NEWS
Rechteprobleme von backitup nach fixer-Lauf
-
Ist aber imho was für einen separaten Thread. Das hat mit der Umstellung auf root-less nix zu tun.
-
Ok, wenn nach Deiner Einschätzung kein Zusammenhang besteht, dann mach ich das so.
Vielen Dank!
-
@xxjooo sagte in Rechteprobleme nachvUmzug:
dann mach ich das so.
hab ich schon
bitte Threadtitel anpassen -
-
@thomas-braun sagte in Rechteprobleme nachvUmzug:
Zeig mal die Ausgaben von
mount | sort ls -l /opt/iobroker/ getfacl /opt/iobroker/backups
Die Ergebnisse kommen gleich. Habe aber etwas manipuliert und dehalb läuft backitup gerade durch, anscheinend ohne Fehler. Das Problem liegt bei den Rechten des Ordners /opt/iobroker/backitup, der auch nach dem erfolgreichen Lauf des fixers genau so dasteht, wie oben gezeigt
d--------- 1 iobroker iobroker 10488 20. Okt 13:33 backups
Ich habe dann ein
sudo chmod 755 backups
abgesetzt und backitup neu gestartet, das läuft gerade durch.
23:03:22.160INFOguiDas Backup wurde erfolgreich erstellt!
Nachdem ich das geändert habe sind die Ausgaben Deiner gewünschten Abfragen natürlich nicht mehr so wie vor meiner Änderung. Aber wenn Du sagst, dass meine Änderung der Rechte des Ordners /opt/iobroker/backup in Ordnung sind, weil es ja so durchgelaufen ist, dann würde ich das hier beenden können...
Sonst setze ich das wieder zurück und schick noch die Ausgaben auf Deine Fragen...
-
@xxjooo sagte in Rechteprobleme nachvUmzug:
Aber wenn Du sagst, dass meine Änderung der Rechte des Ordners /opt/iobroker/backup in Ordnung sind, weil es ja so durchgelaufen ist, dann würde ich das hier beenden können...
Auf dem Verzeichnis liegen ACLs, mit den herkömmlichen Rechten kommst du da nicht dauerhaft weiter.
Es sollte da so aussehen:
echad@chet:~ $ getfacl /opt/iobroker/backups/ getfacl: Removing leading '/' from absolute path names # file: opt/iobroker/backups/ # owner: iobroker # group: iobroker user::rwx group::r-x group:iobroker:rwx mask::rwx other::r-x default:user::rwx default:group::r-x default:group:iobroker:rwx default:mask::rwx default:other::r-x
-
@thomas-braun sagte in Rechteprobleme von backitup nach fixer-Lauf:
@xxjooo sagte in Rechteprobleme nachvUmzug:
Aber wenn Du sagst, dass meine Änderung der Rechte des Ordners /opt/iobroker/backup in Ordnung sind, weil es ja so durchgelaufen ist, dann würde ich das hier beenden können...
Auf dem Verzeichnis liegen ACLs, mit den herkömmlichen Rechten kommst du da nicht dauerhaft weiter.
Es sollte da so aussehen:
echad@chet:~ $ getfacl /opt/iobroker/backups/ getfacl: Removing leading '/' from absolute path names # file: opt/iobroker/backups/ # owner: iobroker # group: iobroker user::rwx group::r-x group:iobroker:rwx mask::rwx other::r-x default:user::rwx default:group::r-x default:group:iobroker:rwx default:mask::rwx default:other::r-x
bei mir:
jo@ioBrokerDebian10VM:/opt/iobroker$ getfacl /opt/iobroker/backups/ getfacl: Entferne führende '/' von absoluten Pfadnamen # file: opt/iobroker/backups/ # owner: iobroker # group: iobroker user::rwx group::r-x group:iobroker:rwx mask::rwx other::r-x default:user::rwx default:group::r-x default:group:iobroker:rwx default:mask::rwx default:other::r-x
also exakt gleich...
-
Ja, das hat der Fixer so gesetzt.
Dann sollte das ja nun wieder funktionieren.
Wie schaut das große Ganze aus?
Maliob diag
anschauen.
