Neuer Blogbeitrag: Monatsrückblick - Dezember 2025 🎄

[BananaJoe]

@svaggy zeig mal ein Beispielskript als Screenshot. Vielleicht liegt es am Aufbau der Skripte.
und ein

iob diag

in der Langfassung

[Svaggy]

Gerade mit einer eigenen Skript Instanz getestet:

[Svaggy]

Wie/Wo kann ich ein iob diag machen?

[Thomas Braun]

@svaggy

Im Terminal (aus einer Session innerhalb des LXCs)

iob diag

eingeben.

[Svaggy]

Danke hier der Output:

========== Start marking the full check here ===========

Script v.2024-10-19

*** BASE SYSTEM ***
 Static hostname: iobroker
       Icon name: computer-container
         Chassis: container ☐
  Virtualization: lxc
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.8.12-2-pve
    Architecture: x86-64
OS is similar to: 

model name      : Intel(R) Core(TM) i5-7260U CPU @ 2.20GHz
Docker          : false
Virtualization  : lxc
Kernel          : x86_64
Userland        : 64 bit

Systemuptime and Load:
 12:49:05 up 5 min,  2 users,  load average: 0.23, 0.35, 0.32
CPU threads: 4


*** LIFE CYCLE STATUS ***
Unknown release codenamed ''. Please check yourself if the Operating System is actively maintained.

*** TIME AND TIMEZONES ***
               Local time: Fri 2024-11-08 12:49:05 CET
           Universal time: Fri 2024-11-08 11:49:05 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: inactive
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
root
HOME=/root
GROUPS=root

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev

A default user should be created! This user will be enabled to temporarily switch to root via 'sudo'!
A root login is not required in most Linux Distributions.
Run 'iobroker fix' or use the system tools to create a user.
*** DISPLAY-SERVER SETUP ***
Display-Server: false
Desktop: 
Terminal: 

System is booting into 'graphical.target'. Usually a server is running in 'multi-user.target'. Please set BootTarget to 'multi-user.target' or run 'iobroker fix'

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            4.3G        1.7G        2.2G        110K        443M        2.6G
Swap:           536M          0B        536M
Total:          4.8G        1.7G        2.7G

Active iob-Instances:   0

         4096 M total memory
         1619 M used memory
         1631 M active memory
          306 M inactive memory
         2053 M free memory
            0 M buffer memory
          423 M swap cache
          512 M total swap
            0 M used swap
          512 M free swap

*** top - Table Of Processes  ***
top - 12:49:05 up 5 min,  2 users,  load average: 0.23, 0.35, 0.32
Tasks:  49 total,   1 running,  48 sleeping,   0 stopped,   0 zombie
%Cpu(s):  0.0 us, 50.0 sy,  0.0 ni, 50.0 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st 
MiB Mem :   4096.0 total,   2052.4 free,   1620.7 used,    423.0 buff/cache     
MiB Swap:    512.0 total,    512.0 free,      0.0 used.   2475.3 avail Mem 

*** FAILED SERVICES ***

  UNIT                    LOAD   ACTIVE SUB    DESCRIPTION
* run-rpc_pipefs.mount    loaded failed failed RPC Pipe File System
* sys-kernel-config.mount loaded failed failed Kernel Configuration File System

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.
2 loaded units listed.


*** DMESG CRITICAL ERRORS ***
dmesg: read kernel buffer failed: Operation not permitted
No critical errors detected

*** FILESYSTEM ***
Filesystem                       Type      Size  Used Avail Use% Mounted on
/dev/mapper/pve-vm--100--disk--0 ext4       63G  5.1G   55G   9% /
none                             tmpfs     492K  4.0K  488K   1% /dev
udev                             devtmpfs  3.8G     0  3.8G   0% /dev/tty
tmpfs                            tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs                            tmpfs     1.6G  104K  1.6G   1% /run
tmpfs                            tmpfs     5.0M     0  5.0M   0% /run/lock

Messages concerning ext4 filesystem in dmesg:
dmesg: read kernel buffer failed: Operation not permitted

Show mounted filesystems:
TARGET SOURCE                           FSTYPE OPTIONS
/      /dev/mapper/pve-vm--100--disk--0 ext4   rw,relatime,stripe=16

Files in neuralgic directories:

/var:
485M    /var/
251M    /var/cache
247M    /var/cache/apt
171M    /var/cache/apt/archives
146M    /var/lib

Archived and active journals take up 87.3M in the file system.

