk-4.0-37 libwebp6 libwebpdemux2 libwebpmux3 libx11-6 libx11-data libx11-dev
  libx11-xcb1 libxml2 libxpm4 libzbar0 libzmq5 linux-libc-dev locales logrotate logsave
  lxplug-bluetooth lxplug-cputemp lxplug-ejecter lxplug-magnifier lxplug-menu lxplug-netman
  lxplug-network lxplug-ptbatt lxplug-updater lxplug-volumepulse lxtask mesa-va-drivers
  mesa-vdpau-drivers mount mutter mutter-common nano ncurses-base ncurses-bin ncurses-term
  net-tools nfs-common nftables nodejs ntfs-3g openssh-client openssh-server
  openssh-sftp-server openssl perl perl-base perl-modules-5.32 piclone pprompt
  python3-cryptography python3-flask python3-idna python3-kms++ python3-libcamera
  python3-picamera2 python3-pil python3-pkg-resources python3-renderpm python3-reportlab
  python3-reportlab-accel python3-sense-hat python3-setuptools python3-v4l2
  python3-werkzeug qt5-gtk-platformtheme raspberrypi-bootloader raspberrypi-kernel
  raspberrypi-sys-mods raspberrypi-ui-mods raspi-config raspinfo realvnc-vnc-server rfkill
  rp-bookshelf rp-prefapps rpi-eeprom rpi-imager samba-libs ssh sudo systemd systemd-sysv
  systemd-timesyncd tar thonny tzdata udev usb.ids util-linux uuid-dev vlc vlc-bin vlc-data
  vlc-l10n vlc-plugin-access-extra vlc-plugin-base vlc-plugin-notify vlc-plugin-qt
  vlc-plugin-samba vlc-plugin-skins2 vlc-plugin-video-output vlc-plugin-video-splitter
  vlc-plugin-visualization wpasupplicant xserver-common xserver-xorg-core xwayland
321 upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
Need to get 212 MB/700 MB of archives.
After this operation, 539 MB of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 http://archive.raspberrypi.org/debian bullseye/main arm64 kms++-utils arm64 0~git20221104~171243+adc05b6-1 [81.4 kB]
Get:2 http://archive.raspberrypi.org/debian bullseye/main arm64 raspinfo all 20230123-1 [2,564 B]
Get:3 http://archive.raspberrypi.org/debian bullseye/main arm64 raspi-utils arm64 20230123-1 [41.8 kB]
Err:4 https://packages.grafana.com/oss/deb stable/main arm64 grafana arm64 10.1.0
  404  Not Found [IP: 2a04:4e42:9::729 443]
Fetched 126 kB in 0s (422 kB/s)
E: Failed to fetch https://packages.grafana.com/oss/deb/pool/main/g/grafana/grafana_10.1.0_arm64.deb  404  Not Found [IP: 2a04:4e42:9::729 443]
E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?

Homoran

@lukas8519 sagte in Homematic IP Cloud Adapter lässt sich nicht installieren:

https://repos.influxdata.com/debian stretch InRelease

das ist ja Steinzeit

wie alt ist die Installation?

Thomas Braun

Halte deine Kiste immer auf einem aktuellen Stand...
Die hat noch nie ein Update gesehen. Davon ab betreibt man auch keine graphische Oberfläche auf einem Server.
Was willste mit vlc auf dem Ding?

Richte grafana und influx neu ein:

https://forum.iobroker.net/topic/59231/phantastische-repositories-und-wo-sie-zu-finden-sind

lukas8519

@thomas-braun
ja die ist schon älter und ich habe tatsächlich nicht viel daran gemacht.
Und Grafana benutze ich auch schon lange nicht mehr ...

was sind denn nun die extenziell wichtigen schritte?

sorry für meine Unwissenheit

Thomas Braun

@lukas8519 sagte in Homematic IP Cloud Adapter lässt sich nicht installieren:

was sind denn nun die extenziell wichtigen schritte?

Die habe ich dir schon geschrieben.

Community Forum

NEWS

Homematic IP Cloud Adapter lässt sich nicht installieren

Support us

488

32.5k

81.9k

1.3m