-
@thomas-braun sagte in Rechteprobleme von backitup nach fixer-Lauf:
iob diag
zumindest keine Katastrophen:
========== Start marking the full check here =========== ```bash Script v.2024-10-19 *** BASE SYSTEM *** Static hostname: ioBrokerDebian10VM Icon name: computer-vm Chassis: vm 🖴 Virtualization: kvm Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-26-amd64 Architecture: x86-64 Hardware Vendor: QEMU Hardware Model: Standard PC _i440FX + PIIX, 1996_ Firmware Version: rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org OS is similar to: model name : Common KVM processor Docker : false Virtualization : kvm Kernel : x86_64 Userland : 64 bit Systemuptime and Load: 23:22:24 up 1:07, 2 users, load average: 0.70, 0.55, 0.68 CPU threads: 8 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'bookworm'! *** TIME AND TIMEZONES *** Local time: Thu 2024-10-31 23:22:24 CET Universal time: Thu 2024-10-31 22:22:24 UTC RTC time: Thu 2024-10-31 22:22:24 Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': jo HOME=/home/jo GROUPS=jo adm dialout cdrom floppy sudo audio dip video plugdev users netdev iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout sudo audio video plugdev bluetooth *** DISPLAY-SERVER SETUP *** Display-Server: false Desktop: Terminal: tty *** MEMORY *** total used free shared buff/cache available Mem: 8.3G 3.3G 231M 544K 5.1G 5.0G Swap: 0B 0B 0B Total: 8.3G 3.3G 231M Active iob-Instances: 31 7940 M total memory 3155 M used memory 508 M active memory 6422 M inactive memory 220 M free memory 314 M buffer memory 4549 M swap cache 0 M total swap 0 M used swap 0 M free swap *** top - Table Of Processes *** top - 23:22:25 up 1:07, 2 users, load average: 0.70, 0.55, 0.68 Tasks: 140 total, 1 running, 139 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 25.0 sy, 0.0 ni, 75.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 7940.7 total, 219.1 free, 3156.5 used, 4864.2 buff/cache MiB Swap: 0.0 total, 0.0 free, 0.0 used. 4784.2 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.9G 0 3.9G 0% /dev tmpfs tmpfs 795M 532K 794M 1% /run /dev/sda1 ext4 59G 38G 19G 67% / tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs tmpfs 795M 0 795M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Thu Oct 31 22:15:17 2024] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [Thu Oct 31 22:15:17 2024] EXT4-fs (sda1): re-mounted. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/sda1 ext4 rw,noatime Files in neuralgic directories: /var: 1.9G /var/ 1.6G /var/log/journal/fc6bd0ba028b42bb9c62f77882022818 1.6G /var/log/journal 1.6G /var/log 139M /var/lib Archived and active journals take up 1.5G in the file system. /opt/iobroker/backups: 4.0K /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 16G /opt/iobroker/iobroker-data/ 15G /opt/iobroker/iobroker-data/history 1.1G /opt/iobroker/iobroker-data/files 618M /opt/iobroker/iobroker-data/files/javascript.admin 561M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 43M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.c9e0f545.js.map 40M /opt/iobroker/iobroker-data/states.jsonl 34M /opt/iobroker/iobroker-data/objects.jsonl 27M /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map 19M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.6964fae2.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0014D9D6A3-if00 HINT: Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting: /dev/ttyACM0 *** NodeJS-Installation *** /usr/bin/nodejs v18.20.4 /usr/bin/node v18.20.4 /usr/bin/npm 10.8.2 /usr/bin/npx 10.8.2 /usr/bin/corepack 0.28.0 nodejs: Installed: 18.20.4-1nodesource1 Candidate: 18.20.4-1nodesource1 Version table: *** 18.20.4-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 100 /var/lib/dpkg/status 18.20.3-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.20.