/opt/iobroker/backups:
62M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
1.1G    /opt/iobroker/iobroker-data/
945M    /opt/iobroker/iobroker-data/files
617M    /opt/iobroker/iobroker-data/files/javascript.admin
560M    /opt/iobroker/iobroker-data/files/javascript.admin/static
558M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js

The five largest files in iobroker-data are:
38M     /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map
24M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map
24M     /opt/iobroker/iobroker-data/files/vis-2/static/js/main.f305bc29.js.map
24M     /opt/iobroker/iobroker-data/files/vis-2/static/js/main.8e80ccb0.js.map
24M     /opt/iobroker/iobroker-data/files/vis-2/customWidgets.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

No Devices found 'by-id'

*** NodeJS-Installation ***

/usr/bin/nodejs         v20.18.0
/usr/bin/node           v20.18.0
/usr/bin/npm            10.8.2
/usr/bin/npx            10.8.2
/usr/bin/corepack       0.29.3

nodejs:
  Installed: 20.18.0-1nodesource1
  Candidate: 20.18.0-1nodesource1
  Version table:
 *** 20.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
        100 /var/lib/dpkg/status
     20.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.12.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.12.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.11.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.8.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.6.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.3.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     18.19.0+dfsg-6~deb12u2 500
        500 http://deb.debian.org/debian bookworm/main amd64 Packages
     18.19.0+dfsg-6~deb12u1 500
        500 http://security.debian.org bookworm-security/main amd64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status

***For security reasons ioBroker should not be run or administrated as root.***
By default only a user that is member of iobroker group can execute ioBroker commands.
Please read the Documentation on how to set up such a user, if not done yet.
Only in very special cases you can run iobroker commands by adding the --allow-root option at the end of the command line.
Please note that this option may be disabled in the future, so please change your setup accordingly now.

Hosts:

***For security reasons ioBroker should not be run or administrated as root.***
By default only a user that is member of iobroker group can execute ioBroker commands.
Please read the Documentation on how to set up such a user, if not done yet.
Only in very special cases you can run iobroker commands by adding the --allow-root option at the end of the command line.
Please note that this option may be disabled in the future, so please change your setup accordingly now.

Core adapters versions
js-controller: 
***For security reasons ioBroker should not be run or administrated as root.***
By default only a user that is member of iobroker group can execute ioBroker commands.
Please read the Documentation on how to set up such a user, if not done yet.
Only in very special cases you can run iobroker commands by adding the --allow-root option at the end of the command line.
Please note that this option may be disabled in the future, so please change your setup accordingly now.
admin: 
***For security reasons ioBroker should not be run or administrated as root.***
By default only a user that is member of iobroker group can execute ioBroker commands.
Please read the Documentation on how to set up such a user, if not done yet.
Only in very special cases you can run iobroker commands by adding the --allow-root option at the end of the command line.
Please note that this option may be disabled in the future, so please change your setup accordingly now.
javascript: 
***For security reasons ioBroker should not be run or administrated as root.***
By default only a user that is member of iobroker group can execute ioBroker commands.
Please read the Documentation on how to set up such a user, if not done yet.
Only in very special cases you can run iobroker commands by adding the --allow-root option at the end of the command line.
Please note that this option may be disabled in the future, so please change your setup accordingly now.

nodejs modules from github:     0

Adapter State

***For security reasons ioBroker should not be run or administrated as root.***
By default only a user that is member of iobroker group can execute ioBroker commands.
Please read the Documentation on how to set up such a user, if not done yet.
Only in very special cases you can run iobroker commands by adding the --allow-root option at the end of the command line.
Please note that this option may be disabled in the future, so please change your setup accordingly now.

Enabled adapters with bindings

ioBroker-Repositories

***For security reasons ioBroker should not be run or administrated as root.***
By default only a user that is member of iobroker group can execute ioBroker commands.
Please read the Documentation on how to set up such a user, if not done yet.
Only in very special cases you can run iobroker commands by adding the --allow-root option at the end of the command line.
Please note that this option may be disabled in the future, so please change your setup accordingly now.

Installed ioBroker-Instances

***For security reasons ioBroker should not be run or administrated as root.***
By default only a user that is member of iobroker group can execute ioBroker commands.
Please read the Documentation on how to set up such a user, if not done yet.
Only in very special cases you can run iobroker commands by adding the --allow-root option at the end of the command line.
Please note that this option may be disabled in the future, so please change your setup accordingly now.

Objects and States
Please stand by - This may take a while
Objects:        6
States:         6

*** OS-Repositories and Updates ***
Hit:1 http://security.debian.org bookworm-security InRelease
Hit:2 http://deb.debian.org/debian bookworm InRelease
Hit:3 http://deb.debian.org/debian bookworm-updates InRelease
Hit:4 https://deb.nodesource.com/node_20.x nodistro InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name    
tcp        0      0 127.0.0.1:25            0.0.0.0:*               LISTEN      0          4982207    296/master          
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1000       4982321    132/iobroker.js-con 
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1000       4982168    132/iobroker.js-con 
tcp        0      0 0.0.0.0:1882            0.0.0.0:*               LISTEN      1000       4984251    453/io.shelly.1     
tcp        0      0 192.168.2.250:9093      0.0.0.0:*               LISTEN      1000       4985750    558/io.fakeroku.0   
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          4979695    1/init              
tcp6       0      0 :::8082                 :::*                    LISTEN      1000       4988116    633/io.web.0        
tcp6       0      0 :::8081                 :::*                    LISTEN      1000       4983861    307/io.admin.0      
tcp6       0      0 ::1:25                  :::*                    LISTEN      0          4982208    296/master          
tcp6       0      0 :::111                  :::*                    LISTEN      0          4979697    1/init              
tcp6       0      0 :::22                   :::*                    LISTEN      0          4980604    1/init              
tcp6       0      0 :::61991                :::*                    LISTEN      1000       4987065    543/io.harmony.0    
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           1000       4989203    663/io.homekit-cont 
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1000       4985129    408/io.shelly.0     
udp        0      0 0.0.0.0:1900            0.0.0.0:*                           1000       4987930    588/io.deconz.0     
udp        0      0 0.0.0.0:1900            0.0.0.0:*                           1000       4985751    558/io.fakeroku.0   
udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          4979696    1/init              
udp        0      0 0.0.0.0:61991           0.0.0.0:*                           1000       4987066    543/io.harmony.0    
udp6       0      0 :::1900                 :::*                                1000       4987932    588/io.deconz.0     
udp6       0      0 :::1900                 :::*                                1000       4987931    588/io.deconz.0     
udp6       0      0 :::111                  :::*                                0          4979698    1/init              

*** Log File - Last 25 Lines ***

2024-11-08 12:45:02.648  - info: homekit-controller.0 (663) IP-66:7A:54:63:50:00 (eufy HomeBase2-0F53) found without pairing data but available for pairing: Create basic objects
2024-11-08 12:45:03.365  - info: alexa2.0 (468) Initialization Done ...
2024-11-08 12:45:03.553  - info: host.iobroker instance system.adapter.maxcul.0 in version "1.3.1" started with pid 693
2024-11-08 12:45:04.203  - info: maxcul.0 (693) starting. Version 1.3.1 in /opt/iobroker/node_modules/iobroker.maxcul, node: v20.18.0, js-controller: 6.0.11
2024-11-08 12:45:04.300  - info: maxcul.0 (693) using serial device /dev/ttyACM0@38400
2024-11-08 12:45:04.306  - info: maxcul.0 (693) serialPort /dev/ttyACM0 is open!
2024-11-08 12:45:07.344  - info: host.iobroker instance system.adapter.iot.0 in version "3.3.0" started with pid 708
2024-11-08 12:45:08.154  - info: iot.0 (708) starting. Version 3.3.0 in /opt/iobroker/node_modules/iobroker.iot, node: v20.18.0, js-controller: 6.0.11
2024-11-08 12:45:08.187  - info: iot.0 (708) Connecting with a18wym7vjdl22g.iot.eu-west-1.amazonaws.com
2024-11-08 12:45:08.600  - info: iot.0 (708) Connection changed: connect "xxxx_gmail_com"
2024-11-08 12:45:12.841  - info: host.iobroker stopInstance system.adapter.nuki-extended.0 (force=false, process=true)
2024-11-08 12:45:12.843  - info: nuki-extended.0 (483) Got terminate signal TERMINATE_YOURSELF
2024-11-08 12:45:12.843  - info: nuki-extended.0 (483) Adapter stopped und unloaded.
2024-11-08 12:45:12.844  - info: nuki-extended.0 (483) terminating
2024-11-08 12:45:12.844  - info: nuki-extended.0 (483) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2024-11-08 12:45:12.892  - info: host.iobroker stopInstance system.adapter.nuki-extended.0 send kill signal
2024-11-08 12:45:13.345  - info: nuki-extended.0 (483) terminating
2024-11-08 12:45:13.369  - info: host.iobroker instance system.adapter.nuki-extended.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2024-11-08 12:45:16.626  - info: host.iobroker instance system.adapter.nuki-extended.0 in version "2.7.0" started with pid 723
2024-11-08 12:45:17.479  - info: nuki-extended.0 (723) starting. Version 2.7.0 in /opt/iobroker/node_modules/iobroker.nuki-extended, node: v20.18.0, js-controller: 6.0.11
2024-11-08 12:45:17.548  - warn: nuki-extended.0 (723) Due to performance reasons, the refresh rate can not be set to less than 5 seconds. Using 5 seconds now for Nuki Web API.
2024-11-08 12:45:17.549  - info: nuki-extended.0 (723) Polling Nuki Web API with a frequency of 5s.
2024-11-08 12:45:17.554  - warn: nuki-extended.0 (723) Name, IP or API token missing for bridge ! Please go to settings and fill in IP and the API token first!
2024-11-08 12:45:17.554  - info: nuki-extended.0 (723) No bridges are sufficiently defined! Name, IP or token missing or all bridges deactivated!
2024-11-08 12:45:34.308  - info: maxcul.0 (693) Timeout on CUL connect, cul is available but not responding

============ Mark until here for C&P =============

iob diag has finished.

Press any key for a summary

======================= SUMMARY =======================
v.2024-10-19

Static hostname: iobroker
Icon name: computer-container
Chassis: container ☐
Virtualization: lxc
Operating System: Debian GNU/Linux 12 (bookworm)
Kernel: Linux 6.8.12-2-pve
Architecture: x86-64

Installation: lxc
Kernel: x86_64
Userland: 64 bit
Timezone: Europe/Berlin (CET, +0100)
User-ID: 0
Display-Server: false
Boot Target: graphical.target

Pending OS-Updates: 0
Pending iob updates: 0

Nodejs-Installation:
/usr/bin/nodejs v20.18.0
/usr/bin/node v20.18.0
/usr/bin/npm 10.8.2
/usr/bin/npx 10.8.2
/usr/bin/corepack 0.29.3

Recommended versions are nodejs
For security reasons ioBroker should not be run or administrated as root.
By default only a user that is member of iobroker group can execute ioBroker commands.
Please read the Documentation on how to set up such a user, if not done yet.
Only in very special cases you can run iobroker commands by adding the --allow-root option at the end of the command line.
Please note that this option may be disabled in the future, so please change your setup accordingly now. and npm
For security reasons ioBroker should not be run or administrated as root.
By default only a user that is member of iobroker group can execute ioBroker commands.
Please read the Documentation on how to set up such a user, if not done yet.
Only in very special cases you can run iobroker commands by adding the --allow-root option at the end of the command line.
Please note that this option may be disabled in the future, so please change your setup accordingly now.
nodeJS installation is correct

MEMORY:
total used free shared buff/cache available
Mem: 4.3G 1.7G 2.2G 110K 443M 2.6G
Swap: 536M 0B 536M
Total: 4.8G 1.7G 2.7G

Active iob-Instances: 0
Please note that this option may be disabled in the future, so please change your setup accordingly now.

ioBroker Core: js-controller
For security reasons ioBroker should not be run or administrated as root.
By default only a user that is member of iobroker group can execute ioBroker commands.
Please read the Documentation on how to set up such a user, if not done yet.
Only in very special cases you can run iobroker commands by adding the --allow-root option at the end of the command line.
Please note that this option may be disabled in the future, so please change your setup accordingly now.
admin
For security reasons ioBroker should not be run or administrated as root.
By default only a user that is member of iobroker group can execute ioBroker commands.
Please read the Documentation on how to set up such a user, if not done yet.
Only in very special cases you can run iobroker commands by adding the --allow-root option at the end of the command line.
Please note that this option may be disabled in the future, so please change your setup accordingly now.

ioBroker Status:
For security reasons ioBroker should not be run or administrated as root.
By default only a user that is member of iobroker group can execute ioBroker commands.
Please read the Documentation on how to set up such a user, if not done yet.
Only in very special cases you can run iobroker commands by adding the --allow-root option at the end of the command line.
Please note that this option may be disabled in the future, so please change your setup accordingly now.

Status admin and web instance:
For security reasons ioBroker should not be run or administrated as root.

Objects: 6
States: 6

Size of iob-Database:

21M /opt/iobroker/iobroker-data/objects.jsonl
2.6M /opt/iobroker/iobroker-data/states.jsonl

Unknown release codenamed ''. Please check yourself if the Operating System is actively maintained.

=================== END OF SUMMARY ====================

=== Mark text until here for copying ===

[paul53]

@svaggy sagte:

Objects and States
Please stand by - This may take a while
Objects:        6
States:         6

Das kann nicht sein und passt nicht zu:

Size of iob-Database:
21M /opt/iobroker/iobroker-data/objects.jsonl
2.6M /opt/iobroker/iobroker-data/states.jsonl

[Thomas Braun]

@svaggy

Dann den

iob fix

und die angemeckerten Punkte wie 'root' und graphical.target
korrigieren.

[Svaggy]

Danke, erledigt. Funktioniert leider immer noch nicht.

Hier der erneute iob diag output:

========== Start marking the full check here ===========

Script v.2024-10-19

*** BASE SYSTEM ***
 Static hostname: iobroker
       Icon name: computer-container
         Chassis: container ☐
  Virtualization: lxc
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.8.12-2-pve
    Architecture: x86-64
OS is similar to: 

model name      : Intel(R) Core(TM) i5-7260U CPU @ 2.20GHz
Docker          : false
Virtualization  : lxc
Kernel          : x86_64
Userland        : 64 bit

Systemuptime and Load:
 13:14:43 up 4 min,  2 users,  load average: 0.46, 0.80, 0.49
CPU threads: 4


*** LIFE CYCLE STATUS ***
Unknown release codenamed ''. Please check yourself if the Operating System is actively maintained.

*** TIME AND TIMEZONES ***
               Local time: Fri 2024-11-08 13:14:43 CET
           Universal time: Fri 2024-11-08 12:14:43 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: inactive
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
svaggy
HOME=/home/svaggy
GROUPS=svaggy adm dialout sudo audio video plugdev users iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev

*** DISPLAY-SERVER SETUP ***
Display-Server: false
Desktop: 
Terminal: 

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            4.3G        1.7G        2.2G        114K        468M        2.6G
Swap:           536M          0B        536M
Total:          4.8G        1.7G        2.7G

Active iob-Instances:   25

         4096 M total memory
         1599 M used memory
         1576 M active memory
          321 M inactive memory
         2049 M free memory
            0 M buffer memory
          446 M swap cache
          512 M total swap
            0 M used swap
          512 M free swap

*** top - Table Of Processes  ***
top - 13:14:44 up 4 min,  2 users,  load average: 0.46, 0.80, 0.49
Tasks:  50 total,   1 running,  49 sleeping,   0 stopped,   0 zombie
%Cpu(s):  0.0 us,  0.0 sy,  0.0 ni,100.0 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st 
MiB Mem :   4096.0 total,   2048.3 free,   1601.2 used,    446.7 buff/cache     
MiB Swap:    512.0 total,    512.0 free,      0.0 used.   2494.8 avail Mem 

*** FAILED SERVICES ***

  UNIT                    LOAD   ACTIVE SUB    DESCRIPTION
* run-rpc_pipefs.mount    loaded failed failed RPC Pipe File System
* sys-kernel-config.mount loaded failed failed Kernel Configuration File System

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.
2 loaded units listed.


*** DMESG CRITICAL ERRORS ***
dmesg: read kernel buffer failed: Operation not permitted
No critical errors detected

*** FILESYSTEM ***
Filesystem                       Type      Size  Used Avail Use% Mounted on
/dev/mapper/pve-vm--100--disk--0 ext4       63G  5.1G   55G   9% /
none                             tmpfs     492K  4.0K  488K   1% /dev
udev                             devtmpfs  3.8G     0  3.8G   0% /dev/tty
tmpfs                            tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs                            tmpfs     1.6G  108K  1.6G   1% /run
tmpfs                            tmpfs     5.0M     0  5.0M   0% /run/lock

Messages concerning ext4 filesystem in dmesg:
dmesg: read kernel buffer failed: Operation not permitted

Show mounted filesystems:
TARGET SOURCE                           FSTYPE OPTIONS
/      /dev/mapper/pve-vm--100--disk--0 ext4   rw,relatime,stripe=16

Files in neuralgic directories:

/var:
493M    /var/
251M    /var/cache
247M    /var/cache/apt
171M    /var/cache/apt/archives
146M    /var/lib

Archived and active journals take up 95.3M in the file system.

/opt/iobroker/backups:
62M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
1.1G    /opt/iobroker/iobroker-data/
945M    /opt/iobroker/iobroker-data/files
617M    /opt/iobroker/iobroker-data/files/javascript.admin
560M    /opt/iobroker/iobroker-data/files/javascript.admin/static
558M    /opt/iobroker/iobroker-data/files/javascript.admin/static/js

The five largest files in iobroker-data are:
38M     /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map
24M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map
24M     /opt/iobroker/iobroker-data/files/vis-2/static/js/main.f305bc29.js.map
24M     /opt/iobroker/iobroker-data/files/vis-2/static/js/main.8e80ccb0.js.map
24M     /opt/iobroker/iobroker-data/files/vis-2/customWidgets.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

No Devices found 'by-id'

*** NodeJS-Installation ***

/usr/bin/nodejs         v20.18.0
/usr/bin/node           v20.18.0
/usr/bin/npm            10.8.2
/usr/bin/npx            10.8.2
/usr/bin/corepack       0.29.3

nodejs:
  Installed: 20.18.0-1nodesource1
  Candidate: 20.18.0-1nodesource1
  Version table:
 *** 20.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
        100 /var/lib/dpkg/status
     20.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.12.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.12.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.11.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.8.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.6.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.3.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     20.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main amd64 Packages
     18.19.0+dfsg-6~deb12u2 500
        500 http://deb.debian.org/debian bookworm/main amd64 Packages
     18.19.0+dfsg-6~deb12u1 500
        500 http://security.debian.org bookworm-security/main amd64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
iobroker            iobroker (version: 6.0.11, hostname: iobroker      , alive, uptime: 196)

Core adapters versions
js-controller:  6.0.11
admin:          7.1.5
javascript:     8.8.3

nodejs modules from github:     0

Adapter State
+ system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : iobroker                                 -  enabled
+ system.adapter.backitup.0               : backitup              : iobroker                                 -  enabled
+ system.adapter.cloud.0                  : cloud                 : iobroker                                 -  enabled
+ system.adapter.deconz.0                 : deconz                : iobroker                                 -  enabled, port: 8080
+ system.adapter.discovery.0              : discovery             : iobroker                                 -  enabled
+ system.adapter.eusec.0                  : eusec                 : iobroker                                 -  enabled
+ system.adapter.fakeroku.0               : fakeroku              : iobroker                                 -  enabled
  system.adapter.feiertage.0              : feiertage             : iobroker                                 -  enabled
+ system.adapter.fhem.0                   : fhem                  : iobroker                                 -  enabled, port: 7072
+ system.adapter.harmony.0                : harmony               : iobroker                                 -  enabled
+ system.adapter.homekit-controller.0     : homekit-controller    : iobroker                                 -  enabled
+ system.adapter.hue.0                    : hue                   : iobroker                                 -  enabled, port: 443
+ system.adapter.iot.0                    : iot                   : iobroker                                 -  enabled
+ system.adapter.javascript.0             : javascript            : iobroker                                 -  enabled
+ system.adapter.javascript.1             : javascript            : iobroker                                 -  enabled
+ system.adapter.lgtv.0                   : lgtv                  : iobroker                                 -  enabled
+ system.adapter.maxcul.0                 : maxcul                : iobroker                                 -  enabled
+ system.adapter.nuki-extended.0          : nuki-extended         : iobroker                                 -  enabled
+ system.adapter.nuki.0                   : nuki                  : iobroker                                 -  enabled
+ system.adapter.pushover.0               : pushover              : iobroker                                 -  enabled
+ system.adapter.shelly.0                 : shelly                : iobroker                                 -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.shelly.1                 : shelly                : iobroker                                 -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.vis-2.0                  : vis-2                 : iobroker                                 -  enabled
  system.adapter.vis-colorpicker.0        : vis-colorpicker       : iobroker                                 -  enabled
  system.adapter.vis.0                    : vis                   : iobroker                                 -  enabled
  system.adapter.weatherunderground.0     : weatherunderground    : iobroker                                 - disabled
+ system.adapter.web.0                    : web                   : iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.deconz.0                 : deconz                : iobroker                                 -  enabled, port: 8080
+ system.adapter.fhem.0                   : fhem                  : iobroker                                 -  enabled, port: 7072
+ system.adapter.hue.0                    : hue                   : iobroker                                 -  enabled, port: 443
+ system.adapter.shelly.0                 : shelly                : iobroker                                 -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.shelly.1                 : shelly                : iobroker                                 -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): stable
Upgrade policy: none

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 7.1.5    , installed 7.1.5
Adapter    "alexa2"       : 3.26.5   , installed 3.26.6
Adapter    "backitup"     : 3.0.25   , installed 3.0.25
Adapter    "cloud"        : 5.0.1    , installed 5.0.1
Adapter    "deconz"       : 1.4.1    , installed 1.4.1
Adapter    "discovery"    : 5.0.0    , installed 5.0.0
Adapter    "eusec"        : 1.3.3    , installed 1.3.3
Adapter    "fakeroku"     : 0.3.0    , installed 0.3.0
Adapter    "feiertage"    : 1.2.0    , installed 1.2.0
Adapter    "fhem"         : 3.0.0    , installed 3.0.0
Adapter    "harmony"      : 1.5.0    , installed 1.5.0
Adapter    "homekit-controller": 0.5.10, installed 0.5.10
Adapter    "hue"          : 3.12.0   , installed 3.12.0
Adapter    "iot"          : 3.3.0    , installed 3.3.0
Adapter    "javascript"   : 8.8.3    , installed 8.8.3
Controller "js-controller": 6.0.11   , installed 6.0.11
Adapter    "lgtv"         : 2.2.0    , installed 2.2.0
Adapter    "maxcul"       : 1.3.1    , installed 1.3.1
Adapter    "nuki"         : 2.0.0    , installed 2.0.0
Adapter    "nuki-extended": 2.7.0    , installed 2.7.0
Adapter    "pushover"     : 4.1.0    , installed 4.1.0
Adapter    "shelly"       : 8.2.1    , installed 8.2.1
Adapter    "simple-api"   : 2.8.0    , installed 2.8.0
Adapter    "socketio"     : 6.7.1    , installed 6.7.1
Adapter    "vis"          : 1.5.6    , installed 1.5.6
Adapter    "vis-2"        : 2.9.64   , installed 2.9.64
Adapter    "vis-colorpicker": 2.0.3  , installed 2.0.3
Adapter    "weatherunderground": 3.7.0, installed 3.7.0
Adapter    "web"          : 6.2.5    , installed 6.2.5
Adapter    "ws"           : 2.6.2    , installed 2.6.2

Objects and States
Please stand by - This may take a while
Objects:        10290
States:         6704

*** OS-Repositories and Updates ***
Hit:1 http://security.debian.org bookworm-security InRelease
Hit:2 http://deb.debian.org/debian bookworm InRelease
Hit:3 http://deb.debian.org/debian bookworm-updates InRelease
Hit:4 https://deb.nodesource.com/node_20.x nodistro InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name    
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1000       5074162    1448/iobroker.js-co 
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1000       5074157    1448/iobroker.js-co 
tcp        0      0 127.0.0.1:25            0.0.0.0:*               LISTEN      0          5066049    296/master          
tcp        0      0 192.168.2.250:9093      0.0.0.0:*               LISTEN      1000       5077678    1733/io.fakeroku.0  
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          5065778    1/init              
tcp        0      0 0.0.0.0:1882            0.0.0.0:*               LISTEN      1000       5074725    1628/io.shelly.1    
tcp6       0      0 ::1:25                  :::*                    LISTEN      0          5066050    296/master          
tcp6       0      0 :::8082                 :::*                    LISTEN      1000       5078488    1808/io.web.0       
tcp6       0      0 :::8081                 :::*                    LISTEN      1000       5075216    1466/io.admin.0     
tcp6       0      0 :::22                   :::*                    LISTEN      0          5065378    1/init              
tcp6       0      0 :::111                  :::*                    LISTEN      0          5065780    1/init              
tcp6       0      0 :::61991                :::*                    LISTEN      1000       5077623    1718/io.harmony.0   
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           1000       5079643    1838/io.homekit-con 
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1000       5074578    1583/io.shelly.0    
udp        0      0 0.0.0.0:1900            0.0.0.0:*                           1000       5078315    1763/io.deconz.0    
udp        0      0 0.0.0.0:1900            0.0.0.0:*                           1000       5077679    1733/io.fakeroku.0  
udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          5065779    1/init              
udp        0      0 0.0.0.0:61991           0.0.0.0:*                           1000       5077624    1718/io.harmony.0   
udp6       0      0 :::1900                 :::*                                1000       5078317    1763/io.deconz.0    
udp6       0      0 :::1900                 :::*                                1000       5078316    1763/io.deconz.0    
udp6       0      0 :::111                  :::*                                0          5065781    1/init              

*** Log File - Last 25 Lines ***

2024-11-08 13:12:58.868  - info: vis.0 (1853) starting. Version 1.5.6 in /opt/iobroker/node_modules/iobroker.vis, node: v20.18.0, js-controller: 6.0.11
2024-11-08 13:12:59.476  - info: vis.0 (1853) Terminated (NO_ERROR): Without reason
2024-11-08 13:13:00.002  - info: host.iobroker instance system.adapter.vis.0 terminated while should be started once
2024-11-08 13:13:01.400  - warn: homekit-controller.0 (1838) IP-58:03:3A:5D:47:0C Could not initialize device: connect EHOSTUNREACH 192.168.2.88:60274 Error: connect EHOSTUNREACH 192.168.2.88:60274
    at TCPConnectWrap.afterConnect [as oncomplete] (node:net:1607:16)
2024-11-08 13:13:02.491  - info: host.iobroker instance system.adapter.maxcul.0 in version "1.3.1" started with pid 1868
2024-11-08 13:13:03.119  - info: maxcul.0 (1868) starting. Version 1.3.1 in /opt/iobroker/node_modules/iobroker.maxcul, node: v20.18.0, js-controller: 6.0.11
2024-11-08 13:13:03.215  - info: maxcul.0 (1868) using serial device /dev/ttyACM0@38400
2024-11-08 13:13:03.221  - info: maxcul.0 (1868) serialPort /dev/ttyACM0 is open!
2024-11-08 13:13:03.224  - info: maxcul.0 (1868) deviceRequestTimeInformation: "076f7d"
2024-11-08 13:13:03.228  - info: maxcul.0 (1868) deviceRequestTimeInformation: "076f7d"
2024-11-08 13:13:03.229  - info: maxcul.0 (1868) deviceRequestTimeInformation: "076f7d"
2024-11-08 13:13:04.622  - info: homekit-controller.0 (1838) IP-66:7A:54:63:50:00 (eufy HomeBase2-0F53) found without pairing data but available for pairing: Create basic objects
2024-11-08 13:13:04.792  - warn: homekit-controller.0 (1838) IP-D2:B6:84:EF:1D:70 Could not initialize device: connect EHOSTUNREACH 192.168.2.65:61818 Error: connect EHOSTUNREACH 192.168.2.65:61818
    at TCPConnectWrap.afterConnect [as oncomplete] (node:net:1607:16)
2024-11-08 13:13:05.224  - info: maxcul.0 (1868) CUL FW Version: V 1.66_nocredits CUL868
2024-11-08 13:13:06.255  - info: host.iobroker instance system.adapter.iot.0 in version "3.3.0" started with pid 1883
2024-11-08 13:13:07.061  - info: iot.0 (1883) starting. Version 3.3.0 in /opt/iobroker/node_modules/iobroker.iot, node: v20.18.0, js-controller: 6.0.11
2024-11-08 13:13:07.099  - info: iot.0 (1883) Connecting with a18wym7vjdl22g.iot.eu-west-1.amazonaws.com
2024-11-08 13:13:07.679  - info: iot.0 (1883) Connection changed: connect "xxxxx_gmail_com"
2024-11-08 13:13:07.784  - info: alexa2.0 (1643) Initialization Done ...
2024-11-08 13:13:45.751  - info: maxcul.0 (1868) deviceRequestTimeInformation: "076f5e"
2024-11-08 13:13:50.750  - info: maxcul.0 (1868) deviceRequestTimeInformation: "076f5e"
2024-11-08 13:13:55.751  - info: maxcul.0 (1868) deviceRequestTimeInformation: "076f5e"
2024-11-08 13:15:00.209  - error: host.iobroker cannot call visUtils: Not exists

============ Mark until here for C&P =============

iob diag has finished.

Press any key for a summary

====================== SUMMARY =======================
v.2024-10-19

Static hostname: iobroker
Icon name: computer-container
Chassis: container ☐
Virtualization: lxc
Operating System: Debian GNU/Linux 12 (bookworm)
Kernel: Linux 6.8.12-2-pve
Architecture: x86-64

Installation: lxc
Kernel: x86_64
Userland: 64 bit
Timezone: Europe/Berlin (CET, +0100)
User-ID: 1001
Display-Server: false
Boot Target: multi-user.target

Pending OS-Updates: 0
Pending iob updates: 0

Nodejs-Installation:
/usr/bin/nodejs v20.18.0
/usr/bin/node v20.18.0
/usr/bin/npm 10.8.2
/usr/bin/npx 10.8.2
/usr/bin/corepack 0.29.3

Recommended versions are nodejs 20.18.0 and npm 10.8.2
nodeJS installation is correct

MEMORY:
total used free shared buff/cache available
Mem: 4.3G 1.8G 2.1G 114K 470M 2.5G
Swap: 536M 0B 536M
Total: 4.8G 1.8G 2.6G

Active iob-Instances: 25
Upgrade policy: none

ioBroker Core: js-controller 6.0.11
admin 7.1.5

ioBroker Status: iobroker is running on this host.

Objects type: jsonl
States type: jsonl

Status admin and web instance:

• system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin
• system.adapter.web.0 : web : iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin

Objects: 10290
States: 6704

Size of iob-Database:

31M /opt/iobroker/iobroker-data/objects.jsonl
2.8M /opt/iobroker/iobroker-data/states.jsonl

Unknown release codenamed ''. Please check yourself if the Operating System is actively maintained.

=================== END OF SUMMARY ====================

[Thomas Braun]

@svaggy sagte in Skript funktionieren nicht nach Neustart:

Funktioniert leider immer noch nicht.

Aber jetzt ist die Ausgangsbasis eine andere.

Objects: 10290
States: 6704

sieht schon mal anders aus.

[Svaggy]

Habt ihr noch Ideen, was ich machen kann/ probieren sollte?

[Ro75]

@svaggy auf welcher Logstufe steht der JS-Adapter?

Ro75.

[Svaggy]

@ro75 Meinst du die Protokollebene? Die steht auf "info"

[Ro75]

@svaggy OK. Was taucht denn im Log nach einem Neustart vom Docker-Container bzgl. JS/JS-Adapter auf. Alos bei mir kommen auf alle Fälle ne Menge an Einträgen. Jeder Start eines Skriptes wird dokumentiert. Also, wie sieht es bei dir konkret aus?

Ro75.

[Svaggy]

@ro75

Wenn ich die "Testinstanz" starte kommt das. Hierbei auch der untenstehende Fehler:

javascript.1
2024-11-08 18:24:21.401 error Cannot find view "script" for search "javascript"

javascript.1
2024-11-08 18:24:21.346 info received all objects

javascript.1
2024-11-08 18:24:21.124 info received all states

javascript.1
2024-11-08 18:24:20.698 info requesting all objects

javascript.1
2024-11-08 18:24:20.697 info requesting all states

javascript.1
2024-11-08 18:24:20.401 info starting. Version 8.8.3 in /opt/iobroker/node_modules/iobroker.javascript, node: v20.18.0, js-controller: 6.0.11

[Ro75]

@svaggy bitte den Container neu starten lassen und dann das gesamte Log mal rein.

Ro75.

[Thomas Braun]

@svaggy

Das Log am besten aus

iob logs

nehmen und in CodeTags posten. Das ist besser formatiert und chronologisch sortiert.

[Svaggy]

@thomas-braun
Bekomme den log hier nicht rein iob logs ist zeitlich abgeschnitten und für ein Reinkopieren hat er zu viel Zeichen..

[Thomas Braun]

@svaggy sagte in Skript funktionieren nicht nach Neustart:

iob logs ist zeitlich abgeschnitten

Nein, das ist eben nicht abgeschnitten, das ist immer das volle log seit 0 Uhr.
Es interessiert aber eh im Moment nur der Neustart des adapters.

[Svaggy]

@thomas-braun

Reicht das?

2024-11-08 19:06:51.057  - info: host.iobroker "system.adapter.javascript.1" disabled
2024-11-08 19:06:51.057  - info: host.iobroker stopInstance system.adapter.javascript.1 (force=false, process=true)
2024-11-08 19:06:51.060  - info: javascript.1 (2032) Got terminate signal TERMINATE_YOURSELF
2024-11-08 19:06:51.062  - info: javascript.1 (2032) terminating
2024-11-08 19:06:51.063  - info: javascript.1 (2032) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2024-11-08 19:06:51.100  - info: host.iobroker stopInstance system.adapter.javascript.1 send kill signal
2024-11-08 19:06:51.561  - info: javascript.1 (2032) terminating
2024-11-08 19:06:51.599  - info: host.iobroker instance system.adapter.javascript.1 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2024-11-08 19:06:52.309  - info: host.iobroker "system.adapter.javascript.1" enabled
2024-11-08 19:06:52.582  - info: host.iobroker instance system.adapter.javascript.1 in version "8.8.3" started with pid 2047
2024-11-08 19:06:53.565  - info: javascript.1 (2047) starting. Version 8.8.3 in /opt/iobroker/node_modules/iobroker.javascript, node: v20.18.0, js-controller: 6.0.11
2024-11-08 19:06:53.810  - info: javascript.1 (2047) requesting all states
2024-11-08 19:06:53.811  - info: javascript.1 (2047) requesting all objects
2024-11-08 19:06:54.226  - info: javascript.1 (2047) received all states
2024-11-08 19:06:54.442  - info: javascript.1 (2047) received all objects
2024-11-08 19:06:54.493  - error: javascript.1 (2047) Cannot find view "script" for search "javascript"

[Thomas Braun]

@svaggy

Und was ist mit javascript.0?
Warum überhaupt zwei Instanzen?