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.20.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.19.0+dfsg-6~deb12u2 500 500 http://deb.debian.org/debian bookworm/main amd64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://security.debian.org/debian-security bookworm-security/main amd64 Packages 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: ioBrokerDebian10VM ioBrokerDebian10VM (version: 7.0.2, hostname: ioBrokerDebian10VM, alive, uptime: 3921) Core adapters versions js-controller: 7.0.2 admin: 7.2.6 javascript: 8.8.3 nodejs modules from github: 1 +-- iobroker.icons-open-icon-library-png@0.1.3 (git+ssh://git@github.com/ioBroker/ioBroker.icons-open-icon-library-png.git#0847a79d713ee6725ccb6ccfb044c025b73ec946) Adapter State + system.adapter.admin.0 : admin : ioBrokerDebian10VM - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.alexa2.0 : alexa2 : ioBrokerDebian10VM - enabled + system.adapter.backitup.0 : backitup : ioBrokerDebian10VM - enabled system.adapter.daswetter.0 : daswetter : ioBrokerDebian10VM - enabled system.adapter.dwd.0 : dwd : ioBrokerDebian10VM - enabled + system.adapter.fb-checkpresence.0 : fb-checkpresence : ioBrokerDebian10VM - enabled system.adapter.feiertage.0 : feiertage : ioBrokerDebian10VM - enabled system.adapter.flot.0 : flot : ioBrokerDebian10VM - disabled + system.adapter.govee.0 : govee : ioBrokerDebian10VM - enabled + system.adapter.harmony.0 : harmony : ioBrokerDebian10VM - enabled + system.adapter.history.0 : history : ioBrokerDebian10VM - enabled + system.adapter.hm-rega.0 : hm-rega : ioBrokerDebian10VM - enabled + system.adapter.hm-rpc.2 : hm-rpc : ioBrokerDebian10VM - enabled, port: 12010 system.adapter.ical.0 : ical : ioBrokerDebian10VM - enabled system.adapter.icons-icons8.0 : icons-icons8 : ioBrokerDebian10VM - disabled system.adapter.icons-material-png.0 : icons-material-png : ioBrokerDebian10VM - disabled system.adapter.icons-mfd-png.0 : icons-mfd-png : ioBrokerDebian10VM - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : ioBrokerDebian10VM - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: ioBrokerDebian10VM - disabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : ioBrokerDebian10VM - disabled + system.adapter.influxdb.0 : influxdb : ioBrokerDebian10VM - enabled, port: 8086 + system.adapter.iot.0 : iot : ioBrokerDebian10VM - enabled + system.adapter.javascript.0 : javascript : ioBrokerDebian10VM - enabled system.adapter.javascript.1 : javascript : ioBrokerDebian10VM - disabled + system.adapter.lgtv.0 : lgtv : ioBrokerDebian10VM - enabled + system.adapter.mihome.0 : mihome : ioBrokerDebian10VM - enabled, port: 9898, bind: 192.168.178.6 system.adapter.mobile.0 : mobile : ioBrokerDebian10VM - disabled system.adapter.mqtt.0 : mqtt : ioBrokerDebian10VM - disabled, port: 11883, bind: 0.0.0.0 + system.adapter.node-red.0 : node-red : ioBrokerDebian10VM - enabled, port: 1880, bind: 0.0.0.0 system.adapter.openweathermap.0 : openweathermap : ioBrokerDebian10VM - enabled + system.adapter.pi-hole.0 : pi-hole : ioBrokerDebian10VM - enabled + system.adapter.pi-hole.1 : pi-hole : ioBrokerDebian10VM - enabled + system.adapter.proxmox.0 : proxmox : ioBrokerDebian10VM - enabled, port: 8006 + system.adapter.pvforecast.0 : pvforecast : ioBrokerDebian10VM - enabled system.adapter.pvforecast.1 : pvforecast : ioBrokerDebian10VM - disabled system.adapter.radar2.0 : radar2 : ioBrokerDebian10VM - disabled + system.adapter.rest-api.0 : rest-api : ioBrokerDebian10VM - enabled, port: 8093, bind: 0.0.0.0, run as: rest + system.adapter.shelly.0 : shelly : ioBrokerDebian10VM - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : ioBrokerDebian10VM - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.socketio.0 : socketio : ioBrokerDebian10VM - enabled, port: 8084, bind: 192.168.178.6, run as: admin + system.adapter.sonoff.0 : sonoff : ioBrokerDebian10VM - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.tankerkoenig.0 : tankerkoenig : ioBrokerDebian10VM - enabled + system.adapter.telegram.0 : telegram : ioBrokerDebian10VM - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.tesla-motors.0 : tesla-motors : ioBrokerDebian10VM - enabled + system.adapter.tesla-wallconnector3.0 : tesla-wallconnector3 : ioBrokerDebian10VM - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : ioBrokerDebian10VM - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : ioBrokerDebian10VM - disabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : ioBrokerDebian10VM - disabled system.adapter.vis-justgage.0 : vis-justgage : ioBrokerDebian10VM - disabled system.adapter.vis-material-advanced.0 : vis-material-advanced : ioBrokerDebian10VM - disabled system.adapter.vis-materialdesign.0 : vis-materialdesign : ioBrokerDebian10VM - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : ioBrokerDebian10VM - disabled system.adapter.vis-weather.0 : vis-weather : ioBrokerDebian10VM - disabled system.adapter.vis.0 : vis : ioBrokerDebian10VM - enabled system.adapter.weatherunderground.0 : weatherunderground : ioBrokerDebian10VM - enabled + system.adapter.web.0 : web : ioBrokerDebian10VM - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : ioBrokerDebian10VM - enabled, port: /dev/ttyACM0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : ioBrokerDebian10VM - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.hm-rpc.2 : hm-rpc : ioBrokerDebian10VM - enabled, port: 12010 + system.adapter.influxdb.0 : influxdb : ioBrokerDebian10VM - enabled, port: 8086 + system.adapter.mihome.0 : mihome : ioBrokerDebian10VM - enabled, port: 9898, bind: 192.168.178.6 + system.adapter.node-red.0 : node-red : ioBrokerDebian10VM - enabled, port: 1880, bind: 0.0.0.0 + system.adapter.proxmox.0 : proxmox : ioBrokerDebian10VM - enabled, port: 8006 + system.adapter.rest-api.0 : rest-api : ioBrokerDebian10VM - enabled, port: 8093, bind: 0.0.0.0, run as: rest + system.adapter.shelly.0 : shelly : ioBrokerDebian10VM - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : ioBrokerDebian10VM - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.socketio.0 : socketio : ioBrokerDebian10VM - enabled, port: 8084, bind: 192.168.178.6, run as: admin + system.adapter.sonoff.0 : sonoff : ioBrokerDebian10VM - enabled, port: 1883, bind: 0.0.0.0 + system.adapter.telegram.0 : telegram : ioBrokerDebian10VM - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : ioBrokerDebian10VM - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : ioBrokerDebian10VM - enabled, port: /dev/ttyACM0 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): beta Upgrade policy: none Installed ioBroker-Instances Used repository: beta Adapter "admin" : 7.2.6 , installed 7.2.6 Adapter "alexa2" : 3.26.7 , installed 3.26.7 Adapter "backitup" : 3.0.26 , installed 3.0.26 Adapter "daswetter" : 3.1.16 , installed 3.1.16 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "fb-checkpresence": 1.2.5 , installed 1.2.5 Adapter "feiertage" : 1.2.0 , installed 1.2.0 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "harmony" : 1.5.0 , installed 1.5.0 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hm-rega" : 5.1.0 , installed 5.1.0 Adapter "hm-rpc" : 2.0.2 , installed 2.0.2 Adapter "ical" : 1.16.0 , installed 1.16.0 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.3 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "iot" : 3.4.2 , installed 3.4.2 Adapter "javascript" : 8.8.3 , installed 8.8.3 Controller "js-controller": 7.0.2 , installed 7.0.2 Adapter "lgtv" : 2.2.0 , installed 2.2.0 Adapter "mihome" : 1.4.0 , installed 1.4.0 Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "mqtt" : 6.1.2 , installed 6.1.2 Adapter "node-red" : 5.2.1 , installed 5.2.1 Adapter "openweathermap": 1.1.2 , installed 1.1.2 Adapter "pi-hole" : 1.3.6 , installed 1.3.6 Adapter "proxmox" : 2.3.0 , installed 2.3.0 Adapter "pvforecast" : 4.0.1 , installed 4.0.1 Adapter "radar2" : 2.2.0 , installed 2.2.0 Adapter "rest-api" : 2.0.3 , installed 2.0.3 Adapter "shelly" : 8.4.0 , installed 8.4.0 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.1 , installed 6.7.1 Adapter "sonoff" : 3.2.1 , installed 3.2.1 Adapter "tankerkoenig" : 3.4.0 , installed 3.4.0 Adapter "telegram" : 3.9.0 , installed 3.9.0 Adapter "tesla-motors" : 1.4.5 , installed 1.4.5 Adapter "tesla-wallconnector3": 0.1.3, installed 0.1.3 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-hqwidgets": 1.5.1 , installed 1.5.1 Adapter "vis-jqui-mfd" : 1.1.1 , installed 1.1.1 Adapter "vis-justgage" : 2.1.7 , installed 2.1.7 Adapter "vis-material-advanced": 1.7.4, installed 1.7.4 Adapter "vis-materialdesign": 0.5.9, installed 0.5.9 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.9 , installed 2.5.9 Adapter "weatherunderground": 3.7.0, installed 3.7.0 Adapter "web" : 6.3.1 , installed 6.3.1 Adapter "ws" : 2.6.2 , installed 2.6.2 Adapter "zigbee" : 1.10.3 , installed 1.10.3 Objects and States Please stand by - This may take a while Objects: 35608 States: 35193 *** OS-Repositories and Updates *** Hit:1 http://security.debian.org/debian-security bookworm-security InRelease Hit:2 http://deb.debian.org/debian bookworm InRelease Hit:3 http://deb.debian.org/debian bookworm-updates InRelease Hit:4 http://ftp.debian.org/debian bookworm-backports InRelease Hit:5 https://repos.influxdata.com/debian stable InRelease Hit:6 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 19100 1592/iobroker.js-co tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 21222 1592/iobroker.js-co tcp 0 0 192.168.178.6:8084 0.0.0.0:* LISTEN 1001 26486 2132/io.socketio.0 tcp 0 0 192.168.178.6:12010 0.0.0.0:* LISTEN 1001 25359 1779/io.hm-rpc.2 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 17140 480/sshd: /usr/sbin tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 15518 1/init tcp 0 0 0.0.0.0:1883 0.0.0.0:* LISTEN 1001 26248 1945/io.sonoff.0 tcp 0 0 0.0.0.0:1880 0.0.0.0:* LISTEN 1001 22818 1846/node-red tcp6 0 0 :::8087 :::* LISTEN 1001 26794 2117/io.simple-api. tcp6 0 0 :::8082 :::* LISTEN 1001 23821 2001/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 22574 1610/io.admin.0 tcp6 0 0 :::8093 :::* LISTEN 1001 26585 2206/io.rest-api.0 tcp6 0 0 :::22 :::* LISTEN 0 17142 480/sshd: /usr/sbin tcp6 0 0 :::111 :::* LISTEN 0 15519 1/init tcp6 0 0 :::61991 :::* LISTEN 1001 22770 1761/io.harmony.0 udp 0 0 0.0.0.0:48959 0.0.0.0:* 1001 26598 1724/io.backitup.0 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 15827 379/dhclient udp 0 0 0.0.0.0:111 0.0.0.0:* 0 14453 1/init udp 0 0 0.0.0.0:61991 0.0.0.0:* 1001 22771 1761/io.harmony.0 udp 0 0 0.0.0.0:50069 0.0.0.0:* 1001 37425 1724/io.backitup.0 udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 22893 1930/io.shelly.0 udp 0 0 0.0.0.0:9898 0.0.0.0:* 1001 26151 1863/io.mihome.0 udp6 0 0 :::111 :::* 0 14454 1/init *** Log File - Last 25 Lines *** 2024-10-31 23:21:42.090 - info: tesla-wallconnector3.0 (2259) REPORT_TO_DEV: State attribute definition missing for: version.git_branch, Val: HEAD 2024-10-31 23:21:42.271 - info: tesla-wallconnector3.0 (2259) REPORT_TO_DEV: State attribute definition missing for: vitals.evse_not_ready_reasons, Val: 1 2024-10-31 23:21:46.982 - info: node-red.0 (1846) State value to set for "0_userdata.0.Huawei.Inverter.Efficiency" has to be stringified but received type "object" 2024-10-31 23:21:52.361 - info: tesla-wallconnector3.0 (2259) REPORT_TO_DEV: State attribute definition missing for: version.git_branch, Val: HEAD 2024-10-31 23:21:52.532 - info: tesla-wallconnector3.0 (2259) REPORT_TO_DEV: State attribute definition missing for: vitals.evse_not_ready_reasons, Val: 1 2024-10-31 23:22:02.606 - info: tesla-wallconnector3.0 (2259) REPORT_TO_DEV: State attribute definition missing for: version.git_branch, Val: HEAD 2024-10-31 23:22:02.784 - info: tesla-wallconnector3.0 (2259) REPORT_TO_DEV: State attribute definition missing for: vitals.evse_not_ready_reasons, Val: 1 2024-10-31 23:22:06.202 - info: node-red.0 (1846) State value to set for "0_userdata.0.Huawei.Inverter.Insulation_Resistance" has to be stringified but received type "object" 2024-10-31 23:22:12.850 - info: tesla-wallconnector3.0 (2259) REPORT_TO_DEV: State attribute definition missing for: version.git_branch, Val: HEAD 2024-10-31 23:22:13.034 - info: tesla-wallconnector3.0 (2259) REPORT_TO_DEV: State attribute definition missing for: vitals.evse_not_ready_reasons, Val: 1 2024-10-31 23:22:23.118 - info: tesla-wallconnector3.0 (2259) REPORT_TO_DEV: State attribute definition missing for: version.git_branch, Val: HEAD 2024-10-31 23:22:23.311 - info: tesla-wallconnector3.0 (2259) REPORT_TO_DEV: State attribute definition missing for: vitals.evse_not_ready_reasons, Val: 1 2024-10-31 23:22:27.010 - info: node-red.0 (1846) State value to set for "0_userdata.0.Huawei.Inverter.Power_Grid_Voltage" has to be stringified but received type "number" 2024-10-31 23:22:33.397 - info: tesla-wallconnector3.0 (2259) REPORT_TO_DEV: State attribute definition missing for: version.git_branch, Val: HEAD 2024-10-31 23:22:33.556 - info: tesla-wallconnector3.0 (2259) REPORT_TO_DEV: State attribute definition missing for: vitals.evse_not_ready_reasons, Val: 1 2024-10-31 23:22:40.772 - info: node-red.0 (1846) State value to set for "0_userdata.0.Huawei.Inverter.Insulation_Resistance" has to be stringified but received type "object" 2024-10-31 23:22:43.090 - info: node-red.0 (1846) State value to set for "0_userdata.0.Huawei.Inverter.Model_ID" has to be stringified but received type "object" 2024-10-31 23:22:43.637 - info: tesla-wallconnector3.0 (2259) REPORT_TO_DEV: State attribute definition missing for: version.git_branch, Val: HEAD 2024-10-31 23:22:43.802 - info: tesla-wallconnector3.0 (2259) REPORT_TO_DEV: State attribute definition missing for: vitals.evse_not_ready_reasons, Val: 1 2024-10-31 23:22:53.898 - info: tesla-wallconnector3.0 (2259) REPORT_TO_DEV: State attribute definition missing for: version.git_branch, Val: HEAD 2024-10-31 23:22:54.088 - info: tesla-wallconnector3.0 (2259) REPORT_TO_DEV: State attribute definition missing for: vitals.evse_not_ready_reasons, Val: 1 2024-10-31 23:23:04.178 - info: tesla-wallconnector3.0 (2259) REPORT_TO_DEV: State attribute definition missing for: version.git_branch, Val: HEAD 2024-10-31 23:23:04.348 - info: tesla-wallconnector3.0 (2259) REPORT_TO_DEV: State attribute definition missing for: vitals.evse_not_ready_reasons, Val: 1 2024-10-31 23:23:14.419 - info: tesla-wallconnector3.0 (2259) REPORT_TO_DEV: State attribute definition missing for: version.git_branch, Val: HEAD 2024-10-31 23:23:14.611 - info: tesla-wallconnector3.0 (2259) REPORT_TO_DEV: State attribute definition missing for: vitals.evse_not_ready_reasons, Val: 1
============ Mark until here for C&P =============
-
@xxjooo sagte in Rechteprobleme von backitup nach fixer-Lauf:
zumindest keine Katastrophen
Stimmt.
Ich würde den Zigbee-Stick/Adapter noch auf 'by-id' umstellen und nodejs@20 fahren. -
vielen Dank, morgen ist Zeit dafür. Schönes